1 /* Licensed to the Apache Software Foundation (ASF) under one or more
2 * contributor license agreements. See the NOTICE file distributed with
3 * this work for additional information regarding copyright ownership.
4 * The ASF licenses this file to You under the Apache License, Version 2.0
5 * (the "License"); you may not use this file except in compliance with
6 * the License. You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
18 ** This program is based on ZeusBench V1.0 written by Adam Twiss
19 ** which is Copyright (c) 1996 by Zeus Technology Ltd. http://www.zeustech.net/
21 ** This software is provided "as is" and any express or implied waranties,
22 ** including but not limited to, the implied warranties of merchantability and
23 ** fitness for a particular purpose are disclaimed. In no event shall
24 ** Zeus Technology Ltd. be liable for any direct, indirect, incidental, special,
25 ** exemplary, or consequential damaged (including, but not limited to,
26 ** procurement of substitute good or services; loss of use, data, or profits;
27 ** or business interruption) however caused and on theory of liability. Whether
28 ** in contract, strict liability or tort (including negligence or otherwise)
29 ** arising in any way out of the use of this software, even if advised of the
30 ** possibility of such damage.
36 ** - Originally written by Adam Twiss <adam@zeus.co.uk>, March 1996
37 ** with input from Mike Belshe <mbelshe@netscape.com> and
38 ** Michael Campanella <campanella@stevms.enet.dec.com>
39 ** - Enhanced by Dean Gaudet <dgaudet@apache.org>, November 1997
40 ** - Cleaned up by Ralf S. Engelschall <rse@apache.org>, March 1998
41 ** - POST and verbosity by Kurt Sussman <kls@merlot.com>, August 1998
42 ** - HTML table output added by David N. Welton <davidw@prosa.it>, January 1999
43 ** - Added Cookie, Arbitrary header and auth support. <dirkx@webweaving.org>, April 1999
45 ** - Increased version number - as some of the socket/error handling has
46 ** fundamentally changed - and will give fundamentally different results
47 ** in situations where a server is dropping requests. Therefore you can
48 ** no longer compare results of AB as easily. Hence the inc of the version.
49 ** They should be closer to the truth though. Sander & <dirkx@covalent.net>, End 2000.
50 ** - Fixed proxy functionality, added median/mean statistics, added gnuplot
51 ** output option, added _experimental/rudimentary_ SSL support. Added
52 ** confidence guestimators and warnings. Sander & <dirkx@covalent.net>, End 2000
53 ** - Fixed serious int overflow issues which would cause realistic (longer
54 ** than a few minutes) run's to have wrong (but believable) results. Added
55 ** trapping of connection errors which influenced measurements.
56 ** Contributed by Sander Temme, Early 2001
58 ** - Changed timeout behavour during write to work whilst the sockets
59 ** are filling up and apr_write() does writes a few - but not all.
60 ** This will potentially change results. <dirkx@webweaving.org>, April 2001
62 ** Improvements to concurrent processing:
63 ** - Enabled non-blocking connect()s.
64 ** - Prevent blocking calls to apr_socket_recv() (thereby allowing AB to
65 ** manage its entire set of socket descriptors).
66 ** - Any error returned from apr_socket_recv() that is not EAGAIN or EOF
67 ** is now treated as fatal.
68 ** Contributed by Aaron Bannert, April 24, 2002
71 ** Internalized the version string - this string is part
72 ** of the Agent: header and the result output.
75 ** Adopted SSL code by Madhu Mathihalli <madhusudan_mathihalli@hp.com>
76 ** [PATCH] ab with SSL support Posted Wed, 15 Aug 2001 20:55:06 GMT
77 ** Introduces four 'if (int == value)' tests per non-ssl request.
80 ** Switched to the new abstract pollset API, allowing ab to
81 ** take advantage of future apr_pollset_t scalability improvements.
82 ** Contributed by Brian Pane, August 31, 2002
85 ** SIGINT now triggers output_results().
86 ** Contributed by colm, March 30, 2006
89 /* Note: this version string should start with \d+[\d\.]* and be a valid
90 * string for an HTTP Agent: header when prefixed with 'ApacheBench/'.
91 * It should reflect the version of AB - and not that of the apache server
92 * it happens to accompany. And it should be updated or changed whenever
93 * the results are no longer fundamentally comparable to the results of
94 * a previous version of ab. Either due to a change in the logic of
95 * ab - or to due to a change in the distribution it is compiled with
96 * (such as an APR change in for example blocking).
98 #define AP_AB_BASEREVISION "2.3"
104 * - has various other poor buffer attacks related to the lazy parsing of
105 * response headers from the server
106 * - doesn't implement much of HTTP/1.x, only accepts certain forms of
108 * - (performance problem) heavy use of strstr shows up top in profile
109 * only an issue for loopback usage
112 /* -------------------------------------------------------------------- */
115 /* Hmmm... This source code isn't being compiled in ASCII.
116 * In order for data that flows over the network to make
117 * sense, we need to translate to/from ASCII.
122 /* affects include files on Solaris */
126 #include "apr_signal.h"
127 #include "apr_strings.h"
128 #include "apr_network_io.h"
129 #include "apr_file_io.h"
130 #include "apr_time.h"
131 #include "apr_getopt.h"
132 #include "apr_general.h"
134 #include "apr_portable.h"
135 #include "ap_release.h"
136 #include "apr_poll.h"
138 #define APR_WANT_STRFUNC
139 #include "apr_want.h"
141 #include "apr_base64.h"
143 #include "apr_xlate.h"
148 #if APR_HAVE_STDLIB_H
151 #if APR_HAVE_UNISTD_H
152 #include <unistd.h> /* for getpid() */
155 #if !defined(WIN32) && !defined(NETWARE)
156 #include "ap_config_auto.h"
159 #if defined(HAVE_OPENSSL)
161 #include <openssl/rsa.h>
162 #include <openssl/crypto.h>
163 #include <openssl/x509.h>
164 #include <openssl/pem.h>
165 #include <openssl/err.h>
166 #include <openssl/ssl.h>
167 #include <openssl/rand.h>
169 #define SK_NUM(x) sk_X509_num(x)
170 #define SK_VALUE(x,y) sk_X509_value(x,y)
171 typedef STACK_OF(X509) X509_STACK_TYPE;
173 #if defined(_MSC_VER)
174 /* The following logic ensures we correctly glue FILE* within one CRT used
175 * by the OpenSSL library build to another CRT used by the ab.exe build.
176 * This became especially problematic with Visual Studio 2015.
178 #include <openssl/applink.c>
184 #if (OPENSSL_VERSION_NUMBER >= 0x00909000)
185 #define AB_SSL_METHOD_CONST const
187 #define AB_SSL_METHOD_CONST
189 #if (OPENSSL_VERSION_NUMBER >= 0x0090707f)
190 #define AB_SSL_CIPHER_CONST const
192 #define AB_SSL_CIPHER_CONST
194 #ifdef SSL_OP_NO_TLSv1_2
197 #if !defined(OPENSSL_NO_TLSEXT) && defined(SSL_set_tlsext_host_name)
206 #if APR_HAVE_LIMITS_H
210 /* ------------------- DEFINITIONS -------------------------- */
213 #define AB_MAX APR_INT64_C(0x7fffffffffffffff)
215 #define AB_MAX LLONG_MAX
218 /* maximum number of requests on a time limited test */
219 #define MAX_REQUESTS (INT_MAX > 50000 ? 50000 : INT_MAX)
222 * don't add enums or rearrange or otherwise change values without
223 * visiting set_conn_state()
226 STATE_UNCONNECTED = 0,
227 STATE_CONNECTING, /* TCP connect initiated, but we don't
228 * know if it worked yet
230 STATE_CONNECTED, /* we know TCP connect completed */
234 #define CBUFFSIZE (8192)
238 apr_socket_t *aprsock;
241 apr_size_t read; /* amount of bytes read */
242 apr_size_t bread; /* amount of body read */
243 apr_size_t rwrite, rwrote; /* keep pointers in what we write - across
245 apr_size_t length; /* Content-Length value used for keep-alive */
246 char cbuff[CBUFFSIZE]; /* a buffer to store server response header */
247 int cbx; /* offset in cbuffer */
248 int keepalive; /* non-zero if a keep-alive request */
249 int gotheader; /* non-zero if we have the entire header in
251 apr_time_t start, /* Start of connection */
252 connect, /* Connected, start writing */
253 endwrite, /* Request written */
254 beginread, /* First byte of input */
255 done; /* Connection closed */
264 apr_time_t starttime; /* start time of connection */
