test: change spi test host to macros

[esp-idf] / components / driver / test / test_spi_param.c

diff --git a/components/driver/test/test_spi_param.c b/components/driver/test/test_spi_param.c
index 87036e0cdb1636b4a222b9d677712ff90b598c22..40d91eda0d3e49d06d0076a89ffccaef9a3fed24 100644 (file)
--- a/components/driver/test/test_spi_param.c
+++ b/components/driver/test/test_spi_param.c
@@ -91,12 +91,12 @@ static void local_test_start(spi_device_handle_t *spi, int freq, const spitest_p
 
     slave_pull_up(&buscfg, slvcfg.spics_io_num);
 
-    TEST_ESP_OK(spi_bus_initialize(HSPI_HOST, &buscfg, pset->master_dma_chan));
-    TEST_ESP_OK(spi_bus_add_device(HSPI_HOST, &devcfg, spi));
+    TEST_ESP_OK(spi_bus_initialize(TEST_SPI_HOST, &buscfg, pset->master_dma_chan));
+    TEST_ESP_OK(spi_bus_add_device(TEST_SPI_HOST, &devcfg, spi));
 
     //slave automatically use iomux pins if pins are on VSPI_* pins
     buscfg.quadhd_io_num = -1;
-    TEST_ESP_OK(spi_slave_initialize(VSPI_HOST, &buscfg, &slvcfg, pset->slave_dma_chan));
+    TEST_ESP_OK(spi_slave_initialize(TEST_SLAVE_HOST, &buscfg, &slvcfg, pset->slave_dma_chan));
 
     //initialize master and slave on the same pins break some of the output configs, fix them
     if (pset->master_iomux) {
@@ -170,7 +170,7 @@ static void local_test_loop(const void* arg1, void* arg2)
             vRingbufferReturnItem(context->slave_context.data_received, rcv_data);
         }
         master_free_device_bus(spi);
-        TEST_ASSERT(spi_slave_free(VSPI_HOST) == ESP_OK);
+        TEST_ASSERT(spi_slave_free(TEST_SLAVE_HOST) == ESP_OK);
     }
 }
 
@@ -504,8 +504,8 @@ static void test_master_start(spi_device_handle_t *spi, int freq, const spitest_
     devpset.input_delay_ns = pset->slave_tv_ns;
     devpset.clock_speed_hz = freq;
     if (pset->master_limit != 0 && freq > pset->master_limit) devpset.flags |= SPI_DEVICE_NO_DUMMY;
-    TEST_ESP_OK(spi_bus_initialize(HSPI_HOST, &buspset, pset->master_dma_chan));
-    TEST_ESP_OK(spi_bus_add_device(HSPI_HOST, &devpset, spi));
+    TEST_ESP_OK(spi_bus_initialize(TEST_SPI_HOST, &buspset, pset->master_dma_chan));
+    TEST_ESP_OK(spi_bus_add_device(TEST_SPI_HOST, &devpset, spi));
 
     //prepare data for the slave
     for (int i = 0; i < pset->test_size; i ++) {
@@ -624,7 +624,7 @@ static void timing_slave_start(int speed, const spitest_param_set_t* pset, spite
     //Enable pull-ups on SPI lines so we don't detect rogue pulses when no master is connected.
     slave_pull_up(&slv_buscfg, slvcfg.spics_io_num);
 
-    TEST_ESP_OK( spi_slave_initialize(VSPI_HOST, &slv_buscfg, &slvcfg, pset->slave_dma_chan) );
+    TEST_ESP_OK(spi_slave_initialize(TEST_SLAVE_HOST, &slv_buscfg, &slvcfg, pset->slave_dma_chan));
 
     //prepare data for the master
     for (int i = 0; i < pset->test_size; i++) {
@@ -684,7 +684,7 @@ static void test_slave_loop(const void *arg1, void* arg2)
             //clean
             vRingbufferReturnItem( context->slave_context.data_received, rcv_data );
         }
-        TEST_ASSERT(spi_slave_free(VSPI_HOST) == ESP_OK);
+        TEST_ASSERT(spi_slave_free(TEST_SLAVE_HOST) == ESP_OK);
     }
 }