# -*-makefile-*-
# src/Makefile.global.in
+# @configure_input@
#------------------------------------------------------------------------------
# All PostgreSQL makefiles include this file and use the variables it sets,
# PostgreSQL version number
VERSION = @PACKAGE_VERSION@
MAJORVERSION = @PG_MAJORVERSION@
+VERSION_NUM = @PG_VERSION_NUM@
-# Support for VPATH builds
+# Set top_srcdir, srcdir, and VPATH.
+ifdef PGXS
+top_srcdir = $(top_builddir)
+
+# If VPATH is set or Makefile is not in current directory we are building
+# the extension with VPATH so we set the variable here.
+ifdef VPATH
+srcdir = $(VPATH)
+else
+ifeq ($(CURDIR),$(dir $(firstword $(MAKEFILE_LIST))))
+srcdir = .
+VPATH =
+else
+srcdir = $(dir $(firstword $(MAKEFILE_LIST)))
+VPATH = $(srcdir)
+endif
+endif
+else # not PGXS
vpath_build = @vpath_build@
+abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ifneq ($(vpath_build),yes)
srcdir = $(top_srcdir)/$(subdir)
VPATH = $(srcdir)
endif
+endif # not PGXS
vpathsearch = `for f in $(addsuffix /$(1),$(subst :, ,. $(VPATH))); do test -r $$f && echo $$f && break; done`
with_python = @with_python@
with_tcl = @with_tcl@
with_openssl = @with_openssl@
-with_ossp_uuid = @with_ossp_uuid@
with_selinux = @with_selinux@
with_libxml = @with_libxml@
with_libxslt = @with_libxslt@
with_system_tzdata = @with_system_tzdata@
+with_uuid = @with_uuid@
with_zlib = @with_zlib@
enable_rpath = @enable_rpath@
enable_nls = @enable_nls@
enable_debug = @enable_debug@
enable_dtrace = @enable_dtrace@
enable_coverage = @enable_coverage@
+enable_tap_tests = @enable_tap_tests@
enable_thread_safety = @enable_thread_safety@
-python_enable_shared = @python_enable_shared@
python_includespec = @python_includespec@
python_libdir = @python_libdir@
python_libspec = @python_libspec@
krb_srvtab = @krb_srvtab@
TCLSH = @TCLSH@
-TCL_LIB_FILE = @TCL_LIB_FILE@
TCL_LIBS = @TCL_LIBS@
TCL_LIB_SPEC = @TCL_LIB_SPEC@
TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@
SUN_STUDIO_CC = @SUN_STUDIO_CC@
CFLAGS = @CFLAGS@
CFLAGS_VECTOR = @CFLAGS_VECTOR@
+CFLAGS_SSE42 = @CFLAGS_SSE42@
# Kind-of compilers
LIBS = @LIBS@
LDAP_LIBS_FE = @LDAP_LIBS_FE@
LDAP_LIBS_BE = @LDAP_LIBS_BE@
-OSSP_UUID_LIBS = @OSSP_UUID_LIBS@
+UUID_LIBS = @UUID_LIBS@
+UUID_EXTRA_OBJS = @UUID_EXTRA_OBJS@
LD = @LD@
with_gnu_ld = @with_gnu_ld@
ld_R_works = @ld_R_works@
endif
perl_archlibexp = @perl_archlibexp@
perl_privlibexp = @perl_privlibexp@
-perl_useshrplib = @perl_useshrplib@
perl_embed_ldflags = @perl_embed_ldflags@
# Miscellaneous
GZIP = gzip
BZIP2 = bzip2
+# Testing
+
+check: temp-install
+
+.PHONY: temp-install
+temp-install:
+ifndef NO_TEMP_INSTALL
+ifeq ($(MAKELEVEL),0)
+ rm -rf '$(abs_top_builddir)'/tmp_install
+ $(MKDIR_P) '$(abs_top_builddir)'/tmp_install/log
+ $(MAKE) -C '$(top_builddir)' DESTDIR='$(abs_top_builddir)'/tmp_install install >'$(abs_top_builddir)'/tmp_install/log/install.log 2>&1
+endif
+ $(if $(EXTRA_INSTALL),for extra in $(EXTRA_INSTALL); do $(MAKE) -C '$(top_builddir)'/$$extra DESTDIR='$(abs_top_builddir)'/tmp_install install >>'$(abs_top_builddir)'/tmp_install/log/install.log || exit; done)
+endif
+
+PROVE = @PROVE@
+PG_PROVE_FLAGS = -I $(top_srcdir)/src/test/perl/
+PROVE_FLAGS = --verbose
+
+# prepend to path if already set, else just set it
+define add_to_path
+$(1)="$(if $($(1)),$(2):$$$(1),$(2))"
+endef
+
+# platform-specific environment variable to set shared library path
+define ld_library_path_var
+$(if $(filter $(PORTNAME),darwin),DYLD_LIBRARY_PATH,$(if $(filter $(PORTNAME),aix),LIBPATH,LD_LIBRARY_PATH))
+endef
+
+define with_temp_install
+PATH="$(abs_top_builddir)/tmp_install$(bindir):$$PATH" $(call add_to_path,$(ld_library_path_var),$(abs_top_builddir)/tmp_install$(libdir))
+endef
+
+ifeq ($(enable_tap_tests),yes)
+
+define prove_installcheck
+cd $(srcdir) && TESTDIR='$(CURDIR)' PATH="$(bindir):$$PATH" PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) t/*.pl
+endef
+
+define prove_check
+rm -rf $(CURDIR)/tmp_check/log
+cd $(srcdir) && TESTDIR='$(CURDIR)' $(with_temp_install) PGPORT='6$(DEF_PGPORT)' PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) t/*.pl
+endef
+
+else
+prove_installcheck = @echo "TAP tests not enabled"
+prove_check = $(prove_installcheck)
