-/* ====================================================================
- * The Apache Software License, Version 1.1
+/* Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
*
- * Copyright (c) 2000-2002 The Apache Software Foundation. All rights
- * reserved.
+ * http://www.apache.org/licenses/LICENSE-2.0
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * 3. The end-user documentation included with the redistribution,
- * if any, must include the following acknowledgment:
- * "This product includes software developed by the
- * Apache Software Foundation (http://www.apache.org/)."
- * Alternately, this acknowledgment may appear in the software itself,
- * if and wherever such third-party acknowledgments normally appear.
- *
- * 4. The names "Apache" and "Apache Software Foundation" must
- * not be used to endorse or promote products derived from this
- * software without prior written permission. For written
- * permission, please contact apache@apache.org.
- *
- * 5. Products derived from this software may not be called "Apache",
- * nor may "Apache" appear in their name, without prior written
- * permission of the Apache Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * ====================================================================
- *
- * This software consists of voluntary contributions made by many
- * individuals on behalf of the Apache Software Foundation. For more
- * information on the Apache Software Foundation, please see
- * <http://www.apache.org/>.
- *
- * Portions of this software are based upon public domain software
- * originally written at the National Center for Supercomputing Applications,
- * University of Illinois, Urbana-Champaign.
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
*/
/******************************************************************************
/*
* htpasswd.c: simple program for manipulating password file for
* the Apache HTTP server
- *
+ *
* Originally by Rob McCool
*
* Exit values:
* 5: Failure; buffer would overflow (username, filename, or computed
* record too long)
* 6: Failure; username contains illegal or reserved characters
+ * 7: Failure; file is not a valid htpasswd file
*/
-#include "apr.h"
-#include "apr_lib.h"
-#include "apr_strings.h"
-#include "apr_errno.h"
-#include "apr_file_io.h"
-#include "apr_general.h"
+#include "passwd_common.h"
#include "apr_signal.h"
+#include "apr_getopt.h"
#if APR_HAVE_STDIO_H
#include <stdio.h>
#include "apr_md5.h"
#include "apr_sha1.h"
-#include <time.h>
-#if APR_HAVE_CRYPT_H
-#include <crypt.h>
-#endif
#if APR_HAVE_STDLIB_H
#include <stdlib.h>
#endif
#define unlink _unlink
#endif
-#if !APR_CHARSET_EBCDIC
-#define LF 10
-#define CR 13
-#else /*APR_CHARSET_EBCDIC*/
-#define LF '\n'
-#define CR '\r'
-#endif /*APR_CHARSET_EBCDIC*/
-
-#define MAX_STRING_LEN 256
-#define ALG_PLAIN 0
-#define ALG_CRYPT 1
-#define ALG_APMD5 2
-#define ALG_APSHA 3
-
-#define ERR_FILEPERM 1
-#define ERR_SYNTAX 2
-#define ERR_PWMISMATCH 3
-#define ERR_INTERRUPTED 4
-#define ERR_OVERFLOW 5
-#define ERR_BADUSER 6
-
#define APHTP_NEWFILE 1
#define APHTP_NOFILE 2
-#define APHTP_NONINTERACTIVE 4
+#define APHTP_DELUSER 4
+#define APHTP_VERIFY 8
-apr_file_t *errfile;
apr_file_t *ftemp = NULL;
-static void to64(char *s, unsigned long v, int n)
-{
- static unsigned char itoa64[] = /* 0 ... 63 => ASCII - 64 */
- "./0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz";
-
- while (--n >= 0) {
- *s++ = itoa64[v&0x3f];
- v >>= 6;
- }
-}
-
-static void putline(apr_file_t *f, const char *l)
+static int mkrecord(struct passwd_ctx *ctx, char *user)
{
- apr_file_puts(l, f);
-}
-
-/*
- * Make a password record from the given information. A zero return
- * indicates success; failure means that the output buffer contains an
- * error message instead.
