1 /*-------------------------------------------------------------------------
4 * POSTGRES C Backend Interface
6 * Portions Copyright (c) 1996-2003, PostgreSQL Global Development Group
7 * Portions Copyright (c) 1994, Regents of the University of California
11 * $PostgreSQL: pgsql/src/backend/tcop/postgres.c,v 1.420 2004/06/11 01:09:00 tgl Exp $
14 * this is the "main" module of the postgres backend and
15 * hence the main module of the "traffic cop".
17 *-------------------------------------------------------------------------
25 #include <sys/socket.h>
28 #include <sys/select.h>
34 #include "access/printtup.h"
35 #include "access/xlog.h"
36 #include "catalog/pg_type.h"
37 #include "commands/async.h"
38 #include "commands/prepare.h"
39 #include "commands/trigger.h"
40 #include "libpq/libpq.h"
41 #include "libpq/pqformat.h"
42 #include "libpq/pqsignal.h"
43 #include "miscadmin.h"
44 #include "nodes/print.h"
45 #include "optimizer/cost.h"
46 #include "optimizer/planner.h"
47 #include "parser/analyze.h"
48 #include "parser/parser.h"
49 #include "rewrite/rewriteHandler.h"
50 #include "storage/freespace.h"
51 #include "storage/ipc.h"
52 #include "storage/pg_shmem.h"
53 #include "storage/proc.h"
54 #include "storage/sinval.h"
55 #include "tcop/fastpath.h"
56 #include "tcop/pquery.h"
57 #include "tcop/tcopprot.h"
58 #include "tcop/utility.h"
59 #include "utils/guc.h"
60 #include "utils/lsyscache.h"
61 #include "utils/memutils.h"
62 #include "utils/ps_status.h"
63 #include "mb/pg_wchar.h"
74 const char *debug_query_string; /* for pgmonitor and
75 * log_min_error_statement */
77 /* Note: whereToSendOutput is initialized for the bootstrap/standalone case */
78 CommandDest whereToSendOutput = Debug;
80 /* note: these declarations had better match tcopprot.h */
81 sigjmp_buf Warn_restart;
83 bool Warn_restart_ready = false;
86 /* flag for logging end of session */
87 bool Log_disconnections = false;
89 LogStmtLevel log_statement = LOGSTMT_NONE;
91 /* GUC variable for maximum stack depth (measured in kilobytes) */
92 int max_stack_depth = 2048;
100 /* max_stack_depth converted to bytes for speed of checking */
101 static int max_stack_depth_bytes = 2048*1024;
103 /* stack base pointer (initialized by PostgresMain) */
104 static char *stack_base_ptr = NULL;
108 * Flag to mark SIGHUP. Whenever the main loop comes around it
109 * will reread the configuration file. (Better than doing the
110 * reading in the signal handler, ey?)
112 static volatile sig_atomic_t got_SIGHUP = false;
115 * Flag to keep track of whether we have started a transaction.
116 * For extended query protocol this has to be remembered across messages.
118 static bool xact_started = false;
121 * Flags to implement skip-till-Sync-after-error behavior for messages of
122 * the extended query protocol.
124 static bool doing_extended_query_message = false;
125 static bool ignore_till_sync = false;
128 * If an unnamed prepared statement exists, it's stored here.
129 * We keep it separate from the hashtable kept by commands/prepare.c
130 * in order to reduce overhead for short-lived queries.
132 static MemoryContext unnamed_stmt_context = NULL;
133 static PreparedStatement *unnamed_stmt_pstmt = NULL;
136 static bool EchoQuery = false; /* default don't echo */
139 * people who want to use EOF should #define DONTUSENEWLINE in
142 #ifndef TCOP_DONTUSENEWLINE
143 static int UseNewLine = 1; /* Use newlines query delimiters (the
147 static int UseNewLine = 0; /* Use EOF as query delimiters */
148 #endif /* TCOP_DONTUSENEWLINE */
151 /* ----------------------------------------------------------------
152 * decls for routines only used in this file
153 * ----------------------------------------------------------------
155 static int InteractiveBackend(StringInfo inBuf);
156 static int SocketBackend(StringInfo inBuf);
157 static int ReadCommand(StringInfo inBuf);
158 static void start_xact_command(void);
159 static void finish_xact_command(void);
160 static void SigHupHandler(SIGNAL_ARGS);
161 static void FloatExceptionHandler(SIGNAL_ARGS);
162 static void log_disconnections(int code, Datum arg);
165 /* ----------------------------------------------------------------
166 * routines to obtain user input
167 * ----------------------------------------------------------------
171 * InteractiveBackend() is called for user interactive connections
173 * the string entered by the user is placed in its parameter inBuf,
174 * and we act like a Q message was received.
176 * EOF is returned if end-of-file input is seen; time to shut down.
181 InteractiveBackend(StringInfo inBuf)
183 int c; /* character read from getc() */
184 bool end = false; /* end-of-input flag */
185 bool backslashSeen = false; /* have we seen a \ ? */
188 * display a prompt and obtain input from the user
193 /* Reset inBuf to empty */
195 inBuf->data[0] = '\0';
203 * if we are using \n as a delimiter, then read characters
206 while ((c = getc(stdin)) != EOF)
212 /* discard backslash from inBuf */
213 inBuf->data[--inBuf->len] = '\0';
214 backslashSeen = false;
219 /* keep the newline character */
220 appendStringInfoChar(inBuf, '\n');
225 backslashSeen = true;
227 backslashSeen = false;
229 appendStringInfoChar(inBuf, (char) c);
238 * otherwise read characters until EOF.
240 while ((c = getc(stdin)) != EOF)
241 appendStringInfoChar(inBuf, (char) c);
251 * otherwise we have a user query so process it.
256 /* Add '\0' to make it look the same as message case. */
257 appendStringInfoChar(inBuf, (char) '\0');
260 * if the query echo flag was given, print the query..
263 printf("statement: %s\n", inBuf->data);
270 * SocketBackend() Is called for frontend-backend connections
272 * Returns the message type code, and loads message body data into inBuf.
274 * EOF is returned if the connection is lost.
278 SocketBackend(StringInfo inBuf)
283 * Get message type code from the frontend.
285 qtype = pq_getbyte();
287 if (qtype == EOF) /* frontend disconnected */
290 (errcode(ERRCODE_PROTOCOL_VIOLATION),
291 errmsg("unexpected EOF on client connection")));
296 * Validate message type code before trying to read body; if we have
297 * lost sync, better to say "command unknown" than to run out of
298 * memory because we used garbage as a length word.
300 * This also gives us a place to set the doing_extended_query_message
301 * flag as soon as possible.
305 case 'Q': /* simple query */
306 doing_extended_query_message = false;
307 if (PG_PROTOCOL_MAJOR(FrontendProtocol) < 3)
309 /* old style without length word; convert */
310 if (pq_getstring(inBuf))
313 (errcode(ERRCODE_PROTOCOL_VIOLATION),
314 errmsg("unexpected EOF on client connection")));
320 case 'F': /* fastpath function call */
321 /* we let fastpath.c cope with old-style input of this */
322 doing_extended_query_message = false;
325 case 'X': /* terminate */
326 doing_extended_query_message = false;
327 ignore_till_sync = false;
331 case 'C': /* close */
332 case 'D': /* describe */
333 case 'E': /* execute */
334 case 'H': /* flush */
335 case 'P': /* parse */
336 doing_extended_query_message = true;
337 /* these are only legal in protocol 3 */
338 if (PG_PROTOCOL_MAJOR(FrontendProtocol) < 3)
340 (errcode(ERRCODE_PROTOCOL_VIOLATION),
341 errmsg("invalid frontend message type %d", qtype)));
345 /* stop any active skip-till-Sync */
346 ignore_till_sync = false;
347 /* mark not-extended, so that a new error doesn't begin skip */
348 doing_extended_query_message = false;
349 /* only legal in protocol 3 */
350 if (PG_PROTOCOL_MAJOR(FrontendProtocol) < 3)
352 (errcode(ERRCODE_PROTOCOL_VIOLATION),
353 errmsg("invalid frontend message type %d", qtype)));
356 case 'd': /* copy data */
357 case 'c': /* copy done */
358 case 'f': /* copy fail */
359 doing_extended_query_message = false;
360 /* these are only legal in protocol 3 */
361 if (PG_PROTOCOL_MAJOR(FrontendProtocol) < 3)
363 (errcode(ERRCODE_PROTOCOL_VIOLATION),
364 errmsg("invalid frontend message type %d", qtype)));
370 * Otherwise we got garbage from the frontend. We treat this
371 * as fatal because we have probably lost message boundary
372 * sync, and there's no good way to recover.
375 (errcode(ERRCODE_PROTOCOL_VIOLATION),
376 errmsg("invalid frontend message type %d", qtype)));
381 * In protocol version 3, all frontend messages have a length word
382 * next after the type code; we can read the message contents
383 * independently of the type.
385 if (PG_PROTOCOL_MAJOR(FrontendProtocol) >= 3)
387 if (pq_getmessage(inBuf, 0))
388 return EOF; /* suitable message already logged */
395 * ReadCommand reads a command from either the frontend or
396 * standard input, places it in inBuf, and returns the
397 * message type code (first byte of the message).
398 * EOF is returned if end of file.
402 ReadCommand(StringInfo inBuf)
406 if (whereToSendOutput == Remote)
407 result = SocketBackend(inBuf);
409 result = InteractiveBackend(inBuf);
415 * Parse a query string and pass it through the rewriter.
417 * A list of Query nodes is returned, since the string might contain
418 * multiple queries and/or the rewriter might expand one query to several.
420 * NOTE: this routine is no longer used for processing interactive queries,
421 * but it is still needed for parsing of SQL function bodies.
424 pg_parse_and_rewrite(const char *query_string, /* string to execute */
425 Oid *paramTypes, /* parameter types */
426 int numParams) /* number of parameters */
428 List *raw_parsetree_list;
429 List *querytree_list;
433 * (1) parse the request string into a list of raw parse trees.
435 raw_parsetree_list = pg_parse_query(query_string);
438 * (2) Do parse analysis and rule rewrite.
440 querytree_list = NIL;
441 foreach(list_item, raw_parsetree_list)
443 Node *parsetree = (Node *) lfirst(list_item);
445 querytree_list = list_concat(querytree_list,
446 pg_analyze_and_rewrite(parsetree,
451 return querytree_list;
455 * Do raw parsing (only).
457 * A list of parsetrees is returned, since there might be multiple
458 * commands in the given string.
