<-
Apache > HTTP Server > Documentation > Version 2.5 > Modules

Apache Module mod_remoteip

Available Languages:  en  |  fr 

Description:Replaces the original client IP address for the connection with the useragent IP address list presented by a proxies or a load balancer via the request headers.
Status:Base
Module Identifier:remoteip_module
Source File:mod_remoteip.c

Summary

This module is used to treat the useragent which initiated the request as the originating useragent as identified by httpd for the purposes of authorization and logging, even where that useragent is behind a load balancer, front end server, or proxy server.

The module overrides the client IP address for the connection with the useragent IP address reported in the request header configured with the RemoteIPHeader directive.

Additionally, this module implements the server side of HAProxy's PROXY Protocol when using the RemoteIPProxyProtocol directive.

Once replaced as instructed, this overridden useragent IP address is then used for the mod_authz_host Require ip feature, is reported by mod_status, and is recorded by mod_log_config %a and core %a format strings. The underlying client IP of the connection is available in the %{c}a format string.

It is critical to only enable this behavior from intermediate hosts (proxies, etc) which are trusted by this server, since it is trivial for the remote useragent to impersonate another useragent.

Topics

Directives

Bugfix checklist

See also

top

Remote IP Processing

Apache by default identifies the useragent with the connection's client_ip value, and the connection remote_host and remote_logname are derived from this value. These fields play a role in authentication, authorization and logging and other purposes by other loadable modules.

mod_remoteip overrides the client IP of the connection with the advertised useragent IP as provided by a proxy or load balancer, for the duration of the request. A load balancer might establish a long lived keepalive connection with the server, and each request will have the correct useragent IP, even though the underlying client IP address of the load balancer remains unchanged.

When multiple, comma delimited useragent IP addresses are listed in the header value, they are processed in Right-to-Left order. Processing halts when a given useragent IP address is not trusted to present the preceding IP address. The header field is updated to this remaining list of unconfirmed IP addresses, or if all IP addresses were trusted, this header is removed from the request altogether.

In overriding the client IP, the module stores the list of intermediate hosts in a remoteip-proxy-ip-list note, which mod_log_config can record using the %{remoteip-proxy-ip-list}n format token. If the administrator needs to store this as an additional header, this same value can also be recording as a header using the directive RemoteIPProxiesHeader.

IPv4-over-IPv6 Mapped Addresses

As with httpd in general, any IPv4-over-IPv6 mapped addresses are recorded in their IPv4 representation.

Internal (Private) Addresses

All internal addresses 10/8, 172.16/12, 192.168/16, 169.254/16 and 127/8 blocks (and IPv6 addresses outside of the public 2000::/3 block) are only evaluated by mod_remoteip when RemoteIPInternalProxy internal (intranet) proxies are registered.
top

RemoteIPHeader Directive

Description:Declare the header field which should be parsed for useragent IP addresses
Syntax:RemoteIPHeader header-field
Context:server config, virtual host
Status:Base
Module:mod_remoteip

The RemoteIPHeader directive triggers mod_remoteip to treat the value of the specified header-field header as the useragent IP address, or list of intermediate useragent IP addresses, subject to further configuration of the RemoteIPInternalProxy and RemoteIPTrustedProxy directives.

Unless these other directives are used, mod_remoteip will trust all hosts presenting a non internal address in the RemoteIPHeader header value.

Internal (Load Balancer) Example

RemoteIPHeader X-Client-IP

Proxy Example

RemoteIPHeader X-Forwarded-For
top

RemoteIPInternalProxy Directive

Description:Declare client intranet IP addresses trusted to present the RemoteIPHeader value
Syntax:RemoteIPInternalProxy proxy-ip|proxy-ip/subnet|hostname ...
Context:server config, virtual host
Status:Base
Module:mod_remoteip

The RemoteIPInternalProxy directive adds one or more addresses (or address blocks) to trust as presenting a valid RemoteIPHeader value of the useragent IP. Unlike the RemoteIPTrustedProxy directive, any IP address presented in this header, including private intranet addresses, are trusted when passed from these proxies.

Internal (Load Balancer) Example

RemoteIPHeader X-Client-IP
RemoteIPInternalProxy 10.0.2.0/24
RemoteIPInternalProxy gateway.localdomain
top

RemoteIPInternalProxyList Directive

Description:Declare client intranet IP addresses trusted to present the RemoteIPHeader value
Syntax:RemoteIPInternalProxyList filename
Context:server config, virtual host
Status:Base
Module:mod_remoteip

The RemoteIPInternalProxyList directive specifies a file parsed at startup, and builds a list of addresses (or address blocks) to trust as presenting a valid RemoteIPHeader value of the useragent IP.

The '#' hash character designates a comment line, otherwise each whitespace or newline separated entry is processed identically to the RemoteIPInternalProxy directive.

Internal (Load Balancer) Example

RemoteIPHeader X-Client-IP
RemoteIPInternalProxyList conf/trusted-proxies.lst

conf/trusted-proxies.lst contents

# Our internally trusted proxies;
10.0.2.0/24         #Everyone in the testing group
gateway.localdomain #The front end balancer
top

RemoteIPProxiesHeader Directive

Description:Declare the header field which will record all intermediate IP addresses
Syntax:RemoteIPProxiesHeader HeaderFieldName
Context:server config, virtual host
Status:Base
Module:mod_remoteip

The RemoteIPProxiesHeader directive specifies a header into which mod_remoteip will collect a list of all of the intermediate client IP addresses trusted to resolve the useragent IP of the request. Note that intermediate RemoteIPTrustedProxy addresses are recorded in this header, while any intermediate RemoteIPInternalProxy addresses are discarded.

