* INTERFACE ROUTINES
* ExecutorStart()
* ExecutorRun()
+ * ExecutorFinish()
* ExecutorEnd()
*
- * The old ExecutorMain() has been replaced by ExecutorStart(),
- * ExecutorRun() and ExecutorEnd()
- *
- * These three procedures are the external interfaces to the executor.
+ * These four procedures are the external interface to the executor.
* In each case, the query descriptor is required as an argument.
*
- * ExecutorStart() must be called at the beginning of execution of any
- * query plan and ExecutorEnd() should always be called at the end of
- * execution of a plan.
+ * ExecutorStart must be called at the beginning of execution of any
+ * query plan and ExecutorEnd must always be called at the end of
+ * execution of a plan (unless it is aborted due to error).
*
* ExecutorRun accepts direction and count arguments that specify whether
* the plan is to be executed forwards, backwards, and for how many tuples.
+ * In some cases ExecutorRun may be called multiple times to process all
+ * the tuples for a plan. It is also acceptable to stop short of executing
+ * the whole plan (but only if it is a SELECT).
+ *
+ * ExecutorFinish must be called after the final ExecutorRun call and
+ * before ExecutorEnd. This can be omitted only in case of EXPLAIN,
+ * which should also omit ExecutorRun.
*
- * Portions Copyright (c) 1996-2010, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1996-2015, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
*
*/
#include "postgres.h"
-#include "access/reloptions.h"
+#include "access/htup_details.h"
#include "access/sysattr.h"
#include "access/transam.h"
#include "access/xact.h"
-#include "catalog/heap.h"
#include "catalog/namespace.h"
-#include "catalog/toasting.h"
-#include "commands/tablespace.h"
+#include "commands/matview.h"
#include "commands/trigger.h"
#include "executor/execdebug.h"
-#include "executor/instrument.h"
+#include "foreign/fdwapi.h"
+#include "mb/pg_wchar.h"
#include "miscadmin.h"
#include "optimizer/clauses.h"
-#include "parser/parse_clause.h"
#include "parser/parsetree.h"
#include "storage/bufmgr.h"
#include "storage/lmgr.h"
-#include "storage/smgr.h"
#include "tcop/utility.h"
#include "utils/acl.h"
#include "utils/lsyscache.h"
#include "utils/memutils.h"
+#include "utils/rls.h"
#include "utils/snapmgr.h"
#include "utils/tqual.h"
-/* Hooks for plugins to get control in ExecutorStart/Run/End() */
+/* Hooks for plugins to get control in ExecutorStart/Run/Finish/End */
ExecutorStart_hook_type ExecutorStart_hook = NULL;
ExecutorRun_hook_type ExecutorRun_hook = NULL;
+ExecutorFinish_hook_type ExecutorFinish_hook = NULL;
ExecutorEnd_hook_type ExecutorEnd_hook = NULL;
/* Hook for plugin to get control in ExecCheckRTPerms() */
/* decls for local routines only used within this module */
static void InitPlan(QueryDesc *queryDesc, int eflags);
+static void CheckValidRowMarkRel(Relation rel, RowMarkType markType);
+static void ExecPostprocessPlan(EState *estate);
static void ExecEndPlan(PlanState *planstate, EState *estate);
static void ExecutePlan(EState *estate, PlanState *planstate,
CmdType operation,
DestReceiver *dest);
static bool ExecCheckRTEPerms(RangeTblEntry *rte);
static void ExecCheckXactReadOnly(PlannedStmt *plannedstmt);
+static char *ExecBuildSlotValueDescription(Oid reloid,
+ TupleTableSlot *slot,
+ TupleDesc tupdesc,
+ Bitmapset *modifiedCols,
+ int maxfieldlen);
static void EvalPlanQualStart(EPQState *epqstate, EState *parentestate,
Plan *planTree);
-static void OpenIntoRel(QueryDesc *queryDesc);
-static void CloseIntoRel(QueryDesc *queryDesc);
-static void intorel_startup(DestReceiver *self, int operation, TupleDesc typeinfo);
-static void intorel_receive(TupleTableSlot *slot, DestReceiver *self);
-static void intorel_shutdown(DestReceiver *self);
-static void intorel_destroy(DestReceiver *self);
+
+/*
+ * Note that this macro also exists in commands/trigger.c. There does not
+ * appear to be any good header to put it into, given the structures that
+ * it uses, so we let them be duplicated. Be sure to update both if one needs
+ * to be changed, however.
+ */
+#define GetModifiedColumns(relinfo, estate) \
+ (rt_fetch((relinfo)->ri_RangeTableIndex, (estate)->es_range_table)->modifiedCols)
/* end of local decls */
* This routine must be called at the beginning of any execution of any
* query plan
*
- * Takes a QueryDesc previously created by CreateQueryDesc (it's not real
- * clear why we bother to separate the two functions, but...). The tupDesc
+ * Takes a QueryDesc previously created by CreateQueryDesc (which is separate
+ * only because some places use QueryDescs for utility commands). The tupDesc
* field of the QueryDesc is filled in to describe the tuples that will be
* returned, and the internal fields (estate and planstate) are set up.
*
switch (queryDesc->operation)
{
case CMD_SELECT:
- /* SELECT INTO and SELECT FOR UPDATE/SHARE need to mark tuples */
- if (queryDesc->plannedstmt->intoClause != NULL ||
- queryDesc->plannedstmt->rowMarks != NIL)
+
+ /*
+ * SELECT FOR [KEY] UPDATE/SHARE and modifying CTEs need to mark
+ * tuples
+ */
+ if (queryDesc->plannedstmt->rowMarks != NIL ||
+ queryDesc->plannedstmt->hasModifyingCTE)
estate->es_output_cid = GetCurrentCommandId(true);
+
+ /*
+ * A SELECT without modifying CTEs can't possibly queue triggers,
+ * so force skip-triggers mode. This is just a marginal efficiency
+ * hack, since AfterTriggerBeginQuery/AfterTriggerEndQuery aren't
+ * all that expensive, but we might as well do it.
+ */
+ if (!queryDesc->plannedstmt->hasModifyingCTE)
+ eflags |= EXEC_FLAG_SKIP_TRIGGERS;
break;
case CMD_INSERT:
*/
estate->es_snapshot = RegisterSnapshot(queryDesc->snapshot);
estate->es_crosscheck_snapshot = RegisterSnapshot(queryDesc->crosscheck_snapshot);
+ estate->es_top_eflags = eflags;
estate->es_instrument = queryDesc->instrument_options;
/*
*/
InitPlan(queryDesc, eflags);
+ /*
+ * Set up an AFTER-trigger statement context, unless told not to, or
+ * unless it's EXPLAIN-only mode (when ExecutorFinish won't be called).
+ */
+ if (!(eflags & (EXEC_FLAG_SKIP_TRIGGERS | EXEC_FLAG_EXPLAIN_ONLY)))
+ AfterTriggerBeginQuery();
+
MemoryContextSwitchTo(oldcontext);
}
* we retrieve up to 'count' tuples in the specified direction.
*
* Note: count = 0 is interpreted as no portal limit, i.e., run to
- * completion.
+ * completion. Also note that the count limit is only applied to
+ * retrieved tuples, not for instance to those inserted/updated/deleted
+ * by a ModifyTable plan node.
*
* There is no return value, but output tuples (if any) are sent to
* the destination receiver specified in the QueryDesc; and the number
estate = queryDesc->estate;
Assert(estate != NULL);
+ Assert(!(estate->es_top_eflags & EXEC_FLAG_EXPLAIN_ONLY));
/*
* Switch into per-query memory context
*/
oldcontext = MemoryContextSwitchTo(estate->es_query_cxt);
- /* Allow instrumentation of ExecutorRun overall runtime */
+ /* Allow instrumentation of Executor overall runtime */
if (queryDesc->totaltime)
InstrStartNode(queryDesc->totaltime);
MemoryContextSwitchTo(oldcontext);
}
+/* ----------------------------------------------------------------
+ * ExecutorFinish
+ *
+ * This routine must be called after the last ExecutorRun call.
+ * It performs cleanup such as firing AFTER triggers. It is
+ * separate from ExecutorEnd because EXPLAIN ANALYZE needs to
+ * include these actions in the total runtime.
+ *
+ * We provide a function hook variable that lets loadable plugins
+ * get control when ExecutorFinish is called. Such a plugin would
+ * normally call standard_ExecutorFinish().