265 apr_interval_time_t waittime; /* between request and reading response */
266 apr_interval_time_t ctime; /* time to connect */
267 apr_interval_time_t time; /* time for connection */
270 #define ap_min(a,b) (((a)<(b))?(a):(b))
271 #define ap_max(a,b) (((a)>(b))?(a):(b))
272 #define ap_round_ms(a) ((apr_time_t)((a) + 500)/1000)
273 #define ap_double_ms(a) ((double)(a)/1000.0)
274 #define MAX_CONCURRENCY 20000
276 /* --------------------- GLOBALS ---------------------------- */
278 int verbosity = 0; /* no verbosity by default */
279 int recverrok = 0; /* ok to proceed after socket receive errors */
280 enum {NO_METH = 0, GET, HEAD, PUT, POST, CUSTOM_METHOD} method = NO_METH;
281 const char *method_str[] = {"bug", "GET", "HEAD", "PUT", "POST", ""};
282 int send_body = 0; /* non-zero if sending body with request */
283 int requests = 1; /* Number of requests to make */
284 int heartbeatres = 100; /* How often do we say we're alive */
285 int concurrency = 1; /* Number of multiple requests to make */
286 int percentile = 1; /* Show percentile served */
287 int nolength = 0; /* Accept variable document length */
288 int confidence = 1; /* Show confidence estimator and warnings */
289 int tlimit = 0; /* time limit in secs */
290 int keepalive = 0; /* try and do keepalive connections */
291 int windowsize = 0; /* we use the OS default window size */
292 char servername[1024]; /* name that server reports */
293 char *hostname; /* host name from URL */
294 const char *host_field; /* value of "Host:" header field */
295 const char *path; /* path name */
296 char *postdata; /* *buffer containing data from postfile */
297 apr_size_t postlen = 0; /* length of data to be POSTed */
298 char *content_type = NULL; /* content type to put in POST header */
299 const char *cookie, /* optional cookie line */
300 *auth, /* optional (basic/uuencoded) auhentication */
301 *hdrs; /* optional arbitrary headers */
302 apr_port_t port; /* port number */
303 char *proxyhost = NULL; /* proxy host name */
304 int proxyport = 0; /* proxy port */
305 const char *connecthost;
307 apr_port_t connectport;
308 const char *gnuplot; /* GNUplot file */
309 const char *csvperc; /* CSV Percentile file */
311 const char *colonhost;
313 apr_interval_time_t aprtimeout = apr_time_from_sec(30); /* timeout value */
315 /* overrides for ab-generated common headers */
316 const char *opt_host; /* which optional "Host:" header specified, if any */
317 int opt_useragent = 0; /* was an optional "User-Agent:" header specified? */
318 int opt_accept = 0; /* was an optional "Accept:" header specified? */
320 * XXX - this is now a per read/write transact type of value
323 int use_html = 0; /* use html in the report */
324 const char *tablestring;
325 const char *trstring;
326 const char *tdstring;
328 apr_size_t doclen = 0; /* the length the document should be */
329 apr_int64_t totalread = 0; /* total number of bytes read */
330 apr_int64_t totalbread = 0; /* totoal amount of entity body read */
331 apr_int64_t totalposted = 0; /* total number of bytes posted, inc. headers */
332 int started = 0; /* number of requests started, so no excess */
333 int done = 0; /* number of requests we have done */
334 int doneka = 0; /* number of keep alive connections done */
335 int good = 0, bad = 0; /* number of good and bad requests */
336 int epipe = 0; /* number of broken pipe writes */
337 int err_length = 0; /* requests failed due to response length */
338 int err_conn = 0; /* requests failed due to connection drop */
339 int err_recv = 0; /* requests failed due to broken read */
340 int err_except = 0; /* requests failed due to exception */
341 int err_response = 0; /* requests with invalid or non-200 response */
346 char *ssl_cipher = NULL;
347 char *ssl_info = NULL;
348 char *ssl_tmp_key = NULL;
349 BIO *bio_out,*bio_err;
351 int tls_use_sni = 1; /* used by default, -I disables it */
352 const char *tls_sni = NULL; /* 'opt_host' if any, 'hostname' otherwise */
356 apr_time_t start, lasttime, stoptime;
358 /* global request (and its length) */
360 char *request = _request;
362 int requests_initialized = 0;
364 /* one global throw-away buffer to read stuff into */
367 /* interesting percentiles */
368 int percs[] = {50, 66, 75, 80, 90, 95, 98, 99, 100};
370 struct connection *con; /* connection array */
371 struct data *stats; /* data for each request */
374 apr_pollset_t *readbits;
376 apr_sockaddr_t *mysa;
377 apr_sockaddr_t *destsa;
380 apr_xlate_t *from_ascii, *to_ascii;
383 static void write_request(struct connection * c);
384 static void close_connection(struct connection * c);
386 /* --------------------------------------------------------- */
388 /* simple little function to write an error string and exit */
390 static void err(const char *s)
392 fprintf(stderr, "%s\n", s);
394 printf("Total of %d requests completed\n" , done);
398 /* simple little function to write an APR error string and exit */
400 static void apr_err(const char *s, apr_status_t rv)
406 s, apr_strerror(rv, buf, sizeof buf), rv);
408 printf("Total of %d requests completed\n" , done);
412 static void *xmalloc(size_t size)
414 void *ret = malloc(size);
416 fprintf(stderr, "Could not allocate memory (%"
417 APR_SIZE_T_FMT" bytes)\n", size);
423 static void *xcalloc(size_t num, size_t size)
425 void *ret = calloc(num, size);
427 fprintf(stderr, "Could not allocate memory (%"
428 APR_SIZE_T_FMT" bytes)\n", size*num);
434 static char *xstrdup(const char *s)
436 char *ret = strdup(s);
438 fprintf(stderr, "Could not allocate memory (%"
439 APR_SIZE_T_FMT " bytes)\n", strlen(s));
446 * Similar to standard strstr() but we ignore case in this version.
447 * Copied from ap_strcasestr().
449 static char *xstrcasestr(const char *s1, const char *s2)
457 for ( ; (*s1 != '\0') && (apr_tolower(*s1) != apr_tolower(*s2)); s1++);
461 /* found first character of s2, see if the rest matches */
464 for (++p1, ++p2; apr_tolower(*p1) == apr_tolower(*p2); ++p1, ++p2) {
466 /* both strings ended together */
471 /* second string ended, a match */
474 /* didn't find a match here, try starting at next character in s1 */
480 /* pool abort function */
481 static int abort_on_oom(int retcode)
483 fprintf(stderr, "Could not allocate memory\n");
489 static void set_polled_events(struct connection *c, apr_int16_t new_reqevents)
493 if (c->pollfd.reqevents != new_reqevents) {
494 if (c->pollfd.reqevents != 0) {
495 rv = apr_pollset_remove(readbits, &c->pollfd);
496 if (rv != APR_SUCCESS) {
497 apr_err("apr_pollset_remove()", rv);
501 if (new_reqevents != 0) {
502 c->pollfd.reqevents = new_reqevents;
503 rv = apr_pollset_add(readbits, &c->pollfd);
504 if (rv != APR_SUCCESS) {
505 apr_err("apr_pollset_add()", rv);
511 static void set_conn_state(struct connection *c, connect_state_e new_state)
513 apr_int16_t events_by_state[] = {
514 0, /* for STATE_UNCONNECTED */
515 APR_POLLOUT, /* for STATE_CONNECTING */
516 APR_POLLIN, /* for STATE_CONNECTED; we don't poll in this state,
517 * so prepare for polling in the following state --
520 APR_POLLIN /* for STATE_READ */
523 c->state = new_state;
525 set_polled_events(c, events_by_state[new_state]);
528 /* --------------------------------------------------------- */
529 /* write out request to a connection - assumes we can write
530 * (small) request out in one go into our new socket buffer
534 static long ssl_print_cb(BIO *bio,int cmd,const char *argp,int argi,long argl,long ret)
538 out=(BIO *)BIO_get_callback_arg(bio);
539 if (out == NULL) return(ret);
541 if (cmd == (BIO_CB_READ|BIO_CB_RETURN)) {
542 BIO_printf(out,"read from %p [%p] (%d bytes => %ld (0x%lX))\n",
543 bio, argp, argi, ret, ret);
544 BIO_dump(out,(char *)argp,(int)ret);
547 else if (cmd == (BIO_CB_WRITE|BIO_CB_RETURN)) {
548 BIO_printf(out,"write to %p [%p] (%d bytes => %ld (0x%lX))\n",
549 bio, argp, argi, ret, ret);
550 BIO_dump(out,(char *)argp,(int)ret);
555 static void ssl_state_cb(const SSL *s, int w, int r)
557 if (w & SSL_CB_ALERT) {
558 BIO_printf(bio_err, "SSL/TLS Alert [%s] %s:%s\n",
559 (w & SSL_CB_READ ? "read" : "write"),
