/*-------------------------------------------------------------------------
 *
 * date.c
 *	  implements DATE and TIME data types specified in SQL standard
 *
 * Portions Copyright (c) 1996-2019, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994-5, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  src/backend/utils/adt/date.c
 *
 *-------------------------------------------------------------------------
 */

#include "postgres.h"

#include <ctype.h>
#include <limits.h>
#include <float.h>
#include <time.h>

#include "access/xact.h"
#include "libpq/pqformat.h"
#include "miscadmin.h"
#include "nodes/supportnodes.h"
#include "parser/scansup.h"
#include "utils/array.h"
#include "utils/builtins.h"
#include "utils/date.h"
#include "utils/datetime.h"
#include "utils/hashutils.h"
#include "utils/sortsupport.h"

/*
 * gcc's -ffast-math switch breaks routines that expect exact results from
 * expressions like timeval / SECS_PER_HOUR, where timeval is double.
 */
#ifdef __FAST_MATH__
#error -ffast-math is known to break this code
#endif


/* common code for timetypmodin and timetztypmodin */
static int32
anytime_typmodin(bool istz, ArrayType *ta)
{
	int32	   *tl;
	int			n;

	tl = ArrayGetIntegerTypmods(ta, &n);

	/*
	 * we're not too tense about good error message here because grammar
	 * shouldn't allow wrong number of modifiers for TIME
	 */
	if (n != 1)
		ereport(ERROR,
				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
				 errmsg("invalid type modifier")));

	return anytime_typmod_check(istz, tl[0]);
}

/* exported so parse_expr.c can use it */
int32
anytime_typmod_check(bool istz, int32 typmod)
{
	if (typmod < 0)
		ereport(ERROR,
				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
				 errmsg("TIME(%d)%s precision must not be negative",
						typmod, (istz ? " WITH TIME ZONE" : ""))));
	if (typmod > MAX_TIME_PRECISION)
	{
		ereport(WARNING,
				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
				 errmsg("TIME(%d)%s precision reduced to maximum allowed, %d",
						typmod, (istz ? " WITH TIME ZONE" : ""),
						MAX_TIME_PRECISION)));
		typmod = MAX_TIME_PRECISION;
	}

	return typmod;
}

/* common code for timetypmodout and timetztypmodout */
static char *
anytime_typmodout(bool istz, int32 typmod)
{
	const char *tz = istz ? " with time zone" : " without time zone";

	if (typmod >= 0)
		return psprintf("(%d)%s", (int) typmod, tz);
	else
		return psprintf("%s", tz);
}


/*****************************************************************************
 *	 Date ADT
 *****************************************************************************/


/* date_in()
 * Given date text string, convert to internal date format.
 */
Datum
date_in(PG_FUNCTION_ARGS)
{
	char	   *str = PG_GETARG_CSTRING(0);
	DateADT		date;
	fsec_t		fsec;
	struct pg_tm tt,
			   *tm = &tt;
	int			tzp;
	int			dtype;
	int			nf;
	int			dterr;
	char	   *field[MAXDATEFIELDS];
	int			ftype[MAXDATEFIELDS];
	char		workbuf[MAXDATELEN + 1];

	dterr = ParseDateTime(str, workbuf, sizeof(workbuf),
						  field, ftype, MAXDATEFIELDS, &nf);
	if (dterr == 0)
		dterr = DecodeDateTime(field, ftype, nf, &dtype, tm, &fsec, &tzp);
	if (dterr != 0)
		DateTimeParseError(dterr, str, "date");

	switch (dtype)
	{
		case DTK_DATE:
			break;

		case DTK_EPOCH:
			GetEpochTime(tm);
			break;

		case DTK_LATE:
			DATE_NOEND(date);
			PG_RETURN_DATEADT(date);

		case DTK_EARLY:
			DATE_NOBEGIN(date);
			PG_RETURN_DATEADT(date);

		default:
			DateTimeParseError(DTERR_BAD_FORMAT, str, "date");
			break;
	}

	/* Prevent overflow in Julian-day routines */
	if (!IS_VALID_JULIAN(tm->tm_year, tm->tm_mon, tm->tm_mday))
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("date out of range: \"%s\"", str)));

	date = date2j(tm->tm_year, tm->tm_mon, tm->tm_mday) - POSTGRES_EPOCH_JDATE;

	/* Now check for just-out-of-range dates */
	if (!IS_VALID_DATE(date))
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("date out of range: \"%s\"", str)));

	PG_RETURN_DATEADT(date);
}

/* date_out()
 * Given internal format date, convert to text string.
 */
Datum
date_out(PG_FUNCTION_ARGS)
{
	DateADT		date = PG_GETARG_DATEADT(0);
	char	   *result;
	struct pg_tm tt,
			   *tm = &tt;
	char		buf[MAXDATELEN + 1];

	if (DATE_NOT_FINITE(date))
		EncodeSpecialDate(date, buf);
	else
	{
		j2date(date + POSTGRES_EPOCH_JDATE,
			   &(tm->tm_year), &(tm->tm_mon), &(tm->tm_mday));
		EncodeDateOnly(tm, DateStyle, buf);
	}

	result = pstrdup(buf);
	PG_RETURN_CSTRING(result);
}

/*
 *		date_recv			- converts external binary format to date
 */
Datum
date_recv(PG_FUNCTION_ARGS)
{
	StringInfo	buf = (StringInfo) PG_GETARG_POINTER(0);
	DateADT		result;

	result = (DateADT) pq_getmsgint(buf, sizeof(DateADT));

	/* Limit to the same range that date_in() accepts. */
	if (DATE_NOT_FINITE(result))
		 /* ok */ ;
	else if (!IS_VALID_DATE(result))
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("date out of range")));

	PG_RETURN_DATEADT(result);
}

/*
 *		date_send			- converts date to binary format
 */
Datum
date_send(PG_FUNCTION_ARGS)
{
	DateADT		date = PG_GETARG_DATEADT(0);
	StringInfoData buf;

	pq_begintypsend(&buf);
	pq_sendint32(&buf, date);
	PG_RETURN_BYTEA_P(pq_endtypsend(&buf));
}

/*
 *		make_date			- date constructor
 */
Datum
make_date(PG_FUNCTION_ARGS)
{
	struct pg_tm tm;
	DateADT		date;
	int			dterr;
	bool		bc = false;

	tm.tm_year = PG_GETARG_INT32(0);
	tm.tm_mon = PG_GETARG_INT32(1);
	tm.tm_mday = PG_GETARG_INT32(2);

	/* Handle negative years as BC */
	if (tm.tm_year < 0)
	{
		bc = true;
		tm.tm_year = -tm.tm_year;
	}

	dterr = ValidateDate(DTK_DATE_M, false, false, bc, &tm);

	if (dterr != 0)
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_FIELD_OVERFLOW),
				 errmsg("date field value out of range: %d-%02d-%02d",
						tm.tm_year, tm.tm_mon, tm.tm_mday)));

	/* Prevent overflow in Julian-day routines */
	if (!IS_VALID_JULIAN(tm.tm_year, tm.tm_mon, tm.tm_mday))
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("date out of range: %d-%02d-%02d",
						tm.tm_year, tm.tm_mon, tm.tm_mday)));

	date = date2j(tm.tm_year, tm.tm_mon, tm.tm_mday) - POSTGRES_EPOCH_JDATE;

	/* Now check for just-out-of-range dates */
	if (!IS_VALID_DATE(date))
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("date out of range: %d-%02d-%02d",
						tm.tm_year, tm.tm_mon, tm.tm_mday)));

	PG_RETURN_DATEADT(date);
}

/*
 * Convert reserved date values to string.
 */
void
EncodeSpecialDate(DateADT dt, char *str)
{
	if (DATE_IS_NOBEGIN(dt))
		strcpy(str, EARLY);
	else if (DATE_IS_NOEND(dt))
		strcpy(str, LATE);
	else						/* shouldn't happen */
		elog(ERROR, "invalid argument for EncodeSpecialDate");
}


/*
 * GetSQLCurrentDate -- implements CURRENT_DATE
 */
DateADT
GetSQLCurrentDate(void)
{
	TimestampTz ts;
	struct pg_tm tt,
			   *tm = &tt;
	fsec_t		fsec;
	int			tz;

	ts = GetCurrentTransactionStartTimestamp();

	if (timestamp2tm(ts, &tz, tm, &fsec, NULL, NULL) != 0)
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("timestamp out of range")));

	return date2j(tm->tm_year, tm->tm_mon, tm->tm_mday) - POSTGRES_EPOCH_JDATE;
}

/*
 * GetSQLCurrentTime -- implements CURRENT_TIME, CURRENT_TIME(n)
 */
TimeTzADT *
GetSQLCurrentTime(int32 typmod)
{
	TimeTzADT  *result;
	TimestampTz ts;
	struct pg_tm tt,
			   *tm = &tt;
	fsec_t		fsec;
	int			tz;

	ts = GetCurrentTransactionStartTimestamp();

	if (timestamp2tm(ts, &tz, tm, &fsec, NULL, NULL) != 0)
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("timestamp out of range")));

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
	tm2timetz(tm, fsec, tz, result);
	AdjustTimeForTypmod(&(result->time), typmod);
	return result;
}

