-/* ====================================================================
- * The Apache Software License, Version 1.1
+/* Licensed to the Apache Software Foundation (ASF) under one or more
+ * contributor license agreements. See the NOTICE file distributed with
+ * this work for additional information regarding copyright ownership.
+ * The ASF licenses this file to You under the Apache License, Version 2.0
+ * (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
*
- * Copyright (c) 2000-2002 The Apache Software Foundation. All rights
- * reserved.
+ * http://www.apache.org/licenses/LICENSE-2.0
*
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- *
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- *
- * 3. The end-user documentation included with the redistribution,
- * if any, must include the following acknowledgment:
- * "This product includes software developed by the
- * Apache Software Foundation (http://www.apache.org/)."
- * Alternately, this acknowledgment may appear in the software itself,
- * if and wherever such third-party acknowledgments normally appear.
- *
- * 4. The names "Apache" and "Apache Software Foundation" must
- * not be used to endorse or promote products derived from this
- * software without prior written permission. For written
- * permission, please contact apache@apache.org.
- *
- * 5. Products derived from this software may not be called "Apache",
- * nor may "Apache" appear in their name, without prior written
- * permission of the Apache Software Foundation.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR
- * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
- * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
- * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- * ====================================================================
- *
- * This software consists of voluntary contributions made by many
- * individuals on behalf of the Apache Software Foundation. For more
- * information on the Apache Software Foundation, please see
- * <http://www.apache.org/>.
- *
- * Portions of this software are based upon public domain software
- * originally written at the National Center for Supercomputing Applications,
- * University of Illinois, Urbana-Champaign.
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
*/
#include "apr_network_io.h"
#define APR_WANT_STRFUNC
#include "apr_want.h"
-#define CORE_PRIVATE
#include "ap_config.h"
#include "httpd.h"
#include "http_config.h"
+#include "http_core.h"
#include "ap_listen.h"
#include "http_log.h"
-#include "mpm.h"
#include "mpm_common.h"
-ap_listen_rec *ap_listeners = NULL;
-
-#if APR_HAVE_IPV6
-static int default_family = APR_UNSPEC;
-#else
-static int default_family = APR_INET;
-#endif
+AP_DECLARE_DATA ap_listen_rec *ap_listeners = NULL;
static ap_listen_rec *old_listeners;
static int ap_listenbacklog;
static int send_buffer_size;
+static int receive_buffer_size;
/* TODO: make_sock is just begging and screaming for APR abstraction */
static apr_status_t make_sock(apr_pool_t *p, ap_listen_rec *server)
}
#if APR_HAVE_IPV6
- stat = apr_socket_opt_set(s, APR_IPV6_V6ONLY, v6only_setting);
- if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) {
- ap_log_perror(APLOG_MARK, APLOG_CRIT, stat, p,
- "make_sock: for address %pI, apr_socket_opt_set: "
- "(IPV6_V6ONLY)",
- server->bind_addr);
- apr_socket_close(s);
- return stat;
+ if (server->bind_addr->family == APR_INET6) {
+ stat = apr_socket_opt_set(s, APR_IPV6_V6ONLY, v6only_setting);
+ if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) {
+ ap_log_perror(APLOG_MARK, APLOG_CRIT, stat, p,
