4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
23 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
24 * Copyright (c) 2012 by Delphix. All rights reserved.
28 * Virtual Device Labels
29 * ---------------------
31 * The vdev label serves several distinct purposes:
33 * 1. Uniquely identify this device as part of a ZFS pool and confirm its
34 * identity within the pool.
36 * 2. Verify that all the devices given in a configuration are present
39 * 3. Determine the uberblock for the pool.
41 * 4. In case of an import operation, determine the configuration of the
42 * toplevel vdev of which it is a part.
44 * 5. If an import operation cannot find all the devices in the pool,
45 * provide enough information to the administrator to determine which
46 * devices are missing.
48 * It is important to note that while the kernel is responsible for writing the
49 * label, it only consumes the information in the first three cases. The
50 * latter information is only consumed in userland when determining the
51 * configuration to import a pool.
57 * Before describing the contents of the label, it's important to understand how
58 * the labels are written and updated with respect to the uberblock.
60 * When the pool configuration is altered, either because it was newly created
61 * or a device was added, we want to update all the labels such that we can deal
62 * with fatal failure at any point. To this end, each disk has two labels which
63 * are updated before and after the uberblock is synced. Assuming we have
64 * labels and an uberblock with the following transaction groups:
67 * +------+ +------+ +------+
69 * | t10 | | t10 | | t10 |
71 * +------+ +------+ +------+
73 * In this stable state, the labels and the uberblock were all updated within
74 * the same transaction group (10). Each label is mirrored and checksummed, so
75 * that we can detect when we fail partway through writing the label.
77 * In order to identify which labels are valid, the labels are written in the
80 * 1. For each vdev, update 'L1' to the new label
81 * 2. Update the uberblock
82 * 3. For each vdev, update 'L2' to the new label
84 * Given arbitrary failure, we can determine the correct label to use based on
85 * the transaction group. If we fail after updating L1 but before updating the
86 * UB, we will notice that L1's transaction group is greater than the uberblock,
87 * so L2 must be valid. If we fail after writing the uberblock but before
88 * writing L2, we will notice that L2's transaction group is less than L1, and
89 * therefore L1 is valid.
91 * Another added complexity is that not every label is updated when the config
92 * is synced. If we add a single device, we do not want to have to re-write
93 * every label for every device in the pool. This means that both L1 and L2 may
94 * be older than the pool uberblock, because the necessary information is stored
101 * The vdev label consists of two distinct parts, and is wrapped within the
102 * vdev_label_t structure. The label includes 8k of padding to permit legacy
103 * VTOC disk labels, but is otherwise ignored.
105 * The first half of the label is a packed nvlist which contains pool wide
106 * properties, per-vdev properties, and configuration information. It is
107 * described in more detail below.
109 * The latter half of the label consists of a redundant array of uberblocks.
110 * These uberblocks are updated whenever a transaction group is committed,
111 * or when the configuration is updated. When a pool is loaded, we scan each
112 * vdev for the 'best' uberblock.
115 * Configuration Information
116 * -------------------------
118 * The nvlist describing the pool and vdev contains the following elements:
120 * version ZFS on-disk version
123 * txg Transaction group in which this label was written
124 * pool_guid Unique identifier for this pool
125 * vdev_tree An nvlist describing vdev tree.
127 * An nvlist of the features necessary for reading the MOS.
129 * Each leaf device label also contains the following:
131 * top_guid Unique ID for top-level vdev in which this is contained
132 * guid Unique ID for the leaf vdev
134 * The 'vs' configuration follows the format described in 'spa_config.c'.
137 #include <sys/zfs_context.h>
139 #include <sys/spa_impl.h>
142 #include <sys/vdev.h>
143 #include <sys/vdev_impl.h>
144 #include <sys/uberblock_impl.h>
145 #include <sys/metaslab.h>
147 #include <sys/dsl_scan.h>
148 #include <sys/fs/zfs.h>
151 * Basic routines to read and write from a vdev label.
152 * Used throughout the rest of this file.
155 vdev_label_offset(uint64_t psize, int l, uint64_t offset)
157 ASSERT(offset < sizeof (vdev_label_t));
158 ASSERT(P2PHASE_TYPED(psize, sizeof (vdev_label_t), uint64_t) == 0);
160 return (offset + l * sizeof (vdev_label_t) + (l < VDEV_LABELS / 2 ?
161 0 : psize - VDEV_LABELS * sizeof (vdev_label_t)));
165 * Returns back the vdev label associated with the passed in offset.