/*
 * GetSQLLocalTime -- implements LOCALTIME, LOCALTIME(n)
 */
TimeADT
GetSQLLocalTime(int32 typmod)
{
	TimeADT		result;
	TimestampTz ts;
	struct pg_tm tt,
			   *tm = &tt;
	fsec_t		fsec;
	int			tz;

	ts = GetCurrentTransactionStartTimestamp();

	if (timestamp2tm(ts, &tz, tm, &fsec, NULL, NULL) != 0)
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("timestamp out of range")));

	tm2time(tm, fsec, &result);
	AdjustTimeForTypmod(&result, typmod);
	return result;
}


/*
 * Comparison functions for dates
 */

Datum
date_eq(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	PG_RETURN_BOOL(dateVal1 == dateVal2);
}

Datum
date_ne(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	PG_RETURN_BOOL(dateVal1 != dateVal2);
}

Datum
date_lt(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	PG_RETURN_BOOL(dateVal1 < dateVal2);
}

Datum
date_le(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	PG_RETURN_BOOL(dateVal1 <= dateVal2);
}

Datum
date_gt(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	PG_RETURN_BOOL(dateVal1 > dateVal2);
}

Datum
date_ge(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	PG_RETURN_BOOL(dateVal1 >= dateVal2);
}

Datum
date_cmp(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	if (dateVal1 < dateVal2)
		PG_RETURN_INT32(-1);
	else if (dateVal1 > dateVal2)
		PG_RETURN_INT32(1);
	PG_RETURN_INT32(0);
}

static int
date_fastcmp(Datum x, Datum y, SortSupport ssup)
{
	DateADT		a = DatumGetDateADT(x);
	DateADT		b = DatumGetDateADT(y);

	if (a < b)
		return -1;
	else if (a > b)
		return 1;
	return 0;
}

Datum
date_sortsupport(PG_FUNCTION_ARGS)
{
	SortSupport ssup = (SortSupport) PG_GETARG_POINTER(0);

	ssup->comparator = date_fastcmp;
	PG_RETURN_VOID();
}

Datum
date_finite(PG_FUNCTION_ARGS)
{
	DateADT		date = PG_GETARG_DATEADT(0);

	PG_RETURN_BOOL(!DATE_NOT_FINITE(date));
}

Datum
date_larger(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	PG_RETURN_DATEADT((dateVal1 > dateVal2) ? dateVal1 : dateVal2);
}

Datum
date_smaller(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	PG_RETURN_DATEADT((dateVal1 < dateVal2) ? dateVal1 : dateVal2);
}

/* Compute difference between two dates in days.
 */
Datum
date_mi(PG_FUNCTION_ARGS)
{
	DateADT		dateVal1 = PG_GETARG_DATEADT(0);
	DateADT		dateVal2 = PG_GETARG_DATEADT(1);

	if (DATE_NOT_FINITE(dateVal1) || DATE_NOT_FINITE(dateVal2))
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("cannot subtract infinite dates")));

	PG_RETURN_INT32((int32) (dateVal1 - dateVal2));
}

/* Add a number of days to a date, giving a new date.
 * Must handle both positive and negative numbers of days.
 */
Datum
date_pli(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	int32		days = PG_GETARG_INT32(1);
	DateADT		result;

	if (DATE_NOT_FINITE(dateVal))
		PG_RETURN_DATEADT(dateVal); /* can't change infinity */

	result = dateVal + days;

	/* Check for integer overflow and out-of-allowed-range */
	if ((days >= 0 ? (result < dateVal) : (result > dateVal)) ||
		!IS_VALID_DATE(result))
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("date out of range")));

	PG_RETURN_DATEADT(result);
}

/* Subtract a number of days from a date, giving a new date.
 */
Datum
date_mii(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	int32		days = PG_GETARG_INT32(1);
	DateADT		result;

	if (DATE_NOT_FINITE(dateVal))
		PG_RETURN_DATEADT(dateVal); /* can't change infinity */

	result = dateVal - days;

	/* Check for integer overflow and out-of-allowed-range */
	if ((days >= 0 ? (result > dateVal) : (result < dateVal)) ||
		!IS_VALID_DATE(result))
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("date out of range")));

	PG_RETURN_DATEADT(result);
}


/*
 * Promote date to timestamp.
 *
 * On overflow error is thrown if 'overflow' is NULL.  Otherwise, '*overflow'
 * is set to -1 (+1) when result value exceed lower (upper) boundary and zero
 * returned.
 */
Timestamp
date2timestamp_opt_overflow(DateADT dateVal, int *overflow)
{
	Timestamp	result;

	if (DATE_IS_NOBEGIN(dateVal))
		TIMESTAMP_NOBEGIN(result);
	else if (DATE_IS_NOEND(dateVal))
		TIMESTAMP_NOEND(result);
	else
	{
		/*
		 * Date's range is wider than timestamp's, so check for boundaries.
		 * Since dates have the same minimum values as timestamps, only upper
		 * boundary need be checked for overflow.
		 */
		if (dateVal >= (TIMESTAMP_END_JULIAN - POSTGRES_EPOCH_JDATE))
		{
			if (overflow)
			{
				*overflow = 1;
				return (Timestamp) 0;
			}
			else
			{
				ereport(ERROR,
						(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
						 errmsg("date out of range for timestamp")));
			}
		}

		/* date is days since 2000, timestamp is microseconds since same... */
		result = dateVal * USECS_PER_DAY;
	}

	return result;
}

/*
 * Single-argument version of date2timestamp_opt_overflow().
 */
static TimestampTz
date2timestamp(DateADT dateVal)
{
	return date2timestamp_opt_overflow(dateVal, NULL);
}

/*
 * Promote date to timestamp with time zone.
 *
 * On overflow error is thrown if 'overflow' is NULL.  Otherwise, '*overflow'
 * is set to -1 (+1) when result value exceed lower (upper) boundary and zero
 * returned.
 */
TimestampTz
date2timestamptz_opt_overflow(DateADT dateVal, int *overflow)
{
	TimestampTz result;
	struct pg_tm tt,
			   *tm = &tt;
	int			tz;

	if (DATE_IS_NOBEGIN(dateVal))
		TIMESTAMP_NOBEGIN(result);
	else if (DATE_IS_NOEND(dateVal))
		TIMESTAMP_NOEND(result);
	else
	{
		/*
		 * Date's range is wider than timestamp's, so check for boundaries.
		 * Since dates have the same minimum values as timestamps, only upper
		 * boundary need be checked for overflow.
		 */
		if (dateVal >= (TIMESTAMP_END_JULIAN - POSTGRES_EPOCH_JDATE))
		{
			if (overflow)
			{
				*overflow = 1;
				return (TimestampTz) 0;
			}
			else
			{
				ereport(ERROR,
						(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
						 errmsg("date out of range for timestamp")));
			}
		}

		j2date(dateVal + POSTGRES_EPOCH_JDATE,
			   &(tm->tm_year), &(tm->tm_mon), &(tm->tm_mday));
		tm->tm_hour = 0;
		tm->tm_min = 0;
		tm->tm_sec = 0;
		tz = DetermineTimeZoneOffset(tm, session_timezone);

		result = dateVal * USECS_PER_DAY + tz * USECS_PER_SEC;

		/*
		 * Since it is possible to go beyond allowed timestamptz range because
		 * of time zone, check for allowed timestamp range after adding tz.
		 */
		if (!IS_VALID_TIMESTAMP(result))
		{
			if (overflow)
			{
				if (result < MIN_TIMESTAMP)
					*overflow = -1;
				else
				{
					Assert(result >= END_TIMESTAMP);
					*overflow = 1;
				}
				return (TimestampTz) 0;
			}
			else
			{
				ereport(ERROR,
						(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
						 errmsg("date out of range for timestamp")));
			}
		}
	}

	return result;
}

/*
 * Single-argument version of date2timestamptz_opt_overflow().
 */
static TimestampTz
date2timestamptz(DateADT dateVal)
{
	return date2timestamptz_opt_overflow(dateVal, NULL);
}

/*
 * date2timestamp_no_overflow
 *
 * This is chartered to produce a double value that is numerically
 * equivalent to the corresponding Timestamp value, if the date is in the
 * valid range of Timestamps, but in any case not throw an overflow error.
 * We can do this since the numerical range of double is greater than
 * that of non-erroneous timestamps.  The results are currently only
 * used for statistical estimation purposes.
 */
double
date2timestamp_no_overflow(DateADT dateVal)
{
	double		result;

	if (DATE_IS_NOBEGIN(dateVal))
		result = -DBL_MAX;
	else if (DATE_IS_NOEND(dateVal))
		result = DBL_MAX;
	else
	{
		/* date is days since 2000, timestamp is microseconds since same... */
		result = dateVal * (double) USECS_PER_DAY;
	}

	return result;
}


/*
 * Crosstype comparison functions for dates
 */

Datum
date_eq_timestamp(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Timestamp	dt2 = PG_GETARG_TIMESTAMP(1);
	Timestamp	dt1;

	dt1 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) == 0);
}

Datum
date_ne_timestamp(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Timestamp	dt2 = PG_GETARG_TIMESTAMP(1);
	Timestamp	dt1;

	dt1 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) != 0);
}

Datum
date_lt_timestamp(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Timestamp	dt2 = PG_GETARG_TIMESTAMP(1);
	Timestamp	dt1;

	dt1 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) < 0);
}

Datum
date_gt_timestamp(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Timestamp	dt2 = PG_GETARG_TIMESTAMP(1);
	Timestamp	dt1;

	dt1 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) > 0);
}

Datum
date_le_timestamp(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Timestamp	dt2 = PG_GETARG_TIMESTAMP(1);
	Timestamp	dt1;

	dt1 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) <= 0);
}

Datum
date_ge_timestamp(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Timestamp	dt2 = PG_GETARG_TIMESTAMP(1);
	Timestamp	dt1;

	dt1 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) >= 0);
}

Datum
date_cmp_timestamp(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Timestamp	dt2 = PG_GETARG_TIMESTAMP(1);
	Timestamp	dt1;

	dt1 = date2timestamp(dateVal);

