# Getting Started This tutorial is a step-by-step introduction to installing Icinga 2 and available Icinga web interfaces. It assumes that you are familiar with the system you're installing Icinga 2 on. Details on troubleshooting problems can be found [here](#troubleshooting). ## Setting up Icinga 2 First off you will have to install Icinga 2. The preferred way of doing this is to use the official package repositories depending on which operating system and distribution you are running. Distribution | Repository ------------------------|--------------------------- Debian | [Upstream](https://packages.debian.org/sid/icinga2), [DebMon](http://debmon.org/packages/debmon-wheezy/icinga2), [Icinga Repository](http://packages.icinga.org/debian/) Ubuntu | [Upstream](https://launchpad.net/ubuntu/+source/icinga2), [Icinga PPA](https://launchpad.net/~formorer/+archive/ubuntu/icinga), [Icinga Repository](http://packages.icinga.org/ubuntu/) RHEL/CentOS | [Icinga Repository](http://packages.icinga.org/epel/) OpenSUSE | [Icinga Repository](http://packages.icinga.org/openSUSE/), [Server Monitoring Repository](https://build.opensuse.org/package/show/server:monitoring/icinga2) SLES | [Icinga Repository](http://packages.icinga.org/SUSE/) Gentoo | [Upstream](http://packages.gentoo.org/package/net-analyzer/icinga2) FreeBSD | [Upstream](http://www.freshports.org/net-mgmt/icinga2) ArchLinux | [Upstream](https://aur.archlinux.org/packages/icinga2) Packages for distributions other than the ones listed above may also be available. Please contact your distribution packagers. ### Installing Requirements for Icinga 2 You need to add the Icinga repository to your package management configuration. Below is a list with examples for the various distributions. Debian (debmon): # wget -O - http://debmon.org/debmon/repo.key 2>/dev/null | apt-key add - # cat >/etc/apt/sources.list.d/debmon.list< Installing Icinga 2 You can install Icinga 2 by using your distribution's package manager to install the `icinga2` package. Debian/Ubuntu: # apt-get install icinga2 RHEL/CentOS/Fedora: # yum install icinga2 SLES/OpenSUSE: # zypper install icinga2 On RHEL/CentOS and SLES you will need to use `chkconfig` to enable the `icinga2` service. You can manually start Icinga 2 using `service icinga2 start`. # chkconfig icinga2 on # service icinga2 start RHEL/CentOS 7 use [Systemd](#systemd-service) with `systemctl {enable,start} icinga2`. # systemctl enable icinga2 # systemctl start icinga2 Some parts of Icinga 2's functionality are available as separate packages: Name | Description ------------------------|-------------------------------- icinga2-ido-mysql | [DB IDO](#configuring-db-ido) provider module for MySQL icinga2-ido-pgsql | [DB IDO](#configuring-db-ido) provider module for PostgreSQL If you're running a distribution for which Icinga 2 packages are not yet available you will need to use the release tarball which you can download from the [Icinga website](https://www.icinga.org/). The release tarballs contain an `INSTALL` file with further instructions. ### Enabled Features during Installation The default installation will enable three features required for a basic Icinga 2 installation: * `checker` for executing checks * `notification` for sending notifications * `mainlog` for writing the `icinga2.log` file You can verify that by calling `icinga2 feature list` [cli command](#cli-command-feature) to see which features are enabled and disabled. # icinga2 feature list Disabled features: api command compatlog debuglog graphite icingastatus ido-mysql ido-pgsql livestatus notification perfdata statusdata syslog Enabled features: checker mainlog notification ### Installation Paths By default Icinga 2 uses the following files and directories: Path | Description ------------------------------------|------------------------------------ /etc/icinga2 | Contains Icinga 2 configuration files. /etc/init.d/icinga2 | The Icinga 2 init script. /usr/sbin/icinga2* | The Icinga 2 binary. /usr/share/doc/icinga2 | Documentation files that come with Icinga 2. /usr/share/icinga2/include | The Icinga Template Library and plugin command configuration. /var/run/icinga2 | PID file. /var/run/icinga2/cmd | Command pipe and Livestatus socket. /var/cache/icinga2 | status.dat/objects.cache, icinga2.debug files /var/spool/icinga2 | Used for performance data spool files. /var/lib/icinga2 | Icinga 2 state file, cluster log, local CA and configuration files. /var/log/icinga2 | Log file location and compat/ directory for the CompatLogger feature. ## Setting up Check Plugins Without plugins Icinga 2 does not know how to check external services. The [Monitoring Plugins Project](https://www.monitoring-plugins.org/) provides an extensive set of plugins which can be used with Icinga 2 to check whether services are working properly. The recommended way of installing these standard plugins is to use your distribution's package manager. > **Note** > > The `Nagios Plugins` project was renamed to `Monitoring Plugins` > in January 2014. At the time of this writing some packages are still > using the old name while some distributions have adopted the new package > name `monitoring-plugins` already. > **Note** > > EPEL for RHEL/CentOS 7 is still in beta mode at the time of writing and does > not provide a `monitoring-plugins` package. You are required to manually install > them. For your convenience here is a list of package names for some of the more popular operating systems/distributions: OS/Distribution | Package Name | Installation Path -----------------------|--------------------|--------------------------- RHEL/CentOS (EPEL) | nagios-plugins-all | /usr/lib/nagios/plugins or /usr/lib64/nagios/plugins Debian | nagios-plugins | /usr/lib/nagios/plugins FreeBSD | nagios-plugins | /usr/local/libexec/nagios OS X (MacPorts) | nagios-plugins | /opt/local/libexec Depending on which directory your plugins are installed into you may need to update the global `PluginDir` constant in your Icinga 2 configuration. This macro is used by the service templates contained in the Icinga Template Library to determine where to find the plugin binaries. ### Integrate Additional Plugins For some services you may need additional 'check plugins' which are not provided by the official Monitoring Plugins project. All existing Nagios or Icinga 1.x plugins work with Icinga 2. Here's a list of popular community sites which host check plugins: * [Icinga Exchange](https://exchange.icinga.org) * [Icinga Wiki](https://wiki.icinga.org) The recommended way of setting up these plugins is to copy them to a common directory and create an extra global constant, e.g. `CustomPluginDir` in your [constants.conf](#constants-conf) configuration file: # cp check_snmp_int.pl /opt/plugins # chmod +x /opt/plugins/check_snmp_int.pl # cat /etc/icinga2/constants.conf /** * This file defines global constants which can be used in * the other configuration files. At a minimum the * PluginDir constant should be defined. */ const PluginDir = "/usr/lib/nagios/plugins" const CustomPluginDir = "/opt/monitoring" Prior to using the check plugin with Icinga 2 you should ensure that it is working properly by trying to run it on the console using whichever user Icinga 2 is running as: # su - icinga -s /bin/bash $ /opt/plugins/check_snmp_int.pl --help Additional libraries may be required for some plugins. Please consult the plugin documentation and/or plugin provided README for installation instructions. Sometimes plugins contain hard-coded paths to other components. Instead