-/*
- * Simple program to rotate Apache logs without having to kill the server.
+/* Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
*
- * Contributed by Ben Laurie <ben@algroup.co.uk>
+ * http://www.apache.org/licenses/LICENSE-2.0
*
- * 12 Mar 1996
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
*/
+#include "apr.h"
+#include "apr_lib.h"
+#include "apr_strings.h"
+#include "apr_errno.h"
+#include "apr_file_io.h"
+#include "apr_file_info.h"
+#include "apr_general.h"
+#include "apr_time.h"
+#include "apr_getopt.h"
+#include "apr_thread_proc.h"
+#include "apr_signal.h"
+#if APR_FILES_AS_SOCKETS
+#include "apr_poll.h"
+#endif
-#define BUFSIZE 65536
-#ifdef MAX_PATH
-#undef MAX_PATH
+#if APR_HAVE_STDLIB_H
+#include <stdlib.h>
#endif
-#define MAX_PATH 1024
+#define APR_WANT_STRFUNC
+#include "apr_want.h"
-#include "ap_config.h"
-#include <time.h>
-#include <errno.h>
-#include <fcntl.h>
+#define BUFSIZE 65536
-void main (int argc, char **argv)
-{
- char buf[BUFSIZE], buf2[MAX_PATH];
- time_t tLogEnd = 0;
- time_t tRotation;
- int nLogFD = -1;
- int nRead;
+#define ROTATE_NONE 0
+#define ROTATE_NEW 1
+#define ROTATE_TIME 2
+#define ROTATE_SIZE 3
+#define ROTATE_FORCE 4
+
+static const char *const ROTATE_REASONS[] = {
+ "None",
+ "Open a new file",
+ "Time interval expired",
+ "Maximum size reached",
+ "Forced rotation",
+ NULL
+};
+
+typedef struct rotate_config rotate_config_t;
+
+struct rotate_config {
+ unsigned int sRotation;
+ int tRotation;
+ int utc_offset;
+ int use_localtime;
+ int use_strftime;
+ int force_open;
+ int verbose;
+ int echo;
char *szLogRoot;
+ int truncate;
+ const char *linkfile;
+ const char *postrotate_prog;
+#if APR_FILES_AS_SOCKETS
+ int create_empty;
+#endif
+ int num_files;
+ int create_path;
+};
+
+typedef struct rotate_status rotate_status_t;
+
+/* "adjusted_time_t" is used to store Unix time (seconds since epoch)
+ * which has been adjusted for some timezone fudge factor. It should
+ * be used for storing the return values from get_now(). A typedef is
+ * used since this type is similar to time_t, but different. */
+typedef long adjusted_time_t;
+
+/* Structure to contain relevant logfile state: fd, pool and
+ * filename. */
+struct logfile {
+ apr_pool_t *pool;
+ apr_file_t *fd;
+ char name[APR_PATH_MAX];
+};
- if (argc != 3) {
- fprintf(stderr,
- "%s <logfile> <rotation time in seconds>\n\n",
- argv[0]);
+struct rotate_status {
+ struct logfile current; /* current logfile. */
+ apr_pool_t *pool; /* top-level pool */
+ int rotateReason;
+ adjusted_time_t tLogEnd;
+ int nMessCount;
+ int fileNum;
+};
+
+static rotate_config_t config;
+static rotate_status_t status;
+
+static void usage(const char *argv0, const char *reason)
+{
+ if (reason) {
+ fprintf(stderr, "%s\n", reason);
+ }
+ fprintf(stderr,
+#if APR_FILES_AS_SOCKETS
+ "Usage: %s [-v] [-l] [-L linkname] [-p prog] [-f] [-D] [-t] [-e] [-c] [-n number] <logfile> "
+#else
+ "Usage: %s [-v] [-l] [-L linkname] [-p prog] [-f] [-D] [-t] [-e] [-n number] <logfile> "
+#endif
+ "{<rotation time in seconds>|<rotation size>(B|K|M|G)} "
+ "[offset minutes from UTC]\n\n",
+ argv0);
#ifdef OS2
- fprintf(stderr,
- "Add this:\n\nTransferLog \"|%s.exe /some/where 86400\"\n\n",
- argv[0]);
+ fprintf(stderr,
