# -*-makefile-*-
-# $PostgreSQL: pgsql/src/Makefile.global.in,v 1.186 2004/05/21 20:56:48 tgl Exp $
+# $PostgreSQL: pgsql/src/Makefile.global.in,v 1.254 2009/06/23 03:46:00 tgl Exp $
#------------------------------------------------------------------------------
# All PostgreSQL makefiles include this file and use the variables it sets,
#
# Meta configuration
-.PHONY: all install install-strip installdirs uninstall clean distclean maintainer-clean distprep check installcheck maintainer-check
+.PHONY: all install install-strip installdirs uninstall clean distclean maintainer-clean distprep check installcheck maintainer-check coverage
.SILENT: installdirs
# make `all' the default target
# PostgreSQL version number
VERSION = @PACKAGE_VERSION@
+MAJORVERSION = @PG_MAJORVERSION@
# Support for VPATH builds
vpath_build = @vpath_build@
##########################################################################
#
# Installation directories
+#
+# These are set by the equivalent --xxxdir configure options. We
+# append "postgresql" to some of them, if the string does not already
+# contain "pgsql" or "postgres", in order to avoid directory clutter.
+#
+# In a PGXS build, we cannot use the values inserted into Makefile.global
+# by configure, since the installation tree may have been relocated.
+# Instead get the path values from pg_config.
+
+ifndef PGXS
+
+# Note that prefix, exec_prefix, and datarootdir aren't defined in a PGXS build;
+# makefiles may only use the derived variables such as bindir.
prefix := @prefix@
exec_prefix := @exec_prefix@
+datarootdir := @datarootdir@
bindir := @bindir@
-sbindir := @sbindir@
-libexecdir := @libexecdir@
datadir := @datadir@
+ifeq "$(findstring pgsql, $(datadir))" ""
+ifeq "$(findstring postgres, $(datadir))" ""
+override datadir := $(datadir)/postgresql
+endif
+endif
+
sysconfdir := @sysconfdir@
+ifeq "$(findstring pgsql, $(sysconfdir))" ""
+ifeq "$(findstring postgres, $(sysconfdir))" ""
+override sysconfdir := $(sysconfdir)/postgresql
+endif
+endif
libdir := @libdir@
-pkglibdir := @pkglibdir@
+
+pkglibdir = $(libdir)
+ifeq "$(findstring pgsql, $(pkglibdir))" ""
+ifeq "$(findstring postgres, $(pkglibdir))" ""
+override pkglibdir := $(pkglibdir)/postgresql
+endif
+endif
includedir := @includedir@
-pkgincludedir := @pkgincludedir@
-includedir_server = $(pkgincludedir)/server
-includedir_internal = $(pkgincludedir)/internal
+
+pkgincludedir = $(includedir)
+ifeq "$(findstring pgsql, $(pkgincludedir))" ""
+ifeq "$(findstring postgres, $(pkgincludedir))" ""
+override pkgincludedir := $(pkgincludedir)/postgresql
+endif
+endif
mandir := @mandir@
-sqlmansect_dummy = l
docdir := @docdir@
+ifeq "$(findstring pgsql, $(docdir))" ""
+ifeq "$(findstring postgres, $(docdir))" ""
+override docdir := $(docdir)/postgresql
+endif
+endif
+
+htmldir := @htmldir@
localedir := @localedir@
+else # PGXS case
+
+# Extension makefiles should set PG_CONFIG, but older ones might not
+ifndef PG_CONFIG
+PG_CONFIG = pg_config
+endif
+
+bindir := $(shell $(PG_CONFIG) --bindir)
+datadir := $(shell $(PG_CONFIG) --sharedir)
+sysconfdir := $(shell $(PG_CONFIG) --sysconfdir)
+libdir := $(shell $(PG_CONFIG) --libdir)
+pkglibdir := $(shell $(PG_CONFIG) --pkglibdir)
+includedir := $(shell $(PG_CONFIG) --includedir)
+pkgincludedir := $(shell $(PG_CONFIG) --pkgincludedir)
+mandir := $(shell $(PG_CONFIG) --mandir)
+docdir := $(shell $(PG_CONFIG) --docdir)
+localedir := $(shell $(PG_CONFIG) --localedir)
+
+endif # PGXS
+
+# These derived path variables aren't separately configurable.