Example

RemoteIPHeader X-Forwarded-For
RemoteIPProxiesHeader X-Forwarded-By
top

RemoteIPProxyProtocol Directive

Description:Enable or disable PROXY protocol handling
Syntax:RemoteIPProxyProtocol On|Off
Context:server config, virtual host
Status:Base
Module:mod_remoteip
Compatibility:RemoteIPProxyProtocol is only available in httpd 2.4.26 and newer

The RemoteIPProxyProtocol directive enables or disables the reading and handling of the PROXY protocol connection header. If enabled with the On flag, the upstream client must send the header every time it opens a connection or the connection will be aborted unless it is in the list of disabled hosts provided by RemoteIPProxyProtocolExceptions directive.

While this directive may be specified in any virtual host, it is important to understand that because the PROXY protocol is connection based and protocol agnostic, the enabling and disabling is actually based on ip-address and port. This means that if you have multiple name-based virtual hosts for the same host and port, and you enable it any one of them, then it is enabled for all them (with that host and port). It also means that if you attempt to enable the PROXY protocol in one and disable in the other, that won't work; in such a case the last one wins and a notice will be logged indicating which setting was being overridden.

Listen 80
<VirtualHost *:80>
    ServerName www.example.com
    RemoteIPProxyProtocol On

    #Requests to this virtual host must have a PROXY protocol
    # header provided. If it is missing, the connection will
    # be aborted
</VirtualHost>

Listen 8080
<VirtualHost *:8080>
    ServerName www.example.com
    RemoteIPProxyProtocol On
    RemoteIPProxyProtocolExceptions 127.0.0.1 10.0.0.0/8

    #Requests to this virtual host must have a PROXY protocol
    # header provided. If it is missing, the connection will
    # be aborted except when coming from localhost or the
    # 10.x.x.x RFC1918 range
</VirtualHost>
top

RemoteIPProxyProtocolExceptions Directive

Description:Disable processing of PROXY header for certain hosts or networks
Syntax:RemoteIPProxyProtocolExceptions host|range [host|range] [host|range]
Context:server config, virtual host
Status:Base
Module:mod_remoteip
Compatibility:RemoteIPProxyProtocolExceptions is only available in httpd 2.4.26 and newer

The RemoteIPProxyProtocol directive enables or disables the reading and handling of the PROXY protocol connection header. Sometimes it is desirable to require clients to provide the PROXY header, but permit other clients to connect without it. This directive allows a server administrator to configure a single host or CIDR range of hosts that may do so.

top

RemoteIPTrustedProxy Directive

Description:Restrict client IP addresses trusted to present the RemoteIPHeader value
Syntax:RemoteIPTrustedProxy proxy-ip|proxy-ip/subnet|hostname ...
Context:server config, virtual host
Status:Base
Module:mod_remoteip

The RemoteIPTrustedProxy directive restricts which peer IP addresses (or address blocks) will be trusted to present a valid RemoteIPHeader value of the useragent IP.

Unlike the RemoteIPInternalProxy directive, any intranet or private IP address reported by such proxies, including the 10/8, 172.16/12, 192.168/16, 169.254/16 and 127/8 blocks (or outside of the IPv6 public 2000::/3 block) are not trusted as the useragent IP, and are left in the RemoteIPHeader header's value.

By default, mod_remoteip will trust all hosts presenting a non internal address in the RemoteIPHeader header value.

Trusted (Load Balancer) Example

RemoteIPHeader X-Forwarded-For
RemoteIPTrustedProxy 10.0.2.16/28
RemoteIPTrustedProxy proxy.example.com
top

RemoteIPTrustedProxyList Directive

Description:Restrict client IP addresses trusted to present the RemoteIPHeader value
Syntax:RemoteIPTrustedProxyList filename
Context:server config, virtual host
Status:Base
Module:mod_remoteip

The RemoteIPTrustedProxyList directive specifies a file parsed at startup, and builds a list of addresses (or address blocks) to trust as presenting a valid RemoteIPHeader value of the useragent IP.

The '#' hash character designates a comment line, otherwise each whitespace or newline separated entry is processed identically to the RemoteIPTrustedProxy directive.

Trusted (Load Balancer) Example

RemoteIPHeader X-Forwarded-For
RemoteIPTrustedProxyList conf/trusted-proxies.lst

conf/trusted-proxies.lst contents

# Identified external proxies;
192.0.2.16/28 #wap phone group of proxies
proxy.isp.example.com #some well known ISP

Available Languages:  en  |  fr 

top

Comments

Notice:
This is not a Q&A section. Comments placed here should be pointed towards suggestions on improving the documentation or server, and may be removed again by our moderators if they are either implemented or considered invalid/off-topic. Questions on how to manage the Apache HTTP Server should be directed at either our IRC channel, #httpd, on Freenode, or sent to our mailing lists.