#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for PostgreSQL 8.2beta1.
+# Generated by GNU Autoconf 2.59 for PostgreSQL 8.2beta2.
#
# Report bugs to <pgsql-bugs@postgresql.org>.
#
# Identity of this package.
PACKAGE_NAME='PostgreSQL'
PACKAGE_TARNAME='postgresql'
-PACKAGE_VERSION='8.2beta1'
-PACKAGE_STRING='PostgreSQL 8.2beta1'
+PACKAGE_VERSION='8.2beta2'
+PACKAGE_STRING='PostgreSQL 8.2beta2'
PACKAGE_BUGREPORT='pgsql-bugs@postgresql.org'
ac_unique_file="src/backend/access/common/heaptuple.c"
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
-\`configure' configures PostgreSQL 8.2beta1 to adapt to many kinds of systems.
+\`configure' configures PostgreSQL 8.2beta2 to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
if test -n "$ac_init_help"; then
case $ac_init_help in
- short | recursive ) echo "Configuration of PostgreSQL 8.2beta1:";;
+ short | recursive ) echo "Configuration of PostgreSQL 8.2beta2:";;
esac
cat <<\_ACEOF
test -n "$ac_init_help" && exit 0
if $ac_init_version; then
cat <<\_ACEOF
-PostgreSQL configure 8.2beta1
+PostgreSQL configure 8.2beta2
generated by GNU Autoconf 2.59
Copyright (C) 2003 Free Software Foundation, Inc.
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
-It was created by PostgreSQL $as_me 8.2beta1, which was
+It was created by PostgreSQL $as_me 8.2beta2, which was
generated by GNU Autoconf 2.59. Invocation command line was
$ $0 $@
-for ac_prog in 'bison -y'
+if test -z "$YACC"; then
+ for ac_prog in 'bison -y'
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
done
-if test "$YACC"; then
- if $YACC --version | sed q | $AWK '{ if ($4 < 1.875) exit 0; else exit 1;}'; then
- { echo "$as_me:$LINENO: WARNING:
-*** If you are going to modify the grammar files or build from CVS, the installed
-*** version of Bison is too old. Bison version 1.875 or later is required." >&5
+ if test "$YACC"; then
+ if $YACC --version | sed q | $AWK '{ if ($4 < 1.875) exit 0; else exit 1;}'; then
+ { echo "$as_me:$LINENO: WARNING:
+*** The installed version of Bison is too old to use with PostgreSQL.
+*** Bison version 1.875 or later is required." >&5
echo "$as_me: WARNING:
-*** If you are going to modify the grammar files or build from CVS, the installed
-*** version of Bison is too old. Bison version 1.875 or later is required." >&2;}
+*** The installed version of Bison is too old to use with PostgreSQL.
+*** Bison version 1.875 or later is required." >&2;}
+ YACC=""
+ fi
fi
-fi
-if test -z "$YACC"; then
- { echo "$as_me:$LINENO: WARNING:
-*** Without Bison you will not be able to build PostgreSQL from CVS or
+ if test -z "$YACC"; then
+ { echo "$as_me:$LINENO: WARNING:
+*** Without Bison you will not be able to build PostgreSQL from CVS nor
*** change any of the parser definition files. You can obtain Bison from
*** a GNU mirror site. (If you are using the official distribution of
-*** PostgreSQL then you do not need to worry about this because the Bison
+*** PostgreSQL then you do not need to worry about this, because the Bison
*** output is pre-generated.) To use a different yacc program (possible,
*** but not recommended), set the environment variable YACC before running
*** 'configure'." >&5
echo "$as_me: WARNING:
-*** Without Bison you will not be able to build PostgreSQL from CVS or
+*** Without Bison you will not be able to build PostgreSQL from CVS nor
*** change any of the parser definition files. You can obtain Bison from
*** a GNU mirror site. (If you are using the official distribution of
-*** PostgreSQL then you do not need to worry about this because the Bison
