Phase 2 pgindent run for v12.

[postgresql] / src / backend / access / transam / clog.c

/*-------------------------------------------------------------------------
 *
 * clog.c
 *              PostgreSQL transaction-commit-log manager
 *
 * This module replaces the old "pg_log" access code, which treated pg_log
 * essentially like a relation, in that it went through the regular buffer
 * manager.  The problem with that was that there wasn't any good way to
 * recycle storage space for transactions so old that they'll never be
 * looked up again.  Now we use specialized access code so that the commit
 * log can be broken into relatively small, independent segments.
 *
 * XLOG interactions: this module generates an XLOG record whenever a new
 * CLOG page is initialized to zeroes.  Other writes of CLOG come from
 * recording of transaction commit or abort in xact.c, which generates its
 * own XLOG records for these events and will re-perform the status update
 * on redo; so we need make no additional XLOG entry here.  For synchronous
 * transaction commits, the XLOG is guaranteed flushed through the XLOG commit
 * record before we are called to log a commit, so the WAL rule "write xlog
 * before data" is satisfied automatically.  However, for async commits we
 * must track the latest LSN affecting each CLOG page, so that we can flush
 * XLOG that far and satisfy the WAL rule.  We don't have to worry about this
 * for aborts (whether sync or async), since the post-crash assumption would
 * be that such transactions failed anyway.
 *
 * Portions Copyright (c) 1996-2019, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 * src/backend/access/transam/clog.c
 *
 *-------------------------------------------------------------------------
 */
#include "postgres.h"

#include "access/clog.h"
#include "access/slru.h"
#include "access/transam.h"
#include "access/xlog.h"
#include "access/xloginsert.h"
#include "access/xlogutils.h"
#include "miscadmin.h"
#include "pgstat.h"
#include "pg_trace.h"
#include "storage/proc.h"

/*
 * Defines for CLOG page sizes.  A page is the same BLCKSZ as is used
 * everywhere else in Postgres.
 *
 * Note: because TransactionIds are 32 bits and wrap around at 0xFFFFFFFF,
 * CLOG page numbering also wraps around at 0xFFFFFFFF/CLOG_XACTS_PER_PAGE,
 * and CLOG segment numbering at
 * 0xFFFFFFFF/CLOG_XACTS_PER_PAGE/SLRU_PAGES_PER_SEGMENT.  We need take no
 * explicit notice of that fact in this module, except when comparing segment
 * and page numbers in TruncateCLOG (see CLOGPagePrecedes).
 */

/* We need two bits per xact, so four xacts fit in a byte */
#define CLOG_BITS_PER_XACT      2
#define CLOG_XACTS_PER_BYTE 4
#define CLOG_XACTS_PER_PAGE (BLCKSZ * CLOG_XACTS_PER_BYTE)
#define CLOG_XACT_BITMASK       ((1 << CLOG_BITS_PER_XACT) - 1)

#define TransactionIdToPage(xid)        ((xid) / (TransactionId) CLOG_XACTS_PER_PAGE)
#define TransactionIdToPgIndex(xid) ((xid) % (TransactionId) CLOG_XACTS_PER_PAGE)
#define TransactionIdToByte(xid)        (TransactionIdToPgIndex(xid) / CLOG_XACTS_PER_BYTE)
#define TransactionIdToBIndex(xid)      ((xid) % (TransactionId) CLOG_XACTS_PER_BYTE)

/* We store the latest async LSN for each group of transactions */
#define CLOG_XACTS_PER_LSN_GROUP        32      /* keep this a power of 2 */
#define CLOG_LSNS_PER_PAGE      (CLOG_XACTS_PER_PAGE / CLOG_XACTS_PER_LSN_GROUP)

#define GetLSNIndex(slotno, xid)        ((slotno) * CLOG_LSNS_PER_PAGE + \
        ((xid) % (TransactionId) CLOG_XACTS_PER_PAGE) / CLOG_XACTS_PER_LSN_GROUP)

/*
 * The number of subtransactions below which we consider to apply clog group
 * update optimization.  Testing reveals that the number higher than this can
 * hurt performance.
 */
#define THRESHOLD_SUBTRANS_CLOG_OPT     5

/*
 * Link to shared-memory data structures for CLOG control
 */
static SlruCtlData ClogCtlData;

