* nbtutils.c
* Utility code for Postgres btree implementation.
*
- * Portions Copyright (c) 1996-2003, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1996-2018, PostgreSQL Global Development Group
* Portions Copyright (c) 1994, Regents of the University of California
*
*
* IDENTIFICATION
- * $Header: /cvsroot/pgsql/src/backend/access/nbtree/nbtutils.c,v 1.56 2003/11/12 21:15:47 tgl Exp $
+ * src/backend/access/nbtree/nbtutils.c
*
*-------------------------------------------------------------------------
*/
#include "postgres.h"
-#include "access/genam.h"
+#include <time.h>
+
#include "access/nbtree.h"
-#include "catalog/catalog.h"
-#include "executor/execdebug.h"
+#include "access/reloptions.h"
+#include "access/relscan.h"
+#include "miscadmin.h"
+#include "utils/array.h"
+#include "utils/lsyscache.h"
+#include "utils/memutils.h"
+#include "utils/rel.h"
+
+
+typedef struct BTSortArrayContext
+{
+ FmgrInfo flinfo;
+ Oid collation;
+ bool reverse;
+} BTSortArrayContext;
+
+static Datum _bt_find_extreme_element(IndexScanDesc scan, ScanKey skey,
+ StrategyNumber strat,
+ Datum *elems, int nelems);
+static int _bt_sort_array_elements(IndexScanDesc scan, ScanKey skey,
+ bool reverse,
+ Datum *elems, int nelems);
+static int _bt_compare_array_elements(const void *a, const void *b, void *arg);
+static bool _bt_compare_scankey_args(IndexScanDesc scan, ScanKey op,
+ ScanKey leftarg, ScanKey rightarg,
+ bool *result);
+static bool _bt_fix_scankey_strategy(ScanKey skey, int16 *indoption);
+static void _bt_mark_scankey_required(ScanKey skey);
+static bool _bt_check_rowcompare(ScanKey skey,
+ IndexTuple tuple, TupleDesc tupdesc,
+ ScanDirection dir, bool *continuescan);
/*
* _bt_mkscankey
- * Build a scan key that contains comparison data from itup
+ * Build an insertion scan key that contains comparison data from itup
* as well as comparator routines appropriate to the key datatypes.
*
* The result is intended for use with _bt_compare().
{
ScanKey skey;
TupleDesc itupdesc;
- int natts;
+ int indnatts PG_USED_FOR_ASSERTS_ONLY;
+ int indnkeyatts;
+ int16 *indoption;
int i;
itupdesc = RelationGetDescr(rel);
- natts = RelationGetNumberOfAttributes(rel);
+ indnatts = IndexRelationGetNumberOfAttributes(rel);
+ indnkeyatts = IndexRelationGetNumberOfKeyAttributes(rel);
+ indoption = rel->rd_indoption;
+
+ Assert(indnkeyatts > 0);
+ Assert(indnkeyatts <= indnatts);
+ Assert(BTreeTupleGetNAtts(itup, rel) == indnatts ||
+ BTreeTupleGetNAtts(itup, rel) == indnkeyatts);
- skey = (ScanKey) palloc(natts * sizeof(ScanKeyData));
+ /*
+ * We'll execute search using scan key constructed on key columns. Non-key
+ * (INCLUDE index) columns are always omitted from scan keys.
+ */
+ skey = (ScanKey) palloc(indnkeyatts * sizeof(ScanKeyData));
- for (i = 0; i < natts; i++)
+ for (i = 0; i < indnkeyatts; i++)
{
FmgrInfo *procinfo;
Datum arg;
bool null;
+ int flags;
/*
* We can use the cached (default) support procs since no cross-type
*/
procinfo = index_getprocinfo(rel, i + 1, BTORDER_PROC);
arg = index_getattr(itup, i + 1, itupdesc, &null);
+ flags = (null ? SK_ISNULL : 0) | (indoption[i] << SK_BT_INDOPTION_SHIFT);
ScanKeyEntryInitializeWithInfo(&skey[i],
- null ? SK_ISNULL : 0,
+ flags,
(AttrNumber) (i + 1),
InvalidStrategy,
InvalidOid,
+ rel->rd_indcollation[i],
procinfo,
arg);
}
/*
* _bt_mkscankey_nodata
- * Build a scan key that contains comparator routines appropriate to
- * the key datatypes, but no comparison data. The comparison data
- * ultimately used must match the key datatypes.
+ * Build an insertion scan key that contains 3-way comparator routines
+ * appropriate to the key datatypes, but no comparison data. The
+ * comparison data ultimately used must match the key datatypes.
*
- * The result cannot be used with _bt_compare(). Currently this
+ * The result cannot be used with _bt_compare(), unless comparison
+ * data is first stored into the key entries. Currently this
* routine is only called by nbtsort.c and tuplesort.c, which have
* their own comparison routines.
*/
_bt_mkscankey_nodata(Relation rel)
{
ScanKey skey;
- TupleDesc itupdesc;
- int natts;
+ int indnkeyatts;
+ int16 *indoption;
int i;
- itupdesc = RelationGetDescr(rel);
- natts = RelationGetNumberOfAttributes(rel);
+ indnkeyatts = IndexRelationGetNumberOfKeyAttributes(rel);
+ indoption = rel->rd_indoption;
- skey = (ScanKey) palloc(natts * sizeof(ScanKeyData));
+ skey = (ScanKey) palloc(indnkeyatts * sizeof(ScanKeyData));
- for (i = 0; i < natts; i++)
+ for (i = 0; i < indnkeyatts; i++)
{
FmgrInfo *procinfo;
+ int flags;
/*
* We can use the cached (default) support procs since no cross-type
* comparison can be needed.
*/
procinfo = index_getprocinfo(rel, i + 1, BTORDER_PROC);
+ flags = SK_ISNULL | (indoption[i] << SK_BT_INDOPTION_SHIFT);
ScanKeyEntryInitializeWithInfo(&skey[i],
- SK_ISNULL,
+ flags,
(AttrNumber) (i + 1),
InvalidStrategy,
InvalidOid,
+ rel->rd_indcollation[i],
procinfo,
(Datum) 0);
}
{
BTStack ostack;
- while (stack != (BTStack) NULL)
+ while (stack != NULL)
{
ostack = stack;
stack = stack->bts_parent;
}
}
+
+/*
+ * _bt_preprocess_array_keys() -- Preprocess SK_SEARCHARRAY scan keys
+ *
+ * If there are any SK_SEARCHARRAY scan keys, deconstruct the array(s) and
+ * set up BTArrayKeyInfo info for each one that is an equality-type key.
+ * Prepare modified scan keys in so->arrayKeyData, which will hold the current
+ * array elements during each primitive indexscan operation. For inequality
+ * array keys, it's sufficient to find the extreme element value and replace
+ * the whole array with that scalar value.
+ *
+ * Note: the reason we need so->arrayKeyData, rather than just scribbling
+ * on scan->keyData, is that callers are permitted to call btrescan without
+ * supplying a new set of scankey data.
+ */
+void
+_bt_preprocess_array_keys(IndexScanDesc scan)
+{
+ BTScanOpaque so = (BTScanOpaque) scan->opaque;
+ int numberOfKeys = scan->numberOfKeys;
+ int16 *indoption = scan->indexRelation->rd_indoption;
+ int numArrayKeys;
+ ScanKey cur;
+ int i;
+ MemoryContext oldContext;
+
+ /* Quick check to see if there are any array keys */
+ numArrayKeys = 0;
+ for (i = 0; i < numberOfKeys; i++)
+ {
+ cur = &scan->keyData[i];
+ if (cur->sk_flags & SK_SEARCHARRAY)
+ {
+ numArrayKeys++;
+ Assert(!(cur->sk_flags & (SK_ROW_HEADER | SK_SEARCHNULL | SK_SEARCHNOTNULL)));
+ /* If any arrays are null as a whole, we can quit right now. */
+ if (cur->sk_flags & SK_ISNULL)
+ {
+ so->numArrayKeys = -1;
+ so->arrayKeyData = NULL;
+ return;
+ }
+ }
+ }
+
+ /* Quit if nothing to do. */
+ if (numArrayKeys == 0)
+ {
+ so->numArrayKeys = 0;
+ so->arrayKeyData = NULL;
+ return;
+ }
+
+ /*
+ * Make a scan-lifespan context to hold array-associated data, or reset it
+ * if we already have one from a previous rescan cycle.
+ */
+ if (so->arrayContext == NULL)
+ so->arrayContext = AllocSetContextCreate(CurrentMemoryContext,
+ "BTree array context",
+ ALLOCSET_SMALL_SIZES);
+ else
+ MemoryContextReset(so->arrayContext);
+
+ oldContext = MemoryContextSwitchTo(so->arrayContext);
+
+ /* Create modifiable copy of scan->keyData in the workspace context */
+ so->arrayKeyData = (ScanKey) palloc(scan->numberOfKeys * sizeof(ScanKeyData));
+ memcpy(so->arrayKeyData,
+ scan->keyData,
+ scan->numberOfKeys * sizeof(ScanKeyData));
+
+ /* Allocate space for per-array data in the workspace context */
+ so->arrayKeys = (BTArrayKeyInfo *) palloc0(numArrayKeys * sizeof(BTArrayKeyInfo));
+
+ /* Now process each array key */
+ numArrayKeys = 0;
+ for (i = 0; i < numberOfKeys; i++)
+ {
+ ArrayType *arrayval;
+ int16 elmlen;
+ bool elmbyval;
+ char elmalign;
+ int num_elems;
+ Datum *elem_values;
+ bool *elem_nulls;
+ int num_nonnulls;
+ int j;
+
+ cur = &so->arrayKeyData[i];
+ if (!(cur->sk_flags & SK_SEARCHARRAY))
+ continue;
+
+ /*
+ * First, deconstruct the array into elements. Anything allocated
+ * here (including a possibly detoasted array value) is in the
+ * workspace context.
+ */
+ arrayval = DatumGetArrayTypeP(cur->sk_argument);
+ /* We could cache this data, but not clear it's worth it */
+ get_typlenbyvalalign(ARR_ELEMTYPE(arrayval),
+ &elmlen, &elmbyval, &elmalign);
+ deconstruct_array(arrayval,
+ ARR_ELEMTYPE(arrayval),
+ elmlen, elmbyval, elmalign,
+ &elem_values, &elem_nulls, &num_elems);
+
+ /*
+ * Compress out any null elements. We can ignore them since we assume
+ * all btree operators are strict.
+ */
+ num_nonnulls = 0;
+ for (j = 0; j < num_elems; j++)
+ {
+ if (!elem_nulls[j])
+ elem_values[num_nonnulls++] = elem_values[j];
+ }
+
+ /* We could pfree(elem_nulls) now, but not worth the cycles */
+
+ /* If there's no non-nulls, the scan qual is unsatisfiable */
+ if (num_nonnulls == 0)
+ {
+ numArrayKeys = -1;
+ break;
+ }
+
+ /*
+ * If the comparison operator is not equality, then the array qual
+ * degenerates to a simple comparison against the smallest or largest
+ * non-null array element, as appropriate.