+ "Add this:\n\nTransferLog \"|%s.exe /some/where 86400\"\n\n",
+ argv0);
#else
- fprintf(stderr,
- "Add this:\n\nTransferLog \"|%s /some/where 86400\"\n\n",
- argv[0]);
+ fprintf(stderr,
+ "Add this:\n\nTransferLog \"|%s /some/where 86400\"\n\n",
+ argv0);
+ fprintf(stderr,
+ "or \n\nTransferLog \"|%s /some/where 5M\"\n\n", argv0);
+#endif
+ fprintf(stderr,
+ "to httpd.conf. By default, the generated name will be\n"
+ "<logfile>.nnnn where nnnn is the system time at which the log\n"
+ "nominally starts (N.B. if using a rotation time, the time will\n"
+ "always be a multiple of the rotation time, so you can synchronize\n"
+ "cron scripts with it). If <logfile> contains strftime conversion\n"
+ "specifications, those will be used instead. At the end of each\n"
+ "rotation time or when the file size is reached a new log is\n"
+ "started.\n"
+ "\n"
+ "Options:\n"
+ " -v Verbose operation. Messages are written to stderr.\n"
+ " -l Base rotation on local time instead of UTC.\n"
+ " -L path Create hard link from current log to specified path.\n"
+ " -p prog Run specified program after opening a new log file. See below.\n"
+ " -f Force opening of log on program start.\n"
+ " -D Create parent directories of log file.\n"
+ " -t Truncate logfile instead of rotating, tail friendly.\n"
+ " -e Echo log to stdout for further processing.\n"
+#if APR_FILES_AS_SOCKETS
+ " -c Create log even if it is empty.\n"
#endif
- fprintf(stderr,
- "to httpd.conf. The generated name will be /some/where.nnnn "
- "where nnnn is the\nsystem time at which the log nominally "
- "starts (N.B. this time will always be a\nmultiple of the "
- "rotation time, so you can synchronize cron scripts with it).\n"
- "At the end of each rotation time a new log is started.\n");
- exit(1);
+ " -n num Rotate file by adding suffixes '.0', '.1', ..., '.(num-1)'.\n"
+ "\n"
+ "The program for '-p' is invoked as \"[prog] <curfile> [<prevfile>]\"\n"
+ "where <curfile> is the filename of the newly opened logfile, and\n"
+ "<prevfile>, if given, is the filename of the previously used logfile.\n"
+ "\n");
+ exit(1);
+}
+
+/* This function returns the current Unix time (time_t) adjusted for
+ * any configured or derived local time offset. The offset applied is
+ * returned via *offset. */
+static adjusted_time_t get_now(rotate_config_t *config, apr_int32_t *offset)
+{
+ apr_time_t tNow = apr_time_now();
+ apr_int32_t utc_offset;
+
+ if (config->use_localtime) {
+ /* Check for our UTC offset before using it, since it might
+ * change if there's a switch between standard and daylight
+ * savings time.
+ */
+ apr_time_exp_t lt;
+ apr_time_exp_lt(<, tNow);
+ utc_offset = lt.tm_gmtoff;
+ }
+ else {
+ utc_offset = config->utc_offset;
}
- szLogRoot = argv[1];
- tRotation = atoi(argv[2]);
- if (tRotation <= 0) {
- fprintf(stderr, "Rotation time must be > 0\n");
- exit(6);
+ if (offset)
+ *offset = utc_offset;
+
+ return apr_time_sec(tNow) + utc_offset;
+}
+
+/*
+ * Close a file and destroy the associated pool.
+ */
+static void close_logfile(rotate_config_t *config, struct logfile *logfile)
+{
+ if (config->verbose) {
+ fprintf(stderr, "Closing file %s\n", logfile->name);
+ }
+ apr_file_close(logfile->fd);
+ apr_pool_destroy(logfile->pool);
+}
+
+/*
+ * Dump the configuration parsing result to STDERR.
