1 /*-------------------------------------------------------------------------
4 * Definitions for planner's internal data structures.
7 * Portions Copyright (c) 1996-2003, PostgreSQL Global Development Group
8 * Portions Copyright (c) 1994, Regents of the University of California
10 * $PostgreSQL: pgsql/src/include/nodes/relation.h,v 1.97 2004/08/04 21:34:24 tgl Exp $
12 *-------------------------------------------------------------------------
17 #include "access/sdir.h"
18 #include "nodes/bitmapset.h"
19 #include "nodes/parsenodes.h"
24 * Set of relation identifiers (indexes into the rangetable).
27 typedef Bitmapset *Relids;
30 * When looking for a "cheapest path", this enum specifies whether we want
31 * cheapest startup cost or cheapest total cost.
33 typedef enum CostSelector
35 STARTUP_COST, TOTAL_COST
39 * The cost estimate produced by cost_qual_eval() includes both a one-time
40 * (startup) cost, and a per-tuple cost.
42 typedef struct QualCost
44 Cost startup; /* one-time cost */
45 Cost per_tuple; /* per-evaluation cost */
50 * Per-relation information for planning/optimization
52 * For planning purposes, a "base rel" is either a plain relation (a table)
53 * or the output of a sub-SELECT or function that appears in the range table.
54 * In either case it is uniquely identified by an RT index. A "joinrel"
55 * is the joining of two or more base rels. A joinrel is identified by
56 * the set of RT indexes for its component baserels. We create RelOptInfo
57 * nodes for each baserel and joinrel, and store them in the Query's
58 * base_rel_list and join_rel_list respectively.
60 * Note that there is only one joinrel for any given set of component
61 * baserels, no matter what order we assemble them in; so an unordered
62 * set is the right datatype to identify it with.
64 * We also have "other rels", which are like base rels in that they refer to
65 * single RT indexes; but they are not part of the join tree, and are stored
66 * in other_rel_list not base_rel_list.
68 * Currently the only kind of otherrels are those made for child relations
69 * of an inheritance scan (SELECT FROM foo*). The parent table's RTE and
70 * corresponding baserel represent the whole result of the inheritance scan.
71 * The planner creates separate RTEs and associated RelOptInfos for each child
72 * table (including the parent table, in its capacity as a member of the
73 * inheritance set). These RelOptInfos are physically identical to baserels,
74 * but are otherrels because they are not in the main join tree. These added
75 * RTEs and otherrels are used to plan the scans of the individual tables in
76 * the inheritance set; then the parent baserel is given an Append plan
77 * comprising the best plans for the individual child tables.
79 * At one time we also made otherrels to represent join RTEs, for use in
80 * handling join alias Vars. Currently this is not needed because all join
81 * alias Vars are expanded to non-aliased form during preprocess_expression.
83 * Parts of this data structure are specific to various scan and join
84 * mechanisms. It didn't seem worth creating new node types for them.
86 * relids - Set of base-relation identifiers; it is a base relation
87 * if there is just one, a join relation if more than one
88 * rows - estimated number of tuples in the relation after restriction
89 * clauses have been applied (ie, output rows of a plan for it)
90 * width - avg. number of bytes per tuple in the relation after the
91 * appropriate projections have been done (ie, output width)
92 * reltargetlist - List of Var nodes for the attributes we need to
93 * output from this relation (in no particular order)
94 * NOTE: in a child relation, may contain RowExprs
95 * pathlist - List of Path nodes, one for each potentially useful
96 * method of generating the relation
97 * cheapest_startup_path - the pathlist member with lowest startup cost
98 * (regardless of its ordering)
99 * cheapest_total_path - the pathlist member with lowest total cost
100 * (regardless of its ordering)
101 * cheapest_unique_path - for caching cheapest path to produce unique
102 * (no duplicates) output from relation
104 * If the relation is a base relation it will have these fields set:
106 * relid - RTE index (this is redundant with the relids field, but
107 * is provided for convenience of access)
108 * rtekind - distinguishes plain relation, subquery, or function RTE
109 * min_attr, max_attr - range of valid AttrNumbers for rel
110 * attr_needed - array of bitmapsets indicating the highest joinrel
111 * in which each attribute is needed; if bit 0 is set then
112 * the attribute is needed as part of final targetlist
113 * attr_widths - cache space for per-attribute width estimates;
114 * zero means not computed yet
115 * indexlist - list of IndexOptInfo nodes for relation's indexes
116 * (always NIL if it's not a table)
117 * pages - number of disk pages in relation (zero if not a table)
118 * tuples - number of tuples in relation (not considering restrictions)
119 * subplan - plan for subquery (NULL if it's not a subquery)
121 * Note: for a subquery, tuples and subplan are not set immediately
122 * upon creation of the RelOptInfo object; they are filled in when
123 * set_base_rel_pathlist processes the object.