560 SSL_alert_type_string_long(r),
561 SSL_alert_desc_string_long(r));
562 } else if (w & SSL_CB_LOOP) {
563 BIO_printf(bio_err, "SSL/TLS State [%s] %s\n",
564 (SSL_in_connect_init((SSL*)s) ? "connect" : "-"),
565 SSL_state_string_long(s));
566 } else if (w & (SSL_CB_HANDSHAKE_START|SSL_CB_HANDSHAKE_DONE)) {
567 BIO_printf(bio_err, "SSL/TLS Handshake [%s] %s\n",
568 (w & SSL_CB_HANDSHAKE_START ? "Start" : "Done"),
569 SSL_state_string_long(s));
574 #define RAND_MAX INT_MAX
577 static int ssl_rand_choosenum(int l, int h)
582 srand((unsigned int)time(NULL));
583 apr_snprintf(buf, sizeof(buf), "%.0f",
584 (((double)(rand()%RAND_MAX)/RAND_MAX)*(h-l)));
591 static void ssl_rand_seed(void)
596 unsigned char stackdata[256];
599 * seed in the current time (usually just 4 bytes)
603 RAND_seed((unsigned char *)&t, l);
606 * seed in the current process id (usually just 4 bytes)
610 RAND_seed((unsigned char *)&pid, l);
613 * seed in some current state of the run-time stack (128 bytes)
615 n = ssl_rand_choosenum(0, sizeof(stackdata)-128-1);
616 RAND_seed(stackdata+n, 128);
619 static int ssl_print_connection_info(BIO *bio, SSL *ssl)
621 AB_SSL_CIPHER_CONST SSL_CIPHER *c;
624 BIO_printf(bio,"Transport Protocol :%s\n", SSL_get_version(ssl));
626 c = SSL_get_current_cipher(ssl);
627 BIO_printf(bio,"Cipher Suite Protocol :%s\n", SSL_CIPHER_get_version(c));
628 BIO_printf(bio,"Cipher Suite Name :%s\n",SSL_CIPHER_get_name(c));
630 bits = SSL_CIPHER_get_bits(c,&alg_bits);
631 BIO_printf(bio,"Cipher Suite Cipher Bits:%d (%d)\n",bits,alg_bits);
636 static void ssl_print_cert_info(BIO *bio, X509 *cert)
642 BIO_printf(bio, "Certificate version: %ld\n", X509_get_version(cert)+1);
643 BIO_printf(bio,"Valid from: ");
644 ASN1_UTCTIME_print(bio, X509_get_notBefore(cert));
645 BIO_printf(bio,"\n");
647 BIO_printf(bio,"Valid to : ");
648 ASN1_UTCTIME_print(bio, X509_get_notAfter(cert));
649 BIO_printf(bio,"\n");
651 pk = X509_get_pubkey(cert);
652 BIO_printf(bio,"Public key is %d bits\n",
656 dn = X509_get_issuer_name(cert);
657 X509_NAME_oneline(dn, buf, sizeof(buf));
658 BIO_printf(bio,"The issuer name is %s\n", buf);
660 dn=X509_get_subject_name(cert);
661 X509_NAME_oneline(dn, buf, sizeof(buf));
662 BIO_printf(bio,"The subject name is %s\n", buf);
664 /* dump the extension list too */
665 BIO_printf(bio, "Extension Count: %d\n", X509_get_ext_count(cert));
668 static void ssl_print_info(struct connection *c)
674 BIO_printf(bio_err, "\n");
675 sk = SSL_get_peer_cert_chain(c->ssl);
676 if ((count = SK_NUM(sk)) > 0) {
678 for (i=1; i<count; i++) {
679 cert = (X509 *)SK_VALUE(sk, i);
680 ssl_print_cert_info(bio_out, cert);
683 cert = SSL_get_peer_certificate(c->ssl);
685 BIO_printf(bio_out, "Anon DH\n");
687 BIO_printf(bio_out, "Peer certificate\n");
688 ssl_print_cert_info(bio_out, cert);
691 ssl_print_connection_info(bio_err,c->ssl);
692 SSL_SESSION_print(bio_err, SSL_get_session(c->ssl));
695 static void ssl_proceed_handshake(struct connection *c)
702 ret = SSL_do_handshake(c->ssl);
703 ecode = SSL_get_error(c->ssl, ret);
709 if (ssl_info == NULL) {
710 AB_SSL_CIPHER_CONST SSL_CIPHER *ci;
712 int sk_bits, pk_bits, swork;
714 ci = SSL_get_current_cipher(c->ssl);
715 sk_bits = SSL_CIPHER_get_bits(ci, &swork);
716 cert = SSL_get_peer_certificate(c->ssl);
718 pk_bits = EVP_PKEY_bits(X509_get_pubkey(cert));
720 pk_bits = 0; /* Anon DH */
722 ssl_info = xmalloc(128);
723 apr_snprintf(ssl_info, 128, "%s,%s,%d,%d",
724 SSL_get_version(c->ssl),
725 SSL_CIPHER_get_name(ci),
728 if (ssl_tmp_key == NULL) {
730 if (SSL_get_server_tmp_key(c->ssl, &key)) {
731 ssl_tmp_key = xmalloc(128);
732 switch (EVP_PKEY_id(key)) {
734 apr_snprintf(ssl_tmp_key, 128, "RSA %d bits",
738 apr_snprintf(ssl_tmp_key, 128, "DH %d bits",
741 #ifndef OPENSSL_NO_EC
743 const char *cname = NULL;
744 EC_KEY *ec = EVP_PKEY_get1_EC_KEY(key);
745 int nid = EC_GROUP_get_curve_name(EC_KEY_get0_group(ec));
747 #if OPENSSL_VERSION_NUMBER >= 0x10002000L
748 cname = EC_curve_nid2nist(nid);
751 cname = OBJ_nid2sn(nid);
753 apr_snprintf(ssl_tmp_key, 128, "ECDH %s %d bits",
766 case SSL_ERROR_WANT_READ:
767 set_polled_events(c, APR_POLLIN);
770 case SSL_ERROR_WANT_WRITE:
774 case SSL_ERROR_WANT_CONNECT:
776 case SSL_ERROR_SYSCALL:
777 /* Unexpected result */
778 BIO_printf(bio_err, "SSL handshake failed (%d).\n", ecode);
779 ERR_print_errors(bio_err);
789 static void write_request(struct connection * c)
791 if (started >= requests) {
797 apr_size_t l = c->rwrite;
798 apr_status_t e = APR_SUCCESS; /* prevent gcc warning */
800 tnow = lasttime = apr_time_now();
805 if (c->rwrite == 0) {
806 apr_socket_timeout_set(c->aprsock, 0);
811 c->rwrite += postlen;
814 else if (tnow > c->connect + aprtimeout) {
815 printf("Send request timed out!\n");
823 e_ssl = SSL_write(c->ssl,request + c->rwrote, l);
825 BIO_printf(bio_err, "SSL write failed - closing connection\n");
826 ERR_print_errors(bio_err);
827 close_connection (c);
835 e = apr_socket_send(c->aprsock, request + c->rwrote, &l);
837 if (e != APR_SUCCESS && !APR_STATUS_IS_EAGAIN(e)) {
839 printf("Send request failed!\n");
848 c->endwrite = lasttime = apr_time_now();
850 set_conn_state(c, STATE_READ);
853 /* --------------------------------------------------------- */
855 /* calculate and output results */
857 static int compradre(struct data * a, struct data * b)
859 if ((a->ctime) < (b->ctime))
861 if ((a->ctime) > (b->ctime))
866 static int comprando(struct data * a, struct data * b)
868 if ((a->time) < (b->time))
870 if ((a->time) > (b->time))
875 static int compri(struct data * a, struct data * b)
877 apr_interval_time_t p = a->time - a->ctime;
878 apr_interval_time_t q = b->time - b->ctime;
886 static int compwait(struct data * a, struct data * b)
888 if ((a->waittime) < (b->waittime))
890 if ((a->waittime) > (b->waittime))
895 static void output_results(int sig)
900 lasttime = apr_time_now(); /* record final time if interrupted */
902 timetaken = (double) (lasttime - start) / APR_USEC_PER_SEC;
905 printf("Server Software: %s\n", servername);
906 printf("Server Hostname: %s\n", hostname);
907 printf("Server Port: %hu\n", port);
909 if (is_ssl && ssl_info) {
910 printf("SSL/TLS Protocol: %s\n", ssl_info);
912 if (is_ssl && ssl_tmp_key) {
913 printf("Server Temp Key: %s\n", ssl_tmp_key);
916 if (is_ssl && tls_sni) {
917 printf("TLS Server Name: %s\n", tls_sni);
922 printf("Document Path: %s\n", path);
924 printf("Document Length: Variable\n");
926 printf("Document Length: %" APR_SIZE_T_FMT " bytes\n", doclen);
928 printf("Concurrency Level: %d\n", concurrency);
929 printf("Time taken for tests: %.3f seconds\n", timetaken);
930 printf("Complete requests: %d\n", done);
931 printf("Failed requests: %d\n", bad);
933 printf(" (Connect: %d, Receive: %d, Length: %d, Exceptions: %d)\n",
934 err_conn, err_recv, err_length, err_except);
936 printf("Write errors: %d\n", epipe);
938 printf("Non-2xx responses: %d\n", err_response);
940 printf("Keep-Alive requests: %d\n", doneka);
941 printf("Total transferred: %" APR_INT64_T_FMT " bytes\n", totalread);
943 printf("Total body sent: %" APR_INT64_T_FMT "\n",
945 printf("HTML transferred: %" APR_INT64_T_FMT " bytes\n", totalbread);
947 /* avoid divide by zero */
948 if (timetaken && done) {
949 printf("Requests per second: %.2f [#/sec] (mean)\n",
950 (double) done / timetaken);
951 printf("Time per request: %.3f [ms] (mean)\n",
952 (double) concurrency * timetaken * 1000 / done);
953 printf("Time per request: %.3f [ms] (mean, across all concurrent requests)\n",
954 (double) timetaken * 1000 / done);
955 printf("Transfer rate: %.2f [Kbytes/sec] received\n",
956 (double) totalread / 1024 / timetaken);
958 printf(" %.2f kb/s sent\n",
959 (double) totalposted / 1024 / timetaken);
960 printf(" %.2f kb/s total\n",
961 (double) (totalread + totalposted) / 1024 / timetaken);
966 /* work out connection times */
968 apr_time_t totalcon = 0, total = 0, totald = 0, totalwait = 0;
969 apr_time_t meancon, meantot, meand, meanwait;
970 apr_interval_time_t mincon = AB_MAX, mintot = AB_MAX, mind = AB_MAX,
972 apr_interval_time_t maxcon = 0, maxtot = 0, maxd = 0, maxwait = 0;
