1 # -----------------------------
2 # PostgreSQL configuration file
3 # -----------------------------
5 # This file consists of lines of the form:
9 # (The '=' is optional.) White space may be used. Comments are introduced
10 # with '#' anywhere on a line. The complete list of option names and
11 # allowed values can be found in the PostgreSQL documentation. The
12 # commented-out settings shown in this file represent the default values.
14 # Please note that re-commenting a setting is NOT sufficient to revert it
15 # to the default value, unless you restart the server.
17 # Any option can also be given as a command line switch to the server,
18 # e.g., 'postgres -c log_connections=on'. Some options can be changed at
19 # run-time with the 'SET' SQL command.
21 # This file is read on server startup and when the server receives a
22 # SIGHUP. If you edit the file on a running system, you have to SIGHUP the
23 # server for the changes to take effect, or use "pg_ctl reload". Some
24 # settings, which are marked below, require a server shutdown and restart
27 # Memory units: kB = kilobytes MB = megabytes GB = gigabytes
28 # Time units: ms = milliseconds s = seconds min = minutes h = hours d = days
31 #---------------------------------------------------------------------------
33 #---------------------------------------------------------------------------
35 # The default values of these variables are driven from the -D command line
36 # switch or PGDATA environment variable, represented here as ConfigDir.
38 #data_directory = 'ConfigDir' # use data in another directory
39 # (change requires restart)
40 #hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
41 # (change requires restart)
42 #ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
43 # (change requires restart)
45 # If external_pid_file is not explicitly set, no extra PID file is written.
46 #external_pid_file = '(none)' # write an extra PID file
47 # (change requires restart)
50 #---------------------------------------------------------------------------
51 # CONNECTIONS AND AUTHENTICATION
52 #---------------------------------------------------------------------------
54 # - Connection Settings -
56 #listen_addresses = 'localhost' # what IP address(es) to listen on;
57 # comma-separated list of addresses;
58 # defaults to 'localhost', '*' = all
59 # (change requires restart)
60 #port = 5432 # (change requires restart)
61 #max_connections = 100 # (change requires restart)
62 # Note: increasing max_connections costs ~400 bytes of shared memory per
63 # connection slot, plus lock space (see max_locks_per_transaction). You
64 # might also need to raise shared_buffers to support more connections.
65 #superuser_reserved_connections = 3 # (change requires restart)
66 #unix_socket_directory = '' # (change requires restart)
67 #unix_socket_group = '' # (change requires restart)
68 #unix_socket_permissions = 0777 # octal
69 # (change requires restart)
70 #bonjour_name = '' # defaults to the computer name
71 # (change requires restart)
73 # - Security & Authentication -
75 #authentication_timeout = 1min # 1s-600s
76 #ssl = off # (change requires restart)
77 #ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH' # Allowed SSL ciphers
78 # (change requires restart)
79 #password_encryption = on
80 #db_user_namespace = off
83 #krb_server_keyfile = '' # (change requires restart)
84 #krb_srvname = 'postgres' # (change requires restart, kerberos only)
85 #krb_server_hostname = '' # empty string matches any keytab entry
86 # (change requires restart, kerberos only)
87 #krb_caseins_users = off # (change requires restart)
90 # see 'man 7 tcp' for details
92 #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
93 # 0 selects the system default
94 #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
95 # 0 selects the system default
96 #tcp_keepalives_count = 0 # TCP_KEEPCNT;
97 # 0 selects the system default
100 #---------------------------------------------------------------------------
101 # RESOURCE USAGE (except WAL)
102 #---------------------------------------------------------------------------
106 #shared_buffers = 32MB # min 128kB or max_connections*16kB
107 # (change requires restart)
108 #temp_buffers = 8MB # min 800kB
109 #max_prepared_transactions = 5 # can be 0 or more
110 # (change requires restart)
111 # Note: increasing max_prepared_transactions costs ~600 bytes of shared memory
112 # per transaction slot, plus lock space (see max_locks_per_transaction).
