1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 pkgdatadir = $(datadir)/@PACKAGE@
19 pkgincludedir = $(includedir)/@PACKAGE@
20 pkglibdir = $(libdir)/@PACKAGE@
21 pkglibexecdir = $(libexecdir)/@PACKAGE@
22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23 install_sh_DATA = $(install_sh) -c -m 644
24 install_sh_PROGRAM = $(install_sh) -c
25 install_sh_SCRIPT = $(install_sh) -c
26 INSTALL_HEADER = $(INSTALL_DATA)
27 transform = $(program_transform_name)
34 build_triplet = @build@
36 target_triplet = @target@
38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
40 am__aclocal_m4_deps = \
41 $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
42 $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
43 $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
44 $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
45 $(top_srcdir)/config/kernel-bio-failfast.m4 \
46 $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
47 $(top_srcdir)/config/kernel-blk-end-request.m4 \
48 $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
49 $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
50 $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
51 $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
52 $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
53 $(top_srcdir)/config/kernel-fmode-t.m4 \
54 $(top_srcdir)/config/kernel-fsync.m4 \
55 $(top_srcdir)/config/kernel-get-disk-ro.m4 \
56 $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
57 $(top_srcdir)/config/kernel-kobj-name-len.m4 \
58 $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
59 $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
60 $(top_srcdir)/config/kernel-rq-is_sync.m4 \
61 $(top_srcdir)/config/kernel-xattr-handler.m4 \
62 $(top_srcdir)/config/kernel.m4 \
63 $(top_srcdir)/config/user-arch.m4 \
64 $(top_srcdir)/config/user-frame-larger-than.m4 \
65 $(top_srcdir)/config/user-ioctl.m4 \
66 $(top_srcdir)/config/user-libblkid.m4 \
67 $(top_srcdir)/config/user-libuuid.m4 \
68 $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
69 $(top_srcdir)/config/user-selinux.m4 \
70 $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
71 $(top_srcdir)/config/zfs-build.m4 \
72 $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
73 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
75 mkinstalldirs = $(install_sh) -d
76 CONFIG_HEADER = $(top_builddir)/zfs_config.h
78 CONFIG_CLEAN_VPATH_FILES =
79 AM_V_GEN = $(am__v_GEN_$(V))
80 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
81 am__v_GEN_0 = @echo " GEN " $@;
82 AM_V_at = $(am__v_at_$(V))
83 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
87 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
88 html-recursive info-recursive install-data-recursive \
89 install-dvi-recursive install-exec-recursive \
90 install-html-recursive install-info-recursive \
91 install-pdf-recursive install-ps-recursive install-recursive \
92 installcheck-recursive installdirs-recursive pdf-recursive \
93 ps-recursive uninstall-recursive
94 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
95 distclean-recursive maintainer-clean-recursive
96 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
97 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
101 DIST_SUBDIRS = $(SUBDIRS)
102 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
105 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
106 sed_rest='s,^[^/]*/*,,'; \
107 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
108 sed_butlast='s,/*[^/]*$$,,'; \
109 while test -n "$$dir1"; do \
110 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
111 if test "$$first" != "."; then \
112 if test "$$first" = ".."; then \
113 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
114 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
116 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
117 if test "$$first2" = "$$first"; then \
118 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
122 dir0="$$dir0"/"$$first"; \
125 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
130 ALIEN_VERSION = @ALIEN_VERSION@
132 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
134 AUTOCONF = @AUTOCONF@
135 AUTOHEADER = @AUTOHEADER@
136 AUTOMAKE = @AUTOMAKE@
140 CCASDEPMODE = @CCASDEPMODE@
141 CCASFLAGS = @CCASFLAGS@
142 CCDEPMODE = @CCDEPMODE@
145 CPPFLAGS = @CPPFLAGS@
146 CYGPATH_W = @CYGPATH_W@
147 DEBUG_CFLAGS = @DEBUG_CFLAGS@
148 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
