-/* ====================================================================
- * The Apache Software License, Version 1.1
+/* Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
*
- * Copyright (c) 2000-2002 The Apache Software Foundation. All rights
- * reserved.
+ * http://www.apache.org/licenses/LICENSE-2.0
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * 3. The end-user documentation included with the redistribution,
- * if any, must include the following acknowledgment:
- * "This product includes software developed by the
- * Apache Software Foundation (http://www.apache.org/)."
- * Alternately, this acknowledgment may appear in the software itself,
- * if and wherever such third-party acknowledgments normally appear.
- *
- * 4. The names "Apache" and "Apache Software Foundation" must
- * not be used to endorse or promote products derived from this
- * software without prior written permission. For written
- * permission, please contact apache@apache.org.
- *
- * 5. Products derived from this software may not be called "Apache",
- * nor may "Apache" appear in their name, without prior written
- * permission of the Apache Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * ====================================================================
- *
- * This software consists of voluntary contributions made by many
- * individuals on behalf of the Apache Software Foundation. For more
- * information on the Apache Software Foundation, please see
- * <http://www.apache.org/>.
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
*/
/*
* Simple program to rotate Apache logs without having to kill the server.
*
- * Contributed by Ben Laurie <ben@algroup.co.uk>
+ * Contributed by Ben Laurie <ben algroup.co.uk>
*
* 12 Mar 1996
*
- * Ported to APR by Mladen Turk <mturk@mappingsoft.com>
+ * Ported to APR by Mladen Turk <mturk mappingsoft.com>
*
* 23 Sep 2001
+ *
+ * -l option added 2004-06-11
+ *
+ * -l causes the use of local time rather than GMT as the base for the
+ * interval. NB: Using -l in an environment which changes the GMT offset
+ * (such as for BST or DST) can lead to unpredictable results!
+ *
+ * -f option added Feb, 2008. This causes rotatelog to open/create
+ * the logfile as soon as it's started, not as soon as it sees
+ * data.
+ *
+ * -v option added Feb, 2008. Verbose output of command line parsing.
*/
#include "apr_file_info.h"
#include "apr_general.h"
#include "apr_time.h"
+#include "apr_getopt.h"
#if APR_HAVE_STDLIB_H
#include <stdlib.h>
#endif
-#if APR_HAVE_STRING_H
-#include <string.h>
-#endif
-#if APR_HAVE_STRINGS_H
-#include <strings.h>
-#endif
+#define APR_WANT_STRFUNC
+#include "apr_want.h"
#define BUFSIZE 65536
-#define ERRMSGSZ 82
+#define ERRMSGSZ 256
#ifndef MAX_PATH
#define MAX_PATH 1024
#endif
-int main (int argc, const char * const argv[])
-{
- char buf[BUFSIZE], buf2[MAX_PATH], errbuf[ERRMSGSZ];
- int tLogEnd = 0, tRotation = 0, utc_offset = 0;
- unsigned int sRotation = 0;
- int nMessCount = 0;
- apr_size_t nRead, nWrite;
- int use_strftime = 0;
- int now = 0;
+#define ROTATE_NONE 0
+#define ROTATE_NEW 1
+#define ROTATE_TIME 2
+#define ROTATE_SIZE 3
+#define ROTATE_FORCE 4
+
+static const char *ROTATE_REASONS[] = {
+ "None",
+ "Open a new file",
+ "Time interval expired",
+ "Maximum size reached",
+ "Forced rotation",
+ NULL
+};
+
+typedef struct rotate_config rotate_config_t;
+
+struct rotate_config {
+ unsigned int sRotation;
+ int tRotation;
+ int utc_offset;
+ int use_localtime;
+ int use_strftime;
+ int force_open;
+ int verbose;
const char *szLogRoot;
- apr_file_t *f_stdin, *nLogFD = NULL, *nLogFDprev = NULL;
+ int truncate;
+ const char *linkfile;
+};
+
+typedef struct rotate_status rotate_status_t;
+
+struct rotate_status {
apr_pool_t *pool;
- char *ptr = NULL;
+ apr_pool_t *pfile;
