# Migration from Icinga 1.x ## Configuration Migration The Icinga 2 configuration format introduces plenty of behavioural changes. In order to ease migration from Icinga 1.x, this section provides hints and tips on your migration requirements. ### Configuration Migration Script A standalone configuration migration script is available at https://github.com/Icinga/icinga2-migration. All further details on the command line parameters are documented there too. Please note that not each configuration detail, trick or attribute does work. Some specific migration steps will be still required to be done manually, especially if you want to preserve your existing file layout, or any other object specific policies. > **Note** > > It is highly recommended to review your existing installation, do an inventory > of checked objects, thresholds and then design your new configuration layout. > Keep in mind that the more dynamic approach using the [apply rules](3-monitoring-basics.md#using-apply) > allows you to start over in many scenarios. ### Manual Config Migration For a long-term migration of your configuration you should consider re-creating your configuration based on the proposed Icinga 2 configuration paradigm. Please read the [next chapter](19-migrating-from-icinga-1x.md#differences-1x-2) to find out more about the differences between 1.x and 2. ### Manual Config Migration Hints These hints should provide you with enough details for manually migrating your configuration, or to adapt your configuration export tool to dump Icinga 2 configuration instead of Icinga 1.x configuration. The examples are taken from Icinga 1.x test and production environments and converted straight into a possible Icinga 2 format. If you found a different strategy, please let us know! If you require in-depth explanations, please check the [next chapter](19-migrating-from-icinga-1x.md#differences-1x-2). #### Manual Config Migration Hints for Intervals By default all intervals without any duration literal are interpreted as seconds. Therefore all existing Icinga 1.x `*_interval` attributes require an additional `m` duration literal. Icinga 1.x: define service { service_description service1 host_name localhost1 check_command test_customvar use generic-service check_interval 5 retry_interval 1 } Icinga 2: object Service "service1" { import "generic-service" host_name = "localhost1" check_command = "test_customvar" check_interval = 5m retry_interval = 1m } #### Manual Config Migration Hints for Services If you have used the `host_name` attribute in Icinga 1.x with one or more host names this service belongs to, you can migrate this to the [apply rules](3-monitoring-basics.md#using-apply) syntax. Icinga 1.x: define service { service_description service1 host_name localhost1,localhost2 check_command test_check use generic-service } Icinga 2: apply Service "service1" { import "generic-service" check_command = "test_check" assign where host.name in [ "localhost1", "localhost2" ] } In Icinga 1.x you would have organized your services with hostgroups using the `hostgroup_name` attribute like the following example: define service { service_description servicewithhostgroups hostgroup_name hostgroup1,hostgroup3 check_command test_check use generic-service } Using Icinga 2 you can migrate this to the [apply rules](3-monitoring-basics.md#using-apply) syntax: apply Service "servicewithhostgroups" { import "generic-service" check_command = "test_check" assign where "hostgroup1" in host.groups assign where "hostgroup3" in host.groups } #### Manual Config Migration Hints for Group Members The Icinga 1.x hostgroup `hg1` has two members `host1` and `host2`. The hostgroup `hg2` has `host3` as a member and includes all members of the `hg1` hostgroup. define hostgroup { hostgroup_name hg1 members host1,host2 } define hostgroup { hostgroup_name hg2 members host3 hostgroup_members hg1 } This can be migrated to Icinga 2 and [using group assign](20-language-reference.md#group-assign). The additional nested hostgroup `hg1` is included into `hg2` with the `groups` attribute. object HostGroup "hg1" { assign where host.name in [ "host1", "host2" ] } object HostGroup "hg2" { groups = [ "hg1" ] assign where host.name == "host3" } These assign rules can be applied for all groups: `HostGroup`, `ServiceGroup` and `UserGroup` (requires renaming from `contactgroup`). > **Tip** > > Define custom attributes and assign/ignore members based on these attribute pattern matches. #### Manual Config Migration Hints for Check Command Arguments Host and service check command arguments are separated by a `!` in Icinga 1.x. Their order is important and they are referenced as `$ARGn$` where `n` is the argument counter. define command { command_name my-ping command_line $USER1$/check_ping -H $HOSTADDRESS$ -w $ARG1$ -c $ARG2$ -p 5 } define service { use generic-service host_name my-server service_description my-ping check_command my-ping-check!100.0,20%!500.0,60% } While you could manually migrate this like (please note the new generic command arguments and default argument values!): object CheckCommand "my-ping-check" { import "plugin-check-command" command = [ PluginDir + "/check_ping", "-4" ] arguments = { "-H" = "$ping_address$" "-w" = "$ping_wrta$,$ping_wpl$%" "-c" = "$ping_crta$,$ping_cpl$%" "-p" = "$ping_packets$" "-t" = "$ping_timeout$" } vars.ping_address = "$address$" vars.ping_wrta = 100 vars.ping_wpl = 5 vars.ping_crta = 200 vars.ping_cpl = 15 } object Service "my-ping" { import "generic-service" host_name = "my-server" check_command = "my-ping-check" vars.ping_wrta = 100 vars.ping_wpl = 20 vars.ping_crta = 500 vars.ping_cpl = 60 } #### Manual Config Migration Hints for Runtime Macros Runtime macros have been renamed. A detailed comparison table can be found [here](19-migrating-from-icinga-1x.md#differences-1x-2-runtime-macros). For example, accessing the service check output looks like the following in Icinga 1.x: $SERVICEOUTPUT$ In Icinga 2 you will need to write: $service.output$ Another example referencing the host's address attribute in Icinga 1.x: $HOSTADDRESS$ In Icinga 2 