#define ClogCtl (&ClogCtlData)


static int      ZeroCLOGPage(int pageno, bool writeXlog);
static bool CLOGPagePrecedes(int page1, int page2);
static void WriteZeroPageXlogRec(int pageno);
static void WriteTruncateXlogRec(int pageno, TransactionId oldestXact,
                                                                 Oid oldestXidDb);
static void TransactionIdSetPageStatus(TransactionId xid, int nsubxids,
                                                                           TransactionId *subxids, XidStatus status,
                                                                           XLogRecPtr lsn, int pageno,
                                                                           bool all_xact_same_page);
static void TransactionIdSetStatusBit(TransactionId xid, XidStatus status,
                                                                          XLogRecPtr lsn, int slotno);
static void set_status_by_pages(int nsubxids, TransactionId *subxids,
                                                                XidStatus status, XLogRecPtr lsn);
static bool TransactionGroupUpdateXidStatus(TransactionId xid,
                                                                                        XidStatus status, XLogRecPtr lsn, int pageno);
static void TransactionIdSetPageStatusInternal(TransactionId xid, int nsubxids,
                                                                                           TransactionId *subxids, XidStatus status,
                                                                                           XLogRecPtr lsn, int pageno);


/*
 * TransactionIdSetTreeStatus
 *
 * Record the final state of transaction entries in the commit log for
 * a transaction and its subtransaction tree. Take care to ensure this is
 * efficient, and as atomic as possible.
 *
 * xid is a single xid to set status for. This will typically be
 * the top level transactionid for a top level commit or abort. It can
 * also be a subtransaction when we record transaction aborts.
 *
 * subxids is an array of xids of length nsubxids, representing subtransactions
 * in the tree of xid. In various cases nsubxids may be zero.
 *
 * lsn must be the WAL location of the commit record when recording an async
 * commit.  For a synchronous commit it can be InvalidXLogRecPtr, since the
 * caller guarantees the commit record is already flushed in that case.  It
 * should be InvalidXLogRecPtr for abort cases, too.
 *
 * In the commit case, atomicity is limited by whether all the subxids are in
 * the same CLOG page as xid.  If they all are, then the lock will be grabbed
 * only once, and the status will be set to committed directly.  Otherwise
 * we must
 *       1. set sub-committed all subxids that are not on the same page as the
 *              main xid
 *       2. atomically set committed the main xid and the subxids on the same page
 *       3. go over the first bunch again and set them committed
 * Note that as far as concurrent checkers are concerned, main transaction
 * commit as a whole is still atomic.
 *
 * Example:
 *              TransactionId t commits and has subxids t1, t2, t3, t4
 *              t is on page p1, t1 is also on p1, t2 and t3 are on p2, t4 is on p3
 *              1. update pages2-3:
 *                                      page2: set t2,t3 as sub-committed
 *                                      page3: set t4 as sub-committed
 *              2. update page1:
 *                                      set t1 as sub-committed,
 *                                      then set t as committed,
                                        then set t1 as committed
 *              3. update pages2-3:
 *                                      page2: set t2,t3 as committed
 *                                      page3: set t4 as committed
 *
 * NB: this is a low-level routine and is NOT the preferred entry point
 * for most uses; functions in transam.c are the intended callers.
 *
 * XXX Think about issuing FADVISE_WILLNEED on pages that we will need,
 * but aren't yet in cache, as well as hinting pages not to fall out of
 * cache yet.
 */
void
TransactionIdSetTreeStatus(TransactionId xid, int nsubxids,
                                                   TransactionId *subxids, XidStatus status, XLogRecPtr lsn)
{
        int                     pageno = TransactionIdToPage(xid);      /* get page of parent */
        int                     i;

        Assert(status == TRANSACTION_STATUS_COMMITTED ||
                   status == TRANSACTION_STATUS_ABORTED);

        /*
         * See how many subxids, if any, are on the same page as the parent, if
         * any.
         */
        for (i = 0; i < nsubxids; i++)
        {
                if (TransactionIdToPage(subxids[i]) != pageno)
                        break;
        }

        /*
         * Do all items fit on a single page?
         */
        if (i == nsubxids)
        {
                /*
                 * Set the parent and all subtransactions in a single call
                 */
                TransactionIdSetPageStatus(xid, nsubxids, subxids, status, lsn,
                                                                   pageno, true);
        }
        else
        {
                int                     nsubxids_on_first_page = i;

                /*
                 * If this is a commit then we care about doing this correctly (i.e.
                 * using the subcommitted intermediate status).  By here, we know
                 * we're updating more than one page of clog, so we must mark entries
                 * that are *not* on the first page so that they show as subcommitted
                 * before we then return to update the status to fully committed.
                 *
                 * To avoid touching the first page twice, skip marking subcommitted
                 * for the subxids on that first page.
                 */
                if (status == TRANSACTION_STATUS_COMMITTED)
                        set_status_by_pages(nsubxids - nsubxids_on_first_page,
                                                                subxids + nsubxids_on_first_page,
                                                                TRANSACTION_STATUS_SUB_COMMITTED, lsn);

                /*
                 * Now set the parent and subtransactions on same page as the parent,
                 * if any
                 */
                pageno = TransactionIdToPage(xid);
                TransactionIdSetPageStatus(xid, nsubxids_on_first_page, subxids, status,
                                                                   lsn, pageno, false);

