#!/bin/sh
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License. You may obtain a copy of the License at
#
-# binbuild.sh - Builds an Apache binary distribution.
-# Initially written by Lars Eilebrecht <lars@apache.org>.
+# http://www.apache.org/licenses/LICENSE-2.0
#
-# This script falls under the Apache License.
-# See http://www.apache.org/docs/LICENSE
-
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+#
+# binbuild.sh - Builds an Apache binary distribution.
+# Initially written by Lars Eilebrecht <lars apache.org>.
-APDIR=`pwd`
+OS=`./build/config.guess`
+PRINTPATH="build/PrintPath"
+APFULLDIR=`pwd`
+BUILD_DIR="$APFULLDIR/bindist"
+DEFAULT_DIR="/usr/local/apache2"
+APDIR="$APFULLDIR"
APDIR=`basename $APDIR`
-VER=`echo $APDIR |sed s/apache_//`
-OS=`src/helpers/GuessOS`
-USER="`src/helpers/buildinfo.sh -n %u@%h%d`"
-TAR="`src/helpers/PrintPath tar`"
-GTAR="`src/helpers/PrintPath gtar`"
-GZIP="`src/helpers/PrintPath gzip`"
-CONFIGPARAM="--with-layout=BinaryDistribution --enable-module=most --enable-shared=max"
-
-if [ ! -f ./ABOUT_APACHE ]
-then
+CONFIGPARAM="--enable-layout=Apache --prefix=$BUILD_DIR --enable-mods-shared=most --with-expat=$APFULLDIR/srclib/apr-util/xml/expat --enable-static-support"
+VER=`echo $APDIR | sed s/httpd-//`
+TAR="`$PRINTPATH tar`"
+GZIP="`$PRINTPATH gzip`"
+COMPRESS="`$PRINTPATH compress`"
+MD5="`$PRINTPATH md5`"
+if [ x$MD5 = x ]; then
+ OPENSSL="`$PRINTPATH openssl`"
+ if [ x$OPENSSL != x ]; then
+ MD5="$OPENSSL md5"
+ fi
+fi
+
+if [ x$1 != x ]; then
+ USER=$1
+else
+ USER="`build/buildinfo.sh -n %u@%h%d`"
+fi
+
+if [ ! -f ./ABOUT_APACHE ]; then
echo "ERROR: The current directory contains no valid Apache distribution."
echo "Please change the directory to the top level directory of a freshly"
- echo "unpacked Apache 1.3 source distribution and re-execute the script"
- echo "'./src/helpers/bindbuild.sh'."
+ echo "unpacked Apache 2.0 source distribution and re-execute the script"
+ echo "'./build/binbuild.sh'."
exit 1;
fi
-if [ -d ./CVS ]
-then
+if [ -d ./CVS ]; then
echo "ERROR: The current directory is a CVS checkout of Apache."
- echo "Only a standard Apache 1.3 source distribution should be used to"
+ echo "Only a standard Apache 2.0 source distribution should be used to"
echo "create a binary distribution."
exit 1;
fi
echo "----------------------------------------------------------------------" && \
make && \
echo "----------------------------------------------------------------------" && \
- make install-quiet root="bindist/" && \
+ make install root="bindist/" && \
echo "----------------------------------------------------------------------" && \
make clean && \
echo "----------------------------------------------------------------------" && \
echo "[EOF]" \
-) > build.log 2>&1
+) 2>&1 | tee build.log
-if [ ! -f ./bindist/bin/httpd ]
-then
+if [ ! -f ./bindist/bin/httpd ]; then
echo "ERROR: Failed to build Apache. See \"build.log\" for details."
exit 1;
fi
-echo "Binary images successfully created..."
+echo "Binary image successfully created..."
+
+./bindist/bin/httpd -v
+
echo "Creating supplementary files..."
