2 # $PostgreSQL: pgsql/src/Makefile.global.in,v 1.234 2007/04/13 18:50:01 adunstan Exp $
4 #------------------------------------------------------------------------------
5 # All PostgreSQL makefiles include this file and use the variables it sets,
6 # which in turn are put here by the configure script. There is no need for
7 # users to edit this file -- if it turns out to be necessary then that's a
10 # A makefile that includes this file needs to set the variable `subdir' to
11 # the relative path from the top to itself and `top_builddir' to the relative
12 # path from itself to the top before including this file. (The "top" is the
13 # parent directory of the directory this file is in.)
14 #------------------------------------------------------------------------------
17 ##########################################################################
21 .PHONY: all install install-strip installdirs uninstall clean distclean maintainer-clean distprep check installcheck maintainer-check
24 # make `all' the default target
27 # Delete target files if the command fails after it has
28 # started to update the file.
31 # PostgreSQL version number
32 VERSION = @PACKAGE_VERSION@
34 # Support for VPATH builds
35 vpath_build = @vpath_build@
36 abs_top_srcdir = @abs_top_srcdir@
38 ifneq ($(vpath_build),yes)
39 top_srcdir = $(top_builddir)
41 else # vpath_build = yes
42 top_srcdir = $(abs_top_srcdir)
43 srcdir = $(top_srcdir)/$(subdir)
47 # Saved arguments from configure
48 configure_args = @configure_args@
51 ##########################################################################
53 # Installation directories
55 # These are set by the equivalent --xxxdir configure options. We
56 # append "postgresql" to some of them, if the string does not already
57 # contain "pgsql" or "postgres", in order to avoid directory clutter.
59 # In a PGXS build, we cannot use the values inserted into Makefile.global
60 # by configure, since the installation tree may have been relocated.
61 # Instead get the path values from pg_config.
65 # Note that prefix and exec_prefix aren't defined in a PGXS build;
66 # makefiles may only use the derived variables such as bindir.
69 exec_prefix := @exec_prefix@
74 ifeq "$(findstring pgsql, $(datadir))" ""
75 ifeq "$(findstring postgres, $(datadir))" ""
76 override datadir := $(datadir)/postgresql
80 sysconfdir := @sysconfdir@
81 ifeq "$(findstring pgsql, $(sysconfdir))" ""
82 ifeq "$(findstring postgres, $(sysconfdir))" ""
83 override sysconfdir := $(sysconfdir)/postgresql
90 ifeq "$(findstring pgsql, $(pkglibdir))" ""
91 ifeq "$(findstring postgres, $(pkglibdir))" ""
92 override pkglibdir := $(pkglibdir)/postgresql
96 includedir := @includedir@
98 pkgincludedir = $(includedir)
99 ifeq "$(findstring pgsql, $(pkgincludedir))" ""
100 ifeq "$(findstring postgres, $(pkgincludedir))" ""
101 override pkgincludedir := $(pkgincludedir)/postgresql
108 # docdir can be an empty string to signify --without-docdir
110 ifeq "$(findstring pgsql, $(docdir))" ""
111 ifeq "$(findstring postgres, $(docdir))" ""
112 override docdir := $(docdir)/postgresql
117 localedir := @localedir@
121 PG_CONFIG = pg_config
123 bindir := $(shell $(PG_CONFIG) --bindir)
124 datadir := $(shell $(PG_CONFIG) --sharedir)
125 sysconfdir := $(shell $(PG_CONFIG) --sysconfdir)
126 libdir := $(shell $(PG_CONFIG) --libdir)
127 pkglibdir := $(shell $(PG_CONFIG) --pkglibdir)
128 includedir := $(shell $(PG_CONFIG) --includedir)
129 pkgincludedir := $(shell $(PG_CONFIG) --pkgincludedir)
130 mandir := $(shell $(PG_CONFIG) --mandir)
131 docdir := $(shell $(PG_CONFIG) --docdir)
132 localedir := $(shell $(PG_CONFIG) --localedir)
136 # These derived path variables aren't separately configurable.
138 includedir_server = $(pkgincludedir)/server
139 includedir_internal = $(pkgincludedir)/internal
140 pgxsdir = $(pkglibdir)/pgxs
145 ##########################################################################
149 # Records the choice of the various --enable-xxx and --with-xxx options.
