5 .\" The contents of this file are subject to the terms of the
6 .\" Common Development and Distribution License (the "License").
7 .\" You may not use this file except in compliance with the License.
9 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10 .\" or http://www.opensolaris.org/os/licensing.
11 .\" See the License for the specific language governing permissions
12 .\" and limitations under the License.
14 .\" When distributing Covered Code, include this CDDL HEADER in each
15 .\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16 .\" If applicable, add the following below this CDDL HEADER, with the
17 .\" fields enclosed by brackets "[]" replaced with your own identifying
18 .\" information: Portions Copyright [yyyy] [name of copyright owner]
23 .\" Copyright (c) 2009 Sun Microsystems, Inc. All Rights Reserved.
24 .\" Copyright 2011 Joshua M. Clulow <josh@sysmgr.org>
25 .\" Copyright (c) 2011, 2016 by Delphix. All rights reserved.
26 .\" Copyright (c) 2014, Joyent, Inc. All rights reserved.
27 .\" Copyright 2012 Nexenta Systems, Inc. All Rights Reserved.
28 .\" Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
29 .\" Copyright 2016 Richard Laager. All rights reserved.
31 .TH zfs 8 "May 11, 2016" "ZFS pool 28, filesystem 5" "System Administration Commands"
33 zfs \- configures ZFS file systems
42 \fBzfs\fR \fBcreate\fR [\fB-p\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ... \fIfilesystem\fR
47 \fBzfs\fR \fBcreate\fR [\fB-ps\fR] [\fB-b\fR \fIblocksize\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ... \fB-V\fR \fIsize\fR \fIvolume\fR
52 \fBzfs\fR \fBdestroy\fR [\fB-fnpRrv\fR] \fIfilesystem\fR|\fIvolume\fR
57 \fBzfs\fR \fBdestroy\fR [\fB-dnpRrv\fR] \fIfilesystem\fR|\fIvolume\fR@\fIsnap\fR[%\fIsnap\fR][,...]
62 \fBzfs\fR \fBdestroy\fR \fIfilesystem\fR|\fIvolume\fR#\fIbookmark\fR
67 \fBzfs\fR \fBsnapshot | snap\fR [\fB-r\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ...
68 \fIfilesystem@snapname\fR|\fIvolume@snapname\fR ...
73 \fBzfs\fR \fBrollback\fR [\fB-rRf\fR] \fIsnapshot\fR
78 \fBzfs\fR \fBclone\fR [\fB-p\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ... \fIsnapshot\fR \fIfilesystem\fR|\fIvolume\fR
83 \fBzfs\fR \fBpromote\fR \fIclone-filesystem\fR
88 \fBzfs\fR \fBrename\fR [\fB-f\fR] \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR
89 \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR
94 \fBzfs\fR \fBrename\fR [\fB-fp\fR] \fIfilesystem\fR|\fIvolume\fR \fIfilesystem\fR|\fIvolume\fR
99 \fBzfs\fR \fBrename\fR \fB-r\fR \fIsnapshot\fR \fIsnapshot\fR
104 \fBzfs\fR \fBlist\fR [\fB-r\fR|\fB-d\fR \fIdepth\fR][\fB-Hp\fR][\fB-o\fR \fIproperty\fR[,\fIproperty\fR]...] [\fB-t\fR \fItype\fR[,\fItype\fR]..]
105 [\fB-s\fR \fIproperty\fR] ... [\fB-S\fR \fIproperty\fR] ... [\fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR|\fImountpoint\fR] ...
110 \fBzfs\fR \fBset\fR \fIproperty\fR=\fIvalue\fR... \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR...
115 \fBzfs\fR \fBget\fR [\fB-r\fR|\fB-d\fR \fIdepth\fR][\fB-Hp\fR][\fB-o\fR \fIfield\fR[,...]] [\fB-t\fR \fItype\fR[,...]]
116 [\fB-s\fR \fIsource\fR[,...]] "\fIall\fR" | \fIproperty\fR[,...] \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR|\fImountpoint\fR ...
121 \fBzfs\fR \fBinherit\fR [\fB-rS\fR] \fIproperty\fR \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR ...
126 \fBzfs\fR \fBupgrade\fR [\fB-v\fR]
131 \fBzfs\fR \fBupgrade\fR [\fB-r\fR] [\fB-V\fR \fIversion\fR] \fB-a\fR | \fIfilesystem\fR
136 \fBzfs\fR \fBuserspace\fR [\fB-Hinp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-s\fR \fIfield\fR] ...
137 [\fB-S\fR \fIfield\fR] ... [\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
142 \fBzfs\fR \fBgroupspace\fR [\fB-Hinp\fR] [\fB-o\fR \fIfield\fR[,...]] [\fB-s\fR \fIfield\fR] ...
143 [\fB-S\fR \fIfield\fR] ... [\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
148 \fBzfs\fR \fBmount\fR
153 \fBzfs\fR \fBmount\fR [\fB-vO\fR] [\fB-o \fIoptions\fR\fR] \fB-a\fR | \fIfilesystem\fR
158 \fBzfs\fR \fBunmount | umount\fR [\fB-f\fR] \fB-a\fR | \fIfilesystem\fR|\fImountpoint\fR
163 \fBzfs\fR \fBshare\fR [\fBnfs\fR|\fBsmb\fR] \fB-a\fR | \fIfilesystem\fR
168 \fBzfs\fR \fBunshare\fR [\fBnfs\fR|\fBsmb\fR] \fB-a\fR | \fIfilesystem\fR|\fImountpoint\fR
173 \fBzfs\fR \fBbookmark\fR \fIsnapshot\fR \fIbookmark\fR
178 \fBzfs\fR \fBsend\fR [\fB-DnPpRveLc\fR] [\fB-\fR[\fBiI\fR] \fIsnapshot\fR] \fIsnapshot\fR
183 \fBzfs\fR \fBsend\fR [\fB-Le\fR] [\fB-i \fIsnapshot\fR|\fIbookmark\fR]\fR \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR
188 \fBzfs\fR \fBsend\fR [\fB-Penv\fR] \fB-t\fR \fIreceive_resume_token\fR
193 \fBzfs\fR \fBreceive\fR [\fB-Fnsuv\fR] [\fB-o origin\fR=\fIsnapshot\fR] \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR
198 \fBzfs\fR \fBreceive\fR [\fB-Fnsuv\fR] [\fB-d\fR|\fB-e\fR] [\fB-o origin\fR=\fIsnapshot\fR] \fIfilesystem\fR
203 \fBzfs\fR \fBreceive\fR \fB-A\fR \fIfilesystem\fR|\fIvolume\fR
208 \fBzfs\fR \fBallow\fR \fIfilesystem\fR|\fIvolume\fR
213 \fBzfs\fR \fBallow\fR [\fB-ldug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...] \fIperm\fR|\fI@setname\fR[,...]
214 \fIfilesystem\fR|\fIvolume\fR
219 \fBzfs\fR \fBallow\fR [\fB-ld\fR] \fB-e\fR \fIperm\fR|@\fIsetname\fR[,...] \fIfilesystem\fR|\fIvolume\fR
224 \fBzfs\fR \fBallow\fR \fB-c\fR \fIperm\fR|@\fIsetname\fR[,...] \fIfilesystem\fR|\fIvolume\fR
229 \fBzfs\fR \fBallow\fR \fB-s\fR @\fIsetname\fR \fIperm\fR|@\fIsetname\fR[,...] \fIfilesystem\fR|\fIvolume\fR
234 \fBzfs\fR \fBunallow\fR [\fB-rldug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...] [\fIperm\fR|@\fIsetname\fR[,... ]]
235 \fIfilesystem\fR|\fIvolume\fR
240 \fBzfs\fR \fBunallow\fR [\fB-rld\fR] \fB-e\fR [\fIperm\fR|@\fIsetname\fR[,... ]] \fIfilesystem\fR|\fIvolume\fR
245 \fBzfs\fR \fBunallow\fR [\fB-r\fR] \fB-c\fR [\fIperm\fR|@\fIsetname\fR[ ... ]] \fIfilesystem\fR|\fIvolume\fR
250 \fBzfs\fR \fBunallow\fR [\fB-r\fR] \fB-s\fR @\fIsetname\fR [\fIperm\fR|@\fIsetname\fR[,... ]] \fIfilesystem\fR|\fIvolume\fR
255 \fBzfs\fR \fBhold\fR [\fB-r\fR] \fItag\fR \fIsnapshot\fR...
260 \fBzfs\fR \fBholds\fR [\fB-r\fR] \fIsnapshot\fR...
265 \fBzfs\fR \fBrelease\fR [\fB-r\fR] \fItag\fR \fIsnapshot\fR...
270 \fBzfs\fR \fBdiff\fR [\fB-FHt\fR] \fIsnapshot\fR \fIsnapshot\fR|\fIfilesystem\fR
274 The \fBzfs\fR command configures \fBZFS\fR datasets within a \fBZFS\fR storage pool, as described in \fBzpool\fR(8). A dataset is identified by a unique path within the \fBZFS\fR namespace. For example:
278 pool/{filesystem,volume,snapshot}
285 where the maximum length of a dataset name is \fBMAXNAMELEN\fR (256 bytes).
288 A dataset can be one of the following:
292 \fB\fIfilesystem\fR\fR
296 A \fBZFS\fR dataset of type \fBfilesystem\fR can be mounted within the standard system namespace and behaves like other file systems. While \fBZFS\fR file systems are designed to be \fBPOSIX\fR compliant, known issues exist that prevent compliance in some cases. Applications that depend on standards conformance might fail due to nonstandard behavior when checking file system free space.
306 A logical volume exported as a raw or block device. This type of dataset should only be used under special circumstances. File systems are typically used in most environments.
316 A read-only version of a file system or volume at a given point in time. It is specified as \fIfilesystem@name\fR or \fIvolume@name\fR.
326 Much like a \fIsnapshot\fR, but without the hold on on-disk data. It can be used as the source of a send (but not for a receive).
327 It is specified as \fIfilesystem#name\fR or \fIvolume#name\fR.
330 .SS "ZFS File System Hierarchy"
332 A \fBZFS\fR storage pool is a logical collection of devices that provide space for datasets. A storage pool is also the root of the \fBZFS\fR file system hierarchy.
335 The root of the pool can be accessed as a file system, such as mounting and unmounting, taking snapshots, and setting properties. The physical storage characteristics, however, are managed by the \fBzpool\fR(8) command.
338 See \fBzpool\fR(8) for more information on creating and administering pools.
341 A snapshot is a read-only copy of a file system or volume. Snapshots can be created extremely quickly, and initially consume no additional space within the pool. As data within the active dataset changes, the snapshot consumes more data than would otherwise be shared with the active dataset.
344 Snapshots can have arbitrary names. Snapshots of volumes can be cloned or rolled back. Visibility is determined by the \fBsnapdev\fR property of the parent volume.
347 File system snapshots can be accessed under the \fB\&.zfs/snapshot\fR directory in the root of the file system. Snapshots are automatically mounted on demand and may be unmounted at regular intervals. The visibility of the \fB\&.zfs\fR directory can be controlled by the \fBsnapdir\fR property.
350 A bookmark is like a snapshot, a read-only copy of a file system or volume. Bookmarks can be created extremely quickly, compared to snapshots, and they consume no additional space within the pool. Bookmarks can also have arbitrary names, much like snapshots.
353 Unlike snapshots, bookmarks can not be accessed through the filesystem in any way. From a storage standpoint a bookmark just provides a way to reference when a snapshot was created as a distinct object. Bookmarks are initially tied to a snapshot, not the filesystem/volume, and they will survive if the snapshot itself is destroyed. Since they are very light weight there's little incentive to destroy them.
356 A clone is a writable volume or file system whose initial contents are the same as another dataset. As with snapshots, creating a clone is nearly instantaneous, and initially consumes no additional space.
359 Clones can only be created from a snapshot. When a snapshot is cloned, it creates an implicit dependency between the parent and child. Even though the clone is created somewhere else in the dataset hierarchy, the original snapshot cannot be destroyed as long as a clone exists. The \fBorigin\fR property exposes this dependency, and the \fBdestroy\fR command lists any such dependencies, if they exist.
362 The clone parent-child dependency relationship can be reversed by using the \fBpromote\fR subcommand. This causes the "origin" file system to become a clone of the specified file system, which makes it possible to destroy the file system that the clone was created from.
365 Creating a \fBZFS\fR file system is a simple operation, so the number of file systems per system is likely to be numerous. To cope with this, \fBZFS\fR automatically manages mounting and unmounting file systems without the need to edit the \fB/etc/fstab\fR file. All automatically managed file systems are mounted by \fBZFS\fR at boot time.
368 By default, file systems are mounted under \fB/\fIpath\fR\fR, where \fIpath\fR is the name of the file system in the \fBZFS\fR namespace. Directories are created and destroyed as needed.
371 A file system can also have a mount point set in the \fBmountpoint\fR property. This directory is created as needed, and \fBZFS\fR automatically mounts the file system when the \fBzfs mount -a\fR command is invoked (without editing \fB/etc/fstab\fR). The \fBmountpoint\fR property can be inherited, so if \fBpool/home\fR has a mount point of \fB/export/stuff\fR, then \fBpool/home/user\fR automatically inherits a mount point of \fB/export/stuff/user\fR.
374 A file system \fBmountpoint\fR property of \fBnone\fR prevents the file system from being mounted.
377 If needed, \fBZFS\fR file systems can also be managed with traditional tools (\fBmount\fR, \fBumount\fR, \fB/etc/fstab\fR). If a file system's mount point is set to \fBlegacy\fR, \fBZFS\fR makes no attempt to manage the file system, and the administrator is responsible for mounting and unmounting the file system.
380 Deduplication is the process for removing redundant data at the block-level, reducing the total amount of data stored. If a file system has the \fBdedup\fR property enabled, duplicate data blocks are removed synchronously. The result is that only unique data is stored and common components are shared among files.
382 \fBWARNING: DO NOT ENABLE DEDUPLICATION UNLESS YOU NEED IT AND KNOW EXACTLY WHAT YOU ARE DOING!\fR
384 Deduplicating data is a very resource-intensive operation. It is generally recommended that you have \fIat least\fR 1.25 GiB of RAM per 1 TiB of storage when you enable deduplication. But calculating the exact requirements is a somewhat complicated affair.
386 Enabling deduplication on an improperly-designed system will result in extreme performance issues (extremely slow filesystem and snapshot deletions etc.) and can potentially lead to data loss (i.e. unimportable pool due to memory exhaustion) if your system is not built for this purpose. Deduplication affects the processing power (CPU), disks (and the controller) as well as primary (real) memory.
388 Before creating a pool with deduplication enabled, ensure that you have planned your hardware requirements appropriately and implemented appropriate recovery practices, such as regular backups.
390 Unless necessary, deduplication should NOT be enabled on a system. Instead, consider using \fIcompression=lz4\fR, as a less resource-intensive alternative.
394 Properties are divided into two types: native properties and user-defined (or "user") properties. Native properties either export internal statistics or control \fBZFS\fR behavior. User properties have no effect on \fBZFS\fR behavior, but you can use them to annotate datasets and snapshots in a way that is meaningful in your environment.
397 Properties are generally inherited from the parent unless overridden by the child. See the documentation below for exceptions.
400 .SS "Native Properties"
401 Native properties apply to all dataset types unless otherwise noted. However, native properties cannot be edited on snapshots.