460 * NOTE: for interactive queries, it is important to keep this routine
461 * separate from the analysis & rewrite stages. Analysis and rewriting
462 * cannot be done in an aborted transaction, since they require access to
463 * database tables. So, we rely on the raw parser to determine whether
464 * we've seen a COMMIT or ABORT command; when we are in abort state, other
465 * commands are not processed any further than the raw parse stage.
468 pg_parse_query(const char *query_string)
470 List *raw_parsetree_list;
471 ListCell *parsetree_item;
473 if (log_statement == LOGSTMT_ALL)
475 (errmsg("statement: %s", query_string)));
477 if (log_parser_stats)
480 raw_parsetree_list = raw_parser(query_string);
482 /* do log_statement tests for mod and ddl */
483 if (log_statement == LOGSTMT_MOD ||
484 log_statement == LOGSTMT_DDL)
486 foreach(parsetree_item, raw_parsetree_list)
488 Node *parsetree = (Node *) lfirst(parsetree_item);
489 const char *commandTag;
491 if (IsA(parsetree, ExplainStmt) &&
492 ((ExplainStmt *)parsetree)->analyze)
493 parsetree = (Node *)(((ExplainStmt *)parsetree)->query);
495 if (IsA(parsetree, PrepareStmt))
496 parsetree = (Node *)(((PrepareStmt *)parsetree)->query);
498 if (IsA(parsetree, SelectStmt))
499 continue; /* optimization for frequent command */
501 if (log_statement == LOGSTMT_MOD &&
502 (IsA(parsetree, InsertStmt) ||
503 IsA(parsetree, UpdateStmt) ||
504 IsA(parsetree, DeleteStmt) ||
505 IsA(parsetree, TruncateStmt) ||
506 (IsA(parsetree, CopyStmt) &&
507 ((CopyStmt *)parsetree)->is_from))) /* COPY FROM */
510 (errmsg("statement: %s", query_string)));
513 commandTag = CreateCommandTag(parsetree);
514 if (strncmp(commandTag, "CREATE ", strlen("CREATE ")) == 0 ||
515 strncmp(commandTag, "ALTER ", strlen("ALTER ")) == 0 ||
516 strncmp(commandTag, "DROP ", strlen("DROP ")) == 0 ||
517 IsA(parsetree, GrantStmt) || /* GRANT or REVOKE */
518 IsA(parsetree, CommentStmt))
521 (errmsg("statement: %s", query_string)));
527 if (log_parser_stats)
528 ShowUsage("PARSER STATISTICS");
530 return raw_parsetree_list;
534 * Given a raw parsetree (gram.y output), and optionally information about
535 * types of parameter symbols ($n), perform parse analysis and rule rewriting.
537 * A list of Query nodes is returned, since either the analyzer or the
538 * rewriter might expand one query to several.
540 * NOTE: for reasons mentioned above, this must be separate from raw parsing.
543 pg_analyze_and_rewrite(Node *parsetree, Oid *paramTypes, int numParams)
545 List *querytree_list;
548 * (1) Perform parse analysis.
550 if (log_parser_stats)
553 querytree_list = parse_analyze(parsetree, paramTypes, numParams);
555 if (log_parser_stats)
556 ShowUsage("PARSE ANALYSIS STATISTICS");
559 * (2) Rewrite the queries, as necessary
561 querytree_list = pg_rewrite_queries(querytree_list);
563 return querytree_list;
567 * Perform rewriting of a list of queries produced by parse analysis.
570 pg_rewrite_queries(List *querytree_list)
572 List *new_list = NIL;
575 if (log_parser_stats)
579 * rewritten queries are collected in new_list. Note there may be
580 * more or fewer than in the original list.
582 foreach(list_item, querytree_list)
584 Query *querytree = (Query *) lfirst(list_item);
586 if (Debug_print_parse)
587 elog_node_display(DEBUG1, "parse tree", querytree,
590 if (querytree->commandType == CMD_UTILITY)
592 /* don't rewrite utilities, just dump 'em into new_list */
593 new_list = lappend(new_list, querytree);
597 /* rewrite regular queries */
598 List *rewritten = QueryRewrite(querytree);
600 new_list = list_concat(new_list, rewritten);
604 querytree_list = new_list;
606 if (log_parser_stats)
607 ShowUsage("REWRITER STATISTICS");
609 #ifdef COPY_PARSE_PLAN_TREES
612 * Optional debugging check: pass querytree output through
615 new_list = (List *) copyObject(querytree_list);
616 /* This checks both copyObject() and the equal() routines... */
617 if (!equal(new_list, querytree_list))
618 elog(WARNING, "copyObject() failed to produce an equal parse tree");
620 querytree_list = new_list;
623 if (Debug_print_rewritten)
624 elog_node_display(DEBUG1, "rewritten parse tree", querytree_list,
627 return querytree_list;
631 /* Generate a plan for a single already-rewritten query. */
633 pg_plan_query(Query *querytree, ParamListInfo boundParams)
637 /* Utility commands have no plans. */
638 if (querytree->commandType == CMD_UTILITY)
641 if (log_planner_stats)
644 /* call the optimizer */
645 plan = planner(querytree, false, 0, boundParams);
647 if (log_planner_stats)
648 ShowUsage("PLANNER STATISTICS");
650 #ifdef COPY_PARSE_PLAN_TREES
651 /* Optional debugging check: pass plan output through copyObject() */
653 Plan *new_plan = (Plan *) copyObject(plan);
656 * equal() currently does not have routines to compare Plan nodes,
657 * so don't try to test equality here. Perhaps fix someday?
660 /* This checks both copyObject() and the equal() routines... */
661 if (!equal(new_plan, plan))
662 elog(WARNING, "copyObject() failed to produce an equal plan tree");
670 * Print plan if debugging.
672 if (Debug_print_plan)
673 elog_node_display(DEBUG1, "plan", plan, Debug_pretty_print);
679 * Generate plans for a list of already-rewritten queries.
681 * If needSnapshot is TRUE, we haven't yet set a snapshot for the current
682 * query. A snapshot must be set before invoking the planner, since it
683 * might try to evaluate user-defined functions. But we must not set a
684 * snapshot if the list contains only utility statements, because some
685 * utility statements depend on not having frozen the snapshot yet.
686 * (We assume that such statements cannot appear together with plannable
687 * statements in the rewriter's output.)
690 pg_plan_queries(List *querytrees, ParamListInfo boundParams,
693 List *plan_list = NIL;
694 ListCell *query_list;
696 foreach(query_list, querytrees)
698 Query *query = (Query *) lfirst(query_list);
701 if (query->commandType == CMD_UTILITY)
703 /* Utility commands have no plans. */
711 needSnapshot = false;
713 plan = pg_plan_query(query, boundParams);
716 plan_list = lappend(plan_list, plan);
726 * Execute a "simple Query" protocol message.
729 exec_simple_query(const char *query_string)
731 CommandDest dest = whereToSendOutput;
732 MemoryContext oldcontext;
733 List *parsetree_list;
734 ListCell *parsetree_item;
735 struct timeval start_t,
737 bool save_log_duration = log_duration;
738 int save_log_min_duration_statement = log_min_duration_statement;
739 bool save_log_statement_stats = log_statement_stats;
742 * Report query to various monitoring facilities.
744 debug_query_string = query_string;
746 pgstat_report_activity(query_string);
749 * We use save_log_* so "SET log_duration = true" and "SET
750 * log_min_duration_statement = true" don't report incorrect time
751 * because gettimeofday() wasn't called. Similarly,
752 * log_statement_stats has to be captured once.
754 if (save_log_duration || save_log_min_duration_statement != -1)
755 gettimeofday(&start_t, NULL);
757 if (save_log_statement_stats)
761 * Start up a transaction command. All queries generated by the
762 * query_string will be in this same command block, *unless* we find a
763 * BEGIN/COMMIT/ABORT statement; we have to force a new xact command
764 * after one of those, else bad things will happen in xact.c. (Note
765 * that this will normally change current memory context.)
767 start_xact_command();
770 * Zap any pre-existing unnamed statement. (While not strictly
771 * necessary, it seems best to define simple-Query mode as if it used
772 * the unnamed statement and portal; this ensures we recover any
773 * storage used by prior unnamed operations.)
775 unnamed_stmt_pstmt = NULL;
776 if (unnamed_stmt_context)
778 DropDependentPortals(unnamed_stmt_context);
779 MemoryContextDelete(unnamed_stmt_context);
781 unnamed_stmt_context = NULL;
784 * Switch to appropriate context for constructing parsetrees.
786 oldcontext = MemoryContextSwitchTo(MessageContext);
788 QueryContext = CurrentMemoryContext;
791 * Do basic parsing of the query or queries (this should be safe even
792 * if we are in aborted transaction state!)
794 parsetree_list = pg_parse_query(query_string);
797 * Switch back to transaction context to enter the loop.
799 MemoryContextSwitchTo(oldcontext);
802 * Run through the raw parsetree(s) and process each one.
804 foreach(parsetree_item, parsetree_list)
806 Node *parsetree = (Node *) lfirst(parsetree_item);
807 const char *commandTag;
808 char completionTag[COMPLETION_TAG_BUFSIZE];
809 List *querytree_list,
812 DestReceiver *receiver;
816 * Get the command name for use in status display (it also becomes
817 * the default completion tag, down inside PortalRun). Set
818 * ps_status and do any special start-of-SQL-command processing
819 * needed by the destination.
821 commandTag = CreateCommandTag(parsetree);
823 set_ps_display(commandTag);
825 BeginCommand(commandTag, dest);
828 * If we are in an aborted transaction, reject all commands except
829 * COMMIT/ABORT. It is important that this test occur before we
830 * try to do parse analysis, rewrite, or planning, since all those
831 * phases try to do database accesses, which may fail in abort
832 * state. (It might be safe to allow some additional utility
833 * commands in this state, but not many...)
835 if (IsAbortedTransactionBlockState())
837 bool allowit = false;
839 if (IsA(parsetree, TransactionStmt))
841 TransactionStmt *stmt = (TransactionStmt *) parsetree;
843 if (stmt->kind == TRANS_STMT_COMMIT ||
844 stmt->kind == TRANS_STMT_ROLLBACK)
850 (errcode(ERRCODE_IN_FAILED_SQL_TRANSACTION),
851 errmsg("current transaction is aborted, "
852 "commands ignored until end of transaction block")));
855 /* Make sure we are in a transaction command */
856 start_xact_command();
858 /* If we got a cancel signal in parsing or prior command, quit */
859 CHECK_FOR_INTERRUPTS();
862 * OK to analyze, rewrite, and plan this query.
864 * Switch to appropriate context for constructing querytrees (again,
865 * these must outlive the execution context).
