1 /*-------------------------------------------------------------------------
4 * Catalog-to-filenode mapping
6 * For most tables, the physical file underlying the table is specified by
7 * pg_class.relfilenode. However, that obviously won't work for pg_class
8 * itself, nor for the other "nailed" catalogs for which we have to be able
9 * to set up working Relation entries without access to pg_class. It also
10 * does not work for shared catalogs, since there is no practical way to
11 * update other databases' pg_class entries when relocating a shared catalog.
12 * Therefore, for these special catalogs (henceforth referred to as "mapped
13 * catalogs") we rely on a separately maintained file that shows the mapping
14 * from catalog OIDs to filenode numbers. Each database has a map file for
15 * its local mapped catalogs, and there is a separate map file for shared
16 * catalogs. Mapped catalogs have zero in their pg_class.relfilenode entries.
18 * Relocation of a normal table is committed (ie, the new physical file becomes
19 * authoritative) when the pg_class row update commits. For mapped catalogs,
20 * the act of updating the map file is effectively commit of the relocation.
21 * We postpone the file update till just before commit of the transaction
22 * doing the rewrite, but there is necessarily a window between. Therefore
23 * mapped catalogs can only be relocated by operations such as VACUUM FULL
24 * and CLUSTER, which make no transactionally-significant changes: it must be
25 * safe for the new file to replace the old, even if the transaction itself
26 * aborts. An important factor here is that the indexes and toast table of
27 * a mapped catalog must also be mapped, so that the rewrites/relocations of
28 * all these files commit in a single map file update rather than being tied
29 * to transaction commit.
31 * Portions Copyright (c) 1996-2018, PostgreSQL Global Development Group
32 * Portions Copyright (c) 1994, Regents of the University of California
36 * src/backend/utils/cache/relmapper.c
38 *-------------------------------------------------------------------------
46 #include "access/xact.h"
47 #include "access/xlog.h"
48 #include "access/xloginsert.h"
49 #include "catalog/catalog.h"
50 #include "catalog/pg_tablespace.h"
51 #include "catalog/storage.h"
52 #include "miscadmin.h"
54 #include "storage/fd.h"
55 #include "storage/lwlock.h"
56 #include "utils/inval.h"
57 #include "utils/relmapper.h"
61 * The map file is critical data: we have no automatic method for recovering
62 * from loss or corruption of it. We use a CRC so that we can detect
63 * corruption. To minimize the risk of failed updates, the map file should
64 * be kept to no more than one standard-size disk sector (ie 512 bytes),
65 * and we use overwrite-in-place rather than playing renaming games.
66 * The struct layout below is designed to occupy exactly 512 bytes, which
67 * might make filesystem updates a bit more efficient.
69 * Entries in the mappings[] array are in no particular order. We could
70 * speed searching by insisting on OID order, but it really shouldn't be
71 * worth the trouble given the intended size of the mapping sets.
73 #define RELMAPPER_FILENAME "pg_filenode.map"
75 #define RELMAPPER_FILEMAGIC 0x592717 /* version ID value */
77 #define MAX_MAPPINGS 62 /* 62 * 8 + 16 = 512 */
79 typedef struct RelMapping
81 Oid mapoid; /* OID of a catalog */
82 Oid mapfilenode; /* its filenode number */
85 typedef struct RelMapFile
87 int32 magic; /* always RELMAPPER_FILEMAGIC */
88 int32 num_mappings; /* number of valid RelMapping entries */
89 RelMapping mappings[MAX_MAPPINGS];
90 pg_crc32c crc; /* CRC of all above */
91 int32 pad; /* to make the struct size be 512 exactly */
95 * State for serializing local and shared relmappings for parallel workers
96 * (active states only). See notes on active_* and pending_* updates state.
98 typedef struct SerializedActiveRelMaps
100 RelMapFile active_shared_updates;
101 RelMapFile active_local_updates;
102 } SerializedActiveRelMaps;
105 * The currently known contents of the shared map file and our database's
106 * local map file are stored here. These can be reloaded from disk
107 * immediately whenever we receive an update sinval message.
