#!/bin/sh
#
-# Copyright 1999-2004 The Apache Software Foundation
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# buildconf: Build the support scripts needed to compile from a
# checked-out version of the source code.
+# version check for AC_PROG_CC_C99
+ac_version=`${AUTOCONF:-autoconf} --version 2>/dev/null|sed -e 's/^[^0-9]*//;s/[a-z]* *$//;q'`
+case "$ac_version" in
+# versions older than 2.50 are denied by AC_PREREQ
+2.5*)
+ echo WARNING: You are using an outdated version of autoconf.
+ echo WARNING: This may lead to less than optimal performance of httpd.
+ echo WARNING: You should use autoconf 2.60 or newer.
+ sleep 1
+ ;;
+esac
+
# set a couple of defaults for where we should be looking for our support libs.
# can be overridden with --with-apr=[dir] and --with-apr-util=[dir]
-apr_src_dir=srclib/apr
-apu_src_dir=srclib/apr-util
+apr_src_dir="srclib/apr ../apr"
+apu_src_dir=""
while test $# -gt 0
do
#
should_exit=0
+apr_found=0
+apu_found=0
+apr_major_version=2
+
+for dir in $apr_src_dir
+do
+ if [ -f "${dir}/build/apr_common.m4" ]; then
+ echo "found apr source: ${dir}"
+ apr_src_dir=$dir
+ apr_found=1
+ break
+ fi
+done
-if [ ! -d "$apr_src_dir" -o ! -f "$apr_src_dir/build/apr_common.m4" ]; then
+if [ $apr_found -lt 1 ]; then
echo ""
- echo "You don't have a copy of the apr source in $apr_src_dir. "
- echo "Please get the source using the following instructions,"
- echo "or specify the location of the source with "
- echo "--with-apr=[path to apr] :"
+ echo "APR could not be found automatically."
echo ""
- echo " svn co http://svn.apache.org/repos/asf/apr/apr/trunk srclib/apr"
+ echo "Please refer to the documentation on APR in the httpd INSTALL file."
echo ""
should_exit=1
+else
+ apr_major_version=`grep "#define APR_MAJOR_VERSION" \
+ $apr_src_dir/include/apr_version.h | sed 's/[^0-9]//g'`
fi
-if [ ! -d "$apu_src_dir" -o ! -f "$apu_src_dir/Makefile.in" ]; then
- echo ""
- echo "You don't have a copy of the apr-util source in $apu_src_dir. "
- echo "Please get one the source using the following instructions, "
- echo "or specify the location of the source with "
- echo "--with-apr-util=[path to apr-util]:"
- echo ""
- echo " svn co http://svn.apache.org/repos/asf/apr/apr-util/trunk srclib/apr-util"
- echo ""
- should_exit=1
+
+if [ $apr_major_version -lt 2 ] ; then
+ if test -z "$apu_src_dir"; then
+ apu_src_dir=`echo $apr_src_dir | sed -e 's#/apr#/apr-util#g;'`
+ apu_src_dir="$apu_src_dir `echo $apr_src_dir | sed -e 's#/apr#/aprutil#;g'`"
+ apu_src_dir="$apu_src_dir srclib/apr-util ../apr-util"
+ fi
+
+ for dir in $apu_src_dir
+ do
+ if [ -f "${dir}/Makefile.in" ]; then
+ echo "found apr-util source: ${dir}"
+ apu_src_dir=$dir
+ apu_found=1
+ break
+ fi
+ done
+
+ if [ $apu_found -lt 1 ]; then
+ echo ""
+ echo "You are using APR 1.x but APR-util 1.x was not found."
+ echo ""
+ echo "Please refer to the documentation on APR in the httpd INSTALL file."