867 oldcontext = MemoryContextSwitchTo(MessageContext);
869 querytree_list = pg_analyze_and_rewrite(parsetree, NULL, 0);
871 plantree_list = pg_plan_queries(querytree_list, NULL, true);
873 /* If we got a cancel signal in analysis or planning, quit */
874 CHECK_FOR_INTERRUPTS();
877 * Create unnamed portal to run the query or queries in. If there
878 * already is one, silently drop it.
880 portal = CreatePortal("", true, true);
882 PortalDefineQuery(portal,
890 * Start the portal. No parameters here.
892 PortalStart(portal, NULL);
895 * Select the appropriate output format: text unless we are doing
896 * a FETCH from a binary cursor. (Pretty grotty to have to do
897 * this here --- but it avoids grottiness in other places. Ah,
898 * the joys of backward compatibility...)
900 format = 0; /* TEXT is default */
901 if (IsA(parsetree, FetchStmt))
903 FetchStmt *stmt = (FetchStmt *) parsetree;
907 Portal fportal = GetPortalByName(stmt->portalname);
909 if (PortalIsValid(fportal) &&
910 (fportal->cursorOptions & CURSOR_OPT_BINARY))
911 format = 1; /* BINARY */
914 PortalSetResultFormat(portal, 1, &format);
917 * Now we can create the destination receiver object.
919 receiver = CreateDestReceiver(dest, portal);
922 * Switch back to transaction context for execution.
924 MemoryContextSwitchTo(oldcontext);
927 * Run the portal to completion, and then drop it (and the
930 (void) PortalRun(portal,
936 (*receiver->rDestroy) (receiver);
938 PortalDrop(portal, false);
940 if (IsA(parsetree, TransactionStmt))
943 * If this was a transaction control statement, commit it. We
944 * will start a new xact command for the next command (if
947 finish_xact_command();
949 else if (lnext(parsetree_item) == NULL)
952 * If this is the last parsetree of the query string, close
953 * down transaction statement before reporting
954 * command-complete. This is so that any end-of-transaction
955 * errors are reported before the command-complete message is
956 * issued, to avoid confusing clients who will expect either a
957 * command-complete message or an error, not one and then the
958 * other. But for compatibility with historical Postgres
959 * behavior, we do not force a transaction boundary between
960 * queries appearing in a single query string.
962 finish_xact_command();
967 * We need a CommandCounterIncrement after every query, except
968 * those that start or end a transaction block.
970 CommandCounterIncrement();
974 * Tell client that we're done with this query. Note we emit
975 * exactly one EndCommand report for each raw parsetree, thus one
976 * for each SQL command the client sent, regardless of rewriting.
977 * (But a command aborted by error will not send an EndCommand
980 EndCommand(completionTag, dest);
981 } /* end loop over parsetrees */
984 * Close down transaction statement, if one is open.
986 finish_xact_command();
989 * If there were no parsetrees, return EmptyQueryResponse message.
997 * Combine processing here as we need to calculate the query duration
1000 if (save_log_duration || save_log_min_duration_statement != -1)
1004 gettimeofday(&stop_t, NULL);
1005 if (stop_t.tv_usec < start_t.tv_usec)
1008 stop_t.tv_usec += 1000000;
1010 usecs = (long) (stop_t.tv_sec - start_t.tv_sec) * 1000000 + (long) (stop_t.tv_usec - start_t.tv_usec);
1012 if (save_log_duration)
1014 (errmsg("duration: %ld.%03ld ms",
1015 (long) ((stop_t.tv_sec - start_t.tv_sec) * 1000 +
1016 (stop_t.tv_usec - start_t.tv_usec) / 1000),
1017 (long) (stop_t.tv_usec - start_t.tv_usec) % 1000)));
1020 * Output a duration_statement to the log if the query has exceeded
1021 * the min duration, or if we are to print all durations.
1023 if (save_log_min_duration_statement == 0 ||
1024 (save_log_min_duration_statement > 0 &&
1025 usecs >= save_log_min_duration_statement * 1000))
1027 (errmsg("duration: %ld.%03ld ms statement: %s",
1028 (long) ((stop_t.tv_sec - start_t.tv_sec) * 1000 +
1029 (stop_t.tv_usec - start_t.tv_usec) / 1000),
1030 (long) (stop_t.tv_usec - start_t.tv_usec) % 1000,
1034 if (save_log_statement_stats)
1035 ShowUsage("QUERY STATISTICS");
1037 debug_query_string = NULL;
1041 * exec_parse_message
1043 * Execute a "Parse" protocol message.
1046 exec_parse_message(const char *query_string, /* string to execute */
1047 const char *stmt_name, /* name for prepared stmt */
1048 Oid *paramTypes, /* parameter types */
1049 int numParams) /* number of parameters */
1051 MemoryContext oldcontext;
1052 List *parsetree_list;
1053 const char *commandTag;
1054 List *querytree_list,
1058 bool save_log_statement_stats = log_statement_stats;
1061 * Report query to various monitoring facilities.
1063 debug_query_string = query_string;
1065 pgstat_report_activity(query_string);
1067 set_ps_display("PARSE");
1069 if (save_log_statement_stats)
1073 * Start up a transaction command so we can run parse analysis etc.
1074 * (Note that this will normally change current memory context.)
1075 * Nothing happens if we are already in one.
1077 start_xact_command();
1080 * Switch to appropriate context for constructing parsetrees.
1082 * We have two strategies depending on whether the prepared statement is
1083 * named or not. For a named prepared statement, we do parsing in
1084 * MessageContext and copy the finished trees into the prepared
1085 * statement's private context; then the reset of MessageContext
1086 * releases temporary space used by parsing and planning. For an
1087 * unnamed prepared statement, we assume the statement isn't going to
1088 * hang around long, so getting rid of temp space quickly is probably
1089 * not worth the costs of copying parse/plan trees. So in this case,
1090 * we set up a special context for the unnamed statement, and do all
1091 * the parsing/planning therein.
1093 is_named = (stmt_name[0] != '\0');
1096 /* Named prepared statement --- parse in MessageContext */
1097 oldcontext = MemoryContextSwitchTo(MessageContext);
1101 /* Unnamed prepared statement --- release any prior unnamed stmt */
1102 unnamed_stmt_pstmt = NULL;
1103 if (unnamed_stmt_context)
1105 DropDependentPortals(unnamed_stmt_context);
1106 MemoryContextDelete(unnamed_stmt_context);
1108 unnamed_stmt_context = NULL;
1109 /* create context for parsing/planning */
1110 unnamed_stmt_context =
1111 AllocSetContextCreate(TopMemoryContext,
1112 "unnamed prepared statement",
1113 ALLOCSET_DEFAULT_MINSIZE,
1114 ALLOCSET_DEFAULT_INITSIZE,
1115 ALLOCSET_DEFAULT_MAXSIZE);
1116 oldcontext = MemoryContextSwitchTo(unnamed_stmt_context);
1119 QueryContext = CurrentMemoryContext;
1122 * Do basic parsing of the query or queries (this should be safe even
1123 * if we are in aborted transaction state!)
1125 parsetree_list = pg_parse_query(query_string);
1128 * We only allow a single user statement in a prepared statement. This
1129 * is mainly to keep the protocol simple --- otherwise we'd need to
1130 * worry about multiple result tupdescs and things like that.
1132 if (list_length(parsetree_list) > 1)
1134 (errcode(ERRCODE_SYNTAX_ERROR),
1135 errmsg("cannot insert multiple commands into a prepared statement")));
1137 if (parsetree_list != NIL)
1139 Node *parsetree = (Node *) linitial(parsetree_list);
1143 * Get the command name for possible use in status display.
1145 commandTag = CreateCommandTag(parsetree);
1148 * If we are in an aborted transaction, reject all commands except
1149 * COMMIT/ROLLBACK. It is important that this test occur before
1150 * we try to do parse analysis, rewrite, or planning, since all
1151 * those phases try to do database accesses, which may fail in
1152 * abort state. (It might be safe to allow some additional utility
1153 * commands in this state, but not many...)
1155 if (IsAbortedTransactionBlockState())
1157 bool allowit = false;
1159 if (IsA(parsetree, TransactionStmt))
1161 TransactionStmt *stmt = (TransactionStmt *) parsetree;
1163 if (stmt->kind == TRANS_STMT_COMMIT ||
1164 stmt->kind == TRANS_STMT_ROLLBACK)
1170 (errcode(ERRCODE_IN_FAILED_SQL_TRANSACTION),
1171 errmsg("current transaction is aborted, "
1172 "commands ignored until end of transaction block")));
1176 * OK to analyze, rewrite, and plan this query. Note that the
1177 * originally specified parameter set is not required to be
1178 * complete, so we have to use parse_analyze_varparams().
1180 if (log_parser_stats)
1183 querytree_list = parse_analyze_varparams(parsetree,
1188 * Check all parameter types got determined, and convert array
1189 * representation to a list for storage.
1192 for (i = 0; i < numParams; i++)
1194 Oid ptype = paramTypes[i];
1196 if (ptype == InvalidOid || ptype == UNKNOWNOID)
1198 (errcode(ERRCODE_INDETERMINATE_DATATYPE),
1199 errmsg("could not determine data type of parameter $%d",
1201 param_list = lappend_oid(param_list, ptype);
1204 if (log_parser_stats)
1205 ShowUsage("PARSE ANALYSIS STATISTICS");
1207 querytree_list = pg_rewrite_queries(querytree_list);
1210 * If this is the unnamed statement and it has parameters, defer
1211 * query planning until Bind. Otherwise do it now.
1213 if (!is_named && numParams > 0)
1214 plantree_list = NIL;
1216 plantree_list = pg_plan_queries(querytree_list, NULL, true);
1220 /* Empty input string. This is legal. */
1222 querytree_list = NIL;
1223 plantree_list = NIL;
1227 /* If we got a cancel signal in analysis or planning, quit */
1228 CHECK_FOR_INTERRUPTS();
1231 * Store the query as a prepared statement. See above comments.
1235 StorePreparedStatement(stmt_name,
1244 PreparedStatement *pstmt;
1246 pstmt = (PreparedStatement *) palloc0(sizeof(PreparedStatement));
1247 /* query_string needs to be copied into unnamed_stmt_context */
1248 pstmt->query_string = pstrdup(query_string);
1249 /* the rest is there already */
1250 pstmt->commandTag = commandTag;
1251 pstmt->query_list = querytree_list;
1252 pstmt->plan_list = plantree_list;
1253 pstmt->argtype_list = param_list;
1254 pstmt->context = unnamed_stmt_context;
1255 /* Now the unnamed statement is complete and valid */
1256 unnamed_stmt_pstmt = pstmt;
1259 MemoryContextSwitchTo(oldcontext);
1261 QueryContext = NULL;
1264 * We do NOT close the open transaction command here; that only
1265 * happens when the client sends Sync. Instead, do
1266 * CommandCounterIncrement just in case something happened during
1269 CommandCounterIncrement();
1272 * Send ParseComplete.