125 * For otherrels that are inheritance children, these fields are filled
126 * in just as for a baserel.
128 * The presence of the remaining fields depends on the restrictions
129 * and joins that the relation participates in:
131 * baserestrictinfo - List of RestrictInfo nodes, containing info about
132 * each qualification clause in which this relation
133 * participates (only used for base rels)
134 * baserestrictcost - Estimated cost of evaluating the baserestrictinfo
135 * clauses at a single tuple (only used for base rels)
136 * outerjoinset - For a base rel: if the rel appears within the nullable
137 * side of an outer join, the set of all relids
138 * participating in the highest such outer join; else NULL.
140 * joininfo - List of JoinInfo nodes, containing info about each join
141 * clause in which this relation participates
142 * index_outer_relids - only used for base rels; set of outer relids
143 * that participate in indexable joinclauses for this rel
144 * index_inner_paths - only used for base rels; list of InnerIndexscanInfo
145 * nodes showing best indexpaths for various subsets of
146 * index_outer_relids.
148 * Note: Keeping a restrictinfo list in the RelOptInfo is useful only for
149 * base rels, because for a join rel the set of clauses that are treated as
150 * restrict clauses varies depending on which sub-relations we choose to join.
151 * (For example, in a 3-base-rel join, a clause relating rels 1 and 2 must be
152 * treated as a restrictclause if we join {1} and {2 3} to make {1 2 3}; but
153 * if we join {1 2} and {3} then that clause will be a restrictclause in {1 2}
154 * and should not be processed again at the level of {1 2 3}.) Therefore,
155 * the restrictinfo list in the join case appears in individual JoinPaths
156 * (field joinrestrictinfo), not in the parent relation. But it's OK for
157 * the RelOptInfo to store the joininfo lists, because those are the same
158 * for a given rel no matter how we form it.
160 * We store baserestrictcost in the RelOptInfo (for base relations) because
161 * we know we will need it at least once (to price the sequential scan)
162 * and may need it multiple times to price index scans.
164 * outerjoinset is used to ensure correct placement of WHERE clauses that
165 * apply to outer-joined relations; we must not apply such WHERE clauses
166 * until after the outer join is performed.