+ */
+ switch (cur->sk_strategy)
+ {
+ case BTLessStrategyNumber:
+ case BTLessEqualStrategyNumber:
+ cur->sk_argument =
+ _bt_find_extreme_element(scan, cur,
+ BTGreaterStrategyNumber,
+ elem_values, num_nonnulls);
+ continue;
+ case BTEqualStrategyNumber:
+ /* proceed with rest of loop */
+ break;
+ case BTGreaterEqualStrategyNumber:
+ case BTGreaterStrategyNumber:
+ cur->sk_argument =
+ _bt_find_extreme_element(scan, cur,
+ BTLessStrategyNumber,
+ elem_values, num_nonnulls);
+ continue;
+ default:
+ elog(ERROR, "unrecognized StrategyNumber: %d",
+ (int) cur->sk_strategy);
+ break;
+ }
+
+ /*
+ * Sort the non-null elements and eliminate any duplicates. We must
+ * sort in the same ordering used by the index column, so that the
+ * successive primitive indexscans produce data in index order.
+ */
+ num_elems = _bt_sort_array_elements(scan, cur,
+ (indoption[cur->sk_attno - 1] & INDOPTION_DESC) != 0,
+ elem_values, num_nonnulls);
+
+ /*
+ * And set up the BTArrayKeyInfo data.
+ */
+ so->arrayKeys[numArrayKeys].scan_key = i;
+ so->arrayKeys[numArrayKeys].num_elems = num_elems;
+ so->arrayKeys[numArrayKeys].elem_values = elem_values;
+ numArrayKeys++;
+ }
+
+ so->numArrayKeys = numArrayKeys;
+
+ MemoryContextSwitchTo(oldContext);
+}
+
+/*
+ * _bt_find_extreme_element() -- get least or greatest array element
+ *
+ * scan and skey identify the index column, whose opfamily determines the
+ * comparison semantics. strat should be BTLessStrategyNumber to get the
+ * least element, or BTGreaterStrategyNumber to get the greatest.
+ */
+static Datum
+_bt_find_extreme_element(IndexScanDesc scan, ScanKey skey,
+ StrategyNumber strat,
+ Datum *elems, int nelems)
+{
+ Relation rel = scan->indexRelation;
+ Oid elemtype,
+ cmp_op;
+ RegProcedure cmp_proc;
+ FmgrInfo flinfo;
+ Datum result;
+ int i;
+
+ /*
+ * Determine the nominal datatype of the array elements. We have to
+ * support the convention that sk_subtype == InvalidOid means the opclass
+ * input type; this is a hack to simplify life for ScanKeyInit().
+ */
+ elemtype = skey->sk_subtype;
+ if (elemtype == InvalidOid)
+ elemtype = rel->rd_opcintype[skey->sk_attno - 1];
+
+ /*
+ * Look up the appropriate comparison operator in the opfamily.
+ *
+ * Note: it's possible that this would fail, if the opfamily is
+ * incomplete, but it seems quite unlikely that an opfamily would omit
+ * non-cross-type comparison operators for any datatype that it supports
+ * at all.
+ */
+ cmp_op = get_opfamily_member(rel->rd_opfamily[skey->sk_attno - 1],
+ elemtype,
+ elemtype,
+ strat);
+ if (!OidIsValid(cmp_op))
+ elog(ERROR, "missing operator %d(%u,%u) in opfamily %u",
+ strat, elemtype, elemtype,
+ rel->rd_opfamily[skey->sk_attno - 1]);
+ cmp_proc = get_opcode(cmp_op);
+ if (!RegProcedureIsValid(cmp_proc))
+ elog(ERROR, "missing oprcode for operator %u", cmp_op);
+
+ fmgr_info(cmp_proc, &flinfo);
+
+ Assert(nelems > 0);
+ result = elems[0];
+ for (i = 1; i < nelems; i++)
+ {
+ if (DatumGetBool(FunctionCall2Coll(&flinfo,
+ skey->sk_collation,
+ elems[i],
+ result)))
+ result = elems[i];
+ }
+
+ return result;
+}
+
+/*
+ * _bt_sort_array_elements() -- sort and de-dup array elements
+ *
+ * The array elements are sorted in-place, and the new number of elements
+ * after duplicate removal is returned.
+ *
+ * scan and skey identify the index column, whose opfamily determines the
+ * comparison semantics. If reverse is true, we sort in descending order.
+ */
+static int
+_bt_sort_array_elements(IndexScanDesc scan, ScanKey skey,
+ bool reverse,
+ Datum *elems, int nelems)
+{
+ Relation rel = scan->indexRelation;
+ Oid elemtype;
+ RegProcedure cmp_proc;
+ BTSortArrayContext cxt;
+ int last_non_dup;
+ int i;
+
+ if (nelems <= 1)
+ return nelems; /* no work to do */
+
+ /*
+ * Determine the nominal datatype of the array elements. We have to
+ * support the convention that sk_subtype == InvalidOid means the opclass
+ * input type; this is a hack to simplify life for ScanKeyInit().
+ */
+ elemtype = skey->sk_subtype;
+ if (elemtype == InvalidOid)
+ elemtype = rel->rd_opcintype[skey->sk_attno - 1];
+
+ /*
+ * Look up the appropriate comparison function in the opfamily.
+ *
+ * Note: it's possible that this would fail, if the opfamily is
+ * incomplete, but it seems quite unlikely that an opfamily would omit
+ * non-cross-type support functions for any datatype that it supports at
+ * all.
+ */
+ cmp_proc = get_opfamily_proc(rel->rd_opfamily[skey->sk_attno - 1],
+ elemtype,
+ elemtype,
+ BTORDER_PROC);
+ if (!RegProcedureIsValid(cmp_proc))
+ elog(ERROR, "missing support function %d(%u,%u) in opfamily %u",
+ BTORDER_PROC, elemtype, elemtype,
+ rel->rd_opfamily[skey->sk_attno - 1]);
+
+ /* Sort the array elements */
+ fmgr_info(cmp_proc, &cxt.flinfo);
+ cxt.collation = skey->sk_collation;
+ cxt.reverse = reverse;
+ qsort_arg((void *) elems, nelems, sizeof(Datum),
+ _bt_compare_array_elements, (void *) &cxt);
+
+ /* Now scan the sorted elements and remove duplicates */
+ last_non_dup = 0;
+ for (i = 1; i < nelems; i++)
+ {
+ int32 compare;
+
+ compare = DatumGetInt32(FunctionCall2Coll(&cxt.flinfo,
+ cxt.collation,
+ elems[last_non_dup],
+ elems[i]));
+ if (compare != 0)
+ elems[++last_non_dup] = elems[i];
+ }
+
+ return last_non_dup + 1;
+}
+
+/*
+ * qsort_arg comparator for sorting array elements
+ */
+static int
+_bt_compare_array_elements(const void *a, const void *b, void *arg)
+{
+ Datum da = *((const Datum *) a);
+ Datum db = *((const Datum *) b);
+ BTSortArrayContext *cxt = (BTSortArrayContext *) arg;
+ int32 compare;
+
+ compare = DatumGetInt32(FunctionCall2Coll(&cxt->flinfo,
+ cxt->collation,
+ da, db));
+ if (cxt->reverse)
+ compare = -compare;
+ return compare;
+}
+
+/*
+ * _bt_start_array_keys() -- Initialize array keys at start of a scan
+ *
+ * Set up the cur_elem counters and fill in the first sk_argument value for
+ * each array scankey. We can't do this until we know the scan direction.
+ */
+void
+_bt_start_array_keys(IndexScanDesc scan, ScanDirection dir)
+{
+ BTScanOpaque so = (BTScanOpaque) scan->opaque;
+ int i;
+
+ for (i = 0; i < so->numArrayKeys; i++)
+ {
+ BTArrayKeyInfo *curArrayKey = &so->arrayKeys[i];
+ ScanKey skey = &so->arrayKeyData[curArrayKey->scan_key];
+
+ Assert(curArrayKey->num_elems > 0);
+ if (ScanDirectionIsBackward(dir))
+ curArrayKey->cur_elem = curArrayKey->num_elems - 1;
+ else
+ curArrayKey->cur_elem = 0;
+ skey->sk_argument = curArrayKey->elem_values[curArrayKey->cur_elem];
+ }
+}
+
+/*
+ * _bt_advance_array_keys() -- Advance to next set of array elements
+ *
+ * Returns true if there is another set of values to consider, false if not.
+ * On true result, the scankeys are initialized with the next set of values.
+ */
+bool
+_bt_advance_array_keys(IndexScanDesc scan, ScanDirection dir)
+{
+ BTScanOpaque so = (BTScanOpaque) scan->opaque;
+ bool found = false;
+ int i;
+
+ /*
+ * We must advance the last array key most quickly, since it will
+ * correspond to the lowest-order index column among the available
+ * qualifications. This is necessary to ensure correct ordering of output
+ * when there are multiple array keys.
+ */
+ for (i = so->numArrayKeys - 1; i >= 0; i--)
+ {
+ BTArrayKeyInfo *curArrayKey = &so->arrayKeys[i];
+ ScanKey skey = &so->arrayKeyData[curArrayKey->scan_key];
+ int cur_elem = curArrayKey->cur_elem;
+ int num_elems = curArrayKey->num_elems;
+
+ if (ScanDirectionIsBackward(dir))
+ {
+ if (--cur_elem < 0)
+ {
+ cur_elem = num_elems - 1;
+ found = false; /* need to advance next array key */
+ }
+ else
+ found = true;
+ }
+ else
+ {
+ if (++cur_elem >= num_elems)
+ {
+ cur_elem = 0;
+ found = false; /* need to advance next array key */
+ }
+ else
+ found = true;
+ }
+
+ curArrayKey->cur_elem = cur_elem;
+ skey->sk_argument = curArrayKey->elem_values[cur_elem];
+ if (found)
+ break;
+ }
+
+ /* advance parallel scan */
+ if (scan->parallel_scan != NULL)
+ _bt_parallel_advance_array_keys(scan);
+
+ return found;
+}
+
+/*
+ * _bt_mark_array_keys() -- Handle array keys during btmarkpos
+ *
+ * Save the current state of the array keys as the "mark" position.
+ */
+void
+_bt_mark_array_keys(IndexScanDesc scan)
+{
+ BTScanOpaque so = (BTScanOpaque) scan->opaque;
+ int i;
+
+ for (i = 0; i < so->numArrayKeys; i++)
+ {
+ BTArrayKeyInfo *curArrayKey = &so->arrayKeys[i];
+
+ curArrayKey->mark_elem = curArrayKey->cur_elem;
+ }
+}
+
/*
- * Construct a BTItem from a plain IndexTuple.
+ * _bt_restore_array_keys() -- Handle array keys during btrestrpos
*
- * This is now useless code, since a BTItem *is* an index tuple with
- * no extra stuff. We hang onto it for the moment to preserve the
- * notational distinction, in case we want to add some extra stuff
- * again someday.
+ * Restore the array keys to where they were when the mark was set.
