<section id="contents"><title>Contents</title>
<ul>
- <li>
-
<a href="#operation">Operation</a>
+ <li> <a href="#gcaveats">General caveats</a> </li>
+
<li> <a href="#operation">Operation</a>
<ul>
<li><a href="#authenphase">The Authentication
<li><a href="#reqdn">Require ldap-dn</a></li>
<li><a href="#reqattribute">Require ldap-attribute</a></li>
<li><a href="#reqfilter">Require ldap-filter</a></li>
+ <li><a href="#reqsearch">Require ldap-search</a></li>
</ul>
</li>
</ul>
</section>
+<section id="gcaveats"><title>General caveats</title>
+<p> This module caches authentication and authorization results based
+on the configuration of <module>mod_ldap</module>. Changes
+made to the backing LDAP server will not be immediately reflected on the
+HTTP Server, including but not limited to user lockouts/revocations,
+password changes, or changes to group memberships. Consult the directives
+in <module>mod_ldap</module> for details of the cache tunables.
+</p>
+</section>
+
<section id="operation"><title>Operation</title>
<p>There are two phases in granting access to a user. The first
directive, and the search filter successfully finds a single user
object that matches the dn of the authenticated user.</li>
+ <li>Grant access if there is a <a href="#reqsearch">
+ <code>Require ldap-search</code></a>
+ directive, and the search filter successfully returns a single
+ matching object with any distinguished name.</li>
+
<li>otherwise, deny or decline access</li>
</ul>
<code>ldap-filter</code>. Other authorization types may also be
used but may require that additional authorization modules be loaded.</p>
+ <p>Since v2.4.8, <a href="../expr.html">expressions</a> are supported
+ within the LDAP require directives.</p>
+
<section id="requser"><title>Require ldap-user</title>
<p>The <code>Require ldap-user</code> directive specifies what
<p>If the <code>uid</code> attribute was used instead of the
<code>cn</code> attribute in the URL above, the above three lines
could be condensed to</p>
-<highlight language="config">Require ldap-user bjenson fuser jmanager</highlight>
+<highlight language="config">
+Require ldap-user bjenson fuser jmanager
+</highlight>
</section>
<section id="reqgroup"><title>Require ldap-group</title>
<p>The following directive would grant access to both Fred and
Barbara:</p>
-<highlight language="config">Require ldap-group cn=Administrators, o=Example</highlight>
+<highlight language="config">
+Require ldap-group cn=Administrators, o=Example
+</highlight>
<p>Members can also be found within sub-groups of a specified LDAP group
if <directive module="mod_authnz_ldap">AuthLDAPMaxSubGroupDepth</directive>
</pre></example>
<p>The following directives would allow access for Bob Ellis, Tom Jackson,
- Barbara Jensen, Fred User, Allan Jefferson, and Paul Tilley but would not
+ Barbara Jenson, Fred User, Allan Jefferson, and Paul Tilley but would not
allow access for Jim Swenson, or Elliot Rhodes (since they are at a
sub-group depth of 2):</p>
<highlight language="config">
-Require ldap-group cn=Employees, o-Example
+Require ldap-group cn=Employees, o=Example
AuthLDAPMaxSubGroupDepth 1
</highlight>
<p>The following directive would grant access to a specific
DN:</p>
-<highlight language="config">Require ldap-dn cn=Barbara Jenson, o=Example</highlight>
+<highlight language="config">
+Require ldap-dn cn=Barbara Jenson, o=Example
+</highlight>
<p>Behavior of this directive is modified by the <directive
module="mod_authnz_ldap">AuthLDAPCompareDNOnServer</directive>
<p>The following directive would grant access to anyone with
the attribute employeeType = active</p>
- <highlight language="config">Require ldap-attribute employeeType=active</highlight>
+ <highlight language="config">
+Require ldap-attribute "employeeType=active"
+</highlight>
<p>Multiple attribute/value pairs can be specified on the same line
separated by spaces or they can be specified in multiple
<p>The following directive would grant access to anyone with
the city attribute equal to "San Jose" or status equal to "Active"</p>