+ *
+ * ----------------------------------------------------------------
+ */
+void
+ExecutorFinish(QueryDesc *queryDesc)
+{
+ if (ExecutorFinish_hook)
+ (*ExecutorFinish_hook) (queryDesc);
+ else
+ standard_ExecutorFinish(queryDesc);
+}
+
+void
+standard_ExecutorFinish(QueryDesc *queryDesc)
+{
+ EState *estate;
+ MemoryContext oldcontext;
+
+ /* sanity checks */
+ Assert(queryDesc != NULL);
+
+ estate = queryDesc->estate;
+
+ Assert(estate != NULL);
+ Assert(!(estate->es_top_eflags & EXEC_FLAG_EXPLAIN_ONLY));
+
+ /* This should be run once and only once per Executor instance */
+ Assert(!estate->es_finished);
+
+ /* Switch into per-query memory context */
+ oldcontext = MemoryContextSwitchTo(estate->es_query_cxt);
+
+ /* Allow instrumentation of Executor overall runtime */
+ if (queryDesc->totaltime)
+ InstrStartNode(queryDesc->totaltime);
+
+ /* Run ModifyTable nodes to completion */
+ ExecPostprocessPlan(estate);
+
+ /* Execute queued AFTER triggers, unless told not to */
+ if (!(estate->es_top_eflags & EXEC_FLAG_SKIP_TRIGGERS))
+ AfterTriggerEndQuery(estate);
+
+ if (queryDesc->totaltime)
+ InstrStopNode(queryDesc->totaltime, 0);
+
+ MemoryContextSwitchTo(oldcontext);
+
+ estate->es_finished = true;
+}
+
/* ----------------------------------------------------------------
* ExecutorEnd
*
Assert(estate != NULL);
+ /*
+ * Check that ExecutorFinish was called, unless in EXPLAIN-only mode. This
+ * Assert is needed because ExecutorFinish is new as of 9.1, and callers
+ * might forget to call it.
+ */
+ Assert(estate->es_finished ||
+ (estate->es_top_eflags & EXEC_FLAG_EXPLAIN_ONLY));
+
/*
* Switch into per-query memory context to run ExecEndPlan
*/
ExecEndPlan(queryDesc->planstate, estate);
- /*
- * Close the SELECT INTO relation if any
- */
- if (estate->es_select_into)
- CloseIntoRel(queryDesc);
-
/* do away with our snapshots */
UnregisterSnapshot(estate->es_snapshot);
UnregisterSnapshot(estate->es_crosscheck_snapshot);
*
* Returns true if permissions are adequate. Otherwise, throws an appropriate
* error if ereport_on_violation is true, or simply returns false otherwise.
+ *
+ * Note that this does NOT address row level security policies (aka: RLS). If
+ * rows will be returned to the user as a result of this permission check
+ * passing, then RLS also needs to be consulted (and check_enable_rls()).
+ *
+ * See rewrite/rowsecurity.c.
*/
bool
ExecCheckRTPerms(List *rangeTable, bool ereport_on_violation)
foreach(l, rangeTable)
{
- RangeTblEntry *rte = (RangeTblEntry *) lfirst(l);
+ RangeTblEntry *rte = (RangeTblEntry *) lfirst(l);
result = ExecCheckRTEPerms(rte);
if (!result)
}
if (ExecutorCheckPerms_hook)
- result = (*ExecutorCheckPerms_hook)(rangeTable,
- ereport_on_violation);
+ result = (*ExecutorCheckPerms_hook) (rangeTable,
+ ereport_on_violation);
return result;
}
AclMode remainingPerms;
Oid relOid;
Oid userid;
- Bitmapset *tmpset;
int col;
/*
* userid to check as: current user unless we have a setuid indication.
*
* Note: GetUserId() is presently fast enough that there's no harm in
- * calling it separately for each RTE. If that stops being true, we could
+ * calling it separately for each RTE. If that stops being true, we could
* call it once in ExecCheckRTPerms and pass the userid down from there.
* But for now, no need for the extra clutter.
*/
return false;
}
- tmpset = bms_copy(rte->selectedCols);
- while ((col = bms_first_member(tmpset)) >= 0)
+ col = -1;
+ while ((col = bms_next_member(rte->selectedCols, col)) >= 0)
{
- /* remove the column number offset */
- col += FirstLowInvalidHeapAttributeNumber;
- if (col == InvalidAttrNumber)
+ /* bit #s are offset by FirstLowInvalidHeapAttributeNumber */
+ AttrNumber attno = col + FirstLowInvalidHeapAttributeNumber;
+
+ if (attno == InvalidAttrNumber)
{
/* Whole-row reference, must have priv on all cols */
if (pg_attribute_aclcheck_all(relOid, userid, ACL_SELECT,
}
else
{
- if (pg_attribute_aclcheck(relOid, col, userid,
+ if (pg_attribute_aclcheck(relOid, attno, userid,
ACL_SELECT) != ACLCHECK_OK)
return false;
}
}
- bms_free(tmpset);
}
/*
return false;
}
- tmpset = bms_copy(rte->modifiedCols);
- while ((col = bms_first_member(tmpset)) >= 0)
+ col = -1;
+ while ((col = bms_next_member(rte->modifiedCols, col)) >= 0)
{
- /* remove the column number offset */
- col += FirstLowInvalidHeapAttributeNumber;
- if (col == InvalidAttrNumber)
+ /* bit #s are offset by FirstLowInvalidHeapAttributeNumber */
+ AttrNumber attno = col + FirstLowInvalidHeapAttributeNumber;
+
+ if (attno == InvalidAttrNumber)
{
/* whole-row reference can't happen here */
elog(ERROR, "whole-row update is not implemented");
}
else
{
- if (pg_attribute_aclcheck(relOid, col, userid,
+ if (pg_attribute_aclcheck(relOid, attno, userid,
remainingPerms) != ACLCHECK_OK)
return false;
}
}
- bms_free(tmpset);
}
}
return true;
{
ListCell *l;
- /*
- * CREATE TABLE AS or SELECT INTO?
- *
- * XXX should we allow this if the destination is temp? Considering that
- * it would still require catalog changes, probably not.
- */
- if (plannedstmt->intoClause != NULL)
- PreventCommandIfReadOnly(CreateCommandTag((Node *) plannedstmt));
-
/* Fail if write permissions are requested on any non-temp table */
foreach(l, plannedstmt->rtable)
{
InitResultRelInfo(resultRelInfo,
resultRelation,
resultRelationIndex,
- operation,
estate->es_instrument);
resultRelInfo++;
}
}
/*
- * Similarly, we have to lock relations selected FOR UPDATE/FOR SHARE
+ * Similarly, we have to lock relations selected FOR [KEY] UPDATE/SHARE
* before we initialize the plan tree, else we'd be risking lock upgrades.
* While we are at it, build the ExecRowMark list.
*/
switch (rc->markType)
{
case ROW_MARK_EXCLUSIVE:
+ case ROW_MARK_NOKEYEXCLUSIVE:
case ROW_MARK_SHARE:
+ case ROW_MARK_KEYSHARE:
relid = getrelid(rc->rti, rangeTable);
relation = heap_open(relid, RowShareLock);
break;
break;
}
+ /* Check that relation is a legal target for marking */
+ if (relation)
+ CheckValidRowMarkRel(relation, rc->markType);
+
erm = (ExecRowMark *) palloc(sizeof(ExecRowMark));
erm->relation = relation;
erm->rti = rc->rti;
erm->prti = rc->prti;
+ erm->rowmarkId = rc->rowmarkId;
erm->markType = rc->markType;
- erm->noWait = rc->noWait;
- erm->ctidAttNo = rc->ctidAttNo;
- erm->toidAttNo = rc->toidAttNo;
- erm->wholeAttNo = rc->wholeAttNo;
+ erm->waitPolicy = rc->waitPolicy;
ItemPointerSetInvalid(&(erm->curCtid));
estate->es_rowMarks = lappend(estate->es_rowMarks, erm);
}
- /*
- * Detect whether we're doing SELECT INTO. If so, set the es_into_oids
- * flag appropriately so that the plan tree will be initialized with the
- * correct tuple descriptors. (Other SELECT INTO stuff comes later.)
- */
- estate->es_select_into = false;
- if (operation == CMD_SELECT && plannedstmt->intoClause != NULL)
- {
- estate->es_select_into = true;
- estate->es_into_oids = interpretOidsOption(plannedstmt->intoClause->options);
- }
-
/*
* Initialize the executor's tuple table to empty.
*/
estate->es_tupleTable = NIL;
estate->es_trig_tuple_slot = NULL;
estate->es_trig_oldtup_slot = NULL;
+ estate->es_trig_newtup_slot = NULL;
/* mark EvalPlanQual not active */
estate->es_epqTuple = NULL;
* it is a parameterless subplan (not initplan), we suggest that it be
* prepared to handle REWIND efficiently; otherwise there is no need.