+*** PostgreSQL then you do not need to worry about this, because the Bison
*** output is pre-generated.) To use a different yacc program (possible,
*** but not recommended), set the environment variable YACC before running
*** 'configure'." >&2;}
+ fi
fi
echo "$as_me:$LINENO: result: yes" >&5
echo "${ECHO_T}yes" >&6
case $host_os in
- openbsd*|freebsd4*)
- { { echo "$as_me:$LINENO: error: *** Threaded Python not supported on this platform ***" >&5
-echo "$as_me: error: *** Threaded Python not supported on this platform ***" >&2;}
+ openbsd*|freebsd*)
+ { { echo "$as_me:$LINENO: error: threaded Python not supported on this platform" >&5
+echo "$as_me: error: threaded Python not supported on this platform" >&2;}
{ (exit 1); exit 1; }; }
;;
esac
-for ac_header in crypt.h dld.h endian.h fp_class.h getopt.h ieeefp.h langinfo.h poll.h pwd.h sys/ipc.h sys/poll.h sys/pstat.h sys/select.h sys/sem.h sys/socket.h sys/shm.h sys/time.h sys/un.h termios.h utime.h wchar.h wctype.h kernel/OS.h kernel/image.h SupportDefs.h
+
+for ac_header in crypt.h dld.h endian.h fp_class.h getopt.h ieeefp.h langinfo.h poll.h pwd.h sys/ipc.h sys/poll.h sys/pstat.h sys/resource.h sys/select.h sys/sem.h sys/socket.h sys/shm.h sys/time.h sys/un.h termios.h utime.h wchar.h wctype.h kernel/OS.h kernel/image.h SupportDefs.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
if eval "test \"\${$as_ac_Header+set}\" = set"; then
done
+# Note: in a libedit installation, history.h is sometimes a dummy, and may
+# not be there at all. Hence, don't complain if not found. We must check
+# though, since in yet other versions it is an independent header.
for ac_header in editline/history.h
do
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
-else
- { { echo "$as_me:$LINENO: error: history header not found
-If you have libedit already installed, see config.log for details on the
-failure. It is possible the compiler isn't looking in the proper directory.
-Use --without-readline to disable libedit support." >&5
-echo "$as_me: error: history header not found
-If you have libedit already installed, see config.log for details on the
-failure. It is possible the compiler isn't looking in the proper directory.
-Use --without-readline to disable libedit support." >&2;}
- { (exit 1); exit 1; }; }
fi
done
-for ac_func in cbrt dlopen fcvt fdatasync getpeereid memmove poll pstat readlink setproctitle setsid sigprocmask symlink sysconf towlower utime utimes waitpid wcstombs
+
+for ac_func in cbrt dlopen fcvt fdatasync getpeereid getrlimit memmove poll pstat readlink setproctitle setsid sigprocmask symlink sysconf towlower utime utimes waitpid wcstombs
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
echo "$as_me:$LINENO: checking for $ac_func" >&5
ac_cv_func_fseeko=yes
esac
-# Solaris has a very slow qsort in certain cases, so we replace it:
-# http://forum.sun.com/thread.jspa?forumID=4&threadID=7231
-# Supposedly it is fixed in Solaris, but not sure which version, and
-# no confirmed testing. 2005-12-16
-if test "$PORTNAME" = "solaris"; then
-case $LIBOBJS in
- "qsort.$ac_objext" | \
- *" qsort.$ac_objext" | \
- "qsort.$ac_objext "* | \
- *" qsort.$ac_objext "* ) ;;
- *) LIBOBJS="$LIBOBJS qsort.$ac_objext" ;;
-esac
-
-fi
-
# Win32 support
if test "$PORTNAME" = "win32"; then
case $LIBOBJS in
# Let's see who fails, perhaps AIX. 2004-04-23
if test "$PTHREAD_CC" != "$CC"; then
{ { echo "$as_me:$LINENO: error:
-PostgreSQL does not support platforms that require a special
-compiler binary for thread-safety.
