elif test "$PORTNAME" = "aix"; then
# AIX's xlc has to have strict aliasing turned off too
PGAC_PROG_CC_CFLAGS_OPT([-qnoansialias])
+ PGAC_PROG_CC_CFLAGS_OPT([-qlonglong])
elif test "$PORTNAME" = "hpux"; then
# On some versions of HP-UX, libm functions do not set errno by default.
# Fix that by using +Olibmerrno if the compiler recognizes it.
fi
fi
+#
+# Pthreads
+#
+# For each platform, we need to know about any special compile and link
+# libraries, and whether the normal C function names are thread-safe.
+# See the comment at the top of src/port/thread.c for more information.
+# WIN32 doesn't need the pthread tests; it always uses threads
+#
+# These tests are run before the library-tests, because linking with the
+# other libraries can pull in the pthread functions as a side-effect. We
+# want to use the -pthread or similar flags directly, and not rely on
+# the side-effects of linking with some other library.
+#
+# note: We have to use AS_IF here rather than plain if. The AC_CHECK_HEADER
+# invocation below is the first one in the script, and autoconf generates
+# additional code for that, which must not be inside the if-block. AS_IF
+# knows how to do that.
+AS_IF([test "$enable_thread_safety" = yes -a "$PORTNAME" != "win32"],
+[ # then
+AX_PTHREAD # set thread flags
+
+# Some platforms use these, so just define them. They can't hurt if they
+# are not supported. For example, on Solaris -D_POSIX_PTHREAD_SEMANTICS
+# enables 5-arg getpwuid_r, among other things.
+PTHREAD_CFLAGS="$PTHREAD_CFLAGS -D_REENTRANT -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS"
+
+# Check for *_r functions
+_CFLAGS="$CFLAGS"
+_LIBS="$LIBS"
+CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
+LIBS="$LIBS $PTHREAD_LIBS"
+
+AC_CHECK_HEADER(pthread.h, [], [AC_MSG_ERROR([
+pthread.h not found; use --disable-thread-safety to disable thread safety])])
+
+AC_CHECK_FUNCS([strerror_r getpwuid_r gethostbyname_r])
+
+# Do test here with the proper thread flags
+PGAC_FUNC_STRERROR_R_INT
+
+CFLAGS="$_CFLAGS"
+LIBS="$_LIBS"
+
+], [ # else
+# do not use values from template file
+PTHREAD_CFLAGS=
+PTHREAD_LIBS=
+]) # fi
+
+AC_SUBST(PTHREAD_CFLAGS)
+AC_SUBST(PTHREAD_LIBS)
+
##
## Libraries
AC_CHECK_LIB(xslt, xsltCleanupGlobals, [], [AC_MSG_ERROR([library 'xslt' is required for XSLT support])])
fi
+# Note: We can test for libldap_r only after we know PTHREAD_LIBS
+if test "$with_ldap" = yes ; then
+ _LIBS="$LIBS"
+ if test "$PORTNAME" != "win32"; then
+ AC_CHECK_LIB(ldap, ldap_bind, [],
+ [AC_MSG_ERROR([library 'ldap' is required for LDAP])],
+ [$EXTRA_LDAP_LIBS])
+ LDAP_LIBS_BE="-lldap $EXTRA_LDAP_LIBS"
+ if test "$enable_thread_safety" = yes; then
+ # on some platforms ldap_r fails to link without PTHREAD_LIBS
+ AC_CHECK_LIB(ldap_r, ldap_simple_bind, [],
+ [AC_MSG_ERROR([library 'ldap_r' is required for LDAP])],
+ [$PTHREAD_CFLAGS $PTHREAD_LIBS $EXTRA_LDAP_LIBS])
+ LDAP_LIBS_FE="-lldap_r $EXTRA_LDAP_LIBS"
+ else
+ LDAP_LIBS_FE="-lldap $EXTRA_LDAP_LIBS"
+ fi
+ else
+ AC_CHECK_LIB(wldap32, ldap_bind, [], [AC_MSG_ERROR([library 'wldap32' is required for LDAP])])
+ LDAP_LIBS_FE="-lwldap32"
+ LDAP_LIBS_BE="-lwldap32"
+ fi
+ LIBS="$_LIBS"
+fi
+AC_SUBST(LDAP_LIBS_FE)
+AC_SUBST(LDAP_LIBS_BE)
+
# for contrib/sepgsql
if test "$with_selinux" = yes; then
AC_CHECK_LIB(selinux, security_compute_create_name, [],
m4_defun([AC_PROG_CC_STDC], []) dnl We don't want that.
AC_C_BIGENDIAN
-PGAC_C_INLINE
+AC_C_INLINE
PGAC_PRINTF_ARCHETYPE
AC_C_FLEXIBLE_ARRAY_MEMBER
PGAC_C_SIGNED
LIBS_including_readline="$LIBS"
LIBS=`echo "$LIBS" | sed -e 's/-ledit//g' -e 's/-lreadline//g'`
-AC_CHECK_FUNCS([cbrt dlopen fdatasync getifaddrs getpeerucred getrlimit mbstowcs_l memmove poll pstat pthread_is_threaded_np readlink setproctitle setsid shm_open sigprocmask symlink sync_file_range towlower utime utimes wcstombs wcstombs_l])
+AC_CHECK_FUNCS([cbrt dlopen fdatasync getifaddrs getpeerucred getrlimit mbstowcs_l memmove poll pstat pthread_is_threaded_np readlink setproctitle setsid shm_open symlink sync_file_range towlower utime utimes wcstombs wcstombs_l])
AC_REPLACE_FUNCS(fseeko)
case $host_os in
AC_LIBOBJ(dirmod)
fi
-dnl Cannot use AC_CHECK_FUNC because sigsetjmp may be a macro
-dnl (especially on GNU libc)
-dnl See also comments in c.h.