*/
- sp_eflags = eflags & EXEC_FLAG_EXPLAIN_ONLY;
+ sp_eflags = eflags
+ & (EXEC_FLAG_EXPLAIN_ONLY | EXEC_FLAG_WITH_NO_DATA);
if (bms_is_member(i, plannedstmt->rewindPlanIDs))
sp_eflags |= EXEC_FLAG_REWIND;
planstate = ExecInitNode(plan, estate, eflags);
/*
- * Get the tuple descriptor describing the type of tuples to return. (this
- * is especially important if we are creating a relation with "SELECT
- * INTO")
+ * Get the tuple descriptor describing the type of tuples to return.
*/
tupType = ExecGetResultType(planstate);
queryDesc->tupDesc = tupType;
queryDesc->planstate = planstate;
-
- /*
- * If doing SELECT INTO, initialize the "into" relation. We must wait
- * till now so we have the "clean" result tuple type to create the new
- * table from.
- *
- * If EXPLAIN, skip creating the "into" relation.
- */
- if (estate->es_select_into && !(eflags & EXEC_FLAG_EXPLAIN_ONLY))
- OpenIntoRel(queryDesc);
}
/*
- * Initialize ResultRelInfo data for one result relation
+ * Check that a proposed result relation is a legal target for the operation
+ *
+ * Generally the parser and/or planner should have noticed any such mistake
+ * already, but let's make sure.
+ *
+ * Note: when changing this function, you probably also need to look at
+ * CheckValidRowMarkRel.
*/
void
-InitResultRelInfo(ResultRelInfo *resultRelInfo,
- Relation resultRelationDesc,
- Index resultRelationIndex,
- CmdType operation,
- int instrument_options)
+CheckValidResultRel(Relation resultRel, CmdType operation)
{
- /*
- * Check valid relkind ... parser and/or planner should have noticed this
- * already, but let's make sure.
- */
- switch (resultRelationDesc->rd_rel->relkind)
+ TriggerDesc *trigDesc = resultRel->trigdesc;
+ FdwRoutine *fdwroutine;
+
+ switch (resultRel->rd_rel->relkind)
{
case RELKIND_RELATION:
/* OK */
ereport(ERROR,
(errcode(ERRCODE_WRONG_OBJECT_TYPE),
errmsg("cannot change sequence \"%s\"",
- RelationGetRelationName(resultRelationDesc))));
+ RelationGetRelationName(resultRel))));
break;
case RELKIND_TOASTVALUE:
ereport(ERROR,
(errcode(ERRCODE_WRONG_OBJECT_TYPE),
errmsg("cannot change TOAST relation \"%s\"",
- RelationGetRelationName(resultRelationDesc))));
+ RelationGetRelationName(resultRel))));
break;
case RELKIND_VIEW:
+
+ /*
+ * Okay only if there's a suitable INSTEAD OF trigger. Messages
+ * here should match rewriteHandler.c's rewriteTargetView, except
+ * that we omit errdetail because we haven't got the information
+ * handy (and given that we really shouldn't get here anyway, it's
+ * not worth great exertion to get).
+ */
+ switch (operation)
+ {
+ case CMD_INSERT:
+ if (!trigDesc || !trigDesc->trig_insert_instead_row)
+ ereport(ERROR,
+ (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
+ errmsg("cannot insert into view \"%s\"",
+ RelationGetRelationName(resultRel)),
+ errhint("To enable inserting into the view, provide an INSTEAD OF INSERT trigger or an unconditional ON INSERT DO INSTEAD rule.")));
+ break;
+ case CMD_UPDATE:
+ if (!trigDesc || !trigDesc->trig_update_instead_row)
+ ereport(ERROR,
+ (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
+ errmsg("cannot update view \"%s\"",
+ RelationGetRelationName(resultRel)),
+ errhint("To enable updating the view, provide an INSTEAD OF UPDATE trigger or an unconditional ON UPDATE DO INSTEAD rule.")));
+ break;
+ case CMD_DELETE:
+ if (!trigDesc || !trigDesc->trig_delete_instead_row)
+ ereport(ERROR,
+ (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
+ errmsg("cannot delete from view \"%s\"",
+ RelationGetRelationName(resultRel)),
+ errhint("To enable deleting from the view, provide an INSTEAD OF DELETE trigger or an unconditional ON DELETE DO INSTEAD rule.")));
+ break;
+ default:
+ elog(ERROR, "unrecognized CmdType: %d", (int) operation);
+ break;
+ }
+ break;
+ case RELKIND_MATVIEW:
+ if (!MatViewIncrementalMaintenanceIsEnabled())
+ ereport(ERROR,
+ (errcode(ERRCODE_WRONG_OBJECT_TYPE),
+ errmsg("cannot change materialized view \"%s\"",
+ RelationGetRelationName(resultRel))));
+ break;
+ case RELKIND_FOREIGN_TABLE:
+ /* Okay only if the FDW supports it */
+ fdwroutine = GetFdwRoutineForRelation(resultRel, false);
+ switch (operation)
+ {
+ case CMD_INSERT:
+ if (fdwroutine->ExecForeignInsert == NULL)
+ ereport(ERROR,
+ (errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
+ errmsg("cannot insert into foreign table \"%s\"",
+ RelationGetRelationName(resultRel))));
+ if (fdwroutine->IsForeignRelUpdatable != NULL &&
+ (fdwroutine->IsForeignRelUpdatable(resultRel) & (1 << CMD_INSERT)) == 0)
+ ereport(ERROR,
+ (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
+ errmsg("foreign table \"%s\" does not allow inserts",
+ RelationGetRelationName(resultRel))));
+ break;
+ case CMD_UPDATE:
+ if (fdwroutine->ExecForeignUpdate == NULL)
+ ereport(ERROR,
+ (errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
+ errmsg("cannot update foreign table \"%s\"",
+ RelationGetRelationName(resultRel))));
+ if (fdwroutine->IsForeignRelUpdatable != NULL &&
+ (fdwroutine->IsForeignRelUpdatable(resultRel) & (1 << CMD_UPDATE)) == 0)
+ ereport(ERROR,
+ (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
+ errmsg("foreign table \"%s\" does not allow updates",
+ RelationGetRelationName(resultRel))));
+ break;
+ case CMD_DELETE:
+ if (fdwroutine->ExecForeignDelete == NULL)
+ ereport(ERROR,
+ (errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
+ errmsg("cannot delete from foreign table \"%s\"",
+ RelationGetRelationName(resultRel))));
+ if (fdwroutine->IsForeignRelUpdatable != NULL &&
+ (fdwroutine->IsForeignRelUpdatable(resultRel) & (1 << CMD_DELETE)) == 0)
+ ereport(ERROR,
+ (errcode(ERRCODE_OBJECT_NOT_IN_PREREQUISITE_STATE),
+ errmsg("foreign table \"%s\" does not allow deletes",
+ RelationGetRelationName(resultRel))));
+ break;
+ default:
+ elog(ERROR, "unrecognized CmdType: %d", (int) operation);
+ break;
+ }
+ break;
+ default:
+ ereport(ERROR,
+ (errcode(ERRCODE_WRONG_OBJECT_TYPE),
+ errmsg("cannot change relation \"%s\"",
+ RelationGetRelationName(resultRel))));
+ break;
+ }
+}
+
+/*
+ * Check that a proposed rowmark target relation is a legal target
+ *
+ * In most cases parser and/or planner should have noticed this already, but
+ * they don't cover all cases.
+ */
+static void
+CheckValidRowMarkRel(Relation rel, RowMarkType markType)
+{
+ switch (rel->rd_rel->relkind)
+ {
+ case RELKIND_RELATION:
+ /* OK */
+ break;
+ case RELKIND_SEQUENCE:
+ /* Must disallow this because we don't vacuum sequences */
+ ereport(ERROR,
+ (errcode(ERRCODE_WRONG_OBJECT_TYPE),
+ errmsg("cannot lock rows in sequence \"%s\"",
+ RelationGetRelationName(rel))));
+ break;
+ case RELKIND_TOASTVALUE:
+ /* We could allow this, but there seems no good reason to */
+ ereport(ERROR,
+ (errcode(ERRCODE_WRONG_OBJECT_TYPE),
+ errmsg("cannot lock rows in TOAST relation \"%s\"",
+ RelationGetRelationName(rel))));
+ break;
+ case RELKIND_VIEW:
+ /* Should not get here; planner should have expanded the view */
+ ereport(ERROR,
+ (errcode(ERRCODE_WRONG_OBJECT_TYPE),
+ errmsg("cannot lock rows in view \"%s\"",
+ RelationGetRelationName(rel))));
+ break;
+ case RELKIND_MATVIEW:
+ /* Allow referencing a matview, but not actual locking clauses */
+ if (markType != ROW_MARK_REFERENCE)
+ ereport(ERROR,
+ (errcode(ERRCODE_WRONG_OBJECT_TYPE),
+ errmsg("cannot lock rows in materialized view \"%s\"",
+ RelationGetRelationName(rel))));
+ break;
+ case RELKIND_FOREIGN_TABLE:
+ /* Should not get here; planner should have used ROW_MARK_COPY */
ereport(ERROR,
(errcode(ERRCODE_WRONG_OBJECT_TYPE),
- errmsg("cannot change view \"%s\"",
- RelationGetRelationName(resultRelationDesc))));
+ errmsg("cannot lock rows in foreign table \"%s\"",
+ RelationGetRelationName(rel))));
break;
default:
ereport(ERROR,
(errcode(ERRCODE_WRONG_OBJECT_TYPE),
- errmsg("cannot change relation \"%s\"",
- RelationGetRelationName(resultRelationDesc))));
+ errmsg("cannot lock rows in relation \"%s\"",
+ RelationGetRelationName(rel))));
break;
}
+}
- /* OK, fill in the node */
+/*
+ * Initialize ResultRelInfo data for one result relation
+ *
+ * Caution: before Postgres 9.1, this function included the relkind checking
+ * that's now in CheckValidResultRel, and it also did ExecOpenIndices if
+ * appropriate. Be sure callers cover those needs.