113 #work_mem = 1MB # min 64kB
114 #maintenance_work_mem = 16MB # min 1MB
115 #max_stack_depth = 2MB # min 100kB
119 #max_fsm_pages = 204800 # min max_fsm_relations*16, 6 bytes each
120 # (change requires restart)
121 #max_fsm_relations = 1000 # min 100, ~70 bytes each
122 # (change requires restart)
124 # - Kernel Resource Usage -
126 #max_files_per_process = 1000 # min 25
127 # (change requires restart)
128 #shared_preload_libraries = '' # (change requires restart)
130 # - Cost-Based Vacuum Delay -
132 #vacuum_cost_delay = 0 # 0-1000 milliseconds
133 #vacuum_cost_page_hit = 1 # 0-10000 credits
134 #vacuum_cost_page_miss = 10 # 0-10000 credits
135 #vacuum_cost_page_dirty = 20 # 0-10000 credits
136 #vacuum_cost_limit = 200 # 0-10000 credits
138 # - Background writer -
140 #bgwriter_delay = 200ms # 10-10000ms between rounds
141 #bgwriter_lru_percent = 1.0 # 0-100% of LRU buffers scanned/round
142 #bgwriter_lru_maxpages = 5 # 0-1000 buffers max written/round
145 #---------------------------------------------------------------------------
147 #---------------------------------------------------------------------------
151 #fsync = on # turns forced synchronization on or off
152 #synchronous_commit = on # immediate fsync at commit
153 #wal_sync_method = fsync # the default is the first option
154 # supported by the operating system:
160 #full_page_writes = on # recover from partial page writes
161 #wal_buffers = 64kB # min 32kB
162 # (change requires restart)
163 #wal_writer_delay = 200ms # range 1-10000, in milliseconds
165 #commit_delay = 0 # range 0-100000, in microseconds
166 #commit_siblings = 5 # range 1-1000
170 #checkpoint_segments = 3 # in logfile segments, min 1, 16MB each
171 #checkpoint_timeout = 5min # range 30s-1h
172 #checkpoint_completion_target = 0.5 # checkpoint target duration, 0.0 - 1.0
173 #checkpoint_warning = 30s # 0 is off
177 #archive_command = '' # command to use to archive a logfile segment
178 #archive_timeout = 0 # force a logfile segment switch after this
179 # many seconds; 0 is off
182 #---------------------------------------------------------------------------
184 #---------------------------------------------------------------------------
186 # - Planner Method Configuration -
188 #enable_bitmapscan = on
190 #enable_hashjoin = on
191 #enable_indexscan = on
192 #enable_mergejoin = on
193 #enable_nestloop = on
198 # - Planner Cost Constants -
200 #seq_page_cost = 1.0 # measured on an arbitrary scale
201 #random_page_cost = 4.0 # same scale as above
202 #cpu_tuple_cost = 0.01 # same scale as above
203 #cpu_index_tuple_cost = 0.005 # same scale as above
204 #cpu_operator_cost = 0.0025 # same scale as above
205 #effective_cache_size = 128MB
207 # - Genetic Query Optimizer -
211 #geqo_effort = 5 # range 1-10
212 #geqo_pool_size = 0 # selects default based on effort
213 #geqo_generations = 0 # selects default based on effort
214 #geqo_selection_bias = 2.0 # range 1.5-2.0
216 # - Other Planner Options -
218 #default_statistics_target = 10 # range 1-1000
219 #constraint_exclusion = off
220 #from_collapse_limit = 8
221 #join_collapse_limit = 8 # 1 disables collapsing of explicit
225 #---------------------------------------------------------------------------
226 # ERROR REPORTING AND LOGGING
227 #---------------------------------------------------------------------------
231 #log_destination = 'stderr' # Valid values are combinations of
232 # stderr, csvlog, syslog and eventlog,
233 # depending on platform.
234 # csvlog requires logging_collector to be on
236 # This is used when logging to stderr:
237 #logging_collector = off # Enable capturing of stderr and csvlog
238 # into log files. Required to be on for csvlogs.
239 # (change requires restart)
241 # These are only used if logging_collector is on:
242 #log_directory = 'pg_log' # Directory where log files are written
243 # Can be absolute or relative to PGDATA
244 #log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # Log file name pattern.
245 # Can include strftime() escapes
246 #log_truncate_on_rotation = off # If on, any existing log file of the same
247 # name as the new log file will be
248 # truncated rather than appended to. But
249 # such truncation only occurs on
250 # time-driven rotation, not on restarts
251 # or size-driven rotation. Default is
252 # off, meaning append to existing files
254 #log_rotation_age = 1d # Automatic rotation of logfiles will
255 # happen after that time. 0 to
257 #log_rotation_size = 10MB # Automatic rotation of logfiles will
258 # happen after that much log
259 # output. 0 to disable.
261 # These are relevant when logging to syslog:
262 #syslog_facility = 'LOCAL0'
263 #syslog_ident = 'postgres'
268 #client_min_messages = notice # Values in order of decreasing detail:
279 #log_min_messages = notice # Values in order of decreasing detail:
293 #log_error_verbosity = default # terse, default, or verbose messages
295 #log_min_error_statement = error # Values in order of decreasing detail:
307 # panic (effectively off)
309 #log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
310 # and their durations, > 0 logs only
311 # statements running at least N msec.
314 #silent_mode = off # DO NOT USE without syslog or
316 # (change requires restart)
320 #debug_print_parse = off
321 #debug_print_rewritten = off
322 #debug_print_plan = off
323 #debug_pretty_print = off
324 #log_checkpoints = off
325 #log_connections = off
326 #log_disconnections = off
329 #log_line_prefix = '' # Special values:
332 # %r = remote host and port
335 # %t = timestamp (no milliseconds)
336 # %m = timestamp with milliseconds
339 # %l = session line number
340 # %s = session start timestamp
341 # %v = virtual transaction id
342 # %x = transaction id (0 if none)
343 # %q = stop here in non-session
347 #log_lock_waits = off # Log lock waits >= deadlock_timeout
348 #log_statement = 'none' # none, ddl, mod, all
349 #log_temp_files = -1 # Log temporary files equal or larger
350 # than specified number of kilobytes.