-" >&5
+PostgreSQL does not support platforms that require a special compiler
+for thread safety." >&5
echo "$as_me: error:
-PostgreSQL does not support platforms that require a special
-compiler binary for thread-safety.
-" >&2;}
+PostgreSQL does not support platforms that require a special compiler
+for thread safety." >&2;}
{ (exit 1); exit 1; }; }
fi
if test "$THREAD_SUPPORT" = no; then
-{ { echo "$as_me:$LINENO: error:
-Cannot enable threads on your platform.
-Your platform is known to not support thread-safe programs.
-For details, compile and run src/bin/pg_thread_test.
-" >&5
-echo "$as_me: error:
-Cannot enable threads on your platform.
-Your platform is known to not support thread-safe programs.
-For details, compile and run src/bin/pg_thread_test.
-" >&2;}
+{ { echo "$as_me:$LINENO: error: cannot enable threads on this platform
+This platform is known to not support thread-safe programs. For details,
+compile and run src/bin/pg_thread_test." >&5
+echo "$as_me: error: cannot enable threads on this platform
+This platform is known to not support thread-safe programs. For details,
+compile and run src/bin/pg_thread_test." >&2;}
{ (exit 1); exit 1; }; }
fi
echo "$as_me:$LINENO: result: failed" >&5
echo "${ECHO_T}failed" >&6
{ { echo "$as_me:$LINENO: error:
-*** Could not execute a simple test program. This may be a problem
-*** related to locating shared libraries. Check the file 'config.log'
-*** for the exact reason." >&5
+Could not execute a simple test program. This may be a problem
+related to locating shared libraries. Check the file 'config.log'
+for the exact reason." >&5
echo "$as_me: error:
-*** Could not execute a simple test program. This may be a problem
-*** related to locating shared libraries. Check the file 'config.log'
-*** for the exact reason." >&2;}
+Could not execute a simple test program. This may be a problem
+related to locating shared libraries. Check the file 'config.log'
+for the exact reason." >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
if test "$pgac_cv_func_posix_signals" != yes -a "$enable_thread_safety" = yes; then
{ { echo "$as_me:$LINENO: error:
-*** Thread-safety requires POSIX signals, which are not supported by your
-*** operating system.
-" >&5
+Thread-safety requires POSIX signals, which are not supported by this
+operating system." >&5
echo "$as_me: error:
-*** Thread-safety requires POSIX signals, which are not supported by your
-*** operating system.
-" >&2;}
+Thread-safety requires POSIX signals, which are not supported by this
+operating system." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
then
{ echo "$as_me:$LINENO: WARNING:
*** Skipping thread test program. --enable-thread-safety-force was used.
-*** Run the program in src/test/thread on the your machine and add
-proper locking function calls to your applications to guarantee thread
-safety.
+*** Run the program in src/test/thread on the your machine and add proper
+*** locking function calls to your applications to guarantee thread safety.
" >&5
echo "$as_me: WARNING:
*** Skipping thread test program. --enable-thread-safety-force was used.
-*** Run the program in src/test/thread on the your machine and add
-proper locking function calls to your applications to guarantee thread
-safety.
+*** Run the program in src/test/thread on the your machine and add proper
+*** locking function calls to your applications to guarantee thread safety.
" >&2;}
else
-{ echo "$as_me:$LINENO: WARNING: *** Skipping thread test on Win32" >&5
-echo "$as_me: WARNING: *** Skipping thread test on Win32" >&2;}
+{ echo "$as_me:$LINENO: WARNING: *** skipping thread test on Win32" >&5
+echo "$as_me: WARNING: *** skipping thread test on Win32" >&2;}
fi
elif test "$enable_thread_safety" = yes; then
if test x"$template" != x"win32"
( exit $ac_status )
echo "$as_me:$LINENO: result: no" >&5
echo "${ECHO_T}no" >&6
- { { echo "$as_me:$LINENO: error:
-*** Thread test program failed. Your platform is not thread-safe.