+ */
+static void dumpConfig (rotate_config_t *config)
+{
+ fprintf(stderr, "Rotation time interval: %12d\n", config->tRotation);
+ fprintf(stderr, "Rotation size interval: %12d\n", config->sRotation);
+ fprintf(stderr, "Rotation time UTC offset: %12d\n", config->utc_offset);
+ fprintf(stderr, "Rotation based on localtime: %12s\n", config->use_localtime ? "yes" : "no");
+ fprintf(stderr, "Rotation file date pattern: %12s\n", config->use_strftime ? "yes" : "no");
+ fprintf(stderr, "Rotation file forced open: %12s\n", config->force_open ? "yes" : "no");
+ fprintf(stderr, "Create parent directories: %12s\n", config->create_path ? "yes" : "no");
+ fprintf(stderr, "Rotation verbose: %12s\n", config->verbose ? "yes" : "no");
+#if APR_FILES_AS_SOCKETS
+ fprintf(stderr, "Rotation create empty logs: %12s\n", config->create_empty ? "yes" : "no");
+#endif
+ fprintf(stderr, "Rotation file name: %21s\n", config->szLogRoot);
+ fprintf(stderr, "Post-rotation prog: %21s\n", config->postrotate_prog ? config->postrotate_prog : "not used");
+}
+
+/*
+ * Check whether we need to rotate.
+ * Possible reasons are:
+ * - No log file open (ROTATE_NEW)
+ * - User forces us to rotate (ROTATE_FORCE)
+ * - Our log file size is already bigger than the
+ * allowed maximum (ROTATE_SIZE)
+ * - The next log time interval expired (ROTATE_TIME)
+ *
+ * When size and time constraints are both given,
+ * it suffices that one of them is fulfilled.
+ */
+static void checkRotate(rotate_config_t *config, rotate_status_t *status)
+{
+ if (status->current.fd == NULL) {
+ status->rotateReason = ROTATE_NEW;
+ }
+ else if (config->sRotation) {
+ apr_finfo_t finfo;
+ apr_off_t current_size = -1;
+
+ if (apr_file_info_get(&finfo, APR_FINFO_SIZE, status->current.fd) == APR_SUCCESS) {
+ current_size = finfo.size;
+ }
+
+ if (current_size > config->sRotation) {
+ status->rotateReason = ROTATE_SIZE;
+ }
+ else if (config->tRotation) {
+ if (get_now(config, NULL) >= status->tLogEnd) {
+ status->rotateReason = ROTATE_TIME;
+ }
+ }
+ }
+ else if (config->tRotation) {
+ if (get_now(config, NULL) >= status->tLogEnd) {
+ status->rotateReason = ROTATE_TIME;
+ }
+ }
+ else {
+ fprintf(stderr, "No rotation time or size specified\n");
+ exit(2);
+ }
+
+ if (status->rotateReason != ROTATE_NONE && config->verbose) {
+ fprintf(stderr, "File rotation needed, reason: %s\n", ROTATE_REASONS[status->rotateReason]);
+ }
+}
+
+/*
+ * Handle post-rotate processing.
+ */
+static void post_rotate(apr_pool_t *pool, struct logfile *newlog,
+ rotate_config_t *config, rotate_status_t *status)
+{
+ apr_status_t rv;
+ apr_procattr_t *pattr;
+ const char *argv[4];
+ apr_proc_t proc;
+
+ /* Handle link file, if configured. */
+ if (config->linkfile) {
+ apr_file_remove(config->linkfile, newlog->pool);
+ if (config->verbose) {
+ fprintf(stderr, "Linking %s to %s\n", newlog->name, config->linkfile);
+ }
+ rv = apr_file_link(newlog->name, config->linkfile);
+ if (rv != APR_SUCCESS) {
+ char *error = apr_psprintf(pool, "Error linking file %s to %s (%pm)\n",
+ newlog->name, config->linkfile, &rv);
+ fputs(error, stderr);
+ exit(2);
+ }
+ }
+
+ if (!config->postrotate_prog) {
+ /* Nothing more to do. */
+ return;
+ }
+
+ /* Collect any zombies from a previous run, but don't wait. */
+ while (apr_proc_wait_all_procs(&proc, NULL, NULL, APR_NOWAIT, pool) == APR_CHILD_DONE)
+ /* noop */;
+
+ if ((rv = apr_procattr_create(&pattr, pool)) != APR_SUCCESS) {
+ char *error = apr_psprintf(pool, "post_rotate: apr_procattr_create failed " \