*/
-BTItem
-_bt_formitem(IndexTuple itup)
+void
+_bt_restore_array_keys(IndexScanDesc scan)
{
- int nbytes_btitem;
- BTItem btitem;
- Size tuplen;
+ BTScanOpaque so = (BTScanOpaque) scan->opaque;
+ bool changed = false;
+ int i;
- /* make a copy of the index tuple with room for extra stuff */
- tuplen = IndexTupleSize(itup);
- nbytes_btitem = tuplen + (sizeof(BTItemData) - sizeof(IndexTupleData));
+ /* Restore each array key to its position when the mark was set */
+ for (i = 0; i < so->numArrayKeys; i++)
+ {
+ BTArrayKeyInfo *curArrayKey = &so->arrayKeys[i];
+ ScanKey skey = &so->arrayKeyData[curArrayKey->scan_key];
+ int mark_elem = curArrayKey->mark_elem;
- btitem = (BTItem) palloc(nbytes_btitem);
- memcpy((char *) &(btitem->bti_itup), (char *) itup, tuplen);
+ if (curArrayKey->cur_elem != mark_elem)
+ {
+ curArrayKey->cur_elem = mark_elem;
+ skey->sk_argument = curArrayKey->elem_values[mark_elem];
+ changed = true;
+ }
+ }
- return btitem;
+ /*
+ * If we changed any keys, we must redo _bt_preprocess_keys. That might
+ * sound like overkill, but in cases with multiple keys per index column
+ * it seems necessary to do the full set of pushups.
+ */
+ if (changed)
+ {
+ _bt_preprocess_keys(scan);
+ /* The mark should have been set on a consistent set of keys... */
+ Assert(so->qual_ok);
+ }
}
-/*----------
+
+/*
* _bt_preprocess_keys() -- Preprocess scan keys
*
- * The caller-supplied keys (in scan->keyData[]) are copied to
- * so->keyData[] with possible transformation. scan->numberOfKeys is
- * the number of input keys, so->numberOfKeys gets the number of output
- * keys (possibly less, never greater).
+ * The given search-type keys (in scan->keyData[] or so->arrayKeyData[])
+ * are copied to so->keyData[] with possible transformation.
+ * scan->numberOfKeys is the number of input keys, so->numberOfKeys gets
+ * the number of output keys (possibly less, never greater).
*
- * The primary purpose of this routine is to discover how many scan keys
- * must be satisfied to continue the scan. It also attempts to eliminate
- * redundant keys and detect contradictory keys. At present, redundant and
- * contradictory keys can only be detected for same-data-type comparisons,
- * but that's the usual case so it seems worth doing.
+ * The output keys are marked with additional sk_flag bits beyond the
+ * system-standard bits supplied by the caller. The DESC and NULLS_FIRST
+ * indoption bits for the relevant index attribute are copied into the flags.
+ * Also, for a DESC column, we commute (flip) all the sk_strategy numbers
+ * so that the index sorts in the desired direction.
+ *
+ * One key purpose of this routine is to discover which scan keys must be
+ * satisfied to continue the scan. It also attempts to eliminate redundant
+ * keys and detect contradictory keys. (If the index opfamily provides
+ * incomplete sets of cross-type operators, we may fail to detect redundant
+ * or contradictory keys, but we can survive that.)
*
* The output keys must be sorted by index attribute. Presently we expect
* (but verify) that the input keys are already so sorted --- this is done
- * by group_clauses_by_indexkey() in indxpath.c. Some reordering of the keys
+ * by match_clauses_to_index() in indxpath.c. Some reordering of the keys
* within each attribute may be done as a byproduct of the processing here,
* but no other code depends on that.
*
- * Aside from preparing so->keyData[], this routine sets
- * so->numberOfRequiredKeys to the number of quals that must be satisfied to
- * continue the scan. _bt_checkkeys uses this. For example, if the quals
+ * The output keys are marked with flags SK_BT_REQFWD and/or SK_BT_REQBKWD
+ * if they must be satisfied in order to continue the scan forward or backward
+ * respectively. _bt_checkkeys uses these flags. For example, if the quals
* are "x = 1 AND y < 4 AND z < 5", then _bt_checkkeys will reject a tuple
* (1,2,7), but we must continue the scan in case there are tuples (1,3,z).
* But once we reach tuples like (1,4,z) we can stop scanning because no
- * later tuples could match. This is reflected by setting
- * so->numberOfRequiredKeys to 2, the number of leading keys that must be
- * matched to continue the scan. In general, numberOfRequiredKeys is equal
- * to the number of keys for leading attributes with "=" keys, plus the
- * key(s) for the first non "=" attribute, which can be seen to be correct
- * by considering the above example.
+ * later tuples could match. This is reflected by marking the x and y keys,
+ * but not the z key, with SK_BT_REQFWD. In general, the keys for leading
+ * attributes with "=" keys are marked both SK_BT_REQFWD and SK_BT_REQBKWD.
+ * For the first attribute without an "=" key, any "<" and "<=" keys are
+ * marked SK_BT_REQFWD while any ">" and ">=" keys are marked SK_BT_REQBKWD.
+ * This can be seen to be correct by considering the above example. Note
+ * in particular that if there are no keys for a given attribute, the keys for
+ * subsequent attributes can never be required; for instance "WHERE y = 4"
+ * requires a full-index scan.
*
* If possible, redundant keys are eliminated: we keep only the tightest
* >/>= bound and the tightest </<= bound, and if there's an = key then
* that's the only one returned. (So, we return either a single = key,
- * or one or two boundary-condition keys for each attr.) However, we can
- * only detect redundant keys when the right-hand datatypes are all equal
- * to the index datatype, because we do not know suitable operators for
- * comparing right-hand values of two different datatypes. (In theory
- * we could handle comparison of a RHS of the index datatype with a RHS of
- * another type, but that seems too much pain for too little gain.) So,
- * keys whose operator has a nondefault subtype (ie, its RHS is not of the
- * index datatype) are ignored here, except for noting whether they impose
- * an "=" condition or not.
+ * or one or two boundary-condition keys for each attr.) However, if we
+ * cannot compare two keys for lack of a suitable cross-type operator,
+ * we cannot eliminate either. If there are two such keys of the same
+ * operator strategy, the second one is just pushed into the output array
+ * without further processing here. We may also emit both >/>= or both
+ * </<= keys if we can't compare them. The logic about required keys still
+ * works if we don't eliminate redundant keys.
+ *
+ * Note that one reason we need direction-sensitive required-key flags is
+ * precisely that we may not be able to eliminate redundant keys. Suppose
+ * we have "x > 4::int AND x > 10::bigint", and we are unable to determine
+ * which key is more restrictive for lack of a suitable cross-type operator.
+ * _bt_first will arbitrarily pick one of the keys to do the initial
+ * positioning with. If it picks x > 4, then the x > 10 condition will fail
+ * until we reach index entries > 10; but we can't stop the scan just because
+ * x > 10 is failing. On the other hand, if we are scanning backwards, then
+ * failure of either key is indeed enough to stop the scan. (In general, when
+ * inequality keys are present, the initial-positioning code only promises to
+ * position before the first possible match, not exactly at the first match,
+ * for a forward scan; or after the last match for a backward scan.)
*
* As a byproduct of this work, we can detect contradictory quals such
- * as "x = 1 AND x > 2". If we see that, we return so->quals_ok = FALSE,
+ * as "x = 1 AND x > 2". If we see that, we return so->qual_ok = false,
* indicating the scan need not be run at all since no tuples can match.
- * Again though, only keys with RHS datatype equal to the index datatype
- * can be checked for contradictions.
- *
- * Furthermore, we detect the case where the index is unique and we have
- * equality quals for all columns. In this case there can be at most one
- * (visible) matching tuple. index_getnext uses this to avoid uselessly
- * continuing the scan after finding one match.
- *----------
+ * (In this case we do not bother completing the output key array!)
+ * Again, missing cross-type operators might cause us to fail to prove the
+ * quals contradictory when they really are, but the scan will work correctly.
+ *
+ * Row comparison keys are currently also treated without any smarts:
+ * we just transfer them into the preprocessed array without any
+ * editorialization. We can treat them the same as an ordinary inequality
+ * comparison on the row's first index column, for the purposes of the logic
+ * about required keys.
+ *
+ * Note: the reason we have to copy the preprocessed scan keys into private
+ * storage is that we are modifying the array based on comparisons of the
+ * key argument values, which could change on a rescan or after moving to
+ * new elements of array keys. Therefore we can't overwrite the source data.
*/
void
_bt_preprocess_keys(IndexScanDesc scan)
{
- Relation relation = scan->indexRelation;
BTScanOpaque so = (BTScanOpaque) scan->opaque;
int numberOfKeys = scan->numberOfKeys;
+ int16 *indoption = scan->indexRelation->rd_indoption;
int new_numberOfKeys;
+ int numberOfEqualCols;
ScanKey inkeys;
ScanKey outkeys;
ScanKey cur;
ScanKey xform[BTMaxStrategyNumber];
- bool allEqualSoFar;
- bool hasOtherTypeEqual;
- Datum test;
+ bool test_result;
int i,
j;
AttrNumber attno;
/* initialize result variables */
so->qual_ok = true;
so->numberOfKeys = 0;
- so->numberOfRequiredKeys = 0;
- scan->keys_are_unique = false;
if (numberOfKeys < 1)
return; /* done if qual-less scan */
- inkeys = scan->keyData;
+ /*
+ * Read so->arrayKeyData if array keys are present, else scan->keyData
+ */
+ if (so->arrayKeyData != NULL)
+ inkeys = so->arrayKeyData;
+ else
+ inkeys = scan->keyData;
+
outkeys = so->keyData;
cur = &inkeys[0];
/* we check that input keys are correctly ordered */
- if (cur->sk_attno != 1)
- elog(ERROR, "key(s) for attribute 1 missed");
+ if (cur->sk_attno < 1)
+ elog(ERROR, "btree index keys must be ordered by attribute");
/* We can short-circuit most of the work if there's just one key */
if (numberOfKeys == 1)
{
- /*
- * We don't use indices for 'A is null' and 'A is not null'
- * currently and 'A < = > <> NULL' will always fail - so qual is
- * not OK if comparison value is NULL. - vadim 03/21/97
- */
- if (cur->sk_flags & SK_ISNULL)
+ /* Apply indoption to scankey (might change sk_strategy!) */
+ if (!_bt_fix_scankey_strategy(cur, indoption))
so->qual_ok = false;
- else if (relation->rd_index->indisunique &&
- relation->rd_rel->relnatts == 1)
- {
- /* it's a unique index, do we have an equality qual? */
- if (cur->sk_strategy == BTEqualStrategyNumber)
- scan->keys_are_unique = true;
- }
- memcpy(outkeys, inkeys, sizeof(ScanKeyData));
+ memcpy(outkeys, cur, sizeof(ScanKeyData));
so->numberOfKeys = 1;
- so->numberOfRequiredKeys = 1;
+ /* We can mark the qual as required if it's for first index col */
+ if (cur->sk_attno == 1)
+ _bt_mark_scankey_required(outkeys);
return;
}
* Otherwise, do the full set of pushups.