404 The values of numeric native properties can be specified using human-readable abbreviations (\fBK\fR, \fBM\fR, \fBG\fR, \fBT\fR, \fBP\fR, \fBE\fR, and \fBZ\fR). These abbreviations can optionally use the IEC binary prefixes (e.g. GiB) or SI decimal prefixes (e.g. GB), though the SI prefixes are treated as binary prefixes. Abbreviations are case-insensitive. The following are all valid (and equal) specifications:
408 1536M, 1.5g, 1.50GB, 1.5GiB
415 The values of non-numeric native properties are case-sensitive and must be lowercase, except for \fBmountpoint\fR, \fBsharenfs\fR, and \fBsharesmb\fR.
418 The following native properties consist of read-only statistics about the dataset. These properties can be neither set, nor inherited.
422 \fB\fBavailable\fR\fR
426 The amount of space available to the dataset and all its children, assuming that there is no other activity in the pool. Because space is shared within a pool, availability can be limited by any number of factors, including physical pool size, quotas, reservations, or other datasets within the pool.
428 This property can also be referred to by its shortened column name, \fBavail\fR.
434 \fB\fBcompressratio\fR\fR
438 For non-snapshots, the compression ratio achieved for the \fBused\fR space of this dataset, expressed as a multiplier. The \fBused\fR property includes descendant datasets, and, for clones, does not include the space shared with the origin snapshot. For snapshots, the \fBcompressratio\fR is the same as the \fBrefcompressratio\fR property. The \fBcompression\fR property controls whether compression is enabled on a dataset.
448 The time this dataset was created.
458 For snapshots, this property is a comma-separated list of filesystems or
459 volumes which are clones of this snapshot. The clones' \fBorigin\fR property
460 is this snapshot. If the \fBclones\fR property is not empty, then this
461 snapshot can not be destroyed (even with the \fB-r\fR or \fB-f\fR options). The
462 roles of origin and clone can be swapped by promoting the clone with the
463 \fBzfs promote\fR command.
469 \fB\fBdefer_destroy\fR\fR
473 This property is \fBon\fR if the snapshot has been marked for deferred destruction by using the \fBzfs destroy\fR \fB-d\fR command. Otherwise, the property is \fBoff\fR.
479 \fB\fBfilesystem_count\fR
483 The total number of filesystems and volumes that exist under this location in the
484 dataset tree. This value is only available when a \fBfilesystem_limit\fR has
485 been set somewhere in the tree under which the dataset resides.
491 \fB\fBlogicalreferenced\fR\fR
495 The amount of space that is "logically" accessible by this dataset. See
496 the \fBreferenced\fR property. The logical space ignores the effect of
497 the \fBcompression\fR and \fBcopies\fR properties, giving a quantity
498 closer to the amount of data that applications see. However, it does
499 include space consumed by metadata.
501 This property can also be referred to by its shortened column name,
508 \fB\fBlogicalused\fR\fR
512 The amount of space that is "logically" consumed by this dataset and all
513 its descendents. See the \fBused\fR property. The logical space
514 ignores the effect of the \fBcompression\fR and \fBcopies\fR properties,
515 giving a quantity closer to the amount of data that applications see.
516 However, it does include space consumed by metadata.
518 This property can also be referred to by its shortened column name,
529 For file systems, indicates whether the file system is currently mounted. This property can be either \fByes\fR or \fBno\fR.
539 For cloned file systems or volumes, the snapshot from which the clone was created. The origin cannot be destroyed (even with the \fB-r\fR or \fB-f\fR options) so long as a clone exists. See also the \fBclones\fR property.
545 \fB\fBreceive_resume_token\fR\fR
549 For filesystems or volumes which have saved partially-completed state from \fBzfs receive -s\fR , this opaque token can be provided to \fBzfs send -t\fR to resume and complete the \fBzfs receive\fR.
556 \fB\fBreferenced\fR\fR
560 The amount of data that is accessible by this dataset, which may or may not be shared with other datasets in the pool. When a snapshot or clone is created, it initially references the same amount of space as the file system or snapshot it was created from, since its contents are identical.
562 This property can also be referred to by its shortened column name, \fBrefer\fR.
568 \fB\fBrefcompressratio\fR\fR
572 The compression ratio achieved for the \fBreferenced\fR space of this
573 dataset, expressed as a multiplier. See also the \fBcompressratio\fR
580 \fB\fBsnapshot_count\fR
584 The total number of snapshots that exist under this location in the dataset tree.
585 This value is only available when a \fBsnapshot_limit\fR has been set somewhere
586 in the tree under which the dataset resides.
596 The type of dataset: \fBfilesystem\fR, \fBvolume\fR, or \fBsnapshot\fR.
606 The amount of space consumed by this dataset and all its descendents. This is the value that is checked against this dataset's quota and reservation. The space used does not include this dataset's reservation, but does take into account the reservations of any descendent datasets. The amount of space that a dataset consumes from its parent, as well as the amount of space that is freed if this dataset is recursively destroyed, is the greater of its space used and its reservation.
608 The used space of a snapshot (see the "Snapshots" section) is space that is referenced exclusively by this snapshot. If this snapshot is destroyed, the amount of \fBused\fR space will be freed. Space that is shared by multiple snapshots isn't accounted for in this metric. When a snapshot is destroyed, space that was previously shared with this snapshot can become unique to snapshots adjacent to it, thus changing the used space of those snapshots. The used space of the latest snapshot can also be affected by changes in the file system. Note that the \fBused\fR space of a snapshot is a subset of the \fBwritten\fR space of the snapshot.
610 The amount of space used, available, or referenced does not take into account pending changes. Pending changes are generally accounted for within a few seconds. Committing a change to a disk using \fBfsync\fR(2) or \fBO_SYNC\fR (see \fBopen\fR(2)) does not necessarily guarantee that the space usage information is updated immediately.
620 The \fBusedby*\fR properties decompose the \fBused\fR properties into the various reasons that space is used. Specifically, \fBused\fR = \fBusedbychildren\fR + \fBusedbydataset\fR + \fBusedbyrefreservation\fR + \fBusedbysnapshots\fR. These properties are only available for datasets created on \fBzpool\fR version 13 or higher pools.
626 \fB\fBusedbychildren\fR\fR
630 The amount of space used by children of this dataset, which would be freed if all the dataset's children were destroyed.
636 \fB\fBusedbydataset\fR\fR
640 The amount of space used by this dataset itself, which would be freed if the dataset were destroyed (after first removing any \fBrefreservation\fR and destroying any necessary snapshots or descendents).
646 \fB\fBusedbyrefreservation\fR\fR
650 The amount of space used by a \fBrefreservation\fR set on this dataset, which would be freed if the \fBrefreservation\fR was removed.
656 \fB\fBusedbysnapshots\fR\fR
660 The amount of space consumed by snapshots of this dataset. In particular, it is the amount of space that would be freed if all of this dataset's snapshots were destroyed. Note that this is not simply the sum of the snapshots' \fBused\fR properties because space can be shared by multiple snapshots.
666 \fB\fBuserobjused@\fR\fIuser\fR\fR
668 \fB\fBuserused@\fR\fIuser\fR\fR
672 The amount of space consumed by the specified user in this dataset. Space is charged to the owner of each file, as displayed by \fBls\fR \fB-l\fR. The amount of space charged is displayed by \fBdu\fR and \fBls\fR \fB-s\fR. See the \fBzfs userspace\fR subcommand for more information.
674 Unprivileged users can access only their own space usage. The root user, or a user who has been granted the \fBuserused\fR privilege with \fBzfs allow\fR, can access everyone's usage.
676 The \fBuserused@\fR... properties are not displayed by \fBzfs get all\fR. The user's name must be appended after the \fB@\fR symbol, using one of the following forms:
681 \fIPOSIX name\fR (for example, \fBjoe\fR)
687 \fIPOSIX numeric ID\fR (for example, \fB789\fR)
693 \fISID name\fR (for example, \fBjoe.smith@mydomain\fR)
699 \fISID numeric ID\fR (for example, \fBS-1-123-456-789\fR)
702 Files created on Linux always have POSIX owners.
705 The \fBuserobjused\fR is similar to \fBuserused\fR but instead it counts the number of objects consumed by \fIuser\fR. This feature doesn't count the internal objects used by ZFS, therefore it may under count a few objects comparing with the results of third-party tool such as \fBdfs -i\fR.
706 When the property \fBxattr=on\fR is set on a fileset, ZFS will create additional objects per-file to store extended attributes. These additional objects are reflected in the \fBuserobjused\fR value and are counted against the user's \fBuserobjquota\fR. When a filesystem is configured to use \fBxattr=sa\fR no additional internal objects are required.
716 This property is set to the number of user holds on this snapshot. User holds are set by using the \fBzfs hold\fR command.
722 \fB\fBgroupused@\fR\fIgroup\fR\fR
724 \fB\fBgroupobjused@\fR\fIgroup\fR\fR
728 The amount of space consumed by the specified group in this dataset. Space is charged to the group of each file, as displayed by \fBls\fR \fB-l\fR. See the \fBuserused@\fR\fIuser\fR property for more information.
730 Unprivileged users can only access their own groups' space usage. The root user, or a user who has been granted the \fBgroupused\fR privilege with \fBzfs allow\fR, can access all groups' usage.
734 The \fBgroupobjused\fR is similar to \fBgroupused\fR but instead it counts the number of objects consumed by \fIgroup\fR.
735 When the property \fBxattr=on\fR is set on a fileset, ZFS will create additional objects per-file to store extended attributes. These additional objects are reflected in the \fBgroupobjused\fR value and are counted against the group's \fBgroupobjquota.\fR. When a filesystem is configured to use \fBxattr=sa\fR no additional internal objects are required.
741 \fB\fBvolblocksize\fR=\fIblocksize\fR\fR
745 This property, which is only valid on volumes, specifies the block size of the volume. Any power of two from 512B to 128KiB is valid. The default is 8KiB.
747 This property cannot be changed after the volume is created.
749 This property can also be referred to by its shortened column name, \fBvolblock\fR.
759 The amount of space \fBreferenced\fR by this dataset, that was written since the previous snapshot
760 (i.e. that is not referenced by the previous snapshot).
766 \fB\fBwritten@\fR\fIsnapshot\fR\fR
770 The amount of \fBreferenced\fR space written to this dataset since the
771 specified snapshot. This is the space that is referenced by this dataset
772 but was not referenced by the specified snapshot.
774 The \fIsnapshot\fR may be specified as a short snapshot name (just the part
775 after the \fB@\fR), in which case it will be interpreted as a snapshot in
776 the same filesystem as this dataset.
777 The \fIsnapshot\fR be a full snapshot name (\fIfilesystem\fR@\fIsnapshot\fR),
778 which for clones may be a snapshot in the origin's filesystem (or the origin
779 of the origin's filesystem, etc).
784 The following native properties can be used to change the behavior of a \fBZFS\fR dataset.
788 \fB\fBaclinherit\fR=\fBrestricted\fR | \fBdiscard\fR | \fBnoallow\fR | \fBpassthrough\fR | \fBpassthrough-x\fR\fR
792 Controls how \fBACL\fR entries are inherited when files and directories are created. A file system with an \fBaclinherit\fR property of \fBdiscard\fR does not inherit any \fBACL\fR entries. A file system with an \fBaclinherit\fR property value of \fBnoallow\fR only inherits inheritable \fBACL\fR entries that specify "deny" permissions. The property value \fBrestricted\fR (the default) removes the \fBwrite_acl\fR and \fBwrite_owner\fR permissions when the \fBACL\fR entry is inherited. A file system with an \fBaclinherit\fR property value of \fBpassthrough\fR inherits all inheritable \fBACL\fR entries without any modifications made to the \fBACL\fR entries when they are inherited. A file system with an \fBaclinherit\fR property value of \fBpassthrough-x\fR has the same meaning as \fBpassthrough\fR, except that the \fBowner@\fR, \fBgroup@\fR, and \fBeveryone@\fR \fBACE\fRs inherit the execute permission only if the file creation mode also requests the execute bit.
794 When the property value is set to \fBpassthrough\fR, files are created with a mode determined by the inheritable \fBACE\fRs. If no inheritable \fBACE\fRs exist that affect the mode, then the mode is set in accordance to the requested mode from the application.
796 The \fBaclinherit\fR property does not apply to Posix ACLs.
802 \fB\fBacltype\fR=\fBoff\fR | \fBnoacl\fR | \fBposixacl\fR \fR
806 Controls whether ACLs are enabled and if so what type of ACL to use. When
807 a file system has the \fBacltype\fR property set to \fBoff\fR (the default)
808 then ACLs are disabled. Setting the \fBacltype\fR property to \fBposixacl\fR
809 indicates Posix ACLs should be used. Posix ACLs are specific to Linux and
810 are not functional on other platforms. Posix ACLs are stored as an xattr and
811 therefore will not overwrite any existing ZFS/NFSv4 ACLs which may be set.
812 Currently only \fBposixacls\fR are supported on Linux.
814 To obtain the best performance when setting \fBposixacl\fR users are strongly
815 encouraged to set the \fBxattr=sa\fR property. This will result in the
816 Posix ACL being stored more efficiently on disk. But as a consequence of this
817 all new xattrs will only be accessible from ZFS implementations which support
818 the \fBxattr=sa\fR property. See the \fBxattr\fR property for more details.
820 The value \fBnoacl\fR is an alias for \fBoff\fR.
826 \fB\fBatime\fR=\fBon\fR | \fBoff\fR\fR
830 Controls whether the access time for files is updated when they are read. Setting this property to \fBoff\fR avoids producing write traffic when reading files and can result in significant performance gains, though it might confuse mailers and other similar utilities. The default value is \fBon\fR. See also \fBrelatime\fR below.
832 The values \fBon\fR and \fBoff\fR are equivalent to the \fBatime\fR and \fBnoatime\fR mount options.
838 \fB\fBcanmount\fR=\fBon\fR | \fBoff\fR | \fBnoauto\fR\fR
842 If this property is set to \fBoff\fR, the file system cannot be mounted, and is ignored by \fBzfs mount -a\fR. Setting this property to \fBoff\fR is similar to setting the \fBmountpoint\fR property to \fBnone\fR, except that the dataset still has a normal \fBmountpoint\fR property, which can be inherited. Setting this property to \fBoff\fR allows datasets to be used solely as a mechanism to inherit properties. One example of setting \fBcanmount=\fR\fBoff\fR is to have two datasets with the same \fBmountpoint\fR, so that the children of both datasets appear in the same directory, but might have different inherited characteristics.
844 When the \fBnoauto\fR option is set, a dataset can only be mounted and unmounted explicitly. The dataset is not mounted automatically when the dataset is created or imported, nor is it mounted by the \fBzfs mount -a\fR command or unmounted by the \fBzfs unmount -a\fR command.
846 This property is not inherited. Every dataset defaults to \fBon\fR independently.
848 The values \fBon\fR and \fBnoauto\fR are equivalent to the \fBauto\fR and \fBnoauto\fR mount options.
854 \fB\fBchecksum\fR=\fBon\fR | \fBoff\fR | \fBfletcher2\fR | \fBfletcher4\fR | \fBsha256\fR | \fBnoparity\fR | \fBsha512\fR | \fBskein\fR | \fBedonr\fR\fR
858 Controls the checksum used to verify data integrity. The default value is
859 \fBon\fR, which automatically selects an appropriate algorithm (currently,
860 \fBfletcher4\fR, but this may change in future releases). The value \fBoff\fR
861 disables integrity checking on user data. The value \fBnoparity\fR not only
862 disables integrity but also disables maintaining parity for user data.
863 This setting is used internally by a dump device residing on a RAID-Z pool and
864 should not be used by any other dataset. Disabling checksums is \fBNOT\fR a
865 recommended practice.