1274 if (whereToSendOutput == Remote)
1275 pq_putemptymessage('1');
1277 if (save_log_statement_stats)
1278 ShowUsage("PARSE MESSAGE STATISTICS");
1280 debug_query_string = NULL;
1286 * Process a "Bind" message to create a portal from a prepared statement
1289 exec_bind_message(StringInfo input_message)
1291 const char *portal_name;
1292 const char *stmt_name;
1294 int16 *pformats = NULL;
1297 int16 *rformats = NULL;
1299 PreparedStatement *pstmt;
1301 ParamListInfo params;
1302 bool isaborted = IsAbortedTransactionBlockState();
1304 pgstat_report_activity("<BIND>");
1306 set_ps_display("BIND");
1309 * Start up a transaction command so we can call functions etc. (Note
1310 * that this will normally change current memory context.) Nothing
1311 * happens if we are already in one.
1313 start_xact_command();
1315 /* Switch back to message context */
1316 MemoryContextSwitchTo(MessageContext);
1318 /* Get the fixed part of the message */
1319 portal_name = pq_getmsgstring(input_message);
1320 stmt_name = pq_getmsgstring(input_message);
1322 /* Get the parameter format codes */
1323 numPFormats = pq_getmsgint(input_message, 2);
1324 if (numPFormats > 0)
1326 pformats = (int16 *) palloc(numPFormats * sizeof(int16));
1327 for (i = 0; i < numPFormats; i++)
1328 pformats[i] = pq_getmsgint(input_message, 2);
1331 /* Get the parameter value count */
1332 numParams = pq_getmsgint(input_message, 2);
1334 if (numPFormats > 1 && numPFormats != numParams)
1336 (errcode(ERRCODE_PROTOCOL_VIOLATION),
1337 errmsg("bind message has %d parameter formats but %d parameters",
1338 numPFormats, numParams)));
1340 /* Find prepared statement */
1341 if (stmt_name[0] != '\0')
1342 pstmt = FetchPreparedStatement(stmt_name, true);
1345 /* special-case the unnamed statement */
1346 pstmt = unnamed_stmt_pstmt;
1349 (errcode(ERRCODE_UNDEFINED_PSTATEMENT),
1350 errmsg("unnamed prepared statement does not exist")));
1353 if (numParams != list_length(pstmt->argtype_list))
1355 (errcode(ERRCODE_PROTOCOL_VIOLATION),
1356 errmsg("bind message supplies %d parameters, but prepared statement \"%s\" requires %d",
1357 numParams, stmt_name, list_length(pstmt->argtype_list))));
1360 * Create the portal. Allow silent replacement of an existing portal
1361 * only if the unnamed portal is specified.
1363 if (portal_name[0] == '\0')
1364 portal = CreatePortal(portal_name, true, true);
1366 portal = CreatePortal(portal_name, false, false);
1369 * Fetch parameters, if any, and store in the portal's memory context.
1371 * In an aborted transaction, we can't risk calling user-defined
1372 * functions, but we can't fail to Bind either, so bind all parameters
1378 MemoryContext oldContext;
1380 oldContext = MemoryContextSwitchTo(PortalGetHeapMemory(portal));
1382 params = (ParamListInfo)
1383 palloc0((numParams + 1) * sizeof(ParamListInfoData));
1386 foreach(l, pstmt->argtype_list)
1388 Oid ptype = lfirst_oid(l);
1392 plength = pq_getmsgint(input_message, 4);
1393 isNull = (plength == -1);
1397 const char *pvalue = pq_getmsgbytes(input_message, plength);
1401 /* We don't bother to check the format in this case */
1407 StringInfoData pbuf;
1410 if (numPFormats > 1)
1411 pformat = pformats[i];
1412 else if (numPFormats > 0)
1413 pformat = pformats[0];
1415 pformat = 0; /* default = text */
1418 * Rather than copying data around, we just set up a
1419 * phony StringInfo pointing to the correct portion of
1420 * the message buffer. We assume we can scribble on
1421 * the message buffer so as to maintain the convention
1422 * that StringInfos have a trailing null. This is
1423 * grotty but is a big win when dealing with very
1424 * large parameter strings.
1426 pbuf.data = (char *) pvalue;
1427 pbuf.maxlen = plength + 1;
1431 csave = pbuf.data[plength];
1432 pbuf.data[plength] = '\0';
1440 getTypeInputInfo(ptype, &typinput, &typioparam);
1443 * We have to do encoding conversion before
1444 * calling the typinput routine.
1447 pg_client_to_server((unsigned char *) pbuf.data,
1450 OidFunctionCall3(typinput,
1451 CStringGetDatum(pstring),
1452 ObjectIdGetDatum(typioparam),
1454 /* Free result of encoding conversion, if any */
1455 if (pstring != pbuf.data)
1458 else if (pformat == 1)
1464 * Call the parameter type's binary input
1467 getTypeBinaryInputInfo(ptype, &typreceive, &typioparam);
1470 OidFunctionCall2(typreceive,
1471 PointerGetDatum(&pbuf),
1472 ObjectIdGetDatum(typioparam));
1474 /* Trouble if it didn't eat the whole buffer */
1475 if (pbuf.cursor != pbuf.len)
1477 (errcode(ERRCODE_INVALID_BINARY_REPRESENTATION),
1478 errmsg("incorrect binary data format in bind parameter %d",
1484 (errcode(ERRCODE_INVALID_PARAMETER_VALUE),
1485 errmsg("unsupported format code: %d",
1489 /* Restore message buffer contents */
1490 pbuf.data[plength] = csave;
1494 params[i].kind = PARAM_NUM;
1495 params[i].id = i + 1;
1496 params[i].isnull = isNull;
1501 params[i].kind = PARAM_INVALID;
1503 MemoryContextSwitchTo(oldContext);
1508 /* Get the result format codes */
1509 numRFormats = pq_getmsgint(input_message, 2);
1510 if (numRFormats > 0)
1512 rformats = (int16 *) palloc(numRFormats * sizeof(int16));
1513 for (i = 0; i < numRFormats; i++)
1514 rformats[i] = pq_getmsgint(input_message, 2);
1517 pq_getmsgend(input_message);
1520 * If we didn't plan the query before, do it now. This allows the
1521 * planner to make use of the concrete parameter values we now have.
1523 * This happens only for unnamed statements, and so switching into
1524 * the statement context for planning is correct (see notes in
1525 * exec_parse_message).
1527 if (pstmt->plan_list == NIL && pstmt->query_list != NIL &&
1530 MemoryContext oldContext = MemoryContextSwitchTo(pstmt->context);
1532 pstmt->plan_list = pg_plan_queries(pstmt->query_list, params, true);
1533 MemoryContextSwitchTo(oldContext);
1537 * Define portal and start execution.
1539 PortalDefineQuery(portal,
1540 pstmt->query_string,
1546 PortalStart(portal, params);
1549 * Apply the result format requests to the portal.
1551 PortalSetResultFormat(portal, numRFormats, rformats);
1554 * Send BindComplete.
1556 if (whereToSendOutput == Remote)
1557 pq_putemptymessage('2');
1561 * exec_execute_message
1563 * Process an "Execute" message for a portal
1566 exec_execute_message(const char *portal_name, long max_rows)
1569 DestReceiver *receiver;
1571 bool is_trans_stmt = false;
1572 bool is_trans_exit = false;
1574 char completionTag[COMPLETION_TAG_BUFSIZE];
1576 /* Adjust destination to tell printtup.c what to do */
1577 dest = whereToSendOutput;
1579 dest = RemoteExecute;
1581 portal = GetPortalByName(portal_name);
1582 if (!PortalIsValid(portal))
1584 (errcode(ERRCODE_UNDEFINED_CURSOR),
1585 errmsg("portal \"%s\" does not exist", portal_name)));
1588 * If the original query was a null string, just return
1589 * EmptyQueryResponse.
1591 if (portal->commandTag == NULL)
1593 Assert(portal->parseTrees == NIL);
1598 if (portal->sourceText)
1600 debug_query_string = portal->sourceText;
1601 pgstat_report_activity(portal->sourceText);
1605 debug_query_string = "execute message";
1606 pgstat_report_activity("<EXECUTE>");
1609 set_ps_display(portal->commandTag);
1611 BeginCommand(portal->commandTag, dest);
1613 /* Check for transaction-control commands */
1614 if (list_length(portal->parseTrees) == 1)
1616 Query *query = (Query *) linitial(portal->parseTrees);
1618 if (query->commandType == CMD_UTILITY &&
1619 query->utilityStmt != NULL &&
1620 IsA(query->utilityStmt, TransactionStmt))
1622 TransactionStmt *stmt = (TransactionStmt *) query->utilityStmt;
1624 is_trans_stmt = true;
1625 if (stmt->kind == TRANS_STMT_COMMIT ||
1626 stmt->kind == TRANS_STMT_ROLLBACK)
1627 is_trans_exit = true;
1632 * Create dest receiver in MessageContext (we don't want it in
1633 * transaction context, because that may get deleted if portal
1636 receiver = CreateDestReceiver(dest, portal);
1639 * Ensure we are in a transaction command (this should normally be the
1640 * case already due to prior BIND).
1642 start_xact_command();
1645 * If we are in aborted transaction state, the only portals we can
1646 * actually run are those containing COMMIT or ROLLBACK commands.
1648 if (IsAbortedTransactionBlockState())
1652 (errcode(ERRCODE_IN_FAILED_SQL_TRANSACTION),
1653 errmsg("current transaction is aborted, "
1654 "commands ignored until end of transaction block")));
1657 /* Check for cancel signal before we start execution */
1658 CHECK_FOR_INTERRUPTS();
1661 * Okay to run the portal.
1664 max_rows = FETCH_ALL;
1666 completed = PortalRun(portal,
1672 (*receiver->rDestroy) (receiver);
1679 * If this was a transaction control statement, commit it. We
1680 * will start a new xact command for the next command (if
1683 finish_xact_command();
1688 * We need a CommandCounterIncrement after every query, except
1689 * those that start or end a transaction block.