151 with_perl = @with_perl@
152 with_python = @with_python@
153 with_tcl = @with_tcl@
154 with_openssl = @with_openssl@
155 with_libxml = @with_libxml@
156 with_zlib = @with_zlib@
157 enable_shared = @enable_shared@
158 enable_rpath = @enable_rpath@
159 enable_nls = @enable_nls@
160 enable_debug = @enable_debug@
161 enable_dtrace = @enable_dtrace@
162 enable_thread_safety = @enable_thread_safety@
164 python_includespec = @python_includespec@
165 python_libdir = @python_libdir@
166 python_libspec = @python_libspec@
167 python_additional_libs = @python_additional_libs@
168 python_configdir = @python_configdir@
169 python_version = @python_version@
171 krb_srvtab = @krb_srvtab@
174 TCL_LIB_FILE = @TCL_LIB_FILE@
175 TCL_LIBS = @TCL_LIBS@
176 TCL_LIB_SPEC = @TCL_LIB_SPEC@
177 TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@
178 TCL_SHARED_BUILD = @TCL_SHARED_BUILD@
179 TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@
181 PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
182 PTHREAD_LIBS = @PTHREAD_LIBS@
184 have_docbook = @have_docbook@
185 DOCBOOKSTYLE = @DOCBOOKSTYLE@
186 COLLATEINDEX = @COLLATEINDEX@
189 ##########################################################################
196 CPPFLAGS = @CPPFLAGS@
199 override CPPFLAGS := -I$(includedir_server) -I$(includedir_internal) $(CPPFLAGS)
201 override CPPFLAGS := -I$(top_srcdir)/src/include $(CPPFLAGS)
203 override CPPFLAGS := -I$(top_builddir)/src/include $(CPPFLAGS)
216 FLEXFLAGS = @FLEXFLAGS@ $(LFLAGS)
218 DTRACEFLAGS = @DTRACEFLAGS@
223 LDAP_LIBS_FE = @LDAP_LIBS_FE@
224 LDAP_LIBS_BE = @LDAP_LIBS_BE@
226 with_gnu_ld = @with_gnu_ld@
227 ld_R_works = @ld_R_works@
229 LDFLAGS_SL = @LDFLAGS_SL@
237 # quoted for pathname with spaces
239 perl_archlibexp = @perl_archlibexp@
240 perl_privlibexp = @perl_privlibexp@
241 perl_useshrplib = @perl_useshrplib@
242 perl_embed_ldflags = @perl_embed_ldflags@
249 MSGMERGE = @MSGMERGE@
252 XGETTEXT = @XGETTEXT@
257 PL_TESTDB = pl_regression
258 CONTRIB_TESTDB = contrib_regression
262 INSTALL = $(SHELL) $(top_srcdir)/config/install-sh -c
264 INSTALL_SCRIPT_MODE = 755
265 INSTALL_DATA_MODE = 644
266 INSTALL_PROGRAM = $(INSTALL_PROGRAM_ENV) $(INSTALL) $(INSTALL_STRIP_FLAG)
267 INSTALL_SCRIPT = $(INSTALL) -m $(INSTALL_SCRIPT_MODE)
268 INSTALL_DATA = $(INSTALL) -m $(INSTALL_DATA_MODE)
269 INSTALL_STLIB = $(INSTALL_STLIB_ENV) $(INSTALL_DATA) $(INSTALL_STRIP_FLAG)
270 INSTALL_SHLIB = $(INSTALL_SHLIB_ENV) $(INSTALL) $(INSTALL_SHLIB_OPTS) $(INSTALL_STRIP_FLAG)
271 # Override in Makefile.port if necessary
272 INSTALL_SHLIB_OPTS = -m 755
274 mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
275 missing = $(SHELL) $(top_srcdir)/config/missing
278 STRIP_STATIC_LIB = @STRIP_STATIC_LIB@
279 STRIP_SHARED_LIB = @STRIP_SHARED_LIB@
289 DEF_PGPORT = @default_port@
290 WANTED_LANGUAGES = @WANTED_LANGUAGES@
293 ##########################################################################
295 # Additional platform-specific settings
298 # Name of the "template"
303 host_cpu = @host_cpu@
305 # Make HAVE_IPV6 available for initdb script creation
306 HAVE_IPV6= @HAVE_IPV6@
308 # The HP-UX port makefile, for one, needs access to this symbol
309 HAVE_POSIX_SIGNALS= @HAVE_POSIX_SIGNALS@
311 # This is mainly for use on FreeBSD, where we have both a.out and elf
312 # systems now. May be applicable to other systems to?