*/
new_numberOfKeys = 0;
- allEqualSoFar = true;
+ numberOfEqualCols = 0;
/*
* Initialize for processing of keys for attr 1.
*
- * xform[i] points to the currently best scan key of strategy type i+1,
- * if any is found with a default operator subtype; it is NULL if we
- * haven't yet found such a key for this attr. Scan keys of nondefault
- * subtypes are transferred to the output with no processing except for
- * noting if they are of "=" type.
+ * xform[i] points to the currently best scan key of strategy type i+1; it
+ * is NULL if we haven't yet found such a key for this attr.
*/
attno = 1;
memset(xform, 0, sizeof(xform));
- hasOtherTypeEqual = false;
/*
- * Loop iterates from 0 to numberOfKeys inclusive; we use the last
- * pass to handle after-last-key processing. Actual exit from the
- * loop is at the "break" statement below.
+ * Loop iterates from 0 to numberOfKeys inclusive; we use the last pass to
+ * handle after-last-key processing. Actual exit from the loop is at the
+ * "break" statement below.
*/
for (i = 0;; cur++, i++)
{
if (i < numberOfKeys)
{
- /* See comments above: any NULL implies cannot match qual */
- if (cur->sk_flags & SK_ISNULL)
+ /* Apply indoption to scankey (might change sk_strategy!) */
+ if (!_bt_fix_scankey_strategy(cur, indoption))
{
+ /* NULL can't be matched, so give up */
so->qual_ok = false;
-
- /*
- * Quit processing so we don't try to invoke comparison
- * routines on NULLs.
- */
return;
}
}
/*
- * If we are at the end of the keys for a particular attr, finish
- * up processing and emit the cleaned-up keys.
+ * If we are at the end of the keys for a particular attr, finish up
+ * processing and emit the cleaned-up keys.
*/
if (i == numberOfKeys || cur->sk_attno != attno)
{
- bool priorAllEqualSoFar = allEqualSoFar;
+ int priorNumberOfEqualCols = numberOfEqualCols;
/* check input keys are correctly ordered */
- if (i < numberOfKeys && cur->sk_attno != attno + 1)
- elog(ERROR, "key(s) for attribute %d missed", attno + 1);
+ if (i < numberOfKeys && cur->sk_attno < attno)
+ elog(ERROR, "btree index keys must be ordered by attribute");
/*
- * If = has been specified, no other key will be used. In case
- * of key > 2 && key == 1 and so on we have to set qual_ok to
- * false before discarding the other keys.
+ * If = has been specified, all other keys can be eliminated as
+ * redundant. If we have a case like key = 1 AND key > 2, we can
+ * set qual_ok to false and abandon further processing.
+ *
+ * We also have to deal with the case of "key IS NULL", which is
+ * unsatisfiable in combination with any other index condition. By
+ * the time we get here, that's been classified as an equality
+ * check, and we've rejected any combination of it with a regular
+ * equality condition; but not with other types of conditions.
*/
if (xform[BTEqualStrategyNumber - 1])
{
if (!chk || j == (BTEqualStrategyNumber - 1))
continue;
- test = FunctionCall2(&chk->sk_func,
- eq->sk_argument,
- chk->sk_argument);
- if (!DatumGetBool(test))
+
+ if (eq->sk_flags & SK_SEARCHNULL)
{
+ /* IS NULL is contradictory to anything else */
so->qual_ok = false;
- break;
+ return;
+ }
+
+ if (_bt_compare_scankey_args(scan, chk, eq, chk,
+ &test_result))
+ {
+ if (!test_result)
+ {
+ /* keys proven mutually contradictory */
+ so->qual_ok = false;
+ return;
+ }
+ /* else discard the redundant non-equality key */
+ xform[j] = NULL;
}
+ /* else, cannot determine redundancy, keep both keys */
}
- xform[BTLessStrategyNumber - 1] = NULL;
- xform[BTLessEqualStrategyNumber - 1] = NULL;
- xform[BTGreaterEqualStrategyNumber - 1] = NULL;
- xform[BTGreaterStrategyNumber - 1] = NULL;
- }
- else
- {
- /*
- * If no "=" for this key, we're done with required keys
- */
- if (! hasOtherTypeEqual)
- allEqualSoFar = false;
+ /* track number of attrs for which we have "=" keys */
+ numberOfEqualCols++;
}
- /* keep only one of <, <= */
+ /* try to keep only one of <, <= */
if (xform[BTLessStrategyNumber - 1]
&& xform[BTLessEqualStrategyNumber - 1])
{
- ScanKey lt = xform[BTLessStrategyNumber - 1];
- ScanKey le = xform[BTLessEqualStrategyNumber - 1];
-
- test = FunctionCall2(&le->sk_func,
- lt->sk_argument,
- le->sk_argument);
- if (DatumGetBool(test))
- xform[BTLessEqualStrategyNumber - 1] = NULL;
- else
- xform[BTLessStrategyNumber - 1] = NULL;
+ ScanKey lt = xform[BTLessStrategyNumber - 1];
+ ScanKey le = xform[BTLessEqualStrategyNumber - 1];
+
+ if (_bt_compare_scankey_args(scan, le, lt, le,
+ &test_result))
+ {
+ if (test_result)
+ xform[BTLessEqualStrategyNumber - 1] = NULL;
+ else
+ xform[BTLessStrategyNumber - 1] = NULL;
+ }
}
- /* keep only one of >, >= */
+ /* try to keep only one of >, >= */
if (xform[BTGreaterStrategyNumber - 1]
&& xform[BTGreaterEqualStrategyNumber - 1])
{
- ScanKey gt = xform[BTGreaterStrategyNumber - 1];
- ScanKey ge = xform[BTGreaterEqualStrategyNumber - 1];
-
- test = FunctionCall2(&ge->sk_func,
- gt->sk_argument,
- ge->sk_argument);
- if (DatumGetBool(test))
- xform[BTGreaterEqualStrategyNumber - 1] = NULL;
- else
- xform[BTGreaterStrategyNumber - 1] = NULL;
+ ScanKey gt = xform[BTGreaterStrategyNumber - 1];
+ ScanKey ge = xform[BTGreaterEqualStrategyNumber - 1];
+
+ if (_bt_compare_scankey_args(scan, ge, gt, ge,
+ &test_result))
+ {
+ if (test_result)
+ xform[BTGreaterEqualStrategyNumber - 1] = NULL;
+ else
+ xform[BTGreaterStrategyNumber - 1] = NULL;
+ }
}
/*
- * Emit the cleaned-up keys into the outkeys[] array.
+ * Emit the cleaned-up keys into the outkeys[] array, and then
+ * mark them if they are required. They are required (possibly
+ * only in one direction) if all attrs before this one had "=".
*/
for (j = BTMaxStrategyNumber; --j >= 0;)
{
if (xform[j])
- memcpy(&outkeys[new_numberOfKeys++], xform[j],
- sizeof(ScanKeyData));
- }
+ {
+ ScanKey outkey = &outkeys[new_numberOfKeys++];
- /*
- * If all attrs before this one had "=", include these keys
- * into the required-keys count.
- */
- if (priorAllEqualSoFar)
- so->numberOfRequiredKeys = new_numberOfKeys;
+ memcpy(outkey, xform[j], sizeof(ScanKeyData));
+ if (priorNumberOfEqualCols == attno - 1)
+ _bt_mark_scankey_required(outkey);
+ }
+ }
/*
* Exit loop here if done.
/* Re-initialize for new attno */
attno = cur->sk_attno;
memset(xform, 0, sizeof(xform));
- hasOtherTypeEqual = false;
}
/* check strategy this key's operator corresponds to */
j = cur->sk_strategy - 1;
- /* if wrong RHS data type, punt */
- if (cur->sk_subtype != InvalidOid)
+ /* if row comparison, push it directly to the output array */
+ if (cur->sk_flags & SK_ROW_HEADER)
{
- memcpy(&outkeys[new_numberOfKeys++], cur,
- sizeof(ScanKeyData));
- if (j == (BTEqualStrategyNumber - 1))
- hasOtherTypeEqual = true;
+ ScanKey outkey = &outkeys[new_numberOfKeys++];
+
+ memcpy(outkey, cur, sizeof(ScanKeyData));
+ if (numberOfEqualCols == attno - 1)
+ _bt_mark_scankey_required(outkey);
+
+ /*
+ * We don't support RowCompare using equality; such a qual would
+ * mess up the numberOfEqualCols tracking.
+ */
+ Assert(j != (BTEqualStrategyNumber - 1));
continue;
}
/* have we seen one of these before? */
- if (xform[j])
- {
- /* yup, keep the more restrictive key */
- test = FunctionCall2(&cur->sk_func,
- cur->sk_argument,
- xform[j]->sk_argument);
- if (DatumGetBool(test))
- xform[j] = cur;
- else if (j == (BTEqualStrategyNumber - 1))
- {
- /* key == a && key == b, but a != b */
- so->qual_ok = false;
- return;
- }
- }
- else
+ if (xform[j] == NULL)
{
/* nope, so remember this scankey */
xform[j] = cur;
}
+ else
+ {
+ /* yup, keep only the more restrictive key */
+ if (_bt_compare_scankey_args(scan, cur, cur, xform[j],
+ &test_result))
+ {
+ if (test_result)
+ xform[j] = cur;
+ else if (j == (BTEqualStrategyNumber - 1))
+ {
+ /* key == a && key == b, but a != b */
+ so->qual_ok = false;
+ return;
+ }
+ /* else old key is more restrictive, keep it */
+ }
+ else
+ {
+ /*
+ * We can't determine which key is more restrictive. Keep the
+ * previous one in xform[j] and push this one directly to the
+ * output array.
+ */
+ ScanKey outkey = &outkeys[new_numberOfKeys++];
+
+ memcpy(outkey, cur, sizeof(ScanKeyData));
+ if (numberOfEqualCols == attno - 1)
+ _bt_mark_scankey_required(outkey);
+ }
+ }
}
so->numberOfKeys = new_numberOfKeys;
-
- /*
- * If unique index and we have equality keys for all columns, set
- * keys_are_unique flag for higher levels.
- */
- if (allEqualSoFar && relation->rd_index->indisunique &&
- relation->rd_rel->relnatts == new_numberOfKeys)
- scan->keys_are_unique = true;
}
/*
- * Test whether an indextuple satisfies all the scankey conditions.
+ * Compare two scankey values using a specified operator.
*
- * If the tuple fails to pass the qual, we also determine whether there's
- * any need to continue the scan beyond this tuple, and set *continuescan
+ * The test we want to perform is logically "leftarg op rightarg", where
+ * leftarg and rightarg are the sk_argument values in those ScanKeys, and
+ * the comparison operator is the one in the op ScanKey. However, in
+ * cross-data-type situations we may need to look up the correct operator in
+ * the index's opfamily: it is the one having amopstrategy = op->sk_strategy
+ * and amoplefttype/amoprighttype equal to the two argument datatypes.
