1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
7 # This Makefile.in is free software; the Free Software Foundation
8 # gives unlimited permission to copy and/or distribute it,
9 # with or without modifications, as long as this notice is preserved.
11 # This program is distributed in the hope that it will be useful,
12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
18 pkgdatadir = $(datadir)/@PACKAGE@
19 pkgincludedir = $(includedir)/@PACKAGE@
20 pkglibdir = $(libdir)/@PACKAGE@
21 pkglibexecdir = $(libexecdir)/@PACKAGE@
22 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
23 install_sh_DATA = $(install_sh) -c -m 644
24 install_sh_PROGRAM = $(install_sh) -c
25 install_sh_SCRIPT = $(install_sh) -c
26 INSTALL_HEADER = $(INSTALL_DATA)
27 transform = $(program_transform_name)
34 build_triplet = @build@
36 target_triplet = @target@
38 DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
39 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
40 am__aclocal_m4_deps = \
41 $(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
42 $(top_srcdir)/config/kernel-bdev-logical-size.m4 \
43 $(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
44 $(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
45 $(top_srcdir)/config/kernel-bio-failfast.m4 \
46 $(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
47 $(top_srcdir)/config/kernel-blk-end-request.m4 \
48 $(top_srcdir)/config/kernel-blk-fetch-request.m4 \
49 $(top_srcdir)/config/kernel-blk-requeue-request.m4 \
50 $(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
51 $(top_srcdir)/config/kernel-blk-rq-pos.m4 \
52 $(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
53 $(top_srcdir)/config/kernel-fmode-t.m4 \
54 $(top_srcdir)/config/kernel-get-disk-ro.m4 \
55 $(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
56 $(top_srcdir)/config/kernel-kobj-name-len.m4 \
57 $(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
58 $(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
59 $(top_srcdir)/config/kernel-rq-is_sync.m4 \
60 $(top_srcdir)/config/kernel.m4 \
61 $(top_srcdir)/config/user-arch.m4 \
62 $(top_srcdir)/config/user-frame-larger-than.m4 \
63 $(top_srcdir)/config/user-ioctl.m4 \
64 $(top_srcdir)/config/user-libblkid.m4 \
65 $(top_srcdir)/config/user-libshare.m4 \
66 $(top_srcdir)/config/user-libuuid.m4 \
67 $(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
68 $(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
69 $(top_srcdir)/config/zfs-build.m4 \
70 $(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
71 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
73 mkinstalldirs = $(install_sh) -d
74 CONFIG_HEADER = $(top_builddir)/zfs_config.h
76 CONFIG_CLEAN_VPATH_FILES =
77 AM_V_GEN = $(am__v_GEN_$(V))
78 am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
79 am__v_GEN_0 = @echo " GEN " $@;
80 AM_V_at = $(am__v_at_$(V))
81 am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
85 RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
86 html-recursive info-recursive install-data-recursive \
87 install-dvi-recursive install-exec-recursive \
88 install-html-recursive install-info-recursive \
89 install-pdf-recursive install-ps-recursive install-recursive \
90 installcheck-recursive installdirs-recursive pdf-recursive \
91 ps-recursive uninstall-recursive
92 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
93 distclean-recursive maintainer-clean-recursive
94 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
95 $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
99 DIST_SUBDIRS = $(SUBDIRS)
100 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
103 sed_first='s,^\([^/]*\)/.*$$,\1,'; \
104 sed_rest='s,^[^/]*/*,,'; \
105 sed_last='s,^.*/\([^/]*\)$$,\1,'; \
106 sed_butlast='s,/*[^/]*$$,,'; \
107 while test -n "$$dir1"; do \
108 first=`echo "$$dir1" | sed -e "$$sed_first"`; \
109 if test "$$first" != "."; then \
110 if test "$$first" = ".."; then \
111 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
112 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
114 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
115 if test "$$first2" = "$$first"; then \
116 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
