1 # -----------------------------
2 # PostgreSQL configuration file
3 # -----------------------------
5 # This file consists of lines of the form:
9 # (The '=' is optional.) White space may be used. Comments are introduced
10 # with '#' anywhere on a line. The complete list of option names and
11 # allowed values can be found in the PostgreSQL documentation. The
12 # commented-out settings shown in this file represent the default values.
14 # Please note that re-commenting a setting is NOT sufficient to revert it
15 # to the default value, unless you restart the server.
17 # Any option can also be given as a command line switch to the server,
18 # e.g., 'postgres -c log_connections=on'. Some options can be changed at
19 # run-time with the 'SET' SQL command.
21 # This file is read on server startup and when the server receives a
22 # SIGHUP. If you edit the file on a running system, you have to SIGHUP the
23 # server for the changes to take effect, or use "pg_ctl reload". Some
24 # settings, which are marked below, require a server shutdown and restart
27 # Memory units: kB = kilobytes MB = megabytes GB = gigabytes
28 # Time units: ms = milliseconds s = seconds min = minutes h = hours d = days
31 #---------------------------------------------------------------------------
33 #---------------------------------------------------------------------------
35 # The default values of these variables are driven from the -D command line
36 # switch or PGDATA environment variable, represented here as ConfigDir.
38 #data_directory = 'ConfigDir' # use data in another directory
39 # (change requires restart)
40 #hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file
41 # (change requires restart)
42 #ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file
43 # (change requires restart)
45 # If external_pid_file is not explicitly set, no extra PID file is written.
46 #external_pid_file = '(none)' # write an extra PID file
47 # (change requires restart)
50 #---------------------------------------------------------------------------
51 # CONNECTIONS AND AUTHENTICATION
52 #---------------------------------------------------------------------------
54 # - Connection Settings -
56 #listen_addresses = 'localhost' # what IP address(es) to listen on;
57 # comma-separated list of addresses;
58 # defaults to 'localhost', '*' = all
59 # (change requires restart)
60 #port = 5432 # (change requires restart)
61 #max_connections = 100 # (change requires restart)
62 # Note: increasing max_connections costs ~400 bytes of shared memory per
63 # connection slot, plus lock space (see max_locks_per_transaction). You
64 # might also need to raise shared_buffers to support more connections.
65 #superuser_reserved_connections = 3 # (change requires restart)
66 #unix_socket_directory = '' # (change requires restart)
67 #unix_socket_group = '' # (change requires restart)
68 #unix_socket_permissions = 0777 # octal
69 # (change requires restart)
70 #bonjour_name = '' # defaults to the computer name
71 # (change requires restart)
73 # - Security & Authentication -
75 #authentication_timeout = 1min # 1s-600s
76 #ssl = off # (change requires restart)
77 #ssl_ciphers = 'ALL:!ADH:!LOW:!EXP:!MD5:@STRENGTH' # Allowed SSL ciphers
78 # (change requires restart)
79 #password_encryption = on
80 #db_user_namespace = off
83 #krb_server_keyfile = '' # (change requires restart)
84 #krb_srvname = 'postgres' # (change requires restart)
85 #krb_server_hostname = '' # empty string matches any keytab entry
86 # (change requires restart)
87 #krb_caseins_users = off # (change requires restart)
90 # see 'man 7 tcp' for details
92 #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds;
93 # 0 selects the system default
94 #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds;
95 # 0 selects the system default
96 #tcp_keepalives_count = 0 # TCP_KEEPCNT;
97 # 0 selects the system default
100 #---------------------------------------------------------------------------
101 # RESOURCE USAGE (except WAL)
102 #---------------------------------------------------------------------------
106 #shared_buffers = 32MB # min 128kB or max_connections*16kB
107 # (change requires restart)
108 #temp_buffers = 8MB # min 800kB
109 #max_prepared_transactions = 5 # can be 0 or more
110 # (change requires restart)
111 # Note: increasing max_prepared_transactions costs ~600 bytes of shared memory
112 # per transaction slot, plus lock space (see max_locks_per_transaction).