168 vdev_label_number(uint64_t psize, uint64_t offset)
172 if (offset >= psize - VDEV_LABEL_END_SIZE) {
173 offset -= psize - VDEV_LABEL_END_SIZE;
174 offset += (VDEV_LABELS / 2) * sizeof (vdev_label_t);
176 l = offset / sizeof (vdev_label_t);
177 return (l < VDEV_LABELS ? l : -1);
181 vdev_label_read(zio_t *zio, vdev_t *vd, int l, void *buf, uint64_t offset,
182 uint64_t size, zio_done_func_t *done, void *private, int flags)
184 ASSERT(spa_config_held(zio->io_spa, SCL_STATE_ALL, RW_WRITER) ==
186 ASSERT(flags & ZIO_FLAG_CONFIG_WRITER);
188 zio_nowait(zio_read_phys(zio, vd,
189 vdev_label_offset(vd->vdev_psize, l, offset),
190 size, buf, ZIO_CHECKSUM_LABEL, done, private,
191 ZIO_PRIORITY_SYNC_READ, flags, B_TRUE));
195 vdev_label_write(zio_t *zio, vdev_t *vd, int l, void *buf, uint64_t offset,
196 uint64_t size, zio_done_func_t *done, void *private, int flags)
198 ASSERT(spa_config_held(zio->io_spa, SCL_ALL, RW_WRITER) == SCL_ALL ||
199 (spa_config_held(zio->io_spa, SCL_CONFIG | SCL_STATE, RW_READER) ==
200 (SCL_CONFIG | SCL_STATE) &&
201 dsl_pool_sync_context(spa_get_dsl(zio->io_spa))));
202 ASSERT(flags & ZIO_FLAG_CONFIG_WRITER);
204 zio_nowait(zio_write_phys(zio, vd,
205 vdev_label_offset(vd->vdev_psize, l, offset),
206 size, buf, ZIO_CHECKSUM_LABEL, done, private,
207 ZIO_PRIORITY_SYNC_WRITE, flags, B_TRUE));
211 * Generate the nvlist representing this vdev's config.
214 vdev_config_generate(spa_t *spa, vdev_t *vd, boolean_t getstats,
215 vdev_config_flag_t flags)
219 VERIFY(nvlist_alloc(&nv, NV_UNIQUE_NAME, KM_PUSHPAGE) == 0);
221 VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_TYPE,
222 vd->vdev_ops->vdev_op_type) == 0);
223 if (!(flags & (VDEV_CONFIG_SPARE | VDEV_CONFIG_L2CACHE)))
224 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_ID, vd->vdev_id)
226 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_GUID, vd->vdev_guid) == 0);
228 if (vd->vdev_path != NULL)
229 VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_PATH,
230 vd->vdev_path) == 0);
232 if (vd->vdev_devid != NULL)
233 VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_DEVID,
234 vd->vdev_devid) == 0);
236 if (vd->vdev_physpath != NULL)
237 VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_PHYS_PATH,
238 vd->vdev_physpath) == 0);
240 if (vd->vdev_fru != NULL)
241 VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_FRU,
244 if (vd->vdev_nparity != 0) {
245 ASSERT(strcmp(vd->vdev_ops->vdev_op_type,
246 VDEV_TYPE_RAIDZ) == 0);
249 * Make sure someone hasn't managed to sneak a fancy new vdev
250 * into a crufty old storage pool.
252 ASSERT(vd->vdev_nparity == 1 ||
253 (vd->vdev_nparity <= 2 &&
254 spa_version(spa) >= SPA_VERSION_RAIDZ2) ||
255 (vd->vdev_nparity <= 3 &&
256 spa_version(spa) >= SPA_VERSION_RAIDZ3));
259 * Note that we'll add the nparity tag even on storage pools
260 * that only support a single parity device -- older software
261 * will just ignore it.
263 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_NPARITY,
264 vd->vdev_nparity) == 0);
267 if (vd->vdev_wholedisk != -1ULL)
268 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_WHOLE_DISK,
269 vd->vdev_wholedisk) == 0);
271 if (vd->vdev_not_present)
272 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_NOT_PRESENT, 1) == 0);
274 if (vd->vdev_isspare)
275 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_IS_SPARE, 1) == 0);
277 if (!(flags & (VDEV_CONFIG_SPARE | VDEV_CONFIG_L2CACHE)) &&
278 vd == vd->vdev_top) {
279 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_METASLAB_ARRAY,
280 vd->vdev_ms_array) == 0);
281 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_METASLAB_SHIFT,
282 vd->vdev_ms_shift) == 0);
283 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_ASHIFT,
284 vd->vdev_ashift) == 0);
285 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_ASIZE,
286 vd->vdev_asize) == 0);
287 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_IS_LOG,
288 vd->vdev_islog) == 0);
289 if (vd->vdev_removing)
290 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_REMOVING,
291 vd->vdev_removing) == 0);
294 if (vd->vdev_dtl_smo.smo_object != 0)
295 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_DTL,
296 vd->vdev_dtl_smo.smo_object) == 0);
299 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_CREATE_TXG,
300 vd->vdev_crtxg) == 0);
306 vdev_get_stats(vd, &vs);