+ */
+void
+InitResultRelInfo(ResultRelInfo *resultRelInfo,
+ Relation resultRelationDesc,
+ Index resultRelationIndex,
+ int instrument_options)
+{
MemSet(resultRelInfo, 0, sizeof(ResultRelInfo));
resultRelInfo->type = T_ResultRelInfo;
resultRelInfo->ri_RangeTableIndex = resultRelationIndex;
resultRelInfo->ri_TrigWhenExprs = NULL;
resultRelInfo->ri_TrigInstrument = NULL;
}
+ if (resultRelationDesc->rd_rel->relkind == RELKIND_FOREIGN_TABLE)
+ resultRelInfo->ri_FdwRoutine = GetFdwRoutineForRelation(resultRelationDesc, true);
+ else
+ resultRelInfo->ri_FdwRoutine = NULL;
+ resultRelInfo->ri_FdwState = NULL;
resultRelInfo->ri_ConstraintExprs = NULL;
resultRelInfo->ri_junkFilter = NULL;
resultRelInfo->ri_projectReturning = NULL;
-
- /*
- * If there are indices on the result relation, open them and save
- * descriptors in the result relation info, so that we can add new index
- * entries for the tuples we add/update. We need not do this for a
- * DELETE, however, since deletion doesn't affect indexes.
- */
- if (resultRelationDesc->rd_rel->relhasindex &&
- operation != CMD_DELETE)
- ExecOpenIndices(resultRelInfo);
}
/*
* if so it doesn't matter which one we pick.) However, it is sometimes
* necessary to fire triggers on other relations; this happens mainly when an
* RI update trigger queues additional triggers on other relations, which will
- * be processed in the context of the outer query. For efficiency's sake,
+ * be processed in the context of the outer query. For efficiency's sake,
* we want to have a ResultRelInfo for those triggers too; that can avoid
* repeated re-opening of the relation. (It also provides a way for EXPLAIN
* ANALYZE to report the runtimes of such triggers.) So we make additional
/*
* Open the target relation's relcache entry. We assume that an
* appropriate lock is still held by the backend from whenever the trigger
- * event got queued, so we need take no new lock here.
+ * event got queued, so we need take no new lock here. Also, we need not
+ * recheck the relkind, so no need for CheckValidResultRel.
*/
rel = heap_open(relid, NoLock);
/*
- * Make the new entry in the right context. Currently, we don't need any
- * index information in ResultRelInfos used only for triggers, so tell
- * InitResultRelInfo it's a DELETE.
+ * Make the new entry in the right context.
*/
oldcontext = MemoryContextSwitchTo(estate->es_query_cxt);
rInfo = makeNode(ResultRelInfo);
InitResultRelInfo(rInfo,
rel,
0, /* dummy rangetable index */
- CMD_DELETE,
estate->es_instrument);
estate->es_trig_target_relations =
lappend(estate->es_trig_target_relations, rInfo);
MemoryContextSwitchTo(oldcontext);
+ /*
+ * Currently, we don't need any index information in ResultRelInfos used
+ * only for triggers, so no need to call ExecOpenIndices.
+ */
+
return rInfo;
}
/*
* ExecContextForcesOids
*
- * This is pretty grotty: when doing INSERT, UPDATE, or SELECT INTO,
+ * This is pretty grotty: when doing INSERT, UPDATE, or CREATE TABLE AS,
* we need to ensure that result tuples have space for an OID iff they are
* going to be stored into a relation that has OIDs. In other contexts
* we are free to choose whether to leave space for OIDs in result tuples
* the ModifyTable node, so ModifyTable has to set es_result_relation_info
* while initializing each subplan.
*
- * SELECT INTO is even uglier, because we don't have the INTO relation's
- * descriptor available when this code runs; we have to look aside at a
- * flag set by InitPlan().
+ * CREATE TABLE AS is even uglier, because we don't have the target relation's
+ * descriptor available when this code runs; we have to look aside at the
+ * flags passed to ExecutorStart().
*/
bool
ExecContextForcesOids(PlanState *planstate, bool *hasoids)
}
}
- if (planstate->state->es_select_into)
+ if (planstate->state->es_top_eflags & EXEC_FLAG_WITH_OIDS)
{
- *hasoids = planstate->state->es_into_oids;
+ *hasoids = true;
+ return true;
+ }
+ if (planstate->state->es_top_eflags & EXEC_FLAG_WITHOUT_OIDS)
+ {
+ *hasoids = false;
return true;
}
return false;
}
+/* ----------------------------------------------------------------
+ * ExecPostprocessPlan
+ *
+ * Give plan nodes a final chance to execute before shutdown
+ * ----------------------------------------------------------------
+ */
+static void
+ExecPostprocessPlan(EState *estate)
+{
+ ListCell *lc;
+
+ /*
+ * Make sure nodes run forward.
+ */
+ estate->es_direction = ForwardScanDirection;
+
+ /*
+ * Run any secondary ModifyTable nodes to completion, in case the main
+ * query did not fetch all rows from them. (We do this to ensure that
+ * such nodes have predictable results.)
+ */
+ foreach(lc, estate->es_auxmodifytables)
+ {
+ PlanState *ps = (PlanState *) lfirst(lc);
+
+ for (;;)
+ {
+ TupleTableSlot *slot;
+
+ /* Reset the per-output-tuple exprcontext each time */
+ ResetPerTupleExprContext(estate);
+
+ slot = ExecProcNode(ps);
+
+ if (TupIsNull(slot))
+ break;
+ }
+ }
+}
+
/* ----------------------------------------------------------------
* ExecEndPlan
*
}
/*
- * close any relations selected FOR UPDATE/FOR SHARE, again keeping locks
+ * close any relations selected FOR [KEY] UPDATE/SHARE, again keeping
+ * locks
*/
foreach(l, estate->es_rowMarks)
{
/* ----------------------------------------------------------------
* ExecutePlan
*
- * Processes the query plan until we have processed 'numberTuples' tuples,
+ * Processes the query plan until we have retrieved 'numberTuples' tuples,
* moving in the specified direction.
*
* Runs to completion if numberTuples is 0
/*
* ExecRelCheck --- check that tuple meets constraints for result relation
+ *
+ * Returns NULL if OK, else name of failed check constraint
*/
static const char *
ExecRelCheck(ResultRelInfo *resultRelInfo,
qual = resultRelInfo->ri_ConstraintExprs[i];
/*
- * NOTE: SQL92 specifies that a NULL result from a constraint
- * expression is not to be treated as a failure. Therefore, tell
- * ExecQual to return TRUE for NULL.
+ * NOTE: SQL specifies that a NULL result from a constraint expression
+ * is not to be treated as a failure. Therefore, tell ExecQual to
+ * return TRUE for NULL.