109 static RelMapFile shared_map;
110 static RelMapFile local_map;
113 * We use the same RelMapFile data structure to track uncommitted local
114 * changes in the mappings (but note the magic and crc fields are not made
115 * valid in these variables). Currently, map updates are not allowed within
116 * subtransactions, so one set of transaction-level changes is sufficient.
118 * The active_xxx variables contain updates that are valid in our transaction
119 * and should be honored by RelationMapOidToFilenode. The pending_xxx
120 * variables contain updates we have been told about that aren't active yet;
121 * they will become active at the next CommandCounterIncrement. This setup
122 * lets map updates act similarly to updates of pg_class rows, ie, they
123 * become visible only at the next CommandCounterIncrement boundary.
125 * Active shared and active local updates are serialized by the parallel
126 * infrastructure, and deserialized within parallel workers.
128 static RelMapFile active_shared_updates;
129 static RelMapFile active_local_updates;
130 static RelMapFile pending_shared_updates;
131 static RelMapFile pending_local_updates;
134 /* non-export function prototypes */
135 static void apply_map_update(RelMapFile *map, Oid relationId, Oid fileNode,
137 static void merge_map_updates(RelMapFile *map, const RelMapFile *updates,
139 static void load_relmap_file(bool shared);
140 static void write_relmap_file(bool shared, RelMapFile *newmap,
141 bool write_wal, bool send_sinval, bool preserve_files,
142 Oid dbid, Oid tsid, const char *dbpath);
143 static void perform_relmap_update(bool shared, const RelMapFile *updates);
147 * RelationMapOidToFilenode
149 * The raison d' etre ... given a relation OID, look up its filenode.
151 * Although shared and local relation OIDs should never overlap, the caller
152 * always knows which we need --- so pass that information to avoid useless
155 * Returns InvalidOid if the OID is not known (which should never happen,
156 * but the caller is in a better position to report a meaningful error).
159 RelationMapOidToFilenode(Oid relationId, bool shared)
161 const RelMapFile *map;
164 /* If there are active updates, believe those over the main maps */
167 map = &active_shared_updates;
168 for (i = 0; i < map->num_mappings; i++)
170 if (relationId == map->mappings[i].mapoid)
171 return map->mappings[i].mapfilenode;
174 for (i = 0; i < map->num_mappings; i++)
176 if (relationId == map->mappings[i].mapoid)
177 return map->mappings[i].mapfilenode;
182 map = &active_local_updates;
183 for (i = 0; i < map->num_mappings; i++)
185 if (relationId == map->mappings[i].mapoid)
186 return map->mappings[i].mapfilenode;
189 for (i = 0; i < map->num_mappings; i++)
191 if (relationId == map->mappings[i].mapoid)
192 return map->mappings[i].mapfilenode;
200 * RelationMapFilenodeToOid
202 * Do the reverse of the normal direction of mapping done in
203 * RelationMapOidToFilenode.
205 * This is not supposed to be used during normal running but rather for
206 * information purposes when looking at the filesystem or xlog.
208 * Returns InvalidOid if the OID is not known; this can easily happen if the
209 * relfilenode doesn't pertain to a mapped relation.
212 RelationMapFilenodeToOid(Oid filenode, bool shared)
214 const RelMapFile *map;
217 /* If there are active updates, believe those over the main maps */
220 map = &active_shared_updates;
221 for (i = 0; i < map->num_mappings; i++)
223 if (filenode == map->mappings[i].mapfilenode)
224 return map->mappings[i].mapoid;
227 for (i = 0; i < map->num_mappings; i++)
229 if (filenode == map->mappings[i].mapfilenode)
230 return map->mappings[i].mapoid;
235 map = &active_local_updates;
236 for (i = 0; i < map->num_mappings; i++)
238 if (filenode == map->mappings[i].mapfilenode)
239 return map->mappings[i].mapoid;
242 for (i = 0; i < map->num_mappings; i++)
244 if (filenode == map->mappings[i].mapfilenode)
245 return map->mappings[i].mapoid;
253 * RelationMapUpdateMap
255 * Install a new relfilenode mapping for the specified relation.
257 * If immediate is true (or we're bootstrapping), the mapping is activated
258 * immediately. Otherwise it is made pending until CommandCounterIncrement.