867 The \fBsha512\fR, \fBskein\fR, and \fBedonr\fR checksum algorithms require
868 enabling the appropriate features on the pool. Please see zpool-features for
869 more information on these algorithms.
871 Changing this property affects only newly-written data.
877 \fB\fBcompression\fR=\fBoff\fR | \fBon\fR | \fBlzjb\fR | \fBlz4\fR |
878 \fBgzip\fR | \fBgzip-\fR\fIN\fR | \fBzle\fR\fR
882 Controls the compression algorithm used for this dataset.
884 Setting compression to \fBon\fR indicates that the current default
885 compression algorithm should be used. The default balances compression
886 and decompression speed, with compression ratio and is expected to
887 work well on a wide variety of workloads. Unlike all other settings for
888 this property, \fBon\fR does not select a fixed compression type. As
889 new compression algorithms are added to ZFS and enabled on a pool, the
890 default compression algorithm may change. The current default compression
891 algorithm is either \fBlzjb\fR or, if the \fBlz4_compress\fR feature is
894 The \fBlzjb\fR compression algorithm is optimized for performance while
895 providing decent data compression.
897 The \fBlz4\fR compression algorithm is a high-performance replacement
898 for the \fBlzjb\fR algorithm. It features significantly faster
899 compression and decompression, as well as a moderately higher
900 compression ratio than \fBlzjb\fR, but can only be used on pools with
901 the \fBlz4_compress\fR feature set to \fIenabled\fR. See
902 \fBzpool-features\fR(5) for details on ZFS feature flags and the
903 \fBlz4_compress\fR feature.
905 The \fBgzip\fR compression algorithm uses the same compression as
906 the \fBgzip\fR(1) command. You can specify the \fBgzip\fR level by using the
907 value \fBgzip-\fR\fIN\fR where \fIN\fR is an integer from 1 (fastest) to 9
908 (best compression ratio). Currently, \fBgzip\fR is equivalent to \fBgzip-6\fR
909 (which is also the default for \fBgzip\fR(1)). The \fBzle\fR compression
910 algorithm compresses runs of zeros.
912 This property can also be referred to by its shortened column name
913 \fBcompress\fR. Changing this property affects only newly-written data.
919 \fB\fBcopies\fR=\fB1\fR | \fB2\fR | \fB3\fR\fR
923 Controls the number of copies of data stored for this dataset. These copies are in addition to any redundancy provided by the pool, for example, mirroring or RAID-Z. The copies are stored on different disks, if possible. The space used by multiple copies is charged to the associated file and dataset, changing the \fBused\fR property and counting against quotas and reservations.
925 Changing this property only affects newly-written data.
927 Remember that \fBZFS\fR will not import a pool with a missing top-level vdev. Do NOT create, for example, a two-disk, striped pool and set \fBcopies=\fR\fI2\fR on some datasets thinking you have setup redundancy for them. When one disk dies, you will not be able to import the pool and will have lost all of your data.
933 \fB\fBdedup\fR=\fBoff\fR | \fBon\fR | \fBverify\fR | \fBsha256\fR[,\fBverify\fR]\fR
937 Controls whether deduplication is in effect for a dataset. The default value is \fBoff\fR. The default checksum used for deduplication is \fBsha256\fR (subject to change). When \fBdedup\fR is enabled, the \fBdedup\fR checksum algorithm overrides the \fBchecksum\fR property. Setting the value to \fBverify\fR is equivalent to specifying \fBsha256,verify\fR.
939 If the property is set to \fBverify\fR, then, whenever two blocks have the same signature, ZFS will do a byte-for-byte comparison with the existing block to ensure that the contents are identical.
941 Unless necessary, deduplication should NOT be enabled on a system. See \fBDeduplication\fR above.
947 \fB\fBdevices\fR=\fBon\fR | \fBoff\fR\fR
951 Controls whether device nodes can be opened on this file system. The default value is \fBon\fR.
953 The values \fBon\fR and \fBoff\fR are equivalent to the \fBdev\fR and \fBnodev\fR mount options.
959 \fB\fBdnodesize\fR=\fBlegacy\fR | \fBauto\fR | \fB1k\fR | \fB2k\fR | \fB4k\fR | \fB8k\fR | \fB16k\fR\fR
963 Specifies a compatibility mode or literal value for the size of dnodes
964 in the file system. The default value is \fBlegacy\fR. Setting this
965 property to a value other than \fBlegacy\fR requires the
966 \fBlarge_dnode\fR pool feature to be enabled.
968 Consider setting \fBdnodesize\fR to \fBauto\fR if the dataset uses the
969 \fBxattr=sa\fR property setting and the workload makes heavy use of
970 extended attributes. This may be applicable to SELinux-enabled systems,
971 Lustre servers, and Samba servers, for example. Literal values are
972 supported for cases where the optimal size is known in advance and for
975 Leave \fBdnodesize\fR set to \fBlegacy\fR if you need to receive
976 a \fBzfs send\fR stream of this dataset on a pool that doesn't enable
977 the \fBlarge_dnode\fR feature, or if you need to import this pool on a
978 system that doesn't support the \fBlarge_dnode\fR feature.
980 This property can also be referred to by its shortened column name,
988 \fB\fBexec\fR=\fBon\fR | \fBoff\fR\fR
992 Controls whether processes can be executed from within this file system. The default value is \fBon\fR.
994 The values \fBon\fR and \fBoff\fR are equivalent to the \fBexec\fR and \fBnoexec\fR mount options.
1000 \fB\fBmlslabel\fR=\fBnone\fR\fR | \fIlabel\fR
1004 The \fBmlslabel\fR property is a sensitivity label that determines if a dataset can be mounted in a zone on a system with Trusted Extensions enabled. If the labeled dataset matches the labeled zone, the dataset can be mounted and accessed from the labeled zone.
1006 When the \fBmlslabel\fR property is not set, the default value is \fBnone\fR. Setting the \fBmlslabel\fR property to \fBnone\fR is equivalent to removing the property.
1008 The \fBmlslabel\fR property can be modified only when Trusted Extensions is enabled and only with appropriate privilege. Rights to modify it cannot be delegated. When changing a label to a higher label or setting the initial dataset label, the \fB{PRIV_FILE_UPGRADE_SL}\fR privilege is required. When changing a label to a lower label or the default (\fBnone\fR), the \fB{PRIV_FILE_DOWNGRADE_SL}\fR privilege is required. Changing the dataset to labels other than the default can be done only when the dataset is not mounted. When a dataset with the default label is mounted into a labeled-zone, the mount operation automatically sets the \fBmlslabel\fR property to the label of that zone.
1010 When Trusted Extensions is \fBnot\fR enabled, only datasets with the default label (\fBnone\fR) can be mounted.
1012 Zones are a Solaris feature and are not relevant on Linux.
1018 \fB\fBfilesystem_limit\fR=\fBnone\fR\fR | \fIcount\fR
1022 Limits the number of filesystems and volumes that can exist under this point in
1023 the dataset tree. The limit is not enforced if the user is allowed to change
1024 the limit. Setting a filesystem_limit on a descendent of a filesystem that
1025 already has a filesystem_limit does not override the ancestor's filesystem_limit,
1026 but rather imposes an additional limit. This feature must be enabled to be used
1027 (see \fBzpool-features\fR(5)).
1033 \fB\fBmountpoint\fR=\fIpath\fR | \fBnone\fR | \fBlegacy\fR\fR
1037 Controls the mount point used for this file system. See the "Mount Points" section for more information on how this property is used.
1039 When the \fBmountpoint\fR property is changed for a file system, the file system and any children that inherit the mount point are unmounted. If the new value is \fBlegacy\fR, then they remain unmounted. Otherwise, they are automatically remounted in the new location if the property was previously \fBlegacy\fR or \fBnone\fR, or if they were mounted before the property was changed. In addition, any shared file systems are unshared and shared in the new location.
1045 \fB\fBnbmand\fR=\fBoff\fR | \fBon\fR\fR
1049 Controls whether the file system should be mounted with \fBnbmand\fR (Non Blocking mandatory locks). This is used for \fBCIFS\fR clients. Changes to this property only take effect when the file system is umounted and remounted. See \fBmount\fR(1M) on a Solaris system for more information on \fBnbmand\fR mounts.
1051 The values \fBon\fR and \fBoff\fR are equivalent to the \fBnbmand\fR and \fBnonbmand\fR mount options.
1053 This property is not used on Linux.
1059 \fB\fBprimarycache\fR=\fBall\fR | \fBnone\fR | \fBmetadata\fR\fR
1063 Controls what is cached in the primary cache (ARC). If this property is set to \fBall\fR, then both user data and metadata is cached. If this property is set to \fBnone\fR, then neither user data nor metadata is cached. If this property is set to \fBmetadata\fR, then only metadata is cached. The default value is \fBall\fR.
1069 \fB\fBquota\fR=\fBnone\fR | \fIsize\fR\fR
1073 Limits the amount of space a dataset and its descendents can consume. This property enforces a hard limit on the amount of space used. This includes all space consumed by descendents, including file systems and snapshots. Setting a quota on a descendent of a dataset that already has a quota does not override the ancestor's quota, but rather imposes an additional limit.
1075 Quotas cannot be set on volumes, as the \fBvolsize\fR property acts as an implicit quota.
1081 \fB\fBsnapshot_limit\fR=\fBnone\fR\fR | \fIcount\fR
1085 Limits the number of snapshots that can be created on a dataset and its
1086 descendents. Setting a snapshot_limit on a descendent of a dataset that already
1087 has a snapshot_limit does not override the ancestor's snapshot_limit, but
1088 rather imposes an additional limit. The limit is not enforced if the user is
1089 allowed to change the limit. For example, this means that recursive snapshots
1090 taken from the global zone are counted against each delegated dataset within
1091 a zone. This feature must be enabled to be used (see \fBzpool-features\fR(5)).
1097 \fB\fBuserquota@\fR\fIuser\fR=\fBnone\fR | \fIsize\fR\fR
1099 \fB\fBuserobjquota@\fR\fIuser\fR=\fBnone\fR | \fIcount\fR\fR
1103 Limits the amount of space consumed by the specified user. Similar to the \fBrefquota\fR property, the \fBuserquota\fR space calculation does not include space that is used by descendent datasets, such as snapshots and clones. User space consumption is identified by the \fBuserspace@\fR\fIuser\fR property. See the \fBzfs userspace\fR subcommand for more information.
1105 Enforcement of user quotas may be delayed by several seconds. This delay means that a user might exceed their quota before the system notices that they are over quota and begins to refuse additional writes with the \fBEDQUOT\fR error message.
1107 Unprivileged users can only access their own groups' space usage. The root user, or a user who has been granted the \fBuserquota\fR privilege with \fBzfs allow\fR, can get and set everyone's quota.
1109 This property is not available on volumes, on file systems before version 4, or on pools before version 15. The \fBuserquota@\fR... properties are not displayed by \fBzfs get all\fR. The user's name must be appended after the \fB@\fR symbol, using one of the following forms:
1114 \fIPOSIX name\fR (for example, \fBjoe\fR)
1120 \fIPOSIX numeric ID\fR (for example, \fB789\fR)
1126 \fISID name\fR (for example, \fBjoe.smith@mydomain\fR)
1132 \fISID numeric ID\fR (for example, \fBS-1-123-456-789\fR)
1135 Files created on Linux always have POSIX owners.
1138 The \fBuserobjquota\fR is similar to \fBuserquota\fR but it limits the number of objects a \fIuser\fR can create.
1139 Please refer to \fBuserobjused\fR for more information about how ZFS counts object usage.
1145 \fB\fBgroupquota@\fR\fIgroup\fR=\fBnone\fR\fR | \fIsize\fR
1147 \fB\fBgroupobjquota@\fR\fIgroup\fR=\fBnone\fR\fR | \fIcount\fR
1151 Limits the amount of space consumed by the specified group. Group space consumption is identified by the \fBuserquota@\fR\fIuser\fR property.
1153 Unprivileged users can access only their own groups' space usage. The root user, or a user who has been granted the \fBgroupquota\fR privilege with \fBzfs allow\fR, can get and set all groups' quotas.
1155 The \fBgroupobjquota\fR is similar to \fBgroupquota\fR but it limits that the \fIgroup\fR can consume \fIcount\fR number of objects at most.
1156 Please refer to \fBuserobjused\fR for more information about how zfs counts object usage.
1162 \fB\fBreadonly\fR=\fBoff\fR | \fBon\fR\fR
1166 Controls whether this dataset can be modified. The default value is \fBoff\fR.
1168 This property can also be referred to by its shortened column name, \fBrdonly\fR.
1170 The values \fBon\fR and \fBoff\fR are equivalent to the \fBro\fR and \fBrw\fR mount options.
1176 \fB\fBrecordsize\fR=\fIsize\fR\fR
1180 Specifies a suggested block size for files in the file system. This property is designed solely for use with database workloads that access files in fixed-size records. \fBZFS\fR automatically tunes block sizes according to internal algorithms optimized for typical access patterns.
1182 For databases that create very large files but access them in small random chunks, these algorithms may be suboptimal. Specifying a \fBrecordsize\fR greater than or equal to the record size of the database can result in significant performance gains. Use of this property for general purpose file systems is strongly discouraged, and may adversely affect performance.
1184 Any power of two from 512B to 1MiB is valid. The default is 128KiB. Values larger than 128KiB require the pool have the \fBlarge_blocks\fR feature enabled. See \fBzpool-features\fR(5) for details on ZFS feature flags and the \fBlarge_blocks\fR feature.
1186 Changing the file system's \fBrecordsize\fR affects only files created afterward; existing files are unaffected.
1188 This property can also be referred to by its shortened column name, \fBrecsize\fR.
1194 \fB\fBredundant_metadata\fR=\fBall\fR | \fBmost\fR\fR
1198 Controls what types of metadata are stored redundantly. ZFS stores an
1199 extra copy of metadata, so that if a single block is corrupted, the
1200 amount of user data lost is limited. This extra copy is in addition to
1201 any redundancy provided at the pool level (e.g. by mirroring or RAID-Z),
1202 and is in addition to an extra copy specified by the \fBcopies\fR
1203 property (up to a total of 3 copies). For example if the pool is
1204 mirrored, \fBcopies\fR=2, and \fBredundant_metadata\fR=most, then ZFS
1205 stores 6 copies of most metadata, and 4 copies of data and some
1208 When set to \fBall\fR, ZFS stores an extra copy of all metadata. If a
1209 single on-disk block is corrupt, at worst a single block of user data
1210 (which is \fBrecordsize\fR bytes long) can be lost.
1212 When set to \fBmost\fR, ZFS stores an extra copy of most types of
1213 metadata. This can improve performance of random writes, because less
1214 metadata must be written. In practice, at worst about 100 blocks (of
1215 \fBrecordsize\fR bytes each) of user data can be lost if a single
1216 on-disk block is corrupt. The exact behavior of which metadata blocks
1217 are stored redundantly may change in future releases.
1219 The default value is \fBall\fR.
1225 \fB\fBrefquota\fR=\fBnone\fR | \fIsize\fR\fR
1229 Limits the amount of space a dataset can consume. This property enforces a hard limit on the amount of space used. This hard limit does not include space used by descendents, including file systems and snapshots.
1235 \fB\fBrefreservation\fR=\fBnone\fR | \fIsize\fR\fR
1239 The minimum amount of space guaranteed to a dataset, not including its descendents. When the amount of space used is below this value, the dataset is treated as if it were taking up the amount of space specified by \fBrefreservation\fR. The \fBrefreservation\fR reservation is accounted for in the parent datasets' space used, and counts against the parent datasets' quotas and reservations.