	PG_RETURN_INT32(timestamp_cmp_internal(dt1, dt2));
}

Datum
date_eq_timestamptz(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
	TimestampTz dt1;

	dt1 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) == 0);
}

Datum
date_ne_timestamptz(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
	TimestampTz dt1;

	dt1 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) != 0);
}

Datum
date_lt_timestamptz(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
	TimestampTz dt1;

	dt1 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) < 0);
}

Datum
date_gt_timestamptz(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
	TimestampTz dt1;

	dt1 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) > 0);
}

Datum
date_le_timestamptz(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
	TimestampTz dt1;

	dt1 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) <= 0);
}

Datum
date_ge_timestamptz(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
	TimestampTz dt1;

	dt1 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) >= 0);
}

Datum
date_cmp_timestamptz(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	TimestampTz dt2 = PG_GETARG_TIMESTAMPTZ(1);
	TimestampTz dt1;

	dt1 = date2timestamptz(dateVal);

	PG_RETURN_INT32(timestamptz_cmp_internal(dt1, dt2));
}

Datum
timestamp_eq_date(PG_FUNCTION_ARGS)
{
	Timestamp	dt1 = PG_GETARG_TIMESTAMP(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	Timestamp	dt2;

	dt2 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) == 0);
}

Datum
timestamp_ne_date(PG_FUNCTION_ARGS)
{
	Timestamp	dt1 = PG_GETARG_TIMESTAMP(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	Timestamp	dt2;

	dt2 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) != 0);
}

Datum
timestamp_lt_date(PG_FUNCTION_ARGS)
{
	Timestamp	dt1 = PG_GETARG_TIMESTAMP(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	Timestamp	dt2;

	dt2 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) < 0);
}

Datum
timestamp_gt_date(PG_FUNCTION_ARGS)
{
	Timestamp	dt1 = PG_GETARG_TIMESTAMP(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	Timestamp	dt2;

	dt2 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) > 0);
}

Datum
timestamp_le_date(PG_FUNCTION_ARGS)
{
	Timestamp	dt1 = PG_GETARG_TIMESTAMP(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	Timestamp	dt2;

	dt2 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) <= 0);
}

Datum
timestamp_ge_date(PG_FUNCTION_ARGS)
{
	Timestamp	dt1 = PG_GETARG_TIMESTAMP(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	Timestamp	dt2;

	dt2 = date2timestamp(dateVal);

	PG_RETURN_BOOL(timestamp_cmp_internal(dt1, dt2) >= 0);
}

Datum
timestamp_cmp_date(PG_FUNCTION_ARGS)
{
	Timestamp	dt1 = PG_GETARG_TIMESTAMP(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	Timestamp	dt2;

	dt2 = date2timestamp(dateVal);

	PG_RETURN_INT32(timestamp_cmp_internal(dt1, dt2));
}

Datum
timestamptz_eq_date(PG_FUNCTION_ARGS)
{
	TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	TimestampTz dt2;

	dt2 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) == 0);
}

Datum
timestamptz_ne_date(PG_FUNCTION_ARGS)
{
	TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	TimestampTz dt2;

	dt2 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) != 0);
}

Datum
timestamptz_lt_date(PG_FUNCTION_ARGS)
{
	TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	TimestampTz dt2;

	dt2 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) < 0);
}

Datum
timestamptz_gt_date(PG_FUNCTION_ARGS)
{
	TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	TimestampTz dt2;

	dt2 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) > 0);
}

Datum
timestamptz_le_date(PG_FUNCTION_ARGS)
{
	TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	TimestampTz dt2;

	dt2 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) <= 0);
}

Datum
timestamptz_ge_date(PG_FUNCTION_ARGS)
{
	TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	TimestampTz dt2;

	dt2 = date2timestamptz(dateVal);

	PG_RETURN_BOOL(timestamptz_cmp_internal(dt1, dt2) >= 0);
}

Datum
timestamptz_cmp_date(PG_FUNCTION_ARGS)
{
	TimestampTz dt1 = PG_GETARG_TIMESTAMPTZ(0);
	DateADT		dateVal = PG_GETARG_DATEADT(1);
	TimestampTz dt2;

	dt2 = date2timestamptz(dateVal);

	PG_RETURN_INT32(timestamptz_cmp_internal(dt1, dt2));
}

/*
 * in_range support function for date.
 *
 * We implement this by promoting the dates to timestamp (without time zone)
 * and then using the timestamp-and-interval in_range function.
 */
Datum
in_range_date_interval(PG_FUNCTION_ARGS)
{
	DateADT		val = PG_GETARG_DATEADT(0);
	DateADT		base = PG_GETARG_DATEADT(1);
	Interval   *offset = PG_GETARG_INTERVAL_P(2);
	bool		sub = PG_GETARG_BOOL(3);
	bool		less = PG_GETARG_BOOL(4);
	Timestamp	valStamp;
	Timestamp	baseStamp;

	valStamp = date2timestamp(val);
	baseStamp = date2timestamp(base);

	return DirectFunctionCall5(in_range_timestamp_interval,
							   TimestampGetDatum(valStamp),
							   TimestampGetDatum(baseStamp),
							   IntervalPGetDatum(offset),
							   BoolGetDatum(sub),
							   BoolGetDatum(less));
}


/* Add an interval to a date, giving a new date.
 * Must handle both positive and negative intervals.
 *
 * We implement this by promoting the date to timestamp (without time zone)
 * and then using the timestamp plus interval function.
 */
Datum
date_pl_interval(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Interval   *span = PG_GETARG_INTERVAL_P(1);
	Timestamp	dateStamp;

	dateStamp = date2timestamp(dateVal);

	return DirectFunctionCall2(timestamp_pl_interval,
							   TimestampGetDatum(dateStamp),
							   PointerGetDatum(span));
}

/* Subtract an interval from a date, giving a new date.
 * Must handle both positive and negative intervals.
 *
 * We implement this by promoting the date to timestamp (without time zone)
 * and then using the timestamp minus interval function.
 */
Datum
date_mi_interval(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Interval   *span = PG_GETARG_INTERVAL_P(1);
	Timestamp	dateStamp;

	dateStamp = date2timestamp(dateVal);

	return DirectFunctionCall2(timestamp_mi_interval,
							   TimestampGetDatum(dateStamp),
							   PointerGetDatum(span));
}

/* date_timestamp()
 * Convert date to timestamp data type.
 */
Datum
date_timestamp(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	Timestamp	result;

	result = date2timestamp(dateVal);

	PG_RETURN_TIMESTAMP(result);
}

/* timestamp_date()
 * Convert timestamp to date data type.
 */
Datum
timestamp_date(PG_FUNCTION_ARGS)
{
	Timestamp	timestamp = PG_GETARG_TIMESTAMP(0);
	DateADT		result;
	struct pg_tm tt,
			   *tm = &tt;
	fsec_t		fsec;

	if (TIMESTAMP_IS_NOBEGIN(timestamp))
		DATE_NOBEGIN(result);
	else if (TIMESTAMP_IS_NOEND(timestamp))
		DATE_NOEND(result);
	else
	{
		if (timestamp2tm(timestamp, NULL, tm, &fsec, NULL, NULL) != 0)
			ereport(ERROR,
					(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
					 errmsg("timestamp out of range")));

		result = date2j(tm->tm_year, tm->tm_mon, tm->tm_mday) - POSTGRES_EPOCH_JDATE;
	}

	PG_RETURN_DATEADT(result);
}


/* date_timestamptz()
 * Convert date to timestamp with time zone data type.
 */
Datum
date_timestamptz(PG_FUNCTION_ARGS)
{
	DateADT		dateVal = PG_GETARG_DATEADT(0);
	TimestampTz result;

	result = date2timestamptz(dateVal);

	PG_RETURN_TIMESTAMP(result);
}


/* timestamptz_date()
 * Convert timestamp with time zone to date data type.
 */
Datum
timestamptz_date(PG_FUNCTION_ARGS)
{
	TimestampTz timestamp = PG_GETARG_TIMESTAMP(0);
	DateADT		result;
	struct pg_tm tt,
			   *tm = &tt;
	fsec_t		fsec;
	int			tz;

	if (TIMESTAMP_IS_NOBEGIN(timestamp))
		DATE_NOBEGIN(result);
	else if (TIMESTAMP_IS_NOEND(timestamp))
		DATE_NOEND(result);
	else
	{
		if (timestamp2tm(timestamp, &tz, tm, &fsec, NULL, NULL) != 0)
			ereport(ERROR,
					(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
					 errmsg("timestamp out of range")));

		result = date2j(tm->tm_year, tm->tm_mon, tm->tm_mday) - POSTGRES_EPOCH_JDATE;
	}

	PG_RETURN_DATEADT(result);
}


/*****************************************************************************
 *	 Time ADT
 *****************************************************************************/

