#!/bin/sh
-# ====================================================================
-# The Apache Software License, Version 1.1
#
-# Copyright (c) 2000-2002 The Apache Software Foundation. All rights
-# reserved.
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
+# http://www.apache.org/licenses/LICENSE-2.0
#
-# 1. Redistributions of source code must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
#
-# 2. Redistributions in binary form must reproduce the above copyright
-# notice, this list of conditions and the following disclaimer in
-# the documentation and/or other materials provided with the
-# distribution.
#
-# 3. The end-user documentation included with the redistribution,
-# if any, must include the following acknowledgment:
-# "This product includes software developed by the
-# Apache Software Foundation (http://www.apache.org/)."
-# Alternately, this acknowledgment may appear in the software itself,
-# if and wherever such third-party acknowledgments normally appear.
-#
-# 4. The names "Apache" and "Apache Software Foundation" must
-# not be used to endorse or promote products derived from this
-# software without prior written permission. For written
-# permission, please contact apache@apache.org.
-#
-# 5. Products derived from this software may not be called "Apache",
-# nor may "Apache" appear in their name, without prior written
-# permission of the Apache Software Foundation.
-#
-# THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESSED OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE APACHE SOFTWARE FOUNDATION OR
-# ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
-# USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
-# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-# ====================================================================
-#
-# This software consists of voluntary contributions made by many
-# individuals on behalf of the Apache Software Foundation. For more
-# information on the Apache Software Foundation, please see
-# <http://www.apache.org/>.
-#
-
# buildconf: Build the support scripts needed to compile from a
# checked-out version of the source code.
+# version check for AC_PROG_CC_C99
+ac_version=`${AUTOCONF:-autoconf} --version 2>/dev/null|sed -e 's/^[^0-9]*//;s/[a-z]* *$//;q'`
+case "$ac_version" in
+# versions older than 2.50 are denied by AC_PREREQ
+2.5*)
+ echo WARNING: You are using an outdated version of autoconf.
+ echo WARNING: This may lead to less than optimal performance of httpd.
+ echo WARNING: You should use autoconf 2.60 or newer.
+ sleep 1
+ ;;
+esac
+
+# set a couple of defaults for where we should be looking for our support libs.
+# can be overridden with --with-apr=[dir] and --with-apr-util=[dir]
+
+apr_src_dir="srclib/apr ../apr"
+apu_src_dir=""
+
+while test $# -gt 0
+do
+ # Normalize
+ case "$1" in
+ -*=*) optarg=`echo "$1" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) optarg= ;;
+ esac
+
+ case "$1" in
+ --with-apr=*)
+ apr_src_dir=$optarg
+ ;;
+
+ --with-apr-util=*)
+ apu_src_dir=$optarg
+ ;;
+
+ -h|--help)
+ cat <<EOF
+buildconf: generates the files needed to configure httpd.
+
+Usage: $0 [OPTION]...
+
+Configuration:
+ -h, --help display this help and exit
+
+ --with-apr=SRCDIR define a space-separated list of directories to
+ search for the APR source code. If, instead of a
+ directory, an apr-config executable name is passed,
+ APR-Config Mode is enabled (see below). Defaults to
+ "srclib/apr ../apr"
+ --with-apr-util=SRCDIR define a space-separated list of directories to
+ search for the APR-util source code. Defaults to the
+ same location as the --with-apr SRCDIR, but with
+ "apr" replaced with "apr-util" or "aprutil". Ignored
+ in APR-Config Mode.
+
+APR-Config Mode:
+
+ When passing an apr-config executable to --with-apr, buildconf will attempt to
+ copy build scripts from various installed locations on your system instead of
+ an APR source tree. This allows you to configure httpd from source without
+ also requiring you to download the APR and/or APR-util sources.
+
+ For example:
+
+ ./buildconf --with-apr=apr-1-config
+
+ For this functionality to work reliably, you must have automake >= 1.12 and be
+ using a distribution that includes both find_apr.m4 and find_apu.m4 in the
+ --installbuilddir pointed to by apr-config.
+
+Environment variables used by buildconf:
+ AUTOCONF autoconf executable name [autoconf]
+ AUTOMAKE automake executable name [automake]
+ AUTOHEADER autoheader executable name [autoheader]
+EOF
+ exit
+ ;;
+
+ *)
+ echo "unknown option $1 (try --help for usage)"
+ exit 1
+ ;;
+ esac
+
+ shift
+done
+
#
-# Check to be sure that we have the srclib dependencies checked-out
+# Check to be sure that we have the srclib dependencies checked-out, or that a
+# working apr-config installation has been specified.