1241 If \fBrefreservation\fR is set, a snapshot is only allowed if there is enough free pool space outside of this reservation to accommodate the current number of \fBreferenced\fR bytes in the dataset (which are the bytes to be referenced by the snapshot). This is necessary to continue to provide the \fBrefreservation\fRguarantee to the dataset.
1243 For volumes, see also \fBvolsize\fR.
1245 This property can also be referred to by its shortened column name, \fBrefreserv\fR.
1251 \fB\fBrelatime\fR=\fBoff\fR | \fBon\fR\fR
1255 Controls the manner in which the access time is updated when \fBatime=on\fR is set. Turning this property \fBon\fR causes the access time to be updated relative to the modify or change time. Access time is only updated if the previous access time was earlier than the current modify or change time or if the existing access time hasn't been updated within the past 24 hours. The default value is \fBoff\fR.
1257 The values \fBon\fR and \fBoff\fR are equivalent to the \fBrelatime\fR and \fBnorelatime\fR mount options.
1263 \fB\fBreservation\fR=\fBnone\fR | \fIsize\fR\fR
1267 The minimum amount of space guaranteed to a dataset and its descendents. When the amount of space used is below this value, the dataset is treated as if it were taking up the amount of space specified by its reservation. Reservations are accounted for in the parent datasets' space used, and count against the parent datasets' quotas and reservations.
1269 This property can also be referred to by its shortened column name, \fBreserv\fR.
1275 \fB\fBsecondarycache\fR=\fBall\fR | \fBnone\fR | \fBmetadata\fR\fR
1279 Controls what is cached in the secondary cache (L2ARC). If this property is set to \fBall\fR, then both user data and metadata is cached. If this property is set to \fBnone\fR, then neither user data nor metadata is cached. If this property is set to \fBmetadata\fR, then only metadata is cached. The default value is \fBall\fR.
1285 \fB\fBsetuid\fR=\fBon\fR | \fBoff\fR\fR
1289 Controls whether the setuid bit is respected for the file system. The default value is \fBon\fR.
1291 The values \fBon\fR and \fBoff\fR are equivalent to the \fBsuid\fR and \fBnosuid\fR mount options.
1297 \fB\fBsharesmb\fR=\fBoff\fR | \fBon\fR
1301 Controls whether the file system is shared by using \fBSamba USERSHARES\fR, and what options are to be used. Otherwise, the file system is automatically shared and unshared with the \fBzfs share\fR and \fBzfs unshare\fR commands. If the property is set to \fBon\fR, the \fBnet\fR(8) command is invoked to create a \fBUSERSHARE\fR.
1303 Because \fBSMB\fR shares requires a resource name, a unique resource name is constructed from the dataset name. The constructed name is a copy of the dataset name except that the characters in the dataset name, which would be invalid in the resource name, are replaced with underscore (\fB_\fR) characters. Linux does not currently support additional options which might be available on Solaris.
1305 If the \fBsharesmb\fR property is set to \fBoff\fR, the file systems are unshared.
1307 In Linux, the share is created with the ACL (Access Control List) "Everyone:F" ("F" stands for "full permissions", ie. read and write permissions) and no guest access (which means Samba must be able to authenticate a real user, system passwd/shadow, LDAP or smbpasswd based) by default. This means that any additional access control (disallow specific user specific access etc) must be done on the underlaying filesystem.
1310 Example to mount a SMB filesystem shared through ZFS (share/tmp):
1311 Note that a user and his/her password \fBmust\fR be given!
1314 smbmount //127.0.0.1/share_tmp /mnt/tmp -o user=workgroup/turbo,password=obrut,uid=1000
1320 \fBMinimal /etc/samba/smb.conf configuration\fR
1323 * Samba will need to listen to 'localhost' (127.0.0.1) for the zfs utilities to communicate with Samba. This is the default behavior for most Linux distributions.
1325 * Samba must be able to authenticate a user. This can be done in a number of ways, depending on if using the system password file, LDAP or the Samba specific smbpasswd file. How to do this is outside the scope of this manual. Please refer to the smb.conf(5) manpage for more information.
1327 * See the \fBUSERSHARE\fR section of the \fBsmb.conf\fR(5) man page for all configuration options in case you need to modify any options to the share afterwards. Do note that any changes done with the 'net' command will be undone if the share is every unshared (such as at a reboot etc). In the future, ZoL will be able to set specific options directly using sharesmb=<option>.
1335 \fB\fBsharenfs\fR=\fBoff\fR | \fBon\fR | \fIopts\fR\fR
1339 Controls whether the file system is shared via \fBNFS\fR, and what options are used. A file system with a \fBsharenfs\fR property of \fBoff\fR is managed with the \fBexportfs\fR(8) command and entries in \fB/etc/exports\fR file. Otherwise, the file system is automatically shared and unshared with the \fBzfs share\fR and \fBzfs unshare\fR commands. If the property is set to \fBon\fR, the dataset is shared using the \fBexportfs\fR(8) command in the following manner (see \fBexportfs\fR(8) for the meaning of the different options):
1343 /usr/sbin/exportfs -i -o sec=sys,rw,crossmnt,no_subtree_check,no_root_squash,mountpoint *:<mountpoint of dataset>
1347 Otherwise, the \fBexportfs\fR(8) command is invoked with options equivalent to the contents of this property.
1349 When the \fBsharenfs\fR property is changed for a dataset, the dataset and any children inheriting the property are re-shared with the new options, only if the property was previously \fBoff\fR, or if they were shared before the property was changed. If the new property is \fBoff\fR, the file systems are unshared.
1355 \fB\fBlogbias\fR=\fBlatency\fR | \fBthroughput\fR\fR
1359 Provide a hint to ZFS about handling of synchronous requests in this dataset. If \fBlogbias\fR is set to \fBlatency\fR (the default), ZFS will use pool log devices (if configured) to handle the requests at low latency. If \fBlogbias\fR is set to \fBthroughput\fR, ZFS will not use configured pool log devices. ZFS will instead optimize synchronous operations for global pool throughput and efficient use of resources.
1365 \fB\fBsnapdev\fR=\fBhidden\fR | \fBvisible\fR\fR
1369 Controls whether the snapshots devices of zvol's are hidden or visible. The default value is \fBhidden\fR.
1371 In this context, hidden does not refer to the concept of hiding files or directories by starting their name with a "." character. Even with \fBvisible\fR, the directory is still named \fB\&.zfs\fR. Instead, \fBhidden\fR means that the directory is not returned by \fBreaddir\fR(3), so it doesn't show up in directory listings done by any program, including \fBls\fR \fB-a\fR. It is still possible to chdir(2) into the directory, so \fBcd\fR \fB\&.zfs\fR works even with \fBhidden\fR. This unusual behavior is to protect against unwanted effects from applications recursing into the special \fB\&.zfs\fR directory.
1377 \fB\fBsnapdir\fR=\fBhidden\fR | \fBvisible\fR\fR
1381 Controls whether the \fB\&.zfs\fR directory is hidden or visible in the root of the file system as discussed in the "Snapshots" section. The default value is \fBhidden\fR.
1387 \fB\fBsync\fR=\fBstandard\fR | \fBalways\fR | \fBdisabled\fR\fR
1391 Controls the behavior of synchronous requests (e.g. fsync, O_DSYNC).
1392 \fBstandard\fR is the POSIX specified behavior of ensuring all synchronous
1393 requests are written to stable storage and all devices are flushed to ensure
1394 data is not cached by device controllers (this is the default). \fBalways\fR
1395 causes every file system transaction to be written and flushed before its
1396 system call returns. This has a large performance penalty. \fBdisabled\fR
1397 disables synchronous requests. File system transactions are only committed to
1398 stable storage periodically. This option will give the highest performance.
1399 However, it is very dangerous as ZFS would be ignoring the synchronous
1400 transaction demands of applications such as databases or NFS. Administrators
1401 should only use this option when the risks are understood.
1407 \fB\fBversion\fR=\fB5\fR | \fB4\fR | \fB3\fR | \fB2\fR | \fB1\fR | \fBcurrent\fR\fR
1411 The on-disk version of this file system, which is independent of the pool version. This property can only be set to later supported versions. The value \fBcurrent\fR automatically selects the latest supported version. See the \fBzfs upgrade\fR command.
1417 \fB\fBvolsize\fR=\fIsize\fR\fR
1421 For volumes, specifies the logical size of the volume. By default, creating a volume establishes a \fBrefreservation\fR equal to the volume size plus the metadata required for a fully-written volume. (For pool version 8 or lower, a \fBreservation\fR is set instead.) Any changes to \fBvolsize\fR are reflected in an equivalent change to the \fBrefreservation\fR. The \fBvolsize\fR can only be set to a multiple of \fBvolblocksize\fR, and cannot be zero.
1423 Without the reservation, the volume could run out of space, resulting in undefined behavior or data corruption, depending on how the volume is used. These effects can also occur when the volume size is changed while it is in use (particularly when shrinking the size). Extreme care should be used when adjusting the volume size.
1425 A "sparse volume" (also known as "thin provisioning") can be created by specifying the \fB-s\fR option to the \fBzfs create -V\fR command, or by removing (or changing) the \fBrefreservation\fR after the volume has been created. A "sparse volume" is a volume where the \fBrefreservation\fR is unset or less then the volume size. Consequently, writes to a sparse volume can fail with \fBENOSPC\fR when the pool is low on space. For a sparse volume, changes to \fBvolsize\fR are not reflected in the reservation.
1431 \fB\fBvscan\fR=\fBoff\fR | \fBon\fR\fR
1435 Controls whether regular files should be scanned for viruses when a file is opened and closed. In addition to enabling this property, the virus scan service must also be enabled for virus scanning to occur. The default value is \fBoff\fR.
1437 This property is not used on Linux.
1443 \fB\fBxattr\fR=\fBon\fR | \fBoff\fR | \fBsa\fR\fR
1447 Controls whether extended attributes are enabled for this file system. Two
1448 styles of extended attributes are supported either directory based or system
1451 The default value of \fBon\fR enables directory based extended attributes.
1452 This style of xattr imposes no practical limit on either the size or number of
1453 xattrs which may be set on a file. Although under Linux the \fBgetxattr\fR(2)
1454 and \fBsetxattr\fR(2) system calls limit the maximum xattr size to 64K. This
1455 is the most compatible style of xattr and it is supported by the majority of
1456 ZFS implementations.
1458 System attribute based xattrs may be enabled by setting the value to \fBsa\fR.
1459 The key advantage of this type of xattr is improved performance. Storing
1460 xattrs as system attributes significantly decreases the amount of disk IO
1461 required. Up to 64K of xattr data may be stored per file in the space reserved
1462 for system attributes. If there is not enough space available for an xattr then
1463 it will be automatically written as a directory based xattr. System attribute
1464 based xattrs are not accessible on platforms which do not support the
1465 \fBxattr=sa\fR feature.
1467 The use of system attribute based xattrs is strongly encouraged for users of
1468 SELinux or Posix ACLs. Both of these features heavily rely of xattrs and
1469 benefit significantly from the reduced xattr access time.
1471 The values \fBon\fR and \fBoff\fR are equivalent to the \fBxattr\fR and \fBnoxattr\fR mount options.
1477 \fB\fBzoned\fR=\fBoff\fR | \fBon\fR\fR
1481 Controls whether the dataset is managed from a non-global zone. Zones are a Solaris feature and are not relevant on Linux. The default value is \fBoff\fR.
1486 The following three properties cannot be changed after the file system is created, and therefore, should be set when the file system is created. If the properties are not set with the \fBzfs create\fR or \fBzpool create\fR commands, these properties are inherited from the parent dataset. If the parent dataset lacks these properties due to having been created prior to these features being supported, the new file system will have the default values for these properties.
1490 \fB\fBcasesensitivity\fR=\fBsensitive\fR | \fBinsensitive\fR | \fBmixed\fR\fR
1494 Indicates whether the file name matching algorithm used by the file system should be case-sensitive, case-insensitive, or allow a combination of both styles of matching. The default value for the \fBcasesensitivity\fR property is \fBsensitive\fR. Traditionally, UNIX and POSIX file systems have case-sensitive file names.
1496 The \fBmixed\fR value for the \fBcasesensitivity\fR property indicates that the file system can support requests for both case-sensitive and case-insensitive matching behavior. Currently, case-insensitive matching behavior on a file system that supports mixed behavior is limited to the Solaris CIFS server product.
1502 \fB\fBnormalization\fR = \fBnone\fR | \fBformC\fR | \fBformD\fR | \fBformKC\fR | \fBformKD\fR\fR
1506 Indicates whether the file system should perform a Unicode normalization of file names whenever two file names are compared, and which normalization algorithm should be used.
1508 If this property is set to a value other than \fBnone\fR (the default), and the \fButf8only\fR property was left unspecified, the \fButf8only\fR property is automatically set to \fBon\fR. See the cautionary note in the \fButf8only\fR section before modifying \fBnormalization\fR.
1510 File names are always stored unmodified; names are normalized as part of any comparison process. Thus, \fBformC\fR and \fBformD\fR are equivalent, as are \fBformKC\fR and \fBformKD\fR. Given that, only \fBformD\fR and \fBformKD\fR make sense, as they are slightly faster because they avoid the additional canonical composition step.
1511 .\" unicode.org says it's possible to quickly detect if a string is already in a given form. Since most text (basically everything but OS X) is already in NFC, this means formC could potentially be made faster. But the additional complexity probably isn't worth the likely undetectable in practice speed improvement.
1513 The practical impact of this property is: \fBnone\fR (like traditional filesystems) allows a directory to contain two files that appear (to humans) to have the same name. The other options solve this problem, for different definitions of "the same". If you need to solve this problem and are not sure what to choose,\fBformD\fR.
1515 This property cannot be changed after the file system is created.
1521 \fB\fButf8only\fR=\fBoff\fR | \fBon\fR\fR
1525 Indicates whether the file system should reject file names that include characters that are not present in the \fBUTF-8\fR character set. If this property is explicitly set to \fBoff\fR, the \fBnormalization\fR property must either not be explicitly set or be set to \fBnone\fR. The default value for the \fButf8only\fR property is \fBoff\fR.
1527 Note that forcing the use of \fBUTF-8\fR filenames may cause pain for users. For example, extracting files from an archive will fail if the filenames within the archive are encoded in another character set.
1529 If you are thinking of setting this (to \fBon\fR), you probably want to set \fBnormalization\fR=\fBformD\fR which will set this property to \fBon\fR implicitly.
1531 This property cannot be changed after the file system is created.
1536 The \fBcasesensitivity\fR, \fBnormalization\fR, and \fButf8only\fR properties are also permissions that can be assigned to non-privileged users by using the \fBZFS\fR delegated administration feature.
1542 \fB\fBcontext\fR=\fBnone\fR | \fISELinux_User:SElinux_Role:Selinux_Type:Sensitivity_Level\fR\fR
1546 This flag sets the SELinux context for all files in the filesystem under the mountpoint for that filesystem. See \fBselinux\fR(8) for more information.