- <highlight language="config">Require ldap-attribute city="San Jose" status=active</highlight>
+ <highlight language="config">
+Require ldap-attribute city="San Jose" "status=active"
+</highlight>
</section>
<p>The following directive would grant access to anyone having a cell phone
and is in the marketing department</p>
- <highlight language="config">Require ldap-filter &(cell=*)(department=marketing)</highlight>
+ <highlight language="config">
+Require ldap-filter "&(cell=*)(department=marketing)"
+</highlight>
<p>The difference between the <code>Require ldap-filter</code> directive and the
<code>Require ldap-attribute</code> directive is that <code>ldap-filter</code>
<code>ldap-attribute</code> will be faster than the search operation
used by <code>ldap-filter</code> especially within a large directory.</p>
+ <p>When using an <a href="../expr.html">expression</a> within the filter, care
+ must be taken to ensure that LDAP filters are escaped correctly to guard against
+ LDAP injection. The ldap function can be used for this purpose.</p>
+
+<highlight language="config">
+<LocationMatch "^/dav/(?<SITENAME>[^/]+)/">
+ Require ldap-filter "(memberOf=cn=%{ldap:%{unescape:%{env:MATCH_SITENAME}},ou=Websites,o=Example)"
+</LocationMatch>
+</highlight>
+
+</section>
+
+<section id="reqsearch"><title>Require ldap-search</title>
+
+ <p>The <code>Require ldap-search</code> directive allows the
+ administrator to grant access based on a generic LDAP search filter using an
+ <a href="../expr.html">expression</a>. If there is exactly one match to the search filter,
+ regardless of the distinguished name, access is granted.</p>
+
+ <p>The following directive would grant access to URLs that match the given objects in the
+ LDAP server:</p>
+
+<highlight language="config">
+<LocationMatch "^/dav/(?<SITENAME>[^/]+)/">
+Require ldap-search "(cn=%{ldap:%{unescape:%{env:MATCH_SITENAME}} Website)"
+</LocationMatch>
+</highlight>
+
+ <p>Note: care must be taken to ensure that any expressions are properly escaped to guard
+ against LDAP injection. The <strong>ldap</strong> function can be used as per the example
+ above.</p>
+
</section>
</section>
The next example is the same as above; but with the fields
that have useful defaults omitted. Also, note the use of a
redundant LDAP server.
-<highlight language="config">AuthLDAPURL "ldap://ldap1.example.com ldap2.example.com/ou=People, o=Example"
+<highlight language="config">
+AuthLDAPURL "ldap://ldap1.example.com ldap2.example.com/ou=People, o=Example"
Require valid-user
</highlight>
</li>
</highlight>
</li>
+ <li>
+ Grant access to anybody in the group whose name matches the
+ hostname of the virtual host. In this example an
+ <a href="../expr.html">expression</a> is used to build the filter.
+<highlight language="config">
+AuthLDAPURL ldap://ldap.example.com/o=Example?uid
+Require ldap-group cn=%{SERVER_NAME}, o=Example
+</highlight>
+ </li>
+
<li>
The next example assumes that everyone at Example who
carries an alphanumeric pager will have an LDAP attribute
that gets created in the web</p>
<highlight language="config">
AuthLDAPURL "the url"
-AuthGroupFile mygroupfile
-Require group mygroupfile
+AuthGroupFile "mygroupfile"
+Require group "mygroupfile"
</highlight>
<section id="howitworks"><title>How It Works</title>
<directivesynopsis>
<name>AuthLDAPBindAuthoritative</name>
<description>Determines if other authentication providers are used when a user can be mapped to a DN but the server cannot successfully bind with the user's credentials.</description>
-<syntax>AuthLDAPBindAuthoritative<em>off|on</em></syntax>
+<syntax>AuthLDAPBindAuthoritative off|on</syntax>
<default>AuthLDAPBindAuthoritative on</default>
<contextlist><context>directory</context><context>.htaccess</context>
</contextlist>
<p>By default, subsequent authentication providers are only queried if a
user cannot be mapped to a DN, but not if the user can be mapped to a DN and their
password cannot be verified with an LDAP bind.