1691 CommandCounterIncrement();
1694 /* Send appropriate CommandComplete to client */
1695 EndCommand(completionTag, dest);
1699 /* Portal run not complete, so send PortalSuspended */
1700 if (whereToSendOutput == Remote)
1701 pq_putemptymessage('s');
1704 debug_query_string = NULL;
1708 * exec_describe_statement_message
1710 * Process a "Describe" message for a prepared statement
1713 exec_describe_statement_message(const char *stmt_name)
1715 PreparedStatement *pstmt;
1720 /* Find prepared statement */
1721 if (stmt_name[0] != '\0')
1722 pstmt = FetchPreparedStatement(stmt_name, true);
1725 /* special-case the unnamed statement */
1726 pstmt = unnamed_stmt_pstmt;
1729 (errcode(ERRCODE_UNDEFINED_PSTATEMENT),
1730 errmsg("unnamed prepared statement does not exist")));
1733 if (whereToSendOutput != Remote)
1734 return; /* can't actually do anything... */
1737 * First describe the parameters...
1739 pq_beginmessage(&buf, 't'); /* parameter description message type */
1740 pq_sendint(&buf, list_length(pstmt->argtype_list), 2);
1742 foreach(l, pstmt->argtype_list)
1744 Oid ptype = lfirst_oid(l);
1746 pq_sendint(&buf, (int) ptype, 4);
1748 pq_endmessage(&buf);
1751 * Next send RowDescription or NoData to describe the result...
1753 tupdesc = FetchPreparedStatementResultDesc(pstmt);
1758 if (ChoosePortalStrategy(pstmt->query_list) == PORTAL_ONE_SELECT)
1759 targetlist = ((Query *) linitial(pstmt->query_list))->targetList;
1762 SendRowDescriptionMessage(tupdesc, targetlist, NULL);
1765 pq_putemptymessage('n'); /* NoData */
1770 * exec_describe_portal_message
1772 * Process a "Describe" message for a portal
1775 exec_describe_portal_message(const char *portal_name)
1779 portal = GetPortalByName(portal_name);
1780 if (!PortalIsValid(portal))
1782 (errcode(ERRCODE_UNDEFINED_CURSOR),
1783 errmsg("portal \"%s\" does not exist", portal_name)));
1785 if (whereToSendOutput != Remote)
1786 return; /* can't actually do anything... */
1788 if (portal->tupDesc)
1792 if (portal->strategy == PORTAL_ONE_SELECT)
1793 targetlist = ((Query *) linitial(portal->parseTrees))->targetList;
1796 SendRowDescriptionMessage(portal->tupDesc, targetlist,
1800 pq_putemptymessage('n'); /* NoData */
1805 * Convenience routines for starting/committing a single command.
1808 start_xact_command(void)
1813 (errmsg_internal("StartTransactionCommand")));
1814 StartTransactionCommand();
1816 /* Set statement timeout running, if any */
1817 if (StatementTimeout > 0)
1818 enable_sig_alarm(StatementTimeout, true);
1820 xact_started = true;
1825 finish_xact_command(void)
1829 /* Invoke IMMEDIATE constraint triggers */
1830 DeferredTriggerEndQuery();
1832 /* Cancel any active statement timeout before committing */
1833 disable_sig_alarm(true);
1835 /* Now commit the command */
1837 (errmsg_internal("CommitTransactionCommand")));
1839 CommitTransactionCommand();
1841 #ifdef MEMORY_CONTEXT_CHECKING
1842 /* Check all memory contexts that weren't freed during commit */
1843 /* (those that were, were checked before being deleted) */
1844 MemoryContextCheck(TopMemoryContext);
1847 #ifdef SHOW_MEMORY_STATS
1848 /* Print mem stats after each commit for leak tracking */
1850 MemoryContextStats(TopMemoryContext);
1853 xact_started = false;
1858 /* --------------------------------
1859 * signal handler routines used in PostgresMain()
1860 * --------------------------------
1864 * quickdie() occurs when signalled SIGQUIT by the postmaster.
1866 * Some backend has bought the farm,
1867 * so we need to stop what we're doing and exit.
1870 quickdie(SIGNAL_ARGS)
1872 PG_SETMASK(&BlockSig);
1875 * Ideally this should be ereport(FATAL), but then we'd not get
1876 * control back (perhaps could fix by doing local sigsetjmp?)
1879 (errcode(ERRCODE_CRASH_SHUTDOWN),
1880 errmsg("terminating connection because of crash of another server process"),
1881 errdetail("The postmaster has commanded this server process to roll back"
1882 " the current transaction and exit, because another"
1883 " server process exited abnormally and possibly corrupted"
1885 errhint("In a moment you should be able to reconnect to the"
1886 " database and repeat your command.")));
1889 * DO NOT proc_exit() -- we're here because shared memory may be
1890 * corrupted, so we don't want to try to clean up our transaction.
1891 * Just nail the windows shut and get out of town.
1893 * Note we do exit(1) not exit(0). This is to force the postmaster into
1894 * a system reset cycle if some idiot DBA sends a manual SIGQUIT to a
1895 * random backend. This is necessary precisely because we don't clean
1896 * up our shared memory state.
1902 * Shutdown signal from postmaster: abort transaction and exit
1903 * at soonest convenient time
1908 int save_errno = errno;
1910 /* Don't joggle the elbow of proc_exit */
1911 if (!proc_exit_inprogress)
1913 InterruptPending = true;
1914 ProcDiePending = true;
1917 * If it's safe to interrupt, and we're waiting for input or a
1918 * lock, service the interrupt immediately
1920 if (ImmediateInterruptOK && InterruptHoldoffCount == 0 &&
1921 CritSectionCount == 0)
1923 /* bump holdoff count to make ProcessInterrupts() a no-op */
1924 /* until we are done getting ready for it */
1925 InterruptHoldoffCount++;
1926 DisableNotifyInterrupt();
1927 DisableCatchupInterrupt();
1928 /* Make sure CheckDeadLock won't run while shutting down... */
1930 InterruptHoldoffCount--;
1931 ProcessInterrupts();
1939 * Timeout or shutdown signal from postmaster during client authentication.
1942 * XXX: possible future improvement: try to send a message indicating
1943 * why we are disconnecting. Problem is to be sure we don't block while
1944 * doing so, nor mess up the authentication message exchange.
1947 authdie(SIGNAL_ARGS)
1953 * Query-cancel signal from postmaster: abort current transaction
1954 * at soonest convenient time
1957 StatementCancelHandler(SIGNAL_ARGS)
1959 int save_errno = errno;
1962 * Don't joggle the elbow of proc_exit, nor an already-in-progress
1965 if (!proc_exit_inprogress && !InError)
1967 InterruptPending = true;
1968 QueryCancelPending = true;
1971 * If it's safe to interrupt, and we're waiting for a lock,
1972 * service the interrupt immediately. No point in interrupting if
1973 * we're waiting for input, however.
1975 if (ImmediateInterruptOK && InterruptHoldoffCount == 0 &&
1976 CritSectionCount == 0)
1978 /* bump holdoff count to make ProcessInterrupts() a no-op */
1979 /* until we are done getting ready for it */
1980 InterruptHoldoffCount++;
1981 if (LockWaitCancel())
1983 DisableNotifyInterrupt();
1984 DisableCatchupInterrupt();
1985 InterruptHoldoffCount--;
1986 ProcessInterrupts();
1989 InterruptHoldoffCount--;
1996 /* signal handler for floating point exception */
1998 FloatExceptionHandler(SIGNAL_ARGS)
2001 (errcode(ERRCODE_FLOATING_POINT_EXCEPTION),
2002 errmsg("floating-point exception"),
2003 errdetail("An invalid floating-point operation was signaled. "
2004 "This probably means an out-of-range result or an "
2005 "invalid operation, such as division by zero.")));
2008 /* SIGHUP: set flag to re-read config file at next convenient time */
2010 SigHupHandler(SIGNAL_ARGS)
2017 * ProcessInterrupts: out-of-line portion of CHECK_FOR_INTERRUPTS() macro
2019 * If an interrupt condition is pending, and it's safe to service it,
2020 * then clear the flag and accept the interrupt. Called only when
2021 * InterruptPending is true.
2024 ProcessInterrupts(void)
2026 /* OK to accept interrupt now? */
2027 if (InterruptHoldoffCount != 0 || CritSectionCount != 0)
2029 InterruptPending = false;
2032 ProcDiePending = false;
2033 QueryCancelPending = false; /* ProcDie trumps QueryCancel */
2034 ImmediateInterruptOK = false; /* not idle anymore */
2035 DisableNotifyInterrupt();
2036 DisableCatchupInterrupt();
2038 (errcode(ERRCODE_ADMIN_SHUTDOWN),
2039 errmsg("terminating connection due to administrator command")));
2041 if (QueryCancelPending)
2043 QueryCancelPending = false;
2044 ImmediateInterruptOK = false; /* not idle anymore */
2045 DisableNotifyInterrupt();
2046 DisableCatchupInterrupt();
2048 (errcode(ERRCODE_QUERY_CANCELED),
2049 errmsg("canceling query due to user request")));
2051 /* If we get here, do nothing (probably, QueryCancelPending was reset) */
2056 * check_stack_depth: check for excessively deep recursion
2058 * This should be called someplace in any recursive routine that might possibly
2059 * recurse deep enough to overflow the stack. Most Unixen treat stack
2060 * overflow as an unrecoverable SIGSEGV, so we want to error out ourselves
2061 * before hitting the hardware limit. Unfortunately we have no direct way
2062 * to detect the hardware limit, so we have to rely on the admin to set a
2063 * GUC variable for it ...
2066 check_stack_depth(void)
2072 * Compute distance from PostgresMain's local variables to my own
2074 * Note: in theory stack_depth should be ptrdiff_t or some such, but
2075 * since the whole point of this code is to bound the value to something
2076 * much less than integer-sized, int should work fine.