*/
if (!ExecQual(qual, econtext, true))
return check[i].ccname;
TupleTableSlot *slot, EState *estate)
{
Relation rel = resultRelInfo->ri_RelationDesc;
- TupleConstr *constr = rel->rd_att->constr;
+ TupleDesc tupdesc = RelationGetDescr(rel);
+ TupleConstr *constr = tupdesc->constr;
Assert(constr);
if (constr->has_not_null)
{
- int natts = rel->rd_att->natts;
+ int natts = tupdesc->natts;
int attrChk;
for (attrChk = 1; attrChk <= natts; attrChk++)
{
- if (rel->rd_att->attrs[attrChk - 1]->attnotnull &&
+ if (tupdesc->attrs[attrChk - 1]->attnotnull &&
slot_attisnull(slot, attrChk))
+ {
+ char *val_desc;
+ Bitmapset *modifiedCols;
+
+ modifiedCols = GetModifiedColumns(resultRelInfo, estate);
+ val_desc = ExecBuildSlotValueDescription(RelationGetRelid(rel),
+ slot,
+ tupdesc,
+ modifiedCols,
+ 64);
+
ereport(ERROR,
(errcode(ERRCODE_NOT_NULL_VIOLATION),
errmsg("null value in column \"%s\" violates not-null constraint",
- NameStr(rel->rd_att->attrs[attrChk - 1]->attname))));
+ NameStr(tupdesc->attrs[attrChk - 1]->attname)),
+ val_desc ? errdetail("Failing row contains %s.", val_desc) : 0,
+ errtablecol(rel, attrChk)));
+ }
}
}
const char *failed;
if ((failed = ExecRelCheck(resultRelInfo, slot, estate)) != NULL)
+ {
+ char *val_desc;
+ Bitmapset *modifiedCols;
+
+ modifiedCols = GetModifiedColumns(resultRelInfo, estate);
+ val_desc = ExecBuildSlotValueDescription(RelationGetRelid(rel),
+ slot,
+ tupdesc,
+ modifiedCols,
+ 64);
ereport(ERROR,
(errcode(ERRCODE_CHECK_VIOLATION),
errmsg("new row for relation \"%s\" violates check constraint \"%s\"",
- RelationGetRelationName(rel), failed)));
+ RelationGetRelationName(rel), failed),
+ val_desc ? errdetail("Failing row contains %s.", val_desc) : 0,
+ errtableconstraint(rel, failed)));
+ }
}
}
+/*
+ * ExecWithCheckOptions -- check that tuple satisfies any WITH CHECK OPTIONs
+ */
+void
+ExecWithCheckOptions(ResultRelInfo *resultRelInfo,
+ TupleTableSlot *slot, EState *estate)
+{
+ Relation rel = resultRelInfo->ri_RelationDesc;
+ TupleDesc tupdesc = RelationGetDescr(rel);
+ ExprContext *econtext;
+ ListCell *l1,
+ *l2;
+
+ /*
+ * We will use the EState's per-tuple context for evaluating constraint
+ * expressions (creating it if it's not already there).
+ */
+ econtext = GetPerTupleExprContext(estate);
+
+ /* Arrange for econtext's scan tuple to be the tuple under test */
+ econtext->ecxt_scantuple = slot;
+
+ /* Check each of the constraints */
+ forboth(l1, resultRelInfo->ri_WithCheckOptions,
+ l2, resultRelInfo->ri_WithCheckOptionExprs)
+ {
+ WithCheckOption *wco = (WithCheckOption *) lfirst(l1);
+ ExprState *wcoExpr = (ExprState *) lfirst(l2);
+
+ /*
+ * WITH CHECK OPTION checks are intended to ensure that the new tuple
+ * is visible (in the case of a view) or that it passes the
+ * 'with-check' policy (in the case of row security).
+ * If the qual evaluates to NULL or FALSE, then the new tuple won't be
+ * included in the view or doesn't pass the 'with-check' policy for the
+ * table. We need ExecQual to return FALSE for NULL to handle the view
+ * case (the opposite of what we do above for CHECK constraints).
+ */
+ if (!ExecQual((List *) wcoExpr, econtext, false))
+ {
+ char *val_desc;
+ Bitmapset *modifiedCols;
+
+ modifiedCols = GetModifiedColumns(resultRelInfo, estate);
+ val_desc = ExecBuildSlotValueDescription(RelationGetRelid(rel),
+ slot,
+ tupdesc,
+ modifiedCols,
+ 64);
+
+ ereport(ERROR,
+ (errcode(ERRCODE_WITH_CHECK_OPTION_VIOLATION),
+ errmsg("new row violates WITH CHECK OPTION for \"%s\"",
+ wco->viewname),
+ val_desc ? errdetail("Failing row contains %s.", val_desc) :
+ 0));
+ }
+ }
+}
+
+/*
+ * ExecBuildSlotValueDescription -- construct a string representing a tuple
+ *
+ * This is intentionally very similar to BuildIndexValueDescription, but
+ * unlike that function, we truncate long field values (to at most maxfieldlen
+ * bytes). That seems necessary here since heap field values could be very
+ * long, whereas index entries typically aren't so wide.
+ *
+ * Also, unlike the case with index entries, we need to be prepared to ignore
+ * dropped columns. We used to use the slot's tuple descriptor to decode the
+ * data, but the slot's descriptor doesn't identify dropped columns, so we
+ * now need to be passed the relation's descriptor.
+ *
+ * Note that, like BuildIndexValueDescription, if the user does not have
+ * permission to view any of the columns involved, a NULL is returned. Unlike
+ * BuildIndexValueDescription, if the user has access to view a subset of the
+ * column involved, that subset will be returned with a key identifying which
+ * columns they are.
+ */
+static char *
+ExecBuildSlotValueDescription(Oid reloid,
+ TupleTableSlot *slot,
+ TupleDesc tupdesc,
+ Bitmapset *modifiedCols,
+ int maxfieldlen)
+{
+ StringInfoData buf;
+ StringInfoData collist;
+ bool write_comma = false;
+ bool write_comma_collist = false;
+ int i;
+ AclResult aclresult;
+ bool table_perm = false;
+ bool any_perm = false;
+
+ /*
+ * Check if RLS is enabled and should be active for the relation; if so,
+ * then don't return anything. Otherwise, go through normal permission
+ * checks.
+ */
+ if (check_enable_rls(reloid, GetUserId(), true) == RLS_ENABLED)
+ return NULL;
+
+ initStringInfo(&buf);
+
+ appendStringInfoChar(&buf, '(');
+
+ /*
+ * Check if the user has permissions to see the row. Table-level SELECT
+ * allows access to all columns. If the user does not have table-level
+ * SELECT then we check each column and include those the user has SELECT
+ * rights on. Additionally, we always include columns the user provided
+ * data for.
+ */
+ aclresult = pg_class_aclcheck(reloid, GetUserId(), ACL_SELECT);
+ if (aclresult != ACLCHECK_OK)
+ {
+ /* Set up the buffer for the column list */
+ initStringInfo(&collist);
+ appendStringInfoChar(&collist, '(');
+ }
+ else
+ table_perm = any_perm = true;
+
+ /* Make sure the tuple is fully deconstructed */
+ slot_getallattrs(slot);
+
+ for (i = 0; i < tupdesc->natts; i++)
+ {
+ bool column_perm = false;
+ char *val;
+ int vallen;
+
+ /* ignore dropped columns */
+ if (tupdesc->attrs[i]->attisdropped)
+ continue;
+
+ if (!table_perm)
+ {
+ /*
+ * No table-level SELECT, so need to make sure they either have
+ * SELECT rights on the column or that they have provided the
+ * data for the column. If not, omit this column from the error
+ * message.
+ */
+ aclresult = pg_attribute_aclcheck(reloid, tupdesc->attrs[i]->attnum,
+ GetUserId(), ACL_SELECT);
+ if (bms_is_member(tupdesc->attrs[i]->attnum - FirstLowInvalidHeapAttributeNumber,
+ modifiedCols) || aclresult == ACLCHECK_OK)
+ {
+ column_perm = any_perm = true;
+
+ if (write_comma_collist)
+ appendStringInfoString(&collist, ", ");
+ else
+ write_comma_collist = true;
+
+ appendStringInfoString(&collist, NameStr(tupdesc->attrs[i]->attname));
+ }
+ }
+
+ if (table_perm || column_perm)
+ {
+ if (slot->tts_isnull[i])
+ val = "null";
+ else
+ {
+ Oid foutoid;
+ bool typisvarlena;
+
+ getTypeOutputInfo(tupdesc->attrs[i]->atttypid,
+ &foutoid, &typisvarlena);
+ val = OidOutputFunctionCall(foutoid, slot->tts_values[i]);
+ }
+
+ if (write_comma)
+ appendStringInfoString(&buf, ", ");
+ else
+ write_comma = true;
+
+ /* truncate if needed */
+ vallen = strlen(val);
+ if (vallen <= maxfieldlen)
+ appendStringInfoString(&buf, val);
+ else
+ {
+ vallen = pg_mbcliplen(val, vallen, maxfieldlen);
+ appendBinaryStringInfo(&buf, val, vallen);
+ appendStringInfoString(&buf, "...");
+ }
+ }
+ }
+
+ /* If we end up with zero columns being returned, then return NULL. */
+ if (!any_perm)
+ return NULL;
+
+ appendStringInfoChar(&buf, ')');
+
+ if (!table_perm)
+ {
+ appendStringInfoString(&collist, ") = ");
+ appendStringInfoString(&collist, buf.data);
+
+ return collist.data;
+ }
+
+ return buf.data;
+}
+
+
+/*
+ * ExecFindRowMark -- find the ExecRowMark struct for given rangetable index
+ */
+ExecRowMark *
+ExecFindRowMark(EState *estate, Index rti)
+{
+ ListCell *lc;
+
+ foreach(lc, estate->es_rowMarks)
+ {
+ ExecRowMark *erm = (ExecRowMark *) lfirst(lc);
+
+ if (erm->rti == rti)
+ return erm;
+ }
+ elog(ERROR, "failed to find ExecRowMark for rangetable index %u", rti);
+ return NULL; /* keep compiler quiet */
+}
+
+/*
+ * ExecBuildAuxRowMark -- create an ExecAuxRowMark struct
+ *
+ * Inputs are the underlying ExecRowMark struct and the targetlist of the
+ * input plan node (not planstate node!). We need the latter to find out
+ * the column numbers of the resjunk columns.