149 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
153 DPKGBUILD = @DPKGBUILD@
154 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
155 DPKG_VERSION = @DPKG_VERSION@
156 DSYMUTIL = @DSYMUTIL@
164 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
166 HAVE_ALIEN = @HAVE_ALIEN@
167 HAVE_DPKG = @HAVE_DPKG@
168 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
169 HAVE_RPM = @HAVE_RPM@
170 HAVE_RPMBUILD = @HAVE_RPMBUILD@
172 INSTALL_DATA = @INSTALL_DATA@
173 INSTALL_PROGRAM = @INSTALL_PROGRAM@
174 INSTALL_SCRIPT = @INSTALL_SCRIPT@
175 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
176 KERNELCPPFLAGS = @KERNELCPPFLAGS@
177 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
180 LIBBLKID = @LIBBLKID@
183 LIBSELINUX = @LIBSELINUX@
187 LINUX_OBJ = @LINUX_OBJ@
188 LINUX_SYMBOLS = @LINUX_SYMBOLS@
189 LINUX_VERSION = @LINUX_VERSION@
192 LTLIBOBJS = @LTLIBOBJS@
194 MAKEINFO = @MAKEINFO@
203 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
204 PACKAGE_NAME = @PACKAGE_NAME@
205 PACKAGE_STRING = @PACKAGE_STRING@
206 PACKAGE_TARNAME = @PACKAGE_TARNAME@
207 PACKAGE_VERSION = @PACKAGE_VERSION@
208 PATH_SEPARATOR = @PATH_SEPARATOR@
211 RPMBUILD = @RPMBUILD@
212 RPMBUILD_VERSION = @RPMBUILD_VERSION@
213 RPM_VERSION = @RPM_VERSION@
215 SET_MAKE = @SET_MAKE@
219 SPL_SYMBOLS = @SPL_SYMBOLS@
220 SPL_VERSION = @SPL_VERSION@
222 TARGET_ASM_DIR = @TARGET_ASM_DIR@
225 ZFS_CONFIG = @ZFS_CONFIG@
226 ZFS_META_ALIAS = @ZFS_META_ALIAS@
227 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
228 ZFS_META_DATA = @ZFS_META_DATA@
229 ZFS_META_LICENSE = @ZFS_META_LICENSE@
230 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
231 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
232 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
233 ZFS_META_NAME = @ZFS_META_NAME@
234 ZFS_META_RELEASE = @ZFS_META_RELEASE@
235 ZFS_META_VERSION = @ZFS_META_VERSION@
237 abs_builddir = @abs_builddir@
238 abs_srcdir = @abs_srcdir@
239 abs_top_builddir = @abs_top_builddir@
240 abs_top_srcdir = @abs_top_srcdir@
241 ac_ct_CC = @ac_ct_CC@
242 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
243 am__include = @am__include@
244 am__leading_dot = @am__leading_dot@
245 am__quote = @am__quote@
247 am__untar = @am__untar@
250 build_alias = @build_alias@
251 build_cpu = @build_cpu@
252 build_os = @build_os@
253 build_vendor = @build_vendor@
254 builddir = @builddir@
256 datarootdir = @datarootdir@
259 exec_prefix = @exec_prefix@
261 host_alias = @host_alias@
262 host_cpu = @host_cpu@
264 host_vendor = @host_vendor@
266 includedir = @includedir@
268 install_sh = @install_sh@
270 libexecdir = @libexecdir@
271 localedir = @localedir@
272 localstatedir = @localstatedir@
276 oldincludedir = @oldincludedir@
279 program_transform_name = @program_transform_name@
282 sharedstatedir = @sharedstatedir@
284 sysconfdir = @sysconfdir@
286 target_alias = @target_alias@
287 target_cpu = @target_cpu@
288 target_os = @target_os@
289 target_vendor = @target_vendor@
290 top_build_prefix = @top_build_prefix@
291 top_builddir = @top_builddir@
292 top_srcdir = @top_srcdir@
297 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
299 case '$(am__configure_deps)' in \
301 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
302 && { if test -f $@; then exit 0; else break; fi; }; \
306 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu man/Makefile'; \
307 $(am__cd) $(top_srcdir) && \
308 $(AUTOMAKE) --gnu man/Makefile
310 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
313 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
315 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
316 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
319 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
320 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
322 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
323 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
324 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
325 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
326 $(am__aclocal_m4_deps):
334 # This directory's subdirectories are mostly independent; you can cd
335 # into them and run `make' without going through this Makefile.
336 # To change the values of `make' variables: instead of editing Makefiles,
337 # (1) if the variable is set in `config.status', edit `config.status'
338 # (which will cause the Makefiles to be regenerated when you run `make');
339 # (2) otherwise, pass the desired values on the `make' command line.