261 RelationMapUpdateMap(Oid relationId, Oid fileNode, bool shared,
266 if (IsBootstrapProcessingMode())
269 * In bootstrap mode, the mapping gets installed in permanent map.
279 * We don't currently support map changes within subtransactions, or
280 * when in parallel mode. This could be done with more bookkeeping
281 * infrastructure, but it doesn't presently seem worth it.
283 if (GetCurrentTransactionNestLevel() > 1)
284 elog(ERROR, "cannot change relation mapping within subtransaction");
286 if (IsInParallelMode())
287 elog(ERROR, "cannot change relation mapping in parallel mode");
291 /* Make it active, but only locally */
293 map = &active_shared_updates;
295 map = &active_local_updates;
299 /* Make it pending */
301 map = &pending_shared_updates;
303 map = &pending_local_updates;
306 apply_map_update(map, relationId, fileNode, true);
312 * Insert a new mapping into the given map variable, replacing any existing
313 * mapping for the same relation.
315 * In some cases the caller knows there must be an existing mapping; pass
316 * add_okay = false to draw an error if not.
319 apply_map_update(RelMapFile *map, Oid relationId, Oid fileNode, bool add_okay)
323 /* Replace any existing mapping */
324 for (i = 0; i < map->num_mappings; i++)
326 if (relationId == map->mappings[i].mapoid)
328 map->mappings[i].mapfilenode = fileNode;
333 /* Nope, need to add a new mapping */
335 elog(ERROR, "attempt to apply a mapping to unmapped relation %u",
337 if (map->num_mappings >= MAX_MAPPINGS)
338 elog(ERROR, "ran out of space in relation map");
339 map->mappings[map->num_mappings].mapoid = relationId;
340 map->mappings[map->num_mappings].mapfilenode = fileNode;
347 * Merge all the updates in the given pending-update map into the target map.
348 * This is just a bulk form of apply_map_update.
351 merge_map_updates(RelMapFile *map, const RelMapFile *updates, bool add_okay)
355 for (i = 0; i < updates->num_mappings; i++)
357 apply_map_update(map,
358 updates->mappings[i].mapoid,
359 updates->mappings[i].mapfilenode,
365 * RelationMapRemoveMapping
367 * Remove a relation's entry in the map. This is only allowed for "active"
368 * (but not committed) local mappings. We need it so we can back out the
369 * entry for the transient target file when doing VACUUM FULL/CLUSTER on
373 RelationMapRemoveMapping(Oid relationId)
375 RelMapFile *map = &active_local_updates;
378 for (i = 0; i < map->num_mappings; i++)
380 if (relationId == map->mappings[i].mapoid)
382 /* Found it, collapse it out */
383 map->mappings[i] = map->mappings[map->num_mappings - 1];
388 elog(ERROR, "could not find temporary mapping for relation %u",
393 * RelationMapInvalidate
395 * This routine is invoked for SI cache flush messages. We must re-read
396 * the indicated map file. However, we might receive a SI message in a
397 * process that hasn't yet, and might never, load the mapping files;
398 * for example the autovacuum launcher, which *must not* try to read
399 * a local map since it is attached to no particular database.
400 * So, re-read only if the map is valid now.
403 RelationMapInvalidate(bool shared)
407 if (shared_map.magic == RELMAPPER_FILEMAGIC)
408 load_relmap_file(true);
412 if (local_map.magic == RELMAPPER_FILEMAGIC)
413 load_relmap_file(false);
418 * RelationMapInvalidateAll
420 * Reload all map files. This is used to recover from SI message buffer
421 * overflow: we can't be sure if we missed an inval message.
422 * Again, reload only currently-valid maps.
425 RelationMapInvalidateAll(void)
427 if (shared_map.magic == RELMAPPER_FILEMAGIC)
428 load_relmap_file(true);
429 if (local_map.magic == RELMAPPER_FILEMAGIC)
430 load_relmap_file(false);
436 * Activate any "pending" relation map updates at CommandCounterIncrement time.