+ *
+ * If the opfamily doesn't supply a complete set of cross-type operators we
+ * may not be able to make the comparison. If we can make the comparison
+ * we store the operator result in *result and return true. We return false
+ * if the comparison could not be made.
+ *
+ * Note: op always points at the same ScanKey as either leftarg or rightarg.
+ * Since we don't scribble on the scankeys, this aliasing should cause no
+ * trouble.
+ *
+ * Note: this routine needs to be insensitive to any DESC option applied
+ * to the index column. For example, "x < 4" is a tighter constraint than
+ * "x < 5" regardless of which way the index is sorted.
+ */
+static bool
+_bt_compare_scankey_args(IndexScanDesc scan, ScanKey op,
+ ScanKey leftarg, ScanKey rightarg,
+ bool *result)
+{
+ Relation rel = scan->indexRelation;
+ Oid lefttype,
+ righttype,
+ optype,
+ opcintype,
+ cmp_op;
+ StrategyNumber strat;
+
+ /*
+ * First, deal with cases where one or both args are NULL. This should
+ * only happen when the scankeys represent IS NULL/NOT NULL conditions.
+ */
+ if ((leftarg->sk_flags | rightarg->sk_flags) & SK_ISNULL)
+ {
+ bool leftnull,
+ rightnull;
+
+ if (leftarg->sk_flags & SK_ISNULL)
+ {
+ Assert(leftarg->sk_flags & (SK_SEARCHNULL | SK_SEARCHNOTNULL));
+ leftnull = true;
+ }
+ else
+ leftnull = false;
+ if (rightarg->sk_flags & SK_ISNULL)
+ {
+ Assert(rightarg->sk_flags & (SK_SEARCHNULL | SK_SEARCHNOTNULL));
+ rightnull = true;
+ }
+ else
+ rightnull = false;
+
+ /*
+ * We treat NULL as either greater than or less than all other values.
+ * Since true > false, the tests below work correctly for NULLS LAST
+ * logic. If the index is NULLS FIRST, we need to flip the strategy.
+ */
+ strat = op->sk_strategy;
+ if (op->sk_flags & SK_BT_NULLS_FIRST)
+ strat = BTCommuteStrategyNumber(strat);
+
+ switch (strat)
+ {
+ case BTLessStrategyNumber:
+ *result = (leftnull < rightnull);
+ break;
+ case BTLessEqualStrategyNumber:
+ *result = (leftnull <= rightnull);
+ break;
+ case BTEqualStrategyNumber:
+ *result = (leftnull == rightnull);
+ break;
+ case BTGreaterEqualStrategyNumber:
+ *result = (leftnull >= rightnull);
+ break;
+ case BTGreaterStrategyNumber:
+ *result = (leftnull > rightnull);
+ break;
+ default:
+ elog(ERROR, "unrecognized StrategyNumber: %d", (int) strat);
+ *result = false; /* keep compiler quiet */
+ break;
+ }
+ return true;
+ }
+
+ /*
+ * The opfamily we need to worry about is identified by the index column.
+ */
+ Assert(leftarg->sk_attno == rightarg->sk_attno);
+
+ opcintype = rel->rd_opcintype[leftarg->sk_attno - 1];
+
+ /*
+ * Determine the actual datatypes of the ScanKey arguments. We have to
+ * support the convention that sk_subtype == InvalidOid means the opclass
+ * input type; this is a hack to simplify life for ScanKeyInit().
+ */
+ lefttype = leftarg->sk_subtype;
+ if (lefttype == InvalidOid)
+ lefttype = opcintype;
+ righttype = rightarg->sk_subtype;
+ if (righttype == InvalidOid)
+ righttype = opcintype;
+ optype = op->sk_subtype;
+ if (optype == InvalidOid)
+ optype = opcintype;
+
+ /*
+ * If leftarg and rightarg match the types expected for the "op" scankey,
+ * we can use its already-looked-up comparison function.
+ */
+ if (lefttype == opcintype && righttype == optype)
+ {
+ *result = DatumGetBool(FunctionCall2Coll(&op->sk_func,
+ op->sk_collation,
+ leftarg->sk_argument,
+ rightarg->sk_argument));
+ return true;
+ }
+
+ /*
+ * Otherwise, we need to go to the syscache to find the appropriate
+ * operator. (This cannot result in infinite recursion, since no
+ * indexscan initiated by syscache lookup will use cross-data-type
+ * operators.)
+ *
+ * If the sk_strategy was flipped by _bt_fix_scankey_strategy, we have to
+ * un-flip it to get the correct opfamily member.
+ */
+ strat = op->sk_strategy;
+ if (op->sk_flags & SK_BT_DESC)
+ strat = BTCommuteStrategyNumber(strat);
+
+ cmp_op = get_opfamily_member(rel->rd_opfamily[leftarg->sk_attno - 1],
+ lefttype,
+ righttype,
+ strat);
+ if (OidIsValid(cmp_op))
+ {
+ RegProcedure cmp_proc = get_opcode(cmp_op);
+
+ if (RegProcedureIsValid(cmp_proc))
+ {
+ *result = DatumGetBool(OidFunctionCall2Coll(cmp_proc,
+ op->sk_collation,
+ leftarg->sk_argument,
+ rightarg->sk_argument));
+ return true;
+ }
+ }
+
+ /* Can't make the comparison */
+ *result = false; /* suppress compiler warnings */
+ return false;
+}
+
+/*
+ * Adjust a scankey's strategy and flags setting as needed for indoptions.
+ *
+ * We copy the appropriate indoption value into the scankey sk_flags
+ * (shifting to avoid clobbering system-defined flag bits). Also, if
+ * the DESC option is set, commute (flip) the operator strategy number.
+ *
+ * A secondary purpose is to check for IS NULL/NOT NULL scankeys and set up
+ * the strategy field correctly for them.
+ *
+ * Lastly, for ordinary scankeys (not IS NULL/NOT NULL), we check for a
+ * NULL comparison value. Since all btree operators are assumed strict,
+ * a NULL means that the qual cannot be satisfied. We return true if the
+ * comparison value isn't NULL, or false if the scan should be abandoned.
+ *
+ * This function is applied to the *input* scankey structure; therefore
+ * on a rescan we will be looking at already-processed scankeys. Hence
+ * we have to be careful not to re-commute the strategy if we already did it.
+ * It's a bit ugly to modify the caller's copy of the scankey but in practice
+ * there shouldn't be any problem, since the index's indoptions are certainly
+ * not going to change while the scankey survives.
+ */
+static bool
+_bt_fix_scankey_strategy(ScanKey skey, int16 *indoption)
+{
+ int addflags;
+
+ addflags = indoption[skey->sk_attno - 1] << SK_BT_INDOPTION_SHIFT;
+
+ /*
+ * We treat all btree operators as strict (even if they're not so marked
+ * in pg_proc). This means that it is impossible for an operator condition
+ * with a NULL comparison constant to succeed, and we can reject it right
+ * away.
+ *
+ * However, we now also support "x IS NULL" clauses as search conditions,
+ * so in that case keep going. The planner has not filled in any
+ * particular strategy in this case, so set it to BTEqualStrategyNumber
+ * --- we can treat IS NULL as an equality operator for purposes of search
+ * strategy.
+ *
+ * Likewise, "x IS NOT NULL" is supported. We treat that as either "less
+ * than NULL" in a NULLS LAST index, or "greater than NULL" in a NULLS
+ * FIRST index.
+ *
+ * Note: someday we might have to fill in sk_collation from the index
+ * column's collation. At the moment this is a non-issue because we'll
+ * never actually call the comparison operator on a NULL.
+ */
+ if (skey->sk_flags & SK_ISNULL)
+ {
+ /* SK_ISNULL shouldn't be set in a row header scankey */
+ Assert(!(skey->sk_flags & SK_ROW_HEADER));
+
+ /* Set indoption flags in scankey (might be done already) */
+ skey->sk_flags |= addflags;
+
+ /* Set correct strategy for IS NULL or NOT NULL search */
+ if (skey->sk_flags & SK_SEARCHNULL)
+ {
+ skey->sk_strategy = BTEqualStrategyNumber;
+ skey->sk_subtype = InvalidOid;
+ skey->sk_collation = InvalidOid;
+ }
+ else if (skey->sk_flags & SK_SEARCHNOTNULL)
+ {
+ if (skey->sk_flags & SK_BT_NULLS_FIRST)
+ skey->sk_strategy = BTGreaterStrategyNumber;
+ else
+ skey->sk_strategy = BTLessStrategyNumber;
+ skey->sk_subtype = InvalidOid;
+ skey->sk_collation = InvalidOid;
+ }
+ else
+ {
+ /* regular qual, so it cannot be satisfied */
+ return false;
+ }
+
+ /* Needn't do the rest */
+ return true;
+ }
+
+ /* Adjust strategy for DESC, if we didn't already */
+ if ((addflags & SK_BT_DESC) && !(skey->sk_flags & SK_BT_DESC))
+ skey->sk_strategy = BTCommuteStrategyNumber(skey->sk_strategy);
+ skey->sk_flags |= addflags;
+
+ /* If it's a row header, fix row member flags and strategies similarly */
+ if (skey->sk_flags & SK_ROW_HEADER)
+ {
+ ScanKey subkey = (ScanKey) DatumGetPointer(skey->sk_argument);
+
+ for (;;)
+ {
+ Assert(subkey->sk_flags & SK_ROW_MEMBER);
+ addflags = indoption[subkey->sk_attno - 1] << SK_BT_INDOPTION_SHIFT;
+ if ((addflags & SK_BT_DESC) && !(subkey->sk_flags & SK_BT_DESC))
+ subkey->sk_strategy = BTCommuteStrategyNumber(subkey->sk_strategy);
+ subkey->sk_flags |= addflags;
+ if (subkey->sk_flags & SK_ROW_END)
+ break;
+ subkey++;
+ }
+ }
+
+ return true;
+}
+
+/*
+ * Mark a scankey as "required to continue the scan".
+ *
+ * Depending on the operator type, the key may be required for both scan
+ * directions or just one. Also, if the key is a row comparison header,
+ * we have to mark its first subsidiary ScanKey as required. (Subsequent
+ * subsidiary ScanKeys are normally for lower-order columns, and thus
+ * cannot be required, since they're after the first non-equality scankey.)
+ *
+ * Note: when we set required-key flag bits in a subsidiary scankey, we are
+ * scribbling on a data structure belonging to the index AM's caller, not on
+ * our private copy. This should be OK because the marking will not change
+ * from scan to scan within a query, and so we'd just re-mark the same way
+ * anyway on a rescan. Something to keep an eye on though.