- */
-static int mkrecord(char *user, char *record, size_t rlen, char *passwd,
- int alg)
-{
- char *pw;
- char cpw[120];
- char pwin[MAX_STRING_LEN];
- char pwv[MAX_STRING_LEN];
- char salt[9];
- size_t bufsize;
-
- if (passwd != NULL) {
- pw = passwd;
- }
- else {
- bufsize = sizeof(pwin);
- if (apr_password_get("New password: ", pwin, &bufsize) != 0) {
- apr_snprintf(record, (rlen - 1), "password too long (>%" APR_SIZE_T_FMT
- ")", sizeof(pwin) - 1);
- return ERR_OVERFLOW;
- }
- bufsize = sizeof(pwv);
- apr_password_get("Re-type new password: ", pwv, &bufsize);
- if (strcmp(pwin, pwv) != 0) {
- apr_cpystrn(record, "password verification error", (rlen - 1));
- return ERR_PWMISMATCH;
- }
- pw = pwin;
- memset(pwv, '\0', sizeof(pwin));
- }
- switch (alg) {
-
- case ALG_APSHA:
- /* XXX cpw >= 28 + strlen(sha1) chars - fixed len SHA */
- apr_sha1_base64(pw,strlen(pw),cpw);
- break;
-
- case ALG_APMD5:
- (void) srand((int) time((time_t *) NULL));
- to64(&salt[0], rand(), 8);
- salt[8] = '\0';
-
- apr_md5_encode((const char *)pw, (const char *)salt,
- cpw, sizeof(cpw));
- break;
-
- case ALG_PLAIN:
- /* XXX this len limitation is not in sync with any HTTPd len. */
- apr_cpystrn(cpw,pw,sizeof(cpw));
- break;
-
-#if !(defined(WIN32) || defined(NETWARE))
- case ALG_CRYPT:
- default:
- (void) srand((int) time((time_t *) NULL));
- to64(&salt[0], rand(), 8);
- salt[8] = '\0';
-
- apr_cpystrn(cpw, (char *)crypt(pw, salt), sizeof(cpw) - 1);
- break;
-#endif
- }
- memset(pw, '\0', strlen(pw));
-
- /*
- * Check to see if the buffer is large enough to hold the username,
- * hash, and delimiters.
- */
- if ((strlen(user) + 1 + strlen(cpw)) > (rlen - 1)) {
- apr_cpystrn(record, "resultant record too long", (rlen - 1));
+ char hash_str[MAX_STRING_LEN];
+ int ret;
+ ctx->out = hash_str;
+ ctx->out_len = sizeof(hash_str);
+
+ ret = mkhash(ctx);
+ if (ret)
+ return ret;
+
+ ctx->out = apr_pstrcat(ctx->pool, user, ":", hash_str, NL, NULL);
+ if (strlen(ctx->out) >= MAX_STRING_LEN) {
+ ctx->errstr = "resultant record too long";
return ERR_OVERFLOW;
}
- strcpy(record, user);
- strcat(record, ":");
- strcat(record, cpw);
- strcat(record, "\n");
return 0;
}
static void usage(void)
{
- apr_file_printf(errfile, "Usage:\n");
- apr_file_printf(errfile, "\thtpasswd [-cmdps] passwordfile username\n");
- apr_file_printf(errfile, "\thtpasswd -b[cmdps] passwordfile username password\n\n");
- apr_file_printf(errfile, "\thtpasswd -n[mdps] username\n");
- apr_file_printf(errfile, "\thtpasswd -nb[mdps] username password\n");
- apr_file_printf(errfile, " -c Create a new file.\n");
- apr_file_printf(errfile, " -n Don't update file; display results on stdout.\n");
- apr_file_printf(errfile, " -m Force MD5 encryption of the password"
-#if defined(WIN32) || defined(TPF) || defined(NETWARE)
- " (default)"
-#endif
- ".\n");
- apr_file_printf(errfile, " -d Force CRYPT encryption of the password"
-#if (!(defined(WIN32) || defined(TPF) || defined(NETWARE)))
- " (default)"
-#endif
- ".\n");
- apr_file_printf(errfile, " -p Do not encrypt the password (plaintext).\n");
- apr_file_printf(errfile, " -s Force SHA encryption of the password.\n");