120 dir0="$$dir0"/"$$first"; \
123 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
128 ALIEN_VERSION = @ALIEN_VERSION@
130 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
132 AUTOCONF = @AUTOCONF@
133 AUTOHEADER = @AUTOHEADER@
134 AUTOMAKE = @AUTOMAKE@
138 CCASDEPMODE = @CCASDEPMODE@
139 CCASFLAGS = @CCASFLAGS@
140 CCDEPMODE = @CCDEPMODE@
143 CPPFLAGS = @CPPFLAGS@
144 CYGPATH_W = @CYGPATH_W@
145 DEBUG_CFLAGS = @DEBUG_CFLAGS@
146 DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
147 DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
151 DPKGBUILD = @DPKGBUILD@
152 DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
153 DPKG_VERSION = @DPKG_VERSION@
154 DSYMUTIL = @DSYMUTIL@
162 FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
164 HAVE_ALIEN = @HAVE_ALIEN@
165 HAVE_DPKG = @HAVE_DPKG@
166 HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
167 HAVE_RPM = @HAVE_RPM@
168 HAVE_RPMBUILD = @HAVE_RPMBUILD@
170 INSTALL_DATA = @INSTALL_DATA@
171 INSTALL_PROGRAM = @INSTALL_PROGRAM@
172 INSTALL_SCRIPT = @INSTALL_SCRIPT@
173 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
174 KERNELCPPFLAGS = @KERNELCPPFLAGS@
175 KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
178 LIBBLKID = @LIBBLKID@
184 LINUX_OBJ = @LINUX_OBJ@
185 LINUX_SYMBOLS = @LINUX_SYMBOLS@
186 LINUX_VERSION = @LINUX_VERSION@
189 LTLIBOBJS = @LTLIBOBJS@
191 MAKEINFO = @MAKEINFO@
200 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
201 PACKAGE_NAME = @PACKAGE_NAME@
202 PACKAGE_STRING = @PACKAGE_STRING@
203 PACKAGE_TARNAME = @PACKAGE_TARNAME@
204 PACKAGE_VERSION = @PACKAGE_VERSION@
205 PATH_SEPARATOR = @PATH_SEPARATOR@
208 RPMBUILD = @RPMBUILD@
209 RPMBUILD_VERSION = @RPMBUILD_VERSION@
210 RPM_VERSION = @RPM_VERSION@
212 SET_MAKE = @SET_MAKE@
216 SPL_SYMBOLS = @SPL_SYMBOLS@
217 SPL_VERSION = @SPL_VERSION@
219 TARGET_ASM_DIR = @TARGET_ASM_DIR@
222 ZFS_CONFIG = @ZFS_CONFIG@
223 ZFS_META_ALIAS = @ZFS_META_ALIAS@
224 ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
225 ZFS_META_DATA = @ZFS_META_DATA@
226 ZFS_META_LICENSE = @ZFS_META_LICENSE@
227 ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
228 ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
229 ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
230 ZFS_META_NAME = @ZFS_META_NAME@
231 ZFS_META_RELEASE = @ZFS_META_RELEASE@
232 ZFS_META_VERSION = @ZFS_META_VERSION@
234 abs_builddir = @abs_builddir@
235 abs_srcdir = @abs_srcdir@
236 abs_top_builddir = @abs_top_builddir@
237 abs_top_srcdir = @abs_top_srcdir@
238 ac_ct_CC = @ac_ct_CC@
239 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
240 am__include = @am__include@
241 am__leading_dot = @am__leading_dot@
242 am__quote = @am__quote@
244 am__untar = @am__untar@
247 build_alias = @build_alias@
248 build_cpu = @build_cpu@
249 build_os = @build_os@
250 build_vendor = @build_vendor@
251 builddir = @builddir@
253 datarootdir = @datarootdir@
256 exec_prefix = @exec_prefix@
258 host_alias = @host_alias@
259 host_cpu = @host_cpu@
261 host_vendor = @host_vendor@
263 includedir = @includedir@
265 install_sh = @install_sh@
267 libexecdir = @libexecdir@
268 localedir = @localedir@
269 localstatedir = @localstatedir@
273 oldincludedir = @oldincludedir@
276 program_transform_name = @program_transform_name@
279 sharedstatedir = @sharedstatedir@
281 sysconfdir = @sysconfdir@
283 target_alias = @target_alias@
284 target_cpu = @target_cpu@
285 target_os = @target_os@
286 target_vendor = @target_vendor@
287 top_build_prefix = @top_build_prefix@
288 top_builddir = @top_builddir@
289 top_srcdir = @top_srcdir@
290 SUBDIRS = libspl libavl libefi libnvpair libunicode libuutil libzfs libzpool
294 $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
296 case '$(am__configure_deps)' in \
298 ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
299 && { if test -f $@; then exit 0; else break; fi; }; \
303 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu lib/Makefile'; \
304 $(am__cd) $(top_srcdir) && \
305 $(AUTOMAKE) --gnu lib/Makefile
307 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
310 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
312 echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