2078 stack_depth = (int) (stack_base_ptr - &stack_top_loc);
2080 * Take abs value, since stacks grow up on some machines, down on others
2082 if (stack_depth < 0)
2083 stack_depth = -stack_depth;
2087 * The test on stack_base_ptr prevents us from erroring out if called
2088 * during process setup or in a non-backend process. Logically it should
2089 * be done first, but putting it here avoids wasting cycles during normal
2092 if (stack_depth > max_stack_depth_bytes &&
2093 stack_base_ptr != NULL)
2096 (errcode(ERRCODE_STATEMENT_TOO_COMPLEX),
2097 errmsg("stack depth limit exceeded"),
2098 errhint("Increase the configuration parameter \"max_stack_depth\".")));
2102 /* GUC assign hook to update max_stack_depth_bytes from max_stack_depth */
2104 assign_max_stack_depth(int newval, bool doit, GucSource source)
2106 /* Range check was already handled by guc.c */
2108 max_stack_depth_bytes = newval * 1024;
2114 usage(const char *progname)
2116 printf(gettext("%s is the PostgreSQL stand-alone backend. It is not\nintended to be used by normal users.\n\n"), progname);
2118 printf(gettext("Usage:\n %s [OPTION]... [DBNAME]\n\n"), progname);
2119 printf(gettext("Options:\n"));
2120 #ifdef USE_ASSERT_CHECKING
2121 printf(gettext(" -A 1|0 enable/disable run-time assert checking\n"));
2123 printf(gettext(" -B NBUFFERS number of shared buffers\n"));
2124 printf(gettext(" -c NAME=VALUE set run-time parameter\n"));
2125 printf(gettext(" -d 0-5 debugging level (0 is off)\n"));
2126 printf(gettext(" -D DATADIR database directory\n"));
2127 printf(gettext(" -e use European date input format (DMY)\n"));
2128 printf(gettext(" -E echo query before execution\n"));
2129 printf(gettext(" -F turn fsync off\n"));
2130 printf(gettext(" -N do not use newline as interactive query delimiter\n"));
2131 printf(gettext(" -o FILENAME send stdout and stderr to given file\n"));
2132 printf(gettext(" -P disable system indexes\n"));
2133 printf(gettext(" -s show statistics after each query\n"));
2134 printf(gettext(" -S WORK-MEM set amount of memory for sorts (in kbytes)\n"));
2135 printf(gettext(" --describe-config describe configuration parameters, then exit\n"));
2136 printf(gettext(" --help show this help, then exit\n"));
2137 printf(gettext(" --version output version information, then exit\n"));
2138 printf(gettext("\nDeveloper options:\n"));
2139 printf(gettext(" -f s|i|n|m|h forbid use of some plan types\n"));
2140 printf(gettext(" -i do not execute queries\n"));
2141 printf(gettext(" -O allow system table structure changes\n"));
2142 printf(gettext(" -t pa|pl|ex show timings after each query\n"));
2143 printf(gettext(" -W NUM wait NUM seconds to allow attach from a debugger\n"));
2144 printf(gettext("\nReport bugs to <pgsql-bugs@postgresql.org>.\n"));
2149 /* ----------------------------------------------------------------
2151 * postgres main loop -- all backends, interactive or otherwise start here
2153 * argc/argv are the command line arguments to be used. (When being forked
2154 * by the postmaster, these are not the original argv array of the process.)
2155 * username is the (possibly authenticated) PostgreSQL user name to be used
2157 * ----------------------------------------------------------------
2160 PostgresMain(int argc, char *argv[], const char *username)
2163 const char *dbname = NULL;
2164 char *potential_DataDir = NULL;
2170 GucSource gucsource;
2174 StringInfoData input_message;
2175 volatile bool send_rfq = true;
2178 * Catch standard options before doing much else. This even works on
2179 * systems without getopt_long.
2181 if (!IsUnderPostmaster && argc > 1)
2183 if (strcmp(argv[1], "--help") == 0 || strcmp(argv[1], "-?") == 0)
2188 if (strcmp(argv[1], "--version") == 0 || strcmp(argv[1], "-V") == 0)
2190 puts(PG_VERSIONSTR);
2196 * initialize globals (already done if under postmaster, but not if
2197 * standalone; cheap enough to do over)
2199 MyProcPid = getpid();
2202 * Fire up essential subsystems: error and memory management
2204 * If we are running under the postmaster, this is done already.
2206 if (!IsUnderPostmaster)
2207 MemoryContextInit();
2209 set_ps_display("startup");
2211 SetProcessingMode(InitProcessing);
2213 /* Set up reference point for stack depth checking */
2214 stack_base_ptr = &stack_base;
2216 /* Compute paths, if we didn't inherit them from postmaster */
2217 if (my_exec_path[0] == '\0')
2219 if (find_my_exec(argv[0], my_exec_path) < 0)
2220 elog(FATAL, "%s: could not locate my own executable path",
2224 if (pkglib_path[0] == '\0')
2225 get_pkglib_path(my_exec_path, pkglib_path);
2228 * Set default values for command-line options.
2232 if (!IsUnderPostmaster)
2234 InitializeGUCOptions();
2235 potential_DataDir = getenv("PGDATA");
2239 * parse command line arguments
2241 * There are now two styles of command line layout for the backend:
2243 * For interactive use (not started from postmaster) the format is
2244 * postgres [switches] [databasename]
2245 * If the databasename is omitted it is taken to be the user name.
2247 * When started from the postmaster, the format is
2248 * postgres [secure switches] -p databasename [insecure switches]
2249 * Switches appearing after -p came from the client (via "options"
2250 * field of connection request). For security reasons we restrict
2251 * what these switches can do.
2255 /* all options are allowed until '-p' */
2257 ctx = debug_context = PGC_POSTMASTER;
2258 gucsource = PGC_S_ARGV; /* initial switches came from command line */
2260 while ((flag = getopt(argc, argv, "A:B:c:D:d:Eef:FiNOPo:p:S:st:v:W:-:")) != -1)
2264 #ifdef USE_ASSERT_CHECKING
2265 SetConfigOption("debug_assertions", optarg, ctx, gucsource);
2268 (errcode(ERRCODE_FEATURE_NOT_SUPPORTED),
2269 errmsg("assert checking is not compiled in")));
2276 * specify the size of buffer pool
2278 SetConfigOption("shared_buffers", optarg, ctx, gucsource);
2281 case 'D': /* PGDATA directory */
2283 potential_DataDir = optarg;
2286 case 'd': /* debug level */
2289 * Client option can't decrease debug level. We have
2290 * to do the test here because we group priv and
2291 * client set GUC calls below, after we know the final
2294 if (ctx != PGC_BACKEND || atoi(optarg) > debug_flag)
2296 debug_flag = atoi(optarg);
2297 debug_context = ctx; /* save context for use
2299 /* Set server debugging level. */
2300 if (debug_flag != 0)
2302 char *debugstr = palloc(strlen("debug") + strlen(optarg) + 1);
2304 sprintf(debugstr, "debug%s", optarg);
2305 SetConfigOption("log_min_messages", debugstr, ctx, gucsource);
2312 * -d0 allows user to prevent postmaster debug
2313 * from propagating to backend. It would be
2314 * nice to set it to the postgresql.conf value
2317 SetConfigOption("log_min_messages", "notice",
2326 * E - echo the query the user entered
2334 * Use European date input format (DMY)
2336 SetConfigOption("datestyle", "euro", ctx, gucsource);
2344 SetConfigOption("fsync", "false", ctx, gucsource);
2350 * f - forbid generation of certain plans
2355 case 's': /* seqscan */
2356 tmp = "enable_seqscan";
2358 case 'i': /* indexscan */
2359 tmp = "enable_indexscan";
2361 case 't': /* tidscan */
2362 tmp = "enable_tidscan";
2364 case 'n': /* nestloop */
2365 tmp = "enable_nestloop";
2367 case 'm': /* mergejoin */
2368 tmp = "enable_mergejoin";
2370 case 'h': /* hashjoin */
2371 tmp = "enable_hashjoin";
2377 SetConfigOption(tmp, "false", ctx, gucsource);
2383 * N - Don't use newline as a query delimiter
2391 * allow system table structure modifications
2393 if (secure) /* XXX safe to allow from client??? */
2394 allowSystemTableMods = true;
2400 * ignore system indexes
2402 * As of PG 7.4 this is safe to allow from the client,
2403 * since it only disables reading the system indexes,
2404 * not writing them. Worst case consequence is slowness.
2406 IgnoreSystemIndexes(true);
2412 * o - send output (stdout and stderr) to the given file
2415 StrNCpy(OutputFileName, optarg, MAXPGPATH);
2420 * p - special flag passed if backend was forked by a
2425 dbname = strdup(optarg);
2427 secure = false; /* subsequent switches are NOT
2430 gucsource = PGC_S_CLIENT;
2437 * S - amount of sort memory to use in 1k bytes
2439 SetConfigOption("work_mem", optarg, ctx, gucsource);
2445 * s - report usage statistics (timings) after each query
2447 SetConfigOption("log_statement_stats", "true", ctx, gucsource);
2452 * tell postgres to report usage statistics (timings) for
2455 * -tpa[rser] = print stats for parser time of each query
2456 * -tpl[anner] = print stats for planner time of each query
2457 * -te[xecutor] = print stats for executor time of each query
2458 * caution: -s can not be used together with -t.
2465 if (optarg[1] == 'a')
2466 tmp = "log_parser_stats";
2467 else if (optarg[1] == 'l')
2468 tmp = "log_planner_stats";
2473 tmp = "log_executor_stats";
2480 SetConfigOption(tmp, "true", ctx, gucsource);
2485 FrontendProtocol = (ProtocolVersion) atoi(optarg);
2491 * wait N seconds to allow attach from a debugger
2493 pg_usleep(atoi(optarg)*1000000L);
2502 ParseLongOption(optarg, &name, &value);
2507 (errcode(ERRCODE_SYNTAX_ERROR),
2508 errmsg("--%s requires a value",
2512 (errcode(ERRCODE_SYNTAX_ERROR),
2513 errmsg("-c %s requires a value",
2517 SetConfigOption(name, value, ctx, gucsource);
2531 * -d is not the same as setting log_min_messages because it enables
2532 * other output options.
2534 if (debug_flag >= 1)
2536 SetConfigOption("log_connections", "true", debug_context, gucsource);
2537 SetConfigOption("log_disconnections", "true", debug_context, gucsource);
2539 if (debug_flag >= 2)
2540 SetConfigOption("log_statement", "all", debug_context, gucsource);
2541 if (debug_flag >= 3)
2542 SetConfigOption("debug_print_parse", "true", debug_context, gucsource);
2543 if (debug_flag >= 4)
2544 SetConfigOption("debug_print_plan", "true", debug_context, gucsource);
2545 if (debug_flag >= 5)
2546 SetConfigOption("debug_print_rewritten", "true", debug_context, gucsource);
2549 * Process any additional GUC variable settings passed in startup
2552 if (MyProcPort != NULL)
2554 ListCell *gucopts = list_head(MyProcPort->guc_options);
2561 name = lfirst(gucopts);
2562 gucopts = lnext(gucopts);
2564 value = lfirst(gucopts);
2565 gucopts = lnext(gucopts);
2567 SetConfigOption(name, value, PGC_BACKEND, PGC_S_CLIENT);
2571 * set up handler to log session end.
2573 if (IsUnderPostmaster && Log_disconnections)
2574 on_proc_exit(log_disconnections,0);
2577 if (!IsUnderPostmaster)
2579 if (!potential_DataDir)
2582 gettext("%s does not know where to find the database system data.\n"
2583 "You must specify the directory that contains the database system\n"
2584 "either by specifying the -D invocation option or by setting the\n"
2585 "PGDATA environment variable.\n"),
2589 SetDataDir(potential_DataDir);
2593 /* Acquire configuration parameters, unless inherited from postmaster */
2594 if (!IsUnderPostmaster)
2596 ProcessConfigFile(PGC_POSTMASTER);
2598 /* If timezone is not set, determine what the OS uses */
2599 pg_timezone_initialize();
2603 * Set up signal handlers and masks.