169 typedef enum RelOptKind
173 RELOPT_OTHER_CHILD_REL
176 typedef struct RelOptInfo
180 RelOptKind reloptkind;
182 /* all relations included in this RelOptInfo */
183 Relids relids; /* set of base relids (rangetable indexes) */
185 /* size estimates generated by planner */
186 double rows; /* estimated number of result tuples */
187 int width; /* estimated avg width of result tuples */
189 /* materialization information */
190 List *reltargetlist; /* needed Vars */
191 List *pathlist; /* Path structures */
192 struct Path *cheapest_startup_path;
193 struct Path *cheapest_total_path;
194 struct Path *cheapest_unique_path;
196 /* information about a base rel (not set for join rels!) */
198 RTEKind rtekind; /* RELATION, SUBQUERY, or FUNCTION */
199 AttrNumber min_attr; /* smallest attrno of rel (often <0) */
200 AttrNumber max_attr; /* largest attrno of rel */
201 Relids *attr_needed; /* array indexed [min_attr .. max_attr] */
202 int32 *attr_widths; /* array indexed [min_attr .. max_attr] */
206 struct Plan *subplan; /* if subquery */
208 /* used by various scans and joins: */
209 List *baserestrictinfo; /* RestrictInfo structures (if
211 QualCost baserestrictcost; /* cost of evaluating the above */
212 Relids outerjoinset; /* set of base relids */
213 List *joininfo; /* JoinInfo structures */
215 /* cached info about inner indexscan paths for relation: */
216 Relids index_outer_relids; /* other relids in indexable join
218 List *index_inner_paths; /* InnerIndexscanInfo nodes */
221 * Inner indexscans are not in the main pathlist because they are not
222 * usable except in specific join contexts. We use the
223 * index_inner_paths list just to avoid recomputing the best inner
224 * indexscan repeatedly for similar outer relations. See comments for
225 * InnerIndexscanInfo.
231 * Per-index information for planning/optimization
233 * Prior to Postgres 7.0, RelOptInfo was used to describe both relations
234 * and indexes, but that created confusion without actually doing anything
235 * useful. So now we have a separate IndexOptInfo struct for indexes.
237 * classlist[], indexkeys[], and ordering[] have ncolumns entries.
238 * Zeroes in the indexkeys[] array indicate index columns that are
239 * expressions; there is one element in indexprs for each such column.
241 * Note: for historical reasons, the classlist and ordering arrays have
242 * an extra entry that is always zero. Some code scans until it sees a
243 * zero entry, rather than looking at ncolumns.
245 * The indexprs and indpred expressions have been run through
246 * prepqual.c and eval_const_expressions() for ease of matching to
247 * WHERE clauses. indpred is in implicit-AND form.
250 typedef struct IndexOptInfo
254 Oid indexoid; /* OID of the index relation */
256 /* statistics from pg_class */
257 long pages; /* number of disk pages in index */
258 double tuples; /* number of index tuples in index */
260 /* index descriptor information */
261 int ncolumns; /* number of columns in index */
262 Oid *classlist; /* OIDs of operator classes for columns */
263 int *indexkeys; /* column numbers of index's keys, or 0 */
264 Oid *ordering; /* OIDs of sort operators for each column */
265 Oid relam; /* OID of the access method (in pg_am) */
267 RegProcedure amcostestimate; /* OID of the access method's cost fcn */
269 List *indexprs; /* expressions for non-simple index
271 List *indpred; /* predicate if a partial index, else NIL */
273 bool predOK; /* true if predicate matches query */
274 bool unique; /* true if a unique index */
276 /* cached info about inner indexscan paths for index */
277 Relids outer_relids; /* other relids in usable join clauses */
278 List *inner_paths; /* List of InnerIndexscanInfo nodes */
285 * The sort ordering of a path is represented by a list of sublists of
286 * PathKeyItem nodes. An empty list implies no known ordering. Otherwise
287 * the first sublist represents the primary sort key, the second the
288 * first secondary sort key, etc. Each sublist contains one or more
289 * PathKeyItem nodes, each of which can be taken as the attribute that
290 * appears at that sort position. (See the top of optimizer/path/pathkeys.c
291 * for more information.)
294 typedef struct PathKeyItem
298 Node *key; /* the item that is ordered */
299 Oid sortop; /* the ordering operator ('<' op) */
302 * key typically points to a Var node, ie a relation attribute, but it
303 * can also point to an arbitrary expression representing the value
304 * indexed by an index expression.
309 * Type "Path" is used as-is for sequential-scan paths. For other
310 * path types it is the first component of a larger struct.
312 * Note: "pathtype" is the NodeTag of the Plan node we could build from this
313 * Path. It is partially redundant with the Path's NodeTag, but allows us
314 * to use the same Path type for multiple Plan types where there is no need
315 * to distinguish the Plan type during path processing.