( echo " " && \
echo " " && \
echo "NOTE: Please do not send support-related mails to the address mentioned" && \
echo " above or to any member of the Apache Group! Support questions" && \
- echo " should be directed to the \"comp.infosystems.www.servers.unix\"" && \
- echo " or \"comp.infosystems.www.servers.ms-windows\" newsgroup" && \
- echo " (as appropriate for the platform you use), where some of the" && \
- echo " Apache team lurk, in the company of many other Apache gurus" && \
- echo " who should be able to help." && \
+ echo " should be directed to the forums mentioned at" && \
+ echo " http://httpd.apache.org/lists.html#http-users" && \
+ echo " where some of the Apache team lurk, in the company of many other" && \
+ echo " Apache gurus who should be able to help." && \
echo " If you think you found a bug in Apache or have a suggestion please" && \
- echo " visit the bug report page at http://www.apache.org/bug_report.html" && \
+ echo " visit the bug report page at http://httpd.apache.org/bug_report.html" && \
echo " " && \
echo "----------------------------------------------------------------------" && \
./bindist/bin/httpd -V && \
echo "----------------------------------------------------------------------" \
) > README.bindist
-cp README.bindist ../apache_$VER-$OS.README
+cp README.bindist ../httpd-$VER-$OS.README
( echo " " && \
echo "Apache $VER binary installation" && \
echo "script \"install-bindist.sh\" in the top-level directory of the distribution." && \
echo " " && \
echo "The script takes the ServerRoot directory into which you want to install" && \
- echo "Apache as an option. If you ommit the option the default path" && \
- echo "\"/usr/local/apache\" is used." && \
+ echo "Apache as an option. If you omit the option the default path" && \
+ echo "\"$DEFAULT_DIR\" is used." && \
echo "Make sure you have write permissions in the target directory, e.g. switch" && \
echo "to user \"root\" before you execute the script." && \
echo " " && \
echo " " \
) > INSTALL.bindist
-( echo "#!/bin/sh" && \
- echo "#" && \
- echo "# Usage: install-bindist.sh [ServerRoot]" && \
- echo "# This script installs the Apache binary distribution and" && \
- echo "# was automatically created by binbuild.sh." && \
- echo " " && \
- echo "if [ .\$1 = . ]" && \
- echo "then" && \
- echo " SR=/usr/local/apache" && \
- echo "else" && \
- echo " SR=\$1" && \
- echo "fi" && \
- echo "echo \"Installing binary distribution for platform $OS\"" && \
- echo "echo \"into directory \$SR ...\"" && \
- echo "./src/helpers/mkdir.sh \$SR" && \
- echo "cp -r bindist/proxy \$SR/proxy" && \
- echo "cp -r bindist/man \$SR/man" && \
- echo "cp -r bindist/logs \$SR/logs" && \
- echo "cp -r bindist/libexec \$SR/libexec" && \
- echo "cp -r bindist/include \$SR/include" && \
- echo "cp -r bindist/icons \$SR/icons" && \
- echo "cp -r bindist/cgi-bin \$SR/cgi-bin" && \
- echo "cp -r bindist/bin \$SR/bin" && \
- echo "if [ -d \$SR/conf ]" && \
- echo "then" && \
- echo " echo \"[Preserving existing configuration files.]\"" && \
- echo " cp -r bindist/conf/*.default \$SR/conf/" && \
- echo "else" && \
- echo " cp -r bindist/conf \$SR/conf" && \
- echo "fi" && \
- echo "if [ -d \$SR/htdocs ]" && \
- echo "then" && \
- echo " echo \"[Preserving existing htdocs directory.]\"" && \
- echo "else" && \
- echo " cp -r bindist/htdocs \$SR/htdocs" && \
- echo "fi" && \
- echo "sed -e s%/usr/local/apache%\$SR/% \$SR/conf/httpd.conf.default > \$SR/conf/httpd.conf" && \
- echo "sed -e s%PIDFILE=%PIDFILE=\$SR/% -e s%HTTPD=%HTTPD=\\\"\$SR/% -e \"s%/httpd$%/httpd -d \$SR\\\"%\" bindist/bin/apachectl > \$SR/bin/apachectl" && \
- echo " " && \
- echo "echo \"Ready.\"" && \
- echo "echo \" +--------------------------------------------------------+\"" && \