+ "make_sock: for address %pI, apr_socket_opt_set: "
+ "(IPV6_V6ONLY)",
+ server->bind_addr);
+ apr_socket_close(s);
+ return stat;
+ }
}
#endif
/* not a fatal error */
}
}
+ if (receive_buffer_size) {
+ stat = apr_socket_opt_set(s, APR_SO_RCVBUF, receive_buffer_size);
+ if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) {
+ ap_log_perror(APLOG_MARK, APLOG_WARNING, stat, p,
+ "make_sock: failed to set ReceiveBufferSize for "
+ "address %pI, using default",
+ server->bind_addr);
+ /* not a fatal error */
+ }
+ }
#if APR_TCP_NODELAY_INHERITED
ap_sock_disable_nagle(s);
#endif
- if ((stat = apr_bind(s, server->bind_addr)) != APR_SUCCESS) {
+ if ((stat = apr_socket_bind(s, server->bind_addr)) != APR_SUCCESS) {
ap_log_perror(APLOG_MARK, APLOG_STARTUP|APLOG_CRIT, stat, p,
"make_sock: could not bind to address %pI",
server->bind_addr);
return stat;
}
- if ((stat = apr_listen(s, ap_listenbacklog)) != APR_SUCCESS) {
+ if ((stat = apr_socket_listen(s, ap_listenbacklog)) != APR_SUCCESS) {
ap_log_perror(APLOG_MARK, APLOG_STARTUP|APLOG_ERR, stat, p,
"make_sock: unable to listen for connections "
"on address %pI",
stat = apr_socket_opt_set(s, APR_SO_REUSEADDR, one);
if (stat != APR_SUCCESS && stat != APR_ENOTIMPL) {
ap_log_perror(APLOG_MARK, APLOG_CRIT, stat, p,
- "make_sock: for address %pI, apr_socket_opt_set: (SO_REUSEADDR)",
+ "make_sock: for address %pI, apr_socket_opt_set: (SO_REUSEADDR)",
server->bind_addr);
apr_socket_close(s);
return stat;
}
#endif
-#if APR_HAS_SO_ACCEPTFILTER
-#ifndef ACCEPT_FILTER_NAME
-#define ACCEPT_FILTER_NAME "dataready"
-#endif
- apr_socket_accept_filter(s, ACCEPT_FILTER_NAME, "");
-#endif
-
server->sd = s;
server->active = 1;
-#ifdef MPM_ACCEPT_FUNC
- server->accept_func = MPM_ACCEPT_FUNC;
-#else
server->accept_func = NULL;
-#endif
return APR_SUCCESS;
}
-static apr_status_t close_listeners_on_exec(void *v)
+static const char* find_accf_name(server_rec *s, const char *proto)
{
- ap_listen_rec *lr;
+ const char* accf;
+ core_server_config *conf = ap_get_module_config(s->module_config,
+ &core_module);
+ if (!proto) {
+ return NULL;
+ }
- for (lr = ap_listeners; lr; lr = lr->next) {
- apr_socket_close(lr->sd);
- lr->active = 0;
+ accf = apr_table_get(conf->accf_map, proto);
+
+ if (accf && !strcmp("none", accf)) {
+ return NULL;
}
- return APR_SUCCESS;
+ return accf;
}
-
-static void find_default_family(apr_pool_t *p)
+static void ap_apply_accept_filter(apr_pool_t *p, ap_listen_rec *lis,
+ server_rec *server)
{
-#if APR_HAVE_IPV6
- /* We know the platform supports IPv6, but this particular
- * system may not have IPv6 enabled. See if we can get an
- * AF_INET6 socket and bind to an ephemeral port. (On most
- * systems, getting an AF_INET6 socket is a sufficient test.
- * On certain levels of OpenUNIX, getting the socket is
- * successful but bind always returns ENETUNREACH.)
- */
- if (default_family == APR_UNSPEC) {
- apr_status_t sock_rv;
- apr_socket_t *tmp_sock;
- apr_sockaddr_t *sa;
-
- if ((sock_rv = apr_socket_create(&tmp_sock, APR_INET6, SOCK_STREAM, p))
- == APR_SUCCESS &&
- apr_sockaddr_info_get(&sa, NULL, APR_INET6, 0, 0, p) == APR_SUCCESS &&
- apr_bind(tmp_sock, sa) == APR_SUCCESS) {
- default_family = APR_INET6;
- }
- else {
- default_family = APR_INET;
+ apr_socket_t *s = lis->sd;
+ const char *accf;
+ apr_status_t rv;
+ const char *proto;
+
+ proto = lis->protocol;
+
+ if (!proto) {
+ proto = ap_get_server_protocol(server);
+ }
+
+
+ accf = find_accf_name(server, proto);
+
+ if (accf) {
+#if APR_HAS_SO_ACCEPTFILTER
+ rv = apr_socket_accept_filter(s, apr_pstrdup(p, accf),