1552 \fB\fBfscontext\fR=\fBnone\fR | \fISELinux_User:SElinux_Role:Selinux_Type:Sensitivity_Level\fR\fR
1556 This flag sets the SELinux context for the filesystem being mounted. See \fBselinux\fR(8) for more information.
1562 \fB\fBdefcontext\fR=\fBnone\fR | \fISELinux_User:SElinux_Role:Selinux_Type:Sensitivity_Level\fR\fR
1566 This flag sets the SELinux context for unlabeled files. See \fBselinux\fR(8) for more information.
1572 \fB\fBrootcontext\fR=\fBnone\fR | \fISELinux_User:SElinux_Role:Selinux_Type:Sensitivity_Level\fR\fR
1576 This flag sets the SELinux context for the root inode of the filesystem. See \fBselinux\fR(8) for more information.
1582 \fB\fBoverlay\fR=\fBoff\fR | \fBon\fR\fR
1586 Allow mounting on a busy directory or a directory which already contains files/directories. This is the default mount behavior for Linux filesystems. However, for consistency with ZFS on other platforms overlay mounts are disabled by default. Set \fBoverlay=on\fR to enable overlay mounts.
1589 .SS "Temporary Mount Point Properties"
1591 When a file system is mounted, either through \fBmount\fR(8) for legacy mounts or the \fBzfs mount\fR command for normal file systems, its mount options are set according to its properties. The correlation between properties and mount options is as follows:
1595 PROPERTY MOUNT OPTION
1597 canmount auto/noauto
1598 devices devices/nodevices
1601 relatime relatime/norelatime
1604 nbmand nbmand/nonbmand (Solaris)
1611 In addition, these options can be set on a per-mount basis using the \fB-o\fR option, without affecting the property that is stored on disk. The values specified on the command line override the values stored in the dataset. The \fB-nosuid\fR option is an alias for \fBnodevices,nosetuid\fR. These properties are reported as "temporary" by the \fBzfs get\fR command. If the properties are changed while the dataset is mounted, the new setting overrides any temporary settings.
1612 .SS "User Properties"
1614 In addition to the standard native properties, \fBZFS\fR supports arbitrary user properties. User properties have no effect on \fBZFS\fR behavior, but applications or administrators can use them to annotate datasets (file systems, volumes, and snapshots). Unlike native properties, user properties are editable on snapshots.
1617 User property names must contain a colon (\fB:\fR) character to distinguish them from native properties. They may contain lowercase letters, numbers, and the following punctuation characters: colon (\fB:\fR), dash (\fB-\fR), period (\fB\&.\fR), and underscore (\fB_\fR). The expected convention is that the property name is divided into two portions such as \fImodule\fR\fB:\fR\fIproperty\fR, but this namespace is not enforced by \fBZFS\fR. User property names can be at most 256 characters, and cannot begin with a dash (\fB-\fR).
1620 When making programmatic use of user properties, it is strongly suggested to use a reversed \fBDNS\fR domain name for the \fImodule\fR component of property names to reduce the chance that two independently-developed packages use the same property name for different purposes. For example, property names beginning with \fBcom.sun\fR. are reserved for definition by Oracle Corporation (which acquired Sun Microsystems).
1623 The values of user properties are arbitrary strings, are always inherited, and are never validated. All of the commands that operate on properties (\fBzfs list\fR, \fBzfs get\fR, \fBzfs set\fR, and so forth) can be used to manipulate both native properties and user properties. Use the \fBzfs inherit\fR command to clear a user property. If the property is not defined in any parent dataset, it is removed entirely. Property values are limited to 8192 bytes.
1624 .SS "ZFS Volumes as Swap"
1626 \fBZFS\fR volumes may be used as Linux swap devices. After creating the volume
1627 with the \fBzfs create\fR command set up and enable the swap area using the
1628 \fBmkswap\fR(8) and \fBswapon\fR(8) commands. Do not swap to a file on a
1629 \fBZFS\fR file system. A \fBZFS\fR swap file configuration is not supported.
1632 All subcommands that modify state are logged persistently to the pool in their original form. The log can be viewed with \fBzpool history\fR.
1640 Displays a help message.
1646 \fB\fBzfs create\fR [\fB-p\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ... \fIfilesystem\fR\fR
1650 Creates a new \fBZFS\fR file system. The file system is automatically mounted according to the \fBmountpoint\fR and \fBcanmount\fR properties.
1658 Creates all the non-existing parent datasets. Datasets created in this manner inherit their properties; any property specified on the command line using the \fB-o\fR option applies only to the final child file system. If the target filesystem already exists, the operation completes successfully and no properties are changed.
1664 \fB\fB-o\fR \fIproperty\fR=\fIvalue\fR\fR
1668 Sets the specified property as if the command \fBzfs set\fR \fIproperty\fR=\fIvalue\fR was invoked at the same time the dataset was created. Any editable \fBZFS\fR property can also be set at creation time. Multiple \fB-o\fR options can be specified. An error results if the same property is specified in multiple \fB-o\fR options.
1676 \fB\fBzfs create\fR [\fB-ps\fR] [\fB-b\fR \fIblocksize\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ... \fB-V\fR \fIsize\fR \fIvolume\fR\fR
1680 Creates a volume of the given size. The volume is exported as a block device in \fB/dev/zvol/\fR\fIpath\fR, where \fIpath\fR is the name of the volume in the \fBZFS\fR namespace. The size represents the logical size as exported by the device. By default, a \fBrefreservation\fR is created.
1682 \fIsize\fR is automatically rounded up to the nearest 128KiB to ensure that the volume has an integral number of blocks regardless of \fIblocksize\fR.
1690 Creates all the non-existing parent datasets as file systems. Datasets created in this manner inherit their properties; any property specified on the command line using the \fB-o\fR option applies only to the final child volume. If the target volume already exists, the operation completes successfully and no properties are changed.
1700 Creates a sparse volume by omitting the automatic creation of a \fBrefreservation\fR. See \fBvolsize\fR in the Native Properties section for more information about sparse volumes. If this option is specified in conjunction with \fB-o\fR \fBrefreservation\fR, the \fBrefreservation\fR will be honored; this allows for a partial reservation on a sparse volume.
1706 \fB\fB-o\fR \fIproperty\fR=\fIvalue\fR\fR
1710 Sets the specified property as if the \fBzfs set\fR \fIproperty\fR=\fIvalue\fR command was invoked at the same time the dataset was created. Any editable \fBZFS\fR property can also be set at creation time. Multiple \fB-o\fR options can be specified. An error results if the same property is specified in multiple \fB-o\fR options.
1712 If \fB-o\fR \fBvolsize\fR is provided, the resulting behavior is undefined; it conflicts with the -V option, which is required in this mode.
1718 \fB\fB-b\fR \fIblocksize\fR\fR
1722 Equivalent to \fB-o\fR \fBvolblocksize\fR=\fIblocksize\fR. If this option is specified in conjunction with \fB-o\fR \fBvolblocksize\fR, the resulting behavior is undefined.
1730 \fBzfs destroy\fR [\fB-fnpRrv\fR] \fIfilesystem\fR|\fIvolume\fR
1734 Destroys the given dataset. By default, the command unshares any file systems that are currently shared, unmounts any file systems that are currently mounted, and refuses to destroy a dataset that has active dependents (children or clones).
1742 Recursively destroy all children.
1752 Recursively destroy all dependents, including cloned file systems outside the target hierarchy.
1762 Force an unmount of any file systems using the \fBzfs unmount -f\fR command. This option has no effect on non-file systems or unmounted file systems.
1772 Do a dry-run ("No-op") deletion. No data will be deleted. This is
1773 useful in conjunction with the \fB-v\fR or \fB-p\fR flags to determine what
1774 data would be deleted.
1784 Print machine-parsable verbose information about the deleted data.
1794 Print verbose information about the deleted data.
1798 Extreme care should be taken when applying either the \fB-r\fR or the \fB-R\fR options, as they can destroy large portions of a pool.
1804 \fBzfs destroy\fR [\fB-dnpRrv\fR] \fIfilesystem\fR|\fIvolume\fR@\fIsnap\fR[%\fIsnap\fR][,...]
1808 The specified snapshots are destroyed immediately if they have no clones and the user-initiated reference count is zero (i.e. there are no holds set with \fBzfs hold\fR). If these conditions are not met, this command returns an error, unless \fB-d\fR is supplied.
1810 An inclusive range of snapshots may be specified by separating the
1811 first and last snapshots with a percent sign.
1812 The first and/or last snapshots may be left blank, in which case the
1813 filesystem's oldest or newest snapshot will be implied.
1816 (or ranges of snapshots) of the same filesystem or volume may be specified
1817 in a comma-separated list of snapshots.
1818 Only the snapshot's short name (the
1819 part after the \fB@\fR) should be specified when using a range or
1820 comma-separated list to identify multiple snapshots.
1828 If a snapshot does not qualify for immediate destruction, rather than returning an error, it is marked for deferred destruction. In this state, it exists as a usable, visible snapshot until both of the preconditions listed above are met, at which point it is destroyed.
1838 Destroy (or mark for deferred destruction) all snapshots with this name in descendent file systems.
1848 Recursively destroy all clones of these snapshots, including the clones,
1849 snapshots, and children. If this flag is specified, the \fB-d\fR flag will
1860 Do a dry-run ("No-op") deletion. No data will be deleted. This is
1861 useful in conjunction with the \fB-v\fR or \fB-p\fR flags to determine what
1862 data would be deleted.
1872 Print machine-parsable verbose information about the deleted data.
1882 Print verbose information about the deleted data.
1886 Extreme care should be taken when applying either the \fB-r\fR or the \fB-R\fR
1887 options, as they can destroy large portions of a pool and cause unexpected
1888 behavior for mounted file systems in use.
1896 \fBzfs destroy\fR \fIfilesystem\fR|\fIvolume\fR#\fIbookmark\fR
1900 The given bookmark is destroyed.
1907 \fB\fBzfs snapshot\fR [\fB-r\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ... \fIfilesystem@snapname\fR|\fIvolume@snapname\fR\fR ...
1911 Creates snapshots with the given names. All previous modifications by successful system calls to the file system are part of the snapshots. Snapshots are taken atomically, so that all snapshots correspond to the same moment in time. See the "Snapshots" section for details.
1919 Recursively create snapshots of all descendent datasets.
1925 \fB\fB-o\fR \fIproperty\fR=\fIvalue\fR\fR
1929 Sets the specified property; see \fBzfs set\fR for details.
1937 \fB\fBzfs rollback\fR [\fB-rRf\fR] \fIsnapshot\fR\fR
1941 Roll back the given dataset to a previous snapshot. When a dataset is rolled back, all data that has changed since the snapshot is discarded, and the dataset reverts to the state at the time of the snapshot. By default, the command refuses to roll back to a snapshot other than the most recent one. In order to do so, all intermediate snapshots and bookmarks must be destroyed by specifying the \fB-r\fR option.
1943 The \fB-rR\fR options do not recursively destroy the child snapshots of a recursive snapshot. Only direct snapshots of the specified filesystem are destroyed by either of these options. To completely roll back a recursive snapshot, you must rollback the individual child snapshots.
1951 Destroy any snapshots and bookmarks more recent than the one specified.
1961 Recursively destroy any more recent snapshots and bookmarks, as well as any clones of those snapshots.
1971 Used with the \fB-R\fR option to force an unmount (see \fBzfs unmount -f\fR) of any clone file systems that are to be destroyed.
1979 \fB\fBzfs clone\fR [\fB-p\fR] [\fB-o\fR \fIproperty\fR=\fIvalue\fR] ... \fIsnapshot\fR \fIfilesystem\fR|\fIvolume\fR\fR
1983 Creates a clone of the given snapshot. See the "Clones" section for details. The target dataset can be located anywhere in the \fBZFS\fR hierarchy, and is created as the same type as the original.
1991 Creates all the non-existing parent datasets; see \fBzfs create\fR for details.
1997 \fB\fB-o\fR \fIproperty\fR=\fIvalue\fR\fR
2001 Sets the specified property; see \fBzfs set\fR for details.
2009 \fB\fBzfs promote\fR \fIclone-filesystem\fR\fR
2013 Promotes a clone file system to no longer be dependent on its "origin" snapshot. This makes it possible to destroy the file system that the clone was created from. The clone parent-child dependency relationship is reversed, so that the origin file system becomes a clone of the specified file system.
2015 The snapshot that was cloned, and any snapshots previous to this snapshot, are now owned by the promoted clone. The space they use moves from the origin file system to the promoted clone, so enough space must be available to accommodate these snapshots. No new space is consumed by this operation, but the space accounting is adjusted. The promoted clone must not have any conflicting snapshot names of its own. The \fBzfs rename\fR command can be used to rename any conflicting snapshots.
2021 \fB\fBzfs rename\fR [\fB-f\fR] \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR\fR
2025 \fB\fBzfs rename\fR [\fB-fp\fR] \fIfilesystem\fR|\fIvolume\fR \fIfilesystem\fR|\fIvolume\fR\fR
2029 Renames the given dataset. The new target can be located anywhere in the \fBZFS\fR hierarchy, with the exception of snapshots. Snapshots can only be renamed within the parent file system or volume. When renaming a snapshot, the parent file system of the snapshot does not need to be specified as part of the second argument. Renamed file systems can inherit new mount points, in which case they are unmounted and remounted at the new mount point.
2037 Creates all the nonexistent parent datasets; see \fBzfs create\fR for details.
2047 Force unmount any filesystems that need to be unmounted in the process.
2055 \fB\fBzfs rename\fR \fB-r\fR \fIsnapshot\fR \fIsnapshot\fR\fR
2059 Recursively rename the snapshots of all descendent datasets. Snapshots are the only dataset that can be renamed recursively.
2065 \fB\fBzfs\fR \fBlist\fR [\fB-r\fR|\fB-d\fR \fIdepth\fR] [\fB-Hp\fR] [\fB-o\fR \fIproperty\fR[,\fI\&...\fR]] [ \fB-t\fR \fItype\fR[,\fI\&...\fR]] [ \fB-s\fR \fIproperty\fR ] ... [ \fB-S\fR \fIproperty\fR ] ... [\fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR|\fImountpoint\fR] ...\fR
2069 Lists the property information for the given datasets in tabular form. If a mount point is specified, it can be an absolute pathname or a relative pathname starting with "./" (e.g. \fBzfs list ./\fR). By default, all file systems and volumes are displayed. Snapshots are displayed if the pool's \fBlistsnapshots\fR property is \fBon\fR (the default is \fBoff\fR). When listing hundreds or thousands of snapshots performance can be improved by restricting the output to only the name. In that case, it is recommended to use \fB-o name -s name\fR. The following fields are displayed by default: \fBname, used, available, referenced, mountpoint\fR
2077 Used for scripting mode. Do not print headers and separate fields by a single tab instead of arbitrary white space.
2086 Display numbers in parsable (exact) values.
2096 Recursively display any children of the dataset on the command line.
2102 \fB\fB-d\fR \fIdepth\fR\fR
2106 Recursively display any children of the dataset, limiting the recursion to \fIdepth\fR. A depth of \fB1\fR will display only the dataset and its direct children.
2112 \fB\fB-o\fR \fIproperty\fR\fR
2116 A comma-separated list of properties to display. The property must be:
2121 One of the properties described in the "Native Properties" section
2133 The value \fBname\fR to display the dataset name
2139 The value \fBspace\fR to display space usage properties on file systems and volumes. This is a shortcut for specifying \fB-o name,avail,used,usedsnap,usedds,usedrefreserv,usedchild\fR \fB-t filesystem,volume\fR syntax.
2146 \fB\fB-s\fR \fIproperty\fR\fR
2150 A property for sorting the output by column in ascending order based on the value of the property. The property must be one of the properties described in the "Properties" section, or the special value \fBname\fR to sort by the dataset name. Multiple properties can be specified at one time using multiple \fB-s\fR property options. Multiple \fB-s\fR options are evaluated from left to right in decreasing order of importance.