+ */
+ExecAuxRowMark *
+ExecBuildAuxRowMark(ExecRowMark *erm, List *targetlist)
+{
+ ExecAuxRowMark *aerm = (ExecAuxRowMark *) palloc0(sizeof(ExecAuxRowMark));
+ char resname[32];
+
+ aerm->rowmark = erm;
+
+ /* Look up the resjunk columns associated with this rowmark */
+ if (erm->relation)
+ {
+ Assert(erm->markType != ROW_MARK_COPY);
+
+ /* if child rel, need tableoid */
+ if (erm->rti != erm->prti)
+ {
+ snprintf(resname, sizeof(resname), "tableoid%u", erm->rowmarkId);
+ aerm->toidAttNo = ExecFindJunkAttributeInTlist(targetlist,
+ resname);
+ if (!AttributeNumberIsValid(aerm->toidAttNo))
+ elog(ERROR, "could not find junk %s column", resname);
+ }
+
+ /* always need ctid for real relations */
+ snprintf(resname, sizeof(resname), "ctid%u", erm->rowmarkId);
+ aerm->ctidAttNo = ExecFindJunkAttributeInTlist(targetlist,
+ resname);
+ if (!AttributeNumberIsValid(aerm->ctidAttNo))
+ elog(ERROR, "could not find junk %s column", resname);
+ }
+ else
+ {
+ Assert(erm->markType == ROW_MARK_COPY);
+
+ snprintf(resname, sizeof(resname), "wholerow%u", erm->rowmarkId);
+ aerm->wholeAttNo = ExecFindJunkAttributeInTlist(targetlist,
+ resname);
+ if (!AttributeNumberIsValid(aerm->wholeAttNo))
+ elog(ERROR, "could not find junk %s column", resname);
+ }
+
+ return aerm;
+}
+
/*
* EvalPlanQual logic --- recheck modified tuple(s) to see if we want to
* epqstate - state for EvalPlanQual rechecking
* relation - table containing tuple
* rti - rangetable index of table containing tuple
+ * lockmode - requested tuple lock mode
* *tid - t_ctid from the outdated tuple (ie, next updated version)
* priorXmax - t_xmax from the outdated tuple
*
*
* Returns a slot containing the new candidate update/delete tuple, or
* NULL if we determine we shouldn't process the row.
+ *
+ * Note: properly, lockmode should be declared as enum LockTupleMode,
+ * but we use "int" to avoid having to include heapam.h in executor.h.
*/
TupleTableSlot *
EvalPlanQual(EState *estate, EPQState *epqstate,
- Relation relation, Index rti,
+ Relation relation, Index rti, int lockmode,
ItemPointer tid, TransactionId priorXmax)
{
TupleTableSlot *slot;
/*
* Get and lock the updated version of the row; if fail, return NULL.
*/
- copyTuple = EvalPlanQualFetch(estate, relation, LockTupleExclusive,
+ copyTuple = EvalPlanQualFetch(estate, relation, lockmode, LockWaitBlock,
tid, priorXmax);
if (copyTuple == NULL)
*tid = copyTuple->t_self;
/*
- * Need to run a recheck subquery. Initialize or reinitialize EPQ state.
+ * Need to run a recheck subquery. Initialize or reinitialize EPQ state.
*/
EvalPlanQualBegin(epqstate, estate);
* estate - executor state data
* relation - table containing tuple
* lockmode - requested tuple lock mode
+ * wait_policy - requested lock wait policy
* *tid - t_ctid from the outdated tuple (ie, next updated version)
* priorXmax - t_xmax from the outdated tuple
*
* Returns a palloc'd copy of the newest tuple version, or NULL if we find
* that there is no newest version (ie, the row was deleted not updated).
+ * We also return NULL if the tuple is locked and the wait policy is to skip
+ * such tuples.
+ *
* If successful, we have locked the newest tuple version, so caller does not
* need to worry about it changing anymore.
*
*/
HeapTuple
EvalPlanQualFetch(EState *estate, Relation relation, int lockmode,
+ LockWaitPolicy wait_policy,
ItemPointer tid, TransactionId priorXmax)
{
HeapTuple copyTuple = NULL;
if (heap_fetch(relation, &SnapshotDirty, &tuple, &buffer, true, NULL))
{
HTSU_Result test;
- ItemPointerData update_ctid;
- TransactionId update_xmax;
+ HeapUpdateFailureData hufd;
/*
* If xmin isn't what we're expecting, the slot must have been
- * recycled and reused for an unrelated tuple. This implies that
+ * recycled and reused for an unrelated tuple. This implies that
* the latest version of the row was deleted, so we need do
* nothing. (Should be safe to examine xmin without getting
* buffer's content lock, since xmin never changes in an existing
/*
* If tuple is being updated by other transaction then we have to
- * wait for its commit/abort.
+ * wait for its commit/abort, or die trying.
*/
if (TransactionIdIsValid(SnapshotDirty.xmax))
{
ReleaseBuffer(buffer);
- XactLockTableWait(SnapshotDirty.xmax);
+ switch (wait_policy)
+ {
+ case LockWaitBlock:
+ XactLockTableWait(SnapshotDirty.xmax,
+ relation, &tuple.t_self,
+ XLTW_FetchUpdated);
+ break;
+ case LockWaitSkip:
+ if (!ConditionalXactLockTableWait(SnapshotDirty.xmax))
+ return NULL; /* skip instead of waiting */
+ break;
+ case LockWaitError:
+ if (!ConditionalXactLockTableWait(SnapshotDirty.xmax))
+ ereport(ERROR,
+ (errcode(ERRCODE_LOCK_NOT_AVAILABLE),
+ errmsg("could not obtain lock on row in relation \"%s\"",
+ RelationGetRelationName(relation))));
+ break;
+ }
continue; /* loop back to repeat heap_fetch */
}
/*
* If tuple was inserted by our own transaction, we have to check
* cmin against es_output_cid: cmin >= current CID means our
- * command cannot see the tuple, so we should ignore it. Without
- * this we are open to the "Halloween problem" of indefinitely
- * re-updating the same tuple. (We need not check cmax because
- * HeapTupleSatisfiesDirty will consider a tuple deleted by our
- * transaction dead, regardless of cmax.) We just checked that
- * priorXmax == xmin, so we can test that variable instead of
+ * command cannot see the tuple, so we should ignore it. Otherwise
+ * heap_lock_tuple() will throw an error, and so would any later
+ * attempt to update or delete the tuple. (We need not check cmax
+ * because HeapTupleSatisfiesDirty will consider a tuple deleted
+ * by our transaction dead, regardless of cmax.) We just checked
+ * that priorXmax == xmin, so we can test that variable instead of
* doing HeapTupleHeaderGetXmin again.
*/
if (TransactionIdIsCurrentTransactionId(priorXmax) &&
/*
* This is a live tuple, so now try to lock it.
*/
- test = heap_lock_tuple(relation, &tuple, &buffer,
- &update_ctid, &update_xmax,
+ test = heap_lock_tuple(relation, &tuple,
estate->es_output_cid,
- lockmode, false);
+ lockmode, wait_policy,
+ false, &buffer, &hufd);
/* We now have two pins on the buffer, get rid of one */
ReleaseBuffer(buffer);
switch (test)
{
case HeapTupleSelfUpdated:
- /* treat it as deleted; do not process */
+
+ /*
+ * The target tuple was already updated or deleted by the
+ * current command, or by a later command in the current
+ * transaction. We *must* ignore the tuple in the former
+ * case, so as to avoid the "Halloween problem" of
+ * repeated update attempts. In the latter case it might
+ * be sensible to fetch the updated tuple instead, but
+ * doing so would require changing heap_lock_tuple as well
+ * as heap_update and heap_delete to not complain about
+ * updating "invisible" tuples, which seems pretty scary.
+ * So for now, treat the tuple as deleted and do not
+ * process.
