2 # $PostgreSQL: pgsql/src/Makefile.global.in,v 1.263 2010/07/05 18:54:37 tgl Exp $
4 #------------------------------------------------------------------------------
5 # All PostgreSQL makefiles include this file and use the variables it sets,
6 # which in turn are put here by the configure script. There is no need for
7 # users to edit this file -- if it turns out to be necessary then that's a
10 # A makefile that includes this file needs to set the variable `subdir' to
11 # the relative path from the top to itself and `top_builddir' to the relative
12 # path from itself to the top before including this file. (The "top" is the
13 # parent directory of the directory this file is in.)
14 #------------------------------------------------------------------------------
17 ##########################################################################
21 .PHONY: all install install-strip installdirs uninstall clean distclean maintainer-clean distprep check installcheck maintainer-check coverage html man installcheck-parallel world install-world installcheck-world
23 # make `all' the default target
26 # Delete target files if the command fails after it has
27 # started to update the file.
30 # PostgreSQL version number
31 VERSION = @PACKAGE_VERSION@
32 MAJORVERSION = @PG_MAJORVERSION@
34 # Support for VPATH builds
35 vpath_build = @vpath_build@
36 abs_top_srcdir = @abs_top_srcdir@
38 ifneq ($(vpath_build),yes)
39 top_srcdir = $(top_builddir)
41 else # vpath_build = yes
42 top_srcdir = $(abs_top_srcdir)
43 srcdir = $(top_srcdir)/$(subdir)
47 vpathsearch = `for f in $(addsuffix /$(1),$(subst :, ,. $(VPATH))); do test -r $$f && echo $$f && break; done`
49 # Saved arguments from configure
50 configure_args = @configure_args@
53 ##########################################################################
55 # Installation directories
57 # These are set by the equivalent --xxxdir configure options. We
58 # append "postgresql" to some of them, if the string does not already
59 # contain "pgsql" or "postgres", in order to avoid directory clutter.
61 # In a PGXS build, we cannot use the values inserted into Makefile.global
62 # by configure, since the installation tree may have been relocated.
63 # Instead get the path values from pg_config.
67 # Note that prefix, exec_prefix, and datarootdir aren't defined in a PGXS build;
68 # makefiles may only use the derived variables such as bindir.
71 exec_prefix := @exec_prefix@
72 datarootdir := @datarootdir@
77 ifeq "$(findstring pgsql, $(datadir))" ""
78 ifeq "$(findstring postgres, $(datadir))" ""
79 override datadir := $(datadir)/postgresql
83 sysconfdir := @sysconfdir@
84 ifeq "$(findstring pgsql, $(sysconfdir))" ""
85 ifeq "$(findstring postgres, $(sysconfdir))" ""
86 override sysconfdir := $(sysconfdir)/postgresql
93 ifeq "$(findstring pgsql, $(pkglibdir))" ""
94 ifeq "$(findstring postgres, $(pkglibdir))" ""
95 override pkglibdir := $(pkglibdir)/postgresql
99 includedir := @includedir@
101 pkgincludedir = $(includedir)
102 ifeq "$(findstring pgsql, $(pkgincludedir))" ""
103 ifeq "$(findstring postgres, $(pkgincludedir))" ""
104 override pkgincludedir := $(pkgincludedir)/postgresql
111 ifeq "$(findstring pgsql, $(docdir))" ""
112 ifeq "$(findstring postgres, $(docdir))" ""
113 override docdir := $(docdir)/postgresql
119 localedir := @localedir@
123 # Extension makefiles should set PG_CONFIG, but older ones might not
125 PG_CONFIG = pg_config
128 bindir := $(shell $(PG_CONFIG) --bindir)
129 datadir := $(shell $(PG_CONFIG) --sharedir)
130 sysconfdir := $(shell $(PG_CONFIG) --sysconfdir)
131 libdir := $(shell $(PG_CONFIG) --libdir)
132 pkglibdir := $(shell $(PG_CONFIG) --pkglibdir)
133 includedir := $(shell $(PG_CONFIG) --includedir)
134 pkgincludedir := $(shell $(PG_CONFIG) --pkgincludedir)
135 mandir := $(shell $(PG_CONFIG) --mandir)
136 docdir := $(shell $(PG_CONFIG) --docdir)
137 localedir := $(shell $(PG_CONFIG) --localedir)
141 # These derived path variables aren't separately configurable.