+
+includedir_server = $(pkgincludedir)/server
+includedir_internal = $(pkgincludedir)/internal
+pgxsdir = $(pkglibdir)/pgxs
+
##########################################################################
#
with_perl = @with_perl@
with_python = @with_python@
with_tcl = @with_tcl@
+with_openssl = @with_openssl@
+with_ossp_uuid = @with_ossp_uuid@
+with_libxml = @with_libxml@
+with_libxslt = @with_libxslt@
+with_system_tzdata = @with_system_tzdata@
+with_zlib = @with_zlib@
enable_shared = @enable_shared@
enable_rpath = @enable_rpath@
enable_nls = @enable_nls@
enable_debug = @enable_debug@
+enable_dtrace = @enable_dtrace@
+enable_coverage = @enable_coverage@
enable_thread_safety = @enable_thread_safety@
python_includespec = @python_includespec@
+python_libdir = @python_libdir@
python_libspec = @python_libspec@
+python_additional_libs = @python_additional_libs@
python_configdir = @python_configdir@
+python_version = @python_version@
krb_srvtab = @krb_srvtab@
TCL_SHARED_BUILD = @TCL_SHARED_BUILD@
TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@
-TK_LIBS = @TK_LIBS@
-TK_LIB_SPEC = @TK_LIB_SPEC@
-TK_XINCLUDES = @TK_XINCLUDES@
-
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LIBS = @PTHREAD_LIBS@
have_docbook = @have_docbook@
DOCBOOKSTYLE = @DOCBOOKSTYLE@
COLLATEINDEX = @COLLATEINDEX@
+DOCBOOK2MAN = @DOCBOOK2MAN@
##########################################################################
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
+
+ifdef PGXS
+override CPPFLAGS := -I$(includedir_server) -I$(includedir_internal) $(CPPFLAGS)
+else # not PGXS
override CPPFLAGS := -I$(top_srcdir)/src/include $(CPPFLAGS)
ifdef VPATH
override CPPFLAGS := -I$(top_builddir)/src/include $(CPPFLAGS)
endif
+endif # not PGXS
CC = @CC@
GCC = @GCC@
+SUN_STUDIO_CC = @SUN_STUDIO_CC@
CFLAGS = @CFLAGS@
-ifeq ($(GCC), yes)
- CFLAGS += -Wall -Wmissing-prototypes -Wmissing-declarations
-endif
# Kind-of compilers
-YACC = @YACC@
-YFLAGS = @YFLAGS@
+BISON = @BISON@
+BISONFLAGS = @BISONFLAGS@ $(YFLAGS)
FLEX = @FLEX@
FLEXFLAGS = @FLEXFLAGS@ $(LFLAGS)
+DTRACE = @DTRACE@
+DTRACEFLAGS = @DTRACEFLAGS@
+ZIC = @ZIC@
# Linking
+AR = @AR@
+DLLTOOL = @DLLTOOL@
+DLLWRAP = @DLLWRAP@
LIBS = @LIBS@
+LDAP_LIBS_FE = @LDAP_LIBS_FE@
+LDAP_LIBS_BE = @LDAP_LIBS_BE@
+OSSP_UUID_LIBS = @OSSP_UUID_LIBS@
LD = @LD@
with_gnu_ld = @with_gnu_ld@
ld_R_works = @ld_R_works@
LDFLAGS = @LDFLAGS@
+LDFLAGS_SL = @LDFLAGS_SL@
LDREL = -r
LDOUT = -o
RANLIB = @RANLIB@
-LORDER = @LORDER@
+WINDRES = @WINDRES@
X = @EXEEXT@
# Perl
-PERL = @PERL@
+ifneq (@PERL@,)
+ # quoted to protect pathname with spaces
+ PERL = "@PERL@"
+else
+ PERL = $(missing) perl
+endif
perl_archlibexp = @perl_archlibexp@
perl_privlibexp = @perl_privlibexp@
perl_useshrplib = @perl_useshrplib@
GZIP = gzip
BZIP2 = bzip2
+PL_TESTDB = pl_regression
+CONTRIB_TESTDB = contrib_regression
+
# Installation.
INSTALL = $(SHELL) $(top_srcdir)/config/install-sh -c
+INSTALL_SCRIPT_MODE = 755
+INSTALL_DATA_MODE = 644
INSTALL_PROGRAM = $(INSTALL_PROGRAM_ENV) $(INSTALL) $(INSTALL_STRIP_FLAG)
-INSTALL_SCRIPT = $(INSTALL) -m 755
-INSTALL_DATA = $(INSTALL) -m 644
+INSTALL_SCRIPT = $(INSTALL) -m $(INSTALL_SCRIPT_MODE)
+INSTALL_DATA = $(INSTALL) -m $(INSTALL_DATA_MODE)
INSTALL_STLIB = $(INSTALL_STLIB_ENV) $(INSTALL_DATA) $(INSTALL_STRIP_FLAG)
INSTALL_SHLIB = $(INSTALL_SHLIB_ENV) $(INSTALL) $(INSTALL_SHLIB_OPTS) $(INSTALL_STRIP_FLAG)
# Override in Makefile.port if necessary
NSGMLS = @NSGMLS@
SGMLSPL = @SGMLSPL@
+# Code coverage
+
+GCOV = @GCOV@
+LCOV = @LCOV@
+GENHTML = @GENHTML@
+
+ifeq ($(enable_coverage),yes)