2605 * Note that postmaster blocked all signals before forking child process,
2606 * so there is no race condition whereby we might receive a signal
2607 * before we have set up the handler.
2609 * Also note: it's best not to use any signals that are SIG_IGNored in
2610 * the postmaster. If such a signal arrives before we are able to
2611 * change the handler to non-SIG_IGN, it'll get dropped. Instead,
2612 * make a dummy handler in the postmaster to reserve the signal. (Of
2613 * course, this isn't an issue for signals that are locally generated,
2614 * such as SIGALRM and SIGPIPE.)
2616 pqsignal(SIGHUP, SigHupHandler); /* set flag to read config file */
2617 pqsignal(SIGINT, StatementCancelHandler); /* cancel current query */
2618 pqsignal(SIGTERM, die); /* cancel current query and exit */
2619 pqsignal(SIGQUIT, quickdie); /* hard crash time */
2620 pqsignal(SIGALRM, handle_sig_alarm); /* timeout conditions */
2623 * Ignore failure to write to frontend. Note: if frontend closes
2624 * connection, we will notice it and exit cleanly when control next
2625 * returns to outer loop. This seems safer than forcing exit in the
2626 * midst of output during who-knows-what operation...
2628 pqsignal(SIGPIPE, SIG_IGN);
2629 pqsignal(SIGUSR1, CatchupInterruptHandler);
2630 pqsignal(SIGUSR2, NotifyInterruptHandler);
2631 pqsignal(SIGFPE, FloatExceptionHandler);
2634 * Reset some signals that are accepted by postmaster but not by
2637 pqsignal(SIGCHLD, SIG_DFL); /* system() requires this on some
2642 /* We allow SIGQUIT (quickdie) at all times */
2643 #ifdef HAVE_SIGPROCMASK
2644 sigdelset(&BlockSig, SIGQUIT);
2646 BlockSig &= ~(sigmask(SIGQUIT));
2649 PG_SETMASK(&BlockSig); /* block everything except SIGQUIT */
2652 if (IsUnderPostmaster)
2654 /* noninteractive case: nothing should be left after switches */
2655 if (errs || argc != optind || dbname == NULL)
2658 (errcode(ERRCODE_SYNTAX_ERROR),
2659 errmsg("invalid command-line arguments for server process"),
2660 errhint("Try \"%s --help\" for more information.", argv[0])));
2669 /* interactive case: database name can be last arg on command line */
2670 if (errs || argc - optind > 1)
2673 (errcode(ERRCODE_SYNTAX_ERROR),
2674 errmsg("%s: invalid command-line arguments",
2676 errhint("Try \"%s --help\" for more information.", argv[0])));
2678 else if (argc - optind == 1)
2679 dbname = argv[optind];
2680 else if ((dbname = username) == NULL)
2683 (errcode(ERRCODE_INVALID_PARAMETER_VALUE),
2684 errmsg("%s: no database nor user name specified",
2689 * Validate we have been given a reasonable-looking DataDir (if
2690 * under postmaster, assume postmaster did this already).
2692 ValidatePgVersion(DataDir);
2695 * Create lockfile for data directory.
2697 CreateDataDirLockFile(DataDir, false);
2703 * Start up xlog for standalone backend, and register to have it
2704 * closed down at exit.
2707 on_shmem_exit(ShutdownXLOG, 0);
2710 * Read any existing FSM cache file, and register to write one out
2714 on_shmem_exit(DumpFreeSpaceMap, 0);
2718 * General initialization.
2720 * NOTE: if you are tempted to add code in this vicinity, consider
2721 * putting it inside InitPostgres() instead. In particular, anything
2722 * that involves database access should be there, not here.
2725 (errmsg_internal("InitPostgres")));
2726 InitPostgres(dbname, username);
2728 SetProcessingMode(NormalProcessing);
2731 * Send this backend's cancellation info to the frontend.
2733 if (whereToSendOutput == Remote &&
2734 PG_PROTOCOL_MAJOR(FrontendProtocol) >= 2)
2738 pq_beginmessage(&buf, 'K');
2739 pq_sendint(&buf, (int32) MyProcPid, sizeof(int32));
2740 pq_sendint(&buf, (int32) MyCancelKey, sizeof(int32));
2741 pq_endmessage(&buf);
2742 /* Need not flush since ReadyForQuery will do it. */
2745 /* Welcome banner for standalone case */
2746 if (whereToSendOutput == Debug)
2747 printf("\nPostgreSQL stand-alone backend %s\n", PG_VERSION);
2750 * Create the memory context we will use in the main loop.
2752 * MessageContext is reset once per iteration of the main loop, ie, upon
2753 * completion of processing of each command message from the client.
2755 MessageContext = AllocSetContextCreate(TopMemoryContext,
2757 ALLOCSET_DEFAULT_MINSIZE,
2758 ALLOCSET_DEFAULT_INITSIZE,
2759 ALLOCSET_DEFAULT_MAXSIZE);
2762 * Tell the statistics collector that we're alive and
2763 * to which database we belong.
2769 * POSTGRES main processing loop begins here
2771 * If an exception is encountered, processing resumes here so we abort
2772 * the current transaction and start a new one.
2775 if (sigsetjmp(Warn_restart, 1) != 0)
2778 * NOTE: if you are tempted to add more code in this if-block,
2779 * consider the probability that it should be in
2780 * AbortTransaction() instead.
2782 * Make sure we're not interrupted while cleaning up. Also forget
2783 * any pending QueryCancel request, since we're aborting anyway.
2784 * Force InterruptHoldoffCount to a known state in case we
2785 * ereport'd from inside a holdoff section.
2787 ImmediateInterruptOK = false;
2788 QueryCancelPending = false;
2789 InterruptHoldoffCount = 1;
2790 CritSectionCount = 0; /* should be unnecessary, but... */
2791 disable_sig_alarm(true);
2792 QueryCancelPending = false; /* again in case timeout occurred */
2793 DisableNotifyInterrupt();
2794 DisableCatchupInterrupt();
2795 debug_query_string = NULL;
2798 * Make sure we are in a valid memory context during recovery.
2800 * We use ErrorContext in hopes that it will have some free space
2801 * even if we're otherwise up against it...
2803 MemoryContextSwitchTo(ErrorContext);
2805 /* Do the recovery */
2807 (errmsg_internal("AbortCurrentTransaction")));
2808 AbortCurrentTransaction();
2811 * Now return to normal top-level context and clear ErrorContext
2814 MemoryContextSwitchTo(TopMemoryContext);
2815 MemoryContextResetAndDeleteChildren(ErrorContext);
2816 ActivePortal = NULL;
2817 PortalContext = NULL;
2818 QueryContext = NULL;
2821 * Clear flag to indicate that we got out of error recovery mode
2822 * successfully. (Flag was set in elog.c before longjmp().)
2825 xact_started = false;
2828 * Clear flag that causes accounting for cost based vacuum.
2830 VacuumCostActive = false;
2833 * If we were handling an extended-query-protocol message,
2834 * initiate skip till next Sync. This also causes us not to issue
2835 * ReadyForQuery (until we get Sync).
2837 if (doing_extended_query_message)
2838 ignore_till_sync = true;
2841 * Exit interrupt holdoff section we implicitly established above.
2843 RESUME_INTERRUPTS();
2846 Warn_restart_ready = true; /* we can now handle ereport(ERROR) */
2848 PG_SETMASK(&UnBlockSig);
2850 if (!ignore_till_sync)
2851 send_rfq = true; /* initially, or after error */
2854 * Non-error queries loop here.
2860 * At top of loop, reset extended-query-message flag, so that any
2861 * errors encountered in "idle" state don't provoke skip.
2863 doing_extended_query_message = false;
2866 * Release storage left over from prior query cycle, and create a
2867 * new query input buffer in the cleared MessageContext.
2869 MemoryContextSwitchTo(MessageContext);
2870 MemoryContextResetAndDeleteChildren(MessageContext);
2872 initStringInfo(&input_message);
2875 * (1) If we've reached idle state, tell the frontend we're ready
2878 * Note: this includes fflush()'ing the last of the prior output.
2880 * This is also a good time to send collected statistics to the
2881 * collector, and to update the PS stats display. We avoid doing
2882 * those every time through the message loop because it'd slow down
2883 * processing of batched messages.
2887 pgstat_report_tabstat();
2889 if (IsTransactionOrTransactionBlock())
2891 set_ps_display("idle in transaction");
2892 pgstat_report_activity("<IDLE> in transaction");
2896 set_ps_display("idle");
2897 pgstat_report_activity("<IDLE>");
2900 ReadyForQuery(whereToSendOutput);
2905 * (2) deal with pending asynchronous NOTIFY from other backends,
2906 * and enable async.c's signal handler to execute NOTIFY directly.
2907 * Then set up other stuff needed before blocking for input.
2909 QueryCancelPending = false; /* forget any earlier CANCEL
2912 EnableNotifyInterrupt();
2913 EnableCatchupInterrupt();
2915 /* Allow "die" interrupt to be processed while waiting */
2916 ImmediateInterruptOK = true;
2917 /* and don't forget to detect one that already arrived */
2918 QueryCancelPending = false;
2919 CHECK_FOR_INTERRUPTS();
2922 * (3) read a command (loop blocks here)
2925 firstchar = ReadCommand(&input_message);
2930 * (4) disable async signal conditions again.