+ apr_pool_t *pfile_prev;
+ apr_file_t *nLogFD;
+ apr_file_t *nLogFDprev;
+ char filename[MAX_PATH];
+ char errbuf[ERRMSGSZ];
+ int rotateReason;
+ int tLogEnd;
+ int nMessCount;
+};
- apr_app_initialize(&argc, &argv, NULL);
- atexit(apr_terminate);
+static rotate_config_t config;
+static rotate_status_t status;
- apr_pool_create(&pool, NULL);
- if (argc < 3 || argc > 4) {
- fprintf(stderr,
- "Usage: %s <logfile> <rotation time in seconds> "
- "[offset minutes from UTC] or <rotation size in megabytes>\n\n",
- argv[0]);
+static void usage(const char *argv0, const char *reason)
+{
+ if (reason) {
+ fprintf(stderr, "%s\n", reason);
+ }
+ fprintf(stderr,
+ "Usage: %s [-v] [-l] [-L linkname] [-f] [-t] <logfile> "
+ "{<rotation time in seconds>|<rotation size>(B|K|M|G)} "
+ "[offset minutes from UTC]\n\n",
+ argv0);
#ifdef OS2
- fprintf(stderr,
- "Add this:\n\nTransferLog \"|%s.exe /some/where 86400\"\n\n",
- argv[0]);
+ fprintf(stderr,
+ "Add this:\n\nTransferLog \"|%s.exe /some/where 86400\"\n\n",
+ argv0);
#else
- fprintf(stderr,
- "Add this:\n\nTransferLog \"|%s /some/where 86400\"\n\n",
- argv[0]);
- fprintf(stderr,
- "or \n\nTransferLog \"|%s /some/where 5M\"\n\n", argv[0]);
+ fprintf(stderr,
+ "Add this:\n\nTransferLog \"|%s /some/where 86400\"\n\n",
+ argv0);
+ fprintf(stderr,
+ "or \n\nTransferLog \"|%s /some/where 5M\"\n\n", argv0);
#endif
- fprintf(stderr,
- "to httpd.conf. The generated name will be /some/where.nnnn "
- "where nnnn is the\nsystem time at which the log nominally "
- "starts (N.B. if using a rotation time,\nthe time will always "
- "be a multiple of the rotation time, so you can synchronize\n"
- "cron scripts with it). At the end of each rotation time or "
- "when the file size\nis reached a new log is started.\n");
- exit(1);
+ fprintf(stderr,
+ "to httpd.conf. The generated name will be /some/where.nnnn "
+ "where nnnn is the\nsystem time at which the log nominally "
+ "starts (N.B. if using a rotation time,\nthe time will always "
+ "be a multiple of the rotation time, so you can synchronize\n"
+ "cron scripts with it). At the end of each rotation time or "
+ "when the file size\nis reached a new log is started. If the "
+ "-t option is specified, the specified\nfile will be truncated "
+ "instead of rotated, and is useful where tail is used to\n"
+ "process logs in real time. If the -L option is specified, "
+ "a hard link will be\nmade from the current log file to the "
+ "specified filename.\n");
+ exit(1);
+}
+
+/*
+ * Get the unix time with timezone corrections
+ * given in the config struct.
+ */
+static int get_now(rotate_config_t *config)
+{
+ apr_time_t tNow = apr_time_now();
+ int utc_offset = config->utc_offset;
+ if (config->use_localtime) {
+ /* Check for our UTC offset before using it, since it might
+ * change if there's a switch between standard and daylight
+ * savings time.
+ */
+ apr_time_exp_t lt;
+ apr_time_exp_lt(<, tNow);
+ utc_offset = lt.tm_gmtoff;
}
+ return (int)apr_time_sec(tNow) + utc_offset;
+}
- szLogRoot = argv[1];
+/*
+ * Close a file and destroy the associated pool.
+ */
+static void closeFile(rotate_config_t *config, apr_pool_t *pool, apr_file_t *file)
+{
+ if (file != NULL) {
+ if (config->verbose) {
+ apr_finfo_t finfo;
+ apr_int32_t wanted = APR_FINFO_NAME;
+ apr_status_t rv = apr_file_info_get(&finfo, wanted, file);
+ if ((rv == APR_SUCCESS) || (rv == APR_INCOMPLETE)) {
+ if (finfo.valid & APR_FINFO_NAME) {
+ fprintf(stderr, "Closing file %s (%s)\n", finfo.name, finfo.fname);
+ } else {
+ fprintf(stderr, "Closing file %s\n", finfo.fname);
+ }
+ }
+ }
+ apr_file_close(file);
+ if (pool) {
+ apr_pool_destroy(pool);
+ }
+ }
+}
- ptr = strchr (argv[2], 'M');
- if (ptr) {
- if (*(ptr+1) == '\0') {
- sRotation = atoi(argv[2]) * 1048576;
+/*
+ * Dump the configuration parsing result to STDERR.