340 $(RECURSIVE_TARGETS):
341 @fail= failcom='exit 1'; \
342 for f in x $$MAKEFLAGS; do \
345 *k*) failcom='fail=yes';; \
349 target=`echo $@ | sed s/-recursive//`; \
350 list='$(SUBDIRS)'; for subdir in $$list; do \
351 echo "Making $$target in $$subdir"; \
352 if test "$$subdir" = "."; then \
354 local_target="$$target-am"; \
356 local_target="$$target"; \
358 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
361 if test "$$dot_seen" = "no"; then \
362 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
365 $(RECURSIVE_CLEAN_TARGETS):
366 @fail= failcom='exit 1'; \
367 for f in x $$MAKEFLAGS; do \
370 *k*) failcom='fail=yes';; \
375 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
376 *) list='$(SUBDIRS)' ;; \
378 rev=''; for subdir in $$list; do \
379 if test "$$subdir" = "."; then :; else \
380 rev="$$subdir $$rev"; \
384 target=`echo $@ | sed s/-recursive//`; \
385 for subdir in $$rev; do \
386 echo "Making $$target in $$subdir"; \
387 if test "$$subdir" = "."; then \
388 local_target="$$target-am"; \
390 local_target="$$target"; \
392 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
394 done && test -z "$$fail"
396 list='$(SUBDIRS)'; for subdir in $$list; do \
397 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
400 list='$(SUBDIRS)'; for subdir in $$list; do \
401 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
404 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
405 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
406 unique=`for i in $$list; do \
407 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
409 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
410 END { if (nonempty) { for (i in files) print i; }; }'`; \
414 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
415 $(TAGS_FILES) $(LISP)
418 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
419 include_option=--etags-include; \
422 include_option=--include; \
425 list='$(SUBDIRS)'; for subdir in $$list; do \
426 if test "$$subdir" = .; then :; else \
427 test ! -f $$subdir/TAGS || \
428 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
431 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
432 unique=`for i in $$list; do \
433 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
435 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
436 END { if (nonempty) { for (i in files) print i; }; }'`; \
438 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
439 test -n "$$unique" || unique=$$empty_fix; \
440 if test $$# -gt 0; then \
441 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
444 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
449 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
450 $(TAGS_FILES) $(LISP)
451 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
452 unique=`for i in $$list; do \
453 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
455 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
456 END { if (nonempty) { for (i in files) print i; }; }'`; \
457 test -z "$(CTAGS_ARGS)$$unique" \
458 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
462 here=`$(am__cd) $(top_builddir) && pwd` \
463 && $(am__cd) $(top_srcdir) \
464 && gtags -i $(GTAGS_ARGS) "$$here"
467 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
469 distdir: $(DISTFILES)
470 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
471 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
472 list='$(DISTFILES)'; \
473 dist_files=`for file in $$list; do echo $$file; done | \
474 sed -e "s|^$$srcdirstrip/||;t" \
475 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
476 case $$dist_files in \
477 */*) $(MKDIR_P) `echo "$$dist_files" | \
478 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
481 for file in $$dist_files; do \
482 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
483 if test -d $$d/$$file; then \
484 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
485 if test -d "$(distdir)/$$file"; then \
486 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
488 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
489 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
490 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
492 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
494 test -f "$(distdir)/$$file" \
495 || cp -p $$d/$$file "$(distdir)/$$file" \
499 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
500 if test "$$subdir" = .; then :; else \
501 test -d "$(distdir)/$$subdir" \
502 || $(MKDIR_P) "$(distdir)/$$subdir" \
506 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
507 if test "$$subdir" = .; then :; else \
508 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
510 new_distdir=$$reldir; \
511 dir1=$$subdir; dir2="$(top_distdir)"; \
513 new_top_distdir=$$reldir; \
514 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
515 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
516 ($(am__cd) $$subdir && \
517 $(MAKE) $(AM_MAKEFLAGS) \
518 top_distdir="$$new_top_distdir" \
519 distdir="$$new_distdir" \
520 am__remove_distdir=: \
521 am__skip_length_check=: \
522 am__skip_mode_fix=: \
528 check: check-recursive
530 installdirs: installdirs-recursive
532 install: install-recursive
533 install-exec: install-exec-recursive
534 install-data: install-data-recursive
535 uninstall: uninstall-recursive
538 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
540 installcheck: installcheck-recursive
542 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
543 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
544 `test -z '$(STRIP)' || \
545 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
551 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
552 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
554 maintainer-clean-generic:
555 @echo "This command is intended for maintainers to use"
556 @echo "it deletes files that may require special tools to rebuild."
557 clean: clean-recursive
559 clean-am: clean-generic clean-libtool mostlyclean-am
561 distclean: distclean-recursive
563 distclean-am: clean-am distclean-generic distclean-tags
579 install-dvi: install-dvi-recursive
585 install-html: install-html-recursive
589 install-info: install-info-recursive
595 install-pdf: install-pdf-recursive
599 install-ps: install-ps-recursive
605 maintainer-clean: maintainer-clean-recursive
607 maintainer-clean-am: distclean-am maintainer-clean-generic
609 mostlyclean: mostlyclean-recursive
611 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
623 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
624 install-am install-strip tags-recursive
626 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
627 all all-am check check-am clean clean-generic clean-libtool \
628 ctags ctags-recursive distclean distclean-generic \
629 distclean-libtool distclean-tags distdir dvi dvi-am html \
630 html-am info info-am install install-am install-data \
631 install-data-am install-dvi install-dvi-am install-exec \
632 install-exec-am install-html install-html-am install-info \
633 install-info-am install-man install-pdf install-pdf-am \
634 install-ps install-ps-am install-strip installcheck \
635 installcheck-am installdirs installdirs-am maintainer-clean \
636 maintainer-clean-generic mostlyclean mostlyclean-generic \
637 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
638 uninstall uninstall-am
641 # Tell versions [3.59,3.63) of GNU make to not export all variables.
642 # Otherwise a system limit (for SysV at least) may be exceeded.