4 * The contents of this file are subject to the terms of the
5 * Common Development and Distribution License (the "License").
6 * You may not use this file except in compliance with the License.
8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9 * or http://www.opensolaris.org/os/licensing.
10 * See the License for the specific language governing permissions
11 * and limitations under the License.
13 * When distributing Covered Code, include this CDDL HEADER in each
14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15 * If applicable, add the following below this CDDL HEADER, with the
16 * fields enclosed by brackets "[]" replaced with your own identifying
17 * information: Portions Copyright [yyyy] [name of copyright owner]
23 * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
24 * Copyright 2011 Nexenta Systems, Inc. All rights reserved.
25 * Copyright (c) 2012 by Delphix. All rights reserved.
29 #include <sys/spa_impl.h>
30 #include <sys/nvpair.h>
32 #include <sys/fs/zfs.h>
33 #include <sys/vdev_impl.h>
34 #include <sys/zfs_ioctl.h>
35 #include <sys/utsname.h>
36 #include <sys/systeminfo.h>
37 #include <sys/sunddi.h>
38 #include <sys/zfeature.h>
45 * Pool configuration repository.
47 * Pool configuration is stored as a packed nvlist on the filesystem. By
48 * default, all pools are stored in /etc/zfs/zpool.cache and loaded on boot
49 * (when the ZFS module is loaded). Pools can also have the 'cachefile'
50 * property set that allows them to be stored in an alternate location until
51 * the control of external software.
53 * For each cache file, we have a single nvlist which holds all the
54 * configuration information. When the module loads, we read this information
55 * from /etc/zfs/zpool.cache and populate the SPA namespace. This namespace is
56 * maintained independently in spa.c. Whenever the namespace is modified, or
57 * the configuration of a pool is changed, we call spa_config_sync(), which
58 * walks through all the active pools and writes the configuration to disk.
61 static uint64_t spa_config_generation = 1;
64 * This can be overridden in userland to preserve an alternate namespace for
65 * userland pools when doing testing.
67 char *spa_config_path = ZPOOL_CACHE;
68 int zfs_autoimport_disable = 0;
71 * Called when the module is first loaded, this routine loads the configuration
72 * file into the SPA namespace. It does not actually open or load the pools; it
73 * only populates the namespace.
79 nvlist_t *nvlist, *child;
85 if (zfs_autoimport_disable)
89 * Open the configuration file.
91 pathname = kmem_alloc(MAXPATHLEN, KM_PUSHPAGE);
93 (void) snprintf(pathname, MAXPATHLEN, "%s%s",
94 (rootdir != NULL) ? "./" : "", spa_config_path);
96 file = kobj_open_file(pathname);
98 kmem_free(pathname, MAXPATHLEN);
100 if (file == (struct _buf *)-1)
103 if (kobj_get_filesize(file, &fsize) != 0)
106 buf = kmem_alloc(fsize, KM_PUSHPAGE | KM_NODEBUG);
109 * Read the nvlist from the file.
111 if (kobj_read_file(file, buf, fsize, 0) < 0)
117 if (nvlist_unpack(buf, fsize, &nvlist, KM_PUSHPAGE) != 0)
121 * Iterate over all elements in the nvlist, creating a new spa_t for
122 * each one with the specified configuration.
124 mutex_enter(&spa_namespace_lock);
126 while ((nvpair = nvlist_next_nvpair(nvlist, nvpair)) != NULL) {
127 if (nvpair_type(nvpair) != DATA_TYPE_NVLIST)
130 VERIFY(nvpair_value_nvlist(nvpair, &child) == 0);
132 if (spa_lookup(nvpair_name(nvpair)) != NULL)
134 (void) spa_add(nvpair_name(nvpair), child, NULL);
136 mutex_exit(&spa_namespace_lock);
142 kmem_free(buf, fsize);
144 kobj_close_file(file);
148 spa_config_write(spa_config_dirent_t *dp, nvlist_t *nvl)
153 int oflags = FWRITE | FTRUNC | FCREAT | FOFFMAX;
157 * If the nvlist is empty (NULL), then remove the old cachefile.
160 (void) vn_remove(dp->scd_path, UIO_SYSSPACE, RMFILE);
165 * Pack the configuration into a buffer.