you'd just use the following macro to access all `address` attributes (even overridden from the service objects): $address$ #### Manual Config Migration Hints for Runtime Custom Attributes Custom variables from Icinga 1.x are available as Icinga 2 custom attributes. define command { command_name test_customvar command_line echo "Host CV: $_HOSTCVTEST$ Service CV: $_SERVICECVTEST$\n" } define host { host_name localhost1 check_command test_customvar use generic-host _CVTEST host cv value } define service { service_description service1 host_name localhost1 check_command test_customvar use generic-service _CVTEST service cv value } Can be written as the following in Icinga 2: object CheckCommand "test_customvar" { import "plugin-check-command" command = "echo "Host CV: $host.vars.CVTEST$ Service CV: $service.vars.CVTEST$\n"" } object Host "localhost1" { import "generic-host" check_command = "test_customvar" vars.CVTEST = "host cv value" } object Service "service1" { host_name = "localhost1" check_command = "test_customvar" vars.CVTEST = "service cv value" } If you are just defining `$CVTEST$` in your command definition its value depends on the execution scope - the host check command will fetch the host attribute value of `vars.CVTEST` while the service check command resolves its value to the service attribute attribute `vars.CVTEST`. > **Note** > > Custom attributes in Icinga 2 are case-sensitive. `vars.CVTEST` is not the same as `vars.CvTest`. #### Manual Config Migration Hints for Contacts (Users) Contacts in Icinga 1.x act as users in Icinga 2, but do not have any notification commands specified. This migration part is explained in the [next chapter](19-migrating-from-icinga-1x.md#manual-config-migration-hints-notifications). define contact{ contact_name testconfig-user use generic-user alias Icinga Test User service_notification_options c,f,s,u email icinga@localhost } The `service_notification_options` can be [mapped](19-migrating-from-icinga-1x.md#manual-config-migration-hints-notification-filters) into generic `state` and `type` filters, if additional notification filtering is required. `alias` gets renamed to `display_name`. object User "testconfig-user" { import "generic-user" display_name = "Icinga Test User" email = "icinga@localhost" } This user can be put into usergroups (former contactgroups) or referenced in newly migration notification objects. #### Manual Config Migration Hints for Notifications If you are migrating a host or service notification, you'll need to extract the following information from your existing Icinga 1.x configuration objects * host/service attribute `contacts` and `contact_groups` * host/service attribute `notification_options` * host/service attribute `notification_period` * host/service attribute `notification_interval` The clean approach is to refactor your current contacts and their notification command methods into a generic strategy * host or service has a notification type (for example mail) * which contacts (users) are notified by mail? * do the notification filters, periods, intervals still apply for them? (do a cleanup during migration) * assign users and groups to these notifications * Redesign the notifications into generic [apply rules](3-monitoring-basics.md#using-apply-notifications) The ugly workaround solution could look like this: Extract all contacts from the remaining groups, and create a unique list. This is required for determining the host and service notification commands involved. * contact attributes `host_notification_commands` and `service_notification_commands` (can be a comma separated list) * get the command line for each notification command and store them for later * create a new notification name and command name Generate a new notification object based on these values. Import the generic template based on the type (`host` or `service`). Assign it to the host or service and set the newly generated notification command name as `command` attribute. object Notification "" { import "mail-host-notification" host_name = "" command = "" Convert the `notification_options` attribute from Icinga 1.x to Icinga 2 `states` and `types`. Details [here](19-migrating-from-icinga-1x.md#manual-config-migration-hints-notification-filters). Add the notification period. states = [ OK, Warning, Critical ] types = [ Recovery, Problem, Custom ] period = "24x7" The current contact acts as `users` attribute. users = [ "" ] } Do this in a loop for all notification commands (depending if host or service contact). Once done, dump the collected notification commands. The result of this migration are lots of unnecessary notification objects and commands but it will unroll the Icinga 1.x logic into the revamped Icinga 2 notification object schema. If you are looking for code examples, try [LConf](https://www.netways.org). #### Manual Config Migration Hints for Notification Filters Icinga 1.x defines all notification filters in an attribute called `notification_options`. Using Icinga 2 you will have to split these values into the `states` and `types` attributes. > **Note** > > `Recovery` type requires the `Ok` state. > `Custom` and `Problem` should always be set as `type` filter. Icinga 1.x option | Icinga 2 state | Icinga 2 type ----------------------|-----------------------|------------------- o | OK (Up for hosts) | w | Warning | Problem c | Critical | Problem u | Unknown | Problem d | Down | Problem s | . | DowntimeStart / DowntimeEnd / DowntimeRemoved r | Ok | Recovery f | . | FlappingStart / FlappingEnd n | 0 (none) | 0 (none) . | . | Custom #### Manual Config Migration Hints for Escalations Escalations in Icinga 1.x are a bit tricky. By default service escalations can be applied to hosts and hostgroups and require a defined service object. The following example applies a service escalation to the service `dep_svc01` and all hosts in the `hg_svcdep2` hostgroup. The default `notification_interval` is set to `10` minutes notifying the `cg_admin` contact. After 20 minutes (`10*2`, notification_interval * first_notification) the notification is escalated to the `cg_ops` contactgroup until 60 minutes (`10*6`) have passed. define service { service_description dep_svc01 host_name dep_hostsvc01,dep_hostsvc03 check_command test2 use generic-service notification_interval 10 contact_groups cg_admin } define hostgroup { hostgroup_name hg_svcdep2 members dep_hostsvc03 } # with hostgroup_name and service_description define serviceescalation { hostgroup_name hg_svcdep2 service_description dep_svc01 first_notification 2 last_notification 6 contact_groups cg_ops } In Icinga 2 the service and hostgroup definition will look quite the same. Save the `notification_interval` and `contact_groups` attribute for an additional notification. apply Service "dep_svc01" { import "generic-service" check_command = "test2" assign where host.name == "dep_hostsvc01" assign where host.name == "dep_hostsvc03" } object HostGroup "hg_svcdep2" { assign where host.name == "dep_hostsvc03" } apply Notification "email" to Service { import "service-mail-notification" interval = 10m user_groups = [ "cg_admin" ] assign where service.name == "dep_svc01" && (host.name == "dep_hostsvc01" || host.name == "dep_hostsvc03") } Calculate the begin and end time for the newly created escalation notification: * begin = first_notification * notification_interval = 2 * 10m = 20m * end = last_notification * notification_interval = 6 * 10m = 60m = 1h Assign the notification escalation to the service `dep_svc01` on all hosts in the hostgroup `hg_svcdep2`. apply Notification "email-escalation" to Service { import "service-mail-notification" interval = 10m user_groups = [ "cg_ops" ] times = { begin = 20m end = 1h } assign where service.name == "dep_svc01" && "hg_svcdep2" in host.groups } The assign rule could be made more generic and the notification be applied to more than just this service belonging to hosts in the matched hostgroup. > **Note** > > When the notification is escalated, Icinga 1.x suppresses notifications to the default contacts. > In Icinga 2 an escalation is an additional notification with a defined begin and end time. The > `email` notification will continue as normal. #### Manual Config Migration Hints for Dependencies There are some dependency examples already in the [basics chapter](3-monitoring-basics.md#dependencies). Dependencies in Icinga 1.x can be confusing in terms of which host/service is the parent and which host/service acts as the child. While Icinga 1.x defines `notification_failure_criteria` and `execution_failure_criteria` as dependency filters, this behaviour has changed in Icinga 2. There is no 1:1 migration but generally speaking the state filter defined in the `execution_failure_criteria` defines the Icinga 2 `state` attribute. If the state filter matches, you can define whether to disable checks and notifications or not. The following example describes service dependencies. If you migrate from Icinga 1.x you will only want to use the classic `Host-to-Host` and `Service-to-Service` dependency relationships. define service { service_description dep_svc01 hostgroup_name hg_svcdep1 check_command test2 use generic-service } define service { service_description dep_svc02 hostgroup_name hg_svcdep2 check_command test2 use generic-service } define hostgroup { hostgroup_name hg_svcdep2 members host2 } define host{ use linux-server-template host_name host1 address 192.168.1.10 } # with hostgroup_name and service_description define servicedependency { host_name host1 dependent_hostgroup_name hg_svcdep2 service_description dep_svc01 dependent_service_description * execution_failure_criteria u,c notification_failure_criteria w,u,c inherits_parent 1 } Map the dependency attributes accordingly. Icinga 1.x | Icinga 2 ----------------------|--------------------- host_name | parent_host_name dependent_host_name | child_host_name (used in assign/ignore) dependent_hostgroup_name | all child hosts in group (used in assign/ignore) service_description | parent_service_name dependent_service_description | child_service_name (used in assign/ignore) And migrate the host and services. object Host "host1" { import "linux-server-template" address = "192.168.1.10" } object HostGroup "hg_svcdep2" { assign where host.name == "host2" } apply Service "dep_svc01" { import "generic-service" check_command = "test2" assign where "hp_svcdep1" in host.groups } apply Service "dep_svc02" { import "generic-service" check_command = "test2" assign where "hp_svcdep2" in host.groups } When it comes to the `execution_failure_criteria` and `notification_failure_criteria` attribute migration, you will need to map the most common values, in this example `u,c` (`Unknown` and `Critical` will cause the dependency to fail). Therefore the `Dependency` should be ok on Ok and Warning. `inherits_parents` is always enabled. apply Dependency "all-svc-for-hg-hg_svcdep2-on-host1-dep_svc01" to Service { parent_host_name = "host1" parent_service_name = "dep_svc01" states = [ Ok, Warning ] disable_checks = true disable_notifications = true assign where "hg_svcdep2" in host.groups } Host dependencies are explained in the [next chapter](19-migrating-from-icinga-1x.md#manual-config-migration-hints-host-parents). #### Manual Config Migration Hints for Host Parents Host parents from Icinga 1.x are migrated into `Host-to-Host` dependencies in Icinga 2. The following example defines the `vmware-master` host as parent host for the guest virtual machines `vmware-vm1` and `vmware-vm2`. By default all hosts in the hostgroup `vmware` should get the parent assigned. This isn't really solvable with Icinga 1.x parents, but only with host dependencies. define host{ use linux-server-template host_name vmware-master hostgroups vmware address 192.168.1.10 } define host{ use linux-server-template host_name vmware-vm1 hostgroups vmware address 192.168.27.1 parents vmware-master } define host{ use linux-server-template host_name vmware-vm2 hostgroups vmware address 192.168.28.1 parents vmware-master } By default all hosts in the hostgroup `vmware` should get the parent assigned (but not the `vmware-master` host itself). This isn't really solvable with Icinga 1.x parents, but