-AC_CACHE_CHECK([for sigsetjmp], pgac_cv_func_sigsetjmp,
-[AC_LINK_IFELSE([AC_LANG_PROGRAM([#include <setjmp.h>],
- [sigjmp_buf x; sigsetjmp(x, 1);])],
- [pgac_cv_func_sigsetjmp=yes],
- [pgac_cv_func_sigsetjmp=no])])
-if test x"$pgac_cv_func_sigsetjmp" = x"yes"; then
- AC_DEFINE(HAVE_SIGSETJMP, 1, [Define to 1 if you have sigsetjmp().])
-fi
-
AC_CHECK_DECLS([sys_siglist], [], [],
[#include <signal.h>
/* NetBSD declares sys_siglist in unistd.h. */
fi
-#
-# Pthreads
-#
-# For each platform, we need to know about any special compile and link
-# libraries, and whether the normal C function names are thread-safe.
-# See the comment at the top of src/port/thread.c for more information.
-# WIN32 doesn't need the pthread tests; it always uses threads
-if test "$enable_thread_safety" = yes -a "$PORTNAME" != "win32"; then
-AX_PTHREAD # set thread flags
-
-# Some platforms use these, so just define them. They can't hurt if they
-# are not supported. For example, on Solaris -D_POSIX_PTHREAD_SEMANTICS
-# enables 5-arg getpwuid_r, among other things.
-PTHREAD_CFLAGS="$PTHREAD_CFLAGS -D_REENTRANT -D_THREAD_SAFE -D_POSIX_PTHREAD_SEMANTICS"
-
-# Check for *_r functions
-_CFLAGS="$CFLAGS"
-_LIBS="$LIBS"
-CFLAGS="$CFLAGS $PTHREAD_CFLAGS"
-LIBS="$LIBS $PTHREAD_LIBS"
-
-if test "$PORTNAME" != "win32"; then
-AC_CHECK_HEADER(pthread.h, [], [AC_MSG_ERROR([
-pthread.h not found; use --disable-thread-safety to disable thread safety])])
-fi
-
-AC_CHECK_FUNCS([strerror_r getpwuid_r gethostbyname_r])
-
-# Do test here with the proper thread flags
-PGAC_FUNC_STRERROR_R_INT
-
-CFLAGS="$_CFLAGS"
-LIBS="$_LIBS"
-
-else
-# do not use values from template file
-PTHREAD_CFLAGS=
-PTHREAD_LIBS=
-fi
-
-AC_SUBST(PTHREAD_CFLAGS)
-AC_SUBST(PTHREAD_LIBS)
-
-
-# We can test for libldap_r only after we know PTHREAD_LIBS
-if test "$with_ldap" = yes ; then
- _LIBS="$LIBS"
- if test "$PORTNAME" != "win32"; then
- AC_CHECK_LIB(ldap, ldap_bind, [],
- [AC_MSG_ERROR([library 'ldap' is required for LDAP])],
- [$EXTRA_LDAP_LIBS])
- LDAP_LIBS_BE="-lldap $EXTRA_LDAP_LIBS"
- if test "$enable_thread_safety" = yes; then
- # on some platforms ldap_r fails to link without PTHREAD_LIBS
- AC_CHECK_LIB(ldap_r, ldap_simple_bind, [],
- [AC_MSG_ERROR([library 'ldap_r' is required for LDAP])],
- [$PTHREAD_CFLAGS $PTHREAD_LIBS $EXTRA_LDAP_LIBS])
- LDAP_LIBS_FE="-lldap_r $EXTRA_LDAP_LIBS"
- else
- LDAP_LIBS_FE="-lldap $EXTRA_LDAP_LIBS"
- fi
- else
- AC_CHECK_LIB(wldap32, ldap_bind, [], [AC_MSG_ERROR([library 'wldap32' is required for LDAP])])
- LDAP_LIBS_FE="-lwldap32"
- LDAP_LIBS_BE="-lwldap32"
- fi
- LIBS="$_LIBS"
-fi
-AC_SUBST(LDAP_LIBS_FE)
-AC_SUBST(LDAP_LIBS_BE)
-
-
# This test makes sure that run tests work at all. Sometimes a shared
# library is found by the linker, but the runtime linker can't find it.
# This check should come after all modifications of compiler or linker
AC_CHECK_TYPES([int8, uint8, int64, uint64], [], [],
[#include <stdio.h>])
-# We also check for sig_atomic_t, which *should* be defined per ANSI
-# C, but is missing on some old platforms.
-AC_CHECK_TYPES(sig_atomic_t, [], [], [#include <signal.h>])
-
# Check for extensions offering the integer scalar type __int128.
PGAC_TYPE_128BIT_INT
AC_SUBST(PG_CRC32C_OBJS)
-# Check that POSIX signals are available if thread safety is enabled.
-if test "$PORTNAME" != "win32"
-then
-PGAC_FUNC_POSIX_SIGNALS
-if test "$pgac_cv_func_posix_signals" != yes -a "$enable_thread_safety" = yes; then
- AC_MSG_ERROR([
-Thread-safety requires POSIX signals, which are not supported by this
-operating system; use --disable-thread-safety to disable thread safety.])
-fi
-fi
-
-
# Select semaphore implementation type.
if test "$PORTNAME" != "win32"; then
if test x"$USE_NAMED_POSIX_SEMAPHORES" = x"1" ; then