2152 The following is a list of sorting criteria:
2157 Numeric types sort in numeric order.
2163 String types sort in alphabetical order.
2169 Types inappropriate for a row sort that row to the literal bottom, regardless of the specified ordering.
2175 If no sorting options are specified the existing behavior of \fBzfs list\fR is preserved.
2182 \fB\fB-S\fR \fIproperty\fR\fR
2186 Same as the \fB-s\fR option, but sorts by property in descending order.
2192 \fB\fB-t\fR \fItype\fR\fR
2196 A comma-separated list of types to display, where \fItype\fR is one of \fBfilesystem\fR, \fBsnapshot\fR, \fBsnap\fR, \fBvolume\fR, \fBbookmark\fR, or \fBall\fR. For example, specifying \fB-t snapshot\fR displays only snapshots.
2204 \fB\fBzfs set\fR \fIproperty\fR=\fIvalue\fR[ \fIproperty\fR=\fIvalue\fR]...
2205 \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR|\fIbookmark\fR ...\fR
2209 Sets the property or list of properties to the given value(s) for each dataset.
2210 Only some properties can be edited. See the "Properties" section for more
2211 information on which properties can be set and acceptable values. User properties
2212 can be set on snapshots. For more information, see the "User Properties" section.
2217 \fB\fBzfs get\fR [\fB-r\fR|\fB-d\fR \fIdepth\fR] [\fB-Hp\fR] [\fB-o\fR \fIfield\fR[,...] [\fB-t\fR \fItype\fR[,...]] [\fB-s\fR \fIsource\fR[,...] "\fIall\fR" | \fIproperty\fR[,...] \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR ...\fR|\fIbookmark\fR ...\fR
2221 Displays properties for the given datasets. If no datasets are specified, then the command displays properties for all datasets on the system. For each property, the following columns are displayed:
2226 property Property name
2227 value Property value
2228 source Property source. Can either be local, default,
2229 temporary, inherited, received, or none (-).
2234 All columns are displayed by default, though this can be controlled by using the \fB-o\fR option. This command takes a comma-separated list of properties as described in the "Native Properties" and "User Properties" sections.
2236 The special value \fBall\fR can be used to display all properties that apply to the given dataset's type (filesystem, volume snapshot, or bookmark).
2244 Recursively display properties for any children.
2250 \fB\fB-d\fR \fIdepth\fR\fR
2254 Recursively display any children of the dataset, limiting the recursion to \fIdepth\fR. A depth of \fB1\fR will display only the dataset and its direct children.
2264 Display output in a form more easily parsed by scripts. Any headers are omitted, and fields are explicitly separated by a single tab instead of an arbitrary amount of space.
2270 \fB\fB-o\fR \fIfield\fR\fR
2274 A comma-separated list of columns to display. \fBname,property,value,source\fR is the default value.
2280 \fB\fB-s\fR \fIsource\fR\fR
2284 A comma-separated list of sources to display. Those properties coming from a source other than those in this list are ignored. Each source must be one of the following: \fBlocal,default,inherited,received,temporary,none\fR. The default value is all sources.
2294 Display numbers in parsable (exact) values.
2302 \fB\fBzfs inherit\fR [\fB-rS\fR] \fIproperty\fR \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR ...\fR
2306 Clears the specified property, causing it to be inherited from an ancestor, restored to default if no ancestor has the property set, or with the \fB-S\fR option reverted to the received value if one exists. See the "Properties" section for a listing of default values, and details on which properties can be inherited.
2314 Recursively inherit the given property for all children.
2323 Revert the property to the received value if one exists; otherwise operate as
2324 if the \fB-S\fR option was not specified.
2332 \fB\fBzfs upgrade\fR
2336 Displays a list of file systems that are not the most recent version.
2342 \fB\fBzfs upgrade\fR \fB-v\fR\fR
2346 Displays a list of file system versions.
2353 \fB\fBzfs upgrade\fR [\fB-r\fR] [\fB-V\fR \fIversion\fR] [\fB-a\fR | \fIfilesystem\fR]\fR
2357 Upgrades file systems to a new on-disk version. Once this is done, the file systems will no longer be accessible on systems running older versions of the software. \fBzfs send\fR streams generated from new snapshots of these file systems cannot be accessed on systems running older versions of the software.
2359 In general, the file system version is independent of the pool version. See \fBzpool\fR(8) for information on the \fBzpool upgrade\fR command.
2361 In some cases, the file system version and the pool version are interrelated and the pool version must be upgraded before the file system version can be upgraded.
2369 Upgrades all file systems on all imported pools.
2375 \fB\fIfilesystem\fR\fR
2379 Upgrades the specified file system.
2389 Upgrades the specified file system and all descendent file systems
2395 \fB\fB-V\fR \fIversion\fR\fR
2399 Upgrades to the specified \fIversion\fR. If the \fB-V\fR flag is not specified, this command upgrades to the most recent version. This option can only be used to increase the version number, and only up to the most recent version supported by this software.
2407 \fBzfs\fR \fBuserspace\fR [\fB-Hinp\fR] [\fB-o\fR \fIfield\fR[,...]]
2408 [\fB-s\fR \fIfield\fR] ...
2409 [\fB-S\fR \fIfield\fR] ...
2410 [\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
2414 Displays space consumed by, and quotas on, each user in the specified
2415 filesystem or snapshot. This corresponds to the \fBuserused@\fR\fIuser\fR, \fBuserobjused@\fR\fIuser\fR,
2416 \fBuserquota@\fR\fIuser\fR, and \fBuserobjquota@\fR\fIuser\fR properties.
2424 Print numeric ID instead of user/group name.
2434 Display output in a form more easily parsed by scripts. Any headers are omitted, and fields are explicitly separated by a single tab instead of an arbitrary amount of space.
2444 Use exact (parsable) numeric output.
2450 \fB\fB-o\fR \fIfield\fR[,...]\fR
2454 Display only the specified fields from the following
2455 set: \fBtype, name, used, quota\fR. The default is to display all fields.
2461 \fB\fB-s\fR \fIfield\fR\fR
2465 Sort output by this field. The \fIs\fR and \fIS\fR flags may be specified
2466 multiple times to sort first by one field, then by another. The default is
2467 \fB-s type\fR \fB-s name\fR.
2473 \fB\fB-S\fR \fIfield\fR\fR
2477 Sort by this field in reverse order. See \fB-s\fR.
2483 \fB\fB-t\fR \fItype\fR[,...]\fR
2487 Print only the specified types from the following
2488 set: \fBall, posixuser, smbuser, posixgroup, smbgroup\fR. The default
2489 is \fB-t posixuser,smbuser\fR. The default can be changed to include group
2500 Translate SID to POSIX ID. The POSIX ID may be ephemeral if no mapping exists.
2501 Normal POSIX interfaces (for example, \fBstat\fR(2), \fBls\fR(1) \fB-l\fR) perform
2502 this translation, so the \fB-i\fR option allows the output from \fBzfs
2503 userspace\fR to be compared directly with those utilities. However, \fB-i\fR
2504 may lead to confusion if some files were created by an SMB user before a
2505 SMB-to-POSIX name mapping was established. In such a case, some files will be owned
2506 by the SMB entity and some by the POSIX entity. However, the \fB-i\fR option
2507 will report that the POSIX entity has the total usage and quota for both.
2509 This option is not useful on Linux.
2517 \fBzfs\fR \fBgroupspace\fR [\fB-Hinp\fR] [\fB-o\fR \fIfield\fR[,...]]
2518 [\fB-s\fR \fIfield\fR] ...
2519 [\fB-S\fR \fIfield\fR] ...
2520 [\fB-t\fR \fItype\fR[,...]] \fIfilesystem\fR|\fIsnapshot\fR
2524 Displays space consumed by, and quotas on, each group in the specified
2525 filesystem or snapshot. This subcommand is identical to \fBzfs userspace\fR,
2526 except that the default types to display are \fB-t posixgroup,smbgroup\fR.
2532 \fB\fBzfs mount\fR\fR
2536 Displays all \fBZFS\fR file systems currently mounted.
2542 \fB\fBzfs mount\fR [\fB-vO\fR] [\fB-o\fR \fIoptions\fR] \fB-a\fR | \fIfilesystem\fR\fR
2546 Mounts \fBZFS\fR file systems. This is invoked automatically as part of the boot process.
2550 \fB\fB-o\fR \fIoptions\fR\fR
2554 An optional, comma-separated list of mount options to use temporarily for the
2555 duration of the mount. See the "Temporary Mount Point Properties" section for
2566 Allow mounting the filesystem even if the target directory is not empty.
2568 On Solaris, the behavior of \fBzfs mount\fR matches \fBmount\fR and \fBzfs mount -O\fR matches \fBmount -O\fR. See \fBmount\fR(1M).
2570 On Linux, this is the default for \fBmount\fR(8). In other words, \fBzfs mount -O\fR matches \fBmount\fR and there is no \fBmount\fR equivalent to a plain \fBzfs mount\fR.
2580 Report mount progress. This is intended for use with \fBzfs mount -a\fR on a system with a significant number of filesystems.
2590 Mount all available \fBZFS\fR file systems. Invoked automatically as part of
2597 \fB\fIfilesystem\fR\fR
2601 Mount the specified filesystem.
2609 \fB\fBzfs unmount\fR [\fB-f\fR] \fB-a\fR | \fIfilesystem\fR|\fImountpoint\fR\fR
2613 Unmounts currently mounted \fBZFS\fR file systems. Invoked automatically as part of the shutdown process.
2621 Forcefully unmount the file system, even if it is currently in use.
2631 Unmount all available \fBZFS\fR file systems. Invoked automatically as part of the shutdown process.
2637 \fIfilesystem\fR|\fImountpoint\fR
2641 Unmount the specified filesystem. The command can also be given a path to a \fBZFS\fR file system mount point on the system.
2649 \fB\fBzfs share\fR [\fBnfs\fR|\fBsmb\fR] \fB-a\fR | \fIfilesystem\fR\fR
2653 Shares available \fBZFS\fR file systems.
2661 Share all available \fBZFS\fR file systems. Invoked automatically as part of the boot process. Additionally if one of \fBnfs\fR|\fBsmb\fR protocols is specified only share file systems whose \fBsharenfs\fR|\fBsharesmb\fR is set.
2667 \fB\fIfilesystem\fR\fR
2671 Share the specified filesystem according to the \fBsharenfs\fR and \fBsharesmb\fR properties. File systems are shared when the \fBsharenfs\fR or \fBsharesmb\fR property is set.
2679 \fB\fBzfs unshare\fR [\fBnfs\fR|\fBsmb\fR] \fB-a\fR | \fIfilesystem\fR|\fImountpoint\fR\fR
2683 Unshares currently shared \fBZFS\fR file systems. This is invoked automatically as part of the shutdown process. Additionally if one of \fBnfs\fR|\fBsmb\fR is specified unshare only file systems currently shared by that protocol.
2691 Unshare all available \fBZFS\fR file systems. Invoked automatically as part of the boot process.
2697 \fB\fIfilesystem\fR|\fImountpoint\fR\fR
2701 Unshare the specified filesystem. The command can also be given a path to a \fBZFS\fR file system shared on the system.
2709 \fB\fBzfs bookmark\fR \fIsnapshot\fR \fIbookmark\fR\fR
2713 Creates a bookmark of the given snapshot. Bookmarks mark the point in time
2714 when the snapshot was created, and can be used as the incremental source for
2715 a \fBzfs send\fR command.
2717 This feature must be enabled to be used.
2718 See \fBzpool-features\fR(5) for details on ZFS feature flags and the
2719 \fBbookmarks\fR feature.
2727 \fBzfs send\fR [\fB-DnPpRveLc\fR] [\fB-\fR[\fBiI\fR] \fIsnapshot\fR] \fIsnapshot\fR
2731 Creates a stream representation of the (second, if \fB-i\fR is specified) \fIsnapshot\fR, which is written to standard output. The output can be redirected to a file or to a pipe (for example, using \fBssh\fR(1) to send it to a different system with \fBzfs receive\fR). By default, a full stream is generated; specifying \fB-i\fR or \fB-I\fR changes this behavior.
2735 \fB\fB-i\fR \fIsnapshot\fR\fR
2739 Generate an incremental stream from the first \fIsnapshot\fR (the incremental source) to the second \fIsnapshot\fR (the incremental target). The incremental source can be specified as the last component of the snapshot name (the \fB@\fR character and following) and it is assumed to be from the same file system as the incremental target.
2741 If the destination is a clone, the source may be the origin snapshot, which must be fully specified (for example, \fBpool/fs@origin\fR, not just \fB@origin\fR).
2747 \fB\fB-I\fR \fIsnapshot\fR\fR
2751 Generate a stream package that sends all intermediary snapshots from the first snapshot to the second snapshot. For example, \fB-I @a fs@d\fR is similar to \fB-i @a fs@b; -i @b fs@c; -i @c fs@d\fR. The incremental source may be specified as with the \fB-i\fR option.
2761 Generate a replication stream package, which will replicate the specified filesystem, and all descendent file systems, up to the named snapshot. When received, all properties, snapshots, descendent file systems, and clones are preserved.
2763 If the \fB-i\fR or \fB-I\fR flags are used in conjunction with the \fB-R\fR flag, an incremental replication stream is generated. The current values of properties, and current snapshot and file system names are set when the stream is received. If the \fB-F\fR flag is specified when this stream is received, snapshots and file systems that do not exist on the sending side are destroyed.
2773 Generate a deduplicated stream. Blocks which would have been sent multiple times in the send stream will only be sent once. The receiving system must also support this feature to receive a deduplicated stream. This flag can be used regardless of the dataset's dedup property, but performance will be much better if the filesystem uses a dedup-capable checksum (eg. sha256).
2783 Generate a stream which may contain blocks larger than 128KiB. This flag
2784 has no effect if the \fBlarge_blocks\fR pool feature is disabled, or if
2785 the \fRrecordsize\fR property of this filesystem has never been set above
2786 128KiB. The receiving system must have the \fBlarge_blocks\fR pool feature
2787 enabled as well. See \fBzpool-features\fR(5) for details on ZFS feature
2788 flags and the \fBlarge_blocks\fR feature.
2798 Generate a more compact stream by using WRITE_EMBEDDED records for blocks
2799 which are stored more compactly on disk by the \fBembedded_data\fR pool
2800 feature. This flag has no effect if the \fBembedded_data\fR feature is
2801 disabled. The receiving system must have the \fBembedded_data\fR feature
2802 enabled. If the \fBlz4_compress\fR feature is active on the sending system,
2803 then the receiving system must have that feature enabled as well. See
2804 \fBzpool-features\fR(5) for details on ZFS feature flags and the
2805 \fBembedded_data\fR feature.
2811 \fB\fB-c\fR, \fB--compressed\fR\fR
2815 Generate a more compact stream by using compressed WRITE records for blocks
2816 which are compressed on disk and in memory (see the \fBcompression\fR property
2817 for details). If the \fBlz4_compress\fR feature is active on the sending
2818 system, then the receiving system must have that feature enabled as well. If
2819 the \fBlarge_blocks\fR feature is enabled on the sending system but the \fB-L\fR
2820 option is not supplied in conjunction with \fB-c\fR, then the data will be
2821 decompressed before sending so it can be split into smaller block sizes.
2831 Include the dataset's properties in the stream. This flag is implicit when -R is specified. The receiving system must also support this feature.