+ echo ""
+ should_exit=1
+ fi
fi
if [ $should_exit -gt 0 ]; then
touch .deps
rm -f aclocal.m4
rm -f generated_lists
-rm -f srclib/pcre/aclocal.m4
# Remove autoconf 2.5x cache directories
-rm -rf autom4te*.cache srclib/pcre/autom4te*.cache
+rm -rf autom4te*.cache
case "`uname`" in
*BSD/OS*)
# end temporary stuff
apr_configure="$apr_src_dir/configure"
-aprutil_configure="$apu_src_dir/configure"
-pcre_configure="srclib/pcre/configure"
+if [ $apr_major_version -lt 2 ] ; then
+ aprutil_configure="$apu_src_dir/configure"
+fi
config_h_in="include/ap_config_auto.h.in"
cross_compile_warning="warning: AC_TRY_RUN called without default to allow cross compiling"
-if [ -d srclib/apr ]; then
+if [ "$apr_src_dir" = "srclib/apr" ]; then
echo rebuilding $apr_configure
(cd srclib/apr && ./buildconf) || {
echo "./buildconf failed for apr"
exit 1
}
+ rm -f srclib/apr/apr.spec
fi
-if [ -d srclib/apr-util ]; then
- echo rebuilding $aprutil_configure
- (cd srclib/apr-util && ./buildconf) || {
- echo "./buildconf failed for apr-util"
- exit 1
- }
+apr_src_dir=`cd $apr_src_dir && pwd`
+
+if [ $apr_major_version -lt 2 ] ; then
+ if [ "$apu_src_dir" = "srclib/apr-util" ]; then
+ echo rebuilding $aprutil_configure
+ (cd srclib/apr-util && ./buildconf --with-apr=$apr_src_dir) || {
+ echo "./buildconf failed for apr-util"
+ exit 1
+ }
+ rm -f srclib/apr-util/apr-util.spec
+ fi
+
+ apu_src_dir=`cd $apu_src_dir && pwd`
fi
echo copying build files
cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \
$apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \
- $apr_src_dir/build/find_apr.m4 $apu_src_dir/build/find_apu.m4 build
+ $apr_src_dir/build/find_apr.m4 build
+if [ $apr_major_version -lt 2 ] ; then
+ cp $apu_src_dir/build/find_apu.m4 build
+fi
# Remove any libtool files so one can switch between libtool 1.3
# and libtool 1.4 by simply rerunning the buildconf script.
cp $apr_src_dir/build/ltmain.sh build
fi
-echo rebuilding $pcre_configure
-(cd srclib/pcre && ${ACLOCAL:-aclocal} && ${AUTOCONF:-autoconf})
-
echo rebuilding $config_h_in
rm -f $config_h_in
${AUTOHEADER:-autoheader} 2>&1 | grep -v "$cross_compile_warning"
${AUTOCONF:-autoconf} 2>&1 | grep -v "$cross_compile_warning"
# Remove autoconf 2.5x cache directories
-rm -rf autom4te*.cache srclib/pcre/autom4te*.cache
+rm -rf autom4te*.cache
if [ -f `which cut` ]; then
echo rebuilding rpm spec file
( VMMN=`build/get-version.sh mmn include/ap_mmn.h MODULE_MAGIC_NUMBER`
+ EPOCH=`build/get-version.sh epoch include/ap_release.h AP_SERVER`
REVISION=`build/get-version.sh all include/ap_release.h AP_SERVER`
VERSION=`echo $REVISION | cut -d- -s -f1`
RELEASE=`echo $REVISION | cut -d- -s -f2`
sed -e "s/APACHE_VERSION/$VERSION/" \
-e "s/APACHE_RELEASE/$RELEASE/" \
-e "s/APACHE_MMN/$VMMN/" \
+ -e "s/APACHE_EPOCH/$EPOCH/" \
> httpd.spec )
fi
-# ensure that the mod_ssl expression parser sources are never regenerated
+# ensure that the ap_expr expression parser sources are never regenerated
# when running make
-echo fixing timestamps for mod_ssl sources
-cd modules/ssl
-touch ssl_expr_parse.y
-sleep 1
-touch ssl_expr_parse.c ssl_expr_parse.h ssl_expr_scan.l
+echo fixing timestamps for ap_expr sources
+cd server
+touch util_expr_parse.y util_expr_scan.l
sleep 1
-touch ssl_expr_scan.c
-cd ../..
+touch util_expr_parse.c util_expr_parse.h util_expr_scan.c
+cd ..
exit 0