- apr_file_printf(errfile, " -b Use the password from the command line rather "
- "than prompting for it.\n");
- apr_file_printf(errfile,
- "On Windows, NetWare and TPF systems the '-m' flag is used by default.\n");
- apr_file_printf(errfile,
- "On all other systems, the '-p' flag will probably not work.\n");
+ apr_file_printf(errfile, "Usage:" NL
+ "\thtpasswd [-cimBdpsDv] [-C cost] passwordfile username" NL
+ "\thtpasswd -b[cmBdpsDv] [-C cost] passwordfile username password" NL
+ NL
+ "\thtpasswd -n[imBdps] [-C cost] username" NL
+ "\thtpasswd -nb[mBdps] [-C cost] username password" NL
+ " -c Create a new file." NL
+ " -n Don't update file; display results on stdout." NL
+ " -b Use the password from the command line rather than prompting "
+ "for it." NL
+ " -i Read password from stdin without verification (for script usage)." NL
+ " -m Force MD5 encryption of the password (default)." NL
+ " -B Force bcrypt encryption of the password (very secure)." NL
+ " -C Set the computing time used for the bcrypt algorithm" NL
+ " (higher is more secure but slower, default: %d, valid: 4 to 31)." NL
+ " -d Force CRYPT encryption of the password (8 chars max, insecure)." NL
+ " -s Force SHA encryption of the password (insecure)." NL
+ " -p Do not encrypt the password (plaintext, insecure)." NL
+ " -D Delete the specified user." NL
+ " -v Verify password for the specified user." NL
+ "On other systems than Windows and NetWare the '-p' flag will "
+ "probably not work." NL
+ "The SHA algorithm does not use a salt and is less secure than the "
+ "MD5 algorithm." NL,
+ BCRYPT_DEFAULT_COST
+ );
exit(ERR_SYNTAX);
}
return 1;
}
-/*
- * Return true if a file is readable.
- */
-static int readable(apr_pool_t *pool, char *fname)
-{
- return accessible(pool, fname, APR_READ);
-}
-
-/*
- * Return true if the specified file can be opened for write access.
- */
-static int writable(apr_pool_t *pool, char *fname)
-{
- return accessible(pool, fname, APR_APPEND);
-}
-
/*
* Return true if the named file exists, regardless of permissions.
*/
return ((check || sbuf.filetype != APR_REG) ? 0 : 1);
}
-#ifdef NETWARE
-void nwTerminate()
+static void terminate(void)
{
+ apr_terminate();
+#ifdef NETWARE
pressanykey();
-}
#endif
+}
-static void check_args(apr_pool_t *pool, int argc, const char *const argv[],
- int *alg, int *mask, char **user, char **pwfilename,
- char **password)
+static void check_args(int argc, const char *const argv[],
+ struct passwd_ctx *ctx, unsigned *mask, char **user,
+ char **pwfilename)
{
const char *arg;
int args_left = 2;
- int i;
+ int i, ret;
+ apr_getopt_t *state;
+ apr_status_t rv;
+ char opt;
+ const char *opt_arg;
+ apr_pool_t *pool = ctx->pool;
- /*
- * Preliminary check to make sure they provided at least
- * three arguments, we'll do better argument checking as
- * we parse the command line.
- */
- if (argc < 3) {
- usage();
- }
+ rv = apr_getopt_init(&state, pool, argc, argv);
+ if (rv != APR_SUCCESS)
+ exit(ERR_SYNTAX);
- /*
- * Go through the argument list and pick out any options. They
- * have to precede any other arguments.