- If <directive module="mod_authnz_ldap">AuthLDAPBindAuthoritative</directive>
+ If <directive>AuthLDAPBindAuthoritative</directive>
is set to <em>off</em>, other configured authentication modules will have
a chance to validate the user if the LDAP bind (with the current user's credentials)
fails for any reason.</p>
<name>AuthLDAPInitialBindAsUser</name>
<description>Determines if the server does the initial DN lookup using the basic authentication users'
own username, instead of anonymously or with hard-coded credentials for the server</description>
-<syntax>AuthLDAPInitialBindAsUser <em>off|on</em></syntax>
+<syntax>AuthLDAPInitialBindAsUser off|on</syntax>
<default>AuthLDAPInitialBindAsUser off</default>
<contextlist><context>directory</context><context>.htaccess</context>
</contextlist>
<name>AuthLDAPInitialBindPattern</name>
<description>Specifies the transformation of the basic authentication username to be used when binding to the LDAP server
to perform a DN lookup</description>
-<syntax>AuthLDAPInitialBindPattern<em><var>regex</var> <var>substitution</var></em></syntax>
+<syntax>AuthLDAPInitialBindPattern <em><var>regex</var> <var>substitution</var></em></syntax>
<default>AuthLDAPInitialBindPattern (.*) $1 (remote username used verbatim)</default>
<contextlist><context>directory</context><context>.htaccess</context>
</contextlist>
<usage>
<p>If <directive module="mod_authnz_ldap">AuthLDAPInitialBindAsUser</directive> is set to
<em>ON</em>, the basic authentication username will be transformed according to the
- regular expression and substituion arguments.</p>
+ regular expression and substitution arguments.</p>
<p> The regular expression argument is compared against the current basic authentication username.
The substitution argument may contain backreferences, but has no other variable interpolation.</p>
<directive module="mod_authnz_ldap">AuthLDAPBindDN</directive>.
</p>
- <highlight language="config"> AuthLDAPInitialBindPattern (.+) $1@example.com </highlight>
- <highlight language="config"> AuthLDAPInitialBindPattern (.+) cn=$1,dc=example,dc=com</highlight>
+ <highlight language="config">
+AuthLDAPInitialBindPattern (.+) $1@example.com
+ </highlight>
+ <highlight language="config">
+AuthLDAPInitialBindPattern (.+) cn=$1,dc=example,dc=com
+ </highlight>
<note><title>Not available with authorization-only</title>
This directive can only be used if this module authenticates the user, and
<directivesynopsis>
<name>AuthLDAPBindPassword</name>
-<description>Password used in conjuction with the bind DN</description>
+<description>Password used in conjunction with the bind DN</description>
<syntax>AuthLDAPBindPassword <em>password</em></syntax>
<contextlist><context>directory</context><context>.htaccess</context>
</contextlist>
<override>AuthConfig</override>
-<compatibility><em>exec:</em> was added in 2.4.6.</compatibility>
+<compatibility><em>exec:</em> was added in 2.4.5.</compatibility>
<usage>
<p>A bind password to use in conjunction with the bind DN. Note
that the bind password is probably sensitive data, and should be
properly protected. You should only use the <directive
module="mod_authnz_ldap">AuthLDAPBindDN</directive> and <directive
- module="mod_authnz_ldap">AuthLDAPBindPassword</directive> if you
+ >AuthLDAPBindPassword</directive> if you
absolutely need them to search the directory.</p>
<p>If the value begins with exec: the resulting command will be
executed and the first line returned to standard output by the
program will be used as the password.</p>
-<example><pre>
+<highlight language="config">
#Password used as-is
AuthLDAPBindPassword secret
#Run /path/to/otherProgram and provide arguments
AuthLDAPBindPassword "exec:/path/to/otherProgram argument1"
-</pre></example>
+</highlight>
</usage>
</directivesynopsis>
<note><title>Nested groups performance</title>
<p> When <directive>AuthLDAPSubGroupAttribute</directive> overlaps with
<directive>AuthLDAPGroupAttribute</directive> (as it does by default and
- as required by common LDAP schemas), uncached searching for subgroups in
