* The following is set using configure.
*/
+/* Set to 1 if you have <netdb.h> */
+#undef HAVE_NETDB_H
+
+/* Set to 1 if you have <endian.h> */
+#undef HAVE_ENDIAN_H
+
+/* Set to 1 if you have <crypt.h> */
+#undef HAVE_CRYPT_H
+
/* Set to 1 if you have <termios.h> */
#undef HAVE_TERMIOS_H
+/* Set to 1 if you have <float.h> */
+#undef HAVE_FLOAT_H
+
/* Set to 1 if you have <limits.h> */
#undef HAVE_LIMITS_H
/* Set to 1 if you have <history.h> */
#undef HAVE_HISTORY
+/* Set to 1 if you have <readline/history.h> */
+#undef HAVE_READLINE_HISTORY_H
+
+/* Set to 1 if you have <dld.h> */
+#undef HAVE_DLD_H
+
/* Set to 1 if you have isinf() */
#undef HAVE_ISINF
/* Set to 1 if you have cbrt() */
#undef HAVE_CBRT
-/* Set to 1 if you have cbrt() */
+/* Set to 1 if you have inet_aton() */
#undef HAVE_INET_ATON
+/* Set to 1 if you have fcvt() */
+#undef HAVE_FCVT
+
+/* Set to 1 if you have strerror() */
+#undef HAVE_STRERROR
+
/* Set to 1 if you have rint() */
#undef HAVE_RINT
/* Set to 1 if you have kill() */
#undef HAVE_KILL
+/* Set to 1 if you have vfork() */
+#undef HAVE_VFORK
+
/* Set to 1 if you have sysconf() */
#undef HAVE_SYSCONF
/* Set to 1 if you have getrusage() */
#undef HAVE_GETRUSAGE
-/* Set to 1 if you have libreadline.a */
-#undef HAVE_LIBREADLINE
-
-/* Set to 1 if you have libhistory.a */
-#undef HAVE_LIBHISTORY
-
-/*
- * Code below this point should not require changes
- */
-
-#if defined(aix)
-# define CLASS_CONFLICT
-# define DISABLE_XOPEN_NLS
-# define NEED_UNION_SEMUN
-# define HAVE_SYS_SELECT_H
-# define HAVE_ANSI_CPP
-# define HAS_TEST_AND_SET
- typedef unsigned int slock_t;
-#endif
-
-#if defined(alpha)
-# define USE_POSIX_TIME
-# define USE_POSIX_SIGNALS
-# define DISABLE_XOPEN_NLS
-# define HAS_LONG_LONG
-# define NEED_UNION_SEMUN
-# define HAS_TEST_AND_SET
-# include <sys/mman.h> /* for msemaphore */
- typedef msemaphore slock_t;
-#endif
-
-#if defined(BSD44_derived)
-# define USE_POSIX_TIME
-# define NEED_I386_TAS_ASM
-# define HAS_TEST_AND_SET
-# if defined(__mips__)
-/* # undef HAS_TEST_AND_SET */
-# endif
- typedef unsigned char slock_t;
-#endif
-
-#if defined(bsdi)
-# if defined(i386)
-# define NEED_I386_TAS_ASM
-# endif
-# if defined(sparc)
-# define NEED_SPARC_TAS_ASM
-# endif
-# if defined(PRE_BSDI_2_1)
-# define NEED_UNION_SEMUN
-# endif
-# define USE_POSIX_TIME
-# define HAS_TEST_AND_SET
- typedef unsigned char slock_t;
-#endif
-
-
-#if defined(dgux)
-# define LINUX_ELF
-# define NEED_UNION_SEMUN
-# define USE_POSIX_SIGNALS
-#endif
-
-#if defined(hpux)
-# define JMP_BUF
-# define USE_POSIX_TIME
-# define NEED_UNION_SEMUN
-# define HAS_TEST_AND_SET
- typedef struct { int sem[4]; } slock_t;
-#endif
-
-#if defined(i386_solaris)
-# define USE_POSIX_TIME
-# define USE_POSIX_SIGNALS
-# define NEED_RUSAGE
-# define NO_EMPTY_STMTS
-# define NEED_UNION_SEMUN
-# define SYSV_DIRENT
-# define HAS_TEST_AND_SET
- typedef unsigned char slock_t;
-#endif
+/* Set to 1 if you have waitpid() */
+#undef HAVE_WAITPID
-#if defined(irix5)
-# define USE_POSIX_TIME
-# define USE_POSIX_SIGNALS
-# define NO_EMPTY_STMTS
-# define NO_VFORK
-# define SYSV_DIRENT
-# define HAS_TEST_AND_SET
-# include <abi_mutex.h>
- typedef abilock_t slock_t;
-#endif
+/* Set to 1 if you have setsid() */
+#undef HAVE_SETSID
-#if defined(linux)
-/* __USE_POSIX, __USE_BSD, and __USE_BSD_SIGNAL used to be defined either
- here or with -D compile options, but __ macros should be set and used by C
- library macros, not Postgres code. __USE_POSIX is set by features.h,
- __USE_BSD is set by bsd/signal.h, and __USE_BSD_SIGNAL appears not to
- be used.