2841 Do a dry-run ("No-op") send. Do not generate any actual send data. This is
2842 useful in conjunction with the \fB-v\fR or \fB-P\fR flags to determine what
2843 data will be sent. In this case, the verbose output will be written to
2844 standard output (contrast with a non-dry-run, where the stream is written
2845 to standard output and the verbose output goes to standard error).
2855 Print machine-parsable verbose information about the stream package generated.
2865 Print verbose information about the stream package generated. This information
2866 includes a per-second report of how much data has been sent.
2869 The format of the stream is committed. You will be able to receive your streams on future versions of \fBZFS\fR.
2876 \fBzfs send\fR [\fB-Lec\fR] [\fB-i\fR \fIsnapshot\fR|\fIbookmark\fR] \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR
2880 Generate a send stream, which may be of a filesystem, and may be
2881 incremental from a bookmark. If the destination is a filesystem or volume,
2882 the pool must be read-only, or the filesystem must not be mounted. When the
2883 stream generated from a filesystem or volume is received, the default snapshot
2884 name will be "--head--".
2893 Generate a stream which may contain blocks larger than 128KiB. This flag
2894 has no effect if the \fBlarge_blocks\fR pool feature is disabled, or if
2895 the \fRrecordsize\fR property of this filesystem has never been set above
2896 128KiB. The receiving system must have the \fBlarge_blocks\fR pool feature
2897 enabled as well. See \fBzpool-features\fR(5) for details on ZFS feature
2898 flags and the \fBlarge_blocks\fR feature.
2908 Generate a more compact stream by using WRITE_EMBEDDED records for blocks
2909 which are stored more compactly on disk by the \fBembedded_data\fR pool
2910 feature. This flag has no effect if the \fBembedded_data\fR feature is
2911 disabled. The receiving system must have the \fBembedded_data\fR feature
2912 enabled. If the \fBlz4_compress\fR feature is active on the sending system,
2913 then the receiving system must have that feature enabled as well. See
2914 \fBzpool-features\fR(5) for details on ZFS feature flags and the
2915 \fBembedded_data\fR feature.
2921 \fB\fB-c\fR, \fB--compressed\fR\fR
2925 Generate a more compact stream by using compressed WRITE records for blocks
2926 which are compressed on disk and in memory (see the \fBcompression\fR property
2927 for details). If the \fBlz4_compress\fR feature is active on the sending
2928 system, then the receiving system must have that feature enabled as well. If
2929 the \fBlarge_blocks\fR feature is enabled on the sending system but the \fB-L\fR
2930 option is not supplied in conjunction with \fB-c\fR, then the data will be
2931 decompressed before sending so it can be split into smaller block sizes.
2937 \fB-i\fR \fIsnapshot\fR|\fIbookmark\fR
2941 Generate an incremental send stream. The incremental source must be an earlier snapshot in the destination's history. It will commonly be an earlier snapshot in the destination's filesystem, in which case it can be specified as the last component of the name (the \fB#\fR or \fB@\fR character and following).
2943 If the incremental target is a clone, the incremental source can be the origin snapshot, or an earlier snapshot in the origin's filesystem, or the origin's origin, etc.
2950 \fB\fBzfs send\fR [\fB-Penv\fR] \fB-t\fR \fIreceive_resume_token\fR\fR
2954 Creates a send stream which resumes an interrupted receive. The \fIreceive_resume_token\fR is the value of this property on the filesystem or volume that was being received into. See the documentation for \fBzfs receive -s\fR for more details.
2962 \fB\fBzfs receive\fR [\fB-Fnsuv\fR] [\fB-o origin\fR=\fIsnapshot\fR] \fIfilesystem\fR|\fIvolume\fR|\fIsnapshot\fR\fR
2966 \fB\fBzfs receive\fR [\fB-Fnsuv\fR] [\fB-d\fR|\fB-e\fR] [\fB-o origin\fR=\fIsnapshot\fR] \fIfilesystem\fR\fR
2970 Creates a snapshot whose contents are as specified in the stream provided on standard input. If a full stream is received, then a new file system is created as well. Streams are created using the \fBzfs send\fR subcommand, which by default creates a full stream. \fBzfs recv\fR can be used as an alias for \fBzfs receive\fR.
2972 If an incremental stream is received, then the destination file system must already exist, and its most recent snapshot must match the incremental stream's source. For \fBzvols\fR, the destination device link is destroyed and recreated, which means the \fBzvol\fR cannot be accessed during the \fBreceive\fR operation.
2974 When a snapshot replication package stream that is generated by using the \fBzfs send\fR \fB-R\fR command is received, any snapshots that do not exist on the sending location are destroyed by using the \fBzfs destroy\fR \fB-d\fR command.
2976 The name of the snapshot (and file system, if a full stream is received) that this subcommand creates depends on the argument type and the use of the \fB-d\fR or \fB-e\fR options.
2978 If the argument is a snapshot name, the specified \fIsnapshot\fR is created. If the argument is a file system or volume name, a snapshot with the same name as the sent snapshot is created within the specified \fIfilesystem\fR or \fIvolume\fR. If neither of the \fB-d\fR or \fB-e\fR options are specified, the provided target snapshot name is used exactly as provided.
2980 The \fB-d\fR and \fB-e\fR options cause the file system name of the target snapshot to be determined by appending a portion of the sent snapshot's name to the specified target \fIfilesystem\fR. If the \fB-d\fR option is specified, all but the first element of the sent snapshot's file system path (usually the pool name) is used and any required intermediate file systems within the specified one are created. If the \fB-e\fR option is specified, then only the last element of the sent snapshot's file system name (i.e. the name of the source file system itself) is used as the target file system name.
2988 Force a rollback of the file system to the most recent snapshot before performing the receive operation. If receiving an incremental replication stream (for example, one generated by \fBzfs send -R -[iI]\fR), destroy snapshots and file systems that do not exist on the sending side.
2999 Do not actually receive the stream. This can be useful in conjunction with the \fB-v\fR option to verify the name the receive operation would use.
3009 If the receive is interrupted, save the partially received state, rather than deleting it. Interruption may be due to premature termination of the stream (e.g. due to network failure or failure of the remote system if the stream is being read over a network connection), a checksum error in the stream, termination of the \fBzfs receive\fR process, or unclean shutdown of the system.
3011 The receive can be resumed with a stream generated by \fBzfs send -t\fR token, where the \fItoken\fR is the value of the \fBreceive_resume_token\fR property of the filesystem or volume which is received into.
3013 To use this flag, the storage pool must have the \fBextensible_dataset\fR feature enabled. See \fBzpool-features\fR(5) for details on ZFS feature flags.
3023 Do not mount the file system that is associated with the received stream.
3033 Print verbose information about the stream and the time required to perform the receive operation.
3043 Discard the first element of the sent snapshot's file system name, using the remaining elements to determine the name of the target file system for the new snapshot as described in the paragraph above.
3053 Discard all but the last element of the sent snapshot's file system name, using that element to determine the name of the target file system for the new snapshot as described in the paragraph above.
3059 \fB\fB-o\fR \fBorigin\fR=\fIsnapshot\fR
3063 Forces the stream to be received as a clone of the given snapshot.
3064 If the stream is a full send stream, this will create the filesystem
3065 described by the stream as a clone of the specified snapshot. Which
3066 snapshot was specified will not affect the success or failure of the
3067 receive, as long as the snapshot does exist. If the stream is an
3068 incremental send stream, all the normal verification will be performed.
3076 \fB\fBzfs receive\fR [\fB-A\fR] \fIfilesystem\fR|\fIvolume\fR
3080 Abort an interrupted \fBzfs receive \fB-s\fR\fR, deleting its saved partially received state.
3087 \fB\fBzfs allow\fR \fIfilesystem\fR | \fIvolume\fR\fR
3091 Displays permissions that have been delegated on the specified filesystem or volume. See the other forms of \fBzfs allow\fR for more information.
3093 Delegations are supported under Linux with the exception of \fBmount\fR,
3094 \fBunmount\fR, \fBmountpoint\fR, \fBcanmount\fR, \fBrename\fR, and \fBshare\fR.
3095 These permissions cannot be delegated because the Linux \fBmount(8)\fR command
3096 restricts modifications of the global namespace to the root user.
3102 \fB\fBzfs allow\fR [\fB-ldug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...] \fIperm\fR|@\fIsetname\fR[,...] \fIfilesystem\fR| \fIvolume\fR\fR
3106 \fB\fBzfs allow\fR [\fB-ld\fR] \fB-e\fR \fIperm\fR|@\fIsetname\fR[,...] \fIfilesystem\fR | \fIvolume\fR\fR
3110 Delegates \fBZFS\fR administration permission for the file systems to non-privileged users.
3114 \fB[\fB-ug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...]\fR
3118 Specifies to whom the permissions are delegated. Multiple entities can be specified as a comma-separated list. If neither of the \fB-ug\fR options are specified, then the argument is interpreted preferentially as the keyword "everyone", then as a user name, and lastly as a group name. To specify a user or group named "everyone", use the \fB-u\fR or \fB-g\fR options. To specify a group with the same name as a user, use the \fB-g\fR options.
3124 \fB[\fB-e\fR] \fIperm\fR|@\fIsetname\fR[,...]\fR
3128 Specifies that the permissions be delegated to "everyone." Multiple permissions may be specified as a comma-separated list. Permission names are the same as \fBZFS\fR subcommand and property names. See the property list below. Property set names, which begin with an at sign (\fB@\fR) , may be specified. See the \fB-s\fR form below for details.
3134 \fB[\fB-ld\fR] \fIfilesystem\fR|\fIvolume\fR\fR
3138 Specifies where the permissions are delegated. If neither of the \fB-ld\fR options are specified, or both are, then the permissions are allowed for the file system or volume, and all of its descendents. If only the \fB-l\fR option is used, then is allowed "locally" only for the specified file system. If only the \fB-d\fR option is used, then is allowed only for the descendent file systems.
3145 Permissions are generally the ability to use a \fBzfs\fR subcommand or change a property. The following permissions are available:
3150 allow subcommand Must also have the permission that is being
3152 clone subcommand Must also have the 'create' ability and 'mount'
3153 ability in the origin file system
3154 create subcommand Must also have the 'mount' ability
3155 destroy subcommand Must also have the 'mount' ability
3156 diff subcommand Allows lookup of paths within a dataset
3157 given an object number, and the ability to
3158 create snapshots necessary to 'zfs diff'.
3159 mount subcommand Allows mount/umount of ZFS datasets
3160 promote subcommand Must also have the 'mount'
3161 and 'promote' ability in the origin file system
3162 receive subcommand Must also have the 'mount' and 'create' ability
3163 rename subcommand Must also have the 'mount' and 'create'
3164 ability in the new parent
3165 rollback subcommand Must also have the 'mount' ability
3167 share subcommand Allows sharing file systems over NFS or SMB
3169 snapshot subcommand Must also have the 'mount' ability
3170 groupobjquota other Allows accessing any groupobjquota@... property
3171 groupquota other Allows accessing any groupquota@... property
3172 groupobjused other Allows reading any groupobjused@... property
3173 groupused other Allows reading any groupused@... property
3174 userprop other Allows changing any user property
3175 userobjquota other Allows accessing any userobjquota@... property
3176 userquota other Allows accessing any userquota@... property
3177 userobjused other Allows reading any userobjused@... property
3178 userused other Allows reading any userused@... property
3184 casesensitivity property
3186 compression property
3191 filesystem_limit property
3196 normalization property
3197 primarycache property
3202 refreservation property
3203 reservation property
3204 secondarycache property
3209 snapshot_limit property
3212 volblocksize property
3224 \fB\fBzfs allow\fR \fB-c\fR \fIperm\fR|@\fIsetname\fR[,...] \fIfilesystem\fR|\fIvolume\fR\fR
3228 Sets "create time" permissions. These permissions are granted (locally) to the creator of any newly-created descendent file system.
3234 \fB\fBzfs allow\fR \fB-s\fR @\fIsetname\fR \fIperm\fR|@\fIsetname\fR[,...] \fIfilesystem\fR|\fIvolume\fR\fR
3238 Defines or adds permissions to a permission set. The set can be used by other \fBzfs allow\fR commands for the specified file system and its descendents. Sets are evaluated dynamically, so changes to a set are immediately reflected. Permission sets follow the same naming restrictions as ZFS file systems, but the name must begin with an "at sign" (\fB@\fR), and can be no more than 64 characters long.
3244 \fB\fBzfs unallow\fR [\fB-rldug\fR] "\fIeveryone\fR"|\fIuser\fR|\fIgroup\fR[,...] [\fIperm\fR|@\fIsetname\fR[, ...]] \fIfilesystem\fR|\fIvolume\fR\fR
3248 \fB\fBzfs unallow\fR [\fB-rld\fR] \fB-e\fR [\fIperm\fR|@\fIsetname\fR [,...]] \fIfilesystem\fR|\fIvolume\fR\fR
3252 \fB\fBzfs unallow\fR [\fB-r\fR] \fB-c\fR [\fIperm\fR|@\fIsetname\fR[,...]]\fR \fB\fIfilesystem\fR|\fIvolume\fR\fR
3256 Removes permissions that were granted with the \fBzfs allow\fR command. No permissions are explicitly denied, so other permissions granted are still in effect. For example, if the permission is granted by an ancestor. If no permissions are specified, then all permissions for the specified \fIuser\fR, \fIgroup\fR, or \fIeveryone\fR are removed. Specifying "everyone" (or using the \fB-e\fR option) only removes the permissions that were granted to "everyone", not all permissions for every user and group. See the \fBzfs allow\fR command for a description of the \fB-ldugec\fR options.
3264 Recursively remove the permissions from this file system and all descendents.
3272 \fB\fBzfs unallow\fR [\fB-r\fR] \fB-s\fR @\fIsetname\fR [\fIperm\fR|@\fIsetname\fR[,...]]\fR \fB\fIfilesystem\fR|\fIvolume\fR\fR
3276 Removes permissions from a permission set. If no permissions are specified, then all permissions are removed, thus removing the set entirely.
3282 \fB\fBzfs hold\fR [\fB-r\fR] \fItag\fR \fIsnapshot\fR...\fR
3286 Adds a single reference, named with the \fItag\fR argument, to the specified snapshot or snapshots. Each snapshot has its own tag namespace, and tags must be unique within that space.
3288 If a hold exists on a snapshot, attempts to destroy that snapshot by using the \fBzfs destroy\fR command return \fBEBUSY\fR.
3296 Specifies that a hold with the given tag is applied recursively to the snapshots of all descendent file systems.
3304 \fB\fBzfs holds\fR [\fB-r\fR] \fIsnapshot\fR...\fR
3308 Lists all existing user references for the given snapshot or snapshots.
3316 Lists the holds that are set on the named descendent snapshots, in addition to listing the holds on the named snapshot.
3324 \fB\fBzfs release\fR [\fB-r\fR] \fItag\fR \fIsnapshot\fR...\fR
3328 Removes a single reference, named with the \fItag\fR argument, from the specified snapshot or snapshots. The tag must already exist for each snapshot.
3336 Recursively releases a hold with the given tag on the snapshots of all descendent file systems.
3344 \fB\fBzfs diff\fR [\fB-FHt\fR] \fIsnapshot\fR \fIsnapshot\fR|\fIfilesystem\fR
3348 Display the difference between a snapshot of a given filesystem and another
3349 snapshot of that filesystem from a later time or the current contents of the
3350 filesystem. The first column is a character indicating the type of change,
3351 the other columns indicate pathname, new pathname (in case of rename), change
3352 in link count, and optionally file type and/or change time.