+endif
+
# Installation.
install_bin = @install_bin@
have_docbook = @have_docbook@
COLLATEINDEX = @COLLATEINDEX@
+DBTOEPUB = @DBTOEPUB@
DOCBOOKSTYLE = @DOCBOOKSTYLE@
JADE = @JADE@
NSGMLS = @NSGMLS@
OSX = @OSX@
+XMLLINT = @XMLLINT@
XSLTPROC = @XSLTPROC@
# Code coverage
# Make HAVE_IPV6 available for initdb script creation
HAVE_IPV6= @HAVE_IPV6@
-# The HP-UX port makefile, for one, needs access to this symbol
-HAVE_POSIX_SIGNALS= @HAVE_POSIX_SIGNALS@
-
# This is mainly for use on FreeBSD, where we have both a.out and elf
# systems now. May be applicable to other systems to?
ELF_SYSTEM= @ELF_SYS@
libpq_pgport = -L$(top_builddir)/src/common -lpgcommon -L$(top_builddir)/src/port -lpgport $(libpq)
endif
-# If PGXS is not defined, build libpq and libpgport dependancies as required.
-# If the build is with PGXS, then these are supposed to be already built and
-# installed, and we just ensure that the expected files exist.
-ifndef PGXS
+# Cygwin seems to need ldap libraries to be mentioned here, too
+ifeq ($(PORTNAME),cygwin)
+libpq_pgport += $(LDAP_LIBS_FE)
+endif
+
+
submake-libpq:
$(MAKE) -C $(libpq_builddir) all
-else
-submake-libpq: $(libdir)/libpq.so ;
-endif
-ifndef PGXS
submake-libpgport:
$(MAKE) -C $(top_builddir)/src/port all
$(MAKE) -C $(top_builddir)/src/common all
-else
-submake-libpgport: $(libdir)/libpgport.a $(libdir)/libpgcommon.a ;
-endif
.PHONY: submake-libpq submake-libpgport
pg_regress_locale_flags = $(if $(ENCODING),--encoding=$(ENCODING)) $(NOLOCALE)
-pg_regress_check = $(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --temp-install=./tmp_check --top-builddir=$(top_builddir) $(pg_regress_locale_flags)
-pg_regress_installcheck = $(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --psqldir='$(PSQLDIR)' $(pg_regress_locale_flags)
+pg_regress_check = $(with_temp_install) $(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --temp-instance=./tmp_check --bindir= $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS)
+pg_regress_installcheck = $(top_builddir)/src/test/regress/pg_regress --inputdir=$(srcdir) --bindir='$(bindir)' $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS)
pg_regress_clean_files = results/ regression.diffs regression.out tmp_check/ log/
+pg_isolation_regress_check = $(with_temp_install) $(top_builddir)/src/test/isolation/pg_isolation_regress --inputdir=$(srcdir) --temp-instance=./tmp_check --bindir= $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS)
+pg_isolation_regress_installcheck = $(top_builddir)/src/test/isolation/pg_isolation_regress --inputdir=$(srcdir) $(pg_regress_locale_flags) $(EXTRA_REGRESS_OPTS)
##########################################################################
#
LIBOBJS = @LIBOBJS@
+# files needed for the chosen CRC-32C implementation
+PG_CRC32C_OBJS = @PG_CRC32C_OBJS@
+
LIBS := -lpgcommon -lpgport $(LIBS)
-# to make ws2_32.lib the last library, and always link with shfolder,
-# so SHGetFolderName isn't picked up from shell32.dll
+# to make ws2_32.lib the last library
ifeq ($(PORTNAME),win32)
-LIBS += -lws2_32 -lshfolder
+LIBS += -lws2_32
endif
# Not really standard libc functions, used by the backend.
define _create_recursive_target
.PHONY: $(1)-$(2)-recurse
$(1): $(1)-$(2)-recurse
-$(1)-$(2)-recurse:
+$(1)-$(2)-recurse: $(if $(filter check, $(3)), temp-install)
$$(MAKE) -C $(2) $(3)
endef
# Note that the use of $$ on the last line above is important; we want
lcov.info: $(gcda_files)
rm -f *.gcov
- $(if $^,$(LCOV) -d . -c -o $@ $(LCOVFLAGS))
+ $(if $^,$(LCOV) -d . -c -o $@ $(LCOVFLAGS) --gcov-tool $(GCOV))
%.c.gcov: %.gcda | lcov.info
$(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.out
projects / postgresql / blobdiff