2 * Copyright (c) 2010 The WebM project authors. All Rights Reserved.
4 * Use of this source code is governed by a BSD-style license
5 * that can be found in the LICENSE file in the root of the source
6 * tree. An additional intellectual property rights grant can be found
7 * in the file PATENTS. All contributing project authors may
8 * be found in the AUTHORS file in the root of the source tree.
11 #ifndef VP9_ENCODER_VP9_SPEED_FEATURES_H_
12 #define VP9_ENCODER_VP9_SPEED_FEATURES_H_
14 #include "vp9/common/vp9_enums.h"
21 INTRA_ALL = (1 << DC_PRED) |
22 (1 << V_PRED) | (1 << H_PRED) |
23 (1 << D45_PRED) | (1 << D135_PRED) |
24 (1 << D117_PRED) | (1 << D153_PRED) |
25 (1 << D207_PRED) | (1 << D63_PRED) |
27 INTRA_DC = (1 << DC_PRED),
28 INTRA_DC_TM = (1 << DC_PRED) | (1 << TM_PRED),
29 INTRA_DC_H_V = (1 << DC_PRED) | (1 << V_PRED) | (1 << H_PRED),
30 INTRA_DC_TM_H_V = (1 << DC_PRED) | (1 << TM_PRED) | (1 << V_PRED) |
35 INTER_ALL = (1 << NEARESTMV) | (1 << NEARMV) | (1 << ZEROMV) | (1 << NEWMV),
36 INTER_NEAREST = (1 << NEARESTMV),
37 INTER_NEAREST_NEW = (1 << NEARESTMV) | (1 << NEWMV),
38 INTER_NEAREST_ZERO = (1 << NEARESTMV) | (1 << ZEROMV),
39 INTER_NEAREST_NEW_ZERO = (1 << NEARESTMV) | (1 << ZEROMV) | (1 << NEWMV),
40 INTER_NEAREST_NEAR_NEW = (1 << NEARESTMV) | (1 << NEARMV) | (1 << NEWMV),
41 INTER_NEAREST_NEAR_ZERO = (1 << NEARESTMV) | (1 << NEARMV) | (1 << ZEROMV),
45 DISABLE_ALL_INTER_SPLIT = (1 << THR_COMP_GA) |
51 DISABLE_ALL_SPLIT = (1 << THR_INTRA) | DISABLE_ALL_INTER_SPLIT,
53 DISABLE_COMPOUND_SPLIT = (1 << THR_COMP_GA) | (1 << THR_COMP_LA),
55 LAST_AND_INTRA_SPLIT_ONLY = (1 << THR_COMP_GA) |
74 // Allow recode for KF and exceeding maximum frame bandwidth.
75 ALLOW_RECODE_KFMAXBW = 1,
76 // Allow recode only for KF/ARF/GF frames.
77 ALLOW_RECODE_KFARFGF = 2,
78 // Allow recode for all frames based on bitrate constraints.
84 SUBPEL_TREE_PRUNED = 1, // Prunes 1/2-pel searches
85 SUBPEL_TREE_PRUNED_MORE = 2, // Prunes 1/2-pel searches more aggressively
86 SUBPEL_TREE_PRUNED_EVENMORE = 3, // Prunes 1/2- and 1/4-pel searches
87 // Other methods to come
88 } SUBPEL_SEARCH_METHODS;
91 NO_MOTION_THRESHOLD = 0,
92 LOW_MOTION_THRESHOLD = 7
99 } TX_SIZE_SEARCH_METHOD;
103 RELAXED_NEIGHBORING_MIN_MAX = 1,
104 CONSTRAIN_NEIGHBORING_MIN_MAX = 2,
105 STRICT_NEIGHBORING_MIN_MAX = 3
109 // Try the full image with different values.
110 LPF_PICK_FROM_FULL_IMAGE,
111 // Try a small portion of the image with different values.
112 LPF_PICK_FROM_SUBIMAGE,
113 // Estimate the level based on quantizer and frame type
115 // Pick 0 to disable LPF if LPF was enabled last frame
120 // Terminate search early based on distortion so far compared to
121 // qp step, distortion in the neighborhood of the frame, etc.
122 FLAG_EARLY_TERMINATE = 1 << 0,
124 // Skips comp inter modes if the best so far is an intra mode.
125 FLAG_SKIP_COMP_BESTINTRA = 1 << 1,
127 // Skips oblique intra modes if the best so far is an inter mode.
128 FLAG_SKIP_INTRA_BESTINTER = 1 << 3,
130 // Skips oblique intra modes at angles 27, 63, 117, 153 if the best
131 // intra so far is not one of the neighboring directions.
