@echo XXX - by hand, with the options you want.
./configure
+_pam_aconf.h: Make.Rules
+
configure: configure.in
- @$(MAKE) distclean
@echo
- @echo You do not appear to have a ./configure file.
+ @echo You do not appear to have an up-to-date ./configure file.
@echo Please run autoconf, and then ./configure [..options..]
@echo
+ @rm -f configure
@exit 1
$(THINGSTOMAKE): _pam_aconf.h prep
install: _pam_aconf.h prep
$(MKDIR) $(FAKEROOT)$(INCLUDED)
$(INSTALL) -m 444 security/_pam_aconf.h $(FAKEROOT)$(INCLUDED)
- for x in $(THINGSTOMAKE) ; do make -C $$x install ; done
+ for x in $(THINGSTOMAKE) ; do $(MAKE) -C $$x install ; done
remove:
rm -f $(FAKEROOT)$(INCLUDED)/_pam_aconf.h
- for x in $(THINGSTOMAKE) ; do make -C $$x remove ; done
+ for x in $(THINGSTOMAKE) ; do $(MAKE) -C $$x remove ; done
release:
- @if [ ! -f Make.Rules ]; then echo make Make.Rules first ; exit 1; fi
+ @if [ ! -f Make.Rules ]; then echo $(MAKE) Make.Rules first ;exit 1 ;fi
@if [ ! -L ../$(DISTNAME)-$(MAJOR_REL).$(MINOR_REL) ]; then \
echo generating ../$(DISTNAME)-$(MAJOR_REL).$(MINOR_REL) link ; \
ln -sf $(DISTNAME) ../$(DISTNAME)-$(MAJOR_REL).$(MINOR_REL) ; \
echo to ../$(DISTNAME) . ; fi
@diff ../$(DISTNAME)-$(MAJOR_REL).$(MINOR_REL)/Make.Rules Make.Rules
- make distclean
- cd .. ; tar zvfc $(DISTNAME)-$(MAJOR_REL).$(MINOR_REL).tar.gz --exclude CVS --exclude .cvsignore --exclude '.#*' $(DISTNAME)-$(MAJOR_REL).$(MINOR_REL)/*
-
-## =================
-
-ifdef LEGACY_OLD_MAKEFILE
-
-# major and minor numbers of this release
-MAJOR_REL=0
-MINOR_REL=72
-DEBUG_REL=no
-#DEBUG_REL=yes
-
-# this should be the name of this directory (under CVS)
-DISTNAME = Linux-PAM
-# this should be the name of this directory (when generating the release)
-RELNAME = $(DISTNAME)-$(MAJOR_REL).$(MINOR_REL)
-
-# this is the name of the archive file
-DISTFILE = $(RELNAME).tar.gz
-
-# define this to indicate to subdirectories that they are part of the
-# full source tree.
-FULL_LINUX_PAM_SOURCE_TREE=yes
-export FULL_LINUX_PAM_SOURCE_TREE
-
-DYNLOAD="dl"
-DYNTYPE="so"
-
-# Comment out either line to disable that type of linking for *modules only*
-# Both at once is a legal configuration!
-DYNAMIC=-DPAM_DYNAMIC
-#STATIC=-DPAM_STATIC
-
-# Comment out these lines to disable building dynamic/static libpam.*
-DYNAMIC_LIBPAM=yes
-#STATIC_LIBPAM=yes
-
-# All combinations of the above four variable definitions are legal,
-# however, not defining either dynamic or static modules and yet
-# creating a some flavor of LIBPAM will make an authentication library
-# that always fails!
-
-# Here we indicate which libraries are present on the local system
-# they control the building of some modules in this distribution
-# Note, these definitions are all "export"ed below...
-
-HAVE_PWDBLIB=yes
-HAVE_CRACKLIB=yes
-HAVE_AFSLIBS=no
-HAVE_KRBLIBS=no
-
-# NB. The following is the generic defines for compilation.