351 # -1 disables; 0 logs all temp files
352 #log_timezone = unknown # actually, defaults to TZ
353 # environment setting
355 #---------------------------------------------------------------------------
357 #---------------------------------------------------------------------------
359 # - Query/Index Statistics Collector -
361 #stats_command_string = on
362 #update_process_title = on
364 #stats_start_collector = on # needed for block or row stats
365 # (change requires restart)
366 #stats_block_level = off
367 #stats_row_level = on
368 #stats_reset_on_server_start = off # (change requires restart)
371 # - Statistics Monitoring -
373 #log_parser_stats = off
374 #log_planner_stats = off
375 #log_executor_stats = off
376 #log_statement_stats = off
379 #---------------------------------------------------------------------------
380 # AUTOVACUUM PARAMETERS
381 #---------------------------------------------------------------------------
383 #autovacuum = on # enable autovacuum subprocess?
384 # 'on' requires stats_start_collector
385 # and stats_row_level to also be on
386 #autovacuum_max_workers = 3 # max # of autovacuum subprocesses
387 #autovacuum_naptime = 1min # time between autovacuum runs
388 #log_autovacuum = -1 # -1 is disabled, 0 logs all actions
389 # and their durations, > 0 logs only
390 # actions running at least N msec.
391 #autovacuum_vacuum_threshold = 50 # min # of tuple updates before
393 #autovacuum_analyze_threshold = 50 # min # of tuple updates before
395 #autovacuum_vacuum_scale_factor = 0.2 # fraction of rel size before
397 #autovacuum_analyze_scale_factor = 0.1 # fraction of rel size before
399 #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
400 # (change requires restart)
401 #autovacuum_vacuum_cost_delay = 20 # default vacuum cost delay for
402 # autovacuum, -1 means use
404 #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
405 # autovacuum, -1 means use
409 #---------------------------------------------------------------------------
410 # CLIENT CONNECTION DEFAULTS
411 #---------------------------------------------------------------------------
413 # - Statement Behavior -
415 #search_path = '"$user",public' # schema names
416 #default_tablespace = '' # a tablespace name, '' uses
418 #temp_tablespaces = '' # a list of tablespace names,
419 # '' uses only default tablespace
420 #check_function_bodies = on
421 #default_transaction_isolation = 'read committed'
422 #default_transaction_read_only = off
423 #statement_timeout = 0 # 0 is disabled
424 #session_replication_role = "origin"
425 #vacuum_freeze_min_age = 100000000
426 #xmlbinary = 'base64'
427 #xmloption = 'content'
429 # - Locale and Formatting -
431 #datestyle = 'iso, mdy'
432 #timezone = unknown # actually, defaults to TZ
433 # environment setting
434 #timezone_abbreviations = 'Default' # select the set of available timezone
435 # abbreviations. Currently, there are
439 # However you can also create your own
440 # file in share/timezonesets/.
441 #extra_float_digits = 0 # min -15, max 2
442 #client_encoding = sql_ascii # actually, defaults to database
445 # These settings are initialized by initdb -- they might be changed
446 #lc_messages = 'C' # locale for system error message
448 #lc_monetary = 'C' # locale for monetary formatting
449 #lc_numeric = 'C' # locale for number formatting
450 #lc_time = 'C' # locale for time formatting
452 # default configuration for text search
453 #default_text_search_config = 'pg_catalog.simple'
457 #explain_pretty_print = on
458 #dynamic_library_path = '$libdir'
459 #local_preload_libraries = ''
462 #---------------------------------------------------------------------------
464 #---------------------------------------------------------------------------
466 #deadlock_timeout = 1s
467 #max_locks_per_transaction = 64 # min 10
468 # (change requires restart)
469 # Note: each lock table slot uses ~270 bytes of shared memory, and there are
470 # max_locks_per_transaction * (max_connections + max_prepared_transactions)
474 #---------------------------------------------------------------------------
475 # VERSION/PLATFORM COMPATIBILITY
476 #---------------------------------------------------------------------------
478 # - Previous Postgres Versions -
480 #add_missing_from = off
482 #backslash_quote = safe_encoding # on, off, or safe_encoding
483 #default_with_oids = off
484 #escape_string_warning = on
485 #standard_conforming_strings = off
486 #regex_flavor = advanced # advanced, extended, or basic
487 #sql_inheritance = on
489 # - Other Platforms & Clients -
491 #transform_null_equals = off
494 #---------------------------------------------------------------------------
496 #---------------------------------------------------------------------------
498 #custom_variable_classes = '' # list of custom variable class names