of changing the plugin it might be easier to create logical links which is (more) update-safe. Each plugin requires a [CheckCommand](#objecttype-checkcommand) object in your configuration which can be used in the [Service](#objecttype-service) or [Host](#objecttype-host) object definition. Examples for `CheckCommand` objects can be found in the [Plugin Check Commands](#plugin-check-commands) shipped with Icinga 2. For further information on your monitoring configuration read the [monitoring basics](#monitoring-basics). ## Configuring Icinga 2: First Steps ### icinga2.conf An example configuration file is installed for you in `/etc/icinga2/icinga2.conf`. Here's a brief description of the example configuration: /** * Icinga 2 configuration file * - this is where you define settings for the Icinga application including * which hosts/services to check. * * For an overview of all available configuration options please refer * to the documentation that is distributed as part of Icinga 2. */ Icinga 2 supports [C/C++-style comments](#comments). /** * The constants.conf defines global constants. */ include "constants.conf" The `include` directive can be used to include other files. /** * The zones.conf defines zones for a cluster setup. * Not required for single instance setups. */ include "zones.conf" /** * The Icinga Template Library (ITL) provides a number of useful templates * and command definitions. * Common monitoring plugin command definitions are included separately. */ include include /** * The features-available directory contains a number of configuration * files for features which can be enabled and disabled using the * icinga2 feature enable / icinga2 feature disable CLI commands. * These commands work by creating and removing symbolic links in * the features-enabled directory. */ include "features-enabled/*.conf" This `include` directive takes care of including the configuration files for all the features which have been enabled with `icinga2 feature enable`. See [Enabling/Disabling Features](#features) for more details. /** * Although in theory you could define all your objects in this file * the preferred way is to create separate directories and files in the conf.d * directory. Each of these files must have the file extension ".conf". */ include_recursive "conf.d" You can put your own configuration files in the `conf.d` directory. This directive makes sure that all of your own configuration files are included. ### constants.conf The `constants.conf` configuration file can be used to define global constants: /** * This file defines global constants which can be used in * the other configuration files. */ /* The directory which contains the plugins from the Monitoring Plugins project. */ const PluginDir = "/usr/lib/nagios/plugins" /* Our local instance name. This should be the common name from the API certificate */ const NodeName = "localhost" /* Our local zone name. */ const ZoneName = NodeName ### zones.conf The `zones.conf` configuration file can be used to configure `Endpoint` and `Zone` objects required for a [distributed zone setup](#distributed-monitoring-high-availability). By default a local dummy zone is defined based on the `NodeName` constant defined in [constants.conf](#constants-conf). > **Note** > > Not required for single instance installations. ### localhost.conf The `conf.d/hosts/localhost.conf` file contains our first host definition: /** * A host definition. You can create your own configuration files * in the conf.d directory (e.g. one per host). By default all *.conf * files in this directory are included. */ object Host "localhost" { import "generic-host" address = "127.0.0.1" address6 = "::1" vars.os = "Linux" vars.sla = "24x7" } This defines the host `localhost`. The `import` keyword is used to import the `generic-host` template which takes care of setting up the host check command to `hostalive`. If you require a different check command, you can override it in the object definition. The `vars` attribute can be used to define custom attributes which are available for check and notification commands. Most of the templates in the Icinga Template Library require an `address` attribute. The custom attribute `os` is evaluated by the `linux-servers` group in `groups.conf `making the host `localhost` a member. object HostGroup "linux-servers" { display_name = "Linux Servers" assign where host.vars.os == "Linux" } A host notification apply rule in `notifications.conf` checks for the custom attribute `sla` being set to `24x7` automatically applying a host notification. /** * The example notification apply rules. * * Only applied if host/service objects have * the custom attribute `sla` set to `24x7`. */ apply Notification "mail-icingaadmin" to Host { import "mail-host-notification" user_groups = [ "icingaadmins" ] assign where host.vars.sla == "24x7" } Now it's time to define services for the host object. Because these checks are only available for the `localhost` host, they are organized below `hosts/localhost/`. > **Tip** > > The directory tree and file organisation is just an example. You are > free to define your own strategy. Just keep in mind to include the > main directories in the [icinga2.conf](#icinga2-conf) file. object Service "disk" { import "generic-service" host_name = "localhost" check_command = "disk" vars.sla = "24x7" } object Service "http" { import "generic-service" host_name = "localhost" check_command = "http" vars.sla = "24x7" } object Service "load" { import "generic-service" host_name = "localhost" check_command = "load" vars.sla = "24x7" } object Service "procs" { import "generic-service" host_name = "localhost" check_command = "procs" vars.sla = "24x7" } object Service "ssh" { import "generic-service" host_name = "localhost" check_command = "ssh" vars.sla = "24x7" } object Service "swap" { import "generic-service" host_name = "localhost" check_command = "swap" vars.sla = "24x7" } object Service "users" { import "generic-service" host_name = "localhost" check_command = "users" vars.sla = "24x7" } object Service "icinga" { import "generic-service" host_name = "localhost" check_command = "icinga" vars.sla = "24x7" } The command object `icinga` for the embedded health check is provided by the [Icinga Template Library (ITL)](#itl) while `http_ip`, `ssh`, `load`, `processes`, `users` and `disk` are all provided by the plugin check commands which we enabled earlier by including the `itl` and `plugins` configuration file. The Debian packages also ship an additional `apt` service check. > **Best Practice** > > Instead of defining each service object and assigning it to a host object > using the `host_name` attribute rather use the [apply rules](#apply) > simplifying your configuration. There are two generic services applied to all hosts in the host group `linux-servers` and `windows-servers` by default: `ping4` and `ping6`. Host objects without a valid `address` resp. `address6` attribute will be excluded. apply Service "ping4" { import "generic-service" check_command = "ping4" vars.sla = "24x7" assign where "linux-servers" in host.groups assign where "windows-servers" in host.groups ignore where host.address == "" } apply Service "ping6" { import "generic-service" check_command = "ping6" vars.sla = "24x7" assign where "linux-servers" in host.groups assign where "windows-servers" in host.groups ignore where host.address6 == "" } Each of these services has the custom attribute `sla` set to `24x7`. The notification apply rule in `notifications.conf` will automatically