+# ccache loses .gcno files
+export CCACHE_DISABLE = 1
+endif
+
# Feature settings
DEF_PGPORT = @default_port@
# Name of the "template"
PORTNAME= @PORTNAME@
+build_os = @build_os@
+
host_tuple = @host@
host_os = @host_os@
host_cpu = @host_cpu@
# systems now. May be applicable to other systems to?
ELF_SYSTEM= @ELF_SYS@
+# Backend stack size limit has to be hard-wired on Windows (it's in bytes)
+WIN32_STACK_RLIMIT=4194304
+
# Pull in platform-specific magic
include $(top_builddir)/src/Makefile.port
+# Set up rpath if enabled. By default it will point to our libdir,
+# but individual Makefiles can force other rpath paths if needed.
+rpathdir = $(libdir)
+
ifeq ($(enable_rpath), yes)
LDFLAGS += $(rpath)
endif
#
# Some variables needed to find some client interfaces
+ifdef PGXS
+# some contribs assumes headers and libs are in the source tree...
+libpq_srcdir = $(includedir)
+libpq_builddir = $(libdir)
+else
libpq_srcdir = $(top_srcdir)/src/interfaces/libpq
libpq_builddir = $(top_builddir)/src/interfaces/libpq
+endif
+
+# This macro is for use by libraries linking to libpq. (Because libpgport
+# isn't created with the same link flags as libpq, it can't be used.)
libpq = -L$(libpq_builddir) -lpq
+
+# If doing static linking, shared library dependency info isn't available,
+# so add in the libraries that libpq depends on.
+ifeq ($(enable_shared), no)
+libpq += $(filter -lintl -lssl -lcrypto -lkrb5 -lcrypt, $(LIBS)) \
+ $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
+endif
+
+# This macro is for use by client executables (not libraries) that use libpq.
+# We force clients to pull symbols from the non-shared library libpgport
+# rather than pulling some libpgport symbols from libpq just because
+# libpq uses those functions too. This makes applications less
+# dependent on changes in libpq's usage of pgport. To do this we link to
+# pgport before libpq. This does cause duplicate -lpgport's to appear
+# on client link lines.
+ifdef PGXS
+libpq_pgport = -L$(libdir) -lpgport $(libpq)
+else
+libpq_pgport = -L$(top_builddir)/src/port -lpgport $(libpq)
+endif
+
submake-libpq:
$(MAKE) -C $(libpq_builddir) all
endif
ifdef COPT
- CFLAGS+= $(COPT)
- LDFLAGS+= $(COPT)
+ CFLAGS += $(COPT)
+ LDFLAGS += $(COPT)
endif
ifdef PROFILE
- CFLAGS+= $(PROFILE)
- LDFLAGS+= $(PROFILE)
+ CFLAGS += $(PROFILE)
+ LDFLAGS += $(PROFILE)
endif
##########################################################################
#
-# substitute implementations of the C library
+# substitute implementations of C library routines (see src/port/)
-LIBOBJS = @LIBOBJS@ exec.o noblock.o path.o pipe.o pgsleep.o pgstrcasecmp.o sprompt.o thread.o
+LIBOBJS = @LIBOBJS@
-ifneq (,$(LIBOBJS))
-LIBS += -lpgport
-LDFLAGS := -L$(top_builddir)/src/port $(LDFLAGS)
+LIBS := -lpgport $(LIBS)
+# add location of libpgport.a to LDFLAGS
+ifdef PGXS
+override LDFLAGS := -L$(libdir) $(LDFLAGS)
+else
+override LDFLAGS := -L$(top_builddir)/src/port $(LDFLAGS)
endif
-# to make ws2_32.lib the last library
+# to make ws2_32.lib the last library, and always link with shfolder,
+# so SHGetFolderName isn't picked up from shell32.dll
ifeq ($(PORTNAME),win32)
-LIBS += -lws2_32
+LIBS += -lws2_32 -lshfolder
endif
# Not really standard libc functions, used by the backend.
#
# Global targets and rules
+%.i: %.c
+ $(CPP) $(CPPFLAGS) -o $@ $<
+
%.gz: %
$(GZIP) -f --best $<
%.bz2: %
$(BZIP2) -f $<
+ifndef PGXS
+
# Remake Makefile.global from Makefile.global.in if the latter
# changed. In order to trigger this rule, the including file must
# write `include $(top_builddir)/src/Makefile.global', not some
$(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status
cd $(top_builddir) && ./config.status src/include/pg_config.h
+# Also remake ecpg_config.h from ecpg_config.h.in if the latter changed, same
+# logic as above.