2932 ImmediateInterruptOK = false;
2933 QueryCancelPending = false; /* forget any CANCEL signal */
2935 DisableNotifyInterrupt();
2936 DisableCatchupInterrupt();
2939 * (5) check for any other interesting events that happened while
2945 ProcessConfigFile(PGC_SIGHUP);
2949 * (6) process the command. But ignore it if we're skipping till
2952 if (ignore_till_sync && firstchar != EOF)
2957 case 'Q': /* simple query */
2959 const char *query_string;
2961 query_string = pq_getmsgstring(&input_message);
2962 pq_getmsgend(&input_message);
2964 exec_simple_query(query_string);
2970 case 'P': /* parse */
2972 const char *stmt_name;
2973 const char *query_string;
2975 Oid *paramTypes = NULL;
2977 stmt_name = pq_getmsgstring(&input_message);
2978 query_string = pq_getmsgstring(&input_message);
2979 numParams = pq_getmsgint(&input_message, 2);
2984 paramTypes = (Oid *) palloc(numParams * sizeof(Oid));
2985 for (i = 0; i < numParams; i++)
2986 paramTypes[i] = pq_getmsgint(&input_message, 4);
2988 pq_getmsgend(&input_message);
2990 exec_parse_message(query_string, stmt_name,
2991 paramTypes, numParams);
2995 case 'B': /* bind */
2998 * this message is complex enough that it seems best to
2999 * put the field extraction out-of-line
3001 exec_bind_message(&input_message);
3004 case 'E': /* execute */
3006 const char *portal_name;
3009 portal_name = pq_getmsgstring(&input_message);
3010 max_rows = pq_getmsgint(&input_message, 4);
3011 pq_getmsgend(&input_message);
3013 exec_execute_message(portal_name, max_rows);
3017 case 'F': /* fastpath function call */
3018 /* Tell the collector what we're doing */
3019 pgstat_report_activity("<FASTPATH> function call");
3021 /* start an xact for this function invocation */
3022 start_xact_command();
3024 /* switch back to message context */
3025 MemoryContextSwitchTo(MessageContext);
3027 if (HandleFunctionRequest(&input_message) == EOF)
3029 /* lost frontend connection during F message input */
3032 * Reset whereToSendOutput to prevent ereport from
3033 * attempting to send any more messages to client.
3035 if (whereToSendOutput == Remote)
3036 whereToSendOutput = None;
3041 /* commit the function-invocation transaction */
3042 finish_xact_command();
3047 case 'C': /* close */
3050 const char *close_target;
3052 close_type = pq_getmsgbyte(&input_message);
3053 close_target = pq_getmsgstring(&input_message);
3054 pq_getmsgend(&input_message);
3059 if (close_target[0] != '\0')
3060 DropPreparedStatement(close_target, false);
3063 /* special-case the unnamed statement */
3064 unnamed_stmt_pstmt = NULL;
3065 if (unnamed_stmt_context)
3067 DropDependentPortals(unnamed_stmt_context);
3068 MemoryContextDelete(unnamed_stmt_context);
3070 unnamed_stmt_context = NULL;
3077 portal = GetPortalByName(close_target);
3078 if (PortalIsValid(portal))
3079 PortalDrop(portal, false);
3084 (errcode(ERRCODE_PROTOCOL_VIOLATION),
3085 errmsg("invalid CLOSE message subtype %d",
3090 if (whereToSendOutput == Remote)
3091 pq_putemptymessage('3'); /* CloseComplete */
3095 case 'D': /* describe */
3098 const char *describe_target;
3100 describe_type = pq_getmsgbyte(&input_message);
3101 describe_target = pq_getmsgstring(&input_message);
3102 pq_getmsgend(&input_message);
3104 switch (describe_type)
3107 exec_describe_statement_message(describe_target);
3110 exec_describe_portal_message(describe_target);
3114 (errcode(ERRCODE_PROTOCOL_VIOLATION),
3115 errmsg("invalid DESCRIBE message subtype %d",
3122 case 'H': /* flush */
3123 pq_getmsgend(&input_message);
3124 if (whereToSendOutput == Remote)
3128 case 'S': /* sync */
3129 pq_getmsgend(&input_message);
3130 finish_xact_command();
3135 * 'X' means that the frontend is closing down the socket.
3136 * EOF means unexpected loss of frontend connection.
3137 * Either way, perform normal shutdown.
3143 * Reset whereToSendOutput to prevent ereport from
3144 * attempting to send any more messages to client.
3146 if (whereToSendOutput == Remote)
3147 whereToSendOutput = None;
3150 * NOTE: if you are tempted to add more code here, DON'T!
3151 * Whatever you had in mind to do should be set up as an
3152 * on_proc_exit or on_shmem_exit callback, instead.
3153 * Otherwise it will fail to be called during other
3154 * backend-shutdown scenarios.
3156 proc_exit(!in_fatal_exit ? 0 : proc_exit_inprogress ||
3157 !IsUnderPostmaster);
3159 case 'd': /* copy data */
3160 case 'c': /* copy done */
3161 case 'f': /* copy fail */
3164 * Accept but ignore these messages, per protocol spec; we
3165 * probably got here because a COPY failed, and the
3166 * frontend is still sending data.
3172 (errcode(ERRCODE_PROTOCOL_VIOLATION),
3173 errmsg("invalid frontend message type %d",
3176 } /* end of input-reading loop */
3178 /* can't get here because the above loop never exits */
3181 return 1; /* keep compiler quiet */
3184 #ifndef HAVE_GETRUSAGE
3185 #include "rusagestub.h"
3187 #include <sys/resource.h>
3188 #endif /* HAVE_GETRUSAGE */
3190 static struct rusage Save_r;
3191 static struct timeval Save_t;
3196 getrusage(RUSAGE_SELF, &Save_r);
3197 gettimeofday(&Save_t, NULL);
3199 /* ResetTupleCount(); */
3203 ShowUsage(const char *title)
3206 struct timeval user,
3208 struct timeval elapse_t;
3212 getrusage(RUSAGE_SELF, &r);
3213 gettimeofday(&elapse_t, NULL);
3214 memcpy((char *) &user, (char *) &r.ru_utime, sizeof(user));
3215 memcpy((char *) &sys, (char *) &r.ru_stime, sizeof(sys));
3216 if (elapse_t.tv_usec < Save_t.tv_usec)
3219 elapse_t.tv_usec += 1000000;
3221 if (r.ru_utime.tv_usec < Save_r.ru_utime.tv_usec)
3223 r.ru_utime.tv_sec--;
3224 r.ru_utime.tv_usec += 1000000;
3226 if (r.ru_stime.tv_usec < Save_r.ru_stime.tv_usec)
3228 r.ru_stime.tv_sec--;
3229 r.ru_stime.tv_usec += 1000000;
3233 * the only stats we don't show here are for memory usage -- i can't
3234 * figure out how to interpret the relevant fields in the rusage
3235 * struct, and they change names across o/s platforms, anyway. if you
3236 * can figure out what the entries mean, you can somehow extract
3237 * resident set size, shared text size, and unshared data and stack
3240 initStringInfo(&str);
3242 appendStringInfo(&str, "! system usage stats:\n");
3243 appendStringInfo(&str,
3244 "!\t%ld.%06ld elapsed %ld.%06ld user %ld.%06ld system sec\n",
3245 (long) (elapse_t.tv_sec - Save_t.tv_sec),
3246 (long) (elapse_t.tv_usec - Save_t.tv_usec),
3247 (long) (r.ru_utime.tv_sec - Save_r.ru_utime.tv_sec),
3248 (long) (r.ru_utime.tv_usec - Save_r.ru_utime.tv_usec),
3249 (long) (r.ru_stime.tv_sec - Save_r.ru_stime.tv_sec),
3250 (long) (r.ru_stime.tv_usec - Save_r.ru_stime.tv_usec));
3251 appendStringInfo(&str,
3252 "!\t[%ld.%06ld user %ld.%06ld sys total]\n",
3254 (long) user.tv_usec,
3256 (long) sys.tv_usec);
3257 /* BeOS has rusage but only has some fields, and not these... */
3258 #if defined(HAVE_GETRUSAGE)
3259 appendStringInfo(&str,
3260 "!\t%ld/%ld [%ld/%ld] filesystem blocks in/out\n",
3261 r.ru_inblock - Save_r.ru_inblock,
3262 /* they only drink coffee at dec */
3263 r.ru_oublock - Save_r.ru_oublock,
3264 r.ru_inblock, r.ru_oublock);
3265 appendStringInfo(&str,
3266 "!\t%ld/%ld [%ld/%ld] page faults/reclaims, %ld [%ld] swaps\n",
3267 r.ru_majflt - Save_r.ru_majflt,
3268 r.ru_minflt - Save_r.ru_minflt,
3269 r.ru_majflt, r.ru_minflt,
3270 r.ru_nswap - Save_r.ru_nswap,
3272 appendStringInfo(&str,
3273 "!\t%ld [%ld] signals rcvd, %ld/%ld [%ld/%ld] messages rcvd/sent\n",
3274 r.ru_nsignals - Save_r.ru_nsignals,
3276 r.ru_msgrcv - Save_r.ru_msgrcv,
3277 r.ru_msgsnd - Save_r.ru_msgsnd,
3278 r.ru_msgrcv, r.ru_msgsnd);
3279 appendStringInfo(&str,
3280 "!\t%ld/%ld [%ld/%ld] voluntary/involuntary context switches\n",
3281 r.ru_nvcsw - Save_r.ru_nvcsw,
3282 r.ru_nivcsw - Save_r.ru_nivcsw,
3283 r.ru_nvcsw, r.ru_nivcsw);
3284 #endif /* HAVE_GETRUSAGE */
3286 bufusage = ShowBufferUsage();
3287 appendStringInfo(&str, "! buffer usage stats:\n%s", bufusage);
3290 /* remove trailing newline */
3291 if (str.data[str.len - 1] == '\n')
3292 str.data[--str.len] = '\0';
3295 (errmsg_internal("%s", title),
3296 errdetail("%s", str.data)));
3302 * on_proc_exit handler to log end of session
3305 log_disconnections(int code, Datum arg)
3307 Port *port = MyProcPort;
3309 int hours, minutes, seconds;
3311 char session_time[20];
3312 char uname[6+NAMEDATALEN];
3313 char dbname[10+NAMEDATALEN];
3314 char remote_host[7 + NI_MAXHOST];
3315 char remote_port[7 + NI_MAXSERV];
3317 snprintf(uname, sizeof(uname)," user=%s",port->user_name);
3318 snprintf(dbname, sizeof(dbname)," database=%s",port->database_name);
3319 snprintf(remote_host,sizeof(remote_host)," host=%s",
3321 snprintf(remote_port,sizeof(remote_port)," port=%s",port->remote_port);
3324 gettimeofday(&end,NULL);
3326 if (end.tv_usec < port->session_start.tv_usec)
3329 end.tv_usec += 1000000;
3331 end.tv_sec -= port->session_start.tv_sec;
3332 end.tv_usec -= port->session_start.tv_usec;
3334 hours = end.tv_sec / 3600;
3336 minutes = end.tv_sec / 60;
3337 seconds = end.tv_sec % 60;
3339 /* if time has gone backwards for some reason say so, or print time */
3342 snprintf(session_time,sizeof(session_time),"negative!");
3344 /* for stricter accuracy here we could round - this is close enough */
3345 snprintf(session_time, sizeof(session_time),
3346 "%d:%02d:%02d.%02d",
3347 hours, minutes, seconds, (int) (end.tv_usec/10000));
3351 (errmsg("disconnection: session time: %s%s%s%s%s",
3352 session_time,uname,dbname,remote_host,remote_port)));