973 apr_interval_time_t mediancon = 0, mediantot = 0, mediand = 0, medianwait = 0;
974 double sdtot = 0, sdcon = 0, sdd = 0, sdwait = 0;
976 for (i = 0; i < done; i++) {
977 struct data *s = &stats[i];
978 mincon = ap_min(mincon, s->ctime);
979 mintot = ap_min(mintot, s->time);
980 mind = ap_min(mind, s->time - s->ctime);
981 minwait = ap_min(minwait, s->waittime);
983 maxcon = ap_max(maxcon, s->ctime);
984 maxtot = ap_max(maxtot, s->time);
985 maxd = ap_max(maxd, s->time - s->ctime);
986 maxwait = ap_max(maxwait, s->waittime);
988 totalcon += s->ctime;
990 totald += s->time - s->ctime;
991 totalwait += s->waittime;
993 meancon = totalcon / done;
994 meantot = total / done;
995 meand = totald / done;
996 meanwait = totalwait / done;
998 /* calculating the sample variance: the sum of the squared deviations, divided by n-1 */
999 for (i = 0; i < done; i++) {
1000 struct data *s = &stats[i];
1002 a = ((double)s->time - meantot);
1004 a = ((double)s->ctime - meancon);
1006 a = ((double)s->time - (double)s->ctime - meand);
1008 a = ((double)s->waittime - meanwait);
1012 sdtot = (done > 1) ? sqrt(sdtot / (done - 1)) : 0;
1013 sdcon = (done > 1) ? sqrt(sdcon / (done - 1)) : 0;
1014 sdd = (done > 1) ? sqrt(sdd / (done - 1)) : 0;
1015 sdwait = (done > 1) ? sqrt(sdwait / (done - 1)) : 0;
1018 * XXX: what is better; this hideous cast of the compradre function; or
1019 * the four warnings during compile ? dirkx just does not know and
1022 qsort(stats, done, sizeof(struct data),
1023 (int (*) (const void *, const void *)) compradre);
1024 if ((done > 1) && (done % 2))
1025 mediancon = (stats[done / 2].ctime + stats[done / 2 + 1].ctime) / 2;
1027 mediancon = stats[done / 2].ctime;
1029 qsort(stats, done, sizeof(struct data),
1030 (int (*) (const void *, const void *)) compri);
1031 if ((done > 1) && (done % 2))
1032 mediand = (stats[done / 2].time + stats[done / 2 + 1].time \
1033 -stats[done / 2].ctime - stats[done / 2 + 1].ctime) / 2;
1035 mediand = stats[done / 2].time - stats[done / 2].ctime;
1037 qsort(stats, done, sizeof(struct data),
1038 (int (*) (const void *, const void *)) compwait);
1039 if ((done > 1) && (done % 2))
1040 medianwait = (stats[done / 2].waittime + stats[done / 2 + 1].waittime) / 2;
1042 medianwait = stats[done / 2].waittime;
1044 qsort(stats, done, sizeof(struct data),
1045 (int (*) (const void *, const void *)) comprando);
1046 if ((done > 1) && (done % 2))
1047 mediantot = (stats[done / 2].time + stats[done / 2 + 1].time) / 2;
1049 mediantot = stats[done / 2].time;
1051 printf("\nConnection Times (ms)\n");
1053 * Reduce stats from apr time to milliseconds
1055 mincon = ap_round_ms(mincon);
1056 mind = ap_round_ms(mind);
1057 minwait = ap_round_ms(minwait);
1058 mintot = ap_round_ms(mintot);
1059 meancon = ap_round_ms(meancon);
1060 meand = ap_round_ms(meand);
1061 meanwait = ap_round_ms(meanwait);
1062 meantot = ap_round_ms(meantot);
1063 mediancon = ap_round_ms(mediancon);
1064 mediand = ap_round_ms(mediand);
1065 medianwait = ap_round_ms(medianwait);
1066 mediantot = ap_round_ms(mediantot);
1067 maxcon = ap_round_ms(maxcon);
1068 maxd = ap_round_ms(maxd);
1069 maxwait = ap_round_ms(maxwait);
1070 maxtot = ap_round_ms(maxtot);
1071 sdcon = ap_double_ms(sdcon);
1072 sdd = ap_double_ms(sdd);
1073 sdwait = ap_double_ms(sdwait);
1074 sdtot = ap_double_ms(sdtot);
1077 #define CONF_FMT_STRING "%5" APR_TIME_T_FMT " %4" APR_TIME_T_FMT " %5.1f %6" APR_TIME_T_FMT " %7" APR_TIME_T_FMT "\n"
1078 printf(" min mean[+/-sd] median max\n");
1079 printf("Connect: " CONF_FMT_STRING,
1080 mincon, meancon, sdcon, mediancon, maxcon);
1081 printf("Processing: " CONF_FMT_STRING,
1082 mind, meand, sdd, mediand, maxd);
1083 printf("Waiting: " CONF_FMT_STRING,
1084 minwait, meanwait, sdwait, medianwait, maxwait);
1085 printf("Total: " CONF_FMT_STRING,
1086 mintot, meantot, sdtot, mediantot, maxtot);
1087 #undef CONF_FMT_STRING
1089 #define SANE(what,mean,median,sd) \
1091 double d = (double)mean - median; \
1092 if (d < 0) d = -d; \
1094 printf("ERROR: The median and mean for " what " are more than twice the standard\n" \
1095 " deviation apart. These results are NOT reliable.\n"); \
1097 printf("WARNING: The median and mean for " what " are not within a normal deviation\n" \
1098 " These results are probably not that reliable.\n"); \
1100 SANE("the initial connection time", meancon, mediancon, sdcon);
1101 SANE("the processing time", meand, mediand, sdd);
1102 SANE("the waiting time", meanwait, medianwait, sdwait);
1103 SANE("the total time", meantot, mediantot, sdtot);
1106 printf(" min avg max\n");
1107 #define CONF_FMT_STRING "%5" APR_TIME_T_FMT " %5" APR_TIME_T_FMT "%5" APR_TIME_T_FMT "\n"
1108 printf("Connect: " CONF_FMT_STRING, mincon, meancon, maxcon);
1109 printf("Processing: " CONF_FMT_STRING, mind, meand, maxd);
1110 printf("Waiting: " CONF_FMT_STRING, minwait, meanwait, maxwait);
1111 printf("Total: " CONF_FMT_STRING, mintot, meantot, maxtot);
1112 #undef CONF_FMT_STRING
1116 /* Sorted on total connect times */
1117 if (percentile && (done > 1)) {
1118 printf("\nPercentage of the requests served within a certain time (ms)\n");
1119 for (i = 0; i < sizeof(percs) / sizeof(int); i++) {
1121 printf(" 0%% <0> (never)\n");
1122 else if (percs[i] >= 100)
1123 printf(" 100%% %5" APR_TIME_T_FMT " (longest request)\n",
1124 ap_round_ms(stats[done - 1].time));
1126 printf(" %d%% %5" APR_TIME_T_FMT "\n", percs[i],
1127 ap_round_ms(stats[(unsigned long)done * percs[i] / 100].time));
1131 FILE *out = fopen(csvperc, "w");
1133 perror("Cannot open CSV output file");
1136 fprintf(out, "" "Percentage served" "," "Time in ms" "\n");
1137 for (i = 0; i <= 100; i++) {
1140 t = ap_double_ms(stats[0].time);
1142 t = ap_double_ms(stats[done - 1].time);
1144 t = ap_double_ms(stats[(unsigned long) (0.5 + (double)done * i / 100.0)].time);
1145 fprintf(out, "%d,%.3f\n", i, t);
1150 FILE *out = fopen(gnuplot, "w");
1151 char tmstring[APR_CTIME_LEN];
1153 perror("Cannot open gnuplot output file");
1156 fprintf(out, "starttime\tseconds\tctime\tdtime\tttime\twait\n");
1157 for (i = 0; i < done; i++) {
1158 (void) apr_ctime(tmstring, stats[i].starttime);
1159 fprintf(out, "%s\t%" APR_TIME_T_FMT "\t%" APR_TIME_T_FMT
1160 "\t%" APR_TIME_T_FMT "\t%" APR_TIME_T_FMT
1161 "\t%" APR_TIME_T_FMT "\n", tmstring,
1162 apr_time_sec(stats[i].starttime),
1163 ap_round_ms(stats[i].ctime),
1164 ap_round_ms(stats[i].time - stats[i].ctime),
1165 ap_round_ms(stats[i].time),
1166 ap_round_ms(stats[i].waittime));
1177 /* --------------------------------------------------------- */
1179 /* calculate and output results in HTML */
1181 static void output_html_results(void)
1183 double timetaken = (double) (lasttime - start) / APR_USEC_PER_SEC;
1185 printf("\n\n<table %s>\n", tablestring);
1186 printf("<tr %s><th colspan=2 %s>Server Software:</th>"
1187 "<td colspan=2 %s>%s</td></tr>\n",
1188 trstring, tdstring, tdstring, servername);
1189 printf("<tr %s><th colspan=2 %s>Server Hostname:</th>"
1190 "<td colspan=2 %s>%s</td></tr>\n",
1191 trstring, tdstring, tdstring, hostname);
1192 printf("<tr %s><th colspan=2 %s>Server Port:</th>"
1193 "<td colspan=2 %s>%hu</td></tr>\n",
1194 trstring, tdstring, tdstring, port);
1195 printf("<tr %s><th colspan=2 %s>Document Path:</th>"
1196 "<td colspan=2 %s>%s</td></tr>\n",
1197 trstring, tdstring, tdstring, path);
1199 printf("<tr %s><th colspan=2 %s>Document Length:</th>"
1200 "<td colspan=2 %s>Variable</td></tr>\n",
1201 trstring, tdstring, tdstring);
1203 printf("<tr %s><th colspan=2 %s>Document Length:</th>"
1204 "<td colspan=2 %s>%" APR_SIZE_T_FMT " bytes</td></tr>\n",
1205 trstring, tdstring, tdstring, doclen);
1206 printf("<tr %s><th colspan=2 %s>Concurrency Level:</th>"
1207 "<td colspan=2 %s>%d</td></tr>\n",
1208 trstring, tdstring, tdstring, concurrency);
1209 printf("<tr %s><th colspan=2 %s>Time taken for tests:</th>"
1210 "<td colspan=2 %s>%.3f seconds</td></tr>\n",
1211 trstring, tdstring, tdstring, timetaken);
1212 printf("<tr %s><th colspan=2 %s>Complete requests:</th>"
1213 "<td colspan=2 %s>%d</td></tr>\n",