- */
- for (i = 1; i < argc; i++) {
- arg = argv[i];
- if (*arg != '-') {
+ while ((rv = apr_getopt(state, "cnmspdBbDiC:v", &opt, &opt_arg)) == APR_SUCCESS) {
+ switch (opt) {
+ case 'c':
+ *mask |= APHTP_NEWFILE;
break;
- }
- while (*++arg != '\0') {
- if (*arg == 'c') {
- *mask |= APHTP_NEWFILE;
- }
- else if (*arg == 'n') {
- *mask |= APHTP_NOFILE;
- args_left--;
- }
- else if (*arg == 'm') {
- *alg = ALG_APMD5;
- }
- else if (*arg == 's') {
- *alg = ALG_APSHA;
- }
- else if (*arg == 'p') {
- *alg = ALG_PLAIN;
- }
- else if (*arg == 'd') {
- *alg = ALG_CRYPT;
- }
- else if (*arg == 'b') {
- *mask |= APHTP_NONINTERACTIVE;
- args_left++;
- }
- else {
- usage();
+ case 'n':
+ args_left--;
+ *mask |= APHTP_NOFILE;
+ break;
+ case 'D':
+ *mask |= APHTP_DELUSER;
+ break;
+ case 'v':
+ *mask |= APHTP_VERIFY;
+ break;
+ default:
+ ret = parse_common_options(ctx, opt, opt_arg);
+ if (ret) {
+ apr_file_printf(errfile, "%s: %s" NL, argv[0], ctx->errstr);
+ exit(ret);
}
}
}
+ if (ctx->passwd_src == PW_ARG)
+ args_left++;
+ if (rv != APR_EOF)
+ usage();
- if ((*mask & APHTP_NEWFILE) && (*mask & APHTP_NOFILE)) {
- apr_file_printf(errfile, "%s: -c and -n options conflict\n", argv[0]);
+ if ((*mask) & (*mask - 1)) {
+ /* not a power of two, i.e. more than one flag specified */
+ apr_file_printf(errfile, "%s: only one of -c -n -v -D may be specified" NL,
+ argv[0]);
exit(ERR_SYNTAX);
}
+ if ((*mask & APHTP_VERIFY) && ctx->passwd_src == PW_PROMPT)
+ ctx->passwd_src = PW_PROMPT_VERIFY;
+
/*
* Make sure we still have exactly the right number of arguments left
* (the filename, the username, and possibly the password if -b was
* specified).
*/
+ i = state->ind;
if ((argc - i) != args_left) {
usage();
}
- if (*mask & APHTP_NOFILE) {
- i--;
- }
- else {
+ if (!(*mask & APHTP_NOFILE)) {
if (strlen(argv[i]) > (APR_PATH_MAX - 1)) {
- apr_file_printf(errfile, "%s: filename too long\n", argv[0]);
- exit(ERR_OVERFLOW);
- }
- *pwfilename = apr_pstrdup(pool, argv[i]);
- if (strlen(argv[i + 1]) > (MAX_STRING_LEN - 1)) {
- apr_file_printf(errfile, "%s: username too long (> %d)\n",
- argv[0], MAX_STRING_LEN - 1);
+ apr_file_printf(errfile, "%s: filename too long" NL, argv[0]);
exit(ERR_OVERFLOW);
}
+ *pwfilename = apr_pstrdup(pool, argv[i++]);
+ }
+ if (strlen(argv[i]) > (MAX_STRING_LEN - 1)) {
+ apr_file_printf(errfile, "%s: username too long (> %d)" NL,
+ argv[0], MAX_STRING_LEN - 1);
+ exit(ERR_OVERFLOW);
}
- *user = apr_pstrdup(pool, argv[i + 1]);
+ *user = apr_pstrdup(pool, argv[i++]);
if ((arg = strchr(*user, ':')) != NULL) {
- apr_file_printf(errfile, "%s: username contains illegal character '%c'\n",
- argv[0], *arg);
+ apr_file_printf(errfile, "%s: username contains illegal "
+ "character '%c'" NL, argv[0], *arg);
exit(ERR_BADUSER);
}
- if (*mask & APHTP_NONINTERACTIVE) {
- if (strlen(argv[i + 2]) > (MAX_STRING_LEN - 1)) {
- apr_file_printf(errfile, "%s: password too long (> %d)\n",
+ if (ctx->passwd_src == PW_ARG) {
+ if (strlen(argv[i]) > (MAX_STRING_LEN - 1)) {
+ apr_file_printf(errfile, "%s: password too long (> %d)" NL,
argv[0], MAX_STRING_LEN);
exit(ERR_OVERFLOW);
}
- *password = apr_pstrdup(pool, argv[i + 2]);