apply a service notification matching this attribute pattern. apply Notification "mail-icingaadmin" to Service { import "mail-service-notification" user_groups = [ "icingaadmins" ] assign where service.vars.sla == "24x7" } Don't forget to install the [check plugins](#setting-up-check-plugins) required by the services and their check commands. Further details on the monitoring configuration can be found in the [monitoring basics](#monitoring-basics) chapter. ## Configuring DB IDO The DB IDO (Database Icinga Data Output) modules for Icinga 2 take care of exporting all configuration and status information into a database. The IDO database is used by a number of projects including Icinga Web 1.x, Reporting or Icinga Web 2. There is a separate module for each database back-end. At present support for both MySQL and PostgreSQL is implemented. Icinga 2 uses the Icinga 1.x IDOUtils database schema. Icinga 2 requires additional features not yet released with older Icinga 1.x versions. > **Note** > > Please check the [what's new](#whats-new) section for the required schema version. > **Tip** > > Only install the IDO feature if your web interface or reporting tool requires > you to do so (for example, [Icinga Web](#setting-up-icinga-web) or [Icinga Web 2](#setting-up-icingaweb2)). > [Icinga Classic UI](#setting-up-icinga-classic-ui) does not use IDO as backend. ### Installing the Database Server In order to use DB IDO you need to setup either [MySQL](#installing-database-mysql-server) or [PostgreSQL](#installing-database-postgresql-server) as supported database server. > **Note** > > It's up to you whether you choose to install it on the same server where Icinga 2 is running on, > or on a dedicated database host (or cluster). #### Installing MySQL database server Debian/Ubuntu: # apt-get install mysql-server mysql-client RHEL/CentOS 5/6: # yum install mysql-server mysql # chkconfig mysqld on # service mysqld start RHEL/CentOS 7 and Fedora 20 prefer MariaDB over MySQL: # yum install mariadb-server mariadb # systemctl enable mariadb.service # systemctl start mariadb.service SUSE: # zypper install mysql mysql-client # chkconfig mysqld on # service mysqld start RHEL based distributions do not automatically set a secure root password. Do that **now**: # /usr/bin/mysql_secure_installation #### Installing PostgreSQL database server Debian/Ubuntu: # apt-get install postgresql RHEL/CentOS 5/6: # yum install postgresql-server postgresql # chkconfig postgresql on # service postgresql start RHEL/CentOS 7 and Fedora 20 use [systemd](#systemd-service): # yum install postgresql-server postgresql # systemctl enable postgresql.service # systemctl start postgresql.service SUSE: # zypper install postgresql postgresql-server # chkconfig postgresql on # service postgresql start ### Configuring DB IDO MySQL First of all you have to install the `icinga2-ido-mysql` package using your distribution's package manager. Debian/Ubuntu: # apt-get install icinga2-ido-mysql RHEL/CentOS: # yum install icinga2-ido-mysql SUSE: # zypper install icinga2-ido-mysql > **Note** > > Upstream Debian packages provide a database configuration wizard by default. > You can skip the automated setup and install/upgrade the database manually > if you prefer that. #### Setting up the MySQL database Set up a MySQL database for Icinga 2: # mysql -u root -p mysql> CREATE DATABASE icinga; GRANT SELECT, INSERT, UPDATE, DELETE, DROP, CREATE VIEW, INDEX, EXECUTE ON icinga.* TO 'icinga'@'localhost' IDENTIFIED BY 'icinga'; quit After creating the database you can import the Icinga 2 IDO schema using the following command: # mysql -u root -p icinga < /usr/share/icinga2-ido-mysql/schema/mysql.sql #### Upgrading the MySQL database Check the `/usr/share/icinga2-ido-mysql/schema/upgrade` directory for an incremental schema upgrade file. > **Note** > > If there isn't an upgrade file for your current version available there's nothing to do. Apply all database schema upgrade files incrementially. # mysql -u root -p icinga < /usr/share/icinga2-ido-mysql/schema/upgrade/.sql The Icinga 2 DB IDO module will check for the required database schema version on startup and generate an error message if not satisfied. **Example:** You are upgrading Icinga 2 from version `2.0.2` to `2.1.0`. Look into the *upgrade* directory: $ ls /usr/share/icinga2-ido-mysql/schema/upgrade/ 2.0.2.sql 2.1.0.sql There is a new upgrade file called `2.1.0.sql` which must be applied to your IDO database. #### Installing the IDO MySQL module The package provides a new configuration file that is installed in `/etc/icinga2/features-available/ido-mysql.conf`. You will need to update the database credentials in this file. You can enable the `ido-mysql` feature configuration file using `icinga2 feature enable`: # icinga2 feature enable ido-mysql Module 'ido-mysql' was enabled. Make sure to restart Icinga 2 for these changes to take effect. After enabling the ido-mysql feature you have to restart Icinga 2: Debian/Ubuntu, RHEL/CentOS 6 and SUSE: # service icinga2 restart RHEL/CentOS 7 and Fedora 20: # systemctl restart icinga2.service ### Configuring DB IDO PostgreSQL First of all you have to install the `icinga2-ido-pgsql` package using your distribution's package manager. Debian/Ubuntu: # apt-get install icinga2-ido-pgsql RHEL/CentOS: # yum install icinga2-ido-pgsql SUSE: # zypper install icinga2-ido-pgsql > **Note** > > Upstream Debian packages provide a database configuration wizard by default. > You can skip the automated setup and install/upgrade the database manually > if you prefer that. #### Setting up the PostgreSQL database Set up a PostgreSQL database for Icinga 2: # cd /tmp # sudo -u postgres psql -c "CREATE ROLE icinga WITH LOGIN PASSWORD 'icinga'"; # sudo -u postgres createdb -O icinga -E UTF8 icinga # sudo -u postgres createlang plpgsql icinga > **Note** > > Using PostgreSQL 9.x you can omit the `createlang` command. Locate your pg_hba.conf (Debian: `/etc/postgresql/*/main/pg_hba.conf`, RHEL/SUSE: `/var/lib/pgsql/data/pg_hba.conf`), add the icinga user with md5 authentication method and restart the postgresql server. # vim /var/lib/pgsql/data/pg_hba.conf # icinga local icinga icinga md5 host icinga icinga 127.0.0.1/32 md5 host icinga icinga ::1/128 md5 # "local" is for Unix domain socket connections only local all all ident # IPv4 local connections: host all all 127.0.0.1/32 ident # IPv6 local connections: host all all ::1/128 ident # /etc/init.d/postgresql restart After creating the database and permissions you can import the Icinga 2 IDO schema using the following command: # export PGPASSWORD=icinga # psql -U icinga -d icinga < /usr/share/icinga2-ido-pgsql/schema/pgsql.sql #### Upgrading the PostgreSQL database Check the `/usr/share/icinga2-ido-pgsql/schema/upgrade` directory for an incremental schema upgrade file. > **Note** > > If there isn't an upgrade file for your current version available there's nothing to do. Apply all database schema upgrade files incrementially. # export PGPASSWORD=icinga # psql -U icinga -d icinga < /usr/share/icinga2-ido-pgsql/schema/upgrade/.sql The Icinga 2 DB IDO module will check for the required database schema version on startup and generate an error message if not satisfied. **Example:** You are upgrading Icinga 2 from version `2.0.2` to `2.1.0`. Look into the *upgrade* directory: $ ls /usr/share/icinga2-ido-pgsql/schema/upgrade/ 2.0.2.sql 2.1.0.sql There is a new upgrade file called `2.1.0.sql` which must be applied to your IDO database. #### Installing the IDO PostgreSQL module