+ "for '%s': %pm\n", config->postrotate_prog, &rv);
+ fputs(error, stderr);
+ return;
+ }
+
+ rv = apr_procattr_error_check_set(pattr, 1);
+ if (rv == APR_SUCCESS)
+ rv = apr_procattr_cmdtype_set(pattr, APR_PROGRAM_ENV);
+
+ if (rv != APR_SUCCESS) {
+ char *error = apr_psprintf(pool, "post_rotate: could not set up process " \
+ "attributes for '%s': %pm\n", config->postrotate_prog,
+ &rv);
+ fputs(error, stderr);
+ return;
+ }
+
+ argv[0] = config->postrotate_prog;
+ argv[1] = newlog->name;
+ if (status->current.fd) {
+ argv[2] = status->current.name;
+ argv[3] = NULL;
+ }
+ else {
+ argv[2] = NULL;
+ }
+
+ if (config->verbose)
+ fprintf(stderr, "Calling post-rotate program: %s\n", argv[0]);
+
+ rv = apr_proc_create(&proc, argv[0], argv, NULL, pattr, pool);
+ if (rv != APR_SUCCESS) {
+ char *error = apr_psprintf(pool, "Could not spawn post-rotate process " \
+ "'%s': %pm\n", config->postrotate_prog, &rv);
+ fputs(error, stderr);
+ return;
+ }
+}
+
+/* After a error, truncate the current file and write out an error
+ * message, which must be contained in message. The process is
+ * terminated on failure. */
+static void truncate_and_write_error(rotate_status_t *status, const char *message)
+{
+ apr_size_t buflen = strlen(message);
+
+ if (apr_file_trunc(status->current.fd, 0) != APR_SUCCESS) {
+ fprintf(stderr, "Error truncating the file %s\n", status->current.name);
+ exit(2);
+ }
+ if (apr_file_write_full(status->current.fd, message, buflen, NULL) != APR_SUCCESS) {
+ fprintf(stderr, "Error writing error (%s) to the file %s\n",
+ message, status->current.name);
+ exit(2);
+ }
+}
+
+/*
+ * Open a new log file, and if successful
+ * also close the old one.
+ *
+ * The timestamp for the calculation of the file
+ * name of the new log file will be the actual millisecond
+ * timestamp, except when a regular rotation based on a time
+ * interval is configured and the previous interval
+ * is over. Then the timestamp is the starting time
+ * of the actual interval.
+ */
+static void doRotate(rotate_config_t *config, rotate_status_t *status)
+{
+ apr_int32_t offset;
+ adjusted_time_t now, tLogStart;
+ apr_status_t rv;
+ struct logfile newlog;
+ int thisLogNum = -1;
+
+ /* Retrieve local-time-adjusted-Unix-time. */
+ now = get_now(config, &offset);
+
+ status->rotateReason = ROTATE_NONE;
+
+ if (config->tRotation) {
+ adjusted_time_t tLogEnd;
+
+ tLogStart = (now / config->tRotation) * config->tRotation;
+ tLogEnd = tLogStart + config->tRotation;
+ /*
+ * Check if rotation was forced and the last rotation
+ * interval is not yet over. Use the value of now instead
+ * of the time interval boundary for the file name then.
+ */
+ if (tLogStart < status->tLogEnd) {
+ tLogStart = now;
+ }
+ status->tLogEnd = tLogEnd;
+ }
+ else {
+ tLogStart = now;
+ }
+
+ if (config->use_strftime) {
+ apr_time_t tNow = apr_time_from_sec(tLogStart);
+ apr_time_exp_t e;
+ apr_size_t rs;
+
+ /* Explode the local-time-adjusted-Unix-time into a struct tm,
+ * first *reversing* local-time-adjustment applied by
+ * get_now() if we are using localtime. */
+ if (config->use_localtime)
+ apr_time_exp_lt(&e, tNow - apr_time_from_sec(offset));
+ else
+ apr_time_exp_gmt(&e, tNow);
+ apr_strftime(newlog.name, &rs, sizeof(newlog.name), config->szLogRoot, &e);
+ }
+ else {
+ if (config->truncate) {
+ apr_snprintf(newlog.name, sizeof(newlog.name), "%s", config->szLogRoot);
+ }
+ else if (config->num_files > 0) {
+ if (status->fileNum == -1 || status->fileNum == (config->num_files - 1)) {