+ apr_pstrdup(p,""));
+ if (rv != APR_SUCCESS && !APR_STATUS_IS_ENOTIMPL(rv)) {
+ ap_log_perror(APLOG_MARK, APLOG_WARNING, rv, p,
+ "Failed to enable the '%s' Accept Filter",
+ accf);
}
- if (sock_rv == APR_SUCCESS) {
- apr_socket_close(tmp_sock);
+#else
+ rv = apr_socket_opt_set(s, APR_TCP_DEFER_ACCEPT, 30);
+ if (rv != APR_SUCCESS && !APR_STATUS_IS_ENOTIMPL(rv)) {
+ ap_log_perror(APLOG_MARK, APLOG_WARNING, rv, p,
+ "Failed to enable APR_TCP_DEFER_ACCEPT");
}
- }
#endif
+ }
}
+static apr_status_t close_listeners_on_exec(void *v)
+{
+ ap_close_listeners();
+ return APR_SUCCESS;
+}
-static const char *alloc_listener(process_rec *process, char *addr, apr_port_t port)
+static const char *alloc_listener(process_rec *process, char *addr,
+ apr_port_t port, const char* proto)
{
- ap_listen_rec **walk;
- ap_listen_rec *new;
+ ap_listen_rec **walk, *last;
apr_status_t status;
- apr_port_t oldport;
apr_sockaddr_t *sa;
-
- if (!addr) { /* don't bind to specific interface */
- find_default_family(process->pool);
- switch(default_family) {
- case APR_INET:
- addr = "0.0.0.0";
- break;
-
-#if APR_HAVE_IPV6
- case APR_INET6:
- addr = "::";
- break;
-#endif
-
- default:
- ap_assert(1 != 1); /* should not occur */
- }
- }
+ int found_listener = 0;
/* see if we've got an old listener for this address:port */
- for (walk = &old_listeners; *walk; walk = &(*walk)->next) {
+ for (walk = &old_listeners; *walk;) {
sa = (*walk)->bind_addr;
/* Some listeners are not real so they will not have a bind_addr. */
if (sa) {
- apr_sockaddr_port_get(&oldport, sa);
- if (!strcmp(sa->hostname, addr) && port == oldport) {
- /* re-use existing record */
+ ap_listen_rec *new;
+ apr_port_t oldport;
+
+ oldport = sa->port;
+ /* If both ports are equivalent, then if their names are equivalent,
+ * then we will re-use the existing record.
+ */
+ if (port == oldport &&
+ ((!addr && !sa->hostname) ||
+ ((addr && sa->hostname) && !strcmp(sa->hostname, addr)))) {
new = *walk;
*walk = new->next;
new->next = ap_listeners;
ap_listeners = new;
- return NULL;
+ found_listener = 1;
+ continue;
}
}
+
+ walk = &(*walk)->next;
+ }
+
+ if (found_listener) {
+ return NULL;
}
- /* this has to survive restarts */
- new = apr_palloc(process->pool, sizeof(ap_listen_rec));
- new->active = 0;
- if ((status = apr_sockaddr_info_get(&new->bind_addr, addr, APR_UNSPEC,
- port, 0, process->pool))
+ if ((status = apr_sockaddr_info_get(&sa, addr, APR_UNSPEC, port, 0,
+ process->pool))
!= APR_SUCCESS) {
ap_log_perror(APLOG_MARK, APLOG_CRIT, status, process->pool,
"alloc_listener: failed to set up sockaddr for %s",
addr);
return "Listen setup failed";
}
- if ((status = apr_socket_create(&new->sd,
- new->bind_addr->family,
- SOCK_STREAM, process->pool))
- != APR_SUCCESS) {
- ap_log_perror(APLOG_MARK, APLOG_CRIT, status, process->pool,
- "alloc_listener: failed to get a socket for %s", addr);
- return "Listen setup failed";
+
+ /* Initialize to our last configured ap_listener. */
+ last = ap_listeners;
+ while (last && last->next) {
+ last = last->next;
+ }
+
+ while (sa) {
+ ap_listen_rec *new;
+
+ /* this has to survive restarts */
+ new = apr_palloc(process->pool, sizeof(ap_listen_rec));
+ new->active = 0;
+ new->next = 0;
+ new->bind_addr = sa;
+ new->protocol = apr_pstrdup(process->pool, proto);
+
+ /* Go to the next sockaddr. */
+ sa = sa->next;
+
+ status = apr_socket_create(&new->sd, new->bind_addr->family,
+ SOCK_STREAM, 0, process->pool);
+
+#if APR_HAVE_IPV6
+ /* What could happen is that we got an IPv6 address, but this system
+ * doesn't actually support IPv6. Try the next address.