307 VERIFY(nvlist_add_uint64_array(nv, ZPOOL_CONFIG_VDEV_STATS,
308 (uint64_t *)&vs, sizeof (vs) / sizeof (uint64_t)) == 0);
310 /* provide either current or previous scan information */
311 if (spa_scan_get_stats(spa, &ps) == 0) {
312 VERIFY(nvlist_add_uint64_array(nv,
313 ZPOOL_CONFIG_SCAN_STATS, (uint64_t *)&ps,
314 sizeof (pool_scan_stat_t) / sizeof (uint64_t))
319 if (!vd->vdev_ops->vdev_op_leaf) {
323 ASSERT(!vd->vdev_ishole);
325 child = kmem_alloc(vd->vdev_children * sizeof (nvlist_t *),
328 for (c = 0, idx = 0; c < vd->vdev_children; c++) {
329 vdev_t *cvd = vd->vdev_child[c];
332 * If we're generating an nvlist of removing
333 * vdevs then skip over any device which is
336 if ((flags & VDEV_CONFIG_REMOVING) &&
340 child[idx++] = vdev_config_generate(spa, cvd,
345 VERIFY(nvlist_add_nvlist_array(nv,
346 ZPOOL_CONFIG_CHILDREN, child, idx) == 0);
349 for (c = 0; c < idx; c++)
350 nvlist_free(child[c]);
352 kmem_free(child, vd->vdev_children * sizeof (nvlist_t *));
355 const char *aux = NULL;
357 if (vd->vdev_offline && !vd->vdev_tmpoffline)
358 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_OFFLINE,
360 if (vd->vdev_resilvering)
361 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_RESILVERING,
363 if (vd->vdev_faulted)
364 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_FAULTED,
366 if (vd->vdev_degraded)
367 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_DEGRADED,
369 if (vd->vdev_removed)
370 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_REMOVED,
372 if (vd->vdev_unspare)
373 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_UNSPARE,
376 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_IS_HOLE,
379 switch (vd->vdev_stat.vs_aux) {
380 case VDEV_AUX_ERR_EXCEEDED:
381 aux = "err_exceeded";
384 case VDEV_AUX_EXTERNAL:
390 VERIFY(nvlist_add_string(nv, ZPOOL_CONFIG_AUX_STATE,
393 if (vd->vdev_splitting && vd->vdev_orig_guid != 0LL) {
394 VERIFY(nvlist_add_uint64(nv, ZPOOL_CONFIG_ORIG_GUID,
395 vd->vdev_orig_guid) == 0);
403 * Generate a view of the top-level vdevs. If we currently have holes
404 * in the namespace, then generate an array which contains a list of holey
405 * vdevs. Additionally, add the number of top-level children that currently
409 vdev_top_config_generate(spa_t *spa, nvlist_t *config)
411 vdev_t *rvd = spa->spa_root_vdev;
415 array = kmem_alloc(rvd->vdev_children * sizeof (uint64_t), KM_PUSHPAGE);
417 for (c = 0, idx = 0; c < rvd->vdev_children; c++) {
418 vdev_t *tvd = rvd->vdev_child[c];
420 if (tvd->vdev_ishole)
425 VERIFY(nvlist_add_uint64_array(config, ZPOOL_CONFIG_HOLE_ARRAY,
429 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_VDEV_CHILDREN,
430 rvd->vdev_children) == 0);
432 kmem_free(array, rvd->vdev_children * sizeof (uint64_t));
436 * Returns the configuration from the label of the given vdev. If 'label' is
437 * VDEV_BEST_LABEL, each label of the vdev will be read until a valid
438 * configuration is found; otherwise, only the specified label will be read.
441 vdev_label_read_config(vdev_t *vd, int label)
443 spa_t *spa = vd->vdev_spa;
444 nvlist_t *config = NULL;
447 int flags = ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_CANFAIL |
448 ZIO_FLAG_SPECULATIVE;
451 ASSERT(spa_config_held(spa, SCL_STATE_ALL, RW_WRITER) == SCL_STATE_ALL);
453 if (!vdev_readable(vd))
456 vp = zio_buf_alloc(sizeof (vdev_phys_t));
459 for (l = 0; l < VDEV_LABELS; l++) {
460 if (label >= 0 && label < VDEV_LABELS && label != l)
463 zio = zio_root(spa, NULL, NULL, flags);
465 vdev_label_read(zio, vd, l, vp,
466 offsetof(vdev_label_t, vl_vdev_phys),
467 sizeof (vdev_phys_t), NULL, NULL, flags);
469 if (zio_wait(zio) == 0 &&
470 nvlist_unpack(vp->vp_nvlist, sizeof (vp->vp_nvlist),
474 if (config != NULL) {
480 if (config == NULL && !(flags & ZIO_FLAG_TRYHARD)) {
481 flags |= ZIO_FLAG_TRYHARD;
485 zio_buf_free(vp, sizeof (vdev_phys_t));
491 * Determine if a device is in use. The 'spare_guid' parameter will be filled
492 * in with the device guid if this spare is active elsewhere on the system.
495 vdev_inuse(vdev_t *vd, uint64_t crtxg, vdev_labeltype_t reason,
496 uint64_t *spare_guid, uint64_t *l2cache_guid)
498 spa_t *spa = vd->vdev_spa;
499 uint64_t state, pool_guid, device_guid, txg, spare_pool;
506 *l2cache_guid = 0ULL;
509 * Read the label, if any, and perform some basic sanity checks.
