1 /* Licensed to the Apache Software Foundation (ASF) under one or more
2 * contributor license agreements. See the NOTICE file distributed with
3 * this work for additional information regarding copyright ownership.
4 * The ASF licenses this file to You under the Apache License, Version 2.0
5 * (the "License"); you may not use this file except in compliance with
6 * the License. You may obtain a copy of the License at
8 * http://www.apache.org/licenses/LICENSE-2.0
10 * Unless required by applicable law or agreed to in writing, software
11 * distributed under the License is distributed on an "AS IS" BASIS,
12 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
13 * See the License for the specific language governing permissions and
14 * limitations under the License.
19 * @brief HTTP Daemon routines
21 * @defgroup APACHE Apache
23 * Top level group of which all other groups are a member
26 * @defgroup APACHE_MODS Apache Modules
27 * Top level group for Apache Modules
28 * @defgroup APACHE_OS Operating System Specific
29 * @defgroup APACHE_CORE Apache Core
31 * @defgroup APACHE_CORE_DAEMON HTTP Daemon Routine
35 #ifndef APACHE_HTTPD_H
36 #define APACHE_HTTPD_H
38 /* XXX - We need to push more stuff to other .h files, or even .c files, to
39 * make this file smaller
42 /* Headers in which EVERYONE has an interest... */
43 #include "ap_config.h"
46 #include "ap_release.h"
49 #include "apr_general.h"
50 #include "apr_tables.h"
51 #include "apr_pools.h"
53 #include "apr_network_io.h"
54 #include "apr_buckets.h"
56 #include "apr_thread_proc.h"
66 /* Note: apr_uri.h is also included, see below */
72 /* ----------------------------- config dir ------------------------------ */
74 /** Define this to be the default server home dir. Most things later in this
75 * file with a relative pathname will have this added.
79 /** Set default for Windows file system */
80 #define HTTPD_ROOT "/apache"
81 #elif defined (NETWARE)
82 /** Set the default for NetWare */
83 #define HTTPD_ROOT "/apache"
85 /** Set for all other OSs */
86 #define HTTPD_ROOT "/usr/local/apache"
88 #endif /* HTTPD_ROOT */
91 * --------- You shouldn't have to edit anything below this line ----------
93 * Any modifications to any defaults not defined above should be done in the
94 * respective configuration file.
99 * Default location of documents. Can be overridden by the DocumentRoot
102 #ifndef DOCUMENT_LOCATION
103 #define DOCUMENT_LOCATION HTTPD_ROOT "/htdocs"
104 #endif /* DOCUMENT_LOCATION */
106 /** Maximum number of dynamically loaded modules */
107 #ifndef DYNAMIC_MODULE_LIMIT
108 #define DYNAMIC_MODULE_LIMIT 128
111 /** Default administrator's address */
112 #define DEFAULT_ADMIN "[no address given]"
114 /** The name of the log files */
115 #ifndef DEFAULT_ERRORLOG
117 #define DEFAULT_ERRORLOG "logs/error.log"
119 #define DEFAULT_ERRORLOG "logs/error_log"
121 #endif /* DEFAULT_ERRORLOG */
123 /** Define this to be what your per-directory security files are called */
124 #ifndef DEFAULT_ACCESS_FNAME
125 #define DEFAULT_ACCESS_FNAME ".htaccess"
126 #endif /* DEFAULT_ACCESS_FNAME */
128 /** The name of the server config file */
129 #ifndef SERVER_CONFIG_FILE
130 #define SERVER_CONFIG_FILE "conf/httpd.conf"
133 /** The default path for CGI scripts if none is currently set */
135 #define DEFAULT_PATH "/bin:/usr/bin:/usr/ucb:/usr/bsd:/usr/local/bin"
138 /** The path to the suExec wrapper, can be overridden in Configuration */
140 #define SUEXEC_BIN HTTPD_ROOT "/bin/suexec"
143 /** The timeout for waiting for messages */
144 #ifndef DEFAULT_TIMEOUT
145 #define DEFAULT_TIMEOUT 300
148 /** The timeout for waiting for keepalive timeout until next request */
149 #ifndef DEFAULT_KEEPALIVE_TIMEOUT
150 #define DEFAULT_KEEPALIVE_TIMEOUT 5
153 /** The number of requests to entertain per connection */
154 #ifndef DEFAULT_KEEPALIVE
155 #define DEFAULT_KEEPALIVE 100
159 * Limits on the size of various request items. These limits primarily
160 * exist to prevent simple denial-of-service attacks on a server based
161 * on misuse of the protocol. The recommended values will depend on the
162 * nature of the server resources -- CGI scripts and database backends
163 * might require large values, but most servers could get by with much
164 * smaller limits than we use below. The request message body size can
165 * be limited by the per-dir config directive LimitRequestBody.