The package provides a new configuration file that is installed in `/etc/icinga2/features-available/ido-pgsql.conf`. You will need to update the database credentials in this file. You can enable the `ido-pgsql` feature configuration file using `icinga2 feature enable`: # icinga2 feature enable ido-pgsql Module 'ido-pgsql' was enabled. Make sure to restart Icinga 2 for these changes to take effect. After enabling the ido-pgsql feature you have to restart Icinga 2: Debian/Ubuntu, RHEL/CentOS 6 and SUSE: # service icinga2 restart RHEL/CentOS 7 and Fedora 20: # systemctl restart icinga2.service ### Setting Up External Command Pipe Web interfaces and other Icinga addons are able to send commands to Icinga 2 through the external command pipe. You can enable the External Command Pipe using icinga2 feature enable: # icinga2 feature enable command After that you will have to restart Icinga 2: Debian/Ubuntu, RHEL/CentOS 6 and SUSE: # service icinga2 restart RHEL/CentOS 7 and Fedora 20: # systemctl restart icinga2.service By default the command pipe file is owned by the group `icingacmd` with read/write permissions. Add your webserver's user to the group `icingacmd` to enable sending commands to Icinga 2 through your web interface: # usermod -G -a icingacmd www-data Debian packages use `nagios` as the default user and group name. Therefore change `icingacmd` to `nagios`. The webserver's user is different between distributions so you might have to change `www-data` to `wwwrun`, `www`, or `apache`. Change "www-data" to the user you're using to run queries. > **Note** > > Packages will do that automatically. Verify that by running `id ` and skip this > step. ## Setting up Livestatus The [MK Livestatus](http://mathias-kettner.de/checkmk_livestatus.html) project implements a query protocol that lets users query their Icinga instance for status information. It can also be used to send commands. > **Tip** > > Only install the Livestatus feature if your web interface or addon requires > you to do so (for example, [Icinga Web 2](#setting-up-icingaweb2)). > [Icinga Classic UI](#setting-up-icinga-classic-ui) and [Icinga Web](#setting-up-icinga-web) > do not use Livestatus as backend. The Livestatus component that is distributed as part of Icinga 2 is a re-implementation of the Livestatus protocol which is compatible with MK Livestatus. Details on the available tables and attributes with Icinga 2 can be found in the [Livestatus Schema](#schema-livestatus) section. You can enable Livestatus using icinga2 feature enable: # icinga2 feature enable livestatus After that you will have to restart Icinga 2: Debian/Ubuntu, RHEL/CentOS 6 and SUSE: # service icinga2 restart RHEL/CentOS 7 and Fedora 20: # systemctl restart icinga2.service By default the Livestatus socket is available in `/var/run/icinga2/cmd/livestatus`. In order for queries and commands to work you will need to add your query user (e.g. your web server) to the `icingacmd` group: # usermod -a -G icingacmd www-data The Debian packages use `nagios` as the user and group name. Make sure to change `icingacmd` to `nagios` if you're using Debian. Change "www-data" to the user you're using to run queries. In order to use the historical tables provided by the livestatus feature (for example, the `log` table) you need to have the `CompatLogger` feature enabled. By default these logs are expected to be in `/var/log/icinga2/compat`. A different path can be set using the `compat_log_path` configuration attribute. # icinga2 feature enable compatlog ## Setting up Icinga 2 User Interfaces Icinga 2 is compatible with Icinga 1.x user interfaces by providing additional features required as backends. Furthermore these interfaces can be used for the newly created `Icinga Web 2` user interface. Some interface features will only work in a limited manner due to [compatibility reasons](#differences-1x-2), other features like the statusmap parents are available by dumping the host dependencies as parents. Special restrictions are noted specifically in the sections below. > **Tip** > > Choose your preferred interface. There's no need to install [Classic UI](#setting-up-icinga-classic-ui) > if you prefer [Icinga Web](#setting-up-icinga-web) or [Icinga Web 2](#setting-up-icingaweb2) for example. ### Requirements * Web server (Apache2/Httpd, Nginx, Lighttp, etc) * User credentials * Firewall ports (tcp/80) The Debian, RHEL and SUSE packages for Icinga [Classic UI](#setting-up-icinga-classic-ui), [Web](#setting-up-icinga-web) and [Icingaweb 2](#setting-up-icingaweb2) depend on Apache2 as web server. #### Webserver Debian/Ubuntu packages will automatically fetch and install the required packages. RHEL/CentOS/Fedora: # yum install httpd # chkconfig httpd on && service httpd start ## RHEL7 # systemctl enable httpd && systemctl start httpd SUSE: # zypper install apache2 # chkconfig on && service apache2 start #### Firewall Rules Example: # iptables -A INPUT -p tcp -m tcp --dport 80 -j ACCEPT # service iptables save RHEL/CentOS 7 specific: # firewall-cmd --add-service=http # firewall-cmd --permanent --add-service=http ### Setting up Icinga Classic UI Icinga 2 can write `status.dat` and `objects.cache` files in the format that is supported by the Icinga 1.x Classic UI. [External commands](#external-commands) (a.k.a. the "command pipe") are also supported. It also supports writing Icinga 1.x log files which are required for the reporting functionality in the Classic UI. #### Installing Icinga Classic UI The Icinga package repository has both Debian and RPM packages. You can install the Classic UI using the following packages: Distribution | Packages --------------|--------------------- Debian | icinga2-classicui RHEL/SUSE | icinga2-classicui-config icinga-gui The Debian packages require additional packages which are provided by the [Debian Monitoring Project](http://www.debmon.org) (`DebMon`) repository. `libjs-jquery-ui` requires at least version `1.10.*` which is not available in Debian 7 (Wheezy) and Ubuntu 12.04 LTS (Precise). Add the following repositories to satisfy this dependency: Distribution | Package Repositories ------------------------------|------------------------------ Debian Wheezy | [wheezy-backports](http://backports.debian.org/Instructions/) or [DebMon](http://www.debmon.org) Ubuntu 12.04 LTS (Precise) | [Icinga PPA](https://launchpad.net/~formorer/+archive/icinga) On all distributions other than Debian you may have to restart both your web server as well as Icinga 2 after installing the Classic UI package. Icinga Classic UI requires the [StatusDataWriter](#status-data), [CompatLogger](#compat-logging) and [ExternalCommandListener](#external-commands) features. Enable these features and restart Icinga 2. # icinga2 feature enable statusdata compatlog command In order for commands to work you will need to [setup the external command pipe](#setting-up-external-command-pipe). #### Setting Up Icinga Classic UI Summary Verify that your Icinga 1.x Classic UI works by browsing to your Classic UI installation URL: Distribution | URL | Default Login --------------|--------------------------------------------------------------------------|-------------------------- Debian | [http://localhost/icinga2-classicui](http://localhost/icinga2-classicui) | asked during installation all others | [http://localhost/icinga](http://localhost/icinga) | icingaadmin/icingaadmin For further information on configuration, troubleshooting and interface documentation please check the official [Icinga 1.x user interface