##
. $(dirname $0)/tools_common.sh
-TEST_FRAMES=10
+readonly TEST_FRAMES=10
# Environment check: Make sure input is available.
vpxenc_verify_environment() {
if [ ! -e "${YUV_RAW_INPUT}" ]; then
- echo "The file ${YUV_RAW_INPUT##*/} must exist in LIBVPX_TEST_DATA_PATH."
+ elog "The file ${YUV_RAW_INPUT##*/} must exist in LIBVPX_TEST_DATA_PATH."
+ return 1
+ fi
+ if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then
+ if [ ! -e "${Y4M_NOSQ_PAR_INPUT}" ]; then
+ elog "The file ${Y4M_NOSQ_PAR_INPUT##*/} must exist in"
+ elog "LIBVPX_TEST_DATA_PATH."
+ return 1
+ fi
+ fi
+ if [ -z "$(vpx_tool_path vpxenc)" ]; then
+ elog "vpxenc not found. It must exist in LIBVPX_BIN_PATH or its parent."
return 1
fi
}
vpxenc_can_encode_vp8() {
- if [ "$(vpxenc_available)" = "yes" ] && \
- [ "$(vp8_encode_available)" = "yes" ]; then
+ if [ "$(vp8_encode_available)" = "yes" ]; then
echo yes
fi
}
vpxenc_can_encode_vp9() {
- if [ "$(vpxenc_available)" = "yes" ] && \
- [ "$(vp9_encode_available)" = "yes" ]; then
+ if [ "$(vp9_encode_available)" = "yes" ]; then
echo yes
fi
}
-# Echoes yes to stdout when vpxenc exists according to vpx_tool_available().
-vpxenc_available() {
- [ -n $(vpx_tool_available vpxenc) ] && echo yes
+# Echo vpxenc command line parameters allowing use of
+# hantro_collage_w352h288.yuv as input.
+yuv_input_hantro_collage() {
+ echo ""${YUV_RAW_INPUT}"
+ --width="${YUV_RAW_INPUT_WIDTH}"
+ --height="${YUV_RAW_INPUT_HEIGHT}""
+}
+
+y4m_input_non_square_par() {
+ echo ""${Y4M_NOSQ_PAR_INPUT}""
+}
+
+y4m_input_720p() {
+ echo ""${Y4M_720P_INPUT}""
}
-# Wrapper function for running vpxenc. Positional parameters are interpreted as
-# follows:
-# 1 - codec name
-# 2 - input width
-# 3 - input height
-# 4 - number of frames to encode
-# 5 - path to input file
-# 6 - path to output file
-# Note: The output file path must end in .ivf to output an IVF file.
-# 7 - extra flags
-# Note: Extra flags currently supports a special case: when set to "-"
-# input is piped to vpxenc via cat.
+# Echo default vpxenc real time encoding params. $1 is the codec, which defaults
+# to vp8 if unspecified.
+vpxenc_rt_params() {
+ local readonly codec="${1:-vp8}"
+ echo "--codec=${codec}
+ --buf-initial-sz=500
+ --buf-optimal-sz=600
+ --buf-sz=1000
+ --cpu-used=-6
+ --end-usage=cbr
+ --error-resilient=1
+ --kf-max-dist=90000
+ --lag-in-frames=0
+ --max-intra-rate=300
+ --max-q=56
+ --min-q=2
+ --noise-sensitivity=0
+ --overshoot-pct=50
+ --passes=1
+ --profile=0
+ --resize-allowed=0
+ --rt
+ --static-thresh=0
+ --undershoot-pct=50"
+}
+
+# Wrapper function for running vpxenc with pipe input. Requires that
+# LIBVPX_BIN_PATH points to the directory containing vpxenc. $1 is used as the
+# input file path and shifted away. All remaining parameters are passed through
+# to vpxenc.
+vpxenc_pipe() {
+ local readonly encoder="$(vpx_tool_path vpxenc)"
+ local readonly input="$1"
+ shift
+ cat "${input}" | eval "${VPX_TEST_PREFIX}" "${encoder}" - \
+ --test-decode=fatal \
+ "$@" ${devnull}
+}
+
+# Wrapper function for running vpxenc. Requires that LIBVPX_BIN_PATH points to
+# the directory containing vpxenc. $1 one is used as the input file path and
+# shifted away. All remaining parameters are passed through to vpxenc.
vpxenc() {
- local encoder="${LIBVPX_BIN_PATH}/vpxenc${VPX_TEST_EXE_SUFFIX}"
- local codec="${1}"
- local width=${2}
- local height=${3}
- local frames=${4}
- local input=${5}
- local output="${VPX_TEST_OUTPUT_DIR}/${6}"
- local extra_flags=${7}
-
- # Because --ivf must be within the command line to get IVF from vpxenc.