Datum
time_in(PG_FUNCTION_ARGS)
{
	char	   *str = PG_GETARG_CSTRING(0);

#ifdef NOT_USED
	Oid			typelem = PG_GETARG_OID(1);
#endif
	int32		typmod = PG_GETARG_INT32(2);
	TimeADT		result;
	fsec_t		fsec;
	struct pg_tm tt,
			   *tm = &tt;
	int			tz;
	int			nf;
	int			dterr;
	char		workbuf[MAXDATELEN + 1];
	char	   *field[MAXDATEFIELDS];
	int			dtype;
	int			ftype[MAXDATEFIELDS];

	dterr = ParseDateTime(str, workbuf, sizeof(workbuf),
						  field, ftype, MAXDATEFIELDS, &nf);
	if (dterr == 0)
		dterr = DecodeTimeOnly(field, ftype, nf, &dtype, tm, &fsec, &tz);
	if (dterr != 0)
		DateTimeParseError(dterr, str, "time");

	tm2time(tm, fsec, &result);
	AdjustTimeForTypmod(&result, typmod);

	PG_RETURN_TIMEADT(result);
}

/* tm2time()
 * Convert a tm structure to a time data type.
 */
int
tm2time(struct pg_tm *tm, fsec_t fsec, TimeADT *result)
{
	*result = ((((tm->tm_hour * MINS_PER_HOUR + tm->tm_min) * SECS_PER_MINUTE) + tm->tm_sec)
			   * USECS_PER_SEC) + fsec;
	return 0;
}

/* time2tm()
 * Convert time data type to POSIX time structure.
 *
 * For dates within the range of pg_time_t, convert to the local time zone.
 * If out of this range, leave as UTC (in practice that could only happen
 * if pg_time_t is just 32 bits) - thomas 97/05/27
 */
int
time2tm(TimeADT time, struct pg_tm *tm, fsec_t *fsec)
{
	tm->tm_hour = time / USECS_PER_HOUR;
	time -= tm->tm_hour * USECS_PER_HOUR;
	tm->tm_min = time / USECS_PER_MINUTE;
	time -= tm->tm_min * USECS_PER_MINUTE;
	tm->tm_sec = time / USECS_PER_SEC;
	time -= tm->tm_sec * USECS_PER_SEC;
	*fsec = time;
	return 0;
}

Datum
time_out(PG_FUNCTION_ARGS)
{
	TimeADT		time = PG_GETARG_TIMEADT(0);
	char	   *result;
	struct pg_tm tt,
			   *tm = &tt;
	fsec_t		fsec;
	char		buf[MAXDATELEN + 1];

	time2tm(time, tm, &fsec);
	EncodeTimeOnly(tm, fsec, false, 0, DateStyle, buf);

	result = pstrdup(buf);
	PG_RETURN_CSTRING(result);
}

/*
 *		time_recv			- converts external binary format to time
 */
Datum
time_recv(PG_FUNCTION_ARGS)
{
	StringInfo	buf = (StringInfo) PG_GETARG_POINTER(0);

#ifdef NOT_USED
	Oid			typelem = PG_GETARG_OID(1);
#endif
	int32		typmod = PG_GETARG_INT32(2);
	TimeADT		result;

	result = pq_getmsgint64(buf);

	if (result < INT64CONST(0) || result > USECS_PER_DAY)
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("time out of range")));

	AdjustTimeForTypmod(&result, typmod);

	PG_RETURN_TIMEADT(result);
}

/*
 *		time_send			- converts time to binary format
 */
Datum
time_send(PG_FUNCTION_ARGS)
{
	TimeADT		time = PG_GETARG_TIMEADT(0);
	StringInfoData buf;

	pq_begintypsend(&buf);
	pq_sendint64(&buf, time);
	PG_RETURN_BYTEA_P(pq_endtypsend(&buf));
}

Datum
timetypmodin(PG_FUNCTION_ARGS)
{
	ArrayType  *ta = PG_GETARG_ARRAYTYPE_P(0);

	PG_RETURN_INT32(anytime_typmodin(false, ta));
}

Datum
timetypmodout(PG_FUNCTION_ARGS)
{
	int32		typmod = PG_GETARG_INT32(0);

	PG_RETURN_CSTRING(anytime_typmodout(false, typmod));
}

/*
 *		make_time			- time constructor
 */
Datum
make_time(PG_FUNCTION_ARGS)
{
	int			tm_hour = PG_GETARG_INT32(0);
	int			tm_min = PG_GETARG_INT32(1);
	double		sec = PG_GETARG_FLOAT8(2);
	TimeADT		time;

	/* This should match the checks in DecodeTimeOnly */
	if (tm_hour < 0 || tm_min < 0 || tm_min > MINS_PER_HOUR - 1 ||
		sec < 0 || sec > SECS_PER_MINUTE ||
		tm_hour > HOURS_PER_DAY ||
	/* test for > 24:00:00 */
		(tm_hour == HOURS_PER_DAY && (tm_min > 0 || sec > 0)))
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_FIELD_OVERFLOW),
				 errmsg("time field value out of range: %d:%02d:%02g",
						tm_hour, tm_min, sec)));

	/* This should match tm2time */
	time = (((tm_hour * MINS_PER_HOUR + tm_min) * SECS_PER_MINUTE)
			* USECS_PER_SEC) + rint(sec * USECS_PER_SEC);

	PG_RETURN_TIMEADT(time);
}


/* time_support()
 *
 * Planner support function for the time_scale() and timetz_scale()
 * length coercion functions (we need not distinguish them here).
 */
Datum
time_support(PG_FUNCTION_ARGS)
{
	Node	   *rawreq = (Node *) PG_GETARG_POINTER(0);
	Node	   *ret = NULL;

	if (IsA(rawreq, SupportRequestSimplify))
	{
		SupportRequestSimplify *req = (SupportRequestSimplify *) rawreq;

		ret = TemporalSimplify(MAX_TIME_PRECISION, (Node *) req->fcall);
	}

	PG_RETURN_POINTER(ret);
}

/* time_scale()
 * Adjust time type for specified scale factor.
 * Used by PostgreSQL type system to stuff columns.
 */
Datum
time_scale(PG_FUNCTION_ARGS)
{
	TimeADT		time = PG_GETARG_TIMEADT(0);
	int32		typmod = PG_GETARG_INT32(1);
	TimeADT		result;

	result = time;
	AdjustTimeForTypmod(&result, typmod);

	PG_RETURN_TIMEADT(result);
}

/* AdjustTimeForTypmod()
 * Force the precision of the time value to a specified value.
 * Uses *exactly* the same code as in AdjustTimestampForTypmod()
 * but we make a separate copy because those types do not
 * have a fundamental tie together but rather a coincidence of
 * implementation. - thomas
 */
void
AdjustTimeForTypmod(TimeADT *time, int32 typmod)
{
	static const int64 TimeScales[MAX_TIME_PRECISION + 1] = {
		INT64CONST(1000000),
		INT64CONST(100000),
		INT64CONST(10000),
		INT64CONST(1000),
		INT64CONST(100),
		INT64CONST(10),
		INT64CONST(1)
	};

	static const int64 TimeOffsets[MAX_TIME_PRECISION + 1] = {
		INT64CONST(500000),
		INT64CONST(50000),
		INT64CONST(5000),
		INT64CONST(500),
		INT64CONST(50),
		INT64CONST(5),
		INT64CONST(0)
	};

	if (typmod >= 0 && typmod <= MAX_TIME_PRECISION)
	{
		if (*time >= INT64CONST(0))
			*time = ((*time + TimeOffsets[typmod]) / TimeScales[typmod]) *
				TimeScales[typmod];
		else
			*time = -((((-*time) + TimeOffsets[typmod]) / TimeScales[typmod]) *
					  TimeScales[typmod]);
	}
}


Datum
time_eq(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);

	PG_RETURN_BOOL(time1 == time2);
}

Datum
time_ne(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);

	PG_RETURN_BOOL(time1 != time2);
}

Datum
time_lt(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);

	PG_RETURN_BOOL(time1 < time2);
}

Datum
time_le(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);

	PG_RETURN_BOOL(time1 <= time2);
}

Datum
time_gt(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);

	PG_RETURN_BOOL(time1 > time2);
}

Datum
time_ge(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);

	PG_RETURN_BOOL(time1 >= time2);
}

Datum
time_cmp(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);

	if (time1 < time2)
		PG_RETURN_INT32(-1);
	if (time1 > time2)
		PG_RETURN_INT32(1);
	PG_RETURN_INT32(0);
}

Datum
time_hash(PG_FUNCTION_ARGS)
{
	return hashint8(fcinfo);
}

Datum
time_hash_extended(PG_FUNCTION_ARGS)
{
	return hashint8extended(fcinfo);
}

Datum
time_larger(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);

	PG_RETURN_TIMEADT((time1 > time2) ? time1 : time2);
}

Datum
time_smaller(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);