143 includedir_server = $(pkgincludedir)/server
144 includedir_internal = $(pkgincludedir)/internal
145 pgxsdir = $(pkglibdir)/pgxs
148 ##########################################################################
152 # Records the choice of the various --enable-xxx and --with-xxx options.
154 with_perl = @with_perl@
155 with_python = @with_python@
156 with_tcl = @with_tcl@
157 with_openssl = @with_openssl@
158 with_ossp_uuid = @with_ossp_uuid@
159 with_libxml = @with_libxml@
160 with_libxslt = @with_libxslt@
161 with_system_tzdata = @with_system_tzdata@
162 with_zlib = @with_zlib@
163 enable_shared = @enable_shared@
164 enable_rpath = @enable_rpath@
165 enable_nls = @enable_nls@
166 enable_debug = @enable_debug@
167 enable_dtrace = @enable_dtrace@
168 enable_coverage = @enable_coverage@
169 enable_thread_safety = @enable_thread_safety@
171 python_includespec = @python_includespec@
172 python_libdir = @python_libdir@
173 python_libspec = @python_libspec@
174 python_additional_libs = @python_additional_libs@
175 python_configdir = @python_configdir@
176 python_majorversion = @python_majorversion@
177 python_version = @python_version@
179 krb_srvtab = @krb_srvtab@
182 TCL_LIB_FILE = @TCL_LIB_FILE@
183 TCL_LIBS = @TCL_LIBS@
184 TCL_LIB_SPEC = @TCL_LIB_SPEC@
185 TCL_INCLUDE_SPEC = @TCL_INCLUDE_SPEC@
186 TCL_SHARED_BUILD = @TCL_SHARED_BUILD@
187 TCL_SHLIB_LD_LIBS = @TCL_SHLIB_LD_LIBS@
189 PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
190 PTHREAD_LIBS = @PTHREAD_LIBS@
193 ##########################################################################
200 CPPFLAGS = @CPPFLAGS@
203 override CPPFLAGS := -I$(includedir_server) -I$(includedir_internal) $(CPPFLAGS)
205 override CPPFLAGS := -I$(top_srcdir)/src/include $(CPPFLAGS)
207 override CPPFLAGS := -I$(top_builddir)/src/include $(CPPFLAGS)
213 SUN_STUDIO_CC = @SUN_STUDIO_CC@
219 BISONFLAGS = @BISONFLAGS@ $(YFLAGS)
221 FLEXFLAGS = @FLEXFLAGS@ $(LFLAGS)
223 DTRACEFLAGS = @DTRACEFLAGS@
232 LDAP_LIBS_FE = @LDAP_LIBS_FE@
233 LDAP_LIBS_BE = @LDAP_LIBS_BE@
234 OSSP_UUID_LIBS = @OSSP_UUID_LIBS@
236 with_gnu_ld = @with_gnu_ld@
237 ld_R_works = @ld_R_works@
239 LDFLAGS_EX = @LDFLAGS_EX@
240 LDFLAGS_SL = @LDFLAGS_SL@
250 # quoted to protect pathname with spaces
253 PERL = $(missing) perl
255 perl_archlibexp = @perl_archlibexp@
256 perl_privlibexp = @perl_privlibexp@
257 perl_useshrplib = @perl_useshrplib@
258 perl_embed_ldflags = @perl_embed_ldflags@
265 MSGMERGE = @MSGMERGE@
268 XGETTEXT = @XGETTEXT@
273 PL_TESTDB = pl_regression
274 CONTRIB_TESTDB = contrib_regression
278 INSTALL = $(SHELL) $(top_srcdir)/config/install-sh -c
280 INSTALL_SCRIPT_MODE = 755
281 INSTALL_DATA_MODE = 644
282 INSTALL_PROGRAM = $(INSTALL_PROGRAM_ENV) $(INSTALL) $(INSTALL_STRIP_FLAG)
