1 /*-------------------------------------------------------------------------
4 * this file contains general postgres administration and initialization
5 * stuff that used to be spread out between the following files:
6 * globals.h global variables
7 * pdir.h directory path crud
8 * pinit.h postgres initialization
9 * pmod.h processing modes
12 * Portions Copyright (c) 1996-2001, PostgreSQL Global Development Group
13 * Portions Copyright (c) 1994, Regents of the University of California
15 * $Id: miscadmin.h,v 1.105 2002/06/11 13:40:52 wieck Exp $
18 * some of the information in this file should be moved to
21 *-------------------------------------------------------------------------
26 #include <sys/types.h>
29 /*****************************************************************************
30 * System interrupt and critical section handling
32 * There are two types of interrupts that a running backend needs to accept
33 * without messing up its state: QueryCancel (SIGINT) and ProcDie (SIGTERM).
34 * In both cases, we need to be able to clean up the current transaction
35 * gracefully, so we can't respond to the interrupt instantaneously ---
36 * there's no guarantee that internal data structures would be self-consistent
37 * if the code is interrupted at an arbitrary instant. Instead, the signal
38 * handlers set flags that are checked periodically during execution.
40 * The CHECK_FOR_INTERRUPTS() macro is called at strategically located spots
41 * where it is normally safe to accept a cancel or die interrupt. In some
42 * cases, we invoke CHECK_FOR_INTERRUPTS() inside low-level subroutines that
43 * might sometimes be called in contexts that do *not* want to allow a cancel
44 * or die interrupt. The HOLD_INTERRUPTS() and RESUME_INTERRUPTS() macros
45 * allow code to ensure that no cancel or die interrupt will be accepted,
46 * even if CHECK_FOR_INTERRUPTS() gets called in a subroutine. The interrupt
47 * will be held off until CHECK_FOR_INTERRUPTS() is done outside any
48 * HOLD_INTERRUPTS() ... RESUME_INTERRUPTS() section.
50 * Special mechanisms are used to let an interrupt be accepted when we are
51 * waiting for a lock or when we are waiting for command input (but, of
52 * course, only if the interrupt holdoff counter is zero). See the
53 * related code for details.
55 * A related, but conceptually distinct, mechanism is the "critical section"
56 * mechanism. A critical section not only holds off cancel/die interrupts,
57 * but causes any elog(ERROR) or elog(FATAL) to become elog(STOP) --- that is,
58 * a system-wide reset is forced. Needless to say, only really *critical*
59 * code should be marked as a critical section! Currently, this mechanism
60 * is only used for XLOG-related code.
62 *****************************************************************************/
65 /* these are marked volatile because they are set by signal handlers: */
66 extern volatile bool InterruptPending;
67 extern volatile bool QueryCancelPending;
68 extern volatile bool ProcDiePending;
70 /* these are marked volatile because they are examined by signal handlers: */
71 extern volatile bool ImmediateInterruptOK;
72 extern volatile uint32 InterruptHoldoffCount;
73 extern volatile uint32 CritSectionCount;
76 extern void ProcessInterrupts(void);
78 #define CHECK_FOR_INTERRUPTS() \
80 if (InterruptPending) \
81 ProcessInterrupts(); \
84 #define HOLD_INTERRUPTS() (InterruptHoldoffCount++)
86 #define RESUME_INTERRUPTS() \
88 Assert(InterruptHoldoffCount > 0); \
89 InterruptHoldoffCount--; \
92 #define START_CRIT_SECTION() (CritSectionCount++)
94 #define END_CRIT_SECTION() \
96 Assert(CritSectionCount > 0); \
101 /*****************************************************************************
103 *****************************************************************************/
106 * from postmaster/postmaster.c
108 extern bool IsUnderPostmaster;
109 extern bool ClientAuthInProgress;
111 extern int PostmasterMain(int argc, char *argv[]);
112 extern void ClosePostmasterPorts(bool pgstat_too);
115 * from utils/init/globals.c
117 extern bool Noversion;
118 extern char *DataDir;
120 extern DLLIMPORT int MyProcPid;
121 extern struct Port *MyProcPort;
122 extern long MyCancelKey;
124 extern char OutputFileName[];
125 extern char pg_pathname[];
128 * done in storage/backendid.h for now.
130 * extern BackendId MyBackendId;
132 extern DLLIMPORT Oid MyDatabaseId;
134 /* Date/Time Configuration
136 * Constants to pass info from runtime environment:
137 * USE_POSTGRES_DATES specifies traditional postgres format for output.
138 * USE_ISO_DATES specifies ISO-compliant format for output.
139 * USE_SQL_DATES specified Oracle/Ingres-compliant format for output.
140 * USE_GERMAN_DATES specifies German-style dd.mm/yyyy date format.
142 * DateStyle specifies preference for date formatting for output.
143 * EuroDates if client prefers dates interpreted and written w/European conventions.
145 * HasCTZSet if client timezone is specified by client.
146 * CDayLight is the apparent daylight savings time status.