+ */
+static void dumpConfig (rotate_config_t *config)
+{
+ fprintf(stderr, "Rotation time interval: %12d\n", config->tRotation);
+ fprintf(stderr, "Rotation size interval: %12d\n", config->sRotation);
+ fprintf(stderr, "Rotation time UTC offset: %12d\n", config->utc_offset);
+ fprintf(stderr, "Rotation based on localtime: %12s\n", config->use_localtime ? "yes" : "no");
+ fprintf(stderr, "Rotation file date pattern: %12s\n", config->use_strftime ? "yes" : "no");
+ fprintf(stderr, "Rotation file forced open: %12s\n", config->force_open ? "yes" : "no");
+ fprintf(stderr, "Rotation verbose: %12s\n", config->verbose ? "yes" : "no");
+ fprintf(stderr, "Rotation file name: %21s\n", config->szLogRoot);
+}
+
+/*
+ * Check whether we need to rotate.
+ * Possible reasons are:
+ * - No log file open (ROTATE_NEW)
+ * - User forces us to rotate (ROTATE_FORCE)
+ * - Our log file size is already bigger than the
+ * allowed maximum (ROTATE_SIZE)
+ * - The next log time interval expired (ROTATE_TIME)
+ *
+ * When size and time constraints are both given,
+ * it suffices that one of them is fulfilled.
+ */
+static void checkRotate(rotate_config_t *config, rotate_status_t *status)
+{
+
+ if (status->nLogFD == NULL) {
+ status->rotateReason = ROTATE_NEW;
+ }
+ else if (config->sRotation) {
+ apr_finfo_t finfo;
+ apr_off_t current_size = -1;
+
+ if (apr_file_info_get(&finfo, APR_FINFO_SIZE, status->nLogFD) == APR_SUCCESS) {
+ current_size = finfo.size;
}
- if (sRotation == 0) {
- fprintf(stderr, "Invalid rotation size parameter\n");
- exit(1);
+
+ if (current_size > config->sRotation) {
+ status->rotateReason = ROTATE_SIZE;
+ }
+ else if (config->tRotation) {
+ if (get_now(config) >= status->tLogEnd) {
+ status->rotateReason = ROTATE_TIME;
+ }
+ }
+ }
+ else if (config->tRotation) {
+ if (get_now(config) >= status->tLogEnd) {
+ status->rotateReason = ROTATE_TIME;
}
}
else {
- if (argc >= 4) {
- utc_offset = atoi(argv[3]) * 60;
+ fprintf(stderr, "No rotation time or size specified\n");
+ exit(2);
+ }
+
+ if (status->rotateReason != ROTATE_NONE && config->verbose) {
+ fprintf(stderr, "File rotation needed, reason: %s\n", ROTATE_REASONS[status->rotateReason]);
+ }
+
+ return;
+}
+
+/*
+ * Open a new log file, and if successful
+ * also close the old one.
+ *
+ * The timestamp for the calculation of the file
+ * name of the new log file will be the actual millisecond
+ * timestamp, except when a regular rotation based on a time
+ * interval is configured and the previous interval
+ * is over. Then the timestamp is the starting time
+ * of the actual interval.
+ */
+static void doRotate(rotate_config_t *config, rotate_status_t *status)
+{
+
+ int now = get_now(config);
+ int tLogStart;
+ apr_status_t rv;
+
+ status->rotateReason = ROTATE_NONE;
+ status->nLogFDprev = status->nLogFD;
+ status->nLogFD = NULL;
+ status->pfile_prev = status->pfile;
+
+ if (config->tRotation) {
+ int tLogEnd;
+ tLogStart = (now / config->tRotation) * config->tRotation;
+ tLogEnd = tLogStart + config->tRotation;
+ /*
+ * Check if rotation was forced and the last rotation
+ * interval is not yet over. Use the value of now instead
+ * of the time interval boundary for the file name then.