439 AtCCI_RelationMap(void)
441 if (pending_shared_updates.num_mappings != 0)
443 merge_map_updates(&active_shared_updates,
444 &pending_shared_updates,
446 pending_shared_updates.num_mappings = 0;
448 if (pending_local_updates.num_mappings != 0)
450 merge_map_updates(&active_local_updates,
451 &pending_local_updates,
453 pending_local_updates.num_mappings = 0;
458 * AtEOXact_RelationMap
460 * Handle relation mapping at main-transaction commit or abort.
462 * During commit, this must be called as late as possible before the actual
463 * transaction commit, so as to minimize the window where the transaction
464 * could still roll back after committing map changes. Although nothing
465 * critically bad happens in such a case, we still would prefer that it
466 * not happen, since we'd possibly be losing useful updates to the relations'
469 * During abort, we just have to throw away any pending map changes.
470 * Normal post-abort cleanup will take care of fixing relcache entries.
471 * Parallel worker commit/abort is handled by resetting active mappings
472 * that may have been received from the leader process. (There should be
473 * no pending updates in parallel workers.)
476 AtEOXact_RelationMap(bool isCommit, bool isParallelWorker)
478 if (isCommit && !isParallelWorker)
481 * We should not get here with any "pending" updates. (We could
482 * logically choose to treat such as committed, but in the current
483 * code this should never happen.)
485 Assert(pending_shared_updates.num_mappings == 0);
486 Assert(pending_local_updates.num_mappings == 0);
489 * Write any active updates to the actual map files, then reset them.
491 if (active_shared_updates.num_mappings != 0)
493 perform_relmap_update(true, &active_shared_updates);
494 active_shared_updates.num_mappings = 0;
496 if (active_local_updates.num_mappings != 0)
498 perform_relmap_update(false, &active_local_updates);
499 active_local_updates.num_mappings = 0;
504 /* Abort or parallel worker --- drop all local and pending updates */
505 Assert(!isParallelWorker || pending_shared_updates.num_mappings == 0);
506 Assert(!isParallelWorker || pending_local_updates.num_mappings == 0);
508 active_shared_updates.num_mappings = 0;
509 active_local_updates.num_mappings = 0;
510 pending_shared_updates.num_mappings = 0;
511 pending_local_updates.num_mappings = 0;
516 * AtPrepare_RelationMap
518 * Handle relation mapping at PREPARE.
520 * Currently, we don't support preparing any transaction that changes the map.
523 AtPrepare_RelationMap(void)
525 if (active_shared_updates.num_mappings != 0 ||
526 active_local_updates.num_mappings != 0 ||
527 pending_shared_updates.num_mappings != 0 ||
528 pending_local_updates.num_mappings != 0)
530 (errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
531 errmsg("cannot PREPARE a transaction that modified relation mapping")));
535 * CheckPointRelationMap
537 * This is called during a checkpoint. It must ensure that any relation map
538 * updates that were WAL-logged before the start of the checkpoint are
539 * securely flushed to disk and will not need to be replayed later. This
540 * seems unlikely to be a performance-critical issue, so we use a simple
541 * method: we just take and release the RelationMappingLock. This ensures
542 * that any already-logged map update is complete, because write_relmap_file
543 * will fsync the map file before the lock is released.
546 CheckPointRelationMap(void)
548 LWLockAcquire(RelationMappingLock, LW_SHARED);
549 LWLockRelease(RelationMappingLock);
553 * RelationMapFinishBootstrap
555 * Write out the initial relation mapping files at the completion of
556 * bootstrap. All the mapped files should have been made known to us
557 * via RelationMapUpdateMap calls.
560 RelationMapFinishBootstrap(void)
562 Assert(IsBootstrapProcessingMode());
564 /* Shouldn't be anything "pending" ... */
565 Assert(active_shared_updates.num_mappings == 0);
566 Assert(active_local_updates.num_mappings == 0);
567 Assert(pending_shared_updates.num_mappings == 0);
568 Assert(pending_local_updates.num_mappings == 0);
570 /* Write the files; no WAL or sinval needed */
571 write_relmap_file(true, &shared_map, false, false, false,
572 InvalidOid, GLOBALTABLESPACE_OID, NULL);
573 write_relmap_file(false, &local_map, false, false, false,
574 MyDatabaseId, MyDatabaseTableSpace, DatabasePath);
578 * RelationMapInitialize
580 * This initializes the mapper module at process startup. We can't access the
581 * database yet, so just make sure the maps are empty.