+$(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h: $(top_builddir)/src/interfaces/ecpg/include/stamp-h
+
+ $(top_builddir)/src/interfaces/ecpg/include/stamp-h: $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h.in $(top_builddir)/config.status
+ cd $(top_builddir) && ./config.status src/interfaces/ecpg/include/ecpg_config.h
+
# When configure changes, rerun configure with the same options as
# last time. To change configure, you need to run autoconf manually.
$(top_builddir)/config.status: $(top_srcdir)/configure
cd $(top_builddir) && ./config.status --recheck
+endif # not PGXS
+
install-strip:
@$(MAKE) INSTALL_PROGRAM_ENV="STRIPPROG='$(STRIP)'" \
# Next time we invoke make we will have top-notch information about
# whether this file needs to be updated. The dependency files are kept
# in the .deps subdirectory of each directory.
-#
-# The sed command is necessary to post-process the dependency file:
-# Each dependency file becomes a target of its own, without
-# dependencies or commands. This is because if you happen to remove a
-# file that is a dependency (say, you rename a header file) the
-# dependency would point to a non-existing file and make would fail.
-# But if the file is listed as a target of its own, without
-# prerequisites and commands, and doesn't exist then make will
-# consider it updated. (That in turn also has the nice side effect
-# that make will update all files that depended on the now removed
-# file.)
autodepend = @autodepend@
endif
DEPDIR = .deps
-df = $(DEPDIR)/$(*F)
-
-# This converts a .d file in the current directory to a .P file in the .deps
-# subdirectory, with the dummy targets as explained above.
-define postprocess-depend
-@if test ! -d $(DEPDIR); then mkdir $(DEPDIR); fi
-@cp $*.d $(df).P
-@sed -e 's/#.*//' -e 's/^[^:]*: *//' -e 's/ *\\$$//' \
- -e '/^$$/ d' -e 's/$$/ :/' < $*.d >> $(df).P
-@rm -f $*.d
-endef
ifeq ($(GCC), yes)
# GCC allows us to create object and dependency file in one invocation.
%.o : %.c
- $(COMPILE.c) -o $@ $< -MMD
- $(postprocess-depend)
+ @if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi
+ $(COMPILE.c) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po
endif # GCC
# Include all the dependency files generated for the current
# directory. List /dev/null as dummy because if the wildcard expands
# to nothing then make would complain.
--include $(wildcard $(DEPDIR)/*.P) /dev/null
+-include $(wildcard $(DEPDIR)/*.Po) /dev/null
# hook for clean-up
clean distclean maintainer-clean: clean-deps
.PHONY: clean-deps
clean-deps:
- @rm -rf $(DEPDIR) *.d
+ @rm -rf $(DEPDIR)
endif # autodepend
endif # nls.mk
endif # enable_nls
+
+
+##########################################################################
+#
+# Coverage
+
+# Explanation of involved files:
+# foo.c source file
+# foo.o object file
+# foo.gcno gcov graph (a.k.a. "notes") file, created at compile time
+# (by gcc -ftest-coverage)
+# foo.gcda gcov data file, created when the program is run (for
+# programs compiled with gcc -fprofile-arcs)
+# foo.c.gcov gcov output file with coverage information, created by
+# gcov from foo.gcda (by "make coverage")
+# foo.c.gcov.out stdout captured when foo.c.gcov is created, mildly
+# interesting
+# lcov.info lcov tracefile, built from gcda files in one directory,
+# later collected by "make coverage-html"
+
+ifeq ($(enable_coverage), yes)
+
+# There is a strange interaction between lcov and existing .gcov
+# output files. Hence the rm command and the ordering dependency.
+
+gcda_files := $(wildcard *.gcda)
+
+lcov.info: $(gcda_files)
+ rm -f *.gcov
+ $(if $^,$(LCOV) -d . -c -o $@ $(LCOVFLAGS))
+
+%.c.gcov: %.gcda | lcov.info
+ $(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.out
+
+
+# hook for clean-up
+clean distclean maintainer-clean: clean-coverage
+
+.PHONY: clean-coverage
+clean-coverage:
+ rm -f *.gcda *.gcno lcov.info *.gcov *.gcov.out
+
+
+# User-callable target to reset counts between test runs
+coverage-clean:
+ rm -f `find . -name '*.gcda' -print`
+
+endif # enable_coverage