+ */
+ if (tLogStart < status->tLogEnd) {
+ tLogStart = now;
}
- tRotation = atoi(argv[2]);
- if (tRotation <= 0) {
- fprintf(stderr, "Rotation time must be > 0\n");
- exit(6);
+ status->tLogEnd = tLogEnd;
+ }
+ else {
+ tLogStart = now;
+ }
+
+ if (config->use_strftime) {
+ apr_time_t tNow = apr_time_from_sec(tLogStart);
+ apr_time_exp_t e;
+ apr_size_t rs;
+
+ apr_time_exp_gmt(&e, tNow);
+ apr_strftime(status->filename, &rs, sizeof(status->filename), config->szLogRoot, &e);
+ }
+ else {
+ if (config->truncate) {
+ apr_snprintf(status->filename, sizeof(status->filename), "%s", config->szLogRoot);
+ }
+ else {
+ apr_snprintf(status->filename, sizeof(status->filename), "%s.%010d", config->szLogRoot,
+ tLogStart);
+ }
+ }
+ apr_pool_create(&status->pfile, status->pool);
+ if (config->verbose) {
+ fprintf(stderr, "Opening file %s\n", status->filename);
+ }
+ rv = apr_file_open(&status->nLogFD, status->filename, APR_WRITE | APR_CREATE | APR_APPEND
+ | (config->truncate ? APR_TRUNCATE : 0), APR_OS_DEFAULT, status->pfile);
+ if (rv != APR_SUCCESS) {
+ char error[120];
+
+ apr_strerror(rv, error, sizeof error);
+
+ /* Uh-oh. Failed to open the new log file. Try to clear
+ * the previous log file, note the lost log entries,
+ * and keep on truckin'. */
+ if (status->nLogFDprev == NULL) {
+ fprintf(stderr, "Could not open log file '%s' (%s)\n", status->filename, error);
+ exit(2);
+ }
+ else {
+ apr_size_t nWrite;
+ status->nLogFD = status->nLogFDprev;
+ apr_pool_destroy(status->pfile);
+ status->pfile = status->pfile_prev;
+ /* Try to keep this error message constant length
+ * in case it occurs several times. */
+ apr_snprintf(status->errbuf, sizeof status->errbuf,
+ "Resetting log file due to error opening "
+ "new log file, %10d messages lost: %-25.25s\n",
+ status->nMessCount, error);
+ nWrite = strlen(status->errbuf);
+ apr_file_trunc(status->nLogFD, 0);
+ if (apr_file_write(status->nLogFD, status->errbuf, &nWrite) != APR_SUCCESS) {
+ fprintf(stderr, "Error writing to the file %s\n", status->filename);
+ exit(2);
+ }
+ }
+ }
+ else {
+ closeFile(config, status->pfile_prev, status->nLogFDprev);
+ status->nLogFDprev = NULL;
+ status->pfile_prev = NULL;
+ }
+ status->nMessCount = 0;
+ if (config->linkfile) {
+ apr_file_remove(config->linkfile, status->pfile);
+ if (config->verbose) {
+ fprintf(stderr,"Linking %s to %s\n", status->filename, config->linkfile);
+ }
+ rv = apr_file_link(status->filename, config->linkfile);
+ if (rv != APR_SUCCESS) {
+ char error[120];
+ apr_strerror(rv, error, sizeof error);
+ fprintf(stderr, "Error linking file %s to %s (%s)\n",
+ status->filename, config->linkfile, error);
+ exit(2);
+ }
+ }
+}
+
+/*
+ * Get a size or time param from a string.
+ * Parameter 'last' indicates, whether the
+ * argument is the last commadnline argument.
+ * UTC offset is only allowed as a last argument
+ * in order to make is distinguishable from the
+ * rotation interval time.