- echo "echo \" | You now have successfully installed the Apache $VER |\"" && \
- echo "echo \" | HTTP server. To verify that Apache actually works |\"" && \
- echo "echo \" | correctly you now should first check the (initially |\"" && \
- echo "echo \" | created or preserved) configuration files |\"" && \
- echo "echo \" | |\"" && \
- echo "echo \" | \$SR/conf/httpd.conf\"" && \
- echo "echo \" | |\"" && \
- echo "echo \" | and then you should be able to immediately fire up |\"" && \
- echo "echo \" | Apache the first time by running: |\"" && \
- echo "echo \" | |\"" && \
- echo "echo \" | \$SR/bin/apachectl start \"" &&\
- echo "echo \" | |\"" && \
- echo "echo \" | Thanks for using Apache. The Apache Group |\"" && \
- echo "echo \" | http://www.apache.org/ |\"" && \
- echo "echo \" +--------------------------------------------------------+\"" && \
- echo "echo \" \"" \
-) > install-bindist.sh
+sed -e "s%\@default_dir\@%$DEFAULT_DIR%" \
+ -e "s%\@ver\@%$VER%" \
+ -e "s%\@os\@%$OS%" \
+ build/install-bindist.sh.in > install-bindist.sh
+
chmod 755 install-bindist.sh
-sed -e "s%\"/htdocs%\"/usr/local/apache/htdocs%" \
- -e "s%\"/icons%\"/usr/local/apache/icons%" \
- -e "s%\"/cgi-bin%\"/usr/local/apache/cgi-bin%" \
+sed -e "s%$BUILD_DIR%$DEFAULT_DIR%" \
-e "s%^ServerAdmin.*%ServerAdmin you@your.address%" \
-e "s%#ServerName.*%#ServerName localhost%" \
- -e "s%Port 8080%Port 80%" \
- bindist/conf/httpd.conf.default > bindist/conf/httpd.conf
-cp bindist/conf/httpd.conf bindist/conf/httpd.conf.default
+ bindist/conf/httpd-std.conf > bindist/conf/httpd.conf
+cp bindist/conf/httpd.conf bindist/conf/httpd-std.conf
+
+for one_file in apachectl envvars envvars-std; do
+ sed -e "s%$BUILD_DIR%$DEFAULT_DIR%" \
+ bindist/bin/$one_file > bindist/bin/$one_file.tmp
+ mv bindist/bin/$one_file.tmp bindist/bin/$one_file
+done
echo "Creating distribution archive and readme file..."
-if [ ".`grep -i error build.log > /dev/null`" != . ]
-then
+if [ ".`grep -i error build.log > /dev/null`" != . ]; then
echo "ERROR: Failed to build Apache. See \"build.log\" for details."
exit 1;
else
- if [ "x$GTAR" != "x" ]
- then
- $GTAR -zcf ../apache_$VER-$OS.tar.gz -C .. --owner=root --group=root apache_$VER
- else
- if [ "x$TAR" != "x" ]
- then
- $TAR -cf ../apache_$VER-$OS.tar -C .. apache_$VER
- if [ "x$GZIP" != "x" ]
- then
- $GZIP ../apache_$VER-$OS.tar
- fi
+ if [ "x$TAR" != "x" ]; then
+ case "x$OS" in
+ x*os390*) $TAR -cfU ../httpd-$VER-$OS.tar -C .. httpd-$VER;;
+ *) (cd .. && $TAR -cf httpd-$VER-$OS.tar httpd-$VER);;
+ esac
+ if [ "x$GZIP" != "x" ]; then
+ $GZIP -9 ../httpd-$VER-$OS.tar
+ ARCHIVE=../httpd-$VER-$OS.tar.gz
+ elif [ "x$COMPRESS" != "x" ]; then
+ $COMPRESS ../httpd-$VER-$OS.tar
+ ARCHIVE=../httpd-$VER-$OS.tar.Z
else
- echo "ERROR: Could not find a 'tar' program!"
- echo " Please execute the following commands manually:"
- echo " tar -cf ../apache_$VER-$OS.tar ."
- echo " gzip ../apache_$VER-$OS.tar"
+ echo "WARNING: Could not find a 'gzip' program!"
+ echo " tar archive is not compressed."
+ ARCHIVE=../httpd-$VER-$OS.tar
fi
+ else
+ echo "ERROR: Could not find a 'tar' program!"
+ echo " Please execute the following commands manually:"
+ echo " tar -cf ../httpd-$VER-$OS.tar ."
+ echo " gzip -9 ../httpd-$VER-$OS.tar"
+ fi
+
+ if [ "x$MD5" != "x" ]; then
+ $MD5 $ARCHIVE > $ARCHIVE.md5
fi
- if [ -f ../apache_$VER-$OS.tar.gz ] && [ -f ../apache_$VER-$OS.README ]
- then
+ if [ -f $ARCHIVE ] && [ -f ../httpd-$VER-$OS.README ]; then
echo "Ready."
- echo "You can find the binary archive (apache_$VER-$OS.tar.gz)"
- echo "and the readme file (apache_$VER-$OS.README) in the"
+ echo "You can find the binary archive ($ARCHIVE)"
+ echo "and the readme file (httpd-$VER-$OS.README) in the"
echo "parent directory."
exit 0;
else
+ echo "ERROR: Archive or README is missing."
exit 1;
fi
fi
projects / apache / blobdiff