#
-if [ ! -d srclib/apr -o ! -f srclib/apr/build/apr_common.m4 ]; then
+
+should_exit=0
+apr_config= # path to apr-config (empty if using a source directory)
+apr_found=0
+apu_found=0
+apr_major_version=2
+
+for dir in $apr_src_dir
+do
+ if [ -f "${dir}/build/apr_common.m4" ]; then
+ echo "found apr source: ${dir}"
+ apr_src_dir=$dir
+ apr_found=1
+ break
+ elif which "${dir}" >/dev/null 2>&1; then
+ # We're using apr-config. Do a sanity check.
+ apr_config=`which "${dir}"`
+ echo "testing apr-config executable: ${apr_config}"
+
+ version=`"${apr_config}" --version`
+ version=`echo "${version}" | sed -n '/^[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*$/p'`
+
+ if [ -z "${version}" ]; then
+ echo "apr-config gave us an invalid --version"
+ apr_config=
+ continue
+ fi
+
+ echo "using apr-config version ${version}"
+ apr_major_version=${version} # we'll make a real "major version" later
+ apr_src_dir=`"${apr_config}" --installbuilddir`
+ apr_found=1
+ break
+ fi
+done
+
+if [ $apr_found -lt 1 ]; then
echo ""
- echo "You don't have a srclib/apr/ subdirectory. Please get one:"
+ echo "You don't have a copy of the apr source in srclib/apr. "
+ echo "Please get the source using the following instructions,"
+ echo "or specify the location of the source with "
+ echo "--with-apr=[path to apr] :"
echo ""
- echo " cd srclib"
- echo " cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic login"
- echo " (password 'anoncvs')"
- echo " cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic co apr"
+ echo " svn co http://svn.apache.org/repos/asf/apr/apr/trunk srclib/apr"
echo ""
- exit 1
+ should_exit=1
+elif [ -n "${apr_config}" ]; then
+ apr_major_version=`echo "${apr_major_version}" | sed 's/\..*//'`
+else
+ apr_major_version=`grep "#define APR_MAJOR_VERSION" \
+ $apr_src_dir/include/apr_version.h | sed 's/[^0-9]//g'`
fi
-if [ ! -d srclib/apr-util -o ! -f srclib/apr-util/Makefile.in ]; then
- echo ""
- echo "You don't have a srclib/apr-util/ subdirectory. Please get one:"
- echo ""
- echo " cd srclib"
- echo " cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic login"
- echo " (password 'anoncvs')"
- echo " cvs -d :pserver:anoncvs@cvs.apache.org:/home/cvspublic co apr-util"
- echo ""
+
+# Find APR-util. Note: if we're using apr-config, we can completely skip this,
+# even if APR is version 1. That's because we only end up caring about
+# find_apu.m4, which is not actually installed in the standard APR-util
+# distribution to begin with.
+if [ -z "${apr_config}" -a $apr_major_version -lt 2 ] ; then
+ if test -z "$apu_src_dir"; then
+ apu_src_dir=`echo $apr_src_dir | sed -e 's#/apr#/apr-util#g;'`
+ apu_src_dir="$apu_src_dir `echo $apr_src_dir | sed -e 's#/apr#/aprutil#;g'`"
+ apu_src_dir="$apu_src_dir srclib/apr-util ../apr-util"
+ fi
+
+ for dir in $apu_src_dir
+ do
+ if [ -f "${dir}/Makefile.in" ]; then
+ echo "found apr-util source: ${dir}"
+ apu_src_dir=$dir
+ apu_found=1
+ break
+ fi
+ done
+
+ if [ $apu_found -lt 1 ]; then
+ echo ""
+ echo "You don't have a copy of the apr-util source in srclib/apr-util. "
+ echo "Please get one the source using the following instructions, "
+ echo "or specify the location of the source with "
+ echo "--with-apr-util=[path to apr-util]:"
+ echo ""
+ echo " svn co http://svn.apache.org/repos/asf/apr/apr-util/branches/1.5.x srclib/apr-util"
+ echo ""
+ should_exit=1
+ fi
+fi
+
+if [ $should_exit -gt 0 ]; then
exit 1
fi
rm -f aclocal.m4
rm -f generated_lists
-# Remove autoconf 2.5x's cache directory
+# Remove autoconf 2.5x cache directories
rm -rf autom4te*.cache
case "`uname`" in
#
# end temporary stuff
-apr_configure="srclib/apr/configure"
-aprutil_configure="srclib/apr-util/configure"
-pcre_configure="srclib/pcre/configure"