+ ctx->passwd = apr_pstrdup(pool, argv[i]);
+ }
+}
+
+static int verify(struct passwd_ctx *ctx, const char *hash)
+{
+ apr_status_t rv;
+ int ret;
+
+ if (ctx->passwd == NULL && (ret = get_password(ctx)) != 0)
+ return ret;
+ rv = apr_password_validate(ctx->passwd, hash);
+ if (rv == APR_SUCCESS)
+ return 0;
+ if (APR_STATUS_IS_EMISMATCH(rv)) {
+ ctx->errstr = "password verification failed";
+ return ERR_PWMISMATCH;
}
+ ctx->errstr = apr_psprintf(ctx->pool, "Could not verify password: %pm",
+ &rv);
+ return ERR_GENERAL;
}
/*
int main(int argc, const char * const argv[])
{
apr_file_t *fpw = NULL;
- char record[MAX_STRING_LEN];
char line[MAX_STRING_LEN];
- char *password = NULL;
char *pwfilename = NULL;
char *user = NULL;
char tn[] = "htpasswd.tmp.XXXXXX";
- char scratch[MAX_STRING_LEN];
+ char *dirname;
+ char *scratch, cp[MAX_STRING_LEN];
int found = 0;
int i;
- int alg = ALG_CRYPT;
- int mask = 0;
+ unsigned mask = 0;
apr_pool_t *pool;
+ int existing_file = 0;
+ struct passwd_ctx ctx = { 0 };
#if APR_CHARSET_EBCDIC
apr_status_t rv;
apr_xlate_t *to_ascii;
#endif
apr_app_initialize(&argc, &argv, NULL);
- atexit(apr_terminate);
-#ifdef NETWARE
- atexit(nwTerminate);
-#endif
+ atexit(terminate);
apr_pool_create(&pool, NULL);
+ apr_pool_abort_set(abort_on_oom, pool);
apr_file_open_stderr(&errfile, pool);
+ ctx.pool = pool;
+ ctx.alg = ALG_APMD5;
#if APR_CHARSET_EBCDIC
- rv = apr_xlate_open(&to_ascii, "ISO8859-1", APR_DEFAULT_CHARSET, pool);
+ rv = apr_xlate_open(&to_ascii, "ISO-8859-1", APR_DEFAULT_CHARSET, pool);
if (rv) {
- apr_file_printf(errfile, "apr_xlate_open(to ASCII)->%d\n", rv);
+ apr_file_printf(errfile, "apr_xlate_open(to ASCII)->%d" NL, rv);
exit(1);
}
rv = apr_SHA1InitEBCDIC(to_ascii);
if (rv) {
- apr_file_printf(errfile, "apr_SHA1InitEBCDIC()->%d\n", rv);
+ apr_file_printf(errfile, "apr_SHA1InitEBCDIC()->%d" NL, rv);
exit(1);
}
rv = apr_MD5InitEBCDIC(to_ascii);
if (rv) {
- apr_file_printf(errfile, "apr_MD5InitEBCDIC()->%d\n", rv);
+ apr_file_printf(errfile, "apr_MD5InitEBCDIC()->%d" NL, rv);
exit(1);
}
#endif /*APR_CHARSET_EBCDIC*/
- check_args(pool, argc, argv, &alg, &mask, &user, &pwfilename, &password);
-
+ check_args(argc, argv, &ctx, &mask, &user, &pwfilename);
-#if defined(WIN32) || defined(NETWARE)
- if (alg == ALG_CRYPT) {
- alg = ALG_APMD5;
- apr_file_printf(errfile, "Automatically using MD5 format.\n");
- }
-#endif
-
-#if (!(defined(WIN32) || defined(TPF) || defined(NETWARE)))
- if (alg == ALG_PLAIN) {
- apr_file_printf(errfile,"Warning: storing passwords as plain text might "
- "just not work on this platform.\n");
- }
-#endif
- if (! mask & APHTP_NOFILE) {
- /*
- * Only do the file checks if we're supposed to frob it.
- *
- * Verify that the file exists if -c was omitted. We give a special
- * message if it doesn't.
- */
- if ((! mask & APHTP_NEWFILE) && (! exists(pwfilename, pool))) {
- apr_file_printf(errfile,
- "%s: cannot modify file %s; use '-c' to create it\n",
- argv[0], pwfilename);
- perror("apr_file_open");
- exit(ERR_FILEPERM);
- }
- /*
- * Verify that we can read the existing file in the case of an update
- * to it (rather than creation of a new one).