only with host dependencies as shown below: define hostdependency { dependent_hostgroup_name vmware dependent_host_name !vmware-master host_name vmware-master inherits_parent 1 notification_failure_criteria d,u execution_failure_criteria d,u dependency_period testconfig-24x7 } When migrating to Icinga 2, the parents must be changed to a newly created host dependency. Map the following attributes Icinga 1.x | Icinga 2 ----------------------|--------------------- host_name | parent_host_name dependent_host_name | child_host_name (used in assign/ignore) dependent_hostgroup_name | all child hosts in group (used in assign/ignore) The Icinga 2 configuration looks like this: object Host "vmware-master" { import "linux-server-template" groups += [ "vmware" ] address = "192.168.1.10" vars.is_vmware_master = true } object Host "vmware-vm1" { import "linux-server-template" groups += [ "vmware" ] address = "192.168.27.1" } object Host "vmware-vm2" { import "linux-server-template" groups += [ "vmware" ] address = "192.168.28.1" } apply Dependency "vmware-master" to Host { parent_host_name = "vmware-master" assign where "vmware" in host.groups ignore where host.vars.is_vmware_master ignore where host.name == "vmware-master" } For easier identification you could add the `vars.is_vmware_master` attribute to the `vmware-master` host and let the dependency ignore that instead of the hardcoded host name. That's different to the Icinga 1.x example and a best practice hint only. #### Manual Config Migration Hints for Distributed Setups * Icinga 2 does not use active/passive instances calling OSCP commands and requiring the NSCA daemon for passing check results between instances. * Icinga 2 does not support any 1.x NEB addons for check load distribution * If your current setup consists of instances distributing the check load, you should consider building a [load distribution](13-distributed-monitoring-ha.md#cluster-scenarios-load-distribution) setup with Icinga 2. * If your current setup includes active/passive clustering with external tools like Pacemaker/DRBD consider the [High Availability](13-distributed-monitoring-ha.md#cluster-scenarios-high-availability) setup. * If you have build your own custom configuration deployment and check result collecting mechanism you should re-design your setup and re-evaluate your requirements, and how they may be fulfilled using the Icinga 2 cluster capabilities. ## Differences between Icinga 1.x and 2 ### Configuration Format Icinga 1.x supports two configuration formats: key-value-based settings in the `icinga.cfg` configuration file and object-based in included files (`cfg_dir`, `cfg_file`). The path to the `icinga.cfg` configuration file must be passed to the Icinga daemon at startup. icinga.cfg: enable_notifications=1 objects.cfg: define service { notifications_enabled 0 } Icinga 2 supports objects and (global) variables, but does not make a difference if it's the main configuration file, or any included file. icinga2.conf: const EnableNotifications = true object Service "test" { enable_notifications = false } #### Sample Configuration and ITL While Icinga 1.x ships sample configuration and templates spread in various object files, Icinga 2 moves all templates into the Icinga Template Library (ITL) and includes them in the sample configuration. Additional plugin check commands are shipped with Icinga 2 as well. The ITL will be updated on every release and must not be edited by the user. There are still generic templates available for your convenience which may or may not be re-used in your configuration. For instance, `generic-service` includes all required attributes except `check_command` for a service. Sample configuration files are located in the `conf.d/` directory which is included in `icinga2.conf` by default. > **Note** > > Add your own custom templates in the `conf.d/` directory as well, e.g. inside > the [templates.conf](4-configuring-icinga-2.md#templates-conf) file. ### Main Config File In Icinga 1.x there are many global configuration settings available in `icinga.cfg`. Icinga 2 only uses a small set of [global constants](20-language-reference.md#constants) allowing you to specify certain different setting such as the `NodeName` in a cluster scenario. Aside from that, the [icinga2.conf](4-configuring-icinga-2.md#icinga2-conf) should take care of including global constants, enabled [features](8-cli-commands.md#features) and the object configuration. ### Include Files and Directories In Icinga 1.x the `icinga.cfg` file contains `cfg_file` and `cfg_dir` directives. The `cfg_dir` directive recursively includes all files with a `.cfg` suffix in the given directory. Only absolute paths may be used. The `cfg_file` and `cfg_dir` directives can include the same file twice which leads to configuration errors in Icinga 1.x. cfg_file=/etc/icinga/objects/commands.cfg cfg_dir=/etc/icinga/objects Icinga 2 supports wildcard includes and relative paths, e.g. for including `conf.d/*.conf` in the same directory. include "conf.d/*.conf" If you want to include files and directories recursively, you need to define a separate option and add the directory and an optional pattern. include_recursive "conf.d" A global search path for includes is available for advanced features like the Icinga Template Library (ITL) or additional monitoring plugins check command configuration. include include By convention the `.conf` suffix is used for Icinga 2 configuration files. ### Resource File and Global Macros Global macros such as for the plugin directory, usernames and passwords can be set in the `resource.cfg` configuration file in Icinga 1.x. By convention the `USER1` macro is used to define the directory for the plugins. Icinga 2 uses global constants instead. In the default config these are set in the `constants.conf` configuration file: /** * This file defines global constants which can be used in * the other configuration files. At a minimum the * PluginDir constant should be defined. */ const PluginDir = "/usr/lib/nagios/plugins" [Global macros](20-language-reference.md#constants) can only be defined once. Trying to modify a global constant will result in an error. ### Configuration Comments In Icinga 1.x comments are made using a leading hash (`#`) or a semi-colon (`;`) for inline comments. In Icinga 2 comments can either be encapsulated by `/*` and `*/` (allowing for multi-line comments) or starting with two slashes (`//`). A leading hash (`#`) could also be used. ### Object Names Object names must not contain an exclamation mark (`!