167 * Internal buffer sizes are two bytes more than the DEFAULT_LIMIT_REQUEST_LINE
168 * and DEFAULT_LIMIT_REQUEST_FIELDSIZE below, which explains the 8190.
169 * These two limits can be lowered (but not raised) by the server config
170 * directives LimitRequestLine and LimitRequestFieldsize, respectively.
172 * DEFAULT_LIMIT_REQUEST_FIELDS can be modified or disabled (set = 0) by
173 * the server config directive LimitRequestFields.
176 /** default limit on bytes in Request-Line (Method+URI+HTTP-version) */
177 #ifndef DEFAULT_LIMIT_REQUEST_LINE
178 #define DEFAULT_LIMIT_REQUEST_LINE 8190
180 /** default limit on bytes in any one header field */
181 #ifndef DEFAULT_LIMIT_REQUEST_FIELDSIZE
182 #define DEFAULT_LIMIT_REQUEST_FIELDSIZE 8190
184 /** default limit on number of request header fields */
185 #ifndef DEFAULT_LIMIT_REQUEST_FIELDS
186 #define DEFAULT_LIMIT_REQUEST_FIELDS 100
190 * The default default character set name to add if AddDefaultCharset is
191 * enabled. Overridden with AddDefaultCharsetName.
193 #define DEFAULT_ADD_DEFAULT_CHARSET_NAME "iso-8859-1"
195 /** default HTTP Server protocol */
196 #define AP_SERVER_PROTOCOL "HTTP/1.1"
199 /* ------------------ stuff that modules are allowed to look at ----------- */
201 /** Define this to be what your HTML directory content files are called */
202 #ifndef AP_DEFAULT_INDEX
203 #define AP_DEFAULT_INDEX "index.html"
206 /** The name of the MIME types file */
207 #ifndef AP_TYPES_CONFIG_FILE
208 #define AP_TYPES_CONFIG_FILE "conf/mime.types"
212 * Define the HTML doctype strings centrally.
214 /** HTML 2.0 Doctype */
215 #define DOCTYPE_HTML_2_0 "<!DOCTYPE HTML PUBLIC \"-//IETF//" \
216 "DTD HTML 2.0//EN\">\n"
217 /** HTML 3.2 Doctype */
218 #define DOCTYPE_HTML_3_2 "<!DOCTYPE HTML PUBLIC \"-//W3C//" \
219 "DTD HTML 3.2 Final//EN\">\n"
220 /** HTML 4.0 Strict Doctype */
221 #define DOCTYPE_HTML_4_0S "<!DOCTYPE HTML PUBLIC \"-//W3C//" \
222 "DTD HTML 4.0//EN\"\n" \
223 "\"http://www.w3.org/TR/REC-html40/strict.dtd\">\n"
224 /** HTML 4.0 Transitional Doctype */
225 #define DOCTYPE_HTML_4_0T "<!DOCTYPE HTML PUBLIC \"-//W3C//" \
226 "DTD HTML 4.0 Transitional//EN\"\n" \
227 "\"http://www.w3.org/TR/REC-html40/loose.dtd\">\n"
228 /** HTML 4.0 Frameset Doctype */
229 #define DOCTYPE_HTML_4_0F "<!DOCTYPE HTML PUBLIC \"-//W3C//" \
230 "DTD HTML 4.0 Frameset//EN\"\n" \
231 "\"http://www.w3.org/TR/REC-html40/frameset.dtd\">\n"
232 /** XHTML 1.0 Strict Doctype */
233 #define DOCTYPE_XHTML_1_0S "<!DOCTYPE html PUBLIC \"-//W3C//" \
234 "DTD XHTML 1.0 Strict//EN\"\n" \
235 "\"http://www.w3.org/TR/xhtml1/DTD/" \
236 "xhtml1-strict.dtd\">\n"
237 /** XHTML 1.0 Transitional Doctype */
238 #define DOCTYPE_XHTML_1_0T "<!DOCTYPE html PUBLIC \"-//W3C//" \
239 "DTD XHTML 1.0 Transitional//EN\"\n" \
240 "\"http://www.w3.org/TR/xhtml1/DTD/" \
241 "xhtml1-transitional.dtd\">\n"
242 /** XHTML 1.0 Frameset Doctype */
243 #define DOCTYPE_XHTML_1_0F "<!DOCTYPE html PUBLIC \"-//W3C//" \
244 "DTD XHTML 1.0 Frameset//EN\"\n" \
245 "\"http://www.w3.org/TR/xhtml1/DTD/" \
246 "xhtml1-frameset.dtd\">"
