1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 pkgdatadir = $(datadir)/@PACKAGE@
19 pkgincludedir = $(includedir)/@PACKAGE@
20 pkglibdir = $(libdir)/@PACKAGE@
21 pkglibexecdir = $(libexecdir)/@PACKAGE@
22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23 install_sh_DATA = $(install_sh) -c -m 644
24 install_sh_PROGRAM = $(install_sh) -c
25 install_sh_SCRIPT = $(install_sh) -c
26 INSTALL_HEADER = $(INSTALL_DATA)
27 transform = $(program_transform_name)
34 build_triplet = @build@
36 target_triplet = @target@
38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
40 am__aclocal_m4_deps = \
41 $(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
42 $(top_srcdir)/config/kernel-automount.m4 \
43 $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
44 $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
45 $(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
46 $(top_srcdir)/config/kernel-bdi.m4 \
47 $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
48 $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
49 $(top_srcdir)/config/kernel-bio-failfast.m4 \
50 $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
51 $(top_srcdir)/config/kernel-blk-end-request.m4 \
52 $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
53 $(top_srcdir)/config/kernel-blk-queue-discard.m4 \
54 $(top_srcdir)/config/kernel-blk-queue-flush.m4 \
55 $(top_srcdir)/config/kernel-blk-queue-io-opt.m4 \
56 $(top_srcdir)/config/kernel-blk-queue-max-hw-sectors.m4 \
57 $(top_srcdir)/config/kernel-blk-queue-max-segments.m4 \
58 $(top_srcdir)/config/kernel-blk-queue-nonrot.m4 \
59 $(top_srcdir)/config/kernel-blk-queue-physical-block-size.m4 \
60 $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
61 $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
62 $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
63 $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
64 $(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
65 $(top_srcdir)/config/kernel-check-disk-size-change.m4 \
66 $(top_srcdir)/config/kernel-d-obtain-alias.m4 \
67 $(top_srcdir)/config/kernel-evict-inode.m4 \
68 $(top_srcdir)/config/kernel-fallocate.m4 \
69 $(top_srcdir)/config/kernel-fmode-t.m4 \
70 $(top_srcdir)/config/kernel-fsync.m4 \
71 $(top_srcdir)/config/kernel-get-disk-ro.m4 \
72 $(top_srcdir)/config/kernel-insert-inode-locked.m4 \
73 $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
74 $(top_srcdir)/config/kernel-kobj-name-len.m4 \
75 $(top_srcdir)/config/kernel-mount-nodev.m4 \
76 $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
77 $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
78 $(top_srcdir)/config/kernel-rq-is_sync.m4 \
79 $(top_srcdir)/config/kernel-security-inode-init.m4 \
80 $(top_srcdir)/config/kernel-set-nlink.m4 \
81 $(top_srcdir)/config/kernel-show-options.m4 \
82 $(top_srcdir)/config/kernel-shrink.m4 \
83 $(top_srcdir)/config/kernel-truncate-setsize.m4 \
84 $(top_srcdir)/config/kernel-xattr-handler.m4 \
85 $(top_srcdir)/config/kernel.m4 \
86 $(top_srcdir)/config/user-arch.m4 \
87 $(top_srcdir)/config/user-frame-larger-than.m4 \
88 $(top_srcdir)/config/user-ioctl.m4 \
89 $(top_srcdir)/config/user-libblkid.m4 \
90 $(top_srcdir)/config/user-libuuid.m4 \
91 $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
92 $(top_srcdir)/config/user-selinux.m4 \
93 $(top_srcdir)/config/user-udev.m4 \
94 $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
95 $(top_srcdir)/config/zfs-build.m4 \
96 $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
97 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
99 mkinstalldirs = $(install_sh) -d
100 CONFIG_HEADER = $(top_builddir)/zfs_config.h
102 CONFIG_CLEAN_VPATH_FILES =
103 AM_V_GEN = $(am__v_GEN_$(V))
104 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
105 am__v_GEN_0 = @echo " GEN " $@;
106 AM_V_at = $(am__v_at_$(V))
107 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
111 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
112 html-recursive info-recursive install-data-recursive \
113 install-dvi-recursive install-exec-recursive \
114 install-html-recursive install-info-recursive \
115 install-pdf-recursive install-ps-recursive install-recursive \
116 installcheck-recursive installdirs-recursive pdf-recursive \
117 ps-recursive uninstall-recursive
118 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
119 distclean-recursive maintainer-clean-recursive
120 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
121 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