`). Use the `display_name` attribute to specify user-friendly names which should be shown in UIs (supported by Icinga Web 2 for example). Object names are not specified using attributes (e.g. `service_description` for services) like in Icinga 1.x but directly after their type definition. define service { host_name localhost service_description ping4 } object Service "ping4" { host_name = "localhost" } ### Templates In Icinga 1.x templates are identified using the `register 0` setting. Icinga 2 uses the `template` identifier: template Service "ping4-template" { } Icinga 1.x objects inherit from templates using the `use` attribute. Icinga 2 uses the keyword `import` with template names in double quotes. define service { service_description testservice use tmpl1,tmpl2,tmpl3 } object Service "testservice" { import "tmpl1" import "tmpl2" import "tmpl3" } The last template overrides previously set values. ### Object attributes Icinga 1.x separates attribute and value pairs with whitespaces/tabs. Icinga 2 requires an equal sign (=) between them. define service { check_interval 5 } object Service "test" { check_interval = 5m } Please note that the default time value is seconds, if no duration literal is given. `check_interval = 5` behaves the same as `check_interval = 5s`. All strings require double quotes in Icinga 2. Therefore a double quote must be escaped by a backslash (e.g. in command line). If an attribute identifier starts with a number, it must be enclosed in double quotes as well. #### Alias vs. Display Name In Icinga 1.x a host can have an `alias` and a `display_name` attribute used for a more descriptive name. A service only can have a `display_name` attribute. The `alias` is used for group, timeperiod, etc. objects too. Icinga 2 only supports the `display_name` attribute which is also taken into account by Icinga web interfaces. ### Custom Attributes Icinga 2 allows you to define custom attributes in the `vars` dictionary. The `notes`, `notes_url`, `action_url`, `icon_image`, `icon_image_alt` attributes for host and service objects are still available in Icinga 2. `2d_coords` and `statusmap_image` are not supported in Icinga 2. #### Custom Variables Icinga 1.x custom variable attributes must be prefixed using an underscore (`_`). In Icinga 2 these attributes must be added to the `vars` dictionary as custom attributes. vars.dn = "cn=icinga2-dev-host,ou=icinga,ou=main,ou=IcingaConfig,ou=LConf,dc=icinga,dc=org" vars.cv = "my custom cmdb description" These custom attributes are also used as [command parameters](3-monitoring-basics.md#command-passing-parameters). While Icinga 1.x only supports numbers and strings as custom attribute values, Icinga 2 extends that to arrays and (nested) dictionaries. For more details look [here](3-monitoring-basics.md#custom-attributes). ### Host Service Relation In Icinga 1.x a service object is associated with a host by defining the `host_name` attribute in the service definition. Alternate methods refer to `hostgroup_name` or behaviour changing regular expression. The preferred way of associating hosts with services in Icinga 2 is by using the [apply](3-monitoring-basics.md#using-apply) keyword. Direct object relations between a service and a host still allow you to use the `host_name` [Service](6-object-types.md#objecttype-service) object attribute. ### Users Contacts have been renamed to users (same for groups). A contact does not only provide (custom) attributes and notification commands used for notifications, but is also used for authorization checks in Icinga 1.x. Icinga 2 changes that behavior and makes the user an attribute provider only. These attributes can be accessed using [runtime macros](3-monitoring-basics.md#runtime-macros) inside notification command definitions. In Icinga 2 notification commands are not directly associated with users. Instead the notification command is specified inside `Notification` objects next to user and user group relations. The `StatusDataWriter`, `IdoMySqlConnection` and `LivestatusListener` types will provide the contact and contactgroups attributes for services for compatibility reasons. These values are calculated from all services, their notifications, and their users. ### Macros Various object attributes and runtime variables can be accessed as macros in commands in Icinga 1.x - Icinga 2 supports all required [custom attributes](3-monitoring-basics.md#custom-attributes). #### Command Arguments If you have previously used Icinga 1.x you may already be familiar with user and argument definitions (e.g., `USER1` or `ARG1`). Unlike in Icinga 1.x the Icinga 2 custom attributes may have arbitrary names and arguments are no longer specified in the `check_command` setting. In Icinga 1.x arguments are specified in the `check_command` attribute and are separated from the command name using an exclamation mark (`!