322 NodeTag pathtype; /* tag identifying scan/join method */
324 RelOptInfo *parent; /* the relation this path can build */
326 /* estimated execution costs for path (see costsize.c for more info) */
327 Cost startup_cost; /* cost expended before fetching any
329 Cost total_cost; /* total cost (assuming all tuples
332 List *pathkeys; /* sort ordering of path's output */
333 /* pathkeys is a List of Lists of PathKeyItem nodes; see above */
337 * IndexPath represents an index scan. Although an indexscan can only read
338 * a single relation, it can scan it more than once, potentially using a
339 * different index during each scan. The result is the union (OR) of all the
340 * tuples matched during any scan. (The executor is smart enough not to return
341 * the same tuple more than once, even if it is matched in multiple scans.)
343 * 'indexinfo' is a list of IndexOptInfo nodes, one per scan to be performed.
345 * 'indexclauses' is a list of index qualifications, also one per scan.
346 * Each entry in 'indexclauses' is a sublist of qualification clauses to be
347 * used for that scan, with implicit AND semantics across the sublist items.
348 * NOTE that the semantics of the top-level list in 'indexclauses' is OR
349 * combination, while the sublists are implicitly AND combinations!
351 * 'indexquals' has the same structure as 'indexclauses', but it contains
352 * the actual indexqual conditions that can be used with the index(es).
353 * In simple cases this is identical to 'indexclauses', but when special
354 * indexable operators appear in 'indexclauses', they are replaced by the
355 * derived indexscannable conditions in 'indexquals'.
357 * Both 'indexclauses' and 'indexquals' are lists of sublists of RestrictInfo
358 * nodes. (Before 8.0, we kept bare operator expressions in these lists, but
359 * storing RestrictInfos is more efficient since selectivities can be cached.)
361 * 'isjoininner' is TRUE if the path is a nestloop inner scan (that is,
362 * some of the index conditions are join rather than restriction clauses).
364 * 'indexscandir' is one of:
365 * ForwardScanDirection: forward scan of an ordered index
366 * BackwardScanDirection: backward scan of an ordered index
367 * NoMovementScanDirection: scan of an unordered index, or don't care
368 * (The executor doesn't care whether it gets ForwardScanDirection or
369 * NoMovementScanDirection for an indexscan, but the planner wants to
370 * distinguish ordered from unordered indexes for building pathkeys.)
372 * 'rows' is the estimated result tuple count for the indexscan. This
373 * is the same as path.parent->rows for a simple indexscan, but it is
374 * different for a nestloop inner scan, because the additional indexquals
375 * coming from join clauses make the scan more selective than the parent
376 * rel's restrict clauses alone would do.
379 typedef struct IndexPath
386 ScanDirection indexscandir;
387 double rows; /* estimated number of result tuples */
391 * TidPath represents a scan by TID
393 * tideval is an implicitly OR'ed list of quals of the form CTID = something.
394 * Note they are bare quals, not RestrictInfos.
396 typedef struct TidPath
399 List *tideval; /* qual(s) involving CTID = something */
403 * AppendPath represents an Append plan, ie, successive execution of
404 * several member plans. Currently it is only used to handle expansion
405 * of inheritance trees.
407 typedef struct AppendPath
410 List *subpaths; /* list of component Paths */
414 * ResultPath represents use of a Result plan node, either to compute a
415 * variable-free targetlist or to gate execution of a subplan with a
416 * one-time (variable-free) qual condition. Note that in the former case
417 * path.parent will be NULL; in the latter case it is copied from the subpath.
419 * Note that constantqual is a list of bare clauses, not RestrictInfos.
421 typedef struct ResultPath
429 * MaterialPath represents use of a Material plan node, i.e., caching of
430 * the output of its subpath. This is used when the subpath is expensive
431 * and needs to be scanned repeatedly, or when we need mark/restore ability
432 * and the subpath doesn't have it.