147 * CTimeZone is the timezone offset in seconds.
148 * CTZName is the timezone label.
151 #define MAXTZLEN 10 /* max TZ name len, not counting tr. null */
153 #define USE_POSTGRES_DATES 0
154 #define USE_ISO_DATES 1
155 #define USE_SQL_DATES 2
156 #define USE_GERMAN_DATES 3
158 extern int DateStyle;
159 extern bool EuroDates;
160 extern bool HasCTZSet;
161 extern bool CDayLight;
162 extern int CTimeZone;
163 extern char CTZName[];
165 extern char FloatFormat[];
166 extern char DateFormat[];
168 extern bool enableFsync;
169 extern bool allowSystemTableMods;
171 extern int VacuumMem;
174 * A few postmaster startup options are exported here so the
175 * configuration file processor can access them.
178 extern bool NetServer;
179 extern bool EnableSSL;
180 extern bool SilentMode;
181 extern int MaxBackends;
183 extern int PostPortNumber;
184 extern int Unix_socket_permissions;
185 extern char *Unix_socket_group;
186 extern char *UnixSocketDir;
187 extern char *VirtualHost;
190 /*****************************************************************************
192 * POSTGRES directory path definitions. *
193 *****************************************************************************/
195 extern char *DatabaseName;
196 extern char *DatabasePath;
198 /* in utils/misc/database.c */
199 extern void GetRawDatabaseInfo(const char *name, Oid *db_id, char *path);
200 extern char *ExpandDatabasePath(const char *path);
202 /* now in utils/init/miscinit.c */
203 extern void SetDatabaseName(const char *name);
204 extern void SetDatabasePath(const char *path);
206 extern char *GetUserNameFromId(Oid userid);
208 extern Oid GetUserId(void);
209 extern void SetUserId(Oid userid);
210 extern Oid GetSessionUserId(void);
211 extern void SetSessionUserId(Oid userid);
212 extern void InitializeSessionUserId(const char *username);
213 extern void InitializeSessionUserIdStandalone(void);
214 extern void SetSessionAuthorization(Oid userid);
216 extern void SetDataDir(const char *dir);
218 extern int FindExec(char *full_path, const char *argv0,
219 const char *binary_name);
220 extern int CheckPathAccess(char *path, char *name, int open_mode);
223 extern void SetCharSet(void);
224 extern char *convertstr(unsigned char *buff, int len, int dest);
227 /* in utils/misc/superuser.c */
228 extern bool superuser(void); /* current user is superuser */
229 extern bool superuser_arg(Oid userid); /* given user is superuser */
230 extern bool is_dbadmin(Oid dbid); /* current user is owner of
234 /*****************************************************************************
236 * POSTGRES processing mode definitions. *
237 *****************************************************************************/
241 * There are three processing modes in POSTGRES. They are
242 * BootstrapProcessing or "bootstrap," InitProcessing or
243 * "initialization," and NormalProcessing or "normal."
245 * The first two processing modes are used during special times. When the
246 * system state indicates bootstrap processing, transactions are all given
247 * transaction id "one" and are consequently guaranteed to commit. This mode
248 * is used during the initial generation of template databases.
250 * Initialization mode: used while starting a backend, until all normal
251 * initialization is complete. Some code behaves differently when executed
252 * in this mode to enable system bootstrapping.
254 * If a POSTGRES binary is in normal mode, then all code may be executed
258 typedef enum ProcessingMode
260 BootstrapProcessing, /* bootstrap creation of template database */
261 InitProcessing, /* initializing system */
262 NormalProcessing /* normal processing */
265 extern ProcessingMode Mode;
267 #define IsBootstrapProcessingMode() ((bool)(Mode == BootstrapProcessing))
268 #define IsInitProcessingMode() ((bool)(Mode == InitProcessing))
269 #define IsNormalProcessingMode() ((bool)(Mode == NormalProcessing))
271 #define SetProcessingMode(mode) \
273 AssertArg((mode) == BootstrapProcessing || \
274 (mode) == InitProcessing || \
275 (mode) == NormalProcessing); \
279 #define GetProcessingMode() Mode
282 /*****************************************************************************
284 * POSTGRES initialization and cleanup definitions. *
285 *****************************************************************************/
287 /* in utils/init/postinit.c */
288 extern void InitPostgres(const char *dbname, const char *username);
289 extern void BaseInit(void);
291 /* in utils/init/miscinit.c */
292 extern bool CreateDataDirLockFile(const char *datadir, bool amPostmaster);
293 extern bool CreateSocketLockFile(const char *socketfile, bool amPostmaster);
294 extern void TouchSocketLockFile(void);
295 extern void RecordSharedMemoryInLockFile(unsigned long id1,
298 extern void ValidatePgVersion(const char *path);
300 /* these externs do not belong here... */
301 extern void IgnoreSystemIndexes(bool mode);
302 extern bool IsIgnoringSystemIndexes(void);
303 extern bool IsCacheInitialized(void);
305 #endif /* MISCADMIN_H */