#!/bin/sh
-
-# TODO - Steal the new PHP buildconf and build.mk.
-# This will do for now, though
-
-supplied_flag=$1
-
-# do some version checking for the tools we use
-if test "$1" = "--force"; then
- shift
-# this is a posix correct "test -nt"
-elif test "`ls -t buildconf buildconf.stamp 2>/dev/null |head -1`" != "buildconf"; then
- :
-else
- echo "buildconf: checking installation..."
-
- # autoconf will check for the version itself
- # automake 1.4 or newer
- am_version=`automake --version 2>/dev/null|head -1|sed -e 's/^[^0-9]*//' -e 's/[a-z]* *$//'`
- if test "$am_version" = ""; then
- echo "buildconf: automake not found."
- echo " You need automake version 1.4 or newer installed"
- echo " to build APACHE from CVS."
- exit 1
- fi
- IFS=.; set $am_version; IFS=' '
- if test "$1" = "1" -a "$2" -lt "4" || test "$1" -lt "1"; then
- echo "buildconf: automake version $am_version found."
- echo " You need automake version 1.4 or newer installed"
- echo " to build APACHE from CVS."
- exit 1
- else
- echo "buildconf: automake version $am_version (ok)"
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# buildconf: Build the support scripts needed to compile from a
+# checked-out version of the source code.
+
+# version check for AC_PROG_CC_C99
+ac_version=`${AUTOCONF:-autoconf} --version 2>/dev/null|sed -e 's/^[^0-9]*//;s/[a-z]* *$//;q'`
+case "$ac_version" in
+# versions older than 2.50 are denied by AC_PREREQ
+2.5*)
+ echo WARNING: You are using an outdated version of autoconf.
+ echo WARNING: This may lead to less than optimal performance of httpd.
+ echo WARNING: You should use autoconf 2.60 or newer.
+ sleep 1
+ ;;
+esac
+
+# set a couple of defaults for where we should be looking for our support libs.
+# can be overridden with --with-apr=[dir] and --with-apr-util=[dir]
+
+apr_src_dir="srclib/apr ../apr"
+apu_src_dir=""
+
+while test $# -gt 0
+do
+ # Normalize
+ case "$1" in
+ -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) optarg= ;;
+ esac
+
+ case "$1" in
+ --with-apr=*)
+ apr_src_dir=$optarg
+ ;;
+ esac
+
+ case "$1" in
+ --with-apr-util=*)
+ apu_src_dir=$optarg
+ ;;
+ esac
+
+ shift
+done
+
+#
+# Check to be sure that we have the srclib dependencies checked-out
+#
+
+should_exit=0
+apr_found=0
+apu_found=0
+apr_major_version=2
+
+for dir in $apr_src_dir
+do
+ if [ -f "${dir}/build/apr_common.m4" ]; then
+ echo "found apr source: ${dir}"
+ apr_src_dir=$dir
+ apr_found=1
+ break
fi
+done
+
+if [ $apr_found -lt 1 ]; then
+ echo ""
+ echo "APR could not be found automatically."
+ echo ""
+ echo "Please refer to the documentation on APR in the httpd INSTALL file."
+ echo ""
+ should_exit=1
+else
+ apr_major_version=`grep "#define APR_MAJOR_VERSION" \
+ $apr_src_dir/include/apr_version.h | sed 's/[^0-9]//g'`
+fi
- # libtool 1.3.3 or newer
- lt_pversion=`libtool --version 2>/dev/null|sed -e 's/^[^0-9]*//' -e 's/[- ].*//'`
- if test "$lt_pversion" = ""; then
- echo "buildconf: libtool not found."
- echo " You need libtool version 1.3 or newer installed"
- echo " to build APACHE from CVS."
- exit 1
+if [ $apr_major_version -lt 2 ] ; then
+ if test -z "$apu_src_dir"; then
+ apu_src_dir=`echo $apr_src_dir | sed -e 's#/apr#/apr-util#g;'`
+ apu_src_dir="$apu_src_dir `echo $apr_src_dir | sed -e 's#/apr#/aprutil#;g'`"
+ apu_src_dir="$apu_src_dir srclib/apr-util ../apr-util"
fi
- lt_version=`echo $lt_pversion|sed -e 's/\([a-z]*\)$/.\1/'`
- IFS=.; set $lt_version; IFS=' '
- if test "$1" -gt "1" || test "$2" -gt "3" || test "$2" = "3" -a "$3" -ge "3"
- then
- echo "buildconf: libtool version $lt_pversion (ok)"
- else
- echo "buildconf: libtool version $lt_pversion found."
- echo " You need libtool version 1.3.3 or newer installed"
- echo " to build APACHE from CVS."
- exit 1
+
+ for dir in $apu_src_dir
+ do
+ if [ -f "${dir}/Makefile.in" ]; then
+ echo "found apr-util source: ${dir}"
+ apu_src_dir=$dir
+ apu_found=1
+ break
+ fi
+ done
+
+ if [ $apu_found -lt 1 ]; then
+ echo ""
+ echo "You are using APR 1.x but APR-util 1.x was not found."
+ echo ""
+ echo "Please refer to the documentation on APR in the httpd INSTALL file."
+ echo ""
+ should_exit=1
fi
- touch buildconf.stamp
fi
-am_prefix=`which automake | sed -e 's#/[^/]*/[^/]*$##'`
-lt_prefix=`which libtool | sed -e 's#/[^/]*/[^/]*$##'`
-if test "$am_prefix" != "$lt_prefix"; then
- echo "buildconf: WARNING: automake and libtool are installed in different"
- echo " directories. This may cause aclocal to fail."