+ */
+ if (status != APR_SUCCESS && !addr &&
+ new->bind_addr->family == APR_INET6) {
+ continue;
+ }
+#endif
+ if (status != APR_SUCCESS) {
+ ap_log_perror(APLOG_MARK, APLOG_CRIT, status, process->pool,
+ "alloc_listener: failed to get a socket for %s",
+ addr);
+ return "Listen setup failed";
+ }
+
+ /* We need to preserve the order returned by getaddrinfo() */
+ if (last == NULL) {
+ ap_listeners = last = new;
+ } else {
+ last->next = new;
+ last = new;
+ }
}
- new->next = ap_listeners;
- ap_listeners = new;
return NULL;
}
-
-static int ap_listen_open(apr_pool_t *pool, apr_port_t port)
+/* Evaluates to true if the (apr_sockaddr_t *) addr argument is the
+ * IPv4 match-any-address, 0.0.0.0. */
+#define IS_INADDR_ANY(addr) ((addr)->family == APR_INET \
+ && (addr)->sa.sin.sin_addr.s_addr == INADDR_ANY)
+
+/* Evaluates to true if the (apr_sockaddr_t *) addr argument is the
+ * IPv6 match-any-address, [::]. */
+#define IS_IN6ADDR_ANY(addr) ((addr)->family == APR_INET6 \
+ && IN6_IS_ADDR_UNSPECIFIED(&(addr)->sa.sin6.sin6_addr))
+
+/**
+ * Create, open, listen, and bind all sockets.
+ * @param process The process record for the currently running server
+ * @return The number of open sockets
+ */
+static int open_listeners(apr_pool_t *pool)
{
ap_listen_rec *lr;
ap_listen_rec *next;
+ ap_listen_rec *previous;
int num_open;
+ const char *userdata_key = "ap_open_listeners";
+ void *data;
+#if AP_NONBLOCK_WHEN_MULTI_LISTEN
+ int use_nonblock;
+#endif
/* Don't allocate a default listener. If we need to listen to a
* port, then the user needs to have a Listen directive in their
* config file.
*/
num_open = 0;
- for (lr = ap_listeners; lr; lr = lr->next) {
+ previous = NULL;
+ for (lr = ap_listeners; lr; previous = lr, lr = lr->next) {
if (lr->active) {
++num_open;
}
else {
+#if APR_HAVE_IPV6
+ ap_listen_rec *cur;
+ int v6only_setting;
+ int skip = 0;
+
+ /* If we have the unspecified IPv4 address (0.0.0.0) and
+ * the unspecified IPv6 address (::) is next, we need to
+ * swap the order of these in the list. We always try to
+ * bind to IPv6 first, then IPv4, since an IPv6 socket
+ * might be able to receive IPv4 packets if V6ONLY is not
+ * enabled, but never the other way around.
+ * Note: In some configurations, the unspecified IPv6 address
+ * could be even later in the list. This logic only corrects
+ * the situation where it is next in the list, such as when
+ * apr_sockaddr_info_get() returns an IPv4 and an IPv6 address,
+ * in that order.
+ */
+ if (lr->next != NULL
+ && IS_INADDR_ANY(lr->bind_addr)
+ && lr->bind_addr->port == lr->next->bind_addr->port
+ && IS_IN6ADDR_ANY(lr->next->bind_addr)) {
+ /* Exchange lr and lr->next */
+ next = lr->next;
+ lr->next = next->next;
+ next->next = lr;
+ if (previous) {
+ previous->next = next;
+ }
+ else {
+ ap_listeners = next;
+ }
+ lr = next;
+ }
+
+ /* If we are trying to bind to 0.0.0.0 and a previous listener
+ * was :: on the same port and in turn that socket does not have
+ * the IPV6_V6ONLY flag set; we must skip the current attempt to
+ * listen (which would generate an error). IPv4 will be handled
+ * on the established IPv6 socket.