                /*
                 * Now work through the rest of the subxids one clog page at a time,
                 * starting from the second page onwards, like we did above.
                 */
                set_status_by_pages(nsubxids - nsubxids_on_first_page,
                                                        subxids + nsubxids_on_first_page,
                                                        status, lsn);
        }
}

/*
 * Helper for TransactionIdSetTreeStatus: set the status for a bunch of
 * transactions, chunking in the separate CLOG pages involved. We never
 * pass the whole transaction tree to this function, only subtransactions
 * that are on different pages to the top level transaction id.
 */
static void
set_status_by_pages(int nsubxids, TransactionId *subxids,
                                        XidStatus status, XLogRecPtr lsn)
{
        int                     pageno = TransactionIdToPage(subxids[0]);
        int                     offset = 0;
        int                     i = 0;

        Assert(nsubxids > 0);           /* else the pageno fetch above is unsafe */

        while (i < nsubxids)
        {
                int                     num_on_page = 0;
                int                     nextpageno;

                do
                {
                        nextpageno = TransactionIdToPage(subxids[i]);
                        if (nextpageno != pageno)
                                break;
                        num_on_page++;
                        i++;
                } while (i < nsubxids);

                TransactionIdSetPageStatus(InvalidTransactionId,
                                                                   num_on_page, subxids + offset,
                                                                   status, lsn, pageno, false);
                offset = i;
                pageno = nextpageno;
        }
}

/*
 * Record the final state of transaction entries in the commit log for all
 * entries on a single page.  Atomic only on this page.
 */
static void
TransactionIdSetPageStatus(TransactionId xid, int nsubxids,
                                                   TransactionId *subxids, XidStatus status,
                                                   XLogRecPtr lsn, int pageno,
                                                   bool all_xact_same_page)
{
        /* Can't use group update when PGPROC overflows. */
        StaticAssertStmt(THRESHOLD_SUBTRANS_CLOG_OPT <= PGPROC_MAX_CACHED_SUBXIDS,
                                         "group clog threshold less than PGPROC cached subxids");

        /*
         * When there is contention on CLogControlLock, we try to group multiple
         * updates; a single leader process will perform transaction status
         * updates for multiple backends so that the number of times
         * CLogControlLock needs to be acquired is reduced.
         *
         * For this optimization to be safe, the XID in MyPgXact and the subxids
         * in MyProc must be the same as the ones for which we're setting the
         * status.  Check that this is the case.
         *
         * For this optimization to be efficient, we shouldn't have too many
         * sub-XIDs and all of the XIDs for which we're adjusting clog should be
         * on the same page.  Check those conditions, too.
         */
        if (all_xact_same_page && xid == MyPgXact->xid &&
                nsubxids <= THRESHOLD_SUBTRANS_CLOG_OPT &&
                nsubxids == MyPgXact->nxids &&
                memcmp(subxids, MyProc->subxids.xids,
                           nsubxids * sizeof(TransactionId)) == 0)
        {
                /*
                 * We don't try to do group update optimization if a process has
                 * overflowed the subxids array in its PGPROC, since in that case we
                 * don't have a complete list of XIDs for it.
                 */
                Assert(THRESHOLD_SUBTRANS_CLOG_OPT <= PGPROC_MAX_CACHED_SUBXIDS);

                /*
                 * If we can immediately acquire CLogControlLock, we update the status
                 * of our own XID and release the lock.  If not, try use group XID
                 * update.  If that doesn't work out, fall back to waiting for the
                 * lock to perform an update for this transaction only.
                 */
                if (LWLockConditionalAcquire(CLogControlLock, LW_EXCLUSIVE))
                {
                        /* Got the lock without waiting!  Do the update. */
                        TransactionIdSetPageStatusInternal(xid, nsubxids, subxids, status,
                                                                                           lsn, pageno);
                        LWLockRelease(CLogControlLock);
                        return;
                }
                else if (TransactionGroupUpdateXidStatus(xid, status, lsn, pageno))
                {
                        /* Group update mechanism has done the work. */
                        return;
                }

                /* Fall through only if update isn't done yet. */
        }

        /* Group update not applicable, or couldn't accept this page number. */
        LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);
        TransactionIdSetPageStatusInternal(xid, nsubxids, subxids, status,
                                                                           lsn, pageno);
        LWLockRelease(CLogControlLock);
}

/*
 * Record the final state of transaction entry in the commit log
 *
 * We don't do any locking here; caller must handle that.
 */
static void
TransactionIdSetPageStatusInternal(TransactionId xid, int nsubxids,
                                                                   TransactionId *subxids, XidStatus status,
                                                                   XLogRecPtr lsn, int pageno)
{
        int                     slotno;
        int                     i;