+ thisLogNum = 0;
+ apr_snprintf(newlog.name, sizeof(newlog.name), "%s", config->szLogRoot);
+ }
+ else {
+ thisLogNum = status->fileNum + 1;
+ apr_snprintf(newlog.name, sizeof(newlog.name), "%s.%d", config->szLogRoot, thisLogNum);
+ }
+ }
+ else {
+ apr_snprintf(newlog.name, sizeof(newlog.name), "%s.%010ld", config->szLogRoot,
+ tLogStart);
+ }
+ }
+ apr_pool_create(&newlog.pool, status->pool);
+ if (config->create_path) {
+ char *ptr = strrchr(newlog.name, '/');
+ if (ptr && ptr > newlog.name) {
+ char *path = apr_pstrmemdup(newlog.pool, newlog.name, ptr - newlog.name);
+ if (config->verbose) {
+ fprintf(stderr, "Creating directory tree %s\n", path);
+ }
+ rv = apr_dir_make_recursive(path, APR_FPROT_OS_DEFAULT, newlog.pool);
+ if (rv != APR_SUCCESS) {
+ char *error = apr_psprintf(newlog.pool,
+ "Could not create directory '%s' (%pm)\n",
+ path, &rv);
+ fputs(error, stderr);
+ exit(2);
+ }
+ }
+ }
+ if (config->verbose) {
+ fprintf(stderr, "Opening file %s\n", newlog.name);
+ }
+ rv = apr_file_open(&newlog.fd, newlog.name, APR_WRITE | APR_CREATE | APR_APPEND
+ | (config->truncate || (config->num_files > 0 && status->current.fd) ? APR_TRUNCATE : 0),
+ APR_OS_DEFAULT, newlog.pool);
+ if (rv == APR_SUCCESS) {
+ /* Handle post-rotate processing. */
+ post_rotate(newlog.pool, &newlog, config, status);
+
+ status->fileNum = thisLogNum;
+ /* Close out old (previously 'current') logfile, if any. */
+ if (status->current.fd) {
+ close_logfile(config, &status->current);
+ }
+
+ /* New log file is now 'current'. */
+ status->current = newlog;
+ }
+ else {
+ char *error = apr_psprintf(newlog.pool, "%pm", &rv);
+ char *message;
+
+ /* Uh-oh. Failed to open the new log file. Try to clear
+ * the previous log file, note the lost log entries,
+ * and keep on truckin'. */
+ if (status->current.fd == NULL) {
+ fprintf(stderr, "Could not open log file '%s' (%s)\n", newlog.name, error);
+ exit(2);
+ }
+
+ /* Try to keep this error message constant length
+ * in case it occurs several times. */
+ message = apr_psprintf(newlog.pool,
+ "Resetting log file due to error opening "
+ "new log file, %10d messages lost: %-25.25s\n",
+ status->nMessCount, error);
+
+ truncate_and_write_error(status, message);
+
+ /* Throw away new state; it isn't going to be used. */
+ apr_pool_destroy(newlog.pool);
+ }
+
+ status->nMessCount = 0;
+}
+
+/*
+ * Get a size or time param from a string.
+ * Parameter 'last' indicates, whether the
+ * argument is the last commadnline argument.
+ * UTC offset is only allowed as a last argument
+ * in order to make is distinguishable from the
+ * rotation interval time.
+ */
+static const char *get_time_or_size(rotate_config_t *config,
+ const char *arg, int last) {
+ char *ptr = NULL;
+ /* Byte multiplier */
+ unsigned int mult = 1;
+ if ((ptr = strchr(arg, 'B')) != NULL) { /* Found KB size */
+ mult = 1;
+ }
+ else if ((ptr = strchr(arg, 'K')) != NULL) { /* Found KB size */
+ mult = 1024;
+ }
+ else if ((ptr = strchr(arg, 'M')) != NULL) { /* Found MB size */
+ mult = 1024 * 1024;
+ }
+ else if ((ptr = strchr(arg, 'G')) != NULL) { /* Found GB size */
+ mult = 1024 * 1024 * 1024;
+ }
+ if (ptr) { /* rotation based on file size */
+ if (config->sRotation > 0) {
+ return "Rotation size parameter allowed only once";
+ }
+ if (*(ptr+1) == '\0') {
+ config->sRotation = atoi(arg) * mult;
+ }
+ if (config->sRotation == 0) {
+ return "Invalid rotation size parameter";
+ }
+ }