+ */
+ if (IS_INADDR_ANY(lr->bind_addr)) {
+ for (cur = ap_listeners; cur != lr; cur = cur->next) {
+ if (lr->bind_addr->port == cur->bind_addr->port
+ && IS_IN6ADDR_ANY(cur->bind_addr)
+ && apr_socket_opt_get(cur->sd, APR_IPV6_V6ONLY,
+ &v6only_setting) == APR_SUCCESS
+ && v6only_setting == 0) {
+
+ /* Remove the current listener from the list */
+ previous->next = lr->next;
+ lr = previous; /* maintain current value of previous after
+ * post-loop expression is evaluated
+ */
+ skip = 1;
+ break;
+ }
+ }
+ if (skip) {
+ continue;
+ }
+ }
+#endif
if (make_sock(pool, lr) == APR_SUCCESS) {
++num_open;
lr->active = 1;
}
else {
+#if APR_HAVE_IPV6
+ /* If we tried to bind to ::, and the next listener is
+ * on 0.0.0.0 with the same port, don't give a fatal
+ * error. The user will still get a warning from make_sock
+ * though.
+ */
+ if (lr->next != NULL
+ && IS_IN6ADDR_ANY(lr->bind_addr)
+ && lr->bind_addr->port == lr->next->bind_addr->port
+ && IS_INADDR_ANY(lr->next->bind_addr)) {
+
+ /* Remove the current listener from the list */
+ if (previous) {
+ previous->next = lr->next;
+ }
+ else {
+ ap_listeners = lr->next;
+ }
+
+ /* Although we've removed ourselves from the list,
+ * we need to make sure that the next iteration won't
+ * consider "previous" a working IPv6 '::' socket.
+ * Changing the family is enough to make sure the
+ * conditions before make_sock() fail.
+ */
+ lr->bind_addr->family = AF_INET;
+
+ continue;
+ }
+#endif
/* fatal error */
return -1;
}
}
old_listeners = NULL;
- apr_pool_cleanup_register(pool, NULL, apr_pool_cleanup_null,
- close_listeners_on_exec);
+#if AP_NONBLOCK_WHEN_MULTI_LISTEN
+ /* if multiple listening sockets, make them non-blocking so that
+ * if select()/poll() reports readability for a reset connection that
+ * is already forgotten about by the time we call accept, we won't
+ * be hung until another connection arrives on that port
+ */
+ use_nonblock = (ap_listeners && ap_listeners->next);
+ for (lr = ap_listeners; lr; lr = lr->next) {
+ apr_status_t status;
+
+ status = apr_socket_opt_set(lr->sd, APR_SO_NONBLOCK, use_nonblock);
+ if (status != APR_SUCCESS) {
+ ap_log_perror(APLOG_MARK, APLOG_STARTUP|APLOG_ERR, status, pool,
+ "unable to control socket non-blocking status");
+ return -1;
+ }
+ }
+#endif /* AP_NONBLOCK_WHEN_MULTI_LISTEN */
+
+ /* we come through here on both passes of the open logs phase
+ * only register the cleanup once... otherwise we try to close
+ * listening sockets twice when cleaning up prior to exec
+ */
+ apr_pool_userdata_get(&data, userdata_key, pool);
+ if (!data) {
+ apr_pool_userdata_set((const void *)1, userdata_key,
+ apr_pool_cleanup_null, pool);
+ apr_pool_cleanup_register(pool, NULL, apr_pool_cleanup_null,
+ close_listeners_on_exec);
+ }
return num_open ? 0 : -1;
}
-int ap_setup_listeners(server_rec *s)
+AP_DECLARE(int) ap_setup_listeners(server_rec *s)
{
+ server_rec *ls;
+ server_addr_rec *addr;
ap_listen_rec *lr;
int num_listeners = 0;
+ const char* proto;
+ int found;
+
+ for (ls = s; ls; ls = ls->next) {
+ proto = ap_get_server_protocol(ls);
+ if (!proto) {
+ found = 0;
+ /* No protocol was set for this vhost,
+ * use the default for this listener.