        Assert(status == TRANSACTION_STATUS_COMMITTED ||
                   status == TRANSACTION_STATUS_ABORTED ||
                   (status == TRANSACTION_STATUS_SUB_COMMITTED && !TransactionIdIsValid(xid)));
        Assert(LWLockHeldByMeInMode(CLogControlLock, LW_EXCLUSIVE));

        /*
         * If we're doing an async commit (ie, lsn is valid), then we must wait
         * for any active write on the page slot to complete.  Otherwise our
         * update could reach disk in that write, which will not do since we
         * mustn't let it reach disk until we've done the appropriate WAL flush.
         * But when lsn is invalid, it's OK to scribble on a page while it is
         * write-busy, since we don't care if the update reaches disk sooner than
         * we think.
         */
        slotno = SimpleLruReadPage(ClogCtl, pageno, XLogRecPtrIsInvalid(lsn), xid);

        /*
         * Set the main transaction id, if any.
         *
         * If we update more than one xid on this page while it is being written
         * out, we might find that some of the bits go to disk and others don't.
         * If we are updating commits on the page with the top-level xid that
         * could break atomicity, so we subcommit the subxids first before we mark
         * the top-level commit.
         */
        if (TransactionIdIsValid(xid))
        {
                /* Subtransactions first, if needed ... */
                if (status == TRANSACTION_STATUS_COMMITTED)
                {
                        for (i = 0; i < nsubxids; i++)
                        {
                                Assert(ClogCtl->shared->page_number[slotno] == TransactionIdToPage(subxids[i]));
                                TransactionIdSetStatusBit(subxids[i],
                                                                                  TRANSACTION_STATUS_SUB_COMMITTED,
                                                                                  lsn, slotno);
                        }
                }

                /* ... then the main transaction */
                TransactionIdSetStatusBit(xid, status, lsn, slotno);
        }

        /* Set the subtransactions */
        for (i = 0; i < nsubxids; i++)
        {
                Assert(ClogCtl->shared->page_number[slotno] == TransactionIdToPage(subxids[i]));
                TransactionIdSetStatusBit(subxids[i], status, lsn, slotno);
        }

        ClogCtl->shared->page_dirty[slotno] = true;
}

/*
 * When we cannot immediately acquire CLogControlLock in exclusive mode at
 * commit time, add ourselves to a list of processes that need their XIDs
 * status update.  The first process to add itself to the list will acquire
 * CLogControlLock in exclusive mode and set transaction status as required
 * on behalf of all group members.  This avoids a great deal of contention
 * around CLogControlLock when many processes are trying to commit at once,
 * since the lock need not be repeatedly handed off from one committing
 * process to the next.
 *
 * Returns true when transaction status has been updated in clog; returns
 * false if we decided against applying the optimization because the page
 * number we need to update differs from those processes already waiting.
 */
static bool
TransactionGroupUpdateXidStatus(TransactionId xid, XidStatus status,
                                                                XLogRecPtr lsn, int pageno)
{
        volatile PROC_HDR *procglobal = ProcGlobal;
        PGPROC     *proc = MyProc;
        uint32          nextidx;
        uint32          wakeidx;

        /* We should definitely have an XID whose status needs to be updated. */
        Assert(TransactionIdIsValid(xid));

        /*
         * Add ourselves to the list of processes needing a group XID status
         * update.
         */
        proc->clogGroupMember = true;
        proc->clogGroupMemberXid = xid;
        proc->clogGroupMemberXidStatus = status;
        proc->clogGroupMemberPage = pageno;
        proc->clogGroupMemberLsn = lsn;

        nextidx = pg_atomic_read_u32(&procglobal->clogGroupFirst);

        while (true)
        {
                /*
                 * Add the proc to list, if the clog page where we need to update the
                 * current transaction status is same as group leader's clog page.
                 *
                 * There is a race condition here, which is that after doing the below
                 * check and before adding this proc's clog update to a group, the
                 * group leader might have already finished the group update for this
                 * page and becomes group leader of another group. This will lead to a
                 * situation where a single group can have different clog page
                 * updates.  This isn't likely and will still work, just maybe a bit
                 * less efficiently.
                 */
                if (nextidx != INVALID_PGPROCNO &&
                        ProcGlobal->allProcs[nextidx].clogGroupMemberPage != proc->clogGroupMemberPage)
                {
                        proc->clogGroupMember = false;
                        return false;
                }

                pg_atomic_write_u32(&proc->clogGroupNext, nextidx);

                if (pg_atomic_compare_exchange_u32(&procglobal->clogGroupFirst,
                                                                                   &nextidx,
                                                                                   (uint32) proc->pgprocno))
                        break;
        }

        /*
         * If the list was not empty, the leader will update the status of our
         * XID. It is impossible to have followers without a leader because the
         * first process that has added itself to the list will always have
         * nextidx as INVALID_PGPROCNO.
         */
        if (nextidx != INVALID_PGPROCNO)
        {
                int                     extraWaits = 0;