313 cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
316 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
317 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
319 $(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
320 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
321 $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
322 cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
323 $(am__aclocal_m4_deps):
331 # This directory's subdirectories are mostly independent; you can cd
332 # into them and run `make' without going through this Makefile.
333 # To change the values of `make' variables: instead of editing Makefiles,
334 # (1) if the variable is set in `config.status', edit `config.status'
335 # (which will cause the Makefiles to be regenerated when you run `make');
336 # (2) otherwise, pass the desired values on the `make' command line.
337 $(RECURSIVE_TARGETS):
338 @fail= failcom='exit 1'; \
339 for f in x $$MAKEFLAGS; do \
342 *k*) failcom='fail=yes';; \
346 target=`echo $@ | sed s/-recursive//`; \
347 list='$(SUBDIRS)'; for subdir in $$list; do \
348 echo "Making $$target in $$subdir"; \
349 if test "$$subdir" = "."; then \
351 local_target="$$target-am"; \
353 local_target="$$target"; \
355 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
358 if test "$$dot_seen" = "no"; then \
359 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
362 $(RECURSIVE_CLEAN_TARGETS):
363 @fail= failcom='exit 1'; \
364 for f in x $$MAKEFLAGS; do \
367 *k*) failcom='fail=yes';; \
372 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
373 *) list='$(SUBDIRS)' ;; \
375 rev=''; for subdir in $$list; do \
376 if test "$$subdir" = "."; then :; else \
377 rev="$$subdir $$rev"; \
381 target=`echo $@ | sed s/-recursive//`; \
382 for subdir in $$rev; do \
383 echo "Making $$target in $$subdir"; \
384 if test "$$subdir" = "."; then \
385 local_target="$$target-am"; \
387 local_target="$$target"; \
389 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
391 done && test -z "$$fail"
393 list='$(SUBDIRS)'; for subdir in $$list; do \
394 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
397 list='$(SUBDIRS)'; for subdir in $$list; do \
398 test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
401 ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
402 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
403 unique=`for i in $$list; do \
404 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
406 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
407 END { if (nonempty) { for (i in files) print i; }; }'`; \
411 TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
412 $(TAGS_FILES) $(LISP)
415 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
416 include_option=--etags-include; \
419 include_option=--include; \
422 list='$(SUBDIRS)'; for subdir in $$list; do \
423 if test "$$subdir" = .; then :; else \
424 test ! -f $$subdir/TAGS || \
425 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
428 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
429 unique=`for i in $$list; do \
430 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
432 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
433 END { if (nonempty) { for (i in files) print i; }; }'`; \
435 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
436 test -n "$$unique" || unique=$$empty_fix; \
437 if test $$# -gt 0; then \
438 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
441 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
446 CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
447 $(TAGS_FILES) $(LISP)
448 list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
449 unique=`for i in $$list; do \
450 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
452 $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
453 END { if (nonempty) { for (i in files) print i; }; }'`; \
454 test -z "$(CTAGS_ARGS)$$unique" \
455 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
459 here=`$(am__cd) $(top_builddir) && pwd` \
460 && $(am__cd) $(top_srcdir) \
461 && gtags -i $(GTAGS_ARGS) "$$here"
464 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
466 distdir: $(DISTFILES)