-# They can be overridden in the default.defs file below
-#
-WARNINGS = -ansi -D_POSIX_SOURCE -Wall -Wwrite-strings \
- -Wpointer-arith -Wcast-qual -Wcast-align \
- -Wtraditional -Wstrict-prototypes -Wmissing-prototypes \
- -Wnested-externs -Winline -Wshadow -pedantic
-PIC=-fPIC
-
-# Mode to install shared libraries with
-SHLIBMODE=755
-
-#
-# Conditional defines..
-#
-
-ifdef DYNAMIC
-# need the dynamic library functions
-LIBDL=-l$(DYNLOAD)
-ifdef STATIC_LIBPAM
-# needed because pam_xxx() fn's are now in statically linked library
-RDYNAMIC = -rdynamic
-endif
-endif
-
-# Here we include the defines for the preferred operating system
-# these include things like CC, CFLAGS and destination directories
-# etc.. By default, this is a symbolic link to one of the .defs files
-# the .../defs/ directory. Please take a moment to check that you are
-# using the correct one.
-
-include default.defs
-
-# to turn on the fprintf(stderr, ..) debugging lines throughout the
-# distribution uncomment this line
-#EXTRAS += -DDEBUG
-
-# For serious memory allocation tracing uncomment the following
-#MEMORY_DEBUG=-DMEMORY_DEBUG
-
-#######################################################################
-# The pam_unix module in this file will not work on NIS based systems.#
-#######################################################################
-
-# ////////////////////////////////////////////////////
-# // You should not modify anything below this line //
-# ////////////////////////////////////////////////////
-
-# the sub-directories to make things in
-
-DIRS = modules libpam conf libpam_misc libpamc examples
-
-#
-# basic defines
-#
-
-INCLUDEDIR=-I$(shell pwd)/include
-PAMLIB=-L$(shell pwd)/libpam
-PAMMISCLIB=-L$(shell pwd)/libpam_misc
-ifeq ($(DEBUG_REL),yes)
- PAMLIB += -lpamd
- PAMMISCLIB += -lpamd_misc
-else
- PAMLIB += -lpam
- PAMMISCLIB += -lpam_misc
-endif
-
-
-# This is Linux-PAM and not a version from Sun etc..
-# [Note, this does not describe the operating system you are using
-# only that you are compiling the "Linux" (read FREE) implementation
-# of Pluggable Authentication Modules.
-EXTRAS += -DLINUX_PAM
-
-#
-# build composite defines
-#
-
-LOADLIBES = $(PAMLIB) $(RDYNAMIC) $(PAMMISCLIB) $(LIBDL) $(ULIBS)
-
-CFLAGS += $(EXTRAS) $(MEMORY_DEBUG) $(WARNINGS) $(INCLUDEDIR) $(PIC)
-ifneq ($(strip $(OS)),)
-CFLAGS += -D$(OS)
-endif
-ifneq ($(strip $(ARCH)),)
-CFLAGS += -D$(ARCH)
-endif
-
-#
-# export the libraries-available info; the modules should know how
-# to deal with this...
