1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 pkgdatadir = $(datadir)/@PACKAGE@
19 pkgincludedir = $(includedir)/@PACKAGE@
20 pkglibdir = $(libdir)/@PACKAGE@
21 pkglibexecdir = $(libexecdir)/@PACKAGE@
22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23 install_sh_DATA = $(install_sh) -c -m 644
24 install_sh_PROGRAM = $(install_sh) -c
25 install_sh_SCRIPT = $(install_sh) -c
26 INSTALL_HEADER = $(INSTALL_DATA)
27 transform = $(program_transform_name)
34 build_triplet = @build@
36 target_triplet = @target@
38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
40 am__aclocal_m4_deps = \
41 $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
42 $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
43 $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
44 $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
45 $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
46 $(top_srcdir)/config/kernel-blk-end-request.m4 \
47 $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
48 $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
49 $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
50 $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
51 $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
52 $(top_srcdir)/config/kernel-fmode-t.m4 \
53 $(top_srcdir)/config/kernel-get-disk-ro.m4 \
54 $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
55 $(top_srcdir)/config/kernel-kobj-name-len.m4 \
56 $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
57 $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
58 $(top_srcdir)/config/kernel-rq-is_sync.m4 \
59 $(top_srcdir)/config/kernel.m4 \
60 $(top_srcdir)/config/user-arch.m4 \
61 $(top_srcdir)/config/user-frame-larger-than.m4 \
62 $(top_srcdir)/config/user-ioctl.m4 \
63 $(top_srcdir)/config/user-libblkid.m4 \
64 $(top_srcdir)/config/user-libshare.m4 \
65 $(top_srcdir)/config/user-libuuid.m4 \
66 $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
67 $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
68 $(top_srcdir)/config/zfs-build.m4 \
69 $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
70 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
72 mkinstalldirs = $(install_sh) -d
73 CONFIG_HEADER = $(top_builddir)/zfs_config.h
75 CONFIG_CLEAN_VPATH_FILES =
76 AM_V_GEN = $(am__v_GEN_$(V))
77 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
78 am__v_GEN_0 = @echo " GEN " $@;
79 AM_V_at = $(am__v_at_$(V))
80 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
84 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
85 html-recursive info-recursive install-data-recursive \
86 install-dvi-recursive install-exec-recursive \
87 install-html-recursive install-info-recursive \
88 install-pdf-recursive install-ps-recursive install-recursive \
89 installcheck-recursive installdirs-recursive pdf-recursive \
90 ps-recursive uninstall-recursive
91 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
92 distclean-recursive maintainer-clean-recursive
93 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
94 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
98 DIST_SUBDIRS = $(SUBDIRS)
99 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
102 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
103 sed_rest='s,^[^/]*/*,,'; \
104 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
105 sed_butlast='s,/*[^/]*$$,,'; \
106 while test -n "$$dir1"; do \
107 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
108 if test "$$first" != "."; then \
109 if test "$$first" = ".."; then \
110 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
111 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
113 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
114 if test "$$first2" = "$$first"; then \
115 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
119 dir0="$$dir0"/"$$first"; \
122 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
127 ALIEN_VERSION = @ALIEN_VERSION@
129 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
131 AUTOCONF = @AUTOCONF@
132 AUTOHEADER = @AUTOHEADER@
133 AUTOMAKE = @AUTOMAKE@
137 CCASDEPMODE = @CCASDEPMODE@
138 CCASFLAGS = @CCASFLAGS@
139 CCDEPMODE = @CCDEPMODE@
142 CPPFLAGS = @CPPFLAGS@
143 CYGPATH_W = @CYGPATH_W@
144 DEBUG_CFLAGS = @DEBUG_CFLAGS@
145 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
146 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
150 DPKGBUILD = @DPKGBUILD@