313 ELF_SYSTEM= @ELF_SYS@
315 # Backend stack size limit has to be hard-wired on Windows (it's in bytes)
316 WIN32_STACK_RLIMIT=4194304
318 # Pull in platform-specific magic
319 include $(top_builddir)/src/Makefile.port
321 # Set up rpath if enabled. By default it will point to our libdir,
322 # but individual Makefiles can force other rpath paths if needed.
325 ifeq ($(enable_rpath), yes)
330 ##########################################################################
332 # Some variables needed to find some client interfaces
335 # some contribs assumes headers and libs are in the source tree...
336 libpq_srcdir = $(includedir)
337 libpq_builddir = $(libdir)
339 libpq_srcdir = $(top_srcdir)/src/interfaces/libpq
340 libpq_builddir = $(top_builddir)/src/interfaces/libpq
343 # This macro is for use by libraries linking to libpq. (Because libpgport
344 # isn't created with the same link flags as libpq, it can't be used.)
345 libpq = -L$(libpq_builddir) -lpq
347 # If doing static linking, shared library dependency info isn't available,
348 # so add in the libraries that libpq depends on.
349 ifeq ($(enable_shared), no)
350 libpq += $(filter -lintl -lssl -lcrypto -lkrb5 -lcrypt, $(LIBS)) \
351 $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
354 # This macro is for use by client executables (not libraries) that use libpq.
355 # We force clients to pull symbols from the non-shared library libpgport
356 # rather than pulling some libpgport symbols from libpq just because
357 # libpq uses those functions too. This makes applications less
358 # dependent on changes in libpq's usage of pgport. To do this we link to
359 # pgport before libpq. This does cause duplicate -lpgport's to appear
360 # on client link lines.
362 libpq_pgport = -L$(libdir) -lpgport $(libpq)
364 libpq_pgport = -L$(top_builddir)/src/port -lpgport $(libpq)
369 $(MAKE) -C $(libpq_builddir) all
372 $(MAKE) -C $(top_builddir)/src/port all
374 .PHONY: submake-libpq submake-libpgport
377 ##########################################################################
381 # This includes your local customizations if Makefile.custom exists
382 # in the source directory. This file doesn't exist in the original
383 # distribution so that it doesn't get overwritten when you upgrade.
385 # NOTE: Makefile.custom is from the pre-Autoconf days of PostgreSQL.
386 # You are liable to shoot yourself in the foot if you use it without
387 # knowing exactly what you're doing. The preferred (and more
388 # reliable) method is to communicate what you want to do to the
389 # configure script, and leave the makefiles alone.
391 -include $(top_srcdir)/src/Makefile.custom
393 ifneq ($(CUSTOM_INSTALL),)
394 INSTALL= $(CUSTOM_INSTALL)
397 ifneq ($(CUSTOM_CC),)
401 ifneq ($(CUSTOM_COPT),)
412 LDFLAGS += $(PROFILE)
416 ##########################################################################
418 # substitute implementations of C library routines (see src/port/)
420 LIBOBJS = @LIBOBJS@ copydir.o dirmod.o exec.o noblock.o path.o pipe.o pgsleep.o pgstrcasecmp.o qsort.o qsort_arg.o sprompt.o thread.o
422 LIBS := -lpgport $(LIBS)
423 # add location of libpgport.a to LDFLAGS
425 override LDFLAGS := -L$(libdir) $(LDFLAGS)
427 override LDFLAGS := -L$(top_builddir)/src/port $(LDFLAGS)
430 # to make ws2_32.lib the last library, and always link with shfolder,
431 # so SHGetFolderName isn't picked up from shell32.dll
432 ifeq ($(PORTNAME),win32)
433 LIBS += -lws2_32 -lshfolder
436 # Not really standard libc functions, used by the backend.