132 FLAG_SKIP_INTRA_DIRMISMATCH = 1 << 4,
134 // Skips intra modes other than DC_PRED if the source variance is small
135 FLAG_SKIP_INTRA_LOWVAR = 1 << 5,
136 } MODE_SEARCH_SKIP_LOGIC;
139 FLAG_SKIP_EIGHTTAP = 1 << EIGHTTAP,
140 FLAG_SKIP_EIGHTTAP_SMOOTH = 1 << EIGHTTAP_SMOOTH,
141 FLAG_SKIP_EIGHTTAP_SHARP = 1 << EIGHTTAP_SHARP,
142 } INTERP_FILTER_MASK;
145 // Search partitions using RD/NONRD criterion
148 // Always use a fixed size partition
153 // Use an arbitrary partitioning scheme based on source variance within
157 // Use non-fixed partitions based on source variance
158 SOURCE_VAR_BASED_PARTITION
159 } PARTITION_SEARCH_TYPE;
162 // Does a dry run to see if any of the contexts need to be updated or not,
163 // before the final run.
166 // No dry run, also only half the coef contexts and bands are updated.
167 // The rest are not updated at all.
171 typedef struct MV_SPEED_FEATURES {
172 // Motion search method (Diamond, NSTEP, Hex, Big Diamond, Square, etc).
173 SEARCH_METHODS search_method;
175 // This parameter controls which step in the n-step process we start at.
176 // It's changed adaptively based on circumstances.
177 int reduce_first_step_size;
179 // If this is set to 1, we limit the motion search range to 2 times the
180 // largest motion vector found in the last frame.
181 int auto_mv_step_size;
183 // Subpel_search_method can only be subpel_tree which does a subpixel
184 // logarithmic search that keeps stepping at 1/2 pixel units until
185 // you stop getting a gain, and then goes on to 1/4 and repeats
186 // the same process. Along the way it skips many diagonals.
187 SUBPEL_SEARCH_METHODS subpel_search_method;
189 // Maximum number of steps in logarithmic subpel search before giving up.
190 int subpel_iters_per_step;
192 // Control when to stop subpel search
193 int subpel_force_stop;
195 // This variable sets the step_param used in full pel motion search.
196 int fullpel_search_step_param;
199 typedef struct SPEED_FEATURES {
200 MV_SPEED_FEATURES mv;
202 // Frame level coding parameter update
203 int frame_parameter_update;
205 RECODE_LOOP_TYPE recode_loop;
207 // Trellis (dynamic programming) optimization of quantized values (+1, 0).
208 int optimize_coefficients;
210 // Always set to 0. If on it enables 0 cost background transmission
211 // (except for the initial transmission of the segmentation). The feature is
212 // disabled because the addition of very large block sizes make the
213 // backgrounds very to cheap to encode, and the segmentation we have
215 int static_segmentation;
217 // If 1 we iterate finding a best reference for 2 ref frames together - via
218 // a log search that iterates 4 times (check around mv for last for best
219 // error of combined predictor then check around mv for alt). If 0 we
220 // we just use the best motion vector found for each frame by itself.
221 BLOCK_SIZE comp_inter_joint_search_thresh;
223 // This variable is used to cap the maximum number of times we skip testing a
224 // mode to be evaluated. A high value means we will be faster.
225 int adaptive_rd_thresh;
227 // Enables skipping the reconstruction step (idct, recon) in the
228 // intermediate steps assuming the last frame didn't have too many intra
229 // blocks and the q is less than a threshold.
231 int skip_encode_frame;
232 // Speed feature to allow or disallow skipping of recode at block
233 // level within a frame.
234 int allow_skip_recode;
236 // Coefficient probability model approximation step size
237 int coeff_prob_appx_step;
239 // The threshold is to determine how slow the motino is, it is used when
240 // use_lastframe_partitioning is set to LAST_FRAME_PARTITION_LOW_MOTION
241 MOTION_THRESHOLD lf_motion_threshold;
243 // Determine which method we use to determine transform size. We can choose
244 // between options like full rd, largest for prediction size, largest
245 // for intra and model coefs for the rest.
246 TX_SIZE_SEARCH_METHOD tx_size_search_method;
248 // Low precision 32x32 fdct keeps everything in 16 bits and thus is less
249 // precise but significantly faster than the non lp version.
252 // After looking at the first set of modes (set by index here), skip
253 // checking modes for reference frames that don't match the reference frame
254 // of the best so far.
257 // TODO(JBB): Remove this.
258 int reference_masking;
260 PARTITION_SEARCH_TYPE partition_search_type;
262 // Used if partition_search_type = FIXED_SIZE_PARTITION
263 BLOCK_SIZE always_this_block_size;
265 // Skip rectangular partition test when partition type none gives better
266 // rd than partition type split.
267 int less_rectangular_check;
269 // Disable testing non square partitions. (eg 16x32)
270 int use_square_partition_only;
272 // Sets min and max partition sizes for this 64x64 region based on the
273 // same 64x64 in last encoded frame, and the left and above neighbor.
274 AUTO_MIN_MAX_MODE auto_min_max_partition_size;
276 // Min and max partition size we enable (block_size) as per auto
277 // min max, but also used by adjust partitioning, and pick_partitioning.
278 BLOCK_SIZE default_min_partition_size;
279 BLOCK_SIZE default_max_partition_size;
281 // Whether or not we allow partitions one smaller or one greater than the last
282 // frame's partitioning. Only used if use_lastframe_partitioning is set.