documentation](http://docs.icinga.org/latest/en/ch06.html). ### Setting up Icinga Web Icinga 2 can write to the same schema supplied by `Icinga IDOUtils 1.x` which is an explicit requirement to run `Icinga Web` next to the external command pipe. Therefore you need to setup the [DB IDO feature](#configuring-ido) remarked in the previous sections. #### Installing Icinga Web The Icinga package repository has both Debian and RPM packages. You can install Icinga Web using the following packages (RPMs ship an additional configuration package): Distribution | Packages --------------|------------------------------------------------------- RHEL/SUSE | icinga-web icinga-web-{mysql,pgsql} Debian | icinga-web icinga-web-config-icinga2-ido-{mysql,pgsql} #### Icinga Web on RPM based systems Additionally you need to setup the `icinga_web` database and import the database schema. Details can be found in the package `README` files, for example [README.RHEL](https://github.com/Icinga/icinga-web/blob/master/doc/README.RHEL) The Icinga Web RPM packages install the schema files into `/usr/share/doc/icinga-web-*/schema` (`*` means package version). The Icinga Web dist tarball ships the schema files in `etc/schema`. On SuSE-based distributions the schema files are installed in `/usr/share/doc/packages/icinga-web/schema`. Example for RHEL and MySQL: # mysql -u root -p mysql> CREATE DATABASE icinga_web; GRANT SELECT, INSERT, UPDATE, DELETE, DROP, CREATE VIEW, INDEX, EXECUTE ON icinga_web.* TO 'icinga_web'@'localhost' IDENTIFIED BY 'icinga_web'; quit # mysql -u root -p icinga_web < /usr/share/doc/icinga-web-/schema/mysql.sql Icinga Web requires the IDO feature as database backend using MySQL or PostgreSQL. Enable that feature, e.g. for MySQL. # icinga2 feature enable ido-mysql If you've changed your default credentials you may either create a read-only user or use the credentials defined in the IDO feature for Icinga Web backend configuration. Edit `databases.xml` accordingly and clear the cache afterwards. Further details can be found in the [Icinga Web documentation](http://docs.icinga.org/latest/en/icinga-web-config.html). # vim /etc/icinga-web/conf.d/databases.xml # icinga-web-clearcache Additionally you need to enable the `command` feature for sending [external commands](#external-commands): # icinga2 feature enable command In order for commands to work you will need to [setup the external command pipe](#setting-up-external-command-pipe). Then edit the Icinga Web configuration for sending commands in `/etc/icinga-web/conf.d/access.xml` (RHEL) or `/etc/icinga-web/access.xml` (SUSE) setting the command pipe path to the default used in Icinga 2. Make sure to clear the cache afterwards. # vim /etc/icinga-web/conf.d/access.xml /var/run/icinga2/cmd/icinga2.cmd # icinga-web-clearcache > **Note** > > The path to the Icinga Web `clearcache` script may differ. Please check the > [Icinga Web documentation](https://docs.icinga.org) for details. #### Icinga Web on Debian systems Since Icinga Web `1.11.1-2` the IDO auto-configuration has been moved into additional packages on Debian and Ubuntu. The package `icinga-web` no longer configures the IDO connection. You must now use one of the config packages: - `icinga-web-config-icinga2-ido-mysql` - `icinga-web-config-icinga2-ido-pgsql` These packages take care of setting up the [DB IDO](#configuring-db-ido) configuration, enabling the external command pipe for Icinga Web and depend on the corresponding packages of Icinga 2. Please read the `README.Debian` files for details and advanced configuration: - `/usr/share/doc/icinga-web/README.Debian` - `/usr/share/doc/icinga-web-config-icinga2-ido-mysql/README.Debian` - `/usr/share/doc/icinga-web-config-icinga2-ido-pgsql/README.Debian` When changing Icinga Web configuration files make sure to clear the config cache: # /usr/lib/icinga-web/bin/clearcache.sh > **Note** > > If you are using an older version of Icinga Web, install it like this and adapt > the configuration manually as shown in [the RPM notes](#icinga-web-rpm-notes): > > `apt-get install --no-install-recommends icinga-web` #### Setting Up Icinga Web Summary Verify that your Icinga 1.x Web works by browsing to your Web installation URL: Distribution | URL | Default Login --------------|-------------------------------------------------------------|-------------------------- Debian | [http://localhost/icinga-web](http://localhost/icinga-web) | asked during installation all others | [http://localhost/icinga-web](http://localhost/icinga-web) | root/password For further information on configuration, troubleshooting and interface documentation please check the official [Icinga 1.x user interface documentation](http://docs.icinga.org/latest/en/ch06.html). ### Setting up Icinga Web 2 Icinga Web 2 will support `DB IDO` or `Livestatus` as backends. Using DB IDO as backend, you need to install and configure the [DB IDO backend](#configuring-db-ido). Once finished, you can enable the feature for DB IDO MySQL: # icinga2 feature enable ido-mysql Furthermore [external commands](#external-commands) are supported through the external command pipe. # icinga2 feature enable command In order for commands to work you will need to [setup the external command pipe](#setting-up-external-command-pipe). Please consult the INSTALL documentation shipped with `Icinga Web 2` for further instructions on how to install Icinga Web 2 and to configure backends, resources and instances. > **Note** > > Icinga Web 2 is still under heavy development. Rather than installing it > yourself you should consider testing it using the available > [Vagrant demo VM](https://github.com/icinga/icinga-vagrant). Check the [Icinga website](https://www.icinga.org) for release schedules, blog updates and more. ### Additional visualization There are many visualization addons which can be used with Icinga 2. Some of the more popular ones are [PNP](#addons-graphing-pnp), [inGraph](#addons-graphing-pnp) (graphing performance data), [Graphite](#addons-graphing-pnp), and [NagVis](#addons-visualization-nagvis) (network maps). ## Configuration Tools If you require your favourite configuration tool to export Icinga 2 configuration, please get in touch with their developers. The Icinga project does not provide a configuration web interface or similar. > **Tip** > > Get to know the new configuration format and the advanced [apply](#using-apply) rules and > use [syntax highlighting](#configuration-syntax-highlighting) in vim/nano. If you're looking for puppet manifests, chef cookbooks, ansible recipes, etc - we're happy to integrate them upstream, so please get in touch at [https://support.icinga.org](https://support.icinga.org). These tools are in development and require feedback and tests: * [Ansible Roles](https://github.com/Icinga/icinga2-ansible) * [Puppet Module](https://github.com/Icinga/puppet-icinga2) ## Configuration Syntax Highlighting Icinga 2 ships configuration examples for syntax highlighting using the `vim` and `nano` editors. The RHEL, SUSE and Debian package `icinga2-common` install these files into `/usr/share/*/icinga2-common/syntax`. Sources provide these files in `tools/syntax`. ### Configuration Syntax Highlighting using Vim Create a new local vim configuration storage, if not already existing. Edit `vim/ftdetect/icinga2.vim` if your paths to the Icinga 2 configuration differ. $ PREFIX=~/.vim $ mkdir -p $PREFIX/{syntax,ftdetect} $ cp vim/syntax/icinga2.vim $PREFIX/syntax/ $ cp vim/ftdetect/icinga2.vim $PREFIX/ftdetect/ Test it: $ vim /etc/icinga2/conf.d/templates.conf ### Configuration Syntax Highlighting using Nano Copy the `/etc/nanorc` sample file to your home directory. Create the `/etc/nano` directory and copy the provided `icinga2.nanorc` into it. $ cp /etc/nanorc ~/.nanorc # mkdir -p /etc/nano # cp icinga2.nanorc /etc/nano/ Then include the icinga2.nanorc file in your ~/.nanorc by adding the following line: $ vim ~/.nanorc ## Icinga 2 include "/etc/nano/icinga2.nanorc" Test it: $ nano /etc/icinga2/conf.d/templates.conf ## Running Icinga 2 ### Init Script Icinga 2's init script is installed in `/etc/init.d/icinga2` by default: # /etc/init.d/icinga2 Usage: /etc/init.d/icinga2 {start|stop|restart|reload|checkconfig|status} Command | Description --------------------|------------------------ start | The `start` action starts the Icinga 2 daemon. stop | The `stop` action stops the Icinga 2 daemon. restart | The `restart` action is a shortcut for running the `stop` action followed by `start`. reload | The `reload` action sends the `HUP` signal to Icinga 2 which causes it to restart. Unlike the `restart` action `reload` does not wait until Icinga 2 has restarted. checkconfig | The `checkconfig` action checks if the `/etc/icinga2/icinga2.conf` configuration file contains any errors. status | The `status` action checks if Icinga 2 is running. By default the Icinga 2 daemon is running as `icinga` user and group using the init script. Using Debian packages the user and group are set to `nagios` for historical reasons. ### Systemd Service Modern distributions (Fedora, OpenSUSE, etc.) already use `Systemd` natively. Enterprise-grade distributions such as RHEL7 changed to `Systemd` recently. Icinga 2 Packages will install the service automatically. The Icinga 2 `Systemd` service can be (re)started, reloaded, stopped and also queried for its current status. # systemctl status icinga2 icinga2.service - Icinga host/service/network monitoring system Loaded: loaded (/usr/lib/systemd/system/icinga2.service; disabled) Active: active (running) since Mi 2014-07-23 13:39:38 CEST; 15s ago Process: 21692 ExecStart=/usr/sbin/icinga2 -c ${ICINGA2_CONFIG_FILE} -d -e ${ICINGA2_ERROR_LOG} -u ${ICINGA2_USER} -g ${ICINGA2_GROUP} (code=exited, status=0/SUCCESS) Process: 21674 ExecStartPre=/usr/sbin/icinga2-prepare-dirs /etc/sysconfig/icinga2 (code=exited, status=0/SUCCESS) Main PID: 21727 (icinga2) CGroup: /system.slice/icinga2.service └─21727 /usr/sbin/icinga2 -c /etc/icinga2/icinga2.conf -d -e /var/log/icinga2/error.log -u icinga -g icinga --no-stack-rlimit Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 309 Service(s). Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 1 User(s). Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 15 Notification(s). Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 4 ScheduledDowntime(s). Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 1 UserGroup(s). Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 1 IcingaApplication(s). Jul 23 13:39:38 nbmif icinga2[21692]: [2014-07-23 13:39:38 +0200] information/ConfigItem: Checked 8 Dependency(s). Jul 23 13:39:38 nbmif systemd[1]: Started Icinga host/service/network monitoring system. `Systemd` supports the following command actions: Command | Description --------------------|------------------------ start | The `start` action starts the Icinga 2 daemon. stop | The `stop` action stops the Icinga 2 daemon. restart | The `restart` action is a shortcut for running the `stop` action followed by `start`. reload | The `reload` action sends the `HUP` signal to Icinga 2 which causes it to restart. Unlike the `restart` action `reload` does not wait until Icinga 2 has restarted. status | The `status` action checks if Icinga 2 is running. enable | The `enable` action enables the service being started at system boot time (similar to `chkconfig`) If you're stuck with configuration errors, you can manually invoke the [configuration validation](#config-validation). # systemctl enable icinga2 # systemctl restart icinga2 Job for icinga2.service failed. See 'systemctl status icinga2.service' and 'journalctl -xn' for details. ### Icinga 2 CLI Commands Icinga 2 ships its own integrated cli commands supporting bash-autocompletion. These cli commands will allow you to use certain functionality provided by and around the Icinga 2 daemon. > **Note** > > The cli commands are available in Icinga 2 starting with *2.2*. Each cli command provides its own help and usage information, so please make sure to always run them withthe `--help` parameter. Run `icinga2` without any arguments (or using `--help`) to get a list of all available global options. # icinga2 icinga2 - The Icinga 2 network monitoring daemon (version: v2.1.1-299-gf695275) Usage: icinga2 [] Supported commands: * daemon (starts Icinga 2) * feature disable (disables specified feature) * feature enable (enables specified feature) * feature list (lists all enabled features) * node add (add node) * node blacklist add (adds a new blacklist filter) * node blacklist list (lists all blacklist filters) * node blacklist remove (removes a blacklist filter) * node list (lists all nodes) * node remove (removes node) * node set (set node attributes) * node setup (set up node) * node update-config (update node config) * node whitelist add (adds a new whitelist filter) * node whitelist list (lists all whitelist filters) * node whitelist remove (removes a whitelist filter) * node wizard (wizard for node setup) * object list (lists all objects) * pki new-ca (sets up a new CA) * pki new-cert (creates a new CSR) * pki request (requests a certificate) * pki save-cert (saves another Icinga 2 instance's certificate) * pki sign-csr (signs a CSR) * pki ticket (generates a ticket) * repository clear-changes (clear uncommitted repository changes) * repository commit (commit repository changes) * repository endpoint add (adds a new Endpoint object) * repository endpoint list (lists all Endpoint objects) * repository endpoint remove (removes a Endpoint object) * repository host add (adds a new Host object) * repository host list (lists all Host objects) * repository host remove (removes a Host object) * repository service add (adds a new Service object) * repository service list (lists all Service objects) * repository service remove (removes a Service object) * repository zone add (adds a new Zone object) * repository zone list (lists all Zone objects) * repository zone remove (removes a Zone object) * variable get (gets a variable) * variable list (lists all variables) Global options: -h [ --help ] show this help message -V [ --version ] show version information --color use VT100 color codes even when stdout is not a terminal -D [ --define ] arg define a constant -l [ --library ] arg load a library -I [ --include ] arg add include search directory -x [ --log-level ] arg specify the log level for the console log Command options: Report bugs at Icinga home page: #### Icinga 2 CLI Bash Autocompletion Bash Auto-Completion (pressing ``) is provided only for the corresponding context. While `--config` will suggest and auto-complete files and directories on disk, `feature enable` will only suggest disabled features. `repository` will know about object specific attributes, and so on. Try it yourself. RPM and Debian packages install the bash completion files into `/etc/bash_completion.d/icinga2`. You will need to install the `bash-completion` package if not already installed. RHEL/CentOS/Fedora: # yum install bash-completion SUSE: # zypper install bash-completion Debian/Ubuntu: # apt-get