+ */
+static void
+_bt_mark_scankey_required(ScanKey skey)
+{
+ int addflags;
+
+ switch (skey->sk_strategy)
+ {
+ case BTLessStrategyNumber:
+ case BTLessEqualStrategyNumber:
+ addflags = SK_BT_REQFWD;
+ break;
+ case BTEqualStrategyNumber:
+ addflags = SK_BT_REQFWD | SK_BT_REQBKWD;
+ break;
+ case BTGreaterEqualStrategyNumber:
+ case BTGreaterStrategyNumber:
+ addflags = SK_BT_REQBKWD;
+ break;
+ default:
+ elog(ERROR, "unrecognized StrategyNumber: %d",
+ (int) skey->sk_strategy);
+ addflags = 0; /* keep compiler quiet */
+ break;
+ }
+
+ skey->sk_flags |= addflags;
+
+ if (skey->sk_flags & SK_ROW_HEADER)
+ {
+ ScanKey subkey = (ScanKey) DatumGetPointer(skey->sk_argument);
+
+ /* First subkey should be same column/operator as the header */
+ Assert(subkey->sk_flags & SK_ROW_MEMBER);
+ Assert(subkey->sk_attno == skey->sk_attno);
+ Assert(subkey->sk_strategy == skey->sk_strategy);
+ subkey->sk_flags |= addflags;
+ }
+}
+
+/*
+ * Test whether an indextuple satisfies all the scankey conditions.
+ *
+ * If so, return the address of the index tuple on the index page.
+ * If not, return NULL.
+ *
+ * If the tuple fails to pass the qual, we also determine whether there's
+ * any need to continue the scan beyond this tuple, and set *continuescan
* accordingly. See comments for _bt_preprocess_keys(), above, about how
* this is done.
+ *
+ * scan: index scan descriptor (containing a search-type scankey)
+ * page: buffer page containing index tuple
+ * offnum: offset number of index tuple (must be a valid item!)
+ * dir: direction we are scanning in
+ * continuescan: output parameter (will be set correctly in all cases)
+ *
+ * Caller must hold pin and lock on the index page.
*/
-bool
-_bt_checkkeys(IndexScanDesc scan, IndexTuple tuple,
+IndexTuple
+_bt_checkkeys(IndexScanDesc scan,
+ Page page, OffsetNumber offnum,
ScanDirection dir, bool *continuescan)
{
- BTScanOpaque so = (BTScanOpaque) scan->opaque;
- int keysz = so->numberOfKeys;
- int ikey;
+ ItemId iid = PageGetItemId(page, offnum);
+ bool tuple_alive;
+ IndexTuple tuple;
TupleDesc tupdesc;
+ BTScanOpaque so;
+ int keysz;
+ int ikey;
ScanKey key;
- *continuescan = true;
+ *continuescan = true; /* default assumption */
- /* If no keys, always scan the whole index */
- if (keysz == 0)
- return true;
+ /*
+ * If the scan specifies not to return killed tuples, then we treat a
+ * killed tuple as not passing the qual. Most of the time, it's a win to
+ * not bother examining the tuple's index keys, but just return
+ * immediately with continuescan = true to proceed to the next tuple.
+ * However, if this is the last tuple on the page, we should check the
+ * index keys to prevent uselessly advancing to the next page.
+ */
+ if (scan->ignore_killed_tuples && ItemIdIsDead(iid))
+ {
+ /* return immediately if there are more tuples on the page */
+ if (ScanDirectionIsForward(dir))
+ {
+ if (offnum < PageGetMaxOffsetNumber(page))
+ return NULL;
+ }
+ else
+ {
+ BTPageOpaque opaque = (BTPageOpaque) PageGetSpecialPointer(page);
- IncrIndexProcessed();
+ if (offnum > P_FIRSTDATAKEY(opaque))
+ return NULL;
+ }
+
+ /*
+ * OK, we want to check the keys so we can set continuescan correctly,
+ * but we'll return NULL even if the tuple passes the key tests.
+ */
+ tuple_alive = false;
+ }
+ else
+ tuple_alive = true;
+
+ tuple = (IndexTuple) PageGetItem(page, iid);
tupdesc = RelationGetDescr(scan->indexRelation);
+ so = (BTScanOpaque) scan->opaque;
+ keysz = so->numberOfKeys;
for (key = so->keyData, ikey = 0; ikey < keysz; key++, ikey++)
{
bool isNull;
Datum test;
+ Assert(key->sk_attno <= BTreeTupleGetNAtts(tuple, scan->indexRelation));
+ /* row-comparison keys need special processing */
+ if (key->sk_flags & SK_ROW_HEADER)
+ {
+ if (_bt_check_rowcompare(key, tuple, tupdesc, dir, continuescan))
+ continue;
+ return NULL;
+ }
+
datum = index_getattr(tuple,
key->sk_attno,
tupdesc,
&isNull);
- /* btree doesn't support 'A is null' clauses, yet */
if (key->sk_flags & SK_ISNULL)
{
- /* we shouldn't get here, really; see _bt_preprocess_keys() */
- *continuescan = false;
- return false;
- }
+ /* Handle IS NULL/NOT NULL tests */
+ if (key->sk_flags & SK_SEARCHNULL)
+ {
+ if (isNull)
+ continue; /* tuple satisfies this qual */
+ }
+ else
+ {
+ Assert(key->sk_flags & SK_SEARCHNOTNULL);
+ if (!isNull)
+ continue; /* tuple satisfies this qual */
+ }
- if (isNull)
- {
/*
- * Since NULLs are sorted after non-NULLs, we know we have
- * reached the upper limit of the range of values for this
- * index attr. On a forward scan, we can stop if this qual is
- * one of the "must match" subset. On a backward scan,
- * however, we should keep going.
+ * Tuple fails this qual. If it's a required qual for the current
+ * scan direction, then we can conclude no further tuples will
+ * pass, either.
*/
- if (ikey < so->numberOfRequiredKeys &&
+ if ((key->sk_flags & SK_BT_REQFWD) &&
ScanDirectionIsForward(dir))
*continuescan = false;
+ else if ((key->sk_flags & SK_BT_REQBKWD) &&
+ ScanDirectionIsBackward(dir))
+ *continuescan = false;
/*
* In any case, this indextuple doesn't match the qual.
*/
- return false;
+ return NULL;
}
- test = FunctionCall2(&key->sk_func, datum, key->sk_argument);
+ if (isNull)
+ {
+ if (key->sk_flags & SK_BT_NULLS_FIRST)
+ {
+ /*
+ * Since NULLs are sorted before non-NULLs, we know we have
+ * reached the lower limit of the range of values for this
+ * index attr. On a backward scan, we can stop if this qual
+ * is one of the "must match" subset. We can stop regardless
+ * of whether the qual is > or <, so long as it's required,
+ * because it's not possible for any future tuples to pass. On
+ * a forward scan, however, we must keep going, because we may
+ * have initially positioned to the start of the index.
+ */
+ if ((key->sk_flags & (SK_BT_REQFWD | SK_BT_REQBKWD)) &&
+ ScanDirectionIsBackward(dir))
+ *continuescan = false;
+ }
+ else
+ {
+ /*
+ * Since NULLs are sorted after non-NULLs, we know we have
+ * reached the upper limit of the range of values for this
+ * index attr. On a forward scan, we can stop if this qual is
+ * one of the "must match" subset. We can stop regardless of
+ * whether the qual is > or <, so long as it's required,
+ * because it's not possible for any future tuples to pass. On
+ * a backward scan, however, we must keep going, because we
+ * may have initially positioned to the end of the index.
+ */
+ if ((key->sk_flags & (SK_BT_REQFWD | SK_BT_REQBKWD)) &&
+ ScanDirectionIsForward(dir))
+ *continuescan = false;
+ }
+
+ /*
+ * In any case, this indextuple doesn't match the qual.
+ */
+ return NULL;
+ }
+
+ test = FunctionCall2Coll(&key->sk_func, key->sk_collation,
+ datum, key->sk_argument);
if (!DatumGetBool(test))
{
/*
- * Tuple fails this qual. If it's a required qual, then we
- * may be able to conclude no further tuples will pass, either.
- * We have to look at the scan direction and the qual type.
- *
- * Note: the only case in which we would keep going after failing
- * a required qual is if there are partially-redundant quals that
- * _bt_preprocess_keys() was unable to eliminate. For example,
- * given "x > 4 AND x > 10" where both are cross-type comparisons
- * and so not removable, we might start the scan at the x = 4
- * boundary point. The "x > 10" condition will fail until we
- * pass x = 10, but we must not stop the scan on its account.
+ * Tuple fails this qual. If it's a required qual for the current
+ * scan direction, then we can conclude no further tuples will
+ * pass, either.
*
* Note: because we stop the scan as soon as any required equality
* qual fails, it is critical that equality quals be used for the
- * initial positioning in _bt_first() when they are available.
- * See comments in _bt_first().
+ * initial positioning in _bt_first() when they are available. See
+ * comments in _bt_first().
+ */
+ if ((key->sk_flags & SK_BT_REQFWD) &&
+ ScanDirectionIsForward(dir))
+ *continuescan = false;
+ else if ((key->sk_flags & SK_BT_REQBKWD) &&
+ ScanDirectionIsBackward(dir))
+ *continuescan = false;
+
+ /*
+ * In any case, this indextuple doesn't match the qual.
*/
- if (ikey < so->numberOfRequiredKeys)
+ return NULL;
+ }
+ }
+
+ /* Check for failure due to it being a killed tuple. */
+ if (!tuple_alive)
+ return NULL;
+
+ /* If we get here, the tuple passes all index quals. */
+ return tuple;
+}
+
+/*
+ * Test whether an indextuple satisfies a row-comparison scan condition.
+ *
+ * Return true if so, false if not. If not, also clear *continuescan if
+ * it's not possible for any future tuples in the current scan direction
+ * to pass the qual.
+ *
+ * This is a subroutine for _bt_checkkeys, which see for more info.
+ */
+static bool
+_bt_check_rowcompare(ScanKey skey, IndexTuple tuple, TupleDesc tupdesc,
+ ScanDirection dir, bool *continuescan)
+{
+ ScanKey subkey = (ScanKey) DatumGetPointer(skey->sk_argument);
+ int32 cmpresult = 0;
+ bool result;
+
+ /* First subkey should be same as the header says */
+ Assert(subkey->sk_attno == skey->sk_attno);
+
+ /* Loop over columns of the row condition */
+ for (;;)
+ {
+ Datum datum;
+ bool isNull;
+
+ Assert(subkey->sk_flags & SK_ROW_MEMBER);
+
+ datum = index_getattr(tuple,
+ subkey->sk_attno,
+ tupdesc,
+ &isNull);
+
+ if (isNull)
+ {
+ if (subkey->sk_flags & SK_BT_NULLS_FIRST)
{
- switch (key->sk_strategy)
- {
- case BTLessStrategyNumber:
- case BTLessEqualStrategyNumber:
- if (ScanDirectionIsForward(dir))
- *continuescan = false;
- break;
- case BTEqualStrategyNumber:
- *continuescan = false;
- break;
- case BTGreaterEqualStrategyNumber:
- case BTGreaterStrategyNumber:
- if (ScanDirectionIsBackward(dir))
- *continuescan = false;
- break;
- default:
- elog(ERROR, "unrecognized StrategyNumber: %d",
- key->sk_strategy);
- }
+ /*
+ * Since NULLs are sorted before non-NULLs, we know we have
+ * reached the lower limit of the range of values for this
+ * index attr. On a backward scan, we can stop if this qual
+ * is one of the "must match" subset. We can stop regardless
+ * of whether the qual is > or <, so long as it's required,
+ * because it's not possible for any future tuples to pass. On
+ * a forward scan, however, we must keep going, because we may
+ * have initially positioned to the start of the index.