434 typedef struct MaterialPath
441 * UniquePath represents elimination of distinct rows from the output of
444 * This is unlike the other Path nodes in that it can actually generate
445 * different plans: either hash-based or sort-based implementation, or a
446 * no-op if the input path can be proven distinct already. The decision
447 * is sufficiently localized that it's not worth having separate Path node
448 * types. (Note: in the no-op case, we could eliminate the UniquePath node
449 * entirely and just return the subpath; but it's convenient to have a
450 * UniquePath in the path tree to signal upper-level routines that the input
451 * is known distinct.)
455 UNIQUE_PATH_NOOP, /* input is known unique already */
456 UNIQUE_PATH_HASH, /* use hashing */
457 UNIQUE_PATH_SORT /* use sorting */
460 typedef struct UniquePath
464 UniquePathMethod umethod;
465 double rows; /* estimated number of result tuples */
469 * All join-type paths share these fields.
472 typedef struct JoinPath
478 Path *outerjoinpath; /* path for the outer side of the join */
479 Path *innerjoinpath; /* path for the inner side of the join */
481 List *joinrestrictinfo; /* RestrictInfos to apply to join */
484 * See the notes for RelOptInfo to understand why joinrestrictinfo is
485 * needed in JoinPath, and can't be merged into the parent RelOptInfo.
490 * A nested-loop path needs no special fields.
493 typedef JoinPath NestPath;
496 * A mergejoin path has these fields.
498 * path_mergeclauses lists the clauses (in the form of RestrictInfos)
499 * that will be used in the merge.
501 * Note that the mergeclauses are a subset of the parent relation's
502 * restriction-clause list. Any join clauses that are not mergejoinable
503 * appear only in the parent's restrict list, and must be checked by a
504 * qpqual at execution time.
506 * outersortkeys (resp. innersortkeys) is NIL if the outer path
507 * (resp. inner path) is already ordered appropriately for the
508 * mergejoin. If it is not NIL then it is a PathKeys list describing
509 * the ordering that must be created by an explicit sort step.
512 typedef struct MergePath
515 List *path_mergeclauses; /* join clauses to be used for
517 List *outersortkeys; /* keys for explicit sort, if any */
518 List *innersortkeys; /* keys for explicit sort, if any */
522 * A hashjoin path has these fields.
524 * The remarks above for mergeclauses apply for hashclauses as well.
526 * Hashjoin does not care what order its inputs appear in, so we have
527 * no need for sortkeys.
530 typedef struct HashPath
533 List *path_hashclauses; /* join clauses used for hashing */
537 * Restriction clause info.
539 * We create one of these for each AND sub-clause of a restriction condition
540 * (WHERE or JOIN/ON clause). Since the restriction clauses are logically
541 * ANDed, we can use any one of them or any subset of them to filter out
542 * tuples, without having to evaluate the rest. The RestrictInfo node itself
543 * stores data used by the optimizer while choosing the best query plan.
545 * If a restriction clause references a single base relation, it will appear
546 * in the baserestrictinfo list of the RelOptInfo for that base rel.
548 * If a restriction clause references more than one base rel, it will
549 * appear in the JoinInfo lists of every RelOptInfo that describes a strict
550 * subset of the base rels mentioned in the clause. The JoinInfo lists are
551 * used to drive join tree building by selecting plausible join candidates.
552 * The clause cannot actually be applied until we have built a join rel
553 * containing all the base rels it references, however.
555 * When we construct a join rel that includes all the base rels referenced
556 * in a multi-relation restriction clause, we place that clause into the
557 * joinrestrictinfo lists of paths for the join rel, if neither left nor
558 * right sub-path includes all base rels referenced in the clause. The clause
559 * will be applied at that join level, and will not propagate any further up
560 * the join tree. (Note: the "predicate migration" code was once intended to
561 * push restriction clauses up and down the plan tree based on evaluation
562 * costs, but it's dead code and is unlikely to be resurrected in the
563 * foreseeable future.)