	PG_RETURN_TIMEADT((time1 < time2) ? time1 : time2);
}

/* overlaps_time() --- implements the SQL OVERLAPS operator.
 *
 * Algorithm is per SQL spec.  This is much harder than you'd think
 * because the spec requires us to deliver a non-null answer in some cases
 * where some of the inputs are null.
 */
Datum
overlaps_time(PG_FUNCTION_ARGS)
{
	/*
	 * The arguments are TimeADT, but we leave them as generic Datums to avoid
	 * dereferencing nulls (TimeADT is pass-by-reference!)
	 */
	Datum		ts1 = PG_GETARG_DATUM(0);
	Datum		te1 = PG_GETARG_DATUM(1);
	Datum		ts2 = PG_GETARG_DATUM(2);
	Datum		te2 = PG_GETARG_DATUM(3);
	bool		ts1IsNull = PG_ARGISNULL(0);
	bool		te1IsNull = PG_ARGISNULL(1);
	bool		ts2IsNull = PG_ARGISNULL(2);
	bool		te2IsNull = PG_ARGISNULL(3);

#define TIMEADT_GT(t1,t2) \
	(DatumGetTimeADT(t1) > DatumGetTimeADT(t2))
#define TIMEADT_LT(t1,t2) \
	(DatumGetTimeADT(t1) < DatumGetTimeADT(t2))

	/*
	 * If both endpoints of interval 1 are null, the result is null (unknown).
	 * If just one endpoint is null, take ts1 as the non-null one. Otherwise,
	 * take ts1 as the lesser endpoint.
	 */
	if (ts1IsNull)
	{
		if (te1IsNull)
			PG_RETURN_NULL();
		/* swap null for non-null */
		ts1 = te1;
		te1IsNull = true;
	}
	else if (!te1IsNull)
	{
		if (TIMEADT_GT(ts1, te1))
		{
			Datum		tt = ts1;

			ts1 = te1;
			te1 = tt;
		}
	}

	/* Likewise for interval 2. */
	if (ts2IsNull)
	{
		if (te2IsNull)
			PG_RETURN_NULL();
		/* swap null for non-null */
		ts2 = te2;
		te2IsNull = true;
	}
	else if (!te2IsNull)
	{
		if (TIMEADT_GT(ts2, te2))
		{
			Datum		tt = ts2;

			ts2 = te2;
			te2 = tt;
		}
	}

	/*
	 * At this point neither ts1 nor ts2 is null, so we can consider three
	 * cases: ts1 > ts2, ts1 < ts2, ts1 = ts2
	 */
	if (TIMEADT_GT(ts1, ts2))
	{
		/*
		 * This case is ts1 < te2 OR te1 < te2, which may look redundant but
		 * in the presence of nulls it's not quite completely so.
		 */
		if (te2IsNull)
			PG_RETURN_NULL();
		if (TIMEADT_LT(ts1, te2))
			PG_RETURN_BOOL(true);
		if (te1IsNull)
			PG_RETURN_NULL();

		/*
		 * If te1 is not null then we had ts1 <= te1 above, and we just found
		 * ts1 >= te2, hence te1 >= te2.
		 */
		PG_RETURN_BOOL(false);
	}
	else if (TIMEADT_LT(ts1, ts2))
	{
		/* This case is ts2 < te1 OR te2 < te1 */
		if (te1IsNull)
			PG_RETURN_NULL();
		if (TIMEADT_LT(ts2, te1))
			PG_RETURN_BOOL(true);
		if (te2IsNull)
			PG_RETURN_NULL();

		/*
		 * If te2 is not null then we had ts2 <= te2 above, and we just found
		 * ts2 >= te1, hence te2 >= te1.
		 */
		PG_RETURN_BOOL(false);
	}
	else
	{
		/*
		 * For ts1 = ts2 the spec says te1 <> te2 OR te1 = te2, which is a
		 * rather silly way of saying "true if both are nonnull, else null".
		 */
		if (te1IsNull || te2IsNull)
			PG_RETURN_NULL();
		PG_RETURN_BOOL(true);
	}

#undef TIMEADT_GT
#undef TIMEADT_LT
}

/* timestamp_time()
 * Convert timestamp to time data type.
 */
Datum
timestamp_time(PG_FUNCTION_ARGS)
{
	Timestamp	timestamp = PG_GETARG_TIMESTAMP(0);
	TimeADT		result;
	struct pg_tm tt,
			   *tm = &tt;
	fsec_t		fsec;

	if (TIMESTAMP_NOT_FINITE(timestamp))
		PG_RETURN_NULL();

	if (timestamp2tm(timestamp, NULL, tm, &fsec, NULL, NULL) != 0)
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("timestamp out of range")));

	/*
	 * Could also do this with time = (timestamp / USECS_PER_DAY *
	 * USECS_PER_DAY) - timestamp;
	 */
	result = ((((tm->tm_hour * MINS_PER_HOUR + tm->tm_min) * SECS_PER_MINUTE) + tm->tm_sec) *
			  USECS_PER_SEC) + fsec;

	PG_RETURN_TIMEADT(result);
}

/* timestamptz_time()
 * Convert timestamptz to time data type.
 */
Datum
timestamptz_time(PG_FUNCTION_ARGS)
{
	TimestampTz timestamp = PG_GETARG_TIMESTAMP(0);
	TimeADT		result;
	struct pg_tm tt,
			   *tm = &tt;
	int			tz;
	fsec_t		fsec;

	if (TIMESTAMP_NOT_FINITE(timestamp))
		PG_RETURN_NULL();

	if (timestamp2tm(timestamp, &tz, tm, &fsec, NULL, NULL) != 0)
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("timestamp out of range")));

	/*
	 * Could also do this with time = (timestamp / USECS_PER_DAY *
	 * USECS_PER_DAY) - timestamp;
	 */
	result = ((((tm->tm_hour * MINS_PER_HOUR + tm->tm_min) * SECS_PER_MINUTE) + tm->tm_sec) *
			  USECS_PER_SEC) + fsec;

	PG_RETURN_TIMEADT(result);
}

/* datetime_timestamp()
 * Convert date and time to timestamp data type.
 */
Datum
datetime_timestamp(PG_FUNCTION_ARGS)
{
	DateADT		date = PG_GETARG_DATEADT(0);
	TimeADT		time = PG_GETARG_TIMEADT(1);
	Timestamp	result;

	result = date2timestamp(date);
	if (!TIMESTAMP_NOT_FINITE(result))
	{
		result += time;
		if (!IS_VALID_TIMESTAMP(result))
			ereport(ERROR,
					(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
					 errmsg("timestamp out of range")));
	}

	PG_RETURN_TIMESTAMP(result);
}

/* time_interval()
 * Convert time to interval data type.
 */
Datum
time_interval(PG_FUNCTION_ARGS)
{
	TimeADT		time = PG_GETARG_TIMEADT(0);
	Interval   *result;

	result = (Interval *) palloc(sizeof(Interval));

	result->time = time;
	result->day = 0;
	result->month = 0;

	PG_RETURN_INTERVAL_P(result);
}

/* interval_time()
 * Convert interval to time data type.
 *
 * This is defined as producing the fractional-day portion of the interval.
 * Therefore, we can just ignore the months field.  It is not real clear
 * what to do with negative intervals, but we choose to subtract the floor,
 * so that, say, '-2 hours' becomes '22:00:00'.
 */
Datum
interval_time(PG_FUNCTION_ARGS)
{
	Interval   *span = PG_GETARG_INTERVAL_P(0);
	TimeADT		result;
	int64		days;

	result = span->time;
	if (result >= USECS_PER_DAY)
	{
		days = result / USECS_PER_DAY;
		result -= days * USECS_PER_DAY;
	}
	else if (result < 0)
	{
		days = (-result + USECS_PER_DAY - 1) / USECS_PER_DAY;
		result += days * USECS_PER_DAY;
	}

	PG_RETURN_TIMEADT(result);
}

/* time_mi_time()
 * Subtract two times to produce an interval.
 */
Datum
time_mi_time(PG_FUNCTION_ARGS)
{
	TimeADT		time1 = PG_GETARG_TIMEADT(0);
	TimeADT		time2 = PG_GETARG_TIMEADT(1);
	Interval   *result;

	result = (Interval *) palloc(sizeof(Interval));

	result->month = 0;
	result->day = 0;
	result->time = time1 - time2;

	PG_RETURN_INTERVAL_P(result);
}

/* time_pl_interval()
 * Add interval to time.
 */
Datum
time_pl_interval(PG_FUNCTION_ARGS)
{
	TimeADT		time = PG_GETARG_TIMEADT(0);
	Interval   *span = PG_GETARG_INTERVAL_P(1);
	TimeADT		result;

	result = time + span->time;
	result -= result / USECS_PER_DAY * USECS_PER_DAY;
	if (result < INT64CONST(0))
		result += USECS_PER_DAY;

	PG_RETURN_TIMEADT(result);
}

/* time_mi_interval()
 * Subtract interval from time.
 */
Datum
time_mi_interval(PG_FUNCTION_ARGS)
{
	TimeADT		time = PG_GETARG_TIMEADT(0);
	Interval   *span = PG_GETARG_INTERVAL_P(1);
	TimeADT		result;

	result = time - span->time;
	result -= result / USECS_PER_DAY * USECS_PER_DAY;
	if (result < INT64CONST(0))
		result += USECS_PER_DAY;

	PG_RETURN_TIMEADT(result);
}

/*
 * in_range support function for time.
 */
Datum
in_range_time_interval(PG_FUNCTION_ARGS)
{
	TimeADT		val = PG_GETARG_TIMEADT(0);
	TimeADT		base = PG_GETARG_TIMEADT(1);
	Interval   *offset = PG_GETARG_INTERVAL_P(2);
	bool		sub = PG_GETARG_BOOL(3);
	bool		less = PG_GETARG_BOOL(4);
	TimeADT		sum;