125 DIST_SUBDIRS = $(SUBDIRS)
126 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
129 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
130 sed_rest='s,^[^/]*/*,,'; \
131 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
132 sed_butlast='s,/*[^/]*$$,,'; \
133 while test -n "$$dir1"; do \
134 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
135 if test "$$first" != "."; then \
136 if test "$$first" = ".."; then \
137 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
138 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
140 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
141 if test "$$first2" = "$$first"; then \
142 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
146 dir0="$$dir0"/"$$first"; \
149 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
154 ALIEN_VERSION = @ALIEN_VERSION@
156 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
158 AUTOCONF = @AUTOCONF@
159 AUTOHEADER = @AUTOHEADER@
160 AUTOMAKE = @AUTOMAKE@
164 CCASDEPMODE = @CCASDEPMODE@
165 CCASFLAGS = @CCASFLAGS@
166 CCDEPMODE = @CCDEPMODE@
169 CPPFLAGS = @CPPFLAGS@
170 CYGPATH_W = @CYGPATH_W@
171 DEBUG_CFLAGS = @DEBUG_CFLAGS@
172 DEBUG_DMU_TX = @DEBUG_DMU_TX@
173 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
174 DEBUG_ZFS = @DEBUG_ZFS@
175 DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
176 DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
177 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
181 DPKGBUILD = @DPKGBUILD@
182 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
183 DPKG_VERSION = @DPKG_VERSION@
184 DSYMUTIL = @DSYMUTIL@
192 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
194 HAVE_ALIEN = @HAVE_ALIEN@
195 HAVE_DPKG = @HAVE_DPKG@
196 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
197 HAVE_MAKEPKG = @HAVE_MAKEPKG@
198 HAVE_PACMAN = @HAVE_PACMAN@
199 HAVE_RPM = @HAVE_RPM@
200 HAVE_RPMBUILD = @HAVE_RPMBUILD@
202 INSTALL_DATA = @INSTALL_DATA@
203 INSTALL_PROGRAM = @INSTALL_PROGRAM@
204 INSTALL_SCRIPT = @INSTALL_SCRIPT@
205 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
206 KERNELCPPFLAGS = @KERNELCPPFLAGS@
207 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
210 LIBBLKID = @LIBBLKID@
213 LIBSELINUX = @LIBSELINUX@
217 LINUX_OBJ = @LINUX_OBJ@
218 LINUX_SYMBOLS = @LINUX_SYMBOLS@
219 LINUX_VERSION = @LINUX_VERSION@
222 LTLIBOBJS = @LTLIBOBJS@
224 MAKEINFO = @MAKEINFO@
226 MAKEPKG_VERSION = @MAKEPKG_VERSION@
230 NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
236 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
237 PACKAGE_NAME = @PACKAGE_NAME@
238 PACKAGE_STRING = @PACKAGE_STRING@
239 PACKAGE_TARNAME = @PACKAGE_TARNAME@
240 PACKAGE_VERSION = @PACKAGE_VERSION@
242 PACMAN_VERSION = @PACMAN_VERSION@
243 PATH_SEPARATOR = @PATH_SEPARATOR@
246 RPMBUILD = @RPMBUILD@
247 RPMBUILD_VERSION = @RPMBUILD_VERSION@
248 RPM_VERSION = @RPM_VERSION@
250 SET_MAKE = @SET_MAKE@
254 SPL_SYMBOLS = @SPL_SYMBOLS@
255 SPL_VERSION = @SPL_VERSION@
257 TARGET_ASM_DIR = @TARGET_ASM_DIR@
260 ZFS_CONFIG = @ZFS_CONFIG@
261 ZFS_META_ALIAS = @ZFS_META_ALIAS@
262 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
263 ZFS_META_DATA = @ZFS_META_DATA@
264 ZFS_META_LICENSE = @ZFS_META_LICENSE@
265 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
266 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
267 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
268 ZFS_META_NAME = @ZFS_META_NAME@
269 ZFS_META_RELEASE = @ZFS_META_RELEASE@
270 ZFS_META_VERSION = @ZFS_META_VERSION@
272 abs_builddir = @abs_builddir@
273 abs_srcdir = @abs_srcdir@
274 abs_top_builddir = @abs_top_builddir@
275 abs_top_srcdir = @abs_top_srcdir@
276 ac_ct_CC = @ac_ct_CC@
277 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
278 am__include = @am__include@
279 am__leading_dot = @am__leading_dot@
280 am__quote = @am__quote@
282 am__untar = @am__untar@
285 build_alias = @build_alias@
286 build_cpu = @build_cpu@
287 build_os = @build_os@
288 build_vendor = @build_vendor@
289 builddir = @builddir@
291 datarootdir = @datarootdir@
294 exec_prefix = @exec_prefix@
296 host_alias = @host_alias@
297 host_cpu = @host_cpu@
299 host_vendor = @host_vendor@
301 includedir = @includedir@
303 install_sh = @install_sh@
305 libexecdir = @libexecdir@
306 localedir = @localedir@
307 localstatedir = @localstatedir@
311 oldincludedir = @oldincludedir@
314 program_transform_name = @program_transform_name@
317 sharedstatedir = @sharedstatedir@
319 sysconfdir = @sysconfdir@
321 target_alias = @target_alias@
322 target_cpu = @target_cpu@