+ */
+ if ((subkey->sk_flags & (SK_BT_REQFWD | SK_BT_REQBKWD)) &&
+ ScanDirectionIsBackward(dir))
+ *continuescan = false;
+ }
+ else
+ {
+ /*
+ * Since NULLs are sorted after non-NULLs, we know we have
+ * reached the upper limit of the range of values for this
+ * index attr. On a forward scan, we can stop if this qual is
+ * one of the "must match" subset. We can stop regardless of
+ * whether the qual is > or <, so long as it's required,
+ * because it's not possible for any future tuples to pass. On
+ * a backward scan, however, we must keep going, because we
+ * may have initially positioned to the end of the index.
+ */
+ if ((subkey->sk_flags & (SK_BT_REQFWD | SK_BT_REQBKWD)) &&
+ ScanDirectionIsForward(dir))
+ *continuescan = false;
}
/*
*/
return false;
}
+
+ if (subkey->sk_flags & SK_ISNULL)
+ {
+ /*
+ * Unlike the simple-scankey case, this isn't a disallowed case.
+ * But it can never match. If all the earlier row comparison
+ * columns are required for the scan direction, we can stop the
+ * scan, because there can't be another tuple that will succeed.
+ */
+ if (subkey != (ScanKey) DatumGetPointer(skey->sk_argument))
+ subkey--;
+ if ((subkey->sk_flags & SK_BT_REQFWD) &&
+ ScanDirectionIsForward(dir))
+ *continuescan = false;
+ else if ((subkey->sk_flags & SK_BT_REQBKWD) &&
+ ScanDirectionIsBackward(dir))
+ *continuescan = false;
+ return false;
+ }
+
+ /* Perform the test --- three-way comparison not bool operator */
+ cmpresult = DatumGetInt32(FunctionCall2Coll(&subkey->sk_func,
+ subkey->sk_collation,
+ datum,
+ subkey->sk_argument));
+
+ if (subkey->sk_flags & SK_BT_DESC)
+ cmpresult = -cmpresult;
+
+ /* Done comparing if unequal, else advance to next column */
+ if (cmpresult != 0)
+ break;
+
+ if (subkey->sk_flags & SK_ROW_END)
+ break;
+ subkey++;
+ }
+
+ /*
+ * At this point cmpresult indicates the overall result of the row
+ * comparison, and subkey points to the deciding column (or the last
+ * column if the result is "=").
+ */
+ switch (subkey->sk_strategy)
+ {
+ /* EQ and NE cases aren't allowed here */
+ case BTLessStrategyNumber:
+ result = (cmpresult < 0);
+ break;
+ case BTLessEqualStrategyNumber:
+ result = (cmpresult <= 0);
+ break;
+ case BTGreaterEqualStrategyNumber:
+ result = (cmpresult >= 0);
+ break;
+ case BTGreaterStrategyNumber:
+ result = (cmpresult > 0);
+ break;
+ default:
+ elog(ERROR, "unrecognized RowCompareType: %d",
+ (int) subkey->sk_strategy);
+ result = 0; /* keep compiler quiet */
+ break;
+ }
+
+ if (!result)
+ {
+ /*
+ * Tuple fails this qual. If it's a required qual for the current
+ * scan direction, then we can conclude no further tuples will pass,
+ * either. Note we have to look at the deciding column, not
+ * necessarily the first or last column of the row condition.
+ */
+ if ((subkey->sk_flags & SK_BT_REQFWD) &&
+ ScanDirectionIsForward(dir))
+ *continuescan = false;
+ else if ((subkey->sk_flags & SK_BT_REQBKWD) &&
+ ScanDirectionIsBackward(dir))
+ *continuescan = false;
+ }
+
+ return result;
+}
+
+/*
+ * _bt_killitems - set LP_DEAD state for items an indexscan caller has
+ * told us were killed
+ *
+ * scan->opaque, referenced locally through so, contains information about the
+ * current page and killed tuples thereon (generally, this should only be
+ * called if so->numKilled > 0).
+ *
+ * The caller does not have a lock on the page and may or may not have the
+ * page pinned in a buffer. Note that read-lock is sufficient for setting
+ * LP_DEAD status (which is only a hint).
+ *
+ * We match items by heap TID before assuming they are the right ones to
+ * delete. We cope with cases where items have moved right due to insertions.
+ * If an item has moved off the current page due to a split, we'll fail to
+ * find it and do nothing (this is not an error case --- we assume the item
+ * will eventually get marked in a future indexscan).
+ *
+ * Note that if we hold a pin on the target page continuously from initially
+ * reading the items until applying this function, VACUUM cannot have deleted
+ * any items from the page, and so there is no need to search left from the
+ * recorded offset. (This observation also guarantees that the item is still
+ * the right one to delete, which might otherwise be questionable since heap
+ * TIDs can get recycled.) This holds true even if the page has been modified
+ * by inserts and page splits, so there is no need to consult the LSN.
+ *
+ * If the pin was released after reading the page, then we re-read it. If it
+ * has been modified since we read it (as determined by the LSN), we dare not
+ * flag any entries because it is possible that the old entry was vacuumed
+ * away and the TID was re-used by a completely different heap tuple.
+ */
+void
+_bt_killitems(IndexScanDesc scan)
+{
+ BTScanOpaque so = (BTScanOpaque) scan->opaque;
+ Page page;
+ BTPageOpaque opaque;
+ OffsetNumber minoff;
+ OffsetNumber maxoff;
+ int i;
+ int numKilled = so->numKilled;
+ bool killedsomething = false;
+
+ Assert(BTScanPosIsValid(so->currPos));
+
+ /*
+ * Always reset the scan state, so we don't look for same items on other
+ * pages.
+ */
+ so->numKilled = 0;
+
+ if (BTScanPosIsPinned(so->currPos))
+ {
+ /*
+ * We have held the pin on this page since we read the index tuples,
+ * so all we need to do is lock it. The pin will have prevented
+ * re-use of any TID on the page, so there is no need to check the
+ * LSN.
+ */
+ LockBuffer(so->currPos.buf, BT_READ);
+
+ page = BufferGetPage(so->currPos.buf);
+ }
+ else
+ {
+ Buffer buf;
+
+ /* Attempt to re-read the buffer, getting pin and lock. */
+ buf = _bt_getbuf(scan->indexRelation, so->currPos.currPage, BT_READ);
+
+ /* It might not exist anymore; in which case we can't hint it. */
+ if (!BufferIsValid(buf))
+ return;
+
+ page = BufferGetPage(buf);
+ if (BufferGetLSNAtomic(buf) == so->currPos.lsn)
+ so->currPos.buf = buf;
+ else
+ {
+ /* Modified while not pinned means hinting is not safe. */
+ _bt_relbuf(scan->indexRelation, buf);
+ return;
+ }
}
- /* If we get here, the tuple passes all quals. */
- return true;
+ opaque = (BTPageOpaque) PageGetSpecialPointer(page);
+ minoff = P_FIRSTDATAKEY(opaque);
+ maxoff = PageGetMaxOffsetNumber(page);
+
+ for (i = 0; i < numKilled; i++)
+ {
+ int itemIndex = so->killedItems[i];
+ BTScanPosItem *kitem = &so->currPos.items[itemIndex];
+ OffsetNumber offnum = kitem->indexOffset;
+
+ Assert(itemIndex >= so->currPos.firstItem &&
+ itemIndex <= so->currPos.lastItem);
+ if (offnum < minoff)
+ continue; /* pure paranoia */
+ while (offnum <= maxoff)
+ {
+ ItemId iid = PageGetItemId(page, offnum);
+ IndexTuple ituple = (IndexTuple) PageGetItem(page, iid);
+
+ if (ItemPointerEquals(&ituple->t_tid, &kitem->heapTid))
+ {
+ /* found the item */
+ ItemIdMarkDead(iid);
+ killedsomething = true;
+ break; /* out of inner search loop */
+ }
+ offnum = OffsetNumberNext(offnum);
+ }
+ }
+
+ /*
+ * Since this can be redone later if needed, mark as dirty hint.
+ *
+ * Whenever we mark anything LP_DEAD, we also set the page's
+ * BTP_HAS_GARBAGE flag, which is likewise just a hint.
+ */
+ if (killedsomething)
+ {
+ opaque->btpo_flags |= BTP_HAS_GARBAGE;
+ MarkBufferDirtyHint(so->currPos.buf, true);
+ }
+
+ LockBuffer(so->currPos.buf, BUFFER_LOCK_UNLOCK);
+}
+
+
+/*
+ * The following routines manage a shared-memory area in which we track
+ * assignment of "vacuum cycle IDs" to currently-active btree vacuuming
+ * operations. There is a single counter which increments each time we
+ * start a vacuum to assign it a cycle ID. Since multiple vacuums could
+ * be active concurrently, we have to track the cycle ID for each active
+ * vacuum; this requires at most MaxBackends entries (usually far fewer).
+ * We assume at most one vacuum can be active for a given index.
+ *
+ * Access to the shared memory area is controlled by BtreeVacuumLock.
+ * In principle we could use a separate lmgr locktag for each index,
+ * but a single LWLock is much cheaper, and given the short time that
+ * the lock is ever held, the concurrency hit should be minimal.
+ */
+
+typedef struct BTOneVacInfo
+{
+ LockRelId relid; /* global identifier of an index */
+ BTCycleId cycleid; /* cycle ID for its active VACUUM */
+} BTOneVacInfo;
+
+typedef struct BTVacInfo
+{
+ BTCycleId cycle_ctr; /* cycle ID most recently assigned */
+ int num_vacuums; /* number of currently active VACUUMs */
+ int max_vacuums; /* allocated length of vacuums[] array */
+ BTOneVacInfo vacuums[FLEXIBLE_ARRAY_MEMBER];
+} BTVacInfo;
+
+static BTVacInfo *btvacinfo;
+
+
+/*
+ * _bt_vacuum_cycleid --- get the active vacuum cycle ID for an index,
+ * or zero if there is no active VACUUM
+ *
+ * Note: for correct interlocking, the caller must already hold pin and
+ * exclusive lock on each buffer it will store the cycle ID into. This
+ * ensures that even if a VACUUM starts immediately afterwards, it cannot
+ * process those pages until the page split is complete.