	/*
	 * Like time_pl_interval/time_mi_interval, we disregard the month and day
	 * fields of the offset.  So our test for negative should too.
	 */
	if (offset->time < 0)
		ereport(ERROR,
				(errcode(ERRCODE_INVALID_PRECEDING_OR_FOLLOWING_SIZE),
				 errmsg("invalid preceding or following size in window function")));

	/*
	 * We can't use time_pl_interval/time_mi_interval here, because their
	 * wraparound behavior would give wrong (or at least undesirable) answers.
	 * Fortunately the equivalent non-wrapping behavior is trivial, especially
	 * since we don't worry about integer overflow.
	 */
	if (sub)
		sum = base - offset->time;
	else
		sum = base + offset->time;

	if (less)
		PG_RETURN_BOOL(val <= sum);
	else
		PG_RETURN_BOOL(val >= sum);
}


/* time_part()
 * Extract specified field from time type.
 */
Datum
time_part(PG_FUNCTION_ARGS)
{
	text	   *units = PG_GETARG_TEXT_PP(0);
	TimeADT		time = PG_GETARG_TIMEADT(1);
	float8		result;
	int			type,
				val;
	char	   *lowunits;

	lowunits = downcase_truncate_identifier(VARDATA_ANY(units),
											VARSIZE_ANY_EXHDR(units),
											false);

	type = DecodeUnits(0, lowunits, &val);
	if (type == UNKNOWN_FIELD)
		type = DecodeSpecial(0, lowunits, &val);

	if (type == UNITS)
	{
		fsec_t		fsec;
		struct pg_tm tt,
				   *tm = &tt;

		time2tm(time, tm, &fsec);

		switch (val)
		{
			case DTK_MICROSEC:
				result = tm->tm_sec * 1000000.0 + fsec;
				break;

			case DTK_MILLISEC:
				result = tm->tm_sec * 1000.0 + fsec / 1000.0;
				break;

			case DTK_SECOND:
				result = tm->tm_sec + fsec / 1000000.0;
				break;

			case DTK_MINUTE:
				result = tm->tm_min;
				break;

			case DTK_HOUR:
				result = tm->tm_hour;
				break;

			case DTK_TZ:
			case DTK_TZ_MINUTE:
			case DTK_TZ_HOUR:
			case DTK_DAY:
			case DTK_MONTH:
			case DTK_QUARTER:
			case DTK_YEAR:
			case DTK_DECADE:
			case DTK_CENTURY:
			case DTK_MILLENNIUM:
			case DTK_ISOYEAR:
			default:
				ereport(ERROR,
						(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
						 errmsg("\"time\" units \"%s\" not recognized",
								lowunits)));
				result = 0;
		}
	}
	else if (type == RESERV && val == DTK_EPOCH)
	{
		result = time / 1000000.0;
	}
	else
	{
		ereport(ERROR,
				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
				 errmsg("\"time\" units \"%s\" not recognized",
						lowunits)));
		result = 0;
	}

	PG_RETURN_FLOAT8(result);
}


/*****************************************************************************
 *	 Time With Time Zone ADT
 *****************************************************************************/

/* tm2timetz()
 * Convert a tm structure to a time data type.
 */
int
tm2timetz(struct pg_tm *tm, fsec_t fsec, int tz, TimeTzADT *result)
{
	result->time = ((((tm->tm_hour * MINS_PER_HOUR + tm->tm_min) * SECS_PER_MINUTE) + tm->tm_sec) *
					USECS_PER_SEC) + fsec;
	result->zone = tz;

	return 0;
}

Datum
timetz_in(PG_FUNCTION_ARGS)
{
	char	   *str = PG_GETARG_CSTRING(0);

#ifdef NOT_USED
	Oid			typelem = PG_GETARG_OID(1);
#endif
	int32		typmod = PG_GETARG_INT32(2);
	TimeTzADT  *result;
	fsec_t		fsec;
	struct pg_tm tt,
			   *tm = &tt;
	int			tz;
	int			nf;
	int			dterr;
	char		workbuf[MAXDATELEN + 1];
	char	   *field[MAXDATEFIELDS];
	int			dtype;
	int			ftype[MAXDATEFIELDS];

	dterr = ParseDateTime(str, workbuf, sizeof(workbuf),
						  field, ftype, MAXDATEFIELDS, &nf);
	if (dterr == 0)
		dterr = DecodeTimeOnly(field, ftype, nf, &dtype, tm, &fsec, &tz);
	if (dterr != 0)
		DateTimeParseError(dterr, str, "time with time zone");

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));
	tm2timetz(tm, fsec, tz, result);
	AdjustTimeForTypmod(&(result->time), typmod);

	PG_RETURN_TIMETZADT_P(result);
}

Datum
timetz_out(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time = PG_GETARG_TIMETZADT_P(0);
	char	   *result;
	struct pg_tm tt,
			   *tm = &tt;
	fsec_t		fsec;
	int			tz;
	char		buf[MAXDATELEN + 1];

	timetz2tm(time, tm, &fsec, &tz);
	EncodeTimeOnly(tm, fsec, true, tz, DateStyle, buf);

	result = pstrdup(buf);
	PG_RETURN_CSTRING(result);
}

/*
 *		timetz_recv			- converts external binary format to timetz
 */
Datum
timetz_recv(PG_FUNCTION_ARGS)
{
	StringInfo	buf = (StringInfo) PG_GETARG_POINTER(0);

#ifdef NOT_USED
	Oid			typelem = PG_GETARG_OID(1);
#endif
	int32		typmod = PG_GETARG_INT32(2);
	TimeTzADT  *result;

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));

	result->time = pq_getmsgint64(buf);

	if (result->time < INT64CONST(0) || result->time > USECS_PER_DAY)
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("time out of range")));

	result->zone = pq_getmsgint(buf, sizeof(result->zone));

	/* Check for sane GMT displacement; see notes in datatype/timestamp.h */
	if (result->zone <= -TZDISP_LIMIT || result->zone >= TZDISP_LIMIT)
		ereport(ERROR,
				(errcode(ERRCODE_INVALID_TIME_ZONE_DISPLACEMENT_VALUE),
				 errmsg("time zone displacement out of range")));

	AdjustTimeForTypmod(&(result->time), typmod);

	PG_RETURN_TIMETZADT_P(result);
}

/*
 *		timetz_send			- converts timetz to binary format
 */
Datum
timetz_send(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time = PG_GETARG_TIMETZADT_P(0);
	StringInfoData buf;

	pq_begintypsend(&buf);
	pq_sendint64(&buf, time->time);
	pq_sendint32(&buf, time->zone);
	PG_RETURN_BYTEA_P(pq_endtypsend(&buf));
}

Datum
timetztypmodin(PG_FUNCTION_ARGS)
{
	ArrayType  *ta = PG_GETARG_ARRAYTYPE_P(0);

	PG_RETURN_INT32(anytime_typmodin(true, ta));
}

Datum
timetztypmodout(PG_FUNCTION_ARGS)
{
	int32		typmod = PG_GETARG_INT32(0);

	PG_RETURN_CSTRING(anytime_typmodout(true, typmod));
}


/* timetz2tm()
 * Convert TIME WITH TIME ZONE data type to POSIX time structure.
 */
int
timetz2tm(TimeTzADT *time, struct pg_tm *tm, fsec_t *fsec, int *tzp)
{
	TimeOffset	trem = time->time;

	tm->tm_hour = trem / USECS_PER_HOUR;
	trem -= tm->tm_hour * USECS_PER_HOUR;
	tm->tm_min = trem / USECS_PER_MINUTE;
	trem -= tm->tm_min * USECS_PER_MINUTE;
	tm->tm_sec = trem / USECS_PER_SEC;
	*fsec = trem - tm->tm_sec * USECS_PER_SEC;

	if (tzp != NULL)
		*tzp = time->zone;

	return 0;
}

/* timetz_scale()
 * Adjust time type for specified scale factor.
 * Used by PostgreSQL type system to stuff columns.
 */
Datum
timetz_scale(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time = PG_GETARG_TIMETZADT_P(0);
	int32		typmod = PG_GETARG_INT32(1);
	TimeTzADT  *result;

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));

	result->time = time->time;
	result->zone = time->zone;

	AdjustTimeForTypmod(&(result->time), typmod);

	PG_RETURN_TIMETZADT_P(result);
}


static int
timetz_cmp_internal(TimeTzADT *time1, TimeTzADT *time2)
{
	TimeOffset	t1,
				t2;

	/* Primary sort is by true (GMT-equivalent) time */
	t1 = time1->time + (time1->zone * USECS_PER_SEC);
	t2 = time2->time + (time2->zone * USECS_PER_SEC);

	if (t1 > t2)
		return 1;
	if (t1 < t2)
		return -1;

	/*
	 * If same GMT time, sort by timezone; we only want to say that two
	 * timetz's are equal if both the time and zone parts are equal.
	 */
	if (time1->zone > time2->zone)
		return 1;
	if (time1->zone < time2->zone)
		return -1;

	return 0;
}

Datum
timetz_eq(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time1 = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *time2 = PG_GETARG_TIMETZADT_P(1);

	PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) == 0);
}

Datum
timetz_ne(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time1 = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *time2 = PG_GETARG_TIMETZADT_P(1);

	PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) != 0);
}

Datum
timetz_lt(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time1 = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *time2 = PG_GETARG_TIMETZADT_P(1);

	PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) < 0);
}

Datum
timetz_le(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time1 = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *time2 = PG_GETARG_TIMETZADT_P(1);

	PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) <= 0);
}

Datum
timetz_gt(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time1 = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *time2 = PG_GETARG_TIMETZADT_P(1);

	PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) > 0);
}

Datum
timetz_ge(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time1 = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *time2 = PG_GETARG_TIMETZADT_P(1);

	PG_RETURN_BOOL(timetz_cmp_internal(time1, time2) >= 0);
}

Datum
timetz_cmp(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time1 = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *time2 = PG_GETARG_TIMETZADT_P(1);

	PG_RETURN_INT32(timetz_cmp_internal(time1, time2));
}

Datum
timetz_hash(PG_FUNCTION_ARGS)
{
	TimeTzADT  *key = PG_GETARG_TIMETZADT_P(0);
	uint32		thash;

	/*
	 * To avoid any problems with padding bytes in the struct, we figure the
	 * field hashes separately and XOR them.
	 */
	thash = DatumGetUInt32(DirectFunctionCall1(hashint8,
											   Int64GetDatumFast(key->time)));
	thash ^= DatumGetUInt32(hash_uint32(key->zone));
	PG_RETURN_UINT32(thash);
}

Datum
timetz_hash_extended(PG_FUNCTION_ARGS)
{
	TimeTzADT  *key = PG_GETARG_TIMETZADT_P(0);
	Datum		seed = PG_GETARG_DATUM(1);
	uint64		thash;

	/* Same approach as timetz_hash */
	thash = DatumGetUInt64(DirectFunctionCall2(hashint8extended,
											   Int64GetDatumFast(key->time),
											   seed));
	thash ^= DatumGetUInt64(hash_uint32_extended(key->zone,
												 DatumGetInt64(seed)));
	PG_RETURN_UINT64(thash);
}

Datum
timetz_larger(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time1 = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *time2 = PG_GETARG_TIMETZADT_P(1);
	TimeTzADT  *result;

	if (timetz_cmp_internal(time1, time2) > 0)
		result = time1;
	else
		result = time2;
	PG_RETURN_TIMETZADT_P(result);
}

Datum
timetz_smaller(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time1 = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *time2 = PG_GETARG_TIMETZADT_P(1);
	TimeTzADT  *result;

	if (timetz_cmp_internal(time1, time2) < 0)
		result = time1;
	else
		result = time2;
	PG_RETURN_TIMETZADT_P(result);
}

/* timetz_pl_interval()
 * Add interval to timetz.
 */
Datum
timetz_pl_interval(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time = PG_GETARG_TIMETZADT_P(0);
	Interval   *span = PG_GETARG_INTERVAL_P(1);
	TimeTzADT  *result;

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));

	result->time = time->time + span->time;
	result->time -= result->time / USECS_PER_DAY * USECS_PER_DAY;
	if (result->time < INT64CONST(0))
		result->time += USECS_PER_DAY;

	result->zone = time->zone;

	PG_RETURN_TIMETZADT_P(result);
}

/* timetz_mi_interval()
 * Subtract interval from timetz.
 */
Datum
timetz_mi_interval(PG_FUNCTION_ARGS)
{
	TimeTzADT  *time = PG_GETARG_TIMETZADT_P(0);
	Interval   *span = PG_GETARG_INTERVAL_P(1);
	TimeTzADT  *result;

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));

	result->time = time->time - span->time;
	result->time -= result->time / USECS_PER_DAY * USECS_PER_DAY;
	if (result->time < INT64CONST(0))
		result->time += USECS_PER_DAY;

	result->zone = time->zone;

	PG_RETURN_TIMETZADT_P(result);
}

/*
 * in_range support function for timetz.
 */
Datum
in_range_timetz_interval(PG_FUNCTION_ARGS)
{
	TimeTzADT  *val = PG_GETARG_TIMETZADT_P(0);
	TimeTzADT  *base = PG_GETARG_TIMETZADT_P(1);
	Interval   *offset = PG_GETARG_INTERVAL_P(2);
	bool		sub = PG_GETARG_BOOL(3);
	bool		less = PG_GETARG_BOOL(4);
	TimeTzADT	sum;

	/*
	 * Like timetz_pl_interval/timetz_mi_interval, we disregard the month and
	 * day fields of the offset.  So our test for negative should too.
	 */
	if (offset->time < 0)
		ereport(ERROR,
				(errcode(ERRCODE_INVALID_PRECEDING_OR_FOLLOWING_SIZE),
				 errmsg("invalid preceding or following size in window function")));

	/*
	 * We can't use timetz_pl_interval/timetz_mi_interval here, because their
	 * wraparound behavior would give wrong (or at least undesirable) answers.
	 * Fortunately the equivalent non-wrapping behavior is trivial, especially
	 * since we don't worry about integer overflow.
	 */
	if (sub)
		sum.time = base->time - offset->time;
	else
		sum.time = base->time + offset->time;
	sum.zone = base->zone;

	if (less)
		PG_RETURN_BOOL(timetz_cmp_internal(val, &sum) <= 0);
	else
		PG_RETURN_BOOL(timetz_cmp_internal(val, &sum) >= 0);
}

/* overlaps_timetz() --- implements the SQL OVERLAPS operator.
 *
 * Algorithm is per SQL spec.  This is much harder than you'd think
 * because the spec requires us to deliver a non-null answer in some cases
 * where some of the inputs are null.
 */
Datum
overlaps_timetz(PG_FUNCTION_ARGS)
{
	/*
	 * The arguments are TimeTzADT *, but we leave them as generic Datums for
	 * convenience of notation --- and to avoid dereferencing nulls.
	 */
	Datum		ts1 = PG_GETARG_DATUM(0);
	Datum		te1 = PG_GETARG_DATUM(1);
	Datum		ts2 = PG_GETARG_DATUM(2);
	Datum		te2 = PG_GETARG_DATUM(3);
	bool		ts1IsNull = PG_ARGISNULL(0);
	bool		te1IsNull = PG_ARGISNULL(1);
	bool		ts2IsNull = PG_ARGISNULL(2);
	bool		te2IsNull = PG_ARGISNULL(3);

#define TIMETZ_GT(t1,t2) \
	DatumGetBool(DirectFunctionCall2(timetz_gt,t1,t2))
#define TIMETZ_LT(t1,t2) \
	DatumGetBool(DirectFunctionCall2(timetz_lt,t1,t2))

	/*
	 * If both endpoints of interval 1 are null, the result is null (unknown).
	 * If just one endpoint is null, take ts1 as the non-null one. Otherwise,
	 * take ts1 as the lesser endpoint.
	 */
	if (ts1IsNull)
	{
		if (te1IsNull)
			PG_RETURN_NULL();
		/* swap null for non-null */
		ts1 = te1;
		te1IsNull = true;
	}
	else if (!te1IsNull)
	{
		if (TIMETZ_GT(ts1, te1))
		{
			Datum		tt = ts1;

			ts1 = te1;
			te1 = tt;
		}
	}

	/* Likewise for interval 2. */
	if (ts2IsNull)
	{
		if (te2IsNull)
			PG_RETURN_NULL();
		/* swap null for non-null */
		ts2 = te2;
		te2IsNull = true;
	}
	else if (!te2IsNull)
	{
		if (TIMETZ_GT(ts2, te2))
		{
			Datum		tt = ts2;

			ts2 = te2;
			te2 = tt;
		}
	}

	/*
	 * At this point neither ts1 nor ts2 is null, so we can consider three
	 * cases: ts1 > ts2, ts1 < ts2, ts1 = ts2
	 */
	if (TIMETZ_GT(ts1, ts2))
	{
		/*
		 * This case is ts1 < te2 OR te1 < te2, which may look redundant but
		 * in the presence of nulls it's not quite completely so.
		 */
		if (te2IsNull)
			PG_RETURN_NULL();
		if (TIMETZ_LT(ts1, te2))
			PG_RETURN_BOOL(true);
		if (te1IsNull)
			PG_RETURN_NULL();

		/*
		 * If te1 is not null then we had ts1 <= te1 above, and we just found
		 * ts1 >= te2, hence te1 >= te2.
		 */
		PG_RETURN_BOOL(false);
	}
	else if (TIMETZ_LT(ts1, ts2))
	{
		/* This case is ts2 < te1 OR te2 < te1 */
		if (te1IsNull)
			PG_RETURN_NULL();
		if (TIMETZ_LT(ts2, te1))
			PG_RETURN_BOOL(true);
		if (te2IsNull)
			PG_RETURN_NULL();

		/*
		 * If te2 is not null then we had ts2 <= te2 above, and we just found
		 * ts2 >= te1, hence te2 >= te1.
		 */
		PG_RETURN_BOOL(false);
	}
	else
	{
		/*
		 * For ts1 = ts2 the spec says te1 <> te2 OR te1 = te2, which is a
		 * rather silly way of saying "true if both are nonnull, else null".
		 */
		if (te1IsNull || te2IsNull)
			PG_RETURN_NULL();
		PG_RETURN_BOOL(true);
	}