323 target_os = @target_os@
324 target_vendor = @target_vendor@
325 top_build_prefix = @top_build_prefix@
326 top_builddir = @top_builddir@
327 top_srcdir = @top_srcdir@
329 udevruledir = @udevruledir@
334 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
336 case '$(am__configure_deps)' in \
338 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
339 && { if test -f $@; then exit 0; else break; fi; }; \
343 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
344 $(am__cd) $(top_srcdir) && \
345 $(AUTOMAKE) --gnu man/Makefile
347 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
350 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
352 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
353 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
356 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
357 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
359 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
360 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
361 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
362 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
363 $(am__aclocal_m4_deps):
371 # This directory's subdirectories are mostly independent; you can cd
372 # into them and run `make' without going through this Makefile.
373 # To change the values of `make' variables: instead of editing Makefiles,
374 # (1) if the variable is set in `config.status', edit `config.status'
375 # (which will cause the Makefiles to be regenerated when you run `make');
376 # (2) otherwise, pass the desired values on the `make' command line.
377 $(RECURSIVE_TARGETS):
378 @fail= failcom='exit 1'; \
379 for f in x $$MAKEFLAGS; do \
382 *k*) failcom='fail=yes';; \
386 target=`echo $@ | sed s/-recursive//`; \
387 list='$(SUBDIRS)'; for subdir in $$list; do \
388 echo "Making $$target in $$subdir"; \
389 if test "$$subdir" = "."; then \
391 local_target="$$target-am"; \
393 local_target="$$target"; \
395 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
398 if test "$$dot_seen" = "no"; then \
399 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
402 $(RECURSIVE_CLEAN_TARGETS):
403 @fail= failcom='exit 1'; \
404 for f in x $$MAKEFLAGS; do \
407 *k*) failcom='fail=yes';; \
412 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
413 *) list='$(SUBDIRS)' ;; \
415 rev=''; for subdir in $$list; do \
416 if test "$$subdir" = "."; then :; else \
417 rev="$$subdir $$rev"; \
421 target=`echo $@ | sed s/-recursive//`; \
422 for subdir in $$rev; do \
423 echo "Making $$target in $$subdir"; \
424 if test "$$subdir" = "."; then \
425 local_target="$$target-am"; \
427 local_target="$$target"; \
429 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
431 done && test -z "$$fail"
433 list='$(SUBDIRS)'; for subdir in $$list; do \
434 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
437 list='$(SUBDIRS)'; for subdir in $$list; do \
438 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
441 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
442 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
443 unique=`for i in $$list; do \
444 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
446 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
447 END { if (nonempty) { for (i in files) print i; }; }'`; \
451 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
452 $(TAGS_FILES) $(LISP)
455 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
456 include_option=--etags-include; \
459 include_option=--include; \
462 list='$(SUBDIRS)'; for subdir in $$list; do \
463 if test "$$subdir" = .; then :; else \
464 test ! -f $$subdir/TAGS || \
465 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
468 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
469 unique=`for i in $$list; do \
470 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
472 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
473 END { if (nonempty) { for (i in files) print i; }; }'`; \
475 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
476 test -n "$$unique" || unique=$$empty_fix; \
477 if test $$# -gt 0; then \
478 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
481 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
486 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
487 $(TAGS_FILES) $(LISP)
488 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
489 unique=`for i in $$list; do \
490 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
492 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