-#
-export HAVE_PWDBLIB
-export HAVE_CRACKLIB
-export HAVE_AFSLIBS
-export HAVE_KRBLIBS
-
-#
-# generic exports
-#
-export MAJOR_REL # the major release of this distribution
-export MINOR_REL # the minor release of this distribution
-export DEBUG_REL # for installing a debugging version of PAM
-export OS # operating system
-export ARCH # architecture
-export CC # the C compiler
-export INSTALL # to do instalations with
-export MKDIR # to ensure directories exist
-export CFLAGS # CC flags used to compile everything
-export LD_D # build a shared object file (module)
-export LD_L # build a shared library (e.g. libpam)
-export USESONAME # does shlib link command require soname option
-export SOSWITCH # shlib lib soname switch name
-export LINKLIBS # libraries to append when making dynamic libs
-export NEEDSONAME # does shared library link need versioned lib
-export LD # build a generic library
-export LDCONFIG # rebuild the shared libraries
-export AR # build a static library
-export RANLIB # reorder a static library
-export LOADLIBES # libraries needed for application linking
-export PAMLIB # where to find the local libpam.xx file
-export DYNTYPE # which suffix is used for libraries
-export SHLIBMODE # file mode for shared objects
-export EXTRALS # libraries that some modules need
-export LIBDL # extra library for libpam.so
-#
-# where to install things
-#
-export FAKEROOT # for package maintainers
-#
-export PREFIX # basic prefix for all other directories
-export SUPLEMENTED # where to store module helper binaries
-export LIBDIR # where libpam and libpam_misc go
-export SECUREDIR # where the modules will be placed
-export INCLUDED # where to store pam---.h files
-export CONFIGED # where pam.conf and pam.d/ go
-export SCONFIGED # where modules' config files go
-
-#
-# Conditional exporting ( ... these go on for a while... )
-#
-ifdef DYNAMIC
-export DYNAMIC
-endif
-ifdef STATIC
-export STATIC
-endif
-ifdef DYNAMIC_LIBPAM
-export DYNAMIC_LIBPAM
-endif
-ifdef STATIC_LIBPAM
-export STATIC_LIBPAM
-endif
-ifdef MEMORY_DEBUG
-export MEMORY_DEBUG
-endif
-
-##
-## the rules
-##
-
-all: .freezemake headers
-
- @for i in $(DIRS) ; do \
- $(MAKE) -C $$i all ; \
- if [ $$? -ne 0 ]; then break ; fi ; \
- done
-
-.freezemake: Makefile
- @touch .freezemake
- @echo "*WARNING*: If you are running a system that is dependent"
- @echo " on PAM to work. DO NOT make sterile NOR make remove."
- @echo " These options will delete the PAM files on your system"
- @echo " and make it unusable!"
- @echo ""
- @echo "If you are in any doubt, just do 'make all' (or just"
- @echo "'make'). It is likely that this is the SAFEST thing to do...."
- @exit 1
-
-install:
- @for i in $(DIRS) ; do \
- $(MAKE) -C $$i install ; \
- if [ $$? -ne 0 ]; then break ; fi ; \
- done
-
-sterile: .freezemake
- @$(MAKE) remove
- @$(MAKE) extraclean
-
-remove: .freezemake
- @for i in $(DIRS) ; do \
- $(MAKE) -C $$i remove ; \
- done
-
-clean:
- @rm -f *~ core
- @for i in $(DIRS) ; do \
- $(MAKE) -C $$i clean ; \
- done
-
-headers:
- @mkdir -p include/security && cd include/security \
- && ln -fs ../../libpam/include/security/*.h . \
- && ln -fs ../../libpam_misc/*.h . \
- && ln -fs ../../libpamc/include/security/*.h .
-
-cl_headers:
- @cd include/security ; rm -f *.h
-
-extraclean:
- make cl_headers
- @for i in $(DIRS) doc ; do \
- $(MAKE) -C $$i extraclean ; \
- done
-
-check:
- @$(MAKE) -C conf check
-
-open:
- @find . \( -type f -a -perm 644 \) -print
-
-release:
- @egrep '^DEBUG\_REL\=yes' Makefile|grep -v grep > /dev/null ;\
- if [ $$? -eq 0 ]; then \
- echo "You should first set DEBUG_REL to no" ; exit 1 ; fi
- $(MAKE) extraclean
- rm -f .freezemake
- touch .filelist
- chmod 600 .filelist
- cd .. ; find $(RELNAME) \! -type d -print | fgrep -v 'conf/.md5sum' > $(RELNAME)/.filelist
- chmod 400 .filelist
- $(MAKE) check
- (cat .filelist ; echo $(RELNAME)/conf/.md5sum) | (cd .. ; tar -cz -f$(DISTFILE) -T-)
+ $(MAKE) distclean
+ cd .. ; tar zvfc $(DISTNAME)-$(MAJOR_REL).$(MINOR_REL).tar.gz \
+ --exclude CVS --exclude .cvsignore --exclude '.#*' \
+ $(DISTNAME)-$(MAJOR_REL).$(MINOR_REL)/*
-endif # LEGACY_OLD_MAKEFILE
projects / linux-pam / blobdiff