283 INSTALL_SCRIPT = $(INSTALL) -m $(INSTALL_SCRIPT_MODE)
284 INSTALL_DATA = $(INSTALL) -m $(INSTALL_DATA_MODE)
285 INSTALL_STLIB = $(INSTALL_STLIB_ENV) $(INSTALL_DATA) $(INSTALL_STRIP_FLAG)
286 INSTALL_SHLIB = $(INSTALL_SHLIB_ENV) $(INSTALL) $(INSTALL_SHLIB_OPTS) $(INSTALL_STRIP_FLAG)
287 # Override in Makefile.port if necessary
288 INSTALL_SHLIB_OPTS = -m 755
292 missing = $(SHELL) $(top_srcdir)/config/missing
295 STRIP_STATIC_LIB = @STRIP_STATIC_LIB@
296 STRIP_SHARED_LIB = @STRIP_SHARED_LIB@
300 have_docbook = @have_docbook@
301 COLLATEINDEX = @COLLATEINDEX@
302 DOCBOOKSTYLE = @DOCBOOKSTYLE@
306 XSLTPROC = @XSLTPROC@
314 ifeq ($(enable_coverage),yes)
315 # ccache loses .gcno files
316 export CCACHE_DISABLE = 1
321 DEF_PGPORT = @default_port@
322 WANTED_LANGUAGES = @WANTED_LANGUAGES@
325 ##########################################################################
327 # Additional platform-specific settings
330 # Name of the "template"
333 build_os = @build_os@
337 host_cpu = @host_cpu@
339 # Make HAVE_IPV6 available for initdb script creation
340 HAVE_IPV6= @HAVE_IPV6@
342 # The HP-UX port makefile, for one, needs access to this symbol
343 HAVE_POSIX_SIGNALS= @HAVE_POSIX_SIGNALS@
345 # This is mainly for use on FreeBSD, where we have both a.out and elf
346 # systems now. May be applicable to other systems to?
347 ELF_SYSTEM= @ELF_SYS@
349 # Backend stack size limit has to be hard-wired on Windows (it's in bytes)
350 WIN32_STACK_RLIMIT=4194304
352 # Pull in platform-specific magic
353 include $(top_builddir)/src/Makefile.port
355 # Set up rpath if enabled. By default it will point to our libdir,
356 # but individual Makefiles can force other rpath paths if needed.
359 ifeq ($(enable_rpath), yes)
364 ##########################################################################
366 # Some variables needed to find some client interfaces
369 # some contribs assumes headers and libs are in the source tree...
370 libpq_srcdir = $(includedir)
371 libpq_builddir = $(libdir)
373 libpq_srcdir = $(top_srcdir)/src/interfaces/libpq
374 libpq_builddir = $(top_builddir)/src/interfaces/libpq
377 # This macro is for use by libraries linking to libpq. (Because libpgport
378 # isn't created with the same link flags as libpq, it can't be used.)
379 libpq = -L$(libpq_builddir) -lpq
381 # If doing static linking, shared library dependency info isn't available,
382 # so add in the libraries that libpq depends on.
383 ifeq ($(enable_shared), no)
384 libpq += $(filter -lintl -lssl -lcrypto -lkrb5 -lcrypt, $(LIBS)) \
385 $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
388 # This macro is for use by client executables (not libraries) that use libpq.
