#!/bin/sh
-
-# TODO - Steal the new PHP buildconf and build.mk.
-# This will do for now, though
-
-supplied_flag=$1
-
-# do some version checking for the tools we use
-if test "$1" = "--force"; then
- shift
-# this is a posix correct "test -nt"
-elif test "`ls -t buildconf buildconf.stamp 2>/dev/null |head -1`" != "buildconf"; then
- :
-else
- echo "buildconf: checking installation..."
-
- # autoconf will check for the version itself
- # automake 1.4 or newer
- am_version=`automake --version 2>/dev/null|head -1|sed -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'`
- if test "$am_version" = ""; then
- echo "buildconf: automake not found."
- echo " You need automake version 1.4 or newer installed"
- echo " to build APACHE from CVS."
- exit 1
- fi
- IFS=.; set $am_version; IFS=' '
- if test "$1" = "1" -a "$2" -lt "4" || test "$1" -lt "1"; then
- echo "buildconf: automake version $am_version found."
- echo " You need automake version 1.4 or newer installed"
- echo " to build APACHE from CVS."
- exit 1
- else
- echo "buildconf: automake version $am_version (ok)"
- fi
-
- # libtool 1.3.3 or newer
- lt_pversion=`libtool --version 2>/dev/null|sed -e 's/^[^0-9]*//' -e 's/[- ].*//'`
- if test "$lt_pversion" = ""; then
- echo "buildconf: libtool not found."
- echo " You need libtool version 1.3 or newer installed"
- echo " to build APACHE from CVS."
- exit 1
- fi
- lt_version=`echo $lt_pversion|sed -e 's/\([a-z]*\)$/.\1/'`
- IFS=.; set $lt_version; IFS=' '
- if test "$1" -gt "1" || test "$2" -gt "3" || test "$2" = "3" -a "$3" -ge "3"
- then
- echo "buildconf: libtool version $lt_pversion (ok)"
- else
- echo "buildconf: libtool version $lt_pversion found."
- echo " You need libtool version 1.3.3 or newer installed"
- echo " to build APACHE from CVS."
- exit 1
- fi
- touch buildconf.stamp
-fi
-
-am_prefix=`which automake | sed -e 's#/[^/]*/[^/]*$##'`
-lt_prefix=`which libtool | sed -e 's#/[^/]*/[^/]*$##'`
-if test "$am_prefix" != "$lt_prefix"; then
- echo "buildconf: WARNING: automake and libtool are installed in different"
- echo " directories. This may cause aclocal to fail."
- echo "buildconf: continuing anyway"
-fi
-
-if test "$supplied_flag" = "--copy"; then
- automake_flags=--copy
+#
+# Copyright 1999-2004 The Apache Software Foundation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# buildconf: Build the support scripts needed to compile from a
+# checked-out version of the source code.
+
+# set a couple of defaults for where we should be looking for our support libs.
+# can be overridden with --with-apr=[dir] and --with-apr-util=[dir]
+
+apr_src_dir=srclib/apr
+apu_src_dir=srclib/apr-util
+
+while test $# -gt 0
+do
+ # Normalize
+ case "$1" in
+ -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) optarg= ;;
+ esac
+
+ case "$1" in
+ --with-apr=*)
+ apr_src_dir=$optarg
+ ;;
+ esac
+
+ case "$1" in
+ --with-apr-util=*)
+ apu_src_dir=$optarg
+ ;;
+ esac
+
+ shift
+done
+
+#
+# Check to be sure that we have the srclib dependencies checked-out
+#
+
+if [ ! -d "$apr_src_dir" -o ! -f "$apr_src_dir/build/apr_common.m4" ]; then
+ echo ""
+ echo "You don't have a copy of the apr source in $apr_src_dir. "
+ echo "Please get the source using the following instructions,"
+ echo "or specify the location of the source with "
+ echo "--with-apr=[path to apr] :"
+ echo ""
+ echo " cd srclib"
+ echo " cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic login"
+ echo " (password 'anoncvs')"
+ echo " cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic co apr"
+ echo ""
+ exit 1
fi
-
-./helpers/build-acconfig-header
-
-mv aclocal.m4 aclocal.m4.old 2>/dev/null
-aclocal
-if test "$?" != "0" -a "$am_prefix" != "$lt_prefix"; then
- echo "buildconf: ERROR: aclocal failed, probably because automake and"
- echo " libtool are installed with different prefixes;"
- echo " automake is installed in $am_prefix, but libtool in $lt_prefix."
- echo " Please re-install automake and/or libtool with a common prefix"
- echo " and try again."