167 VERIFY(nvlist_size(nvl, &buflen, NV_ENCODE_XDR) == 0);
169 buf = kmem_alloc(buflen, KM_PUSHPAGE | KM_NODEBUG);
170 temp = kmem_zalloc(MAXPATHLEN, KM_PUSHPAGE);
172 VERIFY(nvlist_pack(nvl, &buf, &buflen, NV_ENCODE_XDR,
176 * Write the configuration to disk. We need to do the traditional
177 * 'write to temporary file, sync, move over original' to make sure we
178 * always have a consistent view of the data.
180 (void) snprintf(temp, MAXPATHLEN, "%s.tmp", dp->scd_path);
182 if (vn_open(temp, UIO_SYSSPACE, oflags, 0644, &vp, CRCREAT, 0) == 0) {
183 if (vn_rdwr(UIO_WRITE, vp, buf, buflen, 0, UIO_SYSSPACE,
184 0, RLIM64_INFINITY, kcred, NULL) == 0 &&
185 VOP_FSYNC(vp, FSYNC, kcred, NULL) == 0) {
186 (void) vn_rename(temp, dp->scd_path, UIO_SYSSPACE);
188 (void) VOP_CLOSE(vp, oflags, 1, 0, kcred, NULL);
191 (void) vn_remove(temp, UIO_SYSSPACE, RMFILE);
193 kmem_free(buf, buflen);
194 kmem_free(temp, MAXPATHLEN);
198 * Synchronize pool configuration to disk. This must be called with the
199 * namespace lock held.
202 spa_config_sync(spa_t *target, boolean_t removing, boolean_t postsysevent)
204 spa_config_dirent_t *dp, *tdp;
207 ASSERT(MUTEX_HELD(&spa_namespace_lock));
209 if (rootdir == NULL || !(spa_mode_global & FWRITE))
213 * Iterate over all cachefiles for the pool, past or present. When the
214 * cachefile is changed, the new one is pushed onto this list, allowing
215 * us to update previous cachefiles that no longer contain this pool.
217 for (dp = list_head(&target->spa_config_list); dp != NULL;
218 dp = list_next(&target->spa_config_list, dp)) {
220 if (dp->scd_path == NULL)
224 * Iterate over all pools, adding any matching pools to 'nvl'.
227 while ((spa = spa_next(spa)) != NULL) {
228 if (spa == target && removing)
231 mutex_enter(&spa->spa_props_lock);
232 tdp = list_head(&spa->spa_config_list);
233 if (spa->spa_config == NULL ||
234 tdp->scd_path == NULL ||
235 strcmp(tdp->scd_path, dp->scd_path) != 0) {
236 mutex_exit(&spa->spa_props_lock);
241 VERIFY(nvlist_alloc(&nvl, NV_UNIQUE_NAME,
244 VERIFY(nvlist_add_nvlist(nvl, spa->spa_name,
245 spa->spa_config) == 0);
246 mutex_exit(&spa->spa_props_lock);
249 spa_config_write(dp, nvl);
254 * Remove any config entries older than the current one.
256 dp = list_head(&target->spa_config_list);
257 while ((tdp = list_next(&target->spa_config_list, dp)) != NULL) {
258 list_remove(&target->spa_config_list, tdp);
259 if (tdp->scd_path != NULL)
260 spa_strfree(tdp->scd_path);
261 kmem_free(tdp, sizeof (spa_config_dirent_t));
264 spa_config_generation++;
267 spa_event_notify(target, NULL, FM_EREPORT_ZFS_CONFIG_SYNC);
271 * Sigh. Inside a local zone, we don't have access to /etc/zfs/zpool.cache,
272 * and we don't want to allow the local zone to see all the pools anyway.
273 * So we have to invent the ZFS_IOC_CONFIG ioctl to grab the configuration
274 * information for all pool visible within the zone.