install bash-completion #### Icinga 2 CLI Global Options ##### Libraries Instead of loading libraries using the [`library` config directive](#library) you can also use the `--library` command-line option. ##### Constants [Global constants](#global-constants) can be set using the `--define` command-line option. ##### Config Include Path When including files you can specify that the include search path should be checked. You can do this by putting your configuration file name in angle brackets like this: include This would cause Icinga 2 to search its include path for the configuration file `test.conf`. By default the installation path for the Icinga Template Library is the only search directory. Using the `--include` command-line option additional search directories can be added. #### Cli command: Daemon The cli command `daemon` provides the functionality to start/stop Icinga 2. Furthermore it provides the [configuration validation](#config-validation). # icinga2 daemon --help icinga2 - The Icinga 2 network monitoring daemon (version: v2.1.1-299-gf695275) Usage: icinga2 daemon [] Starts Icinga 2. Global options: -h [ --help ] show this help message -V [ --version ] show version information --color use VT100 color codes even when stdout is not a terminal -D [ --define ] arg define a constant -l [ --library ] arg load a library -I [ --include ] arg add include search directory -x [ --log-level ] arg specify the log level for the console log Command options: -c [ --config ] arg parse a configuration file -z [ --no-config ] start without a configuration file -C [ --validate ] exit after validating the configuration -e [ --errorlog ] arg log fatal errors to the specified log file (only works in combination with --daemonize) -d [ --daemonize ] detach from the controlling terminal Report bugs at Icinga home page: ##### Config Files Using the `--config` option you can specify one or more configuration files. Config files are processed in the order they're specified on the command-line. When no configuration file is specified and the `--no-config` is not used Icinga 2 automatically falls back to using the configuration file `SysconfDir + "/icinga2/icinga2.conf"` (where SysconfDir is usually `/etc`). ##### Config Validation The `--validate` option can be used to check if your configuration files contain errors. If any errors are found the exit status is 1, otherwise 0 is returned. More details in the [configuration validation](#config-validation) chapter. #### Cli command: Feature The cli commands for `enable` and `disable` feature support bash auto-completion and will only suggest features for the corresponding context. Like disabling a feature will only bring up all enabled features. # icinga2 feature disable checker --color --define --help --include --library --log-level mainlog notification --version # icinga2 feature enable api command debuglog graphite icingastatus ido-pgsql --library --log-level statusdata --version --color compatlog --define --help ido-mysql --include livestatus perfdata syslog #### Cli command: Node Provides the functionality to install and manage master and client nodes in a [remote monitoring ](#icinga2-remote-client-monitoring) or [distributed cluster](#distributed-monitoring-high-availability) scenario. # icinga2 node --help icinga2 - The Icinga 2 network monitoring daemon (version: v2.1.1-299-gf695275) Usage: icinga2 [] Supported commands: * node add (add node) * node blacklist add (adds a new blacklist filter) * node blacklist list (lists all blacklist filters) * node blacklist remove (removes a blacklist filter) * node list (lists all nodes) * node remove (removes node) * node set (set node attributes) * node setup (set up node) * node update-config (update node config) * node whitelist add (adds a new whitelist filter) * node whitelist list (lists all whitelist filters) * node whitelist remove (removes a whitelist filter) * node wizard (wizard for node setup) Global options: -h [ --help ] show this help message -V [ --version ] show version information --color use VT100 color codes even when stdout is not a terminal -D [ --define ] arg define a constant -l [ --library ] arg load a library -I [ --include ] arg add include search directory -x [ --log-level ] arg specify the log level for the console log Command options: Report bugs at Icinga home page: #### Cli command: Object The `object` cli command can be used to list all configuration objects and their attributes. The command also shows where each of the attributes was modified. That way you can also identify which objects have been created from your [apply rules](#apply). More information can be found in the [troubleshooting](#list-configuration-objects) section. # icinga2 object --help icinga2 - The Icinga 2 network monitoring daemon (version: v2.1.1-299-gf695275) Usage: icinga2 [] Supported commands: * object list (lists all objects) Global options: -h [ --help ] show this help message -V [ --version ] show version information --color use VT100 color codes even when stdout is not a terminal -D [ --define ] arg define a constant -l [ --library ] arg load a library -I [ --include ] arg add include search directory -x [ --log-level ] arg specify the log level for the console log Command options: Report bugs at Icinga home page: #### Cli command: Pki Provides the cli commands to * generate a new local CA * generate a new CSR or self-signed certificate * sign a CSR and return a certificate * save a master certificate manually * request a signed certificate from the master * generate a new ticket for the client setup This functionality is used by the [node setup/wizard](#cli-command-pki) cli commands too. # icinga2 pki --help icinga2 - The Icinga 2 network monitoring daemon (version: v2.1.1-299-gf695275) Usage: icinga2 [] Supported commands: * pki new-ca (sets up a new CA) * pki new-cert (creates a new CSR) * pki request (requests a certificate) * pki save-cert (saves another Icinga 2 instance's certificate) * pki sign-csr (signs a CSR) * pki ticket (generates a ticket) Global options: -h [ --help ] show this help message -V [ --version ] show version information --color use VT100 color codes even when stdout is not a terminal -D [ --define ] arg define a constant -l [ --library ] arg load a library -I [ --include ] arg add include search directory -x [ --log-level ] arg specify the log level for the console log Command options: Report bugs at Icinga home page: #### Cli command: Repository Provides the functionality to manage the Icinga 2 configuration repository in `/etc/icinga2/repository.d`. All changes are logged and must be committed or cleared after review. > **Note** > > The cli command `repository` only supports basic configuration manipulation (add, remove) > and a limited set of objects required for the [remote client] integration. Future > versions will support more options (set, etc.). > > Please check the Icinga 2 development roadmap for updates. # icinga2 repository --help icinga2 - The Icinga 2 network monitoring daemon (version: v2.1.1-299-gf695275) Usage: icinga2 [] Supported commands: * repository clear-changes (clear uncommitted repository changes) * repository commit (commit repository changes) * repository endpoint add (adds a new Endpoint object) * repository endpoint list (lists all Endpoint objects) * repository endpoint remove (removes a Endpoint object) * repository host add (adds a new Host object) * repository host list (lists all Host objects) * repository host remove (removes a Host object) * repository service