#undef TIMETZ_GT
#undef TIMETZ_LT
}


Datum
timetz_time(PG_FUNCTION_ARGS)
{
	TimeTzADT  *timetz = PG_GETARG_TIMETZADT_P(0);
	TimeADT		result;

	/* swallow the time zone and just return the time */
	result = timetz->time;

	PG_RETURN_TIMEADT(result);
}


Datum
time_timetz(PG_FUNCTION_ARGS)
{
	TimeADT		time = PG_GETARG_TIMEADT(0);
	TimeTzADT  *result;
	struct pg_tm tt,
			   *tm = &tt;
	fsec_t		fsec;
	int			tz;

	GetCurrentDateTime(tm);
	time2tm(time, tm, &fsec);
	tz = DetermineTimeZoneOffset(tm, session_timezone);

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));

	result->time = time;
	result->zone = tz;

	PG_RETURN_TIMETZADT_P(result);
}


/* timestamptz_timetz()
 * Convert timestamp to timetz data type.
 */
Datum
timestamptz_timetz(PG_FUNCTION_ARGS)
{
	TimestampTz timestamp = PG_GETARG_TIMESTAMP(0);
	TimeTzADT  *result;
	struct pg_tm tt,
			   *tm = &tt;
	int			tz;
	fsec_t		fsec;

	if (TIMESTAMP_NOT_FINITE(timestamp))
		PG_RETURN_NULL();

	if (timestamp2tm(timestamp, &tz, tm, &fsec, NULL, NULL) != 0)
		ereport(ERROR,
				(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
				 errmsg("timestamp out of range")));

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));

	tm2timetz(tm, fsec, tz, result);

	PG_RETURN_TIMETZADT_P(result);
}


/* datetimetz_timestamptz()
 * Convert date and timetz to timestamp with time zone data type.
 * Timestamp is stored in GMT, so add the time zone
 * stored with the timetz to the result.
 * - thomas 2000-03-10
 */
Datum
datetimetz_timestamptz(PG_FUNCTION_ARGS)
{
	DateADT		date = PG_GETARG_DATEADT(0);
	TimeTzADT  *time = PG_GETARG_TIMETZADT_P(1);
	TimestampTz result;

	if (DATE_IS_NOBEGIN(date))
		TIMESTAMP_NOBEGIN(result);
	else if (DATE_IS_NOEND(date))
		TIMESTAMP_NOEND(result);
	else
	{
		/*
		 * Date's range is wider than timestamp's, so check for boundaries.
		 * Since dates have the same minimum values as timestamps, only upper
		 * boundary need be checked for overflow.
		 */
		if (date >= (TIMESTAMP_END_JULIAN - POSTGRES_EPOCH_JDATE))
			ereport(ERROR,
					(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
					 errmsg("date out of range for timestamp")));
		result = date * USECS_PER_DAY + time->time + time->zone * USECS_PER_SEC;

		/*
		 * Since it is possible to go beyond allowed timestamptz range because
		 * of time zone, check for allowed timestamp range after adding tz.
		 */
		if (!IS_VALID_TIMESTAMP(result))
			ereport(ERROR,
					(errcode(ERRCODE_DATETIME_VALUE_OUT_OF_RANGE),
					 errmsg("date out of range for timestamp")));
	}

	PG_RETURN_TIMESTAMP(result);
}


/* timetz_part()
 * Extract specified field from time type.
 */
Datum
timetz_part(PG_FUNCTION_ARGS)
{
	text	   *units = PG_GETARG_TEXT_PP(0);
	TimeTzADT  *time = PG_GETARG_TIMETZADT_P(1);
	float8		result;
	int			type,
				val;
	char	   *lowunits;

	lowunits = downcase_truncate_identifier(VARDATA_ANY(units),
											VARSIZE_ANY_EXHDR(units),
											false);

	type = DecodeUnits(0, lowunits, &val);
	if (type == UNKNOWN_FIELD)
		type = DecodeSpecial(0, lowunits, &val);

	if (type == UNITS)
	{
		double		dummy;
		int			tz;
		fsec_t		fsec;
		struct pg_tm tt,
				   *tm = &tt;

		timetz2tm(time, tm, &fsec, &tz);

		switch (val)
		{
			case DTK_TZ:
				result = -tz;
				break;

			case DTK_TZ_MINUTE:
				result = -tz;
				result /= SECS_PER_MINUTE;
				FMODULO(result, dummy, (double) SECS_PER_MINUTE);
				break;

			case DTK_TZ_HOUR:
				dummy = -tz;
				FMODULO(dummy, result, (double) SECS_PER_HOUR);
				break;

			case DTK_MICROSEC:
				result = tm->tm_sec * 1000000.0 + fsec;
				break;

			case DTK_MILLISEC:
				result = tm->tm_sec * 1000.0 + fsec / 1000.0;
				break;

			case DTK_SECOND:
				result = tm->tm_sec + fsec / 1000000.0;
				break;

			case DTK_MINUTE:
				result = tm->tm_min;
				break;

			case DTK_HOUR:
				result = tm->tm_hour;
				break;

			case DTK_DAY:
			case DTK_MONTH:
			case DTK_QUARTER:
			case DTK_YEAR:
			case DTK_DECADE:
			case DTK_CENTURY:
			case DTK_MILLENNIUM:
			default:
				ereport(ERROR,
						(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
						 errmsg("\"time with time zone\" units \"%s\" not recognized",
								lowunits)));
				result = 0;
		}
	}
	else if (type == RESERV && val == DTK_EPOCH)
	{
		result = time->time / 1000000.0 + time->zone;
	}
	else
	{
		ereport(ERROR,
				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
				 errmsg("\"time with time zone\" units \"%s\" not recognized",
						lowunits)));
		result = 0;
	}

	PG_RETURN_FLOAT8(result);
}

/* timetz_zone()
 * Encode time with time zone type with specified time zone.
 * Applies DST rules as of the current date.
 */
Datum
timetz_zone(PG_FUNCTION_ARGS)
{
	text	   *zone = PG_GETARG_TEXT_PP(0);
	TimeTzADT  *t = PG_GETARG_TIMETZADT_P(1);
	TimeTzADT  *result;
	int			tz;
	char		tzname[TZ_STRLEN_MAX + 1];
	char	   *lowzone;
	int			type,
				val;
	pg_tz	   *tzp;

	/*
	 * Look up the requested timezone.  First we look in the timezone
	 * abbreviation table (to handle cases like "EST"), and if that fails, we
	 * look in the timezone database (to handle cases like
	 * "America/New_York").  (This matches the order in which timestamp input
	 * checks the cases; it's important because the timezone database unwisely
	 * uses a few zone names that are identical to offset abbreviations.)
	 */
	text_to_cstring_buffer(zone, tzname, sizeof(tzname));

	/* DecodeTimezoneAbbrev requires lowercase input */
	lowzone = downcase_truncate_identifier(tzname,
										   strlen(tzname),
										   false);

	type = DecodeTimezoneAbbrev(0, lowzone, &val, &tzp);

	if (type == TZ || type == DTZ)
	{
		/* fixed-offset abbreviation */
		tz = -val;
	}
	else if (type == DYNTZ)
	{
		/* dynamic-offset abbreviation, resolve using current time */
		pg_time_t	now = (pg_time_t) time(NULL);
		struct pg_tm *tm;

		tm = pg_localtime(&now, tzp);
		tz = DetermineTimeZoneAbbrevOffset(tm, tzname, tzp);
	}
	else
	{
		/* try it as a full zone name */
		tzp = pg_tzset(tzname);
		if (tzp)
		{
			/* Get the offset-from-GMT that is valid today for the zone */
			pg_time_t	now = (pg_time_t) time(NULL);
			struct pg_tm *tm;

			tm = pg_localtime(&now, tzp);
			tz = -tm->tm_gmtoff;
		}
		else
		{
			ereport(ERROR,
					(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
					 errmsg("time zone \"%s\" not recognized", tzname)));
			tz = 0;				/* keep compiler quiet */
		}
	}

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));

	result->time = t->time + (t->zone - tz) * USECS_PER_SEC;
	while (result->time < INT64CONST(0))
		result->time += USECS_PER_DAY;
	while (result->time >= USECS_PER_DAY)
		result->time -= USECS_PER_DAY;

	result->zone = tz;

	PG_RETURN_TIMETZADT_P(result);
}

/* timetz_izone()
 * Encode time with time zone type with specified time interval as time zone.
 */
Datum
timetz_izone(PG_FUNCTION_ARGS)
{
	Interval   *zone = PG_GETARG_INTERVAL_P(0);
	TimeTzADT  *time = PG_GETARG_TIMETZADT_P(1);
	TimeTzADT  *result;
	int			tz;

	if (zone->month != 0 || zone->day != 0)
		ereport(ERROR,
				(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
				 errmsg("interval time zone \"%s\" must not include months or days",
						DatumGetCString(DirectFunctionCall1(interval_out,
															PointerGetDatum(zone))))));

	tz = -(zone->time / USECS_PER_SEC);

	result = (TimeTzADT *) palloc(sizeof(TimeTzADT));

	result->time = time->time + (time->zone - tz) * USECS_PER_SEC;
	while (result->time < INT64CONST(0))
		result->time += USECS_PER_DAY;
	while (result->time >= USECS_PER_DAY)
		result->time -= USECS_PER_DAY;

	result->zone = tz;

	PG_RETURN_TIMETZADT_P(result);
}