277 spa_all_configs(uint64_t *generation)
282 if (*generation == spa_config_generation)
285 VERIFY(nvlist_alloc(&pools, NV_UNIQUE_NAME, KM_PUSHPAGE) == 0);
287 mutex_enter(&spa_namespace_lock);
288 while ((spa = spa_next(spa)) != NULL) {
289 if (INGLOBALZONE(curproc) ||
290 zone_dataset_visible(spa_name(spa), NULL)) {
291 mutex_enter(&spa->spa_props_lock);
292 VERIFY(nvlist_add_nvlist(pools, spa_name(spa),
293 spa->spa_config) == 0);
294 mutex_exit(&spa->spa_props_lock);
297 *generation = spa_config_generation;
298 mutex_exit(&spa_namespace_lock);
304 spa_config_set(spa_t *spa, nvlist_t *config)
306 mutex_enter(&spa->spa_props_lock);
307 if (spa->spa_config != NULL)
308 nvlist_free(spa->spa_config);
309 spa->spa_config = config;
310 mutex_exit(&spa->spa_props_lock);
314 * Generate the pool's configuration based on the current in-core state.
315 * We infer whether to generate a complete config or just one top-level config
316 * based on whether vd is the root vdev.
319 spa_config_generate(spa_t *spa, vdev_t *vd, uint64_t txg, int getstats)
321 nvlist_t *config, *nvroot;
322 vdev_t *rvd = spa->spa_root_vdev;
323 unsigned long hostid = 0;
324 boolean_t locked = B_FALSE;
330 spa_config_enter(spa, SCL_CONFIG | SCL_STATE, FTAG, RW_READER);
333 ASSERT(spa_config_held(spa, SCL_CONFIG | SCL_STATE, RW_READER) ==
334 (SCL_CONFIG | SCL_STATE));
337 * If txg is -1, report the current value of spa->spa_config_txg.
340 txg = spa->spa_config_txg;
342 VERIFY(nvlist_alloc(&config, NV_UNIQUE_NAME, KM_PUSHPAGE) == 0);
344 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_VERSION,
345 spa_version(spa)) == 0);
346 VERIFY(nvlist_add_string(config, ZPOOL_CONFIG_POOL_NAME,
347 spa_name(spa)) == 0);
348 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_POOL_STATE,
349 spa_state(spa)) == 0);
350 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_POOL_TXG,
352 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_POOL_GUID,
353 spa_guid(spa)) == 0);
354 VERIFY(spa->spa_comment == NULL || nvlist_add_string(config,
355 ZPOOL_CONFIG_COMMENT, spa->spa_comment) == 0);
359 hostid = zone_get_hostid(NULL);
362 * We're emulating the system's hostid in userland, so we can't use
365 (void) ddi_strtoul(hw_serial, NULL, 10, &hostid);
368 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_HOSTID,
371 VERIFY(nvlist_add_string(config, ZPOOL_CONFIG_HOSTNAME,
372 utsname.nodename) == 0);
375 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_TOP_GUID,
376 vd->vdev_top->vdev_guid) == 0);
377 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_GUID,
378 vd->vdev_guid) == 0);
379 if (vd->vdev_isspare)
380 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_IS_SPARE,
383 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_IS_LOG,
385 vd = vd->vdev_top; /* label contains top config */
388 * Only add the (potentially large) split information
389 * in the mos config, and not in the vdev labels
391 if (spa->spa_config_splitting != NULL)
392 VERIFY(nvlist_add_nvlist(config, ZPOOL_CONFIG_SPLIT,
393 spa->spa_config_splitting) == 0);
397 * Add the top-level config. We even add this on pools which
398 * don't support holes in the namespace.
400 vdev_top_config_generate(spa, config);
403 * If we're splitting, record the original pool's guid.
405 if (spa->spa_config_splitting != NULL &&
406 nvlist_lookup_uint64(spa->spa_config_splitting,
407 ZPOOL_CONFIG_SPLIT_GUID, &split_guid) == 0) {
408 VERIFY(nvlist_add_uint64(config, ZPOOL_CONFIG_SPLIT_GUID,
412 nvroot = vdev_config_generate(spa, vd, getstats, 0);
413 VERIFY(nvlist_add_nvlist(config, ZPOOL_CONFIG_VDEV_TREE, nvroot) == 0);
417 * Store what's necessary for reading the MOS in the label.