+ else if ((config->sRotation > 0 || config->tRotation > 0) && last) {
+ /* rotation based on elapsed time */
+ if (config->use_localtime) {
+ return "UTC offset parameter is not valid with -l";
+ }
+ config->utc_offset = atoi(arg) * 60;
+ }
+ else { /* rotation based on elapsed time */
+ if (config->tRotation > 0) {
+ return "Rotation time parameter allowed only once";
+ }
+ config->tRotation = atoi(arg);
+ if (config->tRotation <= 0) {
+ return "Invalid rotation time parameter";
+ }
+ }
+ return NULL;
+}
+
+int main (int argc, const char * const argv[])
+{
+ char buf[BUFSIZE];
+ apr_size_t nRead, nWrite;
+ apr_file_t *f_stdin;
+ apr_file_t *f_stdout;
+ apr_getopt_t *opt;
+ apr_status_t rv;
+ char c;
+ const char *opt_arg;
+ const char *err = NULL;
+#if APR_FILES_AS_SOCKETS
+ apr_pollfd_t pollfd = { 0 };
+ apr_status_t pollret = APR_SUCCESS;
+ long polltimeout;
+#endif
+
+ apr_app_initialize(&argc, &argv, NULL);
+ atexit(apr_terminate);
+
+ memset(&config, 0, sizeof config);
+ memset(&status, 0, sizeof status);
+ status.rotateReason = ROTATE_NONE;
+
+ apr_pool_create(&status.pool, NULL);
+ apr_getopt_init(&opt, status.pool, argc, argv);
+#if APR_FILES_AS_SOCKETS
+ while ((rv = apr_getopt(opt, "lL:p:fDtvecn:", &c, &opt_arg)) == APR_SUCCESS) {
+#else
+ while ((rv = apr_getopt(opt, "lL:p:fDtven:", &c, &opt_arg)) == APR_SUCCESS) {
+#endif
+ switch (c) {
+ case 'l':
+ config.use_localtime = 1;
+ break;
+ case 'L':
+ config.linkfile = opt_arg;
+ break;
+ case 'p':
+ config.postrotate_prog = opt_arg;
+#ifdef SIGCHLD
+ /* Prevent creation of zombies (on modern Unix systems). */
+ apr_signal(SIGCHLD, SIG_IGN);
+#endif
+ break;
+ case 'f':
+ config.force_open = 1;
+ break;
+ case 'D':
+ config.create_path = 1;
+ break;
+ case 't':
+ config.truncate = 1;
+ break;
+ case 'v':
+ config.verbose = 1;
+ break;
+ case 'e':
+ config.echo = 1;
+ break;
+#if APR_FILES_AS_SOCKETS
+ case 'c':
+ config.create_empty = 1;
+ break;
+#endif
+ case 'n':
+ config.num_files = atoi(opt_arg);
+ status.fileNum = -1;
+ break;
+ }
+ }
+
+ if (rv != APR_EOF) {
+ usage(argv[0], NULL /* specific error message already issued */ );
+ }
+
+ /*
+ * After the initial flags we need 2 to 4 arguments,
+ * the file name, either the rotation interval time or size
+ * or both of them, and optionally the UTC offset.
+ */
+ if ((argc - opt->ind < 2) || (argc - opt->ind > 4) ) {
+ usage(argv[0], "Incorrect number of arguments");
+ }
+
+ rv = apr_filepath_merge(&config.szLogRoot, "", argv[opt->ind++],
+ APR_FILEPATH_TRUENAME, status.pool);
+ if (rv != APR_SUCCESS && rv != APR_EPATHWILD) {
+ usage(argv[0], "Invalid filename given");
+ }
+
+ /* Read in the remaining flags, namely time, size and UTC offset. */
+ for(; opt->ind < argc; opt->ind++) {
+ if ((err = get_time_or_size(&config, argv[opt->ind],
+ opt->ind < argc - 1 ? 0 : 1)) != NULL) {
+ usage(argv[0], err);
+ }
+ }
+
+ config.use_strftime = (strchr(config.szLogRoot, '%') != NULL);
+
+ if (config.use_strftime && config.num_files > 0) {
+ fprintf(stderr, "Cannot use -n with %% in filename\n");
+ exit(1);
+ }
+
+ if (status.fileNum == -1 && config.num_files < 1) {
+ fprintf(stderr, "Invalid -n argument\n");
+ exit(1);
+ }
+
+ if (apr_file_open_stdin(&f_stdin, status.pool) != APR_SUCCESS) {
+ fprintf(stderr, "Unable to open stdin\n");
+ exit(1);
+ }
+
+ if (apr_file_open_stdout(&f_stdout, status.pool) != APR_SUCCESS) {
+ fprintf(stderr, "Unable to open stdout\n");
+ exit(1);
+ }
+
+ /*
+ * Write out result of config parsing if verbose is set.