- */
- if ((! mask & APHTP_NEWFILE) && (! readable(pool, pwfilename))) {
- apr_file_printf(errfile, "%s: cannot open file %s for read access\n",
- argv[0], pwfilename);
- perror("apr_file_open");
- exit(ERR_FILEPERM);
- }
- /*
- * Now check to see if we can preserve an existing file in case
- * of password verification errors on a -c operation.
- */
- if ((mask & APHTP_NEWFILE) && exists(pwfilename, pool) &&
- (! readable(pool, pwfilename))) {
- apr_file_printf(errfile, "%s: cannot open file %s for read access\n"
- "%s: existing auth data would be lost on "
- "password mismatch",
- argv[0], pwfilename, argv[0]);
- perror("apr_file_open");
- exit(ERR_FILEPERM);
+ /*
+ * Only do the file checks if we're supposed to frob it.
+ */
+ if (!(mask & APHTP_NOFILE)) {
+ existing_file = exists(pwfilename, pool);
+ if (existing_file) {
+ /*
+ * Check that this existing file is readable and writable.
+ */
+ if (!accessible(pool, pwfilename, APR_FOPEN_READ|APR_FOPEN_WRITE)) {
+ apr_file_printf(errfile, "%s: cannot open file %s for "
+ "read/write access" NL, argv[0], pwfilename);
+ exit(ERR_FILEPERM);
+ }
}
- /*
- * Now verify that the file is writable!
- */
- if (! writable(pool, pwfilename)) {
- apr_file_printf(errfile, "%s: cannot open file %s for write access\n",
- argv[0], pwfilename);
- perror("apr_file_open");
- exit(ERR_FILEPERM);
+ else {
+ /*
+ * Error out if -c was omitted for this non-existant file.
+ */
+ if (!(mask & APHTP_NEWFILE)) {
+ apr_file_printf(errfile,
+ "%s: cannot modify file %s; use '-c' to create it" NL,
+ argv[0], pwfilename);
+ exit(ERR_FILEPERM);
+ }
+ /*
+ * As it doesn't exist yet, verify that we can create it.
+ */
+ if (!accessible(pool, pwfilename, APR_FOPEN_WRITE|APR_FOPEN_CREATE)) {
+ apr_file_printf(errfile, "%s: cannot create file %s" NL,
+ argv[0], pwfilename);
+ exit(ERR_FILEPERM);
+ }
}
}
* Any error message text is returned in the record buffer, since
* the mkrecord() routine doesn't have access to argv[].
*/
- i = mkrecord(user, record, sizeof(record) - 1,
- password, alg);
- if (i != 0) {
- apr_file_printf(errfile, "%s: %s\n", argv[0], record);
- exit(i);
- }
- if (mask & APHTP_NOFILE) {
- printf("%s\n", record);
- exit(0);
+ if ((mask & (APHTP_DELUSER|APHTP_VERIFY)) == 0) {
+ i = mkrecord(&ctx, user);
+ if (i != 0) {
+ apr_file_printf(errfile, "%s: %s" NL, argv[0], ctx.errstr);
+ exit(i);
+ }
+ if (mask & APHTP_NOFILE) {
+ printf("%s" NL, ctx.out);
+ exit(0);
+ }
}
- /*
- * We can access the files the right way, and we have a record
- * to add or update. Let's do it..
- */
- if (apr_file_mktemp(&ftemp, tn, 0, pool) != APR_SUCCESS) {
- apr_file_printf(errfile, "%s: unable to create temporary file '%s'\n",
- argv[0], tn);
- exit(ERR_FILEPERM);
+ if ((mask & APHTP_VERIFY) == 0) {
+ /*
+ * We can access the files the right way, and we have a record
+ * to add or update. Let's do it..
+ */
+ if (apr_temp_dir_get((const char**)&dirname, pool) != APR_SUCCESS) {
+ apr_file_printf(errfile, "%s: could not determine temp dir" NL,
+ argv[0]);
+ exit(ERR_FILEPERM);
+ }
+ dirname = apr_psprintf(pool, "%s/%s", dirname, tn);
+
+ if (apr_file_mktemp(&ftemp, dirname, 0, pool) != APR_SUCCESS) {
+ apr_file_printf(errfile, "%s: unable to create temporary file %s" NL,
+ argv[0], dirname);
+ exit(ERR_FILEPERM);
+ }
}
/*
* If we're not creating a new file, copy records from the existing
* one to the temporary file until we find the specified user.