419 VERIFY(nvlist_add_nvlist(config, ZPOOL_CONFIG_FEATURES_FOR_READ,
420 spa->spa_label_features) == 0);
422 if (getstats && spa_load_state(spa) == SPA_LOAD_NONE) {
423 ddt_histogram_t *ddh;
427 ddh = kmem_zalloc(sizeof (ddt_histogram_t), KM_PUSHPAGE);
428 ddt_get_dedup_histogram(spa, ddh);
429 VERIFY(nvlist_add_uint64_array(config,
430 ZPOOL_CONFIG_DDT_HISTOGRAM,
431 (uint64_t *)ddh, sizeof (*ddh) / sizeof (uint64_t)) == 0);
432 kmem_free(ddh, sizeof (ddt_histogram_t));
434 ddo = kmem_zalloc(sizeof (ddt_object_t), KM_PUSHPAGE);
435 ddt_get_dedup_object_stats(spa, ddo);
436 VERIFY(nvlist_add_uint64_array(config,
437 ZPOOL_CONFIG_DDT_OBJ_STATS,
438 (uint64_t *)ddo, sizeof (*ddo) / sizeof (uint64_t)) == 0);
439 kmem_free(ddo, sizeof (ddt_object_t));
441 dds = kmem_zalloc(sizeof (ddt_stat_t), KM_PUSHPAGE);
442 ddt_get_dedup_stats(spa, dds);
443 VERIFY(nvlist_add_uint64_array(config,
444 ZPOOL_CONFIG_DDT_STATS,
445 (uint64_t *)dds, sizeof (*dds) / sizeof (uint64_t)) == 0);
446 kmem_free(dds, sizeof (ddt_stat_t));
450 spa_config_exit(spa, SCL_CONFIG | SCL_STATE, FTAG);
456 * Update all disk labels, generate a fresh config based on the current
457 * in-core state, and sync the global config cache (do not sync the config
458 * cache if this is a booting rootpool).
461 spa_config_update(spa_t *spa, int what)
463 vdev_t *rvd = spa->spa_root_vdev;
467 ASSERT(MUTEX_HELD(&spa_namespace_lock));
469 spa_config_enter(spa, SCL_ALL, FTAG, RW_WRITER);
470 txg = spa_last_synced_txg(spa) + 1;
471 if (what == SPA_CONFIG_UPDATE_POOL) {
472 vdev_config_dirty(rvd);
475 * If we have top-level vdevs that were added but have
476 * not yet been prepared for allocation, do that now.
477 * (It's safe now because the config cache is up to date,
478 * so it will be able to translate the new DVAs.)
479 * See comments in spa_vdev_add() for full details.
481 for (c = 0; c < rvd->vdev_children; c++) {
482 vdev_t *tvd = rvd->vdev_child[c];
483 if (tvd->vdev_ms_array == 0)
484 vdev_metaslab_set_size(tvd);
485 vdev_expand(tvd, txg);
488 spa_config_exit(spa, SCL_ALL, FTAG);
491 * Wait for the mosconfig to be regenerated and synced.
493 txg_wait_synced(spa->spa_dsl_pool, txg);
496 * Update the global config cache to reflect the new mosconfig.
498 if (!spa->spa_is_root)
499 spa_config_sync(spa, B_FALSE, what != SPA_CONFIG_UPDATE_POOL);
501 if (what == SPA_CONFIG_UPDATE_POOL)
502 spa_config_update(spa, SPA_CONFIG_UPDATE_VDEVS);
505 #if defined(_KERNEL) && defined(HAVE_SPL)
506 EXPORT_SYMBOL(spa_config_sync);
507 EXPORT_SYMBOL(spa_config_load);
508 EXPORT_SYMBOL(spa_all_configs);
509 EXPORT_SYMBOL(spa_config_set);
510 EXPORT_SYMBOL(spa_config_generate);
511 EXPORT_SYMBOL(spa_config_update);
513 module_param(spa_config_path, charp, 0444);
514 MODULE_PARM_DESC(spa_config_path, "SPA config file (/etc/zfs/zpool.cache)");
516 module_param(zfs_autoimport_disable, int, 0644);
517 MODULE_PARM_DESC(zfs_autoimport_disable, "Disable pool import at module load");