565 * Note that in the presence of more than two rels, a multi-rel restriction
566 * might reach different heights in the join tree depending on the join
567 * sequence we use. So, these clauses cannot be associated directly with
568 * the join RelOptInfo, but must be kept track of on a per-join-path basis.
570 * When dealing with outer joins we have to be very careful about pushing qual
571 * clauses up and down the tree. An outer join's own JOIN/ON conditions must
572 * be evaluated exactly at that join node, and any quals appearing in WHERE or
573 * in a JOIN above the outer join cannot be pushed down below the outer join.
574 * Otherwise the outer join will produce wrong results because it will see the
575 * wrong sets of input rows. All quals are stored as RestrictInfo nodes
576 * during planning, but there's a flag to indicate whether a qual has been
577 * pushed down to a lower level than its original syntactic placement in the
578 * join tree would suggest. If an outer join prevents us from pushing a qual
579 * down to its "natural" semantic level (the level associated with just the
580 * base rels used in the qual) then the qual will appear in JoinInfo lists
581 * that reference more than just the base rels it actually uses. By
582 * pretending that the qual references all the rels appearing in the outer
583 * join, we prevent it from being evaluated below the outer join's joinrel.
584 * When we do form the outer join's joinrel, we still need to distinguish
585 * those quals that are actually in that join's JOIN/ON condition from those
586 * that appeared higher in the tree and were pushed down to the join rel
587 * because they used no other rels. That's what the is_pushed_down flag is
588 * for; it tells us that a qual came from a point above the join of the
589 * specific set of base rels that it uses (or that the JoinInfo structures
590 * claim it uses). A clause that originally came from WHERE will *always*
591 * have its is_pushed_down flag set; a clause that came from an INNER JOIN
592 * condition, but doesn't use all the rels being joined, will also have
593 * is_pushed_down set because it will get attached to some lower joinrel.
595 * We also store a valid_everywhere flag, which says that the clause is not
596 * affected by any lower-level outer join, and therefore any conditions it
597 * asserts can be presumed true throughout the plan tree.
599 * In general, the referenced clause might be arbitrarily complex. The
600 * kinds of clauses we can handle as indexscan quals, mergejoin clauses,
601 * or hashjoin clauses are fairly limited --- the code for each kind of
602 * path is responsible for identifying the restrict clauses it can use
603 * and ignoring the rest. Clauses not implemented by an indexscan,
604 * mergejoin, or hashjoin will be placed in the plan qual or joinqual field
605 * of the finished Plan node, where they will be enforced by general-purpose
606 * qual-expression-evaluation code. (But we are still entitled to count
607 * their selectivity when estimating the result tuple count, if we
608 * can guess what it is...)
610 * When the referenced clause is an OR clause, we generate a modified copy
611 * in which additional RestrictInfo nodes are inserted below the top-level
612 * OR/AND structure. This is a convenience for OR indexscan processing:
613 * indexquals taken from either the top level or an OR subclause will have
614 * associated RestrictInfo nodes.
617 typedef struct RestrictInfo
621 Expr *clause; /* the represented clause of WHERE or JOIN */
623 bool is_pushed_down; /* TRUE if clause was pushed down in level */
625 bool valid_everywhere; /* TRUE if valid on every level */
628 * This flag is set true if the clause looks potentially useful as a
629 * merge or hash join clause, that is if it is a binary opclause with
630 * nonoverlapping sets of relids referenced in the left and right sides.