+ */
+ for (addr = ls->addrs; addr && !found; addr = addr->next) {
+ for (lr = ap_listeners; lr; lr = lr->next) {
+ if (apr_sockaddr_equal(lr->bind_addr, addr->host_addr) &&
+ lr->bind_addr->port == addr->host_port) {
+ ap_set_server_protocol(ls, lr->protocol);
+ found = 1;
+ break;
+ }
+ }
+ }
+
+ if (!found) {
+ /* TODO: set protocol defaults per-Port, eg 25=smtp */
+ ap_set_server_protocol(ls, "http");
+ }
+ }
+ }
- if (ap_listen_open(s->process->pool, s->port)) {
+ if (open_listeners(s->process->pool)) {
return 0;
}
for (lr = ap_listeners; lr; lr = lr->next) {
num_listeners++;
+ found = 0;
+ for (ls = s; ls && !found; ls = ls->next) {
+ for (addr = ls->addrs; addr && !found; addr = addr->next) {
+ if (apr_sockaddr_equal(lr->bind_addr, addr->host_addr) &&
+ lr->bind_addr->port == addr->host_port) {
+ found = 1;
+ ap_apply_accept_filter(s->process->pool, lr, ls);
+ }
+ }
+ }
+
+ if (!found) {
+ ap_apply_accept_filter(s->process->pool, lr, s);
+ }
}
return num_listeners;
}
-void ap_listen_pre_config(void)
+AP_DECLARE_NONSTD(void) ap_close_listeners(void)
+{
+ ap_listen_rec *lr;
+
+ for (lr = ap_listeners; lr; lr = lr->next) {
+ apr_socket_close(lr->sd);
+ lr->active = 0;
+ }
+}
+
+AP_DECLARE(void) ap_listen_pre_config(void)
{
old_listeners = ap_listeners;
ap_listeners = NULL;
}
-const char *ap_set_listener(cmd_parms *cmd, void *dummy, const char *ips)
+AP_DECLARE_NONSTD(const char *) ap_set_listener(cmd_parms *cmd, void *dummy,
+ int argc, char *const argv[])
{
- char *host, *scope_id;
+ char *host, *scope_id, *proto;
apr_port_t port;
apr_status_t rv;
const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
return err;
}
- rv = apr_parse_addr_port(&host, &scope_id, &port, ips, cmd->pool);
+ if (argc < 1 || argc > 2) {
+ return "Listen requires 1 or 2 arguments.";
+ }
+
+ rv = apr_parse_addr_port(&host, &scope_id, &port, argv[0], cmd->pool);
if (rv != APR_SUCCESS) {
return "Invalid address or port";
}
return "Port must be specified";
}
- return alloc_listener(cmd->server->process, host, port);
+ if (argc != 2) {
+ if (port == 443) {
+ proto = "https";
+ } else {
+ proto = "http";
+ }
+ }
+ else {
+ proto = apr_pstrdup(cmd->pool, argv[1]);
+ ap_str_tolower(proto);
+ }
+
+ return alloc_listener(cmd->server->process, host, port, proto);
}
-const char *ap_set_listenbacklog(cmd_parms *cmd, void *dummy, const char *arg)
+AP_DECLARE_NONSTD(const char *) ap_set_listenbacklog(cmd_parms *cmd,
+ void *dummy,
+ const char *arg)
{
int b;
const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
return NULL;
}
-const char *ap_set_send_buffer_size(cmd_parms *cmd, void *dummy,
- const char *arg)
+AP_DECLARE_NONSTD(const char *) ap_set_send_buffer_size(cmd_parms *cmd,
+ void *dummy,
+ const char *arg)
{
int s = atoi(arg);
const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
send_buffer_size = s;
return NULL;
}
+
+AP_DECLARE_NONSTD(const char *) ap_set_receive_buffer_size(cmd_parms *cmd,
+ void *dummy,
+ const char *arg)
+{
+ int s = atoi(arg);
+ const char *err = ap_check_cmd_context(cmd, GLOBAL_ONLY);
+
+ if (err != NULL) {
+ return err;
+ }
+
+ if (s < 512 && s != 0) {
+ return "ReceiveBufferSize must be >= 512 bytes, or 0 for system default.";
+ }
+
+ receive_buffer_size = s;
+ return NULL;
+}