+apr_configure="$apr_src_dir/configure"
+if [ $apr_major_version -lt 2 ] ; then
+ aprutil_configure="$apu_src_dir/configure"
+fi
config_h_in="include/ap_config_auto.h.in"
cross_compile_warning="warning: AC_TRY_RUN called without default to allow cross compiling"
-echo rebuilding $apr_configure
-(cd srclib/apr && ./buildconf) || {
- echo "./buildconf failed for apr"
- exit 1
-}
+if [ "$apr_src_dir" = "srclib/apr" ]; then
+ echo rebuilding $apr_configure
+ (cd srclib/apr && ./buildconf) || {
+ echo "./buildconf failed for apr"
+ exit 1
+ }
+ rm -f srclib/apr/apr.spec
+fi
-echo rebuilding $aprutil_configure
-(cd srclib/apr-util && ./buildconf) || {
- echo "./buildconf failed for apr-util"
- exit 1
-}
+apr_src_dir=`cd $apr_src_dir && pwd`
-echo rebuilding $pcre_configure
-(cd srclib/pcre && ${AUTOCONF:-autoconf})
+if [ $apr_major_version -lt 2 ] ; then
+ if [ "$apu_src_dir" = "srclib/apr-util" ]; then
+ echo rebuilding $aprutil_configure
+ (cd srclib/apr-util && ./buildconf --with-apr=$apr_src_dir) || {
+ echo "./buildconf failed for apr-util"
+ exit 1
+ }
+ rm -f srclib/apr-util/apr-util.spec
+ fi
+
+ apu_src_dir=`cd $apu_src_dir && pwd`
+fi
+
+echo copying build files
+if [ -n "${apr_config}" ]; then
+ # If we're using apr-config, we switch things up a little bit:
+ # - use automake's config.* scripts instead of APR's
+ # - use the included PrintPath instead of copying from APR
+ # - assume find_apu.m4 is also in APR's --installbuilddir
+
+ # Figure out where to copy config.* from.
+ automake=${AUTOMAKE:-automake}
+ am_libdir=`"${automake}" --print-libdir`
+ cp "${am_libdir}/config.guess" "${am_libdir}/config.sub" build
+
+ # Remember that in this case, $apr_src_dir points to the build directory.
+ cp "$apr_src_dir/apr_common.m4" "$apr_src_dir/find_apr.m4" build
+ if [ $apr_major_version -lt 2 ] ; then
+ cp "$apr_src_dir/find_apu.m4" build
+ fi
+else
+ cp $apr_src_dir/build/config.guess $apr_src_dir/build/config.sub \
+ $apr_src_dir/build/PrintPath $apr_src_dir/build/apr_common.m4 \
+ $apr_src_dir/build/find_apr.m4 build
+ if [ $apr_major_version -lt 2 ] ; then
+ cp $apu_src_dir/build/find_apu.m4 build
+ fi
+fi
+
+# Remove any libtool files so one can switch between libtool 1.3
+# and libtool 1.4 by simply rerunning the buildconf script.
+(cd build ; rm -f ltconfig ltmain.sh)
+
+if [ -z "${apr_config}" ]; then
+ # Optionally copy libtool-1.3.x files
+ if [ -f $apr_src_dir/build/ltconfig ]; then
+ cp $apr_src_dir/build/ltconfig build
+ fi
+ if [ -f $apr_src_dir/build/ltmain.sh ]; then
+ cp $apr_src_dir/build/ltmain.sh build
+ fi
+fi
echo rebuilding $config_h_in
rm -f $config_h_in
rm -f config.cache
${AUTOCONF:-autoconf} 2>&1 | grep -v "$cross_compile_warning"
+# Remove autoconf 2.5x cache directories
+rm -rf autom4te*.cache
+
+if [ -f `which cut` ]; then
+ echo rebuilding rpm spec file
+ ( VMMN=`build/get-version.sh mmn include/ap_mmn.h MODULE_MAGIC_NUMBER`
+ EPOCH=`build/get-version.sh epoch include/ap_release.h AP_SERVER`
+ REVISION=`build/get-version.sh all include/ap_release.h AP_SERVER`
+ VERSION=`echo $REVISION | cut -d- -s -f1`
+ RELEASE=`echo $REVISION | cut -d- -s -f2`
+ if [ "x$VERSION" = "x" ]; then
+ VERSION=$REVISION
+ RELEASE=1
+ fi
+ cat ./build/rpm/httpd.spec.in | \
+ sed -e "s/APACHE_VERSION/$VERSION/" \
+ -e "s/APACHE_RELEASE/$RELEASE/" \
+ -e "s/APACHE_MMN/$VMMN/" \
+ -e "s/APACHE_EPOCH/$EPOCH/" \
+ > httpd.spec )
+fi
+
+# ensure that the ap_expr expression parser sources are never regenerated
+# when running make
+echo fixing timestamps for ap_expr sources
+cd server
+touch util_expr_parse.y util_expr_scan.l
+sleep 1
+touch util_expr_parse.c util_expr_parse.h util_expr_scan.c
+cd ..
+
exit 0
projects / apache / blobdiff