113 #work_mem = 1MB # min 64kB
114 #maintenance_work_mem = 16MB # min 1MB
115 #max_stack_depth = 2MB # min 100kB
119 #max_fsm_pages = 204800 # min max_fsm_relations*16, 6 bytes each
120 # (change requires restart)
121 #max_fsm_relations = 1000 # min 100, ~70 bytes each
122 # (change requires restart)
124 # - Kernel Resource Usage -
126 #max_files_per_process = 1000 # min 25
127 # (change requires restart)
128 #shared_preload_libraries = '' # (change requires restart)
130 # - Cost-Based Vacuum Delay -
132 #vacuum_cost_delay = 0 # 0-1000 milliseconds
133 #vacuum_cost_page_hit = 1 # 0-10000 credits
134 #vacuum_cost_page_miss = 10 # 0-10000 credits
135 #vacuum_cost_page_dirty = 20 # 0-10000 credits
136 #vacuum_cost_limit = 200 # 0-10000 credits
138 # - Background writer -
140 #bgwriter_delay = 200ms # 10-10000ms between rounds
141 #bgwriter_lru_percent = 1.0 # 0-100% of LRU buffers scanned/round
142 #bgwriter_lru_maxpages = 5 # 0-1000 buffers max written/round
143 #bgwriter_all_percent = 0.333 # 0-100% of all buffers scanned/round
144 #bgwriter_all_maxpages = 5 # 0-1000 buffers max written/round
147 #---------------------------------------------------------------------------
149 #---------------------------------------------------------------------------
153 #fsync = on # turns forced synchronization on or off
154 #wal_sync_method = fsync # the default is the first option
155 # supported by the operating system:
161 #full_page_writes = on # recover from partial page writes
162 #wal_buffers = 64kB # min 32kB
163 # (change requires restart)
164 #commit_delay = 0 # range 0-100000, in microseconds
165 #commit_siblings = 5 # range 1-1000
169 #checkpoint_segments = 3 # in logfile segments, min 1, 16MB each
170 #checkpoint_timeout = 5min # range 30s-1h
171 #checkpoint_warning = 30s # 0 is off
175 #archive_command = '' # command to use to archive a logfile segment
176 #archive_timeout = 0 # force a logfile segment switch after this
177 # many seconds; 0 is off
180 #---------------------------------------------------------------------------
182 #---------------------------------------------------------------------------
184 # - Planner Method Configuration -
186 #enable_bitmapscan = on
188 #enable_hashjoin = on
189 #enable_indexscan = on
190 #enable_mergejoin = on
191 #enable_nestloop = on
196 # - Planner Cost Constants -
198 #seq_page_cost = 1.0 # measured on an arbitrary scale
199 #random_page_cost = 4.0 # same scale as above
200 #cpu_tuple_cost = 0.01 # same scale as above
201 #cpu_index_tuple_cost = 0.005 # same scale as above
202 #cpu_operator_cost = 0.0025 # same scale as above
203 #effective_cache_size = 128MB
205 # - Genetic Query Optimizer -
209 #geqo_effort = 5 # range 1-10
210 #geqo_pool_size = 0 # selects default based on effort
211 #geqo_generations = 0 # selects default based on effort
212 #geqo_selection_bias = 2.0 # range 1.5-2.0
214 # - Other Planner Options -
216 #default_statistics_target = 10 # range 1-1000
217 #constraint_exclusion = off
218 #from_collapse_limit = 8
219 #join_collapse_limit = 8 # 1 disables collapsing of explicit
223 #---------------------------------------------------------------------------
224 # ERROR REPORTING AND LOGGING
225 #---------------------------------------------------------------------------
229 #log_destination = 'stderr' # Valid values are combinations of
230 # stderr, syslog and eventlog,
231 # depending on platform.
233 # This is used when logging to stderr:
234 #redirect_stderr = off # Enable capturing of stderr into log
236 # (change requires restart)
238 # These are only used if redirect_stderr is on:
239 #log_directory = 'pg_log' # Directory where log files are written
240 # Can be absolute or relative to PGDATA
241 #log_filename = 'postgresql-%Y-%m-%d_%H%M%S.log' # Log file name pattern.
242 # Can include strftime() escapes
243 #log_truncate_on_rotation = off # If on, any existing log file of the same
244 # name as the new log file will be
245 # truncated rather than appended to. But
246 # such truncation only occurs on
247 # time-driven rotation, not on restarts
248 # or size-driven rotation. Default is
249 # off, meaning append to existing files
251 #log_rotation_age = 1d # Automatic rotation of logfiles will
252 # happen after that time. 0 to
254 #log_rotation_size = 10MB # Automatic rotation of logfiles will
255 # happen after that much log
256 # output. 0 to disable.
258 # These are relevant when logging to syslog:
259 #syslog_facility = 'LOCAL0'
260 #syslog_ident = 'postgres'
265 #client_min_messages = notice # Values in order of decreasing detail:
276 #log_min_messages = notice # Values in order of decreasing detail:
290 #log_error_verbosity = default # terse, default, or verbose messages
292 #log_min_error_statement = error # Values in order of decreasing detail:
304 # panic (effectively off)
306 #log_min_duration_statement = -1 # -1 is disabled, 0 logs all statements
307 # and their durations, > 0 logs only
308 # statements running at least N msec.