511 if ((label = vdev_label_read_config(vd, VDEV_BEST_LABEL)) == NULL)
514 (void) nvlist_lookup_uint64(label, ZPOOL_CONFIG_CREATE_TXG,
517 if (nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_STATE,
519 nvlist_lookup_uint64(label, ZPOOL_CONFIG_GUID,
520 &device_guid) != 0) {
525 if (state != POOL_STATE_SPARE && state != POOL_STATE_L2CACHE &&
526 (nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_GUID,
528 nvlist_lookup_uint64(label, ZPOOL_CONFIG_POOL_TXG,
537 * Check to see if this device indeed belongs to the pool it claims to
538 * be a part of. The only way this is allowed is if the device is a hot
539 * spare (which we check for later on).
541 if (state != POOL_STATE_SPARE && state != POOL_STATE_L2CACHE &&
542 !spa_guid_exists(pool_guid, device_guid) &&
543 !spa_spare_exists(device_guid, NULL, NULL) &&
544 !spa_l2cache_exists(device_guid, NULL))
548 * If the transaction group is zero, then this an initialized (but
549 * unused) label. This is only an error if the create transaction
550 * on-disk is the same as the one we're using now, in which case the
551 * user has attempted to add the same vdev multiple times in the same
554 if (state != POOL_STATE_SPARE && state != POOL_STATE_L2CACHE &&
555 txg == 0 && vdtxg == crtxg)
559 * Check to see if this is a spare device. We do an explicit check for
560 * spa_has_spare() here because it may be on our pending list of spares
561 * to add. We also check if it is an l2cache device.
563 if (spa_spare_exists(device_guid, &spare_pool, NULL) ||
564 spa_has_spare(spa, device_guid)) {
566 *spare_guid = device_guid;
569 case VDEV_LABEL_CREATE:
570 case VDEV_LABEL_L2CACHE:
573 case VDEV_LABEL_REPLACE:
574 return (!spa_has_spare(spa, device_guid) ||
577 case VDEV_LABEL_SPARE:
578 return (spa_has_spare(spa, device_guid));
585 * Check to see if this is an l2cache device.
587 if (spa_l2cache_exists(device_guid, NULL))
591 * We can't rely on a pool's state if it's been imported
592 * read-only. Instead we look to see if the pools is marked
593 * read-only in the namespace and set the state to active.
595 if ((spa = spa_by_guid(pool_guid, device_guid)) != NULL &&
596 spa_mode(spa) == FREAD)
597 state = POOL_STATE_ACTIVE;
600 * If the device is marked ACTIVE, then this device is in use by another
601 * pool on the system.
603 return (state == POOL_STATE_ACTIVE);
607 * Initialize a vdev label. We check to make sure each leaf device is not in
608 * use, and writable. We put down an initial label which we will later
609 * overwrite with a complete label. Note that it's important to do this
610 * sequentially, not in parallel, so that we catch cases of multiple use of the
611 * same leaf vdev in the vdev we're creating -- e.g. mirroring a disk with
615 vdev_label_init(vdev_t *vd, uint64_t crtxg, vdev_labeltype_t reason)
617 spa_t *spa = vd->vdev_spa;
626 uint64_t spare_guid = 0, l2cache_guid = 0;
627 int flags = ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_CANFAIL;
631 ASSERT(spa_config_held(spa, SCL_ALL, RW_WRITER) == SCL_ALL);
633 for (c = 0; c < vd->vdev_children; c++)
634 if ((error = vdev_label_init(vd->vdev_child[c],
635 crtxg, reason)) != 0)
638 /* Track the creation time for this vdev */
639 vd->vdev_crtxg = crtxg;
641 if (!vd->vdev_ops->vdev_op_leaf)
645 * Dead vdevs cannot be initialized.
647 if (vdev_is_dead(vd))
651 * Determine if the vdev is in use.
653 if (reason != VDEV_LABEL_REMOVE && reason != VDEV_LABEL_SPLIT &&
654 vdev_inuse(vd, crtxg, reason, &spare_guid, &l2cache_guid))
658 * If this is a request to add or replace a spare or l2cache device
659 * that is in use elsewhere on the system, then we must update the
660 * guid (which was initialized to a random value) to reflect the
661 * actual GUID (which is shared between multiple pools).
663 if (reason != VDEV_LABEL_REMOVE && reason != VDEV_LABEL_L2CACHE &&
664 spare_guid != 0ULL) {
665 uint64_t guid_delta = spare_guid - vd->vdev_guid;
667 vd->vdev_guid += guid_delta;
669 for (pvd = vd; pvd != NULL; pvd = pvd->vdev_parent)
670 pvd->vdev_guid_sum += guid_delta;
673 * If this is a replacement, then we want to fallthrough to the
674 * rest of the code. If we're adding a spare, then it's already
675 * labeled appropriately and we can just return.