248 /** Internal representation for a HTTP protocol number, e.g., HTTP/1.1 */
249 #define HTTP_VERSION(major,minor) (1000*(major)+(minor))
250 /** Major part of HTTP protocol */
251 #define HTTP_VERSION_MAJOR(number) ((number)/1000)
252 /** Minor part of HTTP protocol */
253 #define HTTP_VERSION_MINOR(number) ((number)%1000)
255 /* -------------- Port number for server running standalone --------------- */
257 /** default HTTP Port */
258 #define DEFAULT_HTTP_PORT 80
259 /** default HTTPS Port */
260 #define DEFAULT_HTTPS_PORT 443
262 * Check whether @a port is the default port for the request @a r.
263 * @param port The port number
264 * @param r The request
265 * @see #ap_default_port
267 #define ap_is_default_port(port,r) ((port) == ap_default_port(r))
269 * Get the default port for a request (which depends on the scheme).
270 * @param r The request
272 #define ap_default_port(r) ap_run_default_port(r)
274 * Get the scheme for a request.
275 * @param r The request
277 #define ap_http_scheme(r) ap_run_http_scheme(r)
279 /** The default string length */
280 #define MAX_STRING_LEN HUGE_STRING_LEN
282 /** The length of a Huge string */
283 #define HUGE_STRING_LEN 8192
285 /** The size of the server's internal read-write buffers */
286 #define AP_IOBUFSIZE 8192
288 /** The max number of regex captures that can be expanded by ap_pregsub */
289 #define AP_MAX_REG_MATCH 10
292 * APR_HAS_LARGE_FILES introduces the problem of spliting sendfile into
293 * mutiple buckets, no greater than MAX(apr_size_t), and more granular
294 * than that in case the brigade code/filters attempt to read it directly.
295 * ### 16mb is an invention, no idea if it is reasonable.
297 #define AP_MAX_SENDFILE 16777216 /* 2^24 */
300 * Special Apache error codes. These are basically used
301 * in http_main.c so we can keep track of various errors.
305 #define APEXIT_OK 0x0
306 /** A fatal error arising during the server's init sequence */
307 #define APEXIT_INIT 0x2
308 /** The child died during its init sequence */
309 #define APEXIT_CHILDINIT 0x3
311 * The child exited due to a resource shortage.
312 * The parent should limit the rate of forking until
313 * the situation is resolved.
315 #define APEXIT_CHILDSICK 0x7
317 * A fatal error, resulting in the whole server aborting.
318 * If a child exits with this error, the parent process
319 * considers this a server-wide fatal error and aborts.
321 #define APEXIT_CHILDFATAL 0xf
325 * Stuff marked #AP_DECLARE is part of the API, and intended for use
326 * by modules. Its purpose is to allow us to add attributes that
327 * particular platforms or compilers require to every exported function.
329 # define AP_DECLARE(type) type
332 #ifndef AP_DECLARE_NONSTD
334 * Stuff marked #AP_DECLARE_NONSTD is part of the API, and intended for
335 * use by modules. The difference between #AP_DECLARE and
336 * #AP_DECLARE_NONSTD is that the latter is required for any functions
337 * which use varargs or are used via indirect function call. This
338 * is to accomodate the two calling conventions in windows dlls.