+ */
+ if (config.verbose) {
+ dumpConfig(&config);
+ }
+
+#if APR_FILES_AS_SOCKETS
+ if (config.create_empty && config.tRotation) {
+ pollfd.p = status.pool;
+ pollfd.desc_type = APR_POLL_FILE;
+ pollfd.reqevents = APR_POLLIN;
+ pollfd.desc.f = f_stdin;
+ }
+#endif
+
+ /*
+ * Immediately open the logfile as we start, if we were forced
+ * to do so via '-f'.
+ */
+ if (config.force_open) {
+ doRotate(&config, &status);
}
for (;;) {
- nRead = read(0, buf, sizeof buf);
- if (nRead == 0)
- exit(3);
- if (nRead < 0)
- if (errno != EINTR)
- exit(4);
- if (nLogFD >= 0 && (time(NULL) >= tLogEnd || nRead < 0)) {
- close(nLogFD);
- nLogFD = -1;
- }
- if (nLogFD < 0) {
- time_t tLogStart = (time(NULL) / tRotation) * tRotation;
- sprintf(buf2, "%s.%010d", szLogRoot, (int) tLogStart);
- tLogEnd = tLogStart + tRotation;
- nLogFD = open(buf2, O_WRONLY | O_CREAT | O_APPEND, 0666);
- if (nLogFD < 0) {
- perror(buf2);
- exit(2);
- }
- }
- if (write(nLogFD, buf, nRead) != nRead) {
- perror(buf2);
- exit(5);
- }
+ nRead = sizeof(buf);
+#if APR_FILES_AS_SOCKETS
+ if (config.create_empty && config.tRotation) {
+ polltimeout = status.tLogEnd ? status.tLogEnd - get_now(&config, NULL) : config.tRotation;
+ if (polltimeout <= 0) {
+ pollret = APR_TIMEUP;
+ }
+ else {
+ pollret = apr_poll(&pollfd, 1, &pollret, apr_time_from_sec(polltimeout));
+ }
+ }
+ if (pollret == APR_SUCCESS) {
+ rv = apr_file_read(f_stdin, buf, &nRead);
+ if (APR_STATUS_IS_EOF(rv)) {
+ break;
+ }
+ else if (rv != APR_SUCCESS) {
+ exit(3);
+ }
+ }
+ else if (pollret == APR_TIMEUP) {
+ *buf = 0;
+ nRead = 0;
+ }
+ else {
+ fprintf(stderr, "Unable to poll stdin\n");
+ exit(5);
+ }
+#else /* APR_FILES_AS_SOCKETS */
+ rv = apr_file_read(f_stdin, buf, &nRead);
+ if (APR_STATUS_IS_EOF(rv)) {
+ break;
+ }
+ else if (rv != APR_SUCCESS) {
+ exit(3);
+ }
+#endif /* APR_FILES_AS_SOCKETS */
+ checkRotate(&config, &status);
+ if (status.rotateReason != ROTATE_NONE) {
+ doRotate(&config, &status);
+ }
+
+ nWrite = nRead;
+ rv = apr_file_write_full(status.current.fd, buf, nWrite, &nWrite);
+ if (nWrite != nRead) {
+ apr_off_t cur_offset;
+ apr_pool_t *pool;
+ char *error;
+
+ cur_offset = 0;
+ if (apr_file_seek(status.current.fd, APR_CUR, &cur_offset) != APR_SUCCESS) {
+ cur_offset = -1;
+ }
+ status.nMessCount++;
+ apr_pool_create(&pool, status.pool);
+ error = apr_psprintf(pool, "Error %d writing to log file at offset %"
+ APR_OFF_T_FMT ". %10d messages lost (%pm)\n",
+ rv, cur_offset, status.nMessCount, &rv);
+
+ truncate_and_write_error(&status, error);
+ apr_pool_destroy(pool);
+ }
+ else {
+ status.nMessCount++;
+ }
+ if (config.echo) {
+ if (apr_file_write_full(f_stdout, buf, nRead, NULL)) {
+ fprintf(stderr, "Unable to write to stdout\n");
+ exit(4);
+ }
+ }
}
+
+ return 0; /* reached only at stdin EOF. */
}
projects / apache / blobdiff