- if echo "${output}" | egrep -q 'ivf$'; then
- use_ivf=--ivf
- else
- unset use_ivf
- fi
-
- if [ "${extra_flags}" = "-" ]; then
- pipe_input=yes
- extra_flags=${8}
- else
- unset pipe_input
- fi
-
- if [ -z "${pipe_input}" ]; then
- eval "${VPX_TEST_PREFIX}" "${encoder}" --codec=${codec} --width=${width} \
- --height=${height} --limit=${frames} ${use_ivf} ${extra_flags} \
- --output="${output}" "${input}" ${devnull}
- else
- cat "${input}" \
- | eval "${VPX_TEST_PREFIX}" "${encoder}" --codec=${codec} \
- --width=${width} --height=${height} --limit=${frames} ${use_ivf} \
- ${extra_flags} --output="${output}" - ${devnull}
- fi
-
- if [ ! -e "${output}" ]; then
- # Return non-zero exit status: output file doesn't exist, so something
- # definitely went wrong.
- return 1
- fi
+ local readonly encoder="$(vpx_tool_path vpxenc)"
+ local readonly input="$1"
+ shift
+ eval "${VPX_TEST_PREFIX}" "${encoder}" "${input}" \
+ --test-decode=fatal \
+ "$@" ${devnull}
}
vpxenc_vp8_ivf() {
if [ "$(vpxenc_can_encode_vp8)" = "yes" ]; then
- vpxenc vp8 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
- "${YUV_RAW_INPUT}" vp8.ivf
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8.ivf"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp8 \
+ --limit="${TEST_FRAMES}" \
+ --ivf \
+ --output="${output}"
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
fi
}
-vpxenc_vp8_ivf_pipe_input() {
- if [ "$(vpxenc_can_encode_vp8)" = "yes" ]; then
- vpxenc vp8 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
- "${YUV_RAW_INPUT}" vp8.ivf -
+vpxenc_vp8_webm() {
+ if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8.webm"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp8 \
+ --limit="${TEST_FRAMES}" \
+ --output="${output}"
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
fi
}
-vpxenc_vp8_webm() {
- if [ "$(vpxenc_can_encode_vp8)" = "yes" ] &&
- [ "$(webm_io_available)" = "yes" ] ; then
- vpxenc vp8 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
- "${YUV_RAW_INPUT}" vp8.webm
+vpxenc_vp8_webm_rt() {
+ if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8_rt.webm"
+ vpxenc $(yuv_input_hantro_collage) \
+ $(vpxenc_rt_params vp8) \
+ --output="${output}"
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
+ fi
+}
+
+vpxenc_vp8_webm_2pass() {
+ if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8.webm"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp8 \
+ --limit="${TEST_FRAMES}" \
+ --output="${output}" \
+ --passes=2
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
+ fi
+}
+
+vpxenc_vp8_webm_lag10_frames20() {
+ if [ "$(vpxenc_can_encode_vp8)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly lag_total_frames=20
+ local readonly lag_frames=10
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8_lag10_frames20.webm"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp8 \
+ --limit="${lag_total_frames}" \
+ --lag-in-frames="${lag_frames}" \
+ --output="${output}" \
+ --auto-alt-ref=1 \
+ --passes=2
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
+ fi
+}
+
+vpxenc_vp8_ivf_piped_input() {
+ if [ "$(vpxenc_can_encode_vp8)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp8_piped_input.ivf"
+ vpxenc_pipe $(yuv_input_hantro_collage) \
+ --codec=vp8 \
+ --limit="${TEST_FRAMES}" \
+ --ivf \
+ --output="${output}"
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
fi
}
vpxenc_vp9_ivf() {
if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then
- vpxenc vp9 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
- "${YUV_RAW_INPUT}" vp9.ivf
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9.ivf"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp9 \
+ --limit="${TEST_FRAMES}" \
+ --ivf \
+ --output="${output}"
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
fi
}
vpxenc_vp9_webm() {
- if [ "$(vpxenc_can_encode_vp9)" = "yes" ] &&