467 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
468 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
469 list='$(DISTFILES)'; \
470 dist_files=`for file in $$list; do echo $$file; done | \
471 sed -e "s|^$$srcdirstrip/||;t" \
472 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
473 case $$dist_files in \
474 */*) $(MKDIR_P) `echo "$$dist_files" | \
475 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
478 for file in $$dist_files; do \
479 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
480 if test -d $$d/$$file; then \
481 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
482 if test -d "$(distdir)/$$file"; then \
483 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
485 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
486 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
487 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
489 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
491 test -f "$(distdir)/$$file" \
492 || cp -p $$d/$$file "$(distdir)/$$file" \
496 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
497 if test "$$subdir" = .; then :; else \
498 test -d "$(distdir)/$$subdir" \
499 || $(MKDIR_P) "$(distdir)/$$subdir" \
503 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
504 if test "$$subdir" = .; then :; else \
505 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
507 new_distdir=$$reldir; \
508 dir1=$$subdir; dir2="$(top_distdir)"; \
510 new_top_distdir=$$reldir; \
511 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
512 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
513 ($(am__cd) $$subdir && \
514 $(MAKE) $(AM_MAKEFLAGS) \
515 top_distdir="$$new_top_distdir" \
516 distdir="$$new_distdir" \
517 am__remove_distdir=: \
518 am__skip_length_check=: \
519 am__skip_mode_fix=: \
525 check: check-recursive
527 installdirs: installdirs-recursive
529 install: install-recursive
530 install-exec: install-exec-recursive
531 install-data: install-data-recursive
532 uninstall: uninstall-recursive
535 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
537 installcheck: installcheck-recursive
539 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
540 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
541 `test -z '$(STRIP)' || \
542 echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
548 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
549 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
551 maintainer-clean-generic:
552 @echo "This command is intended for maintainers to use"
553 @echo "it deletes files that may require special tools to rebuild."
554 clean: clean-recursive
556 clean-am: clean-generic clean-libtool mostlyclean-am
558 distclean: distclean-recursive
560 distclean-am: clean-am distclean-generic distclean-tags
576 install-dvi: install-dvi-recursive
582 install-html: install-html-recursive
586 install-info: install-info-recursive
592 install-pdf: install-pdf-recursive
596 install-ps: install-ps-recursive
602 maintainer-clean: maintainer-clean-recursive
604 maintainer-clean-am: distclean-am maintainer-clean-generic
606 mostlyclean: mostlyclean-recursive
608 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
620 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
621 install-am install-strip tags-recursive
623 .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
624 all all-am check check-am clean clean-generic clean-libtool \
625 ctags ctags-recursive distclean distclean-generic \
626 distclean-libtool distclean-tags distdir dvi dvi-am html \
627 html-am info info-am install install-am install-data \
628 install-data-am install-dvi install-dvi-am install-exec \
629 install-exec-am install-html install-html-am install-info \
630 install-info-am install-man install-pdf install-pdf-am \
631 install-ps install-ps-am install-strip installcheck \
632 installcheck-am installdirs installdirs-am maintainer-clean \
633 maintainer-clean-generic mostlyclean mostlyclean-generic \
634 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
635 uninstall uninstall-am
638 # Tell versions [3.59,3.63) of GNU make to not export all variables.
639 # Otherwise a system limit (for SysV at least) may be exceeded.