+ */
+BTCycleId
+_bt_vacuum_cycleid(Relation rel)
+{
+ BTCycleId result = 0;
+ int i;
+
+ /* Share lock is enough since this is a read-only operation */
+ LWLockAcquire(BtreeVacuumLock, LW_SHARED);
+
+ for (i = 0; i < btvacinfo->num_vacuums; i++)
+ {
+ BTOneVacInfo *vac = &btvacinfo->vacuums[i];
+
+ if (vac->relid.relId == rel->rd_lockInfo.lockRelId.relId &&
+ vac->relid.dbId == rel->rd_lockInfo.lockRelId.dbId)
+ {
+ result = vac->cycleid;
+ break;
+ }
+ }
+
+ LWLockRelease(BtreeVacuumLock);
+ return result;
+}
+
+/*
+ * _bt_start_vacuum --- assign a cycle ID to a just-starting VACUUM operation
+ *
+ * Note: the caller must guarantee that it will eventually call
+ * _bt_end_vacuum, else we'll permanently leak an array slot. To ensure
+ * that this happens even in elog(FATAL) scenarios, the appropriate coding
+ * is not just a PG_TRY, but
+ * PG_ENSURE_ERROR_CLEANUP(_bt_end_vacuum_callback, PointerGetDatum(rel))
+ */
+BTCycleId
+_bt_start_vacuum(Relation rel)
+{
+ BTCycleId result;
+ int i;
+ BTOneVacInfo *vac;
+
+ LWLockAcquire(BtreeVacuumLock, LW_EXCLUSIVE);
+
+ /*
+ * Assign the next cycle ID, being careful to avoid zero as well as the
+ * reserved high values.
+ */
+ result = ++(btvacinfo->cycle_ctr);
+ if (result == 0 || result > MAX_BT_CYCLE_ID)
+ result = btvacinfo->cycle_ctr = 1;
+
+ /* Let's just make sure there's no entry already for this index */
+ for (i = 0; i < btvacinfo->num_vacuums; i++)
+ {
+ vac = &btvacinfo->vacuums[i];
+ if (vac->relid.relId == rel->rd_lockInfo.lockRelId.relId &&
+ vac->relid.dbId == rel->rd_lockInfo.lockRelId.dbId)
+ {
+ /*
+ * Unlike most places in the backend, we have to explicitly
+ * release our LWLock before throwing an error. This is because
+ * we expect _bt_end_vacuum() to be called before transaction
+ * abort cleanup can run to release LWLocks.
+ */
+ LWLockRelease(BtreeVacuumLock);
+ elog(ERROR, "multiple active vacuums for index \"%s\"",
+ RelationGetRelationName(rel));
+ }
+ }
+
+ /* OK, add an entry */
+ if (btvacinfo->num_vacuums >= btvacinfo->max_vacuums)
+ {
+ LWLockRelease(BtreeVacuumLock);
+ elog(ERROR, "out of btvacinfo slots");
+ }
+ vac = &btvacinfo->vacuums[btvacinfo->num_vacuums];
+ vac->relid = rel->rd_lockInfo.lockRelId;
+ vac->cycleid = result;
+ btvacinfo->num_vacuums++;
+
+ LWLockRelease(BtreeVacuumLock);
+ return result;
+}
+
+/*
+ * _bt_end_vacuum --- mark a btree VACUUM operation as done
+ *
+ * Note: this is deliberately coded not to complain if no entry is found;
+ * this allows the caller to put PG_TRY around the start_vacuum operation.
+ */
+void
+_bt_end_vacuum(Relation rel)
+{
+ int i;
+
+ LWLockAcquire(BtreeVacuumLock, LW_EXCLUSIVE);
+
+ /* Find the array entry */
+ for (i = 0; i < btvacinfo->num_vacuums; i++)
+ {
+ BTOneVacInfo *vac = &btvacinfo->vacuums[i];
+
+ if (vac->relid.relId == rel->rd_lockInfo.lockRelId.relId &&
+ vac->relid.dbId == rel->rd_lockInfo.lockRelId.dbId)
+ {
+ /* Remove it by shifting down the last entry */
+ *vac = btvacinfo->vacuums[btvacinfo->num_vacuums - 1];
+ btvacinfo->num_vacuums--;
+ break;
+ }
+ }
+
+ LWLockRelease(BtreeVacuumLock);
+}
+
+/*
+ * _bt_end_vacuum wrapped as an on_shmem_exit callback function
+ */
+void
+_bt_end_vacuum_callback(int code, Datum arg)
+{
+ _bt_end_vacuum((Relation) DatumGetPointer(arg));
+}
+
+/*
+ * BTreeShmemSize --- report amount of shared memory space needed
+ */
+Size
+BTreeShmemSize(void)
+{
+ Size size;
+
+ size = offsetof(BTVacInfo, vacuums);
+ size = add_size(size, mul_size(MaxBackends, sizeof(BTOneVacInfo)));
+ return size;
+}
+
+/*
+ * BTreeShmemInit --- initialize this module's shared memory
+ */
+void
+BTreeShmemInit(void)
+{
+ bool found;
+
+ btvacinfo = (BTVacInfo *) ShmemInitStruct("BTree Vacuum State",
+ BTreeShmemSize(),
+ &found);
+
+ if (!IsUnderPostmaster)
+ {
+ /* Initialize shared memory area */
+ Assert(!found);
+
+ /*
+ * It doesn't really matter what the cycle counter starts at, but
+ * having it always start the same doesn't seem good. Seed with
+ * low-order bits of time() instead.
+ */
+ btvacinfo->cycle_ctr = (BTCycleId) time(NULL);
+
+ btvacinfo->num_vacuums = 0;
+ btvacinfo->max_vacuums = MaxBackends;
+ }
+ else
+ Assert(found);
+}
+
+bytea *
+btoptions(Datum reloptions, bool validate)
+{
+ return default_reloptions(reloptions, validate, RELOPT_KIND_BTREE);
+}
+
+/*
+ * btproperty() -- Check boolean properties of indexes.
+ *
+ * This is optional, but handling AMPROP_RETURNABLE here saves opening the rel
+ * to call btcanreturn.
+ */
+bool
+btproperty(Oid index_oid, int attno,
+ IndexAMProperty prop, const char *propname,
+ bool *res, bool *isnull)
+{
+ switch (prop)
+ {
+ case AMPROP_RETURNABLE:
+ /* answer only for columns, not AM or whole index */
+ if (attno == 0)
+ return false;
+ /* otherwise, btree can always return data */
+ *res = true;
+ return true;
+
+ default:
+ return false; /* punt to generic code */
+ }
+}
+
+/*
+ * _bt_nonkey_truncate() -- create tuple without non-key suffix attributes.
+ *
+ * Returns truncated index tuple allocated in caller's memory context, with key
+ * attributes copied from caller's itup argument. Currently, suffix truncation
+ * is only performed to create pivot tuples in INCLUDE indexes, but some day it
+ * could be generalized to remove suffix attributes after the first
+ * distinguishing key attribute.
+ *
+ * Truncated tuple is guaranteed to be no larger than the original, which is
+ * important for staying under the 1/3 of a page restriction on tuple size.
+ *
+ * Note that returned tuple's t_tid offset will hold the number of attributes
+ * present, so the original item pointer offset is not represented. Caller
+ * should only change truncated tuple's downlink.
+ */
+IndexTuple
+_bt_nonkey_truncate(Relation rel, IndexTuple itup)
+{
+ int nkeyattrs = IndexRelationGetNumberOfKeyAttributes(rel);
+ IndexTuple truncated;
+
+ /*
+ * We should only ever truncate leaf index tuples, which must have both key
+ * and non-key attributes. It's never okay to truncate a second time.
+ */
+ Assert(BTreeTupleGetNAtts(itup, rel) ==
+ IndexRelationGetNumberOfAttributes(rel));
+
+ truncated = index_truncate_tuple(RelationGetDescr(rel), itup, nkeyattrs);
+ BTreeTupleSetNAtts(truncated, nkeyattrs);
+
+ return truncated;
+}
+
+/*
+ * _bt_check_natts() -- Verify tuple has expected number of attributes.
+ *
+ * Returns value indicating if the expected number of attributes were found
+ * for a particular offset on page. This can be used as a general purpose
+ * sanity check.
+ *
+ * Testing a tuple directly with BTreeTupleGetNAtts() should generally be
+ * preferred to calling here. That's usually more convenient, and is always
+ * more explicit. Call here instead when offnum's tuple may be a negative
+ * infinity tuple that uses the pre-v11 on-disk representation, or when a low
+ * context check is appropriate.
+ */
+bool
+_bt_check_natts(Relation rel, Page page, OffsetNumber offnum)
+{
+ int16 natts = IndexRelationGetNumberOfAttributes(rel);
+ int16 nkeyatts = IndexRelationGetNumberOfKeyAttributes(rel);
+ BTPageOpaque opaque = (BTPageOpaque) PageGetSpecialPointer(page);
+ IndexTuple itup;
+
+ /*
+ * We cannot reliably test a deleted or half-deleted page, since they have
+ * dummy high keys
+ */
+ if (P_IGNORE(opaque))
+ return true;
+
+ Assert(offnum >= FirstOffsetNumber &&
+ offnum <= PageGetMaxOffsetNumber(page));
+ /*
+ * Mask allocated for number of keys in index tuple must be able to fit
+ * maximum possible number of index attributes
+ */
+ StaticAssertStmt(BT_N_KEYS_OFFSET_MASK >= INDEX_MAX_KEYS,
+ "BT_N_KEYS_OFFSET_MASK can't fit INDEX_MAX_KEYS");
+
+ itup = (IndexTuple) PageGetItem(page, PageGetItemId(page, offnum));
+
+ if (P_ISLEAF(opaque))
+ {
+ if (offnum >= P_FIRSTDATAKEY(opaque))
+ {
+ /*
+ * Leaf tuples that are not the page high key (non-pivot tuples)
+ * should never be truncated
+ */
+ return BTreeTupleGetNAtts(itup, rel) == natts;
+ }
+ else
+ {
+ /*
+ * Rightmost page doesn't contain a page high key, so tuple was
+ * checked above as ordinary leaf tuple
+ */
+ Assert(!P_RIGHTMOST(opaque));
+
+ /* Page high key tuple contains only key attributes */
+ return BTreeTupleGetNAtts(itup, rel) == nkeyatts;
+ }
+ }
+ else /* !P_ISLEAF(opaque) */
+ {
+ if (offnum == P_FIRSTDATAKEY(opaque))
+ {
+ /*
+ * The first tuple on any internal page (possibly the first after
+ * its high key) is its negative infinity tuple. Negative infinity
+ * tuples are always truncated to zero attributes. They are a
+ * particular kind of pivot tuple.
+ *
+ * The number of attributes won't be explicitly represented if the
+ * negative infinity tuple was generated during a page split that
+ * occurred with a version of Postgres before v11. There must be a
+ * problem when there is an explicit representation that is
+ * non-zero, or when there is no explicit representation and the
+ * tuple is evidently not a pre-pg_upgrade tuple.
+ *
+ * Prior to v11, downlinks always had P_HIKEY as their offset. Use
+ * that to decide if the tuple is a pre-v11 tuple.
+ */
+ return BTreeTupleGetNAtts(itup, rel) == 0 ||
+ ((itup->t_info & INDEX_ALT_TID_MASK) == 0 &&
+ ItemPointerGetOffsetNumber(&(itup->t_tid)) == P_HIKEY);
+ }
+ else
+ {
+ /*
+ * Tuple contains only key attributes despite on is it page high
+ * key or not
+ */
+ return BTreeTupleGetNAtts(itup, rel) == nkeyatts;
+ }
+
+ }
}