-*** Check the file 'config.log'for the exact reason.
-***
-*** You can use the configure option --enable-thread-safety-force
-*** to force threads to be enabled. However, you must then run
-*** the program in src/test/thread and add locking function calls
-*** to your applications to guarantee thread safety.
-" >&5
-echo "$as_me: error:
-*** Thread test program failed. Your platform is not thread-safe.
-*** Check the file 'config.log'for the exact reason.
-***
-*** You can use the configure option --enable-thread-safety-force
-*** to force threads to be enabled. However, you must then run
-*** the program in src/test/thread and add locking function calls
-*** to your applications to guarantee thread safety.
-" >&2;}
+ { { echo "$as_me:$LINENO: error: thread test program failed
+This platform is not thread-safe. Check the file 'config.log'for the
+exact reason.
+
+You can use the configure option --enable-thread-safety-force to force
+threads to be enabled. But you must then run the program in
+src/test/thread and add locking function calls to your applications to
+guarantee thread safety." >&5
+echo "$as_me: error: thread test program failed
+This platform is not thread-safe. Check the file 'config.log'for the
+exact reason.
+
+You can use the configure option --enable-thread-safety-force to force
+threads to be enabled. But you must then run the program in
+src/test/thread and add locking function calls to your applications to
+guarantee thread safety." >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
CFLAGS="$_CFLAGS"
LIBS="$_LIBS"
else
-{ echo "$as_me:$LINENO: WARNING: *** Skipping thread test on Win32" >&5
-echo "$as_me: WARNING: *** Skipping thread test on Win32" >&2;}
+{ echo "$as_me:$LINENO: WARNING: *** skipping thread test on Win32" >&5
+echo "$as_me: WARNING: *** skipping thread test on Win32" >&2;}
fi
fi
#
- for var in `set |sed -ne '/^\(with_\|enable\_\)/ s/=.*//p'` ; do
- case $var in
- with_template) ;;
+ for pgac_var in `set | sed 's/=.*//' | $EGREP 'with_|enable_'`; do
+ case $pgac_var in
+ with_template) ;;
with_docdir) ;;
with_includes) ;;
with_libraries) ;;
with_libedit_preferred) ;;
with_zlib) ;;
- with_gnu_ld) ;;
- *)
- echo -n "*** Option ignored: "
- echo $var | sed -e 's/\(^=*\)/--\1/;s/_/-/g'
- ;;
- esac
+ with_gnu_ld) ;;
+ *)
+ pgac_txt=`echo $pgac_var | tr '_' '-'`
+ { echo "$as_me:$LINENO: WARNING: option ignored: --$pgac_txt" >&5
+echo "$as_me: WARNING: option ignored: --$pgac_txt" >&2;}
+ ;;
+ esac
done
} >&5
cat >&5 <<_CSEOF
-This file was extended by PostgreSQL $as_me 8.2beta1, which was
+This file was extended by PostgreSQL $as_me 8.2beta2, which was
generated by GNU Autoconf 2.59. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
-PostgreSQL config.status 8.2beta1
+PostgreSQL config.status 8.2beta2
configured by $0, generated by GNU Autoconf 2.59,
with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
for FILE in $CONFIG_LINKS
do
# test -e works for symlinks in the MinGW console
- test -e `expr "$FILE" : '\([^:]*\)'` || { echo "$as_me:$LINENO: WARNING: *** link for $FILE - please fix by hand" >&5
-echo "$as_me: WARNING: *** link for $FILE - please fix by hand" >&2;}
+ test -e `expr "$FILE" : '\([^:]*\)'` || { echo "$as_me:$LINENO: WARNING: *** link for $FILE -- please fix by hand" >&5
+echo "$as_me: WARNING: *** link for $FILE -- please fix by hand" >&2;}
done
;;
esac
projects / postgresql / blobdiff