+if [ ! -d "$apu_src_dir" -o ! -f "$apu_src_dir/Makefile.in" ]; then
+ echo ""
+ echo "You don't have a copy of the apr-util source in $apu_src_dir. "
+ echo "Please get one the source using the following instructions, "
+ echo "or specify the location of the source with "
+ echo "--with-apr-util=[path to apr-util]:"
+ echo ""
+ echo " cd srclib"
+ echo " cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic login"
+ echo " (password 'anoncvs')"
+ echo " cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic co apr-util"
+ echo ""
exit 1
fi
-if cmp aclocal.m4.old aclocal.m4 > /dev/null 2>&1; then
- echo "buildconf: keeping aclocal.m4"
- mv aclocal.m4.old aclocal.m4
-else
- echo "buildconf: created or modified aclocal.m4"
+# These are temporary until Roy finishes the other build changes
+#
+touch .deps
+rm -f aclocal.m4
+rm -f generated_lists
+
+# Remove autoconf 2.5x's cache directory
+rm -rf autom4te*.cache
+
+case "`uname`" in
+*BSD/OS*)
+ ./build/bsd_makefile;;
+esac
+#
+# end temporary stuff
+
+apr_configure="$apr_src_dir/configure"
+aprutil_configure="$apu_src_dir/configure"
+pcre_configure="srclib/pcre/configure"
+config_h_in="include/ap_config_auto.h.in"
+
+cross_compile_warning="warning: AC_TRY_RUN called without default to allow cross compiling"
+
+if [ -d srclib/apr ]; then
+ echo rebuilding $apr_configure
+ (cd srclib/apr && ./buildconf) || {
+ echo "./buildconf failed for apr"
+ exit 1
+ }
fi
-autoheader
-
-# find all Makefile.ams
-files="Makefile `find ap lib main modules regex os -name Makefile.am | sed 's#\.am##' | tr '\n' ' '`"
+if [ -d srclib/apr-util ]; then
+ echo rebuilding $aprutil_configure
+ (cd srclib/apr-util && ./buildconf) || {
+ echo "./buildconf failed for apr-util"
+ exit 1
+ }
+fi
-# suppress stupid automake warning
-automake --add-missing --include-deps $automake_flags $files 2>&1 | grep -v \$APACHE_OUTPUT_FILES >&2
+echo copying build files
+cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \
+ $apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \
+ $apr_src_dir/build/find_apr.m4 $apu_src_dir/build/find_apu.m4 build
+# Remove any libtool files so one can switch between libtool 1.3
+# and libtool 1.4 by simply rerunning the buildconf script.
+(cd build ; rm -f ltconfig ltmain.sh)
-mv configure configure.old 2>/dev/null
-autoconf
-if cmp configure.old configure > /dev/null 2>&1; then
- echo "buildconf: keeping configure"
- mv configure.old configure
-else
- echo "buildconf: created or modified configure"
+# Optionally copy libtool-1.3.x files
+if [ -f $apr_src_dir/build/ltconfig ]; then
+ cp $apr_src_dir/build/ltconfig build
+fi
+if [ -f $apr_src_dir/build/ltmain.sh ]; then
+ cp $apr_src_dir/build/ltmain.sh build
fi
-# Now do APR...
+echo rebuilding $pcre_configure
+(cd srclib/pcre && ${AUTOCONF:-autoconf})
-echo "buildconf: setting up APR"
+echo rebuilding $config_h_in
+rm -f $config_h_in
+${AUTOHEADER:-autoheader} 2>&1 | grep -v "$cross_compile_warning"
-cd lib/apr
+echo rebuilding configure
rm -f config.cache
-
-mv configure configure.old 2>/dev/null
-autoheader
-autoconf
-if cmp configure.old configure > /dev/null 2>&1; then
- echo "buildconf: keeping configure"
- mv configure.old configure
-else
- echo "buildconf: created or modified configure"
+${AUTOCONF:-autoconf} 2>&1 | grep -v "$cross_compile_warning"
+
+# Remove autoconf 2.5x's cache directory
+rm -rf autom4te*.cache
+
+if [ -f `which cut` ]; then
+ echo rebuilding rpm spec file
+ ( VMMN=`build/get-version.sh mmn include/ap_mmn.h MODULE_MAGIC_NUMBER`
+ REVISION=`build/get-version.sh all include/ap_release.h AP_SERVER`
+ VERSION=`echo $REVISION | cut -d- -s -f1`
+ RELEASE=`echo $REVISION | cut -d- -s -f2`
+ if [ "x$VERSION" = "x" ]; then
+ VERSION=$REVISION
+ RELEASE=1
+ fi
+ cat ./build/rpm/httpd.spec.in | \
+ sed -e "s/APACHE_VERSION/$VERSION/" \
+ -e "s/APACHE_RELEASE/$RELEASE/" \
+ -e "s/APACHE_MMN/$VMMN/" \
+ > httpd.spec )
fi
+# ensure that the mod_ssl expression parser sources are never regenerated
+# when running make
+echo fixing timestamps for mod_ssl sources
+cd modules/ssl
+touch ssl_expr_parse.y
+sleep 1
+touch ssl_expr_parse.c ssl_expr_parse.h ssl_expr_scan.l
+sleep 1
+touch ssl_expr_scan.c
cd ../..
-# Now run the configs...
-
-rm -f config.cache
-./configure
-
+exit 0