584 RelationMapInitialize(void)
586 /* The static variables should initialize to zeroes, but let's be sure */
587 shared_map.magic = 0; /* mark it not loaded */
589 shared_map.num_mappings = 0;
590 local_map.num_mappings = 0;
591 active_shared_updates.num_mappings = 0;
592 active_local_updates.num_mappings = 0;
593 pending_shared_updates.num_mappings = 0;
594 pending_local_updates.num_mappings = 0;
598 * RelationMapInitializePhase2
600 * This is called to prepare for access to pg_database during startup.
601 * We should be able to read the shared map file now.
604 RelationMapInitializePhase2(void)
607 * In bootstrap mode, the map file isn't there yet, so do nothing.
609 if (IsBootstrapProcessingMode())
613 * Load the shared map file, die on error.
615 load_relmap_file(true);
619 * RelationMapInitializePhase3
621 * This is called as soon as we have determined MyDatabaseId and set up
622 * DatabasePath. At this point we should be able to read the local map file.
625 RelationMapInitializePhase3(void)
628 * In bootstrap mode, the map file isn't there yet, so do nothing.
630 if (IsBootstrapProcessingMode())
634 * Load the local map file, die on error.
636 load_relmap_file(false);
640 * EstimateRelationMapSpace
642 * Estimate space needed to pass active shared and local relmaps to parallel
646 EstimateRelationMapSpace(void)
648 return sizeof(SerializedActiveRelMaps);
652 * SerializeRelationMap
654 * Serialize active shared and local relmap state for parallel workers.
657 SerializeRelationMap(Size maxSize, char *startAddress)
659 SerializedActiveRelMaps *relmaps;
661 Assert(maxSize >= EstimateRelationMapSpace());
663 relmaps = (SerializedActiveRelMaps *) startAddress;
664 relmaps->active_shared_updates = active_shared_updates;
665 relmaps->active_local_updates = active_local_updates;
671 * Restore active shared and local relmap state within a parallel worker.
674 RestoreRelationMap(char *startAddress)
676 SerializedActiveRelMaps *relmaps;
678 if (active_shared_updates.num_mappings != 0 ||
679 active_local_updates.num_mappings != 0 ||
680 pending_shared_updates.num_mappings != 0 ||
681 pending_local_updates.num_mappings != 0)
682 elog(ERROR, "parallel worker has existing mappings");
684 relmaps = (SerializedActiveRelMaps *) startAddress;
685 active_shared_updates = relmaps->active_shared_updates;
686 active_local_updates = relmaps->active_local_updates;
690 * load_relmap_file -- load data from the shared or local map file
692 * Because the map file is essential for access to core system catalogs,
693 * failure to read it is a fatal error.
695 * Note that the local case requires DatabasePath to be set up.
698 load_relmap_file(bool shared)
701 char mapfilename[MAXPGPATH];
708 snprintf(mapfilename, sizeof(mapfilename), "global/%s",
714 snprintf(mapfilename, sizeof(mapfilename), "%s/%s",
715 DatabasePath, RELMAPPER_FILENAME);
720 fd = OpenTransientFile(mapfilename, O_RDONLY | PG_BINARY);
723 (errcode_for_file_access(),
724 errmsg("could not open file \"%s\": %m",
728 * Note: we could take RelationMappingLock in shared mode here, but it
729 * seems unnecessary since our read() should be atomic against any
730 * concurrent updater's write(). If the file is updated shortly after we
731 * look, the sinval signaling mechanism will make us re-read it before we
732 * are able to access any relation that's affected by the change.