493 END { if (nonempty) { for (i in files) print i; }; }'`; \
494 test -z "$(CTAGS_ARGS)$$unique" \
495 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
499 here=`$(am__cd) $(top_builddir) && pwd` \
500 && $(am__cd) $(top_srcdir) \
501 && gtags -i $(GTAGS_ARGS) "$$here"
504 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
506 distdir: $(DISTFILES)
507 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
508 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
509 list='$(DISTFILES)'; \
510 dist_files=`for file in $$list; do echo $$file; done | \
511 sed -e "s|^$$srcdirstrip/||;t" \
512 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
513 case $$dist_files in \
514 */*) $(MKDIR_P) `echo "$$dist_files" | \
515 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
518 for file in $$dist_files; do \
519 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
520 if test -d $$d/$$file; then \
521 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
522 if test -d "$(distdir)/$$file"; then \
523 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
525 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
526 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
527 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
529 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
531 test -f "$(distdir)/$$file" \
532 || cp -p $$d/$$file "$(distdir)/$$file" \
536 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
537 if test "$$subdir" = .; then :; else \
538 test -d "$(distdir)/$$subdir" \
539 || $(MKDIR_P) "$(distdir)/$$subdir" \
543 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
544 if test "$$subdir" = .; then :; else \
545 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
547 new_distdir=$$reldir; \
548 dir1=$$subdir; dir2="$(top_distdir)"; \
550 new_top_distdir=$$reldir; \
551 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
552 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
553 ($(am__cd) $$subdir && \
554 $(MAKE) $(AM_MAKEFLAGS) \
555 top_distdir="$$new_top_distdir" \
556 distdir="$$new_distdir" \
557 am__remove_distdir=: \
558 am__skip_length_check=: \
559 am__skip_mode_fix=: \
565 check: check-recursive
567 installdirs: installdirs-recursive
569 install: install-recursive
570 install-exec: install-exec-recursive
571 install-data: install-data-recursive
572 uninstall: uninstall-recursive
575 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
577 installcheck: installcheck-recursive
579 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
580 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
581 `test -z '$(STRIP)' || \
582 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
588 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
589 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
591 maintainer-clean-generic:
592 @echo "This command is intended for maintainers to use"
593 @echo "it deletes files that may require special tools to rebuild."
594 clean: clean-recursive
596 clean-am: clean-generic clean-libtool mostlyclean-am
598 distclean: distclean-recursive
600 distclean-am: clean-am distclean-generic distclean-tags
616 install-dvi: install-dvi-recursive
622 install-html: install-html-recursive
626 install-info: install-info-recursive
632 install-pdf: install-pdf-recursive
636 install-ps: install-ps-recursive
642 maintainer-clean: maintainer-clean-recursive
644 maintainer-clean-am: distclean-am maintainer-clean-generic
646 mostlyclean: mostlyclean-recursive
648 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
660 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
661 install-am install-strip tags-recursive
663 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
664 all all-am check check-am clean clean-generic clean-libtool \
665 ctags ctags-recursive distclean distclean-generic \
666 distclean-libtool distclean-tags distdir dvi dvi-am html \
667 html-am info info-am install install-am install-data \
668 install-data-am install-dvi install-dvi-am install-exec \
669 install-exec-am install-html install-html-am install-info \
670 install-info-am install-man install-pdf install-pdf-am \
671 install-ps install-ps-am install-strip installcheck \
672 installcheck-am installdirs installdirs-am maintainer-clean \
673 maintainer-clean-generic mostlyclean mostlyclean-generic \
674 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
675 uninstall uninstall-am
678 # Tell versions [3.59,3.63) of GNU make to not export all variables.
679 # Otherwise a system limit (for SysV at least) may be exceeded.