311 #silent_mode = off # DO NOT USE without syslog or
313 # (change requires restart)
317 #debug_print_parse = off
318 #debug_print_rewritten = off
319 #debug_print_plan = off
320 #debug_pretty_print = off
321 #log_connections = off
322 #log_disconnections = off
324 #log_line_prefix = '' # Special values:
327 # %r = remote host and port
330 # %t = timestamp (no milliseconds)
331 # %m = timestamp with milliseconds
334 # %l = session line number
335 # %s = session start timestamp
336 # %x = transaction id
337 # %q = stop here in non-session
341 #log_statement = 'none' # none, ddl, mod, all
343 #log_lock_waits = off # Log lock waits longer than deadlock_timeout
344 #log_temp_files = -1 # Log temporary files equal or larger
345 # than the specified number of kilobytes.
346 # -1 disables; 0 logs all temp files
348 #---------------------------------------------------------------------------
350 #---------------------------------------------------------------------------
352 # - Query/Index Statistics Collector -
354 #stats_command_string = on
355 #update_process_title = on
357 #stats_start_collector = on # needed for block or row stats
358 # (change requires restart)
359 #stats_block_level = off
360 #stats_row_level = on
361 #stats_reset_on_server_start = off # (change requires restart)
364 # - Statistics Monitoring -
366 #log_parser_stats = off
367 #log_planner_stats = off
368 #log_executor_stats = off
369 #log_statement_stats = off
372 #---------------------------------------------------------------------------
373 # AUTOVACUUM PARAMETERS
374 #---------------------------------------------------------------------------
376 #autovacuum = on # enable autovacuum subprocess?
377 # 'on' requires stats_start_collector
378 # and stats_row_level to also be on
379 #autovacuum_naptime = 1min # time between autovacuum runs
380 #autovacuum_vacuum_threshold = 500 # min # of tuple updates before
382 #autovacuum_analyze_threshold = 250 # min # of tuple updates before
384 #autovacuum_vacuum_scale_factor = 0.2 # fraction of rel size before
386 #autovacuum_analyze_scale_factor = 0.1 # fraction of rel size before
388 #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum
389 # (change requires restart)
390 #autovacuum_vacuum_cost_delay = -1 # default vacuum cost delay for
391 # autovacuum, -1 means use
393 #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for
394 # autovacuum, -1 means use
398 #---------------------------------------------------------------------------
399 # CLIENT CONNECTION DEFAULTS
400 #---------------------------------------------------------------------------
402 # - Statement Behavior -
404 #search_path = '"$user",public' # schema names
405 #default_tablespace = '' # a tablespace name, '' uses
407 #check_function_bodies = on
408 #default_transaction_isolation = 'read committed'
409 #default_transaction_read_only = off
410 #statement_timeout = 0 # 0 is disabled
411 #session_replication_role = "origin"
412 #vacuum_freeze_min_age = 100000000
413 #xmlbinary = 'base64'
414 #xmloption = 'content'
416 # - Locale and Formatting -
418 #datestyle = 'iso, mdy'
419 #timezone = unknown # actually, defaults to TZ
420 # environment setting
421 #timezone_abbreviations = 'Default' # select the set of available timezone
422 # abbreviations. Currently, there are
426 # However you can also create your own
427 # file in share/timezonesets/.
428 #extra_float_digits = 0 # min -15, max 2
429 #client_encoding = sql_ascii # actually, defaults to database
432 # These settings are initialized by initdb -- they might be changed
433 #lc_messages = 'C' # locale for system error message
435 #lc_monetary = 'C' # locale for monetary formatting
436 #lc_numeric = 'C' # locale for number formatting
437 #lc_time = 'C' # locale for time formatting
441 #explain_pretty_print = on
442 #dynamic_library_path = '$libdir'
443 #local_preload_libraries = ''
446 #---------------------------------------------------------------------------
448 #---------------------------------------------------------------------------
450 #deadlock_timeout = 1s
451 #max_locks_per_transaction = 64 # min 10
452 # (change requires restart)
453 # Note: each lock table slot uses ~270 bytes of shared memory, and there are
454 # max_locks_per_transaction * (max_connections + max_prepared_transactions)
458 #---------------------------------------------------------------------------
459 # VERSION/PLATFORM COMPATIBILITY
460 #---------------------------------------------------------------------------
462 # - Previous Postgres Versions -
464 #add_missing_from = off
466 #backslash_quote = safe_encoding # on, off, or safe_encoding
467 #default_with_oids = off
468 #escape_string_warning = on
469 #standard_conforming_strings = off
470 #regex_flavor = advanced # advanced, extended, or basic
471 #sql_inheritance = on
473 # - Other Platforms & Clients -
475 #transform_null_equals = off
478 #---------------------------------------------------------------------------
480 #---------------------------------------------------------------------------
482 #custom_variable_classes = '' # list of custom variable class names