-*/
-# define JMP_BUF
-# define USE_POSIX_TIME
-# define NEED_I386_TAS_ASM
-# define HAS_TEST_AND_SET
- typedef unsigned char slock_t;
-#endif
+/* Set to 1 if you have sigprocmask() */
+#undef HAVE_SIGPROCMASK
-#if defined(nextstep)
-# include <sys/ioctl.h>
-# if defined(__STRICT_ANSI__)
-# define isascii(c) ((unsigned)(c)<=0177)
-# endif
- extern char* strdup (const char* string);
-# ifndef _POSIX_SOURCE
- typedef unsigned short mode_t;
- typedef int sigset_t;
-# define SIG_BLOCK 00
-# define SIG_UNBLOCK 01
-# define SIG_SETMASK 02
-# define NO_SIGACTION
-# define NO_SETSID
-# define NO_SIGPROCMASK
-# define NEED_SIG_JMP
-# endif
-
-# define JMP_BUF
-# define NO_WAITPID
- typedef struct mutex slock_t;
-#endif
+/* Set to 1 if you have strdup() */
+#undef HAVE_STRDUP
-#if defined(sequent)
-# define NEED_UNION_SEMUN
-#endif
+/* Set to 1 if you have libreadline.a */
+#undef HAVE_LIBREADLINE
-#if defined(sparc_solaris)
-# define USE_POSIX_TIME
-# define USE_POSIX_SIGNALS
-# define NEED_RUSAGE
-# define NO_EMPTY_STMTS
-# define USE_POSIX_TIME
-# define NEED_UNION_SEMUN
-# define SYSV_DIRENT
-# define HAS_TEST_AND_SET
-typedef unsigned char slock_t;
-#endif
+/* Set to 1 if you have libhistory.a */
+#undef HAVE_LIBHISTORY
-#if defined(sunos4)
-# define USE_POSIX_TIME
-/* # undef HAVE_MEMMOVE */
-#endif
+/* Set to 1 if you have union semun */
+#undef HAVE_UNION_SEMUN
-#if defined(svr4)
-# define USE_POSIX_TIME
-# define USE_POSIX_SIGNALS
-# define NEED_RUSAGE
-# define NO_EMPTY_STMTS
-# define NEED_UNION_SEMUN
-# define SYSV_DIRENT
-#endif
+/* Set to 1 if you want to USE_LOCALE */
+#undef USE_LOCALE
-#if defined(win32)
-# define JMP_BUF
-# define NEED_SIG_JMP
-# define NO_UNISTD_H
-# define USES_WINSOCK
-# define NOFILE 100
-# define NEED_UNION_SEMUN
-# ifndef MAXPATHLEN
-# define MAXPATHLEN 250
-# endif
-#endif /* WIN32 */
-
-#if defined(ultrix4)
-# define USE_POSIX_TIME
-# define NEED_UNION_SEMUN
-# define NEED_STRDUP
-#endif
+/* Set to 1 if you want to Disable ASSERT CHECKING */
+#undef NO_ASSERT_CHECKING
-/* This patch changes the behavior of aclcheck for groups. Currently an user
- * can access a table only if he has the required permission for ALL the groups
- * defined for that table. With my patch he can access a table if he has the
- * permission for ONE of the groups, which seems to me a more useful thing.
- *
- * Used in: src/backend/tcop/aclchk.c
- * Submitted by: Massimo Dal Zotto <dz@cs.unitn.it>
+/*
+ * Code below this point should not require changes
*/
-#define ACLGROUP_PATCH
+#include "os.h"
/*
* The following is used as the arg list for signal handlers. Any ports
/*
* DEF_PGPORT is the TCP port number on which the Postmaster listens by
* default. This can be overriden by command options, environment variables,
- * and the postconfig hook.
+ * and the postconfig hook. (set by build script)
*/
-#define DEF_PGPORT "5432"
-
-/* turn this on if you prefer European style dates instead of American
- * style dates
- */
-/* #define EUROPEAN_DATES */
+#undef DEF_PGPORT
/*
* If you do not plan to use Host based authentication,
- * comment out the following line
+ * comment out the following line (set by build script)
*/
-#define HBA
+#undef HBA
/*
* On architectures for which we have not implemented spinlocks (or
/* #define OLD_REWRITE */
/* #define NOTYET */
+/* Genetic Query Optimization (GEQO):
+ *
+ * The GEQO module in PostgreSQL is intended for the solution of the
+ * query optimization problem by means of a Genetic Algorithm (GA).
+ * It allows the handling of large JOIN queries through non-exhaustive
+ * search.
+ * For further information see README.GEQO <utesch@aut.tu-freiberg.de>.
+ */
+#define GEQO /* backend/optimizer/path/allpaths.c */
-/* Undocumented "features"? */
-#define FASTBUILD /* access/nbtree/nbtsort.c */
-
-
-
+/*
+ * Define this if you want psql to _always_ ask for a username and a password
+ * for password authentication.
+ */
+/* #define PSQL_ALWAYS_GET_PASSWORDS */
+/*
+ * Use btree bulkload code:
+ * this code is moderately slow (~10% slower) compared to the regular
+ * btree (insertion) build code on sorted or well-clustered data. on
+ * random data, however, the insertion build code is unusable -- the
+ * difference on a 60MB heap is a factor of 15 because the random
+ * probes into the btree thrash the buffer pool.
+ *
+ * Great thanks to Paul M. Aoki (aoki@CS.Berkeley.EDU)
+ */
+#define FASTBUILD /* access/nbtree/nbtsort.c */
+/*
+ * BTREE_VERSION_1: we must guarantee that all tuples in A LEVEL
+ * are unique, not in ALL INDEX. So, we can use bti_itup->t_tid
+ * as unique identifier for a given index tuple (logical position
+ * within a level) and take off bti_oid & bti_dummy (8 bytes total)
+ * from btree items.
+ */
+#define BTREE_VERSION_1
#endif /* CONFIG_H */
-