389 # We force clients to pull symbols from the non-shared library libpgport
390 # rather than pulling some libpgport symbols from libpq just because
391 # libpq uses those functions too. This makes applications less
392 # dependent on changes in libpq's usage of pgport. To do this we link to
393 # pgport before libpq. This does cause duplicate -lpgport's to appear
394 # on client link lines.
396 libpq_pgport = -L$(libdir) -lpgport $(libpq)
398 libpq_pgport = -L$(top_builddir)/src/port -lpgport $(libpq)
403 $(MAKE) -C $(libpq_builddir) all
406 $(MAKE) -C $(top_builddir)/src/port all
408 .PHONY: submake-libpq submake-libpgport
411 ##########################################################################
415 # This includes your local customizations if Makefile.custom exists
416 # in the source directory. This file doesn't exist in the original
417 # distribution so that it doesn't get overwritten when you upgrade.
419 # NOTE: Makefile.custom is from the pre-Autoconf days of PostgreSQL.
420 # You are liable to shoot yourself in the foot if you use it without
421 # knowing exactly what you're doing. The preferred (and more
422 # reliable) method is to communicate what you want to do to the
423 # configure script, and leave the makefiles alone.
425 -include $(top_srcdir)/src/Makefile.custom
427 ifneq ($(CUSTOM_INSTALL),)
428 INSTALL= $(CUSTOM_INSTALL)
431 ifneq ($(CUSTOM_CC),)
435 ifneq ($(CUSTOM_COPT),)
446 LDFLAGS += $(PROFILE)
450 ##########################################################################
452 # substitute implementations of C library routines (see src/port/)
456 LIBS := -lpgport $(LIBS)
457 # add location of libpgport.a to LDFLAGS
459 LDFLAGS += -L$(libdir)
461 LDFLAGS += -L$(top_builddir)/src/port
464 # to make ws2_32.lib the last library, and always link with shfolder,
465 # so SHGetFolderName isn't picked up from shell32.dll
466 ifeq ($(PORTNAME),win32)
467 LIBS += -lws2_32 -lshfolder
470 # Not really standard libc functions, used by the backend.
474 ##########################################################################
476 # Global targets and rules
479 $(CPP) $(CPPFLAGS) -o $@ $<
482 $(GZIP) --best -c $< >$@
489 # Remake Makefile.global from Makefile.global.in if the latter
490 # changed. In order to trigger this rule, the including file must
491 # write `include $(top_builddir)/src/Makefile.global', not some
493 $(top_builddir)/src/Makefile.global: $(top_srcdir)/src/Makefile.global.in $(top_builddir)/config.status
494 cd $(top_builddir) && ./config.status src/Makefile.global
496 # Remake pg_config.h from pg_config.h.in if the latter changed.
497 # config.status will not change the timestamp on pg_config.h if it
498 # doesn't change, so as to avoid recompiling the entire tree
499 # unnecessarily. Therefore we make config.status update a timestamp file
500 # stamp-h everytime it runs, so that we don't trigger this rule everytime.
501 # (We do trigger the null rule for stamp-h to pg_config.h everytime; so it's
502 # important for that rule to be null!)
504 # Of course you need to turn on dependency tracking to get any
505 # dependencies on pg_config.h.
506 $(top_builddir)/src/include/pg_config.h: $(top_builddir)/src/include/stamp-h
508 $(top_builddir)/src/include/stamp-h: $(top_srcdir)/src/include/pg_config.h.in $(top_builddir)/config.status
509 cd $(top_builddir) && ./config.status src/include/pg_config.h
511 # Also remake ecpg_config.h from ecpg_config.h.in if the latter changed, same
513 $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h: $(top_builddir)/src/interfaces/ecpg/include/stamp-h
515 $(top_builddir)/src/interfaces/ecpg/include/stamp-h: $(top_builddir)/src/interfaces/ecpg/include/ecpg_config.h.in $(top_builddir)/config.status
516 cd $(top_builddir) && ./config.status src/interfaces/ecpg/include/ecpg_config.h
518 # When configure changes, rerun configure with the same options as
519 # last time. To change configure, you need to run autoconf manually.