                /* Sleep until the leader updates our XID status. */
                pgstat_report_wait_start(WAIT_EVENT_CLOG_GROUP_UPDATE);
                for (;;)
                {
                        /* acts as a read barrier */
                        PGSemaphoreLock(proc->sem);
                        if (!proc->clogGroupMember)
                                break;
                        extraWaits++;
                }
                pgstat_report_wait_end();

                Assert(pg_atomic_read_u32(&proc->clogGroupNext) == INVALID_PGPROCNO);

                /* Fix semaphore count for any absorbed wakeups */
                while (extraWaits-- > 0)
                        PGSemaphoreUnlock(proc->sem);
                return true;
        }

        /* We are the leader.  Acquire the lock on behalf of everyone. */
        LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);

        /*
         * Now that we've got the lock, clear the list of processes waiting for
         * group XID status update, saving a pointer to the head of the list.
         * Trying to pop elements one at a time could lead to an ABA problem.
         */
        nextidx = pg_atomic_exchange_u32(&procglobal->clogGroupFirst,
                                                                         INVALID_PGPROCNO);

        /* Remember head of list so we can perform wakeups after dropping lock. */
        wakeidx = nextidx;

        /* Walk the list and update the status of all XIDs. */
        while (nextidx != INVALID_PGPROCNO)
        {
                PGPROC     *proc = &ProcGlobal->allProcs[nextidx];
                PGXACT     *pgxact = &ProcGlobal->allPgXact[nextidx];

                /*
                 * Overflowed transactions should not use group XID status update
                 * mechanism.
                 */
                Assert(!pgxact->overflowed);

                TransactionIdSetPageStatusInternal(proc->clogGroupMemberXid,
                                                                                   pgxact->nxids,
                                                                                   proc->subxids.xids,
                                                                                   proc->clogGroupMemberXidStatus,
                                                                                   proc->clogGroupMemberLsn,
                                                                                   proc->clogGroupMemberPage);

                /* Move to next proc in list. */
                nextidx = pg_atomic_read_u32(&proc->clogGroupNext);
        }

        /* We're done with the lock now. */
        LWLockRelease(CLogControlLock);

        /*
         * Now that we've released the lock, go back and wake everybody up.  We
         * don't do this under the lock so as to keep lock hold times to a
         * minimum.
         */
        while (wakeidx != INVALID_PGPROCNO)
        {
                PGPROC     *proc = &ProcGlobal->allProcs[wakeidx];

                wakeidx = pg_atomic_read_u32(&proc->clogGroupNext);
                pg_atomic_write_u32(&proc->clogGroupNext, INVALID_PGPROCNO);

                /* ensure all previous writes are visible before follower continues. */
                pg_write_barrier();

                proc->clogGroupMember = false;

                if (proc != MyProc)
                        PGSemaphoreUnlock(proc->sem);
        }

        return true;
}

/*
 * Sets the commit status of a single transaction.
 *
 * Must be called with CLogControlLock held
 */
static void
TransactionIdSetStatusBit(TransactionId xid, XidStatus status, XLogRecPtr lsn, int slotno)
{
        int                     byteno = TransactionIdToByte(xid);
        int                     bshift = TransactionIdToBIndex(xid) * CLOG_BITS_PER_XACT;
        char       *byteptr;
        char            byteval;
        char            curval;

        byteptr = ClogCtl->shared->page_buffer[slotno] + byteno;
        curval = (*byteptr >> bshift) & CLOG_XACT_BITMASK;

        /*
         * When replaying transactions during recovery we still need to perform
         * the two phases of subcommit and then commit. However, some transactions
         * are already correctly marked, so we just treat those as a no-op which
         * allows us to keep the following Assert as restrictive as possible.
         */
        if (InRecovery && status == TRANSACTION_STATUS_SUB_COMMITTED &&
                curval == TRANSACTION_STATUS_COMMITTED)
                return;

        /*
         * Current state change should be from 0 or subcommitted to target state
         * or we should already be there when replaying changes during recovery.
         */
        Assert(curval == 0 ||
                   (curval == TRANSACTION_STATUS_SUB_COMMITTED &&
                        status != TRANSACTION_STATUS_IN_PROGRESS) ||
                   curval == status);

        /* note this assumes exclusive access to the clog page */
        byteval = *byteptr;
        byteval &= ~(((1 << CLOG_BITS_PER_XACT) - 1) << bshift);
        byteval |= (status << bshift);
        *byteptr = byteval;