151 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
152 DPKG_VERSION = @DPKG_VERSION@
153 DSYMUTIL = @DSYMUTIL@
161 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
163 HAVE_ALIEN = @HAVE_ALIEN@
164 HAVE_DPKG = @HAVE_DPKG@
165 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
166 HAVE_RPM = @HAVE_RPM@
167 HAVE_RPMBUILD = @HAVE_RPMBUILD@
169 INSTALL_DATA = @INSTALL_DATA@
170 INSTALL_PROGRAM = @INSTALL_PROGRAM@
171 INSTALL_SCRIPT = @INSTALL_SCRIPT@
172 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
173 KERNELCPPFLAGS = @KERNELCPPFLAGS@
174 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
177 LIBBLKID = @LIBBLKID@
183 LINUX_OBJ = @LINUX_OBJ@
184 LINUX_SYMBOLS = @LINUX_SYMBOLS@
185 LINUX_VERSION = @LINUX_VERSION@
188 LTLIBOBJS = @LTLIBOBJS@
190 MAKEINFO = @MAKEINFO@
199 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
200 PACKAGE_NAME = @PACKAGE_NAME@
201 PACKAGE_STRING = @PACKAGE_STRING@
202 PACKAGE_TARNAME = @PACKAGE_TARNAME@
203 PACKAGE_VERSION = @PACKAGE_VERSION@
204 PATH_SEPARATOR = @PATH_SEPARATOR@
207 RPMBUILD = @RPMBUILD@
208 RPMBUILD_VERSION = @RPMBUILD_VERSION@
209 RPM_VERSION = @RPM_VERSION@
211 SET_MAKE = @SET_MAKE@
215 SPL_SYMBOLS = @SPL_SYMBOLS@
216 SPL_VERSION = @SPL_VERSION@
218 TARGET_ASM_DIR = @TARGET_ASM_DIR@
221 ZFS_CONFIG = @ZFS_CONFIG@
222 ZFS_META_ALIAS = @ZFS_META_ALIAS@
223 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
224 ZFS_META_DATA = @ZFS_META_DATA@
225 ZFS_META_LICENSE = @ZFS_META_LICENSE@
226 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
227 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
228 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
229 ZFS_META_NAME = @ZFS_META_NAME@
230 ZFS_META_RELEASE = @ZFS_META_RELEASE@
231 ZFS_META_VERSION = @ZFS_META_VERSION@
233 abs_builddir = @abs_builddir@
234 abs_srcdir = @abs_srcdir@
235 abs_top_builddir = @abs_top_builddir@
236 abs_top_srcdir = @abs_top_srcdir@
237 ac_ct_CC = @ac_ct_CC@
238 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
239 am__include = @am__include@
240 am__leading_dot = @am__leading_dot@
241 am__quote = @am__quote@
243 am__untar = @am__untar@
246 build_alias = @build_alias@
247 build_cpu = @build_cpu@
248 build_os = @build_os@
249 build_vendor = @build_vendor@
250 builddir = @builddir@
252 datarootdir = @datarootdir@
255 exec_prefix = @exec_prefix@
257 host_alias = @host_alias@
258 host_cpu = @host_cpu@
260 host_vendor = @host_vendor@
262 includedir = @includedir@
264 install_sh = @install_sh@
266 libexecdir = @libexecdir@
267 localedir = @localedir@
268 localstatedir = @localstatedir@
272 oldincludedir = @oldincludedir@
275 program_transform_name = @program_transform_name@
278 sharedstatedir = @sharedstatedir@
280 sysconfdir = @sysconfdir@
282 target_alias = @target_alias@
283 target_cpu = @target_cpu@
284 target_os = @target_os@
285 target_vendor = @target_vendor@
286 top_build_prefix = @top_build_prefix@
287 top_builddir = @top_builddir@
288 top_srcdir = @top_srcdir@
289 SUBDIRS = libspl libavl libefi libnvpair libunicode libuutil libzfs libzpool
293 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
295 case '$(am__configure_deps)' in \
297 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
298 && { if test -f $@; then exit 0; else break; fi; }; \
302 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \
303 $(am__cd) $(top_srcdir) && \
304 $(AUTOMAKE) --gnu lib/Makefile
306 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
309 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
311 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
312 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
315 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
316 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
318 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
319 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
320 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
321 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
322 $(am__aclocal_m4_deps):
330 # This directory's subdirectories are mostly independent; you can cd
331 # into them and run `make' without going through this Makefile.
332 # To change the values of `make' variables: instead of editing Makefiles,
333 # (1) if the variable is set in `config.status', edit `config.status'
334 # (which will cause the Makefiles to be regenerated when you run `make');
335 # (2) otherwise, pass the desired values on the `make' command line.