1214 trstring, tdstring, tdstring, done);
1215 printf("<tr %s><th colspan=2 %s>Failed requests:</th>"
1216 "<td colspan=2 %s>%d</td></tr>\n",
1217 trstring, tdstring, tdstring, bad);
1219 printf("<tr %s><td colspan=4 %s > (Connect: %d, Length: %d, Exceptions: %d)</td></tr>\n",
1220 trstring, tdstring, err_conn, err_length, err_except);
1222 printf("<tr %s><th colspan=2 %s>Non-2xx responses:</th>"
1223 "<td colspan=2 %s>%d</td></tr>\n",
1224 trstring, tdstring, tdstring, err_response);
1226 printf("<tr %s><th colspan=2 %s>Keep-Alive requests:</th>"
1227 "<td colspan=2 %s>%d</td></tr>\n",
1228 trstring, tdstring, tdstring, doneka);
1229 printf("<tr %s><th colspan=2 %s>Total transferred:</th>"
1230 "<td colspan=2 %s>%" APR_INT64_T_FMT " bytes</td></tr>\n",
1231 trstring, tdstring, tdstring, totalread);
1233 printf("<tr %s><th colspan=2 %s>Total body sent:</th>"
1234 "<td colspan=2 %s>%" APR_INT64_T_FMT "</td></tr>\n",
1236 tdstring, totalposted);
1237 printf("<tr %s><th colspan=2 %s>HTML transferred:</th>"
1238 "<td colspan=2 %s>%" APR_INT64_T_FMT " bytes</td></tr>\n",
1239 trstring, tdstring, tdstring, totalbread);
1241 /* avoid divide by zero */
1243 printf("<tr %s><th colspan=2 %s>Requests per second:</th>"
1244 "<td colspan=2 %s>%.2f</td></tr>\n",
1245 trstring, tdstring, tdstring, (double) done / timetaken);
1246 printf("<tr %s><th colspan=2 %s>Transfer rate:</th>"
1247 "<td colspan=2 %s>%.2f kb/s received</td></tr>\n",
1248 trstring, tdstring, tdstring, (double) totalread / 1024 / timetaken);
1250 printf("<tr %s><td colspan=2 %s> </td>"
1251 "<td colspan=2 %s>%.2f kb/s sent</td></tr>\n",
1252 trstring, tdstring, tdstring,
1253 (double) totalposted / 1024 / timetaken);
1254 printf("<tr %s><td colspan=2 %s> </td>"
1255 "<td colspan=2 %s>%.2f kb/s total</td></tr>\n",
1256 trstring, tdstring, tdstring,
1257 (double) (totalread + totalposted) / 1024 / timetaken);
1261 /* work out connection times */
1263 apr_interval_time_t totalcon = 0, total = 0;
1264 apr_interval_time_t mincon = AB_MAX, mintot = AB_MAX;
1265 apr_interval_time_t maxcon = 0, maxtot = 0;
1267 for (i = 0; i < done; i++) {
1268 struct data *s = &stats[i];
1269 mincon = ap_min(mincon, s->ctime);
1270 mintot = ap_min(mintot, s->time);
1271 maxcon = ap_max(maxcon, s->ctime);
1272 maxtot = ap_max(maxtot, s->time);
1273 totalcon += s->ctime;
1277 * Reduce stats from apr time to milliseconds
1279 mincon = ap_round_ms(mincon);
1280 mintot = ap_round_ms(mintot);
1281 maxcon = ap_round_ms(maxcon);
1282 maxtot = ap_round_ms(maxtot);
1283 totalcon = ap_round_ms(totalcon);
1284 total = ap_round_ms(total);
1286 if (done > 0) { /* avoid division by zero (if 0 done) */
1287 printf("<tr %s><th %s colspan=4>Connnection Times (ms)</th></tr>\n",
1288 trstring, tdstring);
1289 printf("<tr %s><th %s> </th> <th %s>min</th> <th %s>avg</th> <th %s>max</th></tr>\n",
1290 trstring, tdstring, tdstring, tdstring, tdstring);
1291 printf("<tr %s><th %s>Connect:</th>"
1292 "<td %s>%5" APR_TIME_T_FMT "</td>"
1293 "<td %s>%5" APR_TIME_T_FMT "</td>"
1294 "<td %s>%5" APR_TIME_T_FMT "</td></tr>\n",
1295 trstring, tdstring, tdstring, mincon, tdstring, totalcon / done, tdstring, maxcon);
1296 printf("<tr %s><th %s>Processing:</th>"
1297 "<td %s>%5" APR_TIME_T_FMT "</td>"
1298 "<td %s>%5" APR_TIME_T_FMT "</td>"
1299 "<td %s>%5" APR_TIME_T_FMT "</td></tr>\n",
1300 trstring, tdstring, tdstring, mintot - mincon, tdstring,
1301 (total / done) - (totalcon / done), tdstring, maxtot - maxcon);
1302 printf("<tr %s><th %s>Total:</th>"
1303 "<td %s>%5" APR_TIME_T_FMT "</td>"
1304 "<td %s>%5" APR_TIME_T_FMT "</td>"
1305 "<td %s>%5" APR_TIME_T_FMT "</td></tr>\n",
1306 trstring, tdstring, tdstring, mintot, tdstring, total / done, tdstring, maxtot);
1308 printf("</table>\n");
1312 /* --------------------------------------------------------- */
1314 /* start asnchronous non-blocking connection */
1316 static void start_connect(struct connection * c)
1320 if (!(started < requests))
1330 apr_pool_clear(c->ctx);
1332 apr_pool_create(&c->ctx, cntxt);
1334 if ((rv = apr_socket_create(&c->aprsock, destsa->family,
1335 SOCK_STREAM, 0, c->ctx)) != APR_SUCCESS) {
1336 apr_err("socket", rv);
1340 if ((rv = apr_socket_bind(c->aprsock, mysa)) != APR_SUCCESS) {
1341 apr_err("bind", rv);
1345 c->pollfd.desc_type = APR_POLL_SOCKET;
1346 c->pollfd.desc.s = c->aprsock;
1347 c->pollfd.reqevents = 0;
1348 c->pollfd.client_data = c;
1350 if ((rv = apr_socket_opt_set(c->aprsock, APR_SO_NONBLOCK, 1))
1352 apr_err("socket nonblock", rv);
1355 if (windowsize != 0) {
1356 rv = apr_socket_opt_set(c->aprsock, APR_SO_SNDBUF,
1358 if (rv != APR_SUCCESS && rv != APR_ENOTIMPL) {
1359 apr_err("socket send buffer", rv);
1361 rv = apr_socket_opt_set(c->aprsock, APR_SO_RCVBUF,
1363 if (rv != APR_SUCCESS && rv != APR_ENOTIMPL) {
1364 apr_err("socket receive buffer", rv);
1368 c->start = lasttime = apr_time_now();
1374 if ((c->ssl = SSL_new(ssl_ctx)) == NULL) {
1375 BIO_printf(bio_err, "SSL_new failed.\n");
1376 ERR_print_errors(bio_err);
1380 apr_os_sock_get(&fd, c->aprsock);
1381 bio = BIO_new_socket(fd, BIO_NOCLOSE);
1382 SSL_set_bio(c->ssl, bio, bio);
1383 SSL_set_connect_state(c->ssl);
1384 if (verbosity >= 4) {
1385 BIO_set_callback(bio, ssl_print_cb);
1386 BIO_set_callback_arg(bio, (void *)bio_err);
1390 SSL_set_tlsext_host_name(c->ssl, tls_sni);
1397 if ((rv = apr_socket_connect(c->aprsock, destsa)) != APR_SUCCESS) {
1398 if (APR_STATUS_IS_EINPROGRESS(rv)) {
1399 set_conn_state(c, STATE_CONNECTING);
1404 set_conn_state(c, STATE_UNCONNECTED);
1405 apr_socket_close(c->aprsock);
1406 if (good == 0 && destsa->next) {
1407 destsa = destsa->next;
1410 else if (bad++ > 10) {
1412 "\nTest aborted after 10 failures\n\n");
1413 apr_err("apr_socket_connect()", rv);
1424 /* connected first time */
1425 set_conn_state(c, STATE_CONNECTED);
1428 ssl_proceed_handshake(c);
1436 /* --------------------------------------------------------- */
1438 /* close down connection and save stats */
1440 static void close_connection(struct connection * c)
1442 if (c->read == 0 && c->keepalive) {
1444 * server has legitimately shut down an idle keep alive request
1447 good--; /* connection never happened */
1451 /* first time here */
1454 else if ((c->bread != doclen) && !nolength) {
1459 if (done < requests) {
1460 struct data *s = &stats[done++];
1461 c->done = lasttime = apr_time_now();
1462 s->starttime = c->start;
1463 s->ctime = ap_max(0, c->connect - c->start);
1464 s->time = ap_max(0, c->done - c->start);
1465 s->waittime = ap_max(0, c->beginread - c->endwrite);
1466 if (heartbeatres && !(done % heartbeatres)) {
1467 fprintf(stderr, "Completed %d requests\n", done);
1473 set_conn_state(c, STATE_UNCONNECTED);
1476 SSL_shutdown(c->ssl);
1481 apr_socket_close(c->aprsock);
1488 /* --------------------------------------------------------- */
1490 /* read data from connection */
1492 static void read_connection(struct connection * c)
1495 apr_status_t status;
1497 char respcode[4]; /* 3 digits and null */
1503 status = SSL_read(c->ssl, buffer, r);
1505 int scode = SSL_get_error(c->ssl, status);
1507 if (scode == SSL_ERROR_ZERO_RETURN) {
1508 /* connection closed cleanly: */
1510 close_connection(c);
1512 else if (scode == SSL_ERROR_SYSCALL
1515 /* connection closed, but in violation of the protocol, after
1516 * some data has already been read; this commonly happens, so
1517 * let the length check catch any response errors
1520 close_connection(c);
1522 else if (scode == SSL_ERROR_SYSCALL
1525 && c->state == STATE_CONNECTING
1529 else if (scode != SSL_ERROR_WANT_WRITE
1530 && scode != SSL_ERROR_WANT_READ) {
1531 /* some fatal error: */
1533 BIO_printf(bio_err, "SSL read failed (%d) - closing connection\n", scode);
1534 ERR_print_errors(bio_err);
1535 close_connection(c);
1544 status = apr_socket_recv(c->aprsock, buffer, &r);
1545 if (APR_STATUS_IS_EAGAIN(status))
1547 else if (r == 0 && APR_STATUS_IS_EOF(status)) {
1549 close_connection(c);
1552 /* catch legitimate fatal apr_socket_recv errors */
1553 else if (status != APR_SUCCESS) {
1557 close_connection(c);
1558 if (verbosity >= 1) {