+ */
ReleaseBuffer(buffer);
return NULL;
ereport(ERROR,
(errcode(ERRCODE_T_R_SERIALIZATION_FAILURE),
errmsg("could not serialize access due to concurrent update")));
- if (!ItemPointerEquals(&update_ctid, &tuple.t_self))
+ if (!ItemPointerEquals(&hufd.ctid, &tuple.t_self))
{
/* it was updated, so look at the updated version */
- tuple.t_self = update_ctid;
+ tuple.t_self = hufd.ctid;
/* updated row should have xmin matching this xmax */
- priorXmax = update_xmax;
+ priorXmax = hufd.xmax;
continue;
}
/* tuple was deleted, so give up */
return NULL;
+ case HeapTupleWouldBlock:
+ ReleaseBuffer(buffer);
+ return NULL;
+
default:
ReleaseBuffer(buffer);
elog(ERROR, "unrecognized heap_lock_tuple status: %u",
/* updated, so look at the updated row */
tuple.t_self = tuple.t_data->t_ctid;
/* updated row should have xmin matching this xmax */
- priorXmax = HeapTupleHeaderGetXmax(tuple.t_data);
+ priorXmax = HeapTupleHeaderGetUpdateXid(tuple.t_data);
ReleaseBuffer(buffer);
/* loop back to fetch next in chain */
}
/*
* EvalPlanQualInit -- initialize during creation of a plan state node
* that might need to invoke EPQ processing.
- * Note: subplan can be NULL if it will be set later with EvalPlanQualSetPlan.
+ *
+ * Note: subplan/auxrowmarks can be NULL/NIL if they will be set later
+ * with EvalPlanQualSetPlan.
*/
void
EvalPlanQualInit(EPQState *epqstate, EState *estate,
- Plan *subplan, int epqParam)
+ Plan *subplan, List *auxrowmarks, int epqParam)
{
/* Mark the EPQ state inactive */
epqstate->estate = NULL;
epqstate->origslot = NULL;
/* ... and remember data that EvalPlanQualBegin will need */
epqstate->plan = subplan;
- epqstate->rowMarks = NIL;
+ epqstate->arowMarks = auxrowmarks;
epqstate->epqParam = epqParam;
}
/*
* EvalPlanQualSetPlan -- set or change subplan of an EPQState.
*
- * We need this so that ModifyTuple can deal with multiple subplans.
+ * We need this so that ModifyTable can deal with multiple subplans.
*/
void
-EvalPlanQualSetPlan(EPQState *epqstate, Plan *subplan)
+EvalPlanQualSetPlan(EPQState *epqstate, Plan *subplan, List *auxrowmarks)
{
/* If we have a live EPQ query, shut it down */
EvalPlanQualEnd(epqstate);
/* And set/change the plan pointer */
epqstate->plan = subplan;
-}
-
-/*
- * EvalPlanQualAddRowMark -- add an ExecRowMark that EPQ needs to handle.
- *
- * Currently, only non-locking RowMarks are supported.
- */
-void
-EvalPlanQualAddRowMark(EPQState *epqstate, ExecRowMark *erm)
-{
- if (RowMarkRequiresRowShareLock(erm->markType))
- elog(ERROR, "EvalPlanQual doesn't support locking rowmarks");
- epqstate->rowMarks = lappend(epqstate->rowMarks, erm);
+ /* The rowmarks depend on the plan, too */
+ epqstate->arowMarks = auxrowmarks;
}
/*
/*
* Fetch the current row values for any non-locked relations that need
- * to be scanned by an EvalPlanQual operation. origslot must have been set
+ * to be scanned by an EvalPlanQual operation. origslot must have been set
* to contain the current result row (top-level row) that we need to recheck.
*/
void
Assert(epqstate->origslot != NULL);
- foreach(l, epqstate->rowMarks)
+ foreach(l, epqstate->arowMarks)
{
- ExecRowMark *erm = (ExecRowMark *) lfirst(l);
+ ExecAuxRowMark *aerm = (ExecAuxRowMark *) lfirst(l);
+ ExecRowMark *erm = aerm->rowmark;
Datum datum;
bool isNull;
HeapTupleData tuple;
+ if (RowMarkRequiresRowShareLock(erm->markType))
+ elog(ERROR, "EvalPlanQual doesn't support locking rowmarks");
+
/* clear any leftover test tuple for this rel */
EvalPlanQualSetTuple(epqstate, erm->rti, NULL);
Oid tableoid;
datum = ExecGetJunkAttribute(epqstate->origslot,
- erm->toidAttNo,
+ aerm->toidAttNo,
&isNull);
/* non-locked rels could be on the inside of outer joins */
if (isNull)
/* fetch the tuple's ctid */
datum = ExecGetJunkAttribute(epqstate->origslot,
- erm->ctidAttNo,
+ aerm->ctidAttNo,
&isNull);
/* non-locked rels could be on the inside of outer joins */
if (isNull)
/* fetch the whole-row Var for the relation */
datum = ExecGetJunkAttribute(epqstate->origslot,
- erm->wholeAttNo,
+ aerm->wholeAttNo,
&isNull);
/* non-locked rels could be on the inside of outer joins */
if (isNull)
/* build a temporary HeapTuple control structure */
tuple.t_len = HeapTupleHeaderGetDatumLength(td);
ItemPointerSetInvalid(&(tuple.t_self));
- tuple.t_tableOid = InvalidOid;
+ /* relation might be a foreign table, if so provide tableoid */
+ tuple.t_tableOid = getrelid(erm->rti,
+ epqstate->estate->es_range_table);
tuple.t_data = td;
/* copy and store tuple */
* the snapshot, rangetable, result-rel info, and external Param info.
* They need their own copies of local state, including a tuple table,
* es_param_exec_vals, etc.
+ *
+ * The ResultRelInfo array management is trickier than it looks. We
+ * create a fresh array for the child but copy all the content from the
+ * parent. This is because it's okay for the child to share any
+ * per-relation state the parent has already created --- but if the child
+ * sets up any ResultRelInfo fields, such as its own junkfilter, that
+ * state must *not* propagate back to the parent. (For one thing, the
+ * pointed-to data is in a memory context that won't last long enough.)
*/
estate->es_direction = ForwardScanDirection;
estate->es_snapshot = parentestate->es_snapshot;
estate->es_plannedstmt = parentestate->es_plannedstmt;
estate->es_junkFilter = parentestate->es_junkFilter;
estate->es_output_cid = parentestate->es_output_cid;
- estate->es_result_relations = parentestate->es_result_relations;
- estate->es_num_result_relations = parentestate->es_num_result_relations;
- estate->es_result_relation_info = parentestate->es_result_relation_info;
+ if (parentestate->es_num_result_relations > 0)
+ {
+ int numResultRelations = parentestate->es_num_result_relations;
+ ResultRelInfo *resultRelInfos;
+
+ resultRelInfos = (ResultRelInfo *)
+ palloc(numResultRelations * sizeof(ResultRelInfo));
+ memcpy(resultRelInfos, parentestate->es_result_relations,
+ numResultRelations * sizeof(ResultRelInfo));
+ estate->es_result_relations = resultRelInfos;
+ estate->es_num_result_relations = numResultRelations;
+ }
+ /* es_result_relation_info must NOT be copied */
/* es_trig_target_relations must NOT be copied */
estate->es_rowMarks = parentestate->es_rowMarks;
+ estate->es_top_eflags = parentestate->es_top_eflags;
estate->es_instrument = parentestate->es_instrument;
- estate->es_select_into = parentestate->es_select_into;
- estate->es_into_oids = parentestate->es_into_oids;
+ /* es_auxmodifytables must NOT be copied */
/*
* The external param list is simply shared from parent. The internal
/*
* Each EState must have its own es_epqScanDone state, but if we have
- * nested EPQ checks they should share es_epqTuple arrays. This allows
+ * nested EPQ checks they should share es_epqTuple arrays. This allows
* sub-rechecks to inherit the values being examined by an outer recheck.
*/
estate->es_epqScanDone = (bool *) palloc0(rtsize * sizeof(bool));
PlanState *subplanstate;
subplanstate = ExecInitNode(subplan, estate, 0);
-
estate->es_subplanstates = lappend(estate->es_subplanstates,
subplanstate);
}
*
* This is a cut-down version of ExecutorEnd(); basically we want to do most
* of the normal cleanup, but *not* close result relations (which we are
- * just sharing from the outer query). We do, however, have to close any
+ * just sharing from the outer query). We do, however, have to close any
* trigger target relations that got opened, since those are not shared.
* (There probably shouldn't be any of the latter, but just in case...)