3354 The types of change are:
3357 - The path has been removed
3358 + The path has been created
3359 M The path has been modified
3360 R The path has been renamed
3370 Display an indication of the type of file, in a manner similar to the \fB-F\fR
3371 option of \fBls\fR(1).
3393 Give more parsable tab-separated output, without header lines and without arrows.
3402 Display the path's inode change time as the first column of output.
3407 \fBExample 1 \fRCreating a ZFS File System Hierarchy
3410 The following commands create a file system named \fBpool/home\fR and a file system named \fBpool/home/bob\fR. The mount point \fB/export/home\fR is set for the parent file system, and is automatically inherited by the child file system.
3415 # \fBzfs create pool/home\fR
3416 # \fBzfs set mountpoint=/export/home pool/home\fR
3417 # \fBzfs create pool/home/bob\fR
3423 \fBExample 2 \fRCreating a ZFS Snapshot
3426 The following command creates a snapshot named \fBbackup\fR. This snapshot is mounted on demand in the \fB\&.zfs/snapshot\fR directory at the root of the \fBpool/home/bob\fR file system.
3431 # \fBzfs snapshot pool/home/bob@backup\fR
3437 \fBExample 3 \fRCreating and Destroying Multiple Snapshots
3440 The following command creates snapshots named \fBbackup\fR of \fBpool/home\fR and all of its descendent file systems. Each snapshot is mounted on demand in the \fB\&.zfs/snapshot\fR directory at the root of its file system. The second command destroys the newly created snapshots.
3445 # \fBzfs snapshot -r pool/home@backup\fR
3446 # \fBzfs destroy -r pool/home@backup\fR
3452 \fBExample 4 \fRDisabling and Enabling File System Compression
3455 The following command disables the \fBcompression\fR property for all file systems under \fBpool/home\fR. The next command explicitly enables \fBcompression\fR for \fBpool/home/anne\fR.
3460 # \fBzfs set compression=off pool/home\fR
3461 # \fBzfs set compression=on pool/home/anne\fR
3467 \fBExample 5 \fRListing ZFS Datasets
3470 The following command lists all active file systems and volumes in the system. Snapshots are displayed if the pool's \fBlistsnapshots\fR property is \fBon\fR (the default is \fBoff\fR). See \fBzpool\fR(8) for more information on pool properties.
3476 NAME USED AVAIL REFER MOUNTPOINT
3477 pool 450K 457G 18K /pool
3478 pool/home 315K 457G 21K /export/home
3479 pool/home/anne 18K 457G 18K /export/home/anne
3480 pool/home/bob 276K 457G 276K /export/home/bob
3486 \fBExample 6 \fRSetting a Quota on a ZFS File System
3489 The following command sets a quota of 50 GiB for \fBpool/home/bob\fR.
3494 # \fBzfs set quota=50G pool/home/bob\fR
3500 \fBExample 7 \fRListing ZFS Properties
3503 The following command lists all properties for \fBpool/home/bob\fR.
3508 # \fBzfs get all pool/home/bob\fR
3509 NAME PROPERTY VALUE SOURCE
3510 pool/home/bob type filesystem -
3511 pool/home/bob creation Tue Jul 21 15:53 2009 -
3512 pool/home/bob used 21K -
3513 pool/home/bob available 20.0G -
3514 pool/home/bob referenced 21K -
3515 pool/home/bob compressratio 1.00x -
3516 pool/home/bob mounted yes -
3517 pool/home/bob quota 20G local
3518 pool/home/bob reservation none default
3519 pool/home/bob recordsize 128K default
3520 pool/home/bob mountpoint /pool/home/bob default
3521 pool/home/bob sharenfs off default
3522 pool/home/bob checksum on default
3523 pool/home/bob compression on local
3524 pool/home/bob atime on default
3525 pool/home/bob devices on default
3526 pool/home/bob exec on default
3527 pool/home/bob setuid on default
3528 pool/home/bob readonly off default
3529 pool/home/bob zoned off default
3530 pool/home/bob snapdir hidden default
3531 pool/home/bob acltype off default
3532 pool/home/bob aclinherit restricted default
3533 pool/home/bob canmount on default
3534 pool/home/bob xattr on default
3535 pool/home/bob copies 1 default
3536 pool/home/bob version 4 -
3537 pool/home/bob utf8only off -
3538 pool/home/bob normalization none -
3539 pool/home/bob casesensitivity sensitive -
3540 pool/home/bob vscan off default
3541 pool/home/bob nbmand off default
3542 pool/home/bob sharesmb off default
3543 pool/home/bob refquota none default
3544 pool/home/bob refreservation none default
3545 pool/home/bob primarycache all default
3546 pool/home/bob secondarycache all default
3547 pool/home/bob usedbysnapshots 0 -
3548 pool/home/bob usedbydataset 21K -
3549 pool/home/bob usedbychildren 0 -
3550 pool/home/bob usedbyrefreservation 0 -
3551 pool/home/bob logbias latency default
3552 pool/home/bob dedup off default
3553 pool/home/bob mlslabel none default
3554 pool/home/bob relatime off default
3561 The following command gets a single property value.
3566 # \fBzfs get -H -o value compression pool/home/bob\fR
3574 The following command lists all properties with local settings for \fBpool/home/bob\fR.
3579 # \fBzfs get -r -s local -o name,property,value all pool/home/bob\fR
3581 pool/home/bob quota 20G
3582 pool/home/bob compression on
3588 \fBExample 8 \fRRolling Back a ZFS File System
3591 The following command reverts the contents of \fBpool/home/anne\fR to the snapshot named \fByesterday\fR, deleting all intermediate snapshots.
3596 # \fBzfs rollback -r pool/home/anne@yesterday\fR
3602 \fBExample 9 \fRCreating a ZFS Clone
3605 The following command creates a writable file system whose initial contents are the same as \fBpool/home/bob@yesterday\fR.
3610 # \fBzfs clone pool/home/bob@yesterday pool/clone\fR
3616 \fBExample 10 \fRPromoting a ZFS Clone
3619 The following commands illustrate how to test out changes to a file system, and then replace the original file system with the changed one, using clones, clone promotion, and renaming:
3624 # \fBzfs create pool/project/production\fR
3625 populate /pool/project/production with data
3626 # \fBzfs snapshot pool/project/production@today\fR
3627 # \fBzfs clone pool/project/production@today pool/project/beta\fR
3628 make changes to /pool/project/beta and test them
3629 # \fBzfs promote pool/project/beta\fR
3630 # \fBzfs rename pool/project/production pool/project/legacy\fR
3631 # \fBzfs rename pool/project/beta pool/project/production\fR
3632 once the legacy version is no longer needed, it can be destroyed
3633 # \fBzfs destroy pool/project/legacy\fR
3639 \fBExample 11 \fRInheriting ZFS Properties
3642 The following command causes \fBpool/home/bob\fR and \fBpool/home/anne\fR to inherit the \fBchecksum\fR property from their parent.
3647 # \fBzfs inherit checksum pool/home/bob pool/home/anne\fR
3652 The following command causes \fBpool/home/bob\fR to revert to the received
3653 value for the \fBquota\fR property if it exists.
3658 # \fBzfs inherit -S quota pool/home/bob
3664 \fBExample 12 \fRRemotely Replicating ZFS Data
3667 The following commands send a full stream and then an incremental stream to a remote machine, restoring them into \fBpoolB/received/fs@a\fRand \fBpoolB/received/fs@b\fR, respectively. \fBpoolB\fR must contain the file system \fBpoolB/received\fR, and must not initially contain \fBpoolB/received/fs\fR.
3672 # \fBzfs send pool/fs@a | \e\fR
3673 \fBssh host zfs receive poolB/received/fs@a\fR
3674 # \fBzfs send -i a pool/fs@b | ssh host \e\fR
3675 \fBzfs receive poolB/received/fs\fR
3681 \fBExample 13 \fRUsing the \fBzfs receive\fR \fB-d\fR Option
3684 The following command sends a full stream of \fBpoolA/fsA/fsB@snap\fR to a remote machine, receiving it into \fBpoolB/received/fsA/fsB@snap\fR. The \fBfsA/fsB@snap\fR portion of the received snapshot's name is determined from the name of the sent snapshot. \fBpoolB\fR must contain the file system \fBpoolB/received\fR. If \fBpoolB/received/fsA\fR does not exist, it is created as an empty file system.
3689 # \fBzfs send poolA/fsA/fsB@snap | \e
3690 ssh host zfs receive -d poolB/received\fR
3696 \fBExample 14 \fRSetting User Properties
3699 The following example sets the user-defined \fBcom.example:department\fR property for a dataset.
3704 # \fBzfs set com.example:department=12345 tank/accounting\fR
3710 \fBExample 15 \fRPerforming a Rolling Snapshot
3713 The following example shows how to maintain a history of snapshots with a consistent naming scheme. To keep a week's worth of snapshots, the user destroys the oldest snapshot, renames the remaining snapshots, and then creates a new snapshot, as follows:
3718 # \fBzfs destroy -r pool/users@7daysago\fR
3719 # \fBzfs rename -r pool/users@6daysago @7daysago\fR
3720 # \fBzfs rename -r pool/users@5daysago @6daysago\fR
3721 # \fBzfs rename -r pool/users@4daysago @5daysago\fR
3722 # \fBzfs rename -r pool/users@3daysago @4daysago\fR
3723 # \fBzfs rename -r pool/users@2daysago @3daysago\fR
3724 # \fBzfs rename -r pool/users@yesterday @2daysago\fR
3725 # \fBzfs rename -r pool/users@today @yesterday\fR
3726 # \fBzfs snapshot -r pool/users@today\fR
3732 \fBExample 16 \fRSetting \fBsharenfs\fR Property Options on a ZFS File System
3735 The following commands show how to set \fBsharenfs\fR property options to enable \fBrw\fR access for a set of \fBIP\fR addresses and to enable root access for system \fBneo\fR on the \fBtank/home\fR file system.
3740 # \fBzfs set sharenfs='rw=@123.123.0.0/16,root=neo' tank/home\fR
3747 If you are using \fBDNS\fR for host name resolution, specify the fully qualified hostname.
3751 If you want to access snapdir through NFS, be sure to add \fBcrossmnt\fR to the options.
3754 \fBExample 17 \fRDelegating ZFS Administration Permissions on a ZFS Dataset
3756 The following example shows how to set permissions so that user \fBcindys\fR can create, destroy, mount, and take snapshots on \fBtank/cindys\fR. The permissions on \fBtank/cindys\fR are also displayed.
3761 # \fBzfs allow cindys create,destroy,mount,snapshot tank/cindys\fR
3762 # \fBzfs allow tank/cindys\fR
3763 -------------------------------------------------------------
3764 Local+Descendent permissions on (tank/cindys)
3765 user cindys create,destroy,mount,snapshot
3766 -------------------------------------------------------------
3773 Because the \fBtank/cindys\fR mount point permission is set to 755 by default, user \fBcindys\fR will be unable to mount file systems under \fBtank/cindys\fR. Set an \fBACL\fR similar to the following syntax to provide mount point access:
3777 # \fBchmod A+user:cindys:add_subdirectory:allow /tank/cindys\fR
3783 \fBExample 18 \fRDelegating Create Time Permissions on a ZFS Dataset
3786 The following example shows how to grant anyone in the group \fBstaff\fR to create file systems in \fBtank/users\fR. This syntax also allows staff members to destroy their own file systems, but not destroy anyone else's file system. The permissions on \fBtank/users\fR are also displayed.
3791 # \fBzfs allow staff create,mount tank/users\fR
3792 # \fBzfs allow -c destroy tank/users\fR
3793 # \fBzfs allow tank/users\fR
3794 -------------------------------------------------------------
3795 Create time permissions on (tank/users)
3797 Local+Descendent permissions on (tank/users)
3798 group staff create,mount
3799 -------------------------------------------------------------
3805 \fBExample 19 \fRDefining and Granting a Permission Set on a ZFS Dataset
3808 The following example shows how to define and grant a permission set on the \fBtank/users\fR file system. The permissions on \fBtank/users\fR are also displayed.
3813 # \fBzfs allow -s @pset create,destroy,snapshot,mount tank/users\fR
3814 # \fBzfs allow staff @pset tank/users\fR
3815 # \fBzfs allow tank/users\fR
3816 -------------------------------------------------------------
3817 Permission sets on (tank/users)
3818 @pset create,destroy,mount,snapshot
3819 Create time permissions on (tank/users)
3821 Local+Descendent permissions on (tank/users)
3822 group staff @pset,create,mount
3823 -------------------------------------------------------------
3829 \fBExample 20 \fRDelegating Property Permissions on a ZFS Dataset
3832 The following example shows to grant the ability to set quotas and reservations on the \fBusers/home\fR file system. The permissions on \fBusers/home\fR are also displayed.
3837 # \fBzfs allow cindys quota,reservation users/home\fR
3838 # \fBzfs allow users/home\fR
3839 -------------------------------------------------------------
3840 Local+Descendent permissions on (users/home)
3841 user cindys quota,reservation
3842 -------------------------------------------------------------
3843 cindys% \fBzfs set quota=10G users/home/marks\fR
3844 cindys% \fBzfs get quota users/home/marks\fR
3845 NAME PROPERTY VALUE SOURCE
3846 users/home/marks quota 10G local
3852 \fBExample 21 \fRRemoving ZFS Delegated Permissions on a ZFS Dataset
3855 The following example shows how to remove the snapshot permission from the \fBstaff\fR group on the \fBtank/users\fR file system. The permissions on \fBtank/users\fR are also displayed.
3860 # \fBzfs unallow staff snapshot tank/users\fR
3861 # \fBzfs allow tank/users\fR
3862 -------------------------------------------------------------
3863 Permission sets on (tank/users)
3864 @pset create,destroy,mount,snapshot
3865 Create time permissions on (tank/users)
3867 Local+Descendent permissions on (tank/users)
3868 group staff @pset,create,mount
3869 -------------------------------------------------------------
3875 \fBExample 22\fR Showing the differences between a snapshot and a ZFS Dataset
3878 The following example shows how to see what has changed between a prior
3879 snapshot of a ZFS Dataset and its current state. The \fB-F\fR option is used
3880 to indicate type information for the files affected.
3885 # zfs diff -F tank/test@before tank/test
3887 M F /tank/test/linked (+1)
3888 R F /tank/test/oldname -> /tank/test/newname
3889 - F /tank/test/deleted
3890 + F /tank/test/created
3891 M F /tank/test/modified
3897 \fBExample 23\fR Creating a bookmark
3900 The following example create a bookmark to a snapshot. This bookmark can then
3901 be used instead of snapshot in send streams.
3906 # zfs bookmark rpool@snapshot rpool#bookmark
3911 .SH "ENVIRONMENT VARIABLES"
3914 Cause \fBzfs\fR to dump core on exit for the purposes of running \fB::findleaks\fR.
3918 The following exit values are returned:
3926 Successful completion.
3946 Invalid command line options were specified.
3951 \fBchmod\fR(2), \fBfsync\fR(2), \fBgzip\fR(1), \fBls\fR(1), \fBmount\fR(8), \fBopen\fR(2), \fBreaddir\fR(3), \fBssh\fR(1), \fBstat\fR(2), \fBwrite\fR(2), \fBzpool\fR(8), \fBzfs-module-parameters\fR(5)
3953 On Solaris: \fBdfstab(4)\fR, \fBiscsitadm(1M)\fR, \fBmount(1M)\fR, \fBshare(1M)\fR, \fBsharemgr(1M)\fR, \fBunshare(1M)\fR