        /*
         * Update the group LSN if the transaction completion LSN is higher.
         *
         * Note: lsn will be invalid when supplied during InRecovery processing,
         * so we don't need to do anything special to avoid LSN updates during
         * recovery. After recovery completes the next clog change will set the
         * LSN correctly.
         */
        if (!XLogRecPtrIsInvalid(lsn))
        {
                int                     lsnindex = GetLSNIndex(slotno, xid);

                if (ClogCtl->shared->group_lsn[lsnindex] < lsn)
                        ClogCtl->shared->group_lsn[lsnindex] = lsn;
        }
}

/*
 * Interrogate the state of a transaction in the commit log.
 *
 * Aside from the actual commit status, this function returns (into *lsn)
 * an LSN that is late enough to be able to guarantee that if we flush up to
 * that LSN then we will have flushed the transaction's commit record to disk.
 * The result is not necessarily the exact LSN of the transaction's commit
 * record!      For example, for long-past transactions (those whose clog pages
 * already migrated to disk), we'll return InvalidXLogRecPtr.  Also, because
 * we group transactions on the same clog page to conserve storage, we might
 * return the LSN of a later transaction that falls into the same group.
 *
 * NB: this is a low-level routine and is NOT the preferred entry point
 * for most uses; TransactionLogFetch() in transam.c is the intended caller.
 */
XidStatus
TransactionIdGetStatus(TransactionId xid, XLogRecPtr *lsn)
{
        int                     pageno = TransactionIdToPage(xid);
        int                     byteno = TransactionIdToByte(xid);
        int                     bshift = TransactionIdToBIndex(xid) * CLOG_BITS_PER_XACT;
        int                     slotno;
        int                     lsnindex;
        char       *byteptr;
        XidStatus       status;

        /* lock is acquired by SimpleLruReadPage_ReadOnly */

        slotno = SimpleLruReadPage_ReadOnly(ClogCtl, pageno, xid);
        byteptr = ClogCtl->shared->page_buffer[slotno] + byteno;

        status = (*byteptr >> bshift) & CLOG_XACT_BITMASK;

        lsnindex = GetLSNIndex(slotno, xid);
        *lsn = ClogCtl->shared->group_lsn[lsnindex];

        LWLockRelease(CLogControlLock);

        return status;
}

/*
 * Number of shared CLOG buffers.
 *
 * On larger multi-processor systems, it is possible to have many CLOG page
 * requests in flight at one time which could lead to disk access for CLOG
 * page if the required page is not found in memory.  Testing revealed that we
 * can get the best performance by having 128 CLOG buffers, more than that it
 * doesn't improve performance.
 *
 * Unconditionally keeping the number of CLOG buffers to 128 did not seem like
 * a good idea, because it would increase the minimum amount of shared memory
 * required to start, which could be a problem for people running very small
 * configurations.  The following formula seems to represent a reasonable
 * compromise: people with very low values for shared_buffers will get fewer
 * CLOG buffers as well, and everyone else will get 128.
 */
Size
CLOGShmemBuffers(void)
{
        return Min(128, Max(4, NBuffers / 512));
}

/*
 * Initialization of shared memory for CLOG
 */
Size
CLOGShmemSize(void)
{
        return SimpleLruShmemSize(CLOGShmemBuffers(), CLOG_LSNS_PER_PAGE);
}

void
CLOGShmemInit(void)
{
        ClogCtl->PagePrecedes = CLOGPagePrecedes;
        SimpleLruInit(ClogCtl, "clog", CLOGShmemBuffers(), CLOG_LSNS_PER_PAGE,
                                  CLogControlLock, "pg_xact", LWTRANCHE_CLOG_BUFFERS);
}

/*
 * This func must be called ONCE on system install.  It creates
 * the initial CLOG segment.  (The CLOG directory is assumed to
 * have been created by initdb, and CLOGShmemInit must have been
 * called already.)
 */
void
BootStrapCLOG(void)
{
        int                     slotno;

        LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);

        /* Create and zero the first page of the commit log */
        slotno = ZeroCLOGPage(0, false);

        /* Make sure it's written out */
        SimpleLruWritePage(ClogCtl, slotno);
        Assert(!ClogCtl->shared->page_dirty[slotno]);

        LWLockRelease(CLogControlLock);
}

/*
 * Initialize (or reinitialize) a page of CLOG to zeroes.
 * If writeXlog is true, also emit an XLOG record saying we did this.
 *
 * The page is not actually written, just set up in shared memory.
 * The slot number of the new page is returned.
 *
 * Control lock must be held at entry, and will be held at exit.
 */
static int
ZeroCLOGPage(int pageno, bool writeXlog)
{
        int                     slotno;

        slotno = SimpleLruZeroPage(ClogCtl, pageno);

        if (writeXlog)
                WriteZeroPageXlogRec(pageno);

        return slotno;
}

/*
 * This must be called ONCE during postmaster or standalone-backend startup,
 * after StartupXLOG has initialized ShmemVariableCache->nextFullXid.
 */
void
StartupCLOG(void)
{
        TransactionId xid = XidFromFullTransactionId(ShmemVariableCache->nextFullXid);
        int                     pageno = TransactionIdToPage(xid);

        LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);

        /*
         * Initialize our idea of the latest page number.
         */
        ClogCtl->shared->latest_page_number = pageno;

        LWLockRelease(CLogControlLock);
}

/*
 * This must be called ONCE at the end of startup/recovery.
 */
void
TrimCLOG(void)
{
        TransactionId xid = XidFromFullTransactionId(ShmemVariableCache->nextFullXid);
        int                     pageno = TransactionIdToPage(xid);

        LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);

        /*
         * Re-Initialize our idea of the latest page number.
         */
        ClogCtl->shared->latest_page_number = pageno;

        /*
         * Zero out the remainder of the current clog page.  Under normal
         * circumstances it should be zeroes already, but it seems at least
         * theoretically possible that XLOG replay will have settled on a nextXID
         * value that is less than the last XID actually used and marked by the
         * previous database lifecycle (since subtransaction commit writes clog
         * but makes no WAL entry).  Let's just be safe. (We need not worry about
         * pages beyond the current one, since those will be zeroed when first
         * used.  For the same reason, there is no need to do anything when
         * nextFullXid is exactly at a page boundary; and it's likely that the
         * "current" page doesn't exist yet in that case.)
         */
        if (TransactionIdToPgIndex(xid) != 0)
        {
                int                     byteno = TransactionIdToByte(xid);
                int                     bshift = TransactionIdToBIndex(xid) * CLOG_BITS_PER_XACT;
                int                     slotno;
                char       *byteptr;

                slotno = SimpleLruReadPage(ClogCtl, pageno, false, xid);
                byteptr = ClogCtl->shared->page_buffer[slotno] + byteno;

                /* Zero so-far-unused positions in the current byte */
                *byteptr &= (1 << bshift) - 1;
                /* Zero the rest of the page */
                MemSet(byteptr + 1, 0, BLCKSZ - byteno - 1);

                ClogCtl->shared->page_dirty[slotno] = true;
        }

        LWLockRelease(CLogControlLock);
}

/*
 * This must be called ONCE during postmaster or standalone-backend shutdown
 */
void
ShutdownCLOG(void)
{
        /* Flush dirty CLOG pages to disk */
        TRACE_POSTGRESQL_CLOG_CHECKPOINT_START(false);
        SimpleLruFlush(ClogCtl, false);

        /*
         * fsync pg_xact to ensure that any files flushed previously are durably
         * on disk.
         */
        fsync_fname("pg_xact", true);

        TRACE_POSTGRESQL_CLOG_CHECKPOINT_DONE(false);
}

/*
 * Perform a checkpoint --- either during shutdown, or on-the-fly
 */
void
CheckPointCLOG(void)
{
        /* Flush dirty CLOG pages to disk */
        TRACE_POSTGRESQL_CLOG_CHECKPOINT_START(true);
        SimpleLruFlush(ClogCtl, true);

        /*
         * fsync pg_xact to ensure that any files flushed previously are durably
         * on disk.
         */
        fsync_fname("pg_xact", true);

        TRACE_POSTGRESQL_CLOG_CHECKPOINT_DONE(true);
}


/*
 * Make sure that CLOG has room for a newly-allocated XID.
 *
 * NB: this is called while holding XidGenLock.  We want it to be very fast
 * most of the time; even when it's not so fast, no actual I/O need happen
 * unless we're forced to write out a dirty clog or xlog page to make room
 * in shared memory.
 */
void
ExtendCLOG(TransactionId newestXact)
{
        int                     pageno;

        /*
         * No work except at first XID of a page.  But beware: just after
         * wraparound, the first XID of page zero is FirstNormalTransactionId.
         */
        if (TransactionIdToPgIndex(newestXact) != 0 &&
                !TransactionIdEquals(newestXact, FirstNormalTransactionId))
                return;

        pageno = TransactionIdToPage(newestXact);

        LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);

        /* Zero the page and make an XLOG entry about it */
        ZeroCLOGPage(pageno, true);

        LWLockRelease(CLogControlLock);
}


/*
 * Remove all CLOG segments before the one holding the passed transaction ID
 *
 * Before removing any CLOG data, we must flush XLOG to disk, to ensure
 * that any recently-emitted HEAP_FREEZE records have reached disk; otherwise
 * a crash and restart might leave us with some unfrozen tuples referencing
 * removed CLOG data.  We choose to emit a special TRUNCATE XLOG record too.
 * Replaying the deletion from XLOG is not critical, since the files could
 * just as well be removed later, but doing so prevents a long-running hot
 * standby server from acquiring an unreasonably bloated CLOG directory.
 *
 * Since CLOG segments hold a large number of transactions, the opportunity to
 * actually remove a segment is fairly rare, and so it seems best not to do
 * the XLOG flush unless we have confirmed that there is a removable segment.
 */
void
TruncateCLOG(TransactionId oldestXact, Oid oldestxid_datoid)
{
        int                     cutoffPage;