1560 fprintf(stderr,"%s: %s (%d)\n", "apr_socket_recv", apr_strerror(status, buf, sizeof buf), status);
1563 } else if (destsa->next && c->state == STATE_CONNECTING
1564 && c->read == 0 && good == 0) {
1569 apr_err("apr_socket_recv", status);
1576 c->beginread = apr_time_now();
1581 if (!c->gotheader) {
1584 apr_size_t space = CBUFFSIZE - c->cbx - 1; /* -1 allows for \0 term */
1585 int tocopy = (space < r) ? space : r;
1587 apr_size_t inbytes_left = space, outbytes_left = space;
1589 status = apr_xlate_conv_buffer(from_ascii, buffer, &inbytes_left,
1590 c->cbuff + c->cbx, &outbytes_left);
1591 if (status || inbytes_left || outbytes_left) {
1592 fprintf(stderr, "only simple translation is supported (%d/%" APR_SIZE_T_FMT
1593 "/%" APR_SIZE_T_FMT ")\n", status, inbytes_left, outbytes_left);
1597 memcpy(c->cbuff + c->cbx, buffer, space);
1598 #endif /* NOT_ASCII */
1601 c->cbuff[c->cbx] = 0; /* terminate for benefit of strstr */
1602 if (verbosity >= 2) {
1603 printf("LOG: header received:\n%s\n", c->cbuff);
1605 s = strstr(c->cbuff, "\r\n\r\n");
1607 * this next line is so that we talk to NCSA 1.5 which blatantly
1608 * breaks the http specifaction
1611 s = strstr(c->cbuff, "\n\n");
1616 /* read rest next time */
1621 /* header is in invalid or too big - close connection */
1622 set_conn_state(c, STATE_UNCONNECTED);
1623 apr_socket_close(c->aprsock);
1626 err("\nTest aborted after 10 failures\n\n");
1632 /* have full header */
1635 * this is first time, extract some interesting info
1639 p = xstrcasestr(c->cbuff, "Server:");
1643 /* -1 to not overwrite last '\0' byte */
1644 while (*p > 32 && len++ < sizeof(servername) - 1)
1650 * XXX: this parsing isn't even remotely HTTP compliant... but in
1651 * the interest of speed it doesn't totally have to be, it just
1652 * needs to be extended to handle whatever servers folks want to
1653 * test against. -djg
1656 /* check response code */
1657 part = strstr(c->cbuff, "HTTP"); /* really HTTP/1.x_ */
1658 if (part && strlen(part) > strlen("HTTP/1.x_")) {
1659 strncpy(respcode, (part + strlen("HTTP/1.x_")), 3);
1663 strcpy(respcode, "500");
1666 if (respcode[0] != '2') {
1669 printf("WARNING: Response code not 2xx (%s)\n", respcode);
1671 else if (verbosity >= 3) {
1672 printf("LOG: Response code = %s\n", respcode);
1675 *s = 0; /* terminate at end of header */
1676 if (keepalive && xstrcasestr(c->cbuff, "Keep-Alive")) {
1679 cl = xstrcasestr(c->cbuff, "Content-Length:");
1680 if (cl && method != HEAD) {
1681 /* response to HEAD doesn't have entity body */
1682 c->length = atoi(cl + 16);
1688 c->bread += c->cbx - (s + l - c->cbuff) + r - tocopy;
1689 totalbread += c->bread;
1691 /* We have received the header, so we know this destination socket
1692 * address is working, so initialize all remaining requests. */
1693 if (!requests_initialized) {
1694 for (i = 1; i < concurrency; i++) {
1696 start_connect(&con[i]);
1698 requests_initialized = 1;
1703 /* outside header, everything we have read is entity body */
1708 if (c->keepalive && (c->bread >= c->length)) {
1709 /* finished a keep-alive connection */
1713 /* first time here */
1716 else if ((c->bread != doclen) && !nolength) {
1720 if (done < requests) {
1721 struct data *s = &stats[done++];
1723 c->done = apr_time_now();
1724 s->starttime = c->start;
1725 s->ctime = ap_max(0, c->connect - c->start);
1726 s->time = ap_max(0, c->done - c->start);
1727 s->waittime = ap_max(0, c->beginread - c->endwrite);
1728 if (heartbeatres && !(done % heartbeatres)) {
1729 fprintf(stderr, "Completed %d requests\n", done);
1737 c->read = c->bread = 0;
1738 /* zero connect time with keep-alive */
1739 c->start = c->connect = lasttime = apr_time_now();
1744 /* --------------------------------------------------------- */
1748 static void test(void)
1750 apr_time_t stoptime;
1754 apr_status_t status;
1755 int snprintf_res = 0;
1757 apr_size_t inbytes_left, outbytes_left;
1761 connecthost = apr_pstrdup(cntxt, proxyhost);
1762 connectport = proxyport;
1765 connecthost = apr_pstrdup(cntxt, hostname);
1770 printf("Benchmarking %s ", hostname);
1772 printf("[through %s:%d] ", proxyhost, proxyport);
1773 printf("(be patient)%s",
1774 (heartbeatres ? "\n" : "..."));
1778 con = xcalloc(concurrency, sizeof(struct connection));
1781 * XXX: a way to calculate the stats without requiring O(requests) memory
1782 * XXX: would be nice.
1784 stats = xcalloc(requests, sizeof(struct data));
1786 if ((status = apr_pollset_create(&readbits, concurrency, cntxt,
1787 APR_POLLSET_NOCOPY)) != APR_SUCCESS) {
1788 apr_err("apr_pollset_create failed", status);
1791 /* add default headers if necessary */
1793 /* Host: header not overridden, add default value to hdrs */
1794 hdrs = apr_pstrcat(cntxt, hdrs, "Host: ", host_field, colonhost, "\r\n", NULL);
1797 /* Header overridden, no need to add, as it is already in hdrs */
1801 if (is_ssl && tls_use_sni) {
1803 if (((tls_sni = opt_host) || (tls_sni = hostname)) &&
1804 (!*tls_sni || apr_ipsubnet_create(&ip, tls_sni, NULL,
1805 cntxt) == APR_SUCCESS)) {
1806 /* IP not allowed in TLS SNI extension */
1812 if (!opt_useragent) {
1813 /* User-Agent: header not overridden, add default value to hdrs */
1814 hdrs = apr_pstrcat(cntxt, hdrs, "User-Agent: ApacheBench/", AP_AB_BASEREVISION, "\r\n", NULL);
1817 /* Header overridden, no need to add, as it is already in hdrs */
1821 /* Accept: header not overridden, add default value to hdrs */
1822 hdrs = apr_pstrcat(cntxt, hdrs, "Accept: */*\r\n", NULL);
1825 /* Header overridden, no need to add, as it is already in hdrs */
1830 snprintf_res = apr_snprintf(request, sizeof(_request),
1831 "%s %s HTTP/1.0\r\n"
1835 (isproxy) ? fullurl : path,
1836 keepalive ? "Connection: Keep-Alive\r\n" : "",
1837 cookie, auth, hdrs);
1840 snprintf_res = apr_snprintf(request, sizeof(_request),
1841 "%s %s HTTP/1.0\r\n"
1843 "Content-length: %" APR_SIZE_T_FMT "\r\n"
1844 "Content-type: %s\r\n"
1848 (isproxy) ? fullurl : path,
1849 keepalive ? "Connection: Keep-Alive\r\n" : "",
1852 (content_type != NULL) ? content_type : "text/plain", hdrs);
1854 if (snprintf_res >= sizeof(_request)) {
1855 err("Request too long\n");
1859 printf("INFO: %s header == \n---\n%s\n---\n",
1860 method_str[method], request);
1862 reqlen = strlen(request);
1865 * Combine headers and (optional) post file into one continuous buffer
1868 char *buff = xmalloc(postlen + reqlen + 1);
1869 strcpy(buff, request);
1870 memcpy(buff + reqlen, postdata, postlen);
1875 inbytes_left = outbytes_left = reqlen;
1876 status = apr_xlate_conv_buffer(to_ascii, request, &inbytes_left,
1877 request, &outbytes_left);
1878 if (status || inbytes_left || outbytes_left) {
1879 fprintf(stderr, "only simple translation is supported (%d/%"
1880 APR_SIZE_T_FMT "/%" APR_SIZE_T_FMT ")\n",
1881 status, inbytes_left, outbytes_left);
1884 #endif /* NOT_ASCII */
1887 /* This only needs to be done once */
1888 if ((rv = apr_sockaddr_info_get(&mysa, myhost, APR_UNSPEC, 0, 0, cntxt)) != APR_SUCCESS) {
1890 apr_snprintf(buf, sizeof(buf),
1891 "apr_sockaddr_info_get() for %s", myhost);
1897 if ((rv = apr_sockaddr_info_get(&destsa, connecthost,
1898 myhost ? mysa->family : APR_UNSPEC,
1899 connectport, 0, cntxt))
1902 apr_snprintf(buf, sizeof(buf),
1903 "apr_sockaddr_info_get() for %s", connecthost);
1907 /* ok - lets start */
1908 start = lasttime = apr_time_now();
1909 stoptime = tlimit ? (start + apr_time_from_sec(tlimit)) : AB_MAX;
1912 /* Output the results if the user terminates the run early. */
1913 apr_signal(SIGINT, output_results);
1916 /* initialise first connection to determine destination socket address
1917 * which should be used for next connections. */
1919 start_connect(&con[0]);
1923 const apr_pollfd_t *pollresults, *pollfd;
1927 status = apr_pollset_poll(readbits, aprtimeout, &n, &pollresults);
1928 } while (APR_STATUS_IS_EINTR(status));
1929 if (status != APR_SUCCESS)
1930 apr_err("apr_pollset_poll", status);
1932 for (i = 0, pollfd = pollresults; i < n; i++, pollfd++) {
1933 struct connection *c;
1935 c = pollfd->client_data;
1938 * If the connection isn't connected how can we check it?