*/
epqstate->planstate = NULL;
epqstate->origslot = NULL;
}
-
-
-/*
- * Support for SELECT INTO (a/k/a CREATE TABLE AS)
- *
- * We implement SELECT INTO by diverting SELECT's normal output with
- * a specialized DestReceiver type.
- */
-
-typedef struct
-{
- DestReceiver pub; /* publicly-known function pointers */
- EState *estate; /* EState we are working with */
- Relation rel; /* Relation to write to */
- int hi_options; /* heap_insert performance options */
- BulkInsertState bistate; /* bulk insert state */
-} DR_intorel;
-
-/*
- * OpenIntoRel --- actually create the SELECT INTO target relation
- *
- * This also replaces QueryDesc->dest with the special DestReceiver for
- * SELECT INTO. We assume that the correct result tuple type has already
- * been placed in queryDesc->tupDesc.
- */
-static void
-OpenIntoRel(QueryDesc *queryDesc)
-{
- IntoClause *into = queryDesc->plannedstmt->intoClause;
- EState *estate = queryDesc->estate;
- Relation intoRelationDesc;
- char *intoName;
- Oid namespaceId;
- Oid tablespaceId;
- Datum reloptions;
- AclResult aclresult;
- Oid intoRelationId;
- TupleDesc tupdesc;
- DR_intorel *myState;
- static char *validnsps[] = HEAP_RELOPT_NAMESPACES;
-
- Assert(into);
-
- /*
- * XXX This code needs to be kept in sync with DefineRelation(). Maybe we
- * should try to use that function instead.
- */
-
- /*
- * Check consistency of arguments
- */
- if (into->onCommit != ONCOMMIT_NOOP && !into->rel->istemp)
- ereport(ERROR,
- (errcode(ERRCODE_INVALID_TABLE_DEFINITION),
- errmsg("ON COMMIT can only be used on temporary tables")));
-
- /*
- * Security check: disallow creating temp tables from security-restricted
- * code. This is needed because calling code might not expect untrusted
- * tables to appear in pg_temp at the front of its search path.
- */
- if (into->rel->istemp && InSecurityRestrictedOperation())
- ereport(ERROR,
- (errcode(ERRCODE_INSUFFICIENT_PRIVILEGE),
- errmsg("cannot create temporary table within security-restricted operation")));
-
- /*
- * Find namespace to create in, check its permissions
- */
- intoName = into->rel->relname;
- namespaceId = RangeVarGetCreationNamespace(into->rel);
-
- aclresult = pg_namespace_aclcheck(namespaceId, GetUserId(),
- ACL_CREATE);
- if (aclresult != ACLCHECK_OK)
- aclcheck_error(aclresult, ACL_KIND_NAMESPACE,
- get_namespace_name(namespaceId));
-
- /*
- * Select tablespace to use. If not specified, use default tablespace
- * (which may in turn default to database's default).
- */
- if (into->tableSpaceName)
- {
- tablespaceId = get_tablespace_oid(into->tableSpaceName, false);
- }
- else
- {
- tablespaceId = GetDefaultTablespace(into->rel->istemp);
- /* note InvalidOid is OK in this case */
- }
-
- /* Check permissions except when using the database's default space */
- if (OidIsValid(tablespaceId) && tablespaceId != MyDatabaseTableSpace)
- {
- AclResult aclresult;
-
- aclresult = pg_tablespace_aclcheck(tablespaceId, GetUserId(),
- ACL_CREATE);
-
- if (aclresult != ACLCHECK_OK)
- aclcheck_error(aclresult, ACL_KIND_TABLESPACE,
- get_tablespace_name(tablespaceId));
- }
-
- /* Parse and validate any reloptions */
- reloptions = transformRelOptions((Datum) 0,
- into->options,
- NULL,
- validnsps,
- true,
- false);
- (void) heap_reloptions(RELKIND_RELATION, reloptions, true);
-
- /* Copy the tupdesc because heap_create_with_catalog modifies it */
- tupdesc = CreateTupleDescCopy(queryDesc->tupDesc);
-
- /* Now we can actually create the new relation */
- intoRelationId = heap_create_with_catalog(intoName,
- namespaceId,
- tablespaceId,
- InvalidOid,
- InvalidOid,
- InvalidOid,
- GetUserId(),
- tupdesc,
- NIL,
- RELKIND_RELATION,
- false,
- false,
- true,
- 0,
- into->onCommit,
- reloptions,
- true,
- allowSystemTableMods,
- false);
- Assert(intoRelationId != InvalidOid);
-
- FreeTupleDesc(tupdesc);
-
- /*
- * Advance command counter so that the newly-created relation's catalog
- * tuples will be visible to heap_open.
- */
- CommandCounterIncrement();
-
- /*
- * If necessary, create a TOAST table for the INTO relation. Note that
- * AlterTableCreateToastTable ends with CommandCounterIncrement(), so that
- * the TOAST table will be visible for insertion.
- */
- reloptions = transformRelOptions((Datum) 0,
- into->options,
- "toast",
- validnsps,
- true,
- false);
-
- (void) heap_reloptions(RELKIND_TOASTVALUE, reloptions, true);
-
- AlterTableCreateToastTable(intoRelationId, reloptions);
-
- /*
- * And open the constructed table for writing.
- */
- intoRelationDesc = heap_open(intoRelationId, AccessExclusiveLock);
-
- /*
- * Now replace the query's DestReceiver with one for SELECT INTO
- */
- queryDesc->dest = CreateDestReceiver(DestIntoRel);
- myState = (DR_intorel *) queryDesc->dest;
- Assert(myState->pub.mydest == DestIntoRel);
- myState->estate = estate;
- myState->rel = intoRelationDesc;
-
- /*
- * We can skip WAL-logging the insertions, unless PITR or streaming
- * replication is in use. We can skip the FSM in any case.
- */
- myState->hi_options = HEAP_INSERT_SKIP_FSM |
- (XLogIsNeeded() ? 0 : HEAP_INSERT_SKIP_WAL);
- myState->bistate = GetBulkInsertState();
-
- /* Not using WAL requires smgr_targblock be initially invalid */
- Assert(RelationGetTargetBlock(intoRelationDesc) == InvalidBlockNumber);
-}
-
-/*
- * CloseIntoRel --- clean up SELECT INTO at ExecutorEnd time
- */
-static void
-CloseIntoRel(QueryDesc *queryDesc)
-{
- DR_intorel *myState = (DR_intorel *) queryDesc->dest;
-
- /* OpenIntoRel might never have gotten called */
- if (myState && myState->pub.mydest == DestIntoRel && myState->rel)
- {
- FreeBulkInsertState(myState->bistate);
-
- /* If we skipped using WAL, must heap_sync before commit */
- if (myState->hi_options & HEAP_INSERT_SKIP_WAL)
- heap_sync(myState->rel);
-
- /* close rel, but keep lock until commit */
- heap_close(myState->rel, NoLock);
-
- myState->rel = NULL;
- }
-}
-
-/*
- * CreateIntoRelDestReceiver -- create a suitable DestReceiver object
- */
-DestReceiver *
-CreateIntoRelDestReceiver(void)
-{
- DR_intorel *self = (DR_intorel *) palloc0(sizeof(DR_intorel));
-
- self->pub.receiveSlot = intorel_receive;
- self->pub.rStartup = intorel_startup;
- self->pub.rShutdown = intorel_shutdown;
- self->pub.rDestroy = intorel_destroy;
- self->pub.mydest = DestIntoRel;
-
- /* private fields will be set by OpenIntoRel */
-
- return (DestReceiver *) self;
-}
-
-/*
- * intorel_startup --- executor startup
- */
-static void
-intorel_startup(DestReceiver *self, int operation, TupleDesc typeinfo)
-{
- /* no-op */
-}
-
-/*
- * intorel_receive --- receive one tuple
- */
-static void
-intorel_receive(TupleTableSlot *slot, DestReceiver *self)
-{
- DR_intorel *myState = (DR_intorel *) self;
- HeapTuple tuple;
-
- /*
- * get the heap tuple out of the tuple table slot, making sure we have a
- * writable copy
- */
- tuple = ExecMaterializeSlot(slot);
-
- /*
- * force assignment of new OID (see comments in ExecInsert)
- */
- if (myState->rel->rd_rel->relhasoids)
- HeapTupleSetOid(tuple, InvalidOid);
-
- heap_insert(myState->rel,
- tuple,
- myState->estate->es_output_cid,
- myState->hi_options,
- myState->bistate);
-
- /* We know this is a newly created relation, so there are no indexes */
-}
-
-/*
- * intorel_shutdown --- executor end
- */
-static void
-intorel_shutdown(DestReceiver *self)
-{
- /* no-op */
-}
-
-/*
- * intorel_destroy --- release DestReceiver object
- */
-static void
-intorel_destroy(DestReceiver *self)
-{
- pfree(self);
-}