add (adds a new Service object) * repository service list (lists all Service objects) * repository service remove (removes a Service object) * repository zone add (adds a new Zone object) * repository zone list (lists all Zone objects) * repository zone remove (removes a Zone object) Global options: -h [ --help ] show this help message -V [ --version ] show version information --color use VT100 color codes even when stdout is not a terminal -D [ --define ] arg define a constant -l [ --library ] arg load a library -I [ --include ] arg add include search directory -x [ --log-level ] arg specify the log level for the console log Command options: Report bugs at Icinga home page: #### Cli command: Variable Lists all configured variables (constants) in a similar fasion like [object list](#cli-command-object). # icinga2 variable --help icinga2 - The Icinga 2 network monitoring daemon (version: v2.1.1-299-gf695275) Usage: icinga2 [] Supported commands: * variable get (gets a variable) * variable list (lists all variables) Global options: -h [ --help ] show this help message -V [ --version ] show version information --color use VT100 color codes even when stdout is not a terminal -D [ --define ] arg define a constant -l [ --library ] arg load a library -I [ --include ] arg add include search directory -x [ --log-level ] arg specify the log level for the console log Command options: Report bugs at Icinga home page: ### Enabling/Disabling Features Icinga 2 provides configuration files for some commonly used features. These are installed in the `/etc/icinga2/features-available` directory and can be enabled and disabled using the `icinga2 feature enable` and `icinga2 feature disable` [cli commands](#cli-command-feature), respectively. The `icinga2 feature enable` cli command creates symlinks in the `/etc/icinga2/features-enabled` directory which is included by default in the example configuration file. You can view a list of enabled and disabled features: # icinga2 feature list Disabled features: api command compatlog debuglog graphite icingastatus ido-mysql ido-pgsql livestatus notification perfdata statusdata syslog Enabled features: checker mainlog notification Using the `icinga2 feature enable` command you can enable features: # icinga2 feature enable graphite Enabling feature graphite. Make sure to restart Icinga 2 for these changes to take effect. You can disable features using the `icinga2 feature disable` command: # icinga2 feature disable ido-mysql livestatus Disabling feature ido-mysql. Make sure to restart Icinga 2 for these changes to take effect. Disabling feature livestatus. Make sure to restart Icinga 2 for these changes to take effect. The `icinga2 feature enable` and `icinga2 feature disable` commands do not restart Icinga 2. You will need to restart Icinga 2 using the init script after enabling or disabling features. ### Configuration Validation Once you've edited the configuration files make sure to tell Icinga 2 to validate the configuration changes. Icinga 2 will log any configuration error including a hint on the file, the line number and the affected configuration line itself. The following example creates an apply rule without any `assign` condition. apply Service "5872-ping4" { import "generic-service" check_command = "ping4" //assign where match("5872-*", host.name) } Validate the configuration with the init script option `checkconfig`: # /etc/init.d/icinga2 checkconfig > **Note** > > Using [Systemd](#systemd-service) you need to manually validate the configuration using > the cli command below. Or manually passing the `-C` argument: # /usr/sbin/icinga2 daemon -c /etc/icinga2/icinga2.conf -C [2014-05-22 17:07:25 +0200] critical/ConfigItem: Location: /etc/icinga2/conf.d/tests/5872.conf(5): } /etc/icinga2/conf.d/tests/5872.conf(6): /etc/icinga2/conf.d/tests/5872.conf(7): apply Service "5872-ping4" { ^^^^^^^^^^^^^ /etc/icinga2/conf.d/tests/5872.conf(8): import "test-generic-service" /etc/icinga2/conf.d/tests/5872.conf(9): check_command = "ping4" Config error: 'apply' is missing 'assign' [2014-05-22 17:07:25 +0200] critical/ConfigItem: 1 errors, 0 warnings. Icinga 2 detected configuration errors. > **Tip** > > Icinga 2 will automatically detect the default path for `icinga2.conf` > in `SysconfDir + /icinga2/icinga2.conf` and you can safely omit this parameter. > > `# icinga2 daemon -C` If you encouter errors during configuration validation, please make sure to read the [troubleshooting](#troubleshooting) chapter. You can also use the [cli command](#cli-command-object) `icinga2 object list` after validation passes to analyze object attributes, inheritance or created objects by apply rules. Find more on troubleshooting with `object list` in [this chapter](#list-configuration-objects). Example filtered by `Service` objects with the name `ping*`: # icinga2 object list --type Service --name *ping* Object 'nbmif.int.netways.de!ping4' of type 'Service': * __name = 'nbmif.int.netways.de!ping4' * check_command = 'ping4' % = modified in '/etc/icinga2/conf.d/services.conf', lines 17:3-17:25 * check_interval = 60 % = modified in '/etc/icinga2/conf.d/templates.conf', lines 28:3-28:21 * host_name = 'nbmif.int.netways.de' % = modified in '/etc/icinga2/conf.d/services.conf', lines 14:1-14:21 * max_check_attempts = 3 % = modified in '/etc/icinga2/conf.d/templates.conf', lines 27:3-27:24 * name = 'ping4' % = modified in '/etc/icinga2/conf.d/services.conf', lines 14:1-14:21 * retry_interval = 30 % = modified in '/etc/icinga2/conf.d/templates.conf', lines 29:3-29:22 * templates = [ 'ping4', 'generic-service' ] % += modified in '/etc/icinga2/conf.d/services.conf', lines 14:1-14:21 % += modified in '/etc/icinga2/conf.d/templates.conf', lines 26:1-30:1 * type = 'Service' * vars % += modified in '/etc/icinga2/conf.d/services.conf', lines 18:3-18:19 * sla = '24x7' % = modified in '/etc/icinga2/conf.d/services.conf', lines 18:3-18:19 ### Reload on Configuration Changes Everytime you have changed your configuration you should first tell Icinga 2 to [validate](#config-validation). If there are no validation errors you can safely reload the Icinga 2 daemon. # /etc/init.d/icinga2 reload > **Note** > > The `reload` action will send the `SIGHUP` signal to the Icinga 2 daemon > which will validate the configuration in a separate process and not stop > the other events like check execution, notifications, etc. > > Details can be found [here](#differences-1x-2-real-reload). ## Vagrant Demo VM The Icinga Vagrant Git repository contains support for [Vagrant](http://docs.vagrantup.com/v2/) with VirtualBox. Please note that Vagrant version `1.0.x` is not supported. At least version `1.2.x` is required. In order to build the Vagrant VM first you will have to check out the Git repository: $ git clone git://git.icinga.org/icinga-vagrant.git For Icinga 2 there are currently two scenarios available: * `icinga2x` bringing up a standalone box with Icinga 2 * `icinga2x-cluster` setting up two virtual machines in a master/slave cluster > **Note** > > Please consult the `README.md` file for each project for further installation > details at [https://github.com/Icinga/icinga-vagrant] Once you have checked out the Git repository navigate to your required vagrant box and build the VM using the following command: $ vagrant up The Vagrant VMs are based on CentOS 6.x and are using the official Icinga 2 RPM snapshot packages from `packages.icinga.org`. The check plugins are installed from EPEL providing RPMs with sources from the Monitoring Plugins project.