1940 if (c->state == STATE_UNCONNECTED)
1943 rtnev = pollfd->rtnevents;
1946 if (c->state == STATE_CONNECTED && c->ssl && SSL_in_init(c->ssl)) {
1947 ssl_proceed_handshake(c);
1953 * Notes: APR_POLLHUP is set after FIN is received on some
1954 * systems, so treat that like APR_POLLIN so that we try to read
1957 * Some systems return APR_POLLERR with APR_POLLHUP. We need to
1958 * call read_connection() for APR_POLLHUP, so check for
1959 * APR_POLLHUP first so that a closed connection isn't treated
1960 * like an I/O error. If it is, we never figure out that the
1961 * connection is done and we loop here endlessly calling
1964 if ((rtnev & APR_POLLIN) || (rtnev & APR_POLLPRI) || (rtnev & APR_POLLHUP))
1966 if ((rtnev & APR_POLLERR) || (rtnev & APR_POLLNVAL)) {
1967 if (destsa->next && c->state == STATE_CONNECTING && good == 0) {
1968 destsa = destsa->next;
1974 /* avoid apr_poll/EINPROGRESS loop on HP-UX, let recv discover ECONNREFUSED */
1975 if (c->state == STATE_CONNECTING) {
1984 if (rtnev & APR_POLLOUT) {
1985 if (c->state == STATE_CONNECTING) {
1986 rv = apr_socket_connect(c->aprsock, destsa);
1987 if (rv != APR_SUCCESS) {
1988 set_conn_state(c, STATE_UNCONNECTED);
1989 apr_socket_close(c->aprsock);
1993 "\nTest aborted after 10 failures\n\n");
1994 apr_err("apr_socket_connect()", rv);
2000 set_conn_state(c, STATE_CONNECTED);
2003 ssl_proceed_handshake(c);
2014 } while (lasttime < stoptime && done < requests);
2017 fprintf(stderr, "Finished %d requests\n", done);
2022 output_html_results();
2027 /* ------------------------------------------------------- */
2029 /* display copyright information */
2030 static void copyright(void)
2033 printf("This is ApacheBench, Version %s\n", AP_AB_BASEREVISION " <$Revision$>");
2034 printf("Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/\n");
2035 printf("Licensed to The Apache Software Foundation, http://www.apache.org/\n");
2040 printf(" This is ApacheBench, Version %s <i><%s></i><br>\n", AP_AB_BASEREVISION, "$Revision$");
2041 printf(" Copyright 1996 Adam Twiss, Zeus Technology Ltd, http://www.zeustech.net/<br>\n");
2042 printf(" Licensed to The Apache Software Foundation, http://www.apache.org/<br>\n");
2043 printf("</p>\n<p>\n");
2047 /* display usage information */
2048 static void usage(const char *progname)
2050 fprintf(stderr, "Usage: %s [options] [http"
2054 "://]hostname[:port]/path\n", progname);
2055 /* 80 column ruler: ********************************************************************************
2057 fprintf(stderr, "Options are:\n");
2058 fprintf(stderr, " -n requests Number of requests to perform\n");
2059 fprintf(stderr, " -c concurrency Number of multiple requests to make at a time\n");
2060 fprintf(stderr, " -t timelimit Seconds to max. to spend on benchmarking\n");
2061 fprintf(stderr, " This implies -n 50000\n");
2062 fprintf(stderr, " -s timeout Seconds to max. wait for each response\n");
2063 fprintf(stderr, " Default is 30 seconds\n");
2064 fprintf(stderr, " -b windowsize Size of TCP send/receive buffer, in bytes\n");
2065 fprintf(stderr, " -B address Address to bind to when making outgoing connections\n");
2066 fprintf(stderr, " -p postfile File containing data to POST. Remember also to set -T\n");
2067 fprintf(stderr, " -u putfile File containing data to PUT. Remember also to set -T\n");
2068 fprintf(stderr, " -T content-type Content-type header to use for POST/PUT data, eg.\n");
2069 fprintf(stderr, " 'application/x-www-form-urlencoded'\n");
2070 fprintf(stderr, " Default is 'text/plain'\n");
2071 fprintf(stderr, " -v verbosity How much troubleshooting info to print\n");
2072 fprintf(stderr, " -w Print out results in HTML tables\n");
2073 fprintf(stderr, " -i Use HEAD instead of GET\n");
2074 fprintf(stderr, " -x attributes String to insert as table attributes\n");
2075 fprintf(stderr, " -y attributes String to insert as tr attributes\n");
2076 fprintf(stderr, " -z attributes String to insert as td or th attributes\n");
2077 fprintf(stderr, " -C attribute Add cookie, eg. 'Apache=1234'. (repeatable)\n");
2078 fprintf(stderr, " -H attribute Add Arbitrary header line, eg. 'Accept-Encoding: gzip'\n");
2079 fprintf(stderr, " Inserted after all normal header lines. (repeatable)\n");
2080 fprintf(stderr, " -A attribute Add Basic WWW Authentication, the attributes\n");
2081 fprintf(stderr, " are a colon separated username and password.\n");
2082 fprintf(stderr, " -P attribute Add Basic Proxy Authentication, the attributes\n");
2083 fprintf(stderr, " are a colon separated username and password.\n");
2084 fprintf(stderr, " -X proxy:port Proxyserver and port number to use\n");
2085 fprintf(stderr, " -V Print version number and exit\n");
2086 fprintf(stderr, " -k Use HTTP KeepAlive feature\n");
2087 fprintf(stderr, " -d Do not show percentiles served table.\n");
2088 fprintf(stderr, " -S Do not show confidence estimators and warnings.\n");
2089 fprintf(stderr, " -q Do not show progress when doing more than 150 requests\n");
2090 fprintf(stderr, " -l Accept variable document length (use this for dynamic pages)\n");
2091 fprintf(stderr, " -g filename Output collected data to gnuplot format file.\n");
2092 fprintf(stderr, " -e filename Output CSV file with percentages served\n");
2093 fprintf(stderr, " -r Don't exit on socket receive errors.\n");
2094 fprintf(stderr, " -m method Method name\n");
2095 fprintf(stderr, " -h Display usage information (this message)\n");
2098 #ifndef OPENSSL_NO_SSL2
2099 #define SSL2_HELP_MSG "SSL2, "
2101 #define SSL2_HELP_MSG ""
2104 #ifndef OPENSSL_NO_SSL3
2105 #define SSL3_HELP_MSG "SSL3, "
2107 #define SSL3_HELP_MSG ""
2111 #define TLS1_X_HELP_MSG ", TLS1.1, TLS1.2"
2113 #define TLS1_X_HELP_MSG ""
2117 fprintf(stderr, " -I Disable TLS Server Name Indication (SNI) extension\n");
2119 fprintf(stderr, " -Z ciphersuite Specify SSL/TLS cipher suite (See openssl ciphers)\n");
2120 fprintf(stderr, " -f protocol Specify SSL/TLS protocol\n");
2121 fprintf(stderr, " (" SSL2_HELP_MSG SSL3_HELP_MSG "TLS1" TLS1_X_HELP_MSG " or ALL)\n");
2126 /* ------------------------------------------------------- */
2128 /* split URL into parts */
2130 static int parse_url(const char *url)
2137 /* Save a copy for the proxy */
2138 fullurl = apr_pstrdup(cntxt, url);
2140 if (strlen(url) > 7 && strncmp(url, "http://", 7) == 0) {
2148 if (strlen(url) > 8 && strncmp(url, "https://", 8) == 0) {
2153 if (strlen(url) > 8 && strncmp(url, "https://", 8) == 0) {
2154 fprintf(stderr, "SSL not compiled in; no https support\n");
2159 if ((cp = strchr(url, '/')) == NULL)
2161 h = apr_pstrmemdup(cntxt, url, cp - url);
2162 rv = apr_parse_addr_port(&hostname, &scope_id, &port, h, cntxt);
2163 if (rv != APR_SUCCESS || !hostname || scope_id) {
2166 path = apr_pstrdup(cntxt, cp);
2168 if (*url == '[') { /* IPv6 numeric address string */
2169 host_field = apr_psprintf(cntxt, "[%s]", hostname);
2172 host_field = hostname;
2175 if (port == 0) { /* no port specified */
2186 is_ssl && (port != 443)) || (!is_ssl &&
2190 colonhost = apr_psprintf(cntxt,":%d",port);
2196 /* ------------------------------------------------------- */
2198 /* read data to POST/PUT from file, save contents and length */
2200 static apr_status_t open_postfile(const char *pfile)
2207 rv = apr_file_open(&postfd, pfile, APR_READ, APR_OS_DEFAULT, cntxt);
2208 if (rv != APR_SUCCESS) {
2209 fprintf(stderr, "ab: Could not open POST data file (%s): %s\n", pfile,
2210 apr_strerror(rv, errmsg, sizeof errmsg));
2214 rv = apr_file_info_get(&finfo, APR_FINFO_NORM, postfd);
2215 if (rv != APR_SUCCESS) {
2216 fprintf(stderr, "ab: Could not stat POST data file (%s): %s\n", pfile,