677 if (reason == VDEV_LABEL_SPARE)
679 ASSERT(reason == VDEV_LABEL_REPLACE ||
680 reason == VDEV_LABEL_SPLIT);
683 if (reason != VDEV_LABEL_REMOVE && reason != VDEV_LABEL_SPARE &&
684 l2cache_guid != 0ULL) {
685 uint64_t guid_delta = l2cache_guid - vd->vdev_guid;
687 vd->vdev_guid += guid_delta;
689 for (pvd = vd; pvd != NULL; pvd = pvd->vdev_parent)
690 pvd->vdev_guid_sum += guid_delta;
693 * If this is a replacement, then we want to fallthrough to the
694 * rest of the code. If we're adding an l2cache, then it's
695 * already labeled appropriately and we can just return.
697 if (reason == VDEV_LABEL_L2CACHE)
699 ASSERT(reason == VDEV_LABEL_REPLACE);
703 * Initialize its label.
705 vp = zio_buf_alloc(sizeof (vdev_phys_t));
706 bzero(vp, sizeof (vdev_phys_t));
709 * Generate a label describing the pool and our top-level vdev.
710 * We mark it as being from txg 0 to indicate that it's not
711 * really part of an active pool just yet. The labels will
712 * be written again with a meaningful txg by spa_sync().
714 if (reason == VDEV_LABEL_SPARE ||
715 (reason == VDEV_LABEL_REMOVE && vd->vdev_isspare)) {
717 * For inactive hot spares, we generate a special label that
718 * identifies as a mutually shared hot spare. We write the
719 * label if we are adding a hot spare, or if we are removing an
720 * active hot spare (in which case we want to revert the
723 VERIFY(nvlist_alloc(&label, NV_UNIQUE_NAME, KM_PUSHPAGE) == 0);
725 VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_VERSION,
726 spa_version(spa)) == 0);
727 VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_POOL_STATE,
728 POOL_STATE_SPARE) == 0);
729 VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_GUID,
730 vd->vdev_guid) == 0);
731 } else if (reason == VDEV_LABEL_L2CACHE ||
732 (reason == VDEV_LABEL_REMOVE && vd->vdev_isl2cache)) {
734 * For level 2 ARC devices, add a special label.
736 VERIFY(nvlist_alloc(&label, NV_UNIQUE_NAME, KM_PUSHPAGE) == 0);
738 VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_VERSION,
739 spa_version(spa)) == 0);
740 VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_POOL_STATE,
741 POOL_STATE_L2CACHE) == 0);
742 VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_GUID,
743 vd->vdev_guid) == 0);
747 if (reason == VDEV_LABEL_SPLIT)
748 txg = spa->spa_uberblock.ub_txg;
749 label = spa_config_generate(spa, vd, txg, B_FALSE);
752 * Add our creation time. This allows us to detect multiple
753 * vdev uses as described above, and automatically expires if we
756 VERIFY(nvlist_add_uint64(label, ZPOOL_CONFIG_CREATE_TXG,
761 buflen = sizeof (vp->vp_nvlist);
763 error = nvlist_pack(label, &buf, &buflen, NV_ENCODE_XDR, KM_PUSHPAGE);
766 zio_buf_free(vp, sizeof (vdev_phys_t));
767 /* EFAULT means nvlist_pack ran out of room */
768 return (error == EFAULT ? ENAMETOOLONG : EINVAL);
772 * Initialize uberblock template.
774 ub = zio_buf_alloc(VDEV_UBERBLOCK_RING);
775 bzero(ub, VDEV_UBERBLOCK_RING);
776 *ub = spa->spa_uberblock;
779 /* Initialize the 2nd padding area. */
780 pad2 = zio_buf_alloc(VDEV_PAD_SIZE);
781 bzero(pad2, VDEV_PAD_SIZE);
784 * Write everything in parallel.
787 zio = zio_root(spa, NULL, NULL, flags);
789 for (l = 0; l < VDEV_LABELS; l++) {
791 vdev_label_write(zio, vd, l, vp,
792 offsetof(vdev_label_t, vl_vdev_phys),
793 sizeof (vdev_phys_t), NULL, NULL, flags);
796 * Skip the 1st padding area.
797 * Zero out the 2nd padding area where it might have
798 * left over data from previous filesystem format.
800 vdev_label_write(zio, vd, l, pad2,
801 offsetof(vdev_label_t, vl_pad2),
802 VDEV_PAD_SIZE, NULL, NULL, flags);
804 vdev_label_write(zio, vd, l, ub,
805 offsetof(vdev_label_t, vl_uberblock),
806 VDEV_UBERBLOCK_RING, NULL, NULL, flags);
809 error = zio_wait(zio);
811 if (error != 0 && !(flags & ZIO_FLAG_TRYHARD)) {
812 flags |= ZIO_FLAG_TRYHARD;
817 zio_buf_free(pad2, VDEV_PAD_SIZE);
818 zio_buf_free(ub, VDEV_UBERBLOCK_RING);
819 zio_buf_free(vp, sizeof (vdev_phys_t));
822 * If this vdev hasn't been previously identified as a spare, then we
823 * mark it as such only if a) we are labeling it as a spare, or b) it
824 * exists as a spare elsewhere in the system. Do the same for
825 * level 2 ARC devices.