`). Please check the migration hints for a detailed [migration example](19-migrating-from-icinga-1x.md#manual-config-migration-hints-check-command-arguments). > **Note** > > The Classic UI feature named `Command Expander` does not work with Icinga 2. #### Environment Macros The global configuration setting `enable_environment_macros` does not exist in Icinga 2. Macros exported into the [environment](3-monitoring-basics.md#command-environment-variables) can be set using the `env` attribute in command objects. #### Runtime Macros Icinga 2 requires an object specific namespace when accessing configuration and stateful runtime macros. Custom attributes can be accessed directly. If a runtime macro from Icinga 1.x is not listed here, it is not supported by Icinga 2. Changes to user (contact) runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- CONTACTNAME | user.name CONTACTALIAS | user.display_name CONTACTEMAIL | user.email CONTACTPAGER | user.pager `CONTACTADDRESS*` is not supported but can be accessed as `$user.vars.address1$` if set. Changes to service runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- SERVICEDESC | service.name SERVICEDISPLAYNAME | service.display_name SERVICECHECKCOMMAND | service.check_command SERVICESTATE | service.state SERVICESTATEID | service.state_id SERVICESTATETYPE | service.state_type SERVICEATTEMPT | service.check_attempt MAXSERVICEATTEMPT | service.max_check_attempts LASTSERVICESTATE | service.last_state LASTSERVICESTATEID | service.last_state_id LASTSERVICESTATETYPE | service.last_state_type LASTSERVICESTATECHANGE | service.last_state_change SERVICEDOWNTIME | service.downtime_depth SERVICEDURATIONSEC | service.duration_sec SERVICELATENCY | service.latency SERVICEEXECUTIONTIME | service.execution_time SERVICEOUTPUT | service.output SERVICEPERFDATA | service.perfdata LASTSERVICECHECK | service.last_check SERVICENOTES | service.notes SERVICENOTESURL | service.notes_url SERVICEACTIONURL | service.action_url Changes to host runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- HOSTNAME | host.name HOSTADDRESS | host.address HOSTADDRESS6 | host.address6 HOSTDISPLAYNAME | host.display_name HOSTALIAS | (use `host.display_name` instead) HOSTCHECKCOMMAND | host.check_command HOSTSTATE | host.state HOSTSTATEID | host.state_id HOSTSTATETYPE | host.state_type HOSTATTEMPT | host.check_attempt MAXHOSTATTEMPT | host.max_check_attempts LASTHOSTSTATE | host.last_state LASTHOSTSTATEID | host.last_state_id LASTHOSTSTATETYPE | host.last_state_type LASTHOSTSTATECHANGE | host.last_state_change HOSTDOWNTIME | host.downtime_depth HOSTDURATIONSEC | host.duration_sec HOSTLATENCY | host.latency HOSTEXECUTIONTIME | host.execution_time HOSTOUTPUT | host.output HOSTPERFDATA | host.perfdata LASTHOSTCHECK | host.last_check HOSTNOTES | host.notes HOSTNOTESURL | host.notes_url HOSTACTIONURL | host.action_url TOTALSERVICES | host.num_services TOTALSERVICESOK | host.num_services_ok TOTALSERVICESWARNING | host.num_services_warning TOTALSERVICESUNKNOWN | host.num_services_unknown TOTALSERVICESCRITICAL | host.num_services_critical Changes to command runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- COMMANDNAME | command.name Changes to notification runtime macros Icinga 1.x | Icinga 2 -----------------------|---------------------- NOTIFICATIONTYPE | notification.type NOTIFICATIONAUTHOR | notification.author NOTIFICATIONCOMMENT | notification.comment NOTIFICATIONAUTHORNAME | (use `notification.author`) NOTIFICATIONAUTHORALIAS | (use `notification.author`) Changes to global runtime macros: Icinga 1.x | Icinga 2 -----------------------|---------------------- TIMET | icinga.timet LONGDATETIME | icinga.long_date_time SHORTDATETIME | icinga.short_date_time DATE | icinga.date TIME | icinga.time PROCESSSTARTTIME | icinga.uptime Changes to global statistic macros: Icinga 1.x | Icinga 2 ----------------------------------|---------------------- TOTALHOSTSUP | icinga.num_hosts_up TOTALHOSTSDOWN | icinga.num_hosts_down TOTALHOSTSUNREACHABLE | icinga.num_hosts_unreachable TOTALHOSTSDOWNUNHANDLED | -- TOTALHOSTSUNREACHABLEUNHANDLED | -- TOTALHOSTPROBLEMS | down TOTALHOSTPROBLEMSUNHANDLED | down-(downtime+acknowledged) TOTALSERVICESOK | icinga.num_services_ok TOTALSERVICESWARNING | icinga.num_services_warning TOTALSERVICESCRITICAL | icinga.num_services_critical TOTALSERVICESUNKNOWN | icinga.num_services_unknown TOTALSERVICESWARNINGUNHANDLED | -- TOTALSERVICESCRITICALUNHANDLED | -- TOTALSERVICESUNKNOWNUNHANDLED | -- TOTALSERVICEPROBLEMS | ok+warning+critical+unknown TOTALSERVICEPROBLEMSUNHANDLED | warning+critical+unknown-(downtime+acknowledged) ### External Commands `CHANGE_CUSTOM_CONTACT_VAR` was renamed to `CHANGE_CUSTOM_USER_VAR`. `CHANGE_CONTACT_MODATTR` was renamed to `CHANGE_USER_MODATTR`. The following external commands are not supported: CHANGE_CONTACT_HOST_NOTIFICATION_TIMEPERIOD CHANGE_HOST_NOTIFICATION_TIMEPERIOD CHANGE_SVC_NOTIFICATION_TIMEPERIOD DEL_DOWNTIME_BY_HOSTGROUP_NAME DEL_DOWNTIME_BY_START_TIME_COMMENT DISABLE_ALL_NOTIFICATIONS_BEYOND_HOST DISABLE_CONTACT_HOST_NOTIFICATIONS DISABLE_CONTACT_SVC_NOTIFICATIONS DISABLE_CONTACTGROUP_HOST_NOTIFICATIONS DISABLE_CONTACTGROUP_SVC_NOTIFICATIONS DISABLE_FAILURE_PREDICTION DISABLE_HOST_AND_CHILD_NOTIFICATIONS DISABLE_HOST_FRESHNESS_CHECKS DISABLE_NOTIFICATIONS_EXPIRE_TIME DISABLE_SERVICE_FRESHNESS_CHECKS ENABLE_ALL_NOTIFICATIONS_BEYOND_HOST ENABLE_CONTACT_HOST_NOTIFICATIONS ENABLE_CONTACT_SVC_NOTIFICATIONS ENABLE_CONTACTGROUP_HOST_NOTIFICATIONS ENABLE_CONTACTGROUP_SVC_NOTIFICATIONS ENABLE_FAILURE_PREDICTION ENABLE_HOST_AND_CHILD_NOTIFICATIONS ENABLE_HOST_FRESHNESS_CHECKS ENABLE_SERVICE_FRESHNESS_CHECKS READ_STATE_INFORMATION SAVE_STATE_INFORMATION SCHEDULE_AND_PROPAGATE_HOST_DOWNTIME SCHEDULE_AND_PROPAGATE_TRIGGERED_HOST_DOWNTIME SET_HOST_NOTIFICATION_NUMBER SET_SVC_NOTIFICATION_NUMBER START_ACCEPTING_PASSIVE_HOST_CHECKS START_ACCEPTING_PASSIVE_SVC_CHECKS START_OBSESSING_OVER_HOST START_OBSESSING_OVER_HOST_CHECKS START_OBSESSING_OVER_SVC START_OBSESSING_OVER_SVC_CHECKS STOP_ACCEPTING_PASSIVE_HOST_CHECKS STOP_ACCEPTING_PASSIVE_SVC_CHECKS STOP_OBSESSING_OVER_HOST STOP_OBSESSING_OVER_HOST_CHECKS STOP_OBSESSING_OVER_SVC STOP_OBSESSING_OVER_SVC_CHECKS ### Asynchronous Event Execution Unlike Icinga 1.x, Icinga 2 does not block when it waits for a command being executed - be it a check, notification, event handler, performance data writing update, etc. That way you'll recognize low to zero (check) latencies with Icinga 2. ### Checks #### Check Output Icinga 2 does not make a difference between `output` (first line) and `long_output` (remaining lines) like in Icinga 1.x. Performance Data is provided separately. There is no output length restriction as known from Icinga 1.x using an [8KB static buffer](http://docs.icinga.org/latest/en/pluginapi.html#outputlengthrestrictions). The `StatusDataWriter`, `IdoMysqlConnection` and `LivestatusListener` types