        /*
         * The cutoff point is the start of the segment containing oldestXact. We
         * pass the *page* containing oldestXact to SimpleLruTruncate.
         */
        cutoffPage = TransactionIdToPage(oldestXact);

        /* Check to see if there's any files that could be removed */
        if (!SlruScanDirectory(ClogCtl, SlruScanDirCbReportPresence, &cutoffPage))
                return;                                 /* nothing to remove */

        /*
         * Advance oldestClogXid before truncating clog, so concurrent xact status
         * lookups can ensure they don't attempt to access truncated-away clog.
         *
         * It's only necessary to do this if we will actually truncate away clog
         * pages.
         */
        AdvanceOldestClogXid(oldestXact);

        /*
         * Write XLOG record and flush XLOG to disk. We record the oldest xid
         * we're keeping information about here so we can ensure that it's always
         * ahead of clog truncation in case we crash, and so a standby finds out
         * the new valid xid before the next checkpoint.
         */
        WriteTruncateXlogRec(cutoffPage, oldestXact, oldestxid_datoid);

        /* Now we can remove the old CLOG segment(s) */
        SimpleLruTruncate(ClogCtl, cutoffPage);
}


/*
 * Decide which of two CLOG page numbers is "older" for truncation purposes.
 *
 * We need to use comparison of TransactionIds here in order to do the right
 * thing with wraparound XID arithmetic.  However, if we are asked about
 * page number zero, we don't want to hand InvalidTransactionId to
 * TransactionIdPrecedes: it'll get weird about permanent xact IDs.  So,
 * offset both xids by FirstNormalTransactionId to avoid that.
 */
static bool
CLOGPagePrecedes(int page1, int page2)
{
        TransactionId xid1;
        TransactionId xid2;

        xid1 = ((TransactionId) page1) * CLOG_XACTS_PER_PAGE;
        xid1 += FirstNormalTransactionId;
        xid2 = ((TransactionId) page2) * CLOG_XACTS_PER_PAGE;
        xid2 += FirstNormalTransactionId;

        return TransactionIdPrecedes(xid1, xid2);
}


/*
 * Write a ZEROPAGE xlog record
 */
static void
WriteZeroPageXlogRec(int pageno)
{
        XLogBeginInsert();
        XLogRegisterData((char *) (&pageno), sizeof(int));
        (void) XLogInsert(RM_CLOG_ID, CLOG_ZEROPAGE);
}

/*
 * Write a TRUNCATE xlog record
 *
 * We must flush the xlog record to disk before returning --- see notes
 * in TruncateCLOG().
 */
static void
WriteTruncateXlogRec(int pageno, TransactionId oldestXact, Oid oldestXactDb)
{
        XLogRecPtr      recptr;
        xl_clog_truncate xlrec;

        xlrec.pageno = pageno;
        xlrec.oldestXact = oldestXact;
        xlrec.oldestXactDb = oldestXactDb;

        XLogBeginInsert();
        XLogRegisterData((char *) (&xlrec), sizeof(xl_clog_truncate));
        recptr = XLogInsert(RM_CLOG_ID, CLOG_TRUNCATE);
        XLogFlush(recptr);
}

/*
 * CLOG resource manager's routines
 */
void
clog_redo(XLogReaderState *record)
{
        uint8           info = XLogRecGetInfo(record) & ~XLR_INFO_MASK;

        /* Backup blocks are not used in clog records */
        Assert(!XLogRecHasAnyBlockRefs(record));

        if (info == CLOG_ZEROPAGE)
        {
                int                     pageno;
                int                     slotno;

                memcpy(&pageno, XLogRecGetData(record), sizeof(int));

                LWLockAcquire(CLogControlLock, LW_EXCLUSIVE);

                slotno = ZeroCLOGPage(pageno, false);
                SimpleLruWritePage(ClogCtl, slotno);
                Assert(!ClogCtl->shared->page_dirty[slotno]);

                LWLockRelease(CLogControlLock);
        }
        else if (info == CLOG_TRUNCATE)
        {
                xl_clog_truncate xlrec;

                memcpy(&xlrec, XLogRecGetData(record), sizeof(xl_clog_truncate));

                /*
                 * During XLOG replay, latest_page_number isn't set up yet; insert a
                 * suitable value to bypass the sanity test in SimpleLruTruncate.
                 */
                ClogCtl->shared->latest_page_number = xlrec.pageno;

                AdvanceOldestClogXid(xlrec.oldestXact);

                SimpleLruTruncate(ClogCtl, xlrec.pageno);
        }
        else
                elog(PANIC, "clog_redo: unknown op code %u", info);
}