827 if (error == 0 && !vd->vdev_isspare &&
828 (reason == VDEV_LABEL_SPARE ||
829 spa_spare_exists(vd->vdev_guid, NULL, NULL)))
832 if (error == 0 && !vd->vdev_isl2cache &&
833 (reason == VDEV_LABEL_L2CACHE ||
834 spa_l2cache_exists(vd->vdev_guid, NULL)))
841 * ==========================================================================
842 * uberblock load/sync
843 * ==========================================================================
847 * Consider the following situation: txg is safely synced to disk. We've
848 * written the first uberblock for txg + 1, and then we lose power. When we
849 * come back up, we fail to see the uberblock for txg + 1 because, say,
850 * it was on a mirrored device and the replica to which we wrote txg + 1
851 * is now offline. If we then make some changes and sync txg + 1, and then
852 * the missing replica comes back, then for a few seconds we'll have two
853 * conflicting uberblocks on disk with the same txg. The solution is simple:
854 * among uberblocks with equal txg, choose the one with the latest timestamp.
857 vdev_uberblock_compare(uberblock_t *ub1, uberblock_t *ub2)
859 if (ub1->ub_txg < ub2->ub_txg)
861 if (ub1->ub_txg > ub2->ub_txg)
864 if (ub1->ub_timestamp < ub2->ub_timestamp)
866 if (ub1->ub_timestamp > ub2->ub_timestamp)
873 uberblock_t *ubl_ubbest; /* Best uberblock */
874 vdev_t *ubl_vd; /* vdev associated with the above */
875 int ubl_label; /* Label associated with the above */
879 vdev_uberblock_load_done(zio_t *zio)
881 vdev_t *vd = zio->io_vd;
882 spa_t *spa = zio->io_spa;
883 zio_t *rio = zio->io_private;
884 uberblock_t *ub = zio->io_data;
885 struct ubl_cbdata *cbp = rio->io_private;
887 ASSERT3U(zio->io_size, ==, VDEV_UBERBLOCK_SIZE(vd));
889 if (zio->io_error == 0 && uberblock_verify(ub) == 0) {
890 mutex_enter(&rio->io_lock);
891 if (ub->ub_txg <= spa->spa_load_max_txg &&
892 vdev_uberblock_compare(ub, cbp->ubl_ubbest) > 0) {
894 * Keep track of the vdev and label in which this
895 * uberblock was found. We will use this information
896 * later to obtain the config nvlist associated with
899 *cbp->ubl_ubbest = *ub;
901 cbp->ubl_label = vdev_label_number(vd->vdev_psize,
904 mutex_exit(&rio->io_lock);
907 zio_buf_free(zio->io_data, zio->io_size);
911 vdev_uberblock_load_impl(zio_t *zio, vdev_t *vd, int flags,
912 struct ubl_cbdata *cbp)
916 for (c = 0; c < vd->vdev_children; c++)
917 vdev_uberblock_load_impl(zio, vd->vdev_child[c], flags, cbp);
919 if (vd->vdev_ops->vdev_op_leaf && vdev_readable(vd)) {
920 for (l = 0; l < VDEV_LABELS; l++) {
921 for (n = 0; n < VDEV_UBERBLOCK_COUNT(vd); n++) {
922 vdev_label_read(zio, vd, l,
923 zio_buf_alloc(VDEV_UBERBLOCK_SIZE(vd)),
924 VDEV_UBERBLOCK_OFFSET(vd, n),
925 VDEV_UBERBLOCK_SIZE(vd),
926 vdev_uberblock_load_done, zio, flags);
933 * Reads the 'best' uberblock from disk along with its associated
934 * configuration. First, we read the uberblock array of each label of each
935 * vdev, keeping track of the uberblock with the highest txg in each array.
936 * Then, we read the configuration from the same label as the best uberblock.
939 vdev_uberblock_load(vdev_t *rvd, uberblock_t *ub, nvlist_t **config)
943 spa_t *spa = rvd->vdev_spa;
944 struct ubl_cbdata cb;
945 int flags = ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_CANFAIL |
946 ZIO_FLAG_SPECULATIVE | ZIO_FLAG_TRYHARD;
951 bzero(ub, sizeof (uberblock_t));
957 spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
958 zio = zio_root(spa, NULL, &cb, flags);
959 vdev_uberblock_load_impl(zio, rvd, flags, &cb);
960 (void) zio_wait(zio);
961 if (cb.ubl_vd != NULL) {
962 for (i = cb.ubl_label % 2; i < VDEV_LABELS; i += 2) {
963 *config = vdev_label_read_config(cb.ubl_vd, i);
968 spa_config_exit(spa, SCL_ALL, FTAG);
972 * On success, increment root zio's count of good writes.