283 int adjust_partitioning_from_last_frame;
285 // How frequently we re do the partitioning from scratch. Only used if
286 // use_lastframe_partitioning is set.
287 int last_partitioning_redo_frequency;
289 // Disables sub 8x8 blocksizes in different scenarios: Choices are to disable
290 // it always, to allow it for only Last frame and Intra, disable it for all
291 // inter modes or to enable it always.
292 int disable_split_mask;
294 // TODO(jingning): combine the related motion search speed features
295 // This allows us to use motion search at other sizes as a starting
296 // point for this motion search and limits the search range around it.
297 int adaptive_motion_search;
299 int schedule_mode_search;
301 // Allows sub 8x8 modes to use the prediction filter that was determined
302 // best for 8x8 mode. If set to 0 we always re check all the filters for
303 // sizes less than 8x8, 1 means we check all filter modes if no 8x8 filter
304 // was selected, and 2 means we use 8 tap if no 8x8 filter mode was selected.
305 int adaptive_pred_interp_filter;
307 // Adaptive prediction mode search
308 int adaptive_mode_search;
310 // Chessboard pattern prediction filter type search
311 int cb_pred_filter_search;
313 int cb_partition_search;
315 int motion_field_mode_search;
317 int alt_ref_search_fp;
319 // Fast quantization process path
322 // Use finer quantizer in every other few frames that run variable block
323 // partition type search.
324 int force_frame_boost;
326 // Maximally allowed base quantization index fluctuation.
327 int max_delta_qindex;
329 // Implements various heuristics to skip searching modes
330 // The heuristics selected are based on flags
331 // defined in the MODE_SEARCH_SKIP_HEURISTICS enum
332 unsigned int mode_search_skip_flags;
334 // A source variance threshold below which filter search is disabled
335 // Choose a very large value (UINT_MAX) to use 8-tap always
336 unsigned int disable_filter_search_var_thresh;
338 // These bit masks allow you to enable or disable intra modes for each
339 // transform size separately.
340 int intra_y_mode_mask[TX_SIZES];
341 int intra_uv_mode_mask[TX_SIZES];
343 // These bit masks allow you to enable or disable intra modes for each
344 // prediction block size separately.
345 int intra_y_mode_bsize_mask[BLOCK_SIZES];
347 // This variable enables an early break out of mode testing if the model for
348 // rd built from the prediction signal indicates a value that's much
349 // higher than the best rd we've seen so far.
352 // This enables us to use an estimate for intra rd based on dc mode rather
353 // than choosing an actual uv mode in the stage of encoding before the actual
355 int use_uv_intra_rd_estimate;
357 // This feature controls how the loop filter level is determined.
358 LPF_PICK_METHOD lpf_pick;
360 // This feature limits the number of coefficients updates we actually do
361 // by only looking at counts from 1/2 the bands.
362 FAST_COEFF_UPDATE use_fast_coef_updates;
364 // This flag controls the use of non-RD mode decision.
365 int use_nonrd_pick_mode;
367 // A binary mask indicating if NEARESTMV, NEARMV, ZEROMV, NEWMV
368 // modes are used in order from LSB to MSB for each BLOCK_SIZE.
369 int inter_mode_mask[BLOCK_SIZES];
371 // This feature controls whether we do the expensive context update and
372 // calculation in the rd coefficient costing loop.
373 int use_fast_coef_costing;
375 // This feature controls the tolerence vs target used in deciding whether to
376 // recode a frame. It has no meaning if recode is disabled.
377 int recode_tolerance;
379 // This variable controls the maximum block size where intra blocks can be
380 // used in inter frames.
381 // TODO(aconverse): Fold this into one of the other many mode skips
382 BLOCK_SIZE max_intra_bsize;
384 // The frequency that we check if SOURCE_VAR_BASED_PARTITION or
385 // FIXED_PARTITION search type should be used.
386 int search_type_check_frequency;
388 // When partition is pre-set, the inter prediction result from pick_inter_mode
389 // can be reused in final block encoding process. It is enabled only for real-
390 // time mode speed 6.
391 int reuse_inter_pred_sby;
393 // This variable sets the encode_breakout threshold. Currently, it is only
394 // enabled in real time mode.
395 int encode_breakout_thresh;
397 // default interp filter choice
398 INTERP_FILTER default_interp_filter;
400 // Early termination in transform size search, which only applies while
401 // tx_size_search_method is USE_FULL_RD.
402 int tx_size_search_breakout;
404 // adaptive interp_filter search to allow skip of certain filter types.
405 int adaptive_interp_filter_search;
407 // mask for skip evaluation of certain interp_filter type.
408 INTERP_FILTER_MASK interp_filter_search_mask;
410 // Partition search early breakout thresholds.
411 int64_t partition_search_breakout_dist_thr;
412 int partition_search_breakout_rate_thr;
414 // Allow skipping partition search for still image frame
415 int allow_partition_search_skip;
420 void vp9_set_speed_features_framesize_independent(struct VP9_COMP *cpi);
421 void vp9_set_speed_features_framesize_dependent(struct VP9_COMP *cpi);
427 #endif // VP9_ENCODER_VP9_SPEED_FEATURES_H_