split the raw output into `output` (first line) and `long_output` (remaining lines) for compatibility reasons. #### Initial State Icinga 1.x uses the `max_service_check_spread` setting to specify a timerange where the initial state checks must have happened. Icinga 2 will use the `retry_interval` setting instead and `check_interval` divided by 5 if `retry_interval` is not defined. ### Comments Icinga 2 doesn't support non-persistent comments. ### Commands Unlike in Icinga 1.x there are three different command types in Icinga 2: `CheckCommand`, `NotificationCommand`, and `EventCommand`. For example in Icinga 1.x it is possible to accidently use a notification command as an event handler which might cause problems depending on which runtime macros are used in the notification command. In Icinga 2 these command types are separated and will generate an error on configuration validation if used in the wrong context. While Icinga 2 still supports the complete command line in command objects, it's recommended to use [command arguments](3-monitoring-basics.md#command-arguments) with optional and conditional command line parameters instead. It's also possible to define default argument values for the command itself which can be overridden by the host or service then. #### Command Timeouts In Icinga 1.x there were two global options defining a host and service check timeout. This was essentially bad when there only was a couple of check plugins requiring some command timeouts to be extended. Icinga 2 allows you to specify the command timeout directly on the command. So if your VMVware check plugin takes 15 minutes, [increase the timeout](6-object-types.md#objecttype-checkcommand) accordingly. ### Groups In Icinga 2 hosts, services, and users are added to groups using the `groups` attribute in the object. The old way of listing all group members in the group's `members` attribute is available through `assign where` and `ignore where` expressions by using [group assign](3-monitoring-basics.md#group-assign-intro). object Host "web-dev" { import "generic-host" } object HostGroup "dev-hosts" { display_name = "Dev Hosts" assign where match("*-dev", host.name) } #### Add Service to Hostgroup where Host is Member In order to associate a service with all hosts in a host group the [apply](3-monitoring-basics.md#using-apply) keyword can be used: apply Service "ping4" { import "generic-service" check_command = "ping4" assign where "dev-hosts" in host.groups } ### Notifications Notifications are a new object type in Icinga 2. Imagine the following notification configuration problem in Icinga 1.x: * Service A should notify contact X via SMS * Service B should notify contact X via Mail * Service C should notify contact Y via Mail and SMS * Contact X and Y should also be used for authorization (e.g. in Classic UI) The only way achieving a semi-clean solution is to * Create contact X-sms, set service_notification_command for sms, assign contact to service A * Create contact X-mail, set service_notification_command for mail, assign contact to service B * Create contact Y, set service_notification_command for sms and mail, assign contact to service C * Create contact X without notification commands, assign to service A and B Basically you are required to create duplicated contacts for either each notification method or used for authorization only. Icinga 2 attempts to solve that problem in this way * Create user X, set SMS and Mail attributes, used for authorization * Create user Y, set SMS and Mail attributes, used for authorization * Create notification A-SMS, set command for sms, add user X, assign notification A-SMS to service A * Create notification B-Mail, set command for mail, add user X, assign notification Mail to service B * Create notification C-SMS, set command for sms, add user Y, assign notification C-SMS to service C * Create notification C-Mail, set command for mail, add user Y, assign notification C-Mail to service C Previously in Icinga 1.x it looked like this: service -> (contact, contactgroup) -> notification command In Icinga 2 it will look like this: Service -> Notification -> NotificationCommand -> User, UserGroup #### Escalations Escalations in Icinga 1.x require a separated object matching on existing objects. Escalations happen between a defined start and end time which is calculated from the notification_interval: start = notification start + (notification_interval * first_notification) end = notification start + (notification_interval * last_notification) In theory first_notification and last_notification can be set to readable numbers. In practice users are manipulating those attributes in combination with notification_interval in order to get a start and end time. In Icinga 2 the notification object can be used as notification escalation if the start and end times are defined within the 'times' attribute using duration literals (e.g. 30m). The Icinga 2 escalation does not replace the current running notification. In Icinga 1.x it's required to copy the contacts from the service notification to the escalation to guarantee the normal notifications once an escalation happens. That's not necessary with Icinga 2 only requiring an additional notification object for the escalation itself. #### Notification Options Unlike Icinga 1.x with the 'notification_options' attribute with comma-separated state and type filters, Icinga 2 uses two configuration attributes for that. All state and type filter use long names OR'd with a pipe together notification_options w,u,c,r,f,s states = [ Warning, Unknown, Critical ] filters = [ Problem, Recovery, FlappingStart, FlappingEnd, DowntimeStart, DowntimeEnd, DowntimeRemoved ] Icinga 2 adds more fine-grained type filters for acknowledgements, downtime, and flapping type (start, end, ...). ### Dependencies and Parents In Icinga 1.x it's possible to define host parents to determine network reachability and keep a host's state unreachable rather than down. Furthermore there are host and service dependencies preventing unnecessary checks and notifications. A host must not