+ */
+static const char *get_time_or_size(rotate_config_t *config,
+ const char *arg, int last) {
+ char *ptr = NULL;
+ /* Byte multiplier */
+ unsigned int mult = 1;
+ if ((ptr = strchr(arg, 'B')) != NULL) { /* Found KB size */
+ mult = 1;
+ }
+ else if ((ptr = strchr(arg, 'K')) != NULL) { /* Found KB size */
+ mult = 1024;
+ }
+ else if ((ptr = strchr(arg, 'M')) != NULL) { /* Found MB size */
+ mult = 1024 * 1024;
+ }
+ else if ((ptr = strchr(arg, 'G')) != NULL) { /* Found GB size */
+ mult = 1024 * 1024 * 1024;
+ }
+ if (ptr) { /* rotation based on file size */
+ if (config->sRotation > 0) {
+ return "Rotation size parameter allowed only once";
+ }
+ if (*(ptr+1) == '\0') {
+ config->sRotation = atoi(arg) * mult;
+ }
+ if (config->sRotation == 0) {
+ return "Invalid rotation size parameter";
+ }
+ }
+ else if ((config->sRotation > 0 || config->tRotation > 0) && last) {
+ /* rotation based on elapsed time */
+ if (config->use_localtime) {
+ return "UTC offset parameter is not valid with -l";
+ }
+ config->utc_offset = atoi(arg) * 60;
+ }
+ else { /* rotation based on elapsed time */
+ if (config->tRotation > 0) {
+ return "Rotation time parameter allowed only once";
+ }
+ config->tRotation = atoi(arg);
+ if (config->tRotation <= 0) {
+ return "Invalid rotation time parameter";
+ }
+ }
+ return NULL;
+}
+
+int main (int argc, const char * const argv[])
+{
+ char buf[BUFSIZE];
+ apr_size_t nRead, nWrite;
+ apr_file_t *f_stdin;
+ apr_getopt_t *opt;
+ apr_status_t rv;
+ char c;
+ const char *opt_arg;
+ const char *err = NULL;
+
+ apr_app_initialize(&argc, &argv, NULL);
+ atexit(apr_terminate);
+
+ config.sRotation = 0;
+ config.tRotation = 0;
+ config.utc_offset = 0;
+ config.use_localtime = 0;
+ config.use_strftime = 0;
+ config.force_open = 0;
+ config.verbose = 0;
+ status.pool = NULL;
+ status.pfile = NULL;
+ status.pfile_prev = NULL;
+ status.nLogFD = NULL;
+ status.nLogFDprev = NULL;
+ status.tLogEnd = 0;
+ status.rotateReason = ROTATE_NONE;
+ status.nMessCount = 0;
+
+ apr_pool_create(&status.pool, NULL);
+ apr_getopt_init(&opt, status.pool, argc, argv);
+ while ((rv = apr_getopt(opt, "lL:ftv", &c, &opt_arg)) == APR_SUCCESS) {
+ switch (c) {
+ case 'l':
+ config.use_localtime = 1;
+ break;
+ case 'L':
+ config.linkfile = opt_arg;
+ break;
+ case 'f':
+ config.force_open = 1;
+ break;
+ case 't':
+ config.truncate = 1;
+ break;
+ case 'v':
+ config.verbose = 1;
+ break;
+ }
+ }
+
+ if (rv != APR_EOF) {
+ usage(argv[0], NULL /* specific error message already issued */ );
+ }
+
+ /*
+ * After the initial flags we need 2 to 4 arguments,
+ * the file name, either the rotation interval time or size
+ * or both of them, and optionally the UTC offset.
+ */
+ if ((argc - opt->ind < 2) || (argc - opt->ind > 4) ) {
+ usage(argv[0], "Incorrect number of arguments");
+ }
+
+ config.szLogRoot = argv[opt->ind++];
+
+ /* Read in the remaining flags, namely time, size and UTC offset. */
+ for(; opt->ind < argc; opt->ind++) {
+ if ((err = get_time_or_size(&config, argv[opt->ind],
+ opt->ind < argc - 1 ? 0 : 1)) != NULL) {
+ usage(argv[0], err);
}
}
- use_strftime = (strchr(szLogRoot, '%') != NULL);
- if (apr_file_open_stdin(&f_stdin, pool) != APR_SUCCESS) {
+ config.use_strftime = (strchr(config.szLogRoot, '%') != NULL);
+
+ if (apr_file_open_stdin(&f_stdin, status.pool) != APR_SUCCESS) {
fprintf(stderr, "Unable to open stdin\n");
exit(1);
}
+ /*
+ * Write out result of config parsing if verbose is set.
+ */
+ if (config.verbose) {
+ dumpConfig(&config);
+ }
+
+ /*
+ * Immediately open the logfile as we start, if we were forced
+ * to do so via '-f'.