520 $(top_builddir)/config.status: $(top_srcdir)/configure
521 cd $(top_builddir) && ./config.status --recheck
527 @$(MAKE) INSTALL_PROGRAM_ENV="STRIPPROG='$(STRIP)'" \
528 INSTALL_STLIB_ENV="STRIPPROG='$(STRIP_STATIC_LIB)'" \
529 INSTALL_SHLIB_ENV="STRIPPROG='$(STRIP_SHARED_LIB)'" \
530 INSTALL_STRIP_FLAG=-s \
534 ##########################################################################
536 # Automatic dependency generation
537 # -------------------------------
538 # When we configure with --enable-depend then we override the default
539 # compilation rule with the magic below. While or after creating the
540 # actual output file we also create a dependency list for the .c file.
541 # Next time we invoke make we will have top-notch information about
542 # whether this file needs to be updated. The dependency files are kept
543 # in the .deps subdirectory of each directory.
545 autodepend = @autodepend@
547 ifeq ($(autodepend), yes)
550 COMPILE.c = $(CC) $(CFLAGS) $(CPPFLAGS) -c
557 # GCC allows us to create object and dependency file in one invocation.
559 @if test ! -d $(DEPDIR); then mkdir -p $(DEPDIR); fi
560 $(COMPILE.c) -o $@ $< -MMD -MP -MF $(DEPDIR)/$(*F).Po
564 # Include all the dependency files generated for the current
565 # directory. List /dev/null as dummy because if the wildcard expands
566 # to nothing then make would complain.
567 -include $(wildcard $(DEPDIR)/*.Po) /dev/null
570 clean distclean maintainer-clean: clean-deps
579 ##########################################################################
581 # Native language support
583 ifeq ($(enable_nls), yes)
584 ifneq (,$(wildcard $(srcdir)/nls.mk))
586 include $(top_srcdir)/src/nls-global.mk
592 ##########################################################################
596 # Explanation of involved files:
599 # foo.gcno gcov graph (a.k.a. "notes") file, created at compile time
600 # (by gcc -ftest-coverage)
601 # foo.gcda gcov data file, created when the program is run (for
602 # programs compiled with gcc -fprofile-arcs)
603 # foo.c.gcov gcov output file with coverage information, created by
604 # gcov from foo.gcda (by "make coverage")
605 # foo.c.gcov.out stdout captured when foo.c.gcov is created, mildly
607 # lcov.info lcov tracefile, built from gcda files in one directory,
608 # later collected by "make coverage-html"
610 ifeq ($(enable_coverage), yes)
612 # There is a strange interaction between lcov and existing .gcov
613 # output files. Hence the rm command and the ordering dependency.
615 gcda_files := $(wildcard *.gcda)
617 lcov.info: $(gcda_files)
619 $(if $^,$(LCOV) -d . -c -o $@ $(LCOVFLAGS))
621 %.c.gcov: %.gcda | lcov.info
622 $(GCOV) -b -f -p -o . $(GCOVFLAGS) $*.c >$*.c.gcov.out
624 coverage: $(gcda_files:.gcda=.c.gcov) lcov.info
625 $(if $(SUBDIRS),for dir in $(SUBDIRS); do $(MAKE) -C $$dir coverage || exit; done)
627 .PHONY: coverage-html
628 coverage-html: coverage
631 $(GENHTML) --show-details --legend --output-directory=coverage --title=PostgreSQL --num-spaces=4 --prefix=$(abs_top_srcdir) `find . -name lcov.info -print`
635 clean distclean maintainer-clean: clean-coverage
637 .PHONY: clean-coverage
640 rm -f *.gcda *.gcno lcov.info *.gcov *.gcov.out
643 # User-callable target to reset counts between test runs
645 rm -f `find . -name '*.gcda' -print`
647 endif # enable_coverage