734 pgstat_report_wait_start(WAIT_EVENT_RELATION_MAP_READ);
735 r = read(fd, map, sizeof(RelMapFile));
736 if (r != sizeof(RelMapFile))
740 (errcode_for_file_access(),
741 errmsg("could not read file \"%s\": %m", mapfilename)));
744 (errcode(ERRCODE_DATA_CORRUPTED),
745 errmsg("could not read file \"%s\": read %d of %zu",
746 mapfilename, r, sizeof(RelMapFile))));
748 pgstat_report_wait_end();
750 CloseTransientFile(fd);
752 /* check for correct magic number, etc */
753 if (map->magic != RELMAPPER_FILEMAGIC ||
754 map->num_mappings < 0 ||
755 map->num_mappings > MAX_MAPPINGS)
757 (errmsg("relation mapping file \"%s\" contains invalid data",
762 COMP_CRC32C(crc, (char *) map, offsetof(RelMapFile, crc));
765 if (!EQ_CRC32C(crc, map->crc))
767 (errmsg("relation mapping file \"%s\" contains incorrect checksum",
772 * Write out a new shared or local map file with the given contents.
774 * The magic number and CRC are automatically updated in *newmap. On
775 * success, we copy the data to the appropriate permanent static variable.
777 * If write_wal is true then an appropriate WAL message is emitted.
778 * (It will be false for bootstrap and WAL replay cases.)
780 * If send_sinval is true then a SI invalidation message is sent.
781 * (This should be true except in bootstrap case.)
783 * If preserve_files is true then the storage manager is warned not to
784 * delete the files listed in the map.
786 * Because this may be called during WAL replay when MyDatabaseId,
787 * DatabasePath, etc aren't valid, we require the caller to pass in suitable
788 * values. The caller is also responsible for being sure no concurrent
789 * map update could be happening.
792 write_relmap_file(bool shared, RelMapFile *newmap,
793 bool write_wal, bool send_sinval, bool preserve_files,
794 Oid dbid, Oid tsid, const char *dbpath)
798 char mapfilename[MAXPGPATH];
801 * Fill in the overhead fields and update CRC.
803 newmap->magic = RELMAPPER_FILEMAGIC;
804 if (newmap->num_mappings < 0 || newmap->num_mappings > MAX_MAPPINGS)
805 elog(ERROR, "attempt to write bogus relation mapping");
807 INIT_CRC32C(newmap->crc);
808 COMP_CRC32C(newmap->crc, (char *) newmap, offsetof(RelMapFile, crc));
809 FIN_CRC32C(newmap->crc);
812 * Open the target file. We prefer to do this before entering the
813 * critical section, so that an open() failure need not force PANIC.
817 snprintf(mapfilename, sizeof(mapfilename), "global/%s",
819 realmap = &shared_map;
823 snprintf(mapfilename, sizeof(mapfilename), "%s/%s",
824 dbpath, RELMAPPER_FILENAME);
825 realmap = &local_map;
828 fd = OpenTransientFile(mapfilename, O_WRONLY | O_CREAT | PG_BINARY);
831 (errcode_for_file_access(),
832 errmsg("could not open file \"%s\": %m",
837 xl_relmap_update xlrec;
840 /* now errors are fatal ... */
841 START_CRIT_SECTION();
845 xlrec.nbytes = sizeof(RelMapFile);
848 XLogRegisterData((char *) (&xlrec), MinSizeOfRelmapUpdate);
849 XLogRegisterData((char *) newmap, sizeof(RelMapFile));
851 lsn = XLogInsert(RM_RELMAP_ID, XLOG_RELMAP_UPDATE);
853 /* As always, WAL must hit the disk before the data update does */
858 pgstat_report_wait_start(WAIT_EVENT_RELATION_MAP_WRITE);
859 if (write(fd, newmap, sizeof(RelMapFile)) != sizeof(RelMapFile))
861 /* if write didn't set errno, assume problem is no disk space */
865 (errcode_for_file_access(),
866 errmsg("could not write file \"%s\": %m",
869 pgstat_report_wait_end();
872 * We choose to fsync the data to disk before considering the task done.
873 * It would be possible to relax this if it turns out to be a performance
874 * issue, but it would complicate checkpointing --- see notes for
875 * CheckPointRelationMap.
877 pgstat_report_wait_start(WAIT_EVENT_RELATION_MAP_SYNC);
878 if (pg_fsync(fd) != 0)
880 (errcode_for_file_access(),
881 errmsg("could not fsync file \"%s\": %m",
883 pgstat_report_wait_end();
885 if (CloseTransientFile(fd))
887 (errcode_for_file_access(),
888 errmsg("could not close file \"%s\": %m",
892 * Now that the file is safely on disk, send sinval message to let other
893 * backends know to re-read it. We must do this inside the critical
894 * section: if for some reason we fail to send the message, we have to
895 * force a database-wide PANIC. Otherwise other backends might continue
896 * execution with stale mapping information, which would be catastrophic
897 * as soon as others began to use the now-committed data.