depend on a service, and vice versa. All dependencies are configured as separate objects and cannot be set directly on the host or service object. A service can now depend on a host, and vice versa. A service has an implicit dependency (parent) to its host. A host to host dependency acts implicitly as host parent relation. The former `host_name` and `dependent_host_name` have been renamed to `parent_host_name` and `child_host_name` (same for the service attribute). When using apply rules the child attributes may be omitted. For detailed examples on how to use the dependencies please check the [dependencies](3-monitoring-basics.md#dependencies) chapter. Dependencies can be applied to hosts or services using the [apply rules](20-language-reference.md#apply). The `StatusDataWriter`, `IdoMysqlConnection` and `LivestatusListener` types support the Icinga 1.x schema with dependencies and parent attributes for compatibility reasons. ### Flapping The Icinga 1.x flapping detection uses the last 21 states of a service. This value is hardcoded and cannot be changed. The algorithm on determining a flapping state is as follows: flapping value = (number of actual state changes / number of possible state changes) The flapping value is then compared to the low and high flapping thresholds. The algorithm used in Icinga 2 does not store the past states but calculcates the flapping threshold from a single value based on counters and half-life values. Icinga 2 compares the value with a single flapping threshold configuration attribute. ### Check Result Freshness Freshness of check results must be enabled explicitly in Icinga 1.x. The attribute `freshness_threshold` defines the threshold in seconds. Once the threshold is triggered, an active freshness check is executed defined by the `check_command` attribute. Both check methods (active and passive) use the same freshness check method. In Icinga 2 active check freshness is determined by the `check_interval` attribute and no incoming check results in that period of time (last check + check interval). Passive check freshness is calculated from the `check_interval` attribute if set. There is no extra `freshness_threshold` attribute in Icinga 2. If the freshness checks are invalid, a new service check is forced. ### Real Reload In Nagios / Icinga 1.x a daemon reload does the following: * receive reload signal SIGHUP * stop all events (checks, notifications, etc) * read the configuration from disk and validate all config objects in a single threaded fashion * validation NOT ok: stop the daemon (cannot restore old config state) * validation ok: start with new objects, dump status.dat / ido Unlike Icinga 1.x the Icinga 2 daemon reload does not block any event execution during config validation: * receive reload signal SIGHUP * fork a child process, start configuration validation in parallel work queues * parent process continues with old configuration objects and the event scheduling (doing checks, replicating cluster events, triggering alert notifications, etc.) * validation NOT ok: child process terminates, parent process continues with old configuration state (this is **essential** for the [cluster config synchronisation](13-distributed-monitoring-ha.md#cluster-zone-config-sync)) * validation ok: child process signals parent process to terminate and save its current state (all events until now) into the icinga2 state file * parent process shuts down writing icinga2.state file * child process waits for parent process gone, reads the icinga2 state file and synchronizes all historical and status data * child becomes the new session leader The DB IDO configuration dump and status/historical event updates use a queue not blocking event execution. Same goes for any other enabled feature. The configuration validation itself runs in parallel allowing fast verification checks. That way your monitoring does not stop during a configuration reload. ### State Retention Icinga 1.x uses the `retention.dat` file to save its state in order to be able to reload it after a restart. In Icinga 2 this file is called `icinga2.state`. The format is **not** compatible with Icinga 1.x. ### Logging Icinga 1.x supports syslog facilities and writes its own `icinga.log` log file and archives. These logs are used in Icinga 1.x Classic UI to generate historical reports. Icinga 2 compat library provides the CompatLogger object which writes the icinga.log and archive in Icinga 1.x format in order to stay compatible with Classic UI and other addons. The native Icinga 2 logging facilities are split into three configuration objects: SyslogLogger, FileLogger, StreamLogger. Each of them has their own severity and target configuration. The Icinga 2 daemon log does not log any alerts but is considered an application log only. ### Broker Modules and Features Icinga 1.x broker modules are incompatible with Icinga 2. In order to provide compatibility with Icinga 1.x the functionality of several popular broker modules was implemented for Icinga 2: * IDOUtils * Livestatus * Cluster (allows for high availability and load balancing) ### Distributed Monitoring Icinga 1.x uses the native "obsess over host/service" method which requires the NSCA addon passing the slave's check results passively onto the master's external command pipe. While this method may be used for check load distribution, it does not provide any configuration distribution out-of-the-box. Furthermore comments, downtimes, and other stateful runtime data is not synced between the master and slave nodes. There are addons available solving the check and configuration distribution problems Icinga 1.x distributed monitoring currently suffers from. Icinga 2 implements a new built-in [distributed monitoring architecture](13-distributed-monitoring-ha.md#distributed-monitoring-high-availability), including config and check distribution, IPv4/IPv6 support, SSL certificates and zone support for DMZ. High Availability and load balancing are also part of the Icinga 2 Cluster feature, next to local replay logs on connection loss ensuring that the event history is kept in sync.