- [ "$(webm_io_available)" = "yes" ] ; then
- vpxenc vp9 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
- "${YUV_RAW_INPUT}" vp9.webm
+ if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9.webm"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp9 \
+ --limit="${TEST_FRAMES}" \
+ --output="${output}"
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
+ fi
+}
+
+vpxenc_vp9_webm_rt() {
+ if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_rt.webm"
+ vpxenc $(yuv_input_hantro_collage) \
+ $(vpxenc_rt_params vp9) \
+ --output="${output}"
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
+ fi
+}
+
+vpxenc_vp9_webm_rt_multithread_tiled() {
+ if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_rt_multithread_tiled.webm"
+ local readonly tilethread_min=2
+ local readonly tilethread_max=4
+ local readonly num_threads="$(seq ${tilethread_min} ${tilethread_max})"
+ local readonly num_tile_cols="$(seq ${tilethread_min} ${tilethread_max})"
+
+ for threads in ${num_threads}; do
+ for tile_cols in ${num_tile_cols}; do
+ vpxenc $(y4m_input_720p) \
+ $(vpxenc_rt_params vp9) \
+ --threads=${threads} \
+ --tile-columns=${tile_cols} \
+ --output="${output}"
+ done
+ done
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
+
+ rm "${output}"
+ fi
+}
+
+vpxenc_vp9_webm_2pass() {
+ if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9.webm"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp9 \
+ --limit="${TEST_FRAMES}" \
+ --output="${output}" \
+ --passes=2
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
fi
}
vpxenc_vp9_ivf_lossless() {
if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then
- vpxenc vp9 ${YUV_RAW_INPUT_WIDTH} ${YUV_RAW_INPUT_HEIGHT} ${TEST_FRAMES} \
- "${YUV_RAW_INPUT}" vp9_lossless.ivf --lossless=1
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_lossless.ivf"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp9 \
+ --limit="${TEST_FRAMES}" \
+ --ivf \
+ --output="${output}" \
+ --lossless=1
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
+ fi
+}
+
+vpxenc_vp9_ivf_minq0_maxq0() {
+ if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_lossless_minq0_maxq0.ivf"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp9 \
+ --limit="${TEST_FRAMES}" \
+ --ivf \
+ --output="${output}" \
+ --min-q=0 \
+ --max-q=0
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
+ fi
+}
+
+vpxenc_vp9_webm_lag10_frames20() {
+ if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly lag_total_frames=20
+ local readonly lag_frames=10
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_lag10_frames20.webm"
+ vpxenc $(yuv_input_hantro_collage) \
+ --codec=vp9 \
+ --limit="${lag_total_frames}" \
+ --lag-in-frames="${lag_frames}" \
+ --output="${output}" \
+ --passes=2 \
+ --auto-alt-ref=1
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
+ fi
+}
+
+# TODO(fgalligan): Test that DisplayWidth is different than video width.
+vpxenc_vp9_webm_non_square_par() {
+ if [ "$(vpxenc_can_encode_vp9)" = "yes" ] && \
+ [ "$(webm_io_available)" = "yes" ]; then
+ local readonly output="${VPX_TEST_OUTPUT_DIR}/vp9_non_square_par.webm"
+ vpxenc $(y4m_input_non_square_par) \
+ --codec=vp9 \
+ --limit="${TEST_FRAMES}" \
+ --output="${output}"
+
+ if [ ! -e "${output}" ]; then
+ elog "Output file does not exist."
+ return 1
+ fi
fi
}
vpxenc_tests="vpxenc_vp8_ivf
vpxenc_vp8_webm
- vpxenc_vp8_ivf_pipe_input
+ vpxenc_vp8_webm_rt
+ vpxenc_vp8_webm_2pass
+ vpxenc_vp8_webm_lag10_frames20
+ vpxenc_vp8_ivf_piped_input
vpxenc_vp9_ivf
vpxenc_vp9_webm
- vpxenc_vp9_ivf_lossless"
+ vpxenc_vp9_webm_rt
+ vpxenc_vp9_webm_rt_multithread_tiled
+ vpxenc_vp9_webm_2pass
+ vpxenc_vp9_ivf_lossless
+ vpxenc_vp9_ivf_minq0_maxq0
+ vpxenc_vp9_webm_lag10_frames20
+ vpxenc_vp9_webm_non_square_par"
run_tests vpxenc_verify_environment "${vpxenc_tests}"
projects / libvpx / blobdiff