+ */
+ if (config.force_open) {
+ doRotate(&config, &status);
+ }
+
for (;;) {
nRead = sizeof(buf);
- if (apr_file_read(f_stdin, buf, &nRead) != APR_SUCCESS)
+ rv = apr_file_read(f_stdin, buf, &nRead);
+ if (rv != APR_SUCCESS) {
exit(3);
- if (tRotation) {
- now = (int)(apr_time_now() / APR_USEC_PER_SEC) + utc_offset;
- if (nLogFD != NULL && now >= tLogEnd) {
- nLogFDprev = nLogFD;
- nLogFD = NULL;
- }
}
- else if (sRotation) {
- apr_finfo_t finfo;
- apr_off_t current_size = -1;
+ checkRotate(&config, &status);
+ if (status.rotateReason != ROTATE_NONE) {
+ doRotate(&config, &status);
+ }
- if ((nLogFD != NULL) &&
- (apr_file_info_get(&finfo, APR_FINFO_SIZE, nLogFD) == APR_SUCCESS)) {
- current_size = finfo.size;
- }
+ nWrite = nRead;
+ rv = apr_file_write(status.nLogFD, buf, &nWrite);
+ if (rv == APR_SUCCESS && nWrite != nRead) {
+ /* buffer partially written, which for rotatelogs means we encountered
+ * an error such as out of space or quota or some other limit reached;
+ * try to write the rest so we get the real error code
+ */
+ apr_size_t nWritten = nWrite;
- if (current_size > sRotation) {
- nLogFDprev = nLogFD;
- nLogFD = NULL;
- }
- }
- else {
- fprintf(stderr, "No rotation time or size specified\n");
- exit(2);
+ nRead = nRead - nWritten;
+ nWrite = nRead;
+ rv = apr_file_write(status.nLogFD, buf + nWritten, &nWrite);
}
+ if (nWrite != nRead) {
+ char strerrbuf[120];
+ apr_off_t cur_offset;
- if (nLogFD == NULL) {
- int tLogStart;
-
- if (tRotation)
- tLogStart = (now / tRotation) * tRotation;
- else
- tLogStart = (int)apr_time_sec(apr_time_now());
-
- if (use_strftime) {
- apr_time_t tNow = apr_time_from_sec(tLogStart);
- apr_time_exp_t e;
- apr_size_t rs;
-
- apr_time_exp_gmt(&e, tNow);
- apr_strftime(buf2, &rs, sizeof(buf2), szLogRoot, &e);
- }
- else {
- sprintf(buf2, "%s.%010d", szLogRoot, tLogStart);
- }
- tLogEnd = tLogStart + tRotation;
- apr_file_open(&nLogFD, buf2, APR_READ | APR_WRITE | APR_CREATE | APR_APPEND,
- APR_OS_DEFAULT, pool);
- if (nLogFD == NULL) {
- /* Uh-oh. Failed to open the new log file. Try to clear
- * the previous log file, note the lost log entries,
- * and keep on truckin'. */
- if (nLogFDprev == NULL) {
- fprintf(stderr, "1 Previous file handle doesn't exists %s\n", buf2);
- exit(2);
- }
- else {
- nLogFD = nLogFDprev;
- sprintf(errbuf,
- "Resetting log file due to error opening "
- "new log file. %10d messages lost.\n",
- nMessCount);
- nWrite = strlen(errbuf);
- apr_file_trunc(nLogFD, 0);
- if (apr_file_write(nLogFD, errbuf, &nWrite) != APR_SUCCESS) {
- fprintf(stderr, "Error writing to the file %s\n", buf2);
- exit(2);
- }
- }
- }
- else if (nLogFDprev) {
- apr_file_close(nLogFDprev);
+ cur_offset = 0;
+ if (apr_file_seek(status.nLogFD, APR_CUR, &cur_offset) != APR_SUCCESS) {
+ cur_offset = -1;
}
- nMessCount = 0;
- }
- nWrite = nRead;
- apr_file_write(nLogFD, buf, &nWrite);
- if (nWrite != nRead) {
- nMessCount++;
- sprintf(errbuf,
- "Error writing to log file. "
- "%10d messages lost.\n",
- nMessCount);
- nWrite = strlen(errbuf);
- apr_file_trunc(nLogFD, 0);
- if (apr_file_write(nLogFD, errbuf, &nWrite) != APR_SUCCESS) {
- fprintf(stderr, "Error writing to the file %s\n", buf2);
+ apr_strerror(rv, strerrbuf, sizeof strerrbuf);
+ status.nMessCount++;
+ apr_snprintf(status.errbuf, sizeof status.errbuf,
+ "Error %d writing to log file at offset %" APR_OFF_T_FMT ". "
+ "%10d messages lost (%s)\n",
+ rv, cur_offset, status.nMessCount, strerrbuf);
+ nWrite = strlen(status.errbuf);
+ apr_file_trunc(status.nLogFD, 0);
+ if (apr_file_write(status.nLogFD, status.errbuf, &nWrite) != APR_SUCCESS) {
+ fprintf(stderr, "Error writing to the file %s\n", status.filename);
exit(2);
}
}
else {
- nMessCount++;
+ status.nMessCount++;
}
}
/* Of course we never, but prevent compiler warnings */
projects / apache / blobdiff