336 $(RECURSIVE_TARGETS):
337 @fail= failcom='exit 1'; \
338 for f in x $$MAKEFLAGS; do \
341 *k*) failcom='fail=yes';; \
345 target=`echo $@ | sed s/-recursive//`; \
346 list='$(SUBDIRS)'; for subdir in $$list; do \
347 echo "Making $$target in $$subdir"; \
348 if test "$$subdir" = "."; then \
350 local_target="$$target-am"; \
352 local_target="$$target"; \
354 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
357 if test "$$dot_seen" = "no"; then \
358 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
361 $(RECURSIVE_CLEAN_TARGETS):
362 @fail= failcom='exit 1'; \
363 for f in x $$MAKEFLAGS; do \
366 *k*) failcom='fail=yes';; \
371 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
372 *) list='$(SUBDIRS)' ;; \
374 rev=''; for subdir in $$list; do \
375 if test "$$subdir" = "."; then :; else \
376 rev="$$subdir $$rev"; \
380 target=`echo $@ | sed s/-recursive//`; \
381 for subdir in $$rev; do \
382 echo "Making $$target in $$subdir"; \
383 if test "$$subdir" = "."; then \
384 local_target="$$target-am"; \
386 local_target="$$target"; \
388 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
390 done && test -z "$$fail"
392 list='$(SUBDIRS)'; for subdir in $$list; do \
393 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
396 list='$(SUBDIRS)'; for subdir in $$list; do \
397 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
400 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
401 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
402 unique=`for i in $$list; do \
403 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
405 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
406 END { if (nonempty) { for (i in files) print i; }; }'`; \
410 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
411 $(TAGS_FILES) $(LISP)
414 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
415 include_option=--etags-include; \
418 include_option=--include; \
421 list='$(SUBDIRS)'; for subdir in $$list; do \
422 if test "$$subdir" = .; then :; else \
423 test ! -f $$subdir/TAGS || \
424 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
427 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
428 unique=`for i in $$list; do \
429 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
431 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
432 END { if (nonempty) { for (i in files) print i; }; }'`; \
434 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
435 test -n "$$unique" || unique=$$empty_fix; \
436 if test $$# -gt 0; then \
437 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
440 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
445 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
446 $(TAGS_FILES) $(LISP)
447 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
448 unique=`for i in $$list; do \
449 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
451 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
452 END { if (nonempty) { for (i in files) print i; }; }'`; \
453 test -z "$(CTAGS_ARGS)$$unique" \
454 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
458 here=`$(am__cd) $(top_builddir) && pwd` \
459 && $(am__cd) $(top_srcdir) \
460 && gtags -i $(GTAGS_ARGS) "$$here"
463 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
465 distdir: $(DISTFILES)
466 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
467 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
468 list='$(DISTFILES)'; \
469 dist_files=`for file in $$list; do echo $$file; done | \
470 sed -e "s|^$$srcdirstrip/||;t" \
471 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
472 case $$dist_files in \
473 */*) $(MKDIR_P) `echo "$$dist_files" | \
474 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
477 for file in $$dist_files; do \
478 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
479 if test -d $$d/$$file; then \
480 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
481 if test -d "$(distdir)/$$file"; then \
482 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
484 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
485 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
486 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
488 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
490 test -f "$(distdir)/$$file" \
491 || cp -p $$d/$$file "$(distdir)/$$file" \
495 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
496 if test "$$subdir" = .; then :; else \
497 test -d "$(distdir)/$$subdir" \
498 || $(MKDIR_P) "$(distdir)/$$subdir" \
502 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
503 if test "$$subdir" = .; then :; else \
504 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
506 new_distdir=$$reldir; \
507 dir1=$$subdir; dir2="$(top_distdir)"; \
509 new_top_distdir=$$reldir; \
510 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
511 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
512 ($(am__cd) $$subdir && \
513 $(MAKE) $(AM_MAKEFLAGS) \
514 top_distdir="$$new_top_distdir" \
515 distdir="$$new_distdir" \
516 am__remove_distdir=: \
517 am__skip_length_check=: \
518 am__skip_mode_fix=: \
524 check: check-recursive
526 installdirs: installdirs-recursive
528 install: install-recursive
529 install-exec: install-exec-recursive
530 install-data: install-data-recursive
531 uninstall: uninstall-recursive
534 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
536 installcheck: installcheck-recursive
538 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
539 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
540 `test -z '$(STRIP)' || \
541 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
547 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
548 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
550 maintainer-clean-generic:
551 @echo "This command is intended for maintainers to use"
552 @echo "it deletes files that may require special tools to rebuild."
553 clean: clean-recursive
555 clean-am: clean-generic clean-libtool mostlyclean-am
557 distclean: distclean-recursive
559 distclean-am: clean-am distclean-generic distclean-tags
575 install-dvi: install-dvi-recursive
581 install-html: install-html-recursive
585 install-info: install-info-recursive
591 install-pdf: install-pdf-recursive
595 install-ps: install-ps-recursive
601 maintainer-clean: maintainer-clean-recursive
603 maintainer-clean-am: distclean-am maintainer-clean-generic
605 mostlyclean: mostlyclean-recursive
607 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
619 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
620 install-am install-strip tags-recursive
622 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
623 all all-am check check-am clean clean-generic clean-libtool \
624 ctags ctags-recursive distclean distclean-generic \
625 distclean-libtool distclean-tags distdir dvi dvi-am html \
626 html-am info info-am install install-am install-data \
627 install-data-am install-dvi install-dvi-am install-exec \
628 install-exec-am install-html install-html-am install-info \
629 install-info-am install-man install-pdf install-pdf-am \
630 install-ps install-ps-am install-strip installcheck \
631 installcheck-am installdirs installdirs-am maintainer-clean \
632 maintainer-clean-generic mostlyclean mostlyclean-generic \
633 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
634 uninstall uninstall-am
637 # Tell versions [3.59,3.63) of GNU make to not export all variables.
638 # Otherwise a system limit (for SysV at least) may be exceeded.