973 * We only get credit for writes to known-visible vdevs; see spa_vdev_add().
976 vdev_uberblock_sync_done(zio_t *zio)
978 uint64_t *good_writes = zio->io_private;
980 if (zio->io_error == 0 && zio->io_vd->vdev_top->vdev_ms_array != 0)
981 atomic_add_64(good_writes, 1);
985 * Write the uberblock to all labels of all leaves of the specified vdev.
988 vdev_uberblock_sync(zio_t *zio, uberblock_t *ub, vdev_t *vd, int flags)
993 for (c = 0; c < vd->vdev_children; c++)
994 vdev_uberblock_sync(zio, ub, vd->vdev_child[c], flags);
996 if (!vd->vdev_ops->vdev_op_leaf)
999 if (!vdev_writeable(vd))
1002 n = ub->ub_txg & (VDEV_UBERBLOCK_COUNT(vd) - 1);
1004 ubbuf = zio_buf_alloc(VDEV_UBERBLOCK_SIZE(vd));
1005 bzero(ubbuf, VDEV_UBERBLOCK_SIZE(vd));
1008 for (l = 0; l < VDEV_LABELS; l++)
1009 vdev_label_write(zio, vd, l, ubbuf,
1010 VDEV_UBERBLOCK_OFFSET(vd, n), VDEV_UBERBLOCK_SIZE(vd),
1011 vdev_uberblock_sync_done, zio->io_private,
1012 flags | ZIO_FLAG_DONT_PROPAGATE);
1014 zio_buf_free(ubbuf, VDEV_UBERBLOCK_SIZE(vd));
1018 vdev_uberblock_sync_list(vdev_t **svd, int svdcount, uberblock_t *ub, int flags)
1020 spa_t *spa = svd[0]->vdev_spa;
1022 uint64_t good_writes = 0;
1025 zio = zio_root(spa, NULL, &good_writes, flags);
1027 for (v = 0; v < svdcount; v++)
1028 vdev_uberblock_sync(zio, ub, svd[v], flags);
1030 (void) zio_wait(zio);
1033 * Flush the uberblocks to disk. This ensures that the odd labels
1034 * are no longer needed (because the new uberblocks and the even
1035 * labels are safely on disk), so it is safe to overwrite them.
1037 zio = zio_root(spa, NULL, NULL, flags);
1039 for (v = 0; v < svdcount; v++)
1040 zio_flush(zio, svd[v]);
1042 (void) zio_wait(zio);
1044 return (good_writes >= 1 ? 0 : EIO);
1048 * On success, increment the count of good writes for our top-level vdev.
1051 vdev_label_sync_done(zio_t *zio)
1053 uint64_t *good_writes = zio->io_private;
1055 if (zio->io_error == 0)
1056 atomic_add_64(good_writes, 1);
1060 * If there weren't enough good writes, indicate failure to the parent.
1063 vdev_label_sync_top_done(zio_t *zio)
1065 uint64_t *good_writes = zio->io_private;
1067 if (*good_writes == 0)
1068 zio->io_error = EIO;
1070 kmem_free(good_writes, sizeof (uint64_t));
1074 * We ignore errors for log and cache devices, simply free the private data.
1077 vdev_label_sync_ignore_done(zio_t *zio)
1079 kmem_free(zio->io_private, sizeof (uint64_t));
1083 * Write all even or odd labels to all leaves of the specified vdev.
1086 vdev_label_sync(zio_t *zio, vdev_t *vd, int l, uint64_t txg, int flags)
1094 for (c = 0; c < vd->vdev_children; c++)
1095 vdev_label_sync(zio, vd->vdev_child[c], l, txg, flags);
1097 if (!vd->vdev_ops->vdev_op_leaf)
1100 if (!vdev_writeable(vd))
1104 * Generate a label describing the top-level config to which we belong.
1106 label = spa_config_generate(vd->vdev_spa, vd, txg, B_FALSE);
1108 vp = zio_buf_alloc(sizeof (vdev_phys_t));
1109 bzero(vp, sizeof (vdev_phys_t));
1111 buf = vp->vp_nvlist;
1112 buflen = sizeof (vp->vp_nvlist);
1114 if (nvlist_pack(label, &buf, &buflen, NV_ENCODE_XDR, KM_PUSHPAGE) == 0) {
1115 for (; l < VDEV_LABELS; l += 2) {
1116 vdev_label_write(zio, vd, l, vp,
1117 offsetof(vdev_label_t, vl_vdev_phys),
1118 sizeof (vdev_phys_t),
1119 vdev_label_sync_done, zio->io_private,
1120 flags | ZIO_FLAG_DONT_PROPAGATE);
1124 zio_buf_free(vp, sizeof (vdev_phys_t));
1129 vdev_label_sync_list(spa_t *spa, int l, uint64_t txg, int flags)
1131 list_t *dl = &spa->spa_config_dirty_list;
1137 * Write the new labels to disk.