- large groups can be very slow. If you use large, non-nested groups, keep
+ as required by common LDAP schemas), uncached searching for subgroups in
+ large groups can be very slow. If you use large, non-nested groups, keep
<directive>AuthLDAPMaxSubGroupDepth</directive> set to zero.</p>
</note>
value of the attribute specified. Make sure that this attribute is
included in the list of attributes in the AuthLDAPUrl definition,
otherwise this directive will have no effect. This directive, if
- present, takes precedence over AuthLDAPRemoteUserIsDN. This
+ present, takes precedence over <directive module="mod_authnz_ldap"
+ >AuthLDAPRemoteUserIsDN</directive>. This
directive is useful should you want people to log into a website
using an email address, but a backend application expects the
username as a userid.</p>
+ <p> This directive only has effect when this module is used for
+ authentication.</p>
</usage>
</directivesynopsis>
distinguished name of the authenticated user, rather than just
the username that was passed by the client. It is turned off by
default.</p>
+ <p> This directive only has effect when this module is used for
+ authentication.</p>
</usage>
</directivesynopsis>
<usage>
<p>An LDAP group object may contain members that are users and
members that are groups (called nested or sub groups). The
- <code>AuthLDAPSubGroupAttribute</code> directive identifies the
- labels of group members and the <code>AuthLDAPGroupAttribute</code>
+ <directive>AuthLDAPSubGroupAttribute</directive> directive identifies the
+ labels of group members and the <directive module="mod_authnz_ldap"
+ >AuthLDAPGroupAttribute</directive>
directive identifies the labels of the user members. Multiple
attributes can be used by specifying this directive multiple times.
If not specified, then <module>mod_authnz_ldap</module> uses the
<usage>
<p>An LDAP group object may contain members that are users and
members that are groups (called nested or sub groups). The
- <code>AuthLDAPSubGroupAttribute</code> directive identifies the
+ <directive module="mod_authnz_ldap">AuthLDAPSubGroupAttribute</directive>
+ directive identifies the
labels of members that may be sub-groups of the current group
- (as opposed to user members). The <code>AuthLDAPSubGroupClass</code>
+ (as opposed to user members). The <directive>AuthLDAPSubGroupClass</directive>
directive specifies the LDAP objectClass values used in verifying that
these potential sub-groups are in fact group objects. Verified sub-groups
can then be searched for more user or sub-group members. Multiple
to use. The syntax of the URL is</p>
<example>ldap://host:port/basedn?attribute?scope?filter</example>
<p>If you want to specify more than one LDAP URL that Apache should try in turn, the syntax is:</p>
-<highlight language="config">AuthLDAPUrl "ldap://ldap1.example.com ldap2.example.com/dc=..."</highlight>
+<highlight language="config">
+AuthLDAPUrl "ldap://ldap1.example.com ldap2.example.com/dc=..."
+</highlight>
<p><em><strong>Caveat: </strong>If you specify multiple servers, you need to enclose the entire URL string in quotes;
otherwise you will get an error: "AuthLDAPURL takes one argument, URL to define LDAP connection.." </em>
You can of course use search parameters on each of these.</p>
will search for all objects in the tree. Filters are
limited to approximately 8000 characters (the definition of
<code>MAX_STRING_LEN</code> in the Apache source code). This
- should be more than sufficient for any application. The keyword
- <code>none</code> disables the use of a filter; this is required
- by some primitive LDAP servers.</dd>
+ should be more than sufficient for any application. In 2.4.10 and later,
+ the keyword <code>none</code> disables the use of a filter; this is
+ required by some primitive LDAP servers.</dd>
</dl>
<p>When doing searches, the attribute, filter and username passed
</dl>
<p>See above for examples of <directive
- module="mod_authnz_ldap">AuthLDAPURL</directive> URLs.</p>
+ module="mod_authnz_ldap">AuthLDAPUrl</directive> URLs.</p>
</usage>
</directivesynopsis>
projects / apache / blobdiff