*/
- if (apr_file_open(&fpw, pwfilename, APR_READ, APR_OS_DEFAULT,
- pool) == APR_SUCCESS) {
- while (! (apr_file_gets(line, sizeof(line), fpw))) {
+ if (existing_file && !(mask & APHTP_NEWFILE)) {
+ if (apr_file_open(&fpw, pwfilename, APR_READ | APR_BUFFERED,
+ APR_OS_DEFAULT, pool) != APR_SUCCESS) {
+ apr_file_printf(errfile, "%s: unable to read file %s" NL,
+ argv[0], pwfilename);
+ exit(ERR_FILEPERM);
+ }
+ while (apr_file_gets(line, sizeof(line), fpw) == APR_SUCCESS) {
char *colon;
- if ((line[0] == '#') || (line[0] == '\0')) {
+ strcpy(cp, line);
+ scratch = cp;
+ while (apr_isspace(*scratch)) {
+ ++scratch;
+ }
+
+ if (!*scratch || (*scratch == '#')) {
putline(ftemp, line);
continue;
}
- strcpy(scratch, line);
/*
* See if this is our user.
*/
if (colon != NULL) {
*colon = '\0';
}
+ else {
+ /*
+ * If we've not got a colon on the line, this could well
+ * not be a valid htpasswd file.
+ * We should bail at this point.
+ */
+ apr_file_printf(errfile, "%s: The file %s does not appear "
+ "to be a valid htpasswd file." NL,
+ argv[0], pwfilename);
+ apr_file_close(fpw);
+ exit(ERR_INVALID);
+ }
if (strcmp(user, scratch) != 0) {
putline(ftemp, line);
continue;
}
else {
- /* We found the user we were looking for, add him to the file.
- */
- apr_file_printf(errfile, "Updating ");
- putline(ftemp, record);
+ /* We found the user we were looking for */
found++;
+ if ((mask & APHTP_DELUSER)) {
+ /* Delete entry from the file */
+ apr_file_printf(errfile, "Deleting ");
+ }
+ else if ((mask & APHTP_VERIFY)) {
+ /* Verify */
+ char *hash = colon + 1;
+ size_t len;
+
+ len = strcspn(hash, "\r\n");
+ if (len == 0) {
+ apr_file_printf(errfile, "Empty hash for user %s" NL,
+ user);
+ exit(ERR_INVALID);
+ }
+ hash[len] = '\0';
+
+ i = verify(&ctx, hash);
+ if (i != 0) {
+ apr_file_printf(errfile, "%s" NL, ctx.errstr);
+ exit(i);
+ }
+ }
+ else {
+ /* Update entry */
+ apr_file_printf(errfile, "Updating ");
+ putline(ftemp, ctx.out);
+ }
}
}
+ apr_file_close(fpw);
}
if (!found) {
- apr_file_printf(errfile, "Adding ");
- putline(ftemp, record);
+ if (mask & APHTP_DELUSER) {
+ apr_file_printf(errfile, "User %s not found" NL, user);
+ exit(0);
+ }
+ else if (mask & APHTP_VERIFY) {
+ apr_file_printf(errfile, "User %s not found" NL, user);
+ exit(ERR_BADUSER);
+ }
+ else {
+ apr_file_printf(errfile, "Adding ");
+ putline(ftemp, ctx.out);
+ }
}
- apr_file_printf(errfile, "password for user %s\n", user);
- apr_file_close(fpw);
+ if (mask & APHTP_VERIFY) {
+ apr_file_printf(errfile, "Password for user %s correct." NL, user);
+ exit(0);
+ }
+
+ apr_file_printf(errfile, "password for user %s" NL, user);
/* The temporary file has all the data, just copy it to the new location.
*/
- apr_file_copy(tn, pwfilename, APR_FILE_SOURCE_PERMS, pool);
+ if (apr_file_copy(dirname, pwfilename, APR_FILE_SOURCE_PERMS, pool) !=
+ APR_SUCCESS) {
+ apr_file_printf(errfile, "%s: unable to update file %s" NL,
+ argv[0], pwfilename);
+ exit(ERR_FILEPERM);
+ }
apr_file_close(ftemp);
return 0;
}