1139 zio = zio_root(spa, NULL, NULL, flags);
1141 for (vd = list_head(dl); vd != NULL; vd = list_next(dl, vd)) {
1142 uint64_t *good_writes;
1145 ASSERT(!vd->vdev_ishole);
1147 good_writes = kmem_zalloc(sizeof (uint64_t), KM_PUSHPAGE);
1148 vio = zio_null(zio, spa, NULL,
1149 (vd->vdev_islog || vd->vdev_aux != NULL) ?
1150 vdev_label_sync_ignore_done : vdev_label_sync_top_done,
1151 good_writes, flags);
1152 vdev_label_sync(vio, vd, l, txg, flags);
1156 error = zio_wait(zio);
1159 * Flush the new labels to disk.
1161 zio = zio_root(spa, NULL, NULL, flags);
1163 for (vd = list_head(dl); vd != NULL; vd = list_next(dl, vd))
1166 (void) zio_wait(zio);
1172 * Sync the uberblock and any changes to the vdev configuration.
1174 * The order of operations is carefully crafted to ensure that
1175 * if the system panics or loses power at any time, the state on disk
1176 * is still transactionally consistent. The in-line comments below
1177 * describe the failure semantics at each stage.
1179 * Moreover, vdev_config_sync() is designed to be idempotent: if it fails
1180 * at any time, you can just call it again, and it will resume its work.
1183 vdev_config_sync(vdev_t **svd, int svdcount, uint64_t txg, boolean_t tryhard)
1185 spa_t *spa = svd[0]->vdev_spa;
1186 uberblock_t *ub = &spa->spa_uberblock;
1190 int flags = ZIO_FLAG_CONFIG_WRITER | ZIO_FLAG_CANFAIL;
1193 * Normally, we don't want to try too hard to write every label and
1194 * uberblock. If there is a flaky disk, we don't want the rest of the
1195 * sync process to block while we retry. But if we can't write a
1196 * single label out, we should retry with ZIO_FLAG_TRYHARD before
1197 * bailing out and declaring the pool faulted.
1200 flags |= ZIO_FLAG_TRYHARD;
1202 ASSERT(ub->ub_txg <= txg);
1205 * If this isn't a resync due to I/O errors,
1206 * and nothing changed in this transaction group,
1207 * and the vdev configuration hasn't changed,
1208 * then there's nothing to do.
1210 if (ub->ub_txg < txg &&
1211 uberblock_update(ub, spa->spa_root_vdev, txg) == B_FALSE &&
1212 list_is_empty(&spa->spa_config_dirty_list))
1215 if (txg > spa_freeze_txg(spa))
1218 ASSERT(txg <= spa->spa_final_txg);
1221 * Flush the write cache of every disk that's been written to
1222 * in this transaction group. This ensures that all blocks
1223 * written in this txg will be committed to stable storage
1224 * before any uberblock that references them.
1226 zio = zio_root(spa, NULL, NULL, flags);
1228 for (vd = txg_list_head(&spa->spa_vdev_txg_list, TXG_CLEAN(txg)); vd;
1229 vd = txg_list_next(&spa->spa_vdev_txg_list, vd, TXG_CLEAN(txg)))
1232 (void) zio_wait(zio);
1235 * Sync out the even labels (L0, L2) for every dirty vdev. If the
1236 * system dies in the middle of this process, that's OK: all of the
1237 * even labels that made it to disk will be newer than any uberblock,
1238 * and will therefore be considered invalid. The odd labels (L1, L3),
1239 * which have not yet been touched, will still be valid. We flush
1240 * the new labels to disk to ensure that all even-label updates
1241 * are committed to stable storage before the uberblock update.
1243 if ((error = vdev_label_sync_list(spa, 0, txg, flags)) != 0)
1247 * Sync the uberblocks to all vdevs in svd[].
1248 * If the system dies in the middle of this step, there are two cases
1249 * to consider, and the on-disk state is consistent either way:
1251 * (1) If none of the new uberblocks made it to disk, then the
1252 * previous uberblock will be the newest, and the odd labels
1253 * (which had not yet been touched) will be valid with respect
1254 * to that uberblock.
1256 * (2) If one or more new uberblocks made it to disk, then they
1257 * will be the newest, and the even labels (which had all
1258 * been successfully committed) will be valid with respect
1259 * to the new uberblocks.
1261 if ((error = vdev_uberblock_sync_list(svd, svdcount, ub, flags)) != 0)
1265 * Sync out odd labels for every dirty vdev. If the system dies
1266 * in the middle of this process, the even labels and the new
1267 * uberblocks will suffice to open the pool. The next time
1268 * the pool is opened, the first thing we'll do -- before any
1269 * user data is modified -- is mark every vdev dirty so that
1270 * all labels will be brought up to date. We flush the new labels
1271 * to disk to ensure that all odd-label updates are committed to
1272 * stable storage before the next transaction group begins.
1274 return (vdev_label_sync_list(spa, 1, txg, flags));