- echo "buildconf: continuing anyway"
+if [ $should_exit -gt 0 ]; then
+ exit 1
fi
-if test "$supplied_flag" = "--copy"; then
- automake_flags=--copy
+# These are temporary until Roy finishes the other build changes
+#
+touch .deps
+rm -f aclocal.m4
+rm -f generated_lists
+
+# Remove autoconf 2.5x cache directories
+rm -rf autom4te*.cache
+
+case "`uname`" in
+*BSD/OS*)
+ ./build/bsd_makefile;;
+esac
+#
+# end temporary stuff
+
+apr_configure="$apr_src_dir/configure"
+if [ $apr_major_version -lt 2 ] ; then
+ aprutil_configure="$apu_src_dir/configure"
fi
+config_h_in="include/ap_config_auto.h.in"
-./helpers/build-acconfig-header
+cross_compile_warning="warning: AC_TRY_RUN called without default to allow cross compiling"
-mv aclocal.m4 aclocal.m4.old 2>/dev/null
-aclocal
-if test "$?" != "0" -a "$am_prefix" != "$lt_prefix"; then
- echo "buildconf: ERROR: aclocal failed, probably because automake and"
- echo " libtool are installed with different prefixes;"
- echo " automake is installed in $am_prefix, but libtool in $lt_prefix."
- echo " Please re-install automake and/or libtool with a common prefix"
- echo " and try again."
- exit 1
+if [ "$apr_src_dir" = "srclib/apr" ]; then
+ echo rebuilding $apr_configure
+ (cd srclib/apr && ./buildconf) || {
+ echo "./buildconf failed for apr"
+ exit 1
+ }
+ rm -f srclib/apr/apr.spec
fi
-if cmp aclocal.m4.old aclocal.m4 > /dev/null 2>&1; then
- echo "buildconf: keeping aclocal.m4"
- mv aclocal.m4.old aclocal.m4
-else
- echo "buildconf: created or modified aclocal.m4"
-fi
+apr_src_dir=`cd $apr_src_dir && pwd`
-autoheader
+if [ $apr_major_version -lt 2 ] ; then
+ if [ "$apu_src_dir" = "srclib/apr-util" ]; then
+ echo rebuilding $aprutil_configure
+ (cd srclib/apr-util && ./buildconf --with-apr=$apr_src_dir) || {
+ echo "./buildconf failed for apr-util"
+ exit 1
+ }
+ rm -f srclib/apr-util/apr-util.spec
+ fi
-# find all Makefile.ams
-files="Makefile `find ap lib main modules regex os -name Makefile.am | sed 's#\.am##' | tr '\n' ' '`"
+ apu_src_dir=`cd $apu_src_dir && pwd`
+fi
-# suppress stupid automake warning
-automake --add-missing --include-deps $automake_flags $files 2>&1 | grep -v \$APACHE_OUTPUT_FILES >&2
+echo copying build files
+cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \
+ $apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \
+ $apr_src_dir/build/find_apr.m4 build
+if [ $apr_major_version -lt 2 ] ; then
+ cp $apu_src_dir/build/find_apu.m4 build
+fi
+# Remove any libtool files so one can switch between libtool 1.3
+# and libtool 1.4 by simply rerunning the buildconf script.
+(cd build ; rm -f ltconfig ltmain.sh)
-mv configure configure.old 2>/dev/null
-autoconf
-if cmp configure.old configure > /dev/null 2>&1; then
- echo "buildconf: keeping configure"
- mv configure.old configure
-else
- echo "buildconf: created or modified configure"
+# Optionally copy libtool-1.3.x files
+if [ -f $apr_src_dir/build/ltconfig ]; then
+ cp $apr_src_dir/build/ltconfig build
fi
+if [ -f $apr_src_dir/build/ltmain.sh ]; then
+ cp $apr_src_dir/build/ltmain.sh build
+fi
+
+echo rebuilding $config_h_in
+rm -f $config_h_in
+${AUTOHEADER:-autoheader} 2>&1 | grep -v "$cross_compile_warning"
+
+echo rebuilding configure
+rm -f config.cache
+${AUTOCONF:-autoconf} 2>&1 | grep -v "$cross_compile_warning"
+
+# Remove autoconf 2.5x cache directories
+rm -rf autom4te*.cache
+
+if [ -f `which cut` ]; then
+ echo rebuilding rpm spec file
+ ( VMMN=`build/get-version.sh mmn include/ap_mmn.h MODULE_MAGIC_NUMBER`
+ EPOCH=`build/get-version.sh epoch include/ap_release.h AP_SERVER`
+ REVISION=`build/get-version.sh all include/ap_release.h AP_SERVER`
+ VERSION=`echo $REVISION | cut -d- -s -f1`
+ RELEASE=`echo $REVISION | cut -d- -s -f2`
+ if [ "x$VERSION" = "x" ]; then
+ VERSION=$REVISION
+ RELEASE=1
+ fi
+ cat ./build/rpm/httpd.spec.in | \
+ sed -e "s/APACHE_VERSION/$VERSION/" \
+ -e "s/APACHE_RELEASE/$RELEASE/" \
+ -e "s/APACHE_MMN/$VMMN/" \
+ -e "s/APACHE_EPOCH/$EPOCH/" \
+ > httpd.spec )
+fi
+
+# ensure that the ap_expr expression parser sources are never regenerated
+# when running make
+echo fixing timestamps for ap_expr sources
+cd server
+touch util_expr_parse.y util_expr_scan.l
+sleep 1
+touch util_expr_parse.c util_expr_parse.h util_expr_scan.c
+cd ..
+exit 0