631 * (Whether the operator is actually merge or hash joinable isn't
636 /* The set of relids (varnos) referenced in the clause: */
637 Relids clause_relids;
639 /* These fields are set for any binary opclause: */
640 Relids left_relids; /* relids in left side of clause */
641 Relids right_relids; /* relids in right side of clause */
643 /* This field is NULL unless clause is an OR clause: */
644 Expr *orclause; /* modified clause with RestrictInfos */
646 /* cache space for cost and selectivity */
647 QualCost eval_cost; /* eval cost of clause; -1 if not yet set */
648 Selectivity this_selec; /* selectivity; -1 if not yet set */
650 /* valid if clause is mergejoinable, else InvalidOid: */
651 Oid mergejoinoperator; /* copy of clause operator */
652 Oid left_sortop; /* leftside sortop needed for mergejoin */
653 Oid right_sortop; /* rightside sortop needed for mergejoin */
655 /* cache space for mergeclause processing; NIL if not yet set */
656 List *left_pathkey; /* canonical pathkey for left side */
657 List *right_pathkey; /* canonical pathkey for right side */
659 /* cache space for mergeclause processing; -1 if not yet set */
660 Selectivity left_mergescansel; /* fraction of left side to scan */
661 Selectivity right_mergescansel; /* fraction of right side to scan */
663 /* valid if clause is hashjoinable, else InvalidOid: */
664 Oid hashjoinoperator; /* copy of clause operator */
666 /* cache space for hashclause processing; -1 if not yet set */
667 Selectivity left_bucketsize; /* avg bucketsize of left side */
668 Selectivity right_bucketsize; /* avg bucketsize of right side */
674 * We make a list of these for each RelOptInfo, containing info about
675 * all the join clauses this RelOptInfo participates in. (For this
676 * purpose, a "join clause" is a WHERE clause that mentions both vars
677 * belonging to this relation and vars belonging to relations not yet
678 * joined to it.) We group these clauses according to the set of
679 * other base relations (unjoined relations) mentioned in them.
680 * There is one JoinInfo for each distinct set of unjoined_relids,
681 * and its jinfo_restrictinfo lists the clause(s) that use that set
682 * of other relations.
685 typedef struct JoinInfo
688 Relids unjoined_relids; /* some rels not yet part of my RelOptInfo */
689 List *jinfo_restrictinfo; /* relevant RestrictInfos */
693 * Inner indexscan info.
695 * An inner indexscan is one that uses one or more joinclauses as index
696 * conditions (perhaps in addition to plain restriction clauses). So it
697 * can only be used as the inner path of a nestloop join where the outer
698 * relation includes all other relids appearing in those joinclauses.
699 * The set of usable joinclauses, and thus the best inner indexscan,
700 * thus varies depending on which outer relation we consider; so we have
701 * to recompute the best such path for every join. To avoid lots of
702 * redundant computation, we cache the results of such searches. For
703 * each index we compute the set of possible otherrelids (all relids
704 * appearing in joinquals that could become indexquals for this index).
705 * Two outer relations whose relids have the same intersection with this
706 * set will have the same set of available joinclauses and thus the same
707 * best inner indexscan for that index. Similarly, for each base relation,
708 * we form the union of the per-index otherrelids sets. Two outer relations
709 * with the same intersection with that set will have the same best overall
710 * inner indexscan for the base relation. We use lists of InnerIndexscanInfo
711 * nodes to cache the results of these searches at both the index and
714 * The search key also includes a bool showing whether the join being
715 * considered is an outer join. Since we constrain the join order for
716 * outer joins, I believe that this bool can only have one possible value
717 * for any particular base relation; but store it anyway to avoid confusion.
720 typedef struct InnerIndexscanInfo
723 /* The lookup key: */
724 Relids other_relids; /* a set of relevant other relids */
725 bool isouterjoin; /* true if join is outer */
726 /* Best path for this lookup key: */
727 Path *best_innerpath; /* best inner indexscan, or NULL if none */
728 } InnerIndexscanInfo;
733 * When we convert top-level IN quals into join operations, we must restrict
734 * the order of joining and use special join methods at some join points.
735 * We record information about each such IN clause in an InClauseInfo struct.
736 * These structs are kept in the Query node's in_info_list.
739 typedef struct InClauseInfo
742 Relids lefthand; /* base relids in lefthand expressions */
743 Relids righthand; /* base relids coming from the subselect */
744 List *sub_targetlist; /* targetlist of original RHS subquery */
747 * Note: sub_targetlist is just a list of Vars or expressions; it does
748 * not contain TargetEntry nodes.
752 #endif /* RELATION_H */