440 ##########################################################################
442 # Global targets and rules
450 ifeq ($(PORTNAME),win32)
451 # Build rules to add versioninfo resources to win32 binaries
452 WIN32RES += win32ver.o
453 ifeq ($(PGFILESHLIB),1)
458 ifneq (,$(PGAPPICON))
459 PGICOSTR=$(subst /,\/,IDI_ICON ICON \"$(top_builddir)/src/port/$(PGAPPICON).ico\")
461 win32ver.rc: $(top_builddir)/src/port/win32ver.rc
462 sed -e 's;FILEDESC;$(PGFILEDESC);' -e 's;VFT_APP;$(PGFTYPE);' -e 's;_ICO_;$(PGICOSTR);' -e 's;\(VERSION.*\),0 *$$;\1,'`date '+%y%j' | sed 's/^0*//'`';' $(top_builddir)/src/port/win32ver.rc > win32ver.rc
463 win32ver.o: $(top_builddir)/src/port/win32ver.rc
464 sed -e 's;FILEDESC;$(PGFILEDESC);' -e 's;VFT_APP;$(PGFTYPE);' -e 's;_ICO_;$(PGICOSTR);' -e 's;\(VERSION.*\),0 *$$;\1,'`date '+%y%j' | sed 's/^0*//'`';' $(top_builddir)/src/port/win32ver.rc > win32ver.rc
465 windres -i win32ver.rc -o win32ver.o --include-dir=$(top_builddir)/src/include
471 # Remake Makefile.global from Makefile.global.in if the latter
472 # changed. In order to trigger this rule, the including file must
473 # write `include $(top_builddir)/src/Makefile.global', not some
475 $(top_builddir)/src/Makefile.global: $(top_srcdir)/src/Makefile.global.in $(top_builddir)/config.status
476 cd $(top_builddir) && ./config.status src/Makefile.global
478 # Remake pg_config.h from pg_config.h.in if the latter changed.
479 # config.status will not change the timestamp on pg_config.h if it
480 # doesn't change, so as to avoid recompiling the entire tree
481 # unnecessarily. Therefore we make config.status update a timestamp file
482 # stamp-h everytime it runs, so that we don't trigger this rule everytime.
483 # (We do trigger the null rule for stamp-h to pg_config.h everytime; so it's
484 # important for that rule to be null!)
486 # Of course you need to turn on dependency tracking to get any
487 # dependencies on pg_config.h.
488 $(top_builddir)/src/include/pg_config.h: $(top_builddir)/src/include/stamp-h
490 $(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status
491 cd $(top_builddir) && ./config.status src/include/pg_config.h
493 # Also remake ecpg_config.h from ecpg_config.h.in if the latter changed. Values in it can
494 # only change if pg_config.h has changed, so include this file to its dependencies.
495 $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h: $(top_builddir)/src/include/pg_config.h $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h.in $(top_builddir)/config.status
496 cd $(top_builddir) && ./config.status src/interfaces/ecpg/include/ecpg_config.h
498 # When configure changes, rerun configure with the same options as
499 # last time. To change configure, you need to run autoconf manually.
500 $(top_builddir)/config.status: $(top_srcdir)/configure
501 cd $(top_builddir) && ./config.status --recheck
507 @$(MAKE) INSTALL_PROGRAM_ENV="STRIPPROG='$(STRIP)'" \
508 INSTALL_STLIB_ENV="STRIPPROG='$(STRIP_STATIC_LIB)'" \
509 INSTALL_SHLIB_ENV="STRIPPROG='$(STRIP_SHARED_LIB)'" \
510 INSTALL_STRIP_FLAG=-s \
514 ##########################################################################
516 # Automatic dependency generation
517 # -------------------------------
518 # When we configure with --enable-depend then we override the default
519 # compilation rule with the magic below. While or after creating the
520 # actual output file we also create a dependency list for the .c file.
521 # Next time we invoke make we will have top-notch information about
522 # whether this file needs to be updated. The dependency files are kept
523 # in the .deps subdirectory of each directory.
525 autodepend = @autodepend@
527 ifeq ($(autodepend), yes)
530 COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
537 # GCC allows us to create object and dependency file in one invocation.
539 @if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi
540 $(COMPILE.c) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po
544 # Include all the dependency files generated for the current
545 # directory. List /dev/null as dummy because if the wildcard expands
546 # to nothing then make would complain.
547 -include $(wildcard $(DEPDIR)/*.Po) /dev/null
550 clean distclean maintainer-clean: clean-deps
559 ##########################################################################
561 # Native language support
563 ifeq ($(enable_nls), yes)
564 ifneq (,$(wildcard $(srcdir)/nls.mk))
566 include $(top_srcdir)/src/nls-global.mk