900 CacheInvalidateRelmap(dbid);
903 * Make sure that the files listed in the map are not deleted if the outer
904 * transaction aborts. This had better be within the critical section
905 * too: it's not likely to fail, but if it did, we'd arrive at transaction
906 * abort with the files still vulnerable. PANICing will leave things in a
907 * good state on-disk.
909 * Note: we're cheating a little bit here by assuming that mapped files
910 * are either in pg_global or the database's default tablespace.
916 for (i = 0; i < newmap->num_mappings; i++)
920 rnode.spcNode = tsid;
922 rnode.relNode = newmap->mappings[i].mapfilenode;
923 RelationPreserveStorage(rnode, false);
927 /* Success, update permanent copy */
928 memcpy(realmap, newmap, sizeof(RelMapFile));
930 /* Critical section done */
936 * Merge the specified updates into the appropriate "real" map,
937 * and write out the changes. This function must be used for committing
938 * updates during normal multiuser operation.
941 perform_relmap_update(bool shared, const RelMapFile *updates)
946 * Anyone updating a relation's mapping info should take exclusive lock on
947 * that rel and hold it until commit. This ensures that there will not be
948 * concurrent updates on the same mapping value; but there could easily be
949 * concurrent updates on different values in the same file. We cover that
950 * by acquiring the RelationMappingLock, re-reading the target file to
951 * ensure it's up to date, applying the updates, and writing the data
952 * before releasing RelationMappingLock.
954 * There is only one RelationMappingLock. In principle we could try to
955 * have one per mapping file, but it seems unlikely to be worth the
958 LWLockAcquire(RelationMappingLock, LW_EXCLUSIVE);
960 /* Be certain we see any other updates just made */
961 load_relmap_file(shared);
963 /* Prepare updated data in a local variable */
965 memcpy(&newmap, &shared_map, sizeof(RelMapFile));
967 memcpy(&newmap, &local_map, sizeof(RelMapFile));
970 * Apply the updates to newmap. No new mappings should appear, unless
971 * somebody is adding indexes to system catalogs.
973 merge_map_updates(&newmap, updates, allowSystemTableMods);
975 /* Write out the updated map and do other necessary tasks */
976 write_relmap_file(shared, &newmap, true, true, true,
977 (shared ? InvalidOid : MyDatabaseId),
978 (shared ? GLOBALTABLESPACE_OID : MyDatabaseTableSpace),
981 /* Now we can release the lock */
982 LWLockRelease(RelationMappingLock);
986 * RELMAP resource manager's routines
989 relmap_redo(XLogReaderState *record)
991 uint8 info = XLogRecGetInfo(record) & ~XLR_INFO_MASK;
993 /* Backup blocks are not used in relmap records */
994 Assert(!XLogRecHasAnyBlockRefs(record));
996 if (info == XLOG_RELMAP_UPDATE)
998 xl_relmap_update *xlrec = (xl_relmap_update *) XLogRecGetData(record);
1002 if (xlrec->nbytes != sizeof(RelMapFile))
1003 elog(PANIC, "relmap_redo: wrong size %u in relmap update record",
1005 memcpy(&newmap, xlrec->data, sizeof(newmap));
1007 /* We need to construct the pathname for this database */
1008 dbpath = GetDatabasePath(xlrec->dbid, xlrec->tsid);
1011 * Write out the new map and send sinval, but of course don't write a
1012 * new WAL entry. There's no surrounding transaction to tell to
1013 * preserve files, either.
1015 * There shouldn't be anyone else updating relmaps during WAL replay,
1016 * so we don't bother to take the RelationMappingLock. We would need
1017 * to do so if load_relmap_file needed to interlock against writers.
1019 write_relmap_file((xlrec->dbid == InvalidOid), &newmap,
1021 xlrec->dbid, xlrec->tsid, dbpath);
1026 elog(PANIC, "relmap_redo: unknown op code %u", info);