2217 apr_strerror(rv, errmsg, sizeof errmsg));
2220 postlen = (apr_size_t)finfo.size;
2221 postdata = xmalloc(postlen);
2222 rv = apr_file_read_full(postfd, postdata, postlen, NULL);
2223 if (rv != APR_SUCCESS) {
2224 fprintf(stderr, "ab: Could not read POST data file: %s\n",
2225 apr_strerror(rv, errmsg, sizeof errmsg));
2228 apr_file_close(postfd);
2232 /* ------------------------------------------------------- */
2234 /* sort out command-line args and call test */
2235 int main(int argc, const char * const argv[])
2239 apr_status_t status;
2241 const char *opt_arg;
2243 #if OPENSSL_VERSION_NUMBER >= 0x10100000L
2244 int max_prot = TLS1_2_VERSION;
2245 #ifndef OPENSSL_NO_SSL3
2246 int min_prot = SSL3_VERSION;
2248 int min_prot = TLS1_VERSION;
2250 #endif /* #if OPENSSL_VERSION_NUMBER >= 0x10100000L */
2252 AB_SSL_METHOD_CONST SSL_METHOD *meth = SSLv23_client_method();
2255 /* table defaults */
2258 tdstring = "bgcolor=white";
2264 apr_app_initialize(&argc, &argv, NULL);
2265 atexit(apr_terminate);
2266 apr_pool_create(&cntxt, NULL);
2267 apr_pool_abort_set(abort_on_oom, cntxt);
2270 status = apr_xlate_open(&to_ascii, "ISO-8859-1", APR_DEFAULT_CHARSET, cntxt);
2272 fprintf(stderr, "apr_xlate_open(to ASCII)->%d\n", status);
2275 status = apr_xlate_open(&from_ascii, APR_DEFAULT_CHARSET, "ISO-8859-1", cntxt);
2277 fprintf(stderr, "apr_xlate_open(from ASCII)->%d\n", status);
2280 status = apr_base64init_ebcdic(to_ascii, from_ascii);
2282 fprintf(stderr, "apr_base64init_ebcdic()->%d\n", status);
2287 myhost = NULL; /* 0.0.0.0 or :: */
2289 apr_getopt_init(&opt, cntxt, argc, argv);
2290 while ((status = apr_getopt(opt, "n:c:t:s:b:T:p:u:v:lrkVhwiIx:y:z:C:H:P:A:g:X:de:SqB:m:"
2294 ,&c, &opt_arg)) == APR_SUCCESS) {
2297 requests = atoi(opt_arg);
2298 if (requests <= 0) {
2299 err("Invalid number of requests\n");
2309 concurrency = atoi(opt_arg);
2312 windowsize = atoi(opt_arg);
2315 if (method != NO_METH)
2316 err("Cannot mix HEAD with other methods\n");
2320 gnuplot = xstrdup(opt_arg);
2326 csvperc = xstrdup(opt_arg);
2332 aprtimeout = apr_time_from_sec(atoi(opt_arg)); /* timeout value */
2335 if (method != NO_METH)
2336 err("Cannot mix POST with other methods\n");
2337 if (open_postfile(opt_arg) != APR_SUCCESS) {
2344 if (method != NO_METH)
2345 err("Cannot mix PUT with other methods\n");
2346 if (open_postfile(opt_arg) != APR_SUCCESS) {
2359 verbosity = atoi(opt_arg);
2362 tlimit = atoi(opt_arg);
2363 requests = MAX_REQUESTS; /* need to size data array on
2367 content_type = apr_pstrdup(cntxt, opt_arg);
2370 cookie = apr_pstrcat(cntxt, "Cookie: ", opt_arg, "\r\n", NULL);
2374 * assume username passwd already to be in colon separated form.
2375 * Ready to be uu-encoded.
2377 while (apr_isspace(*opt_arg))
2379 if (apr_base64_encode_len(strlen(opt_arg)) > sizeof(tmp)) {
2380 err("Authentication credentials too long\n");
2382 l = apr_base64_encode(tmp, opt_arg, strlen(opt_arg));
2385 auth = apr_pstrcat(cntxt, auth, "Authorization: Basic ", tmp,
2390 * assume username passwd already to be in colon separated form.
2392 while (apr_isspace(*opt_arg))
2394 if (apr_base64_encode_len(strlen(opt_arg)) > sizeof(tmp)) {
2395 err("Proxy credentials too long\n");
2397 l = apr_base64_encode(tmp, opt_arg, strlen(opt_arg));
2400 auth = apr_pstrcat(cntxt, auth, "Proxy-Authorization: Basic ",
2404 hdrs = apr_pstrcat(cntxt, hdrs, opt_arg, "\r\n", NULL);
2406 * allow override of some of the common headers that ab adds
2408 if (strncasecmp(opt_arg, "Host:", 5) == 0) {
2412 while (apr_isspace(*opt_arg))
2414 len = strlen(opt_arg);
2415 host = strdup(opt_arg);
2416 while (len && apr_isspace(host[len-1]))
2419 } else if (strncasecmp(opt_arg, "Accept:", 7) == 0) {
2421 } else if (strncasecmp(opt_arg, "User-Agent:", 11) == 0) {
2429 * if any of the following three are used, turn on html output
2434 tablestring = opt_arg;
2440 * assume proxy-name[:port]
2442 if ((p = strchr(opt_arg, ':'))) {
2445 proxyport = atoi(p);
2447 proxyhost = apr_pstrdup(cntxt, opt_arg);
2466 myhost = apr_pstrdup(cntxt, opt_arg);
2470 ssl_cipher = strdup(opt_arg);
2473 method = CUSTOM_METHOD;
2474 method_str[CUSTOM_METHOD] = strdup(opt_arg);
2477 #if OPENSSL_VERSION_NUMBER < 0x10100000L
2478 if (strncasecmp(opt_arg, "ALL", 3) == 0) {
2479 meth = SSLv23_client_method();
2480 #ifndef OPENSSL_NO_SSL2
2481 } else if (strncasecmp(opt_arg, "SSL2", 4) == 0) {
2482 meth = SSLv2_client_method();
2487 #ifndef OPENSSL_NO_SSL3
2488 } else if (strncasecmp(opt_arg, "SSL3", 4) == 0) {
2489 meth = SSLv3_client_method();
2495 } else if (strncasecmp(opt_arg, "TLS1.1", 6) == 0) {
2496 meth = TLSv1_1_client_method();
2497 } else if (strncasecmp(opt_arg, "TLS1.2", 6) == 0) {
2498 meth = TLSv1_2_client_method();
2500 } else if (strncasecmp(opt_arg, "TLS1", 4) == 0) {
2501 meth = TLSv1_client_method();
2503 #else /* #if OPENSSL_VERSION_NUMBER < 0x10100000L */
2504 meth = TLS_client_method();
2505 if (strncasecmp(opt_arg, "ALL", 3) == 0) {
2506 max_prot = TLS1_2_VERSION;
2507 #ifndef OPENSSL_NO_SSL3
2508 min_prot = SSL3_VERSION;
2510 min_prot = TLS1_VERSION;
2512 #ifndef OPENSSL_NO_SSL3
2513 } else if (strncasecmp(opt_arg, "SSL3", 4) == 0) {
2514 max_prot = SSL3_VERSION;
2515 min_prot = SSL3_VERSION;
2517 } else if (strncasecmp(opt_arg, "TLS1.1", 6) == 0) {
2518 max_prot = TLS1_1_VERSION;
2519 min_prot = TLS1_1_VERSION;
2520 } else if (strncasecmp(opt_arg, "TLS1.2", 6) == 0) {
2521 max_prot = TLS1_2_VERSION;
2522 min_prot = TLS1_2_VERSION;
2523 } else if (strncasecmp(opt_arg, "TLS1", 4) == 0) {
2524 max_prot = TLS1_VERSION;
2525 min_prot = TLS1_VERSION;
2527 #endif /* #if OPENSSL_VERSION_NUMBER < 0x10100000L */
2538 if (opt->ind != argc - 1) {
2539 fprintf(stderr, "%s: wrong number of arguments\n", argv[0]);
2543 if (method == NO_METH) {
2547 if (parse_url(apr_pstrdup(cntxt, opt->argv[opt->ind++]))) {
2548 fprintf(stderr, "%s: invalid URL\n", argv[0]);
2552 if ((concurrency < 0) || (concurrency > MAX_CONCURRENCY)) {
2553 fprintf(stderr, "%s: Invalid Concurrency [Range 0..%d]\n",
2554 argv[0], MAX_CONCURRENCY);
2558 if (concurrency > requests) {
2559 fprintf(stderr, "%s: Cannot use concurrency level greater than "
2560 "total number of requests\n", argv[0]);
2564 if ((heartbeatres) && (requests > 150)) {
2565 heartbeatres = requests / 10; /* Print line every 10% of requests */
2566 if (heartbeatres < 100)
2567 heartbeatres = 100; /* but never more often than once every 100
2577 #if OPENSSL_VERSION_NUMBER < 0x10100000L
2578 CRYPTO_malloc_init();
2580 OPENSSL_malloc_init();
2583 SSL_load_error_strings();
2585 bio_out=BIO_new_fp(stdout,BIO_NOCLOSE);
2586 bio_err=BIO_new_fp(stderr,BIO_NOCLOSE);
2588 if (!(ssl_ctx = SSL_CTX_new(meth))) {
2589 BIO_printf(bio_err, "Could not initialize SSL Context.\n");
2590 ERR_print_errors(bio_err);
2593 SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL);
2594 #if OPENSSL_VERSION_NUMBER >= 0x10100000L
2595 SSL_CTX_set_max_proto_version(ssl_ctx, max_prot);
2596 SSL_CTX_set_min_proto_version(ssl_ctx, min_prot);
2598 #ifdef SSL_MODE_RELEASE_BUFFERS
2599 /* Keep memory usage as low as possible */
2600 SSL_CTX_set_mode (ssl_ctx, SSL_MODE_RELEASE_BUFFERS);
2602 if (ssl_cipher != NULL) {
2603 if (!SSL_CTX_set_cipher_list(ssl_ctx, ssl_cipher)) {
2604 fprintf(stderr, "error setting cipher list [%s]\n", ssl_cipher);
2605 ERR_print_errors_fp(stderr);
2609 if (verbosity >= 3) {
2610 SSL_CTX_set_info_callback(ssl_ctx, ssl_state_cb);
2614 apr_signal(SIGPIPE, SIG_IGN); /* Ignore writes to connections that
2615 * have been closed at the other end. */
2619 apr_pool_destroy(cntxt);