340 # define AP_DECLARE_NONSTD(type) type
342 #ifndef AP_DECLARE_DATA
343 # define AP_DECLARE_DATA
346 #ifndef AP_MODULE_DECLARE
347 # define AP_MODULE_DECLARE(type) type
349 #ifndef AP_MODULE_DECLARE_NONSTD
350 # define AP_MODULE_DECLARE_NONSTD(type) type
352 #ifndef AP_MODULE_DECLARE_DATA
353 # define AP_MODULE_DECLARE_DATA
358 * modules should not use functions marked AP_CORE_DECLARE
360 #ifndef AP_CORE_DECLARE
361 # define AP_CORE_DECLARE AP_DECLARE
366 * modules should not use functions marked AP_CORE_DECLARE_NONSTD
369 #ifndef AP_CORE_DECLARE_NONSTD
370 # define AP_CORE_DECLARE_NONSTD AP_DECLARE_NONSTD
374 * @brief The numeric version information is broken out into fields within this
378 int major; /**< major number */
379 int minor; /**< minor number */
380 int patch; /**< patch number */
381 const char *add_string; /**< additional string like "-dev" */
385 * Return httpd's version information in a numeric form.
387 * @param version Pointer to a version structure for returning the version
390 AP_DECLARE(void) ap_get_server_revision(ap_version_t *version);
393 * Get the server banner in a form suitable for sending over the
394 * network, with the level of information controlled by the
395 * ServerTokens directive.
396 * @return The server banner
398 AP_DECLARE(const char *) ap_get_server_banner(void);
401 * Get the server description in a form suitable for local displays,
402 * status reports, or logging. This includes the detailed server
403 * version and information about some modules. It is not affected
404 * by the ServerTokens directive.
405 * @return The server description
407 AP_DECLARE(const char *) ap_get_server_description(void);
410 * Add a component to the server description and banner strings
411 * @param pconf The pool to allocate the component from
412 * @param component The string to add
414 AP_DECLARE(void) ap_add_version_component(apr_pool_t *pconf, const char *component);
417 * Get the date a time that the server was built
418 * @return The server build time string
420 AP_DECLARE(const char *) ap_get_server_built(void);
422 /* non-HTTP status codes returned by hooks */
424 #define OK 0 /**< Module has handled this stage. */
425 #define DECLINED -1 /**< Module declines to handle */
426 #define DONE -2 /**< Module has served the response completely
427 * - it's safe to die() with no more output
429 #define SUSPENDED -3 /**< Module will handle the remainder of the request.
430 * The core will never invoke the request again, */
432 /** Returned by the bottom-most filter if no data was written.
433 * @see ap_pass_brigade(). */
434 #define AP_NOBODY_WROTE -100
435 /** Returned by the bottom-most filter if no data was read.
436 * @see ap_get_brigade(). */
437 #define AP_NOBODY_READ -101
438 /** Returned by any filter if the filter chain encounters an error
439 * and has already dealt with the error response.
441 #define AP_FILTER_ERROR -102
444 * @defgroup HTTP_Status HTTP Status Codes
448 * The size of the static array in http_protocol.c for storing
449 * all of the potential response status-lines (a sparse table).
450 * A future version should dynamically generate the apr_table_t at startup.
452 #define RESPONSE_CODES 57
454 #define HTTP_CONTINUE 100
455 #define HTTP_SWITCHING_PROTOCOLS 101
456 #define HTTP_PROCESSING 102
458 #define HTTP_CREATED 201
459 #define HTTP_ACCEPTED 202
460 #define HTTP_NON_AUTHORITATIVE 203
461 #define HTTP_NO_CONTENT 204
462 #define HTTP_RESET_CONTENT 205
463 #define HTTP_PARTIAL_CONTENT 206
464 #define HTTP_MULTI_STATUS 207
465 #define HTTP_MULTIPLE_CHOICES 300
466 #define HTTP_MOVED_PERMANENTLY 301
467 #define HTTP_MOVED_TEMPORARILY 302
468 #define HTTP_SEE_OTHER 303
469 #define HTTP_NOT_MODIFIED 304
470 #define HTTP_USE_PROXY 305
471 #define HTTP_TEMPORARY_REDIRECT 307
472 #define HTTP_BAD_REQUEST 400
473 #define HTTP_UNAUTHORIZED 401
474 #define HTTP_PAYMENT_REQUIRED 402
475 #define HTTP_FORBIDDEN 403
476 #define HTTP_NOT_FOUND 404
477 #define HTTP_METHOD_NOT_ALLOWED 405
478 #define HTTP_NOT_ACCEPTABLE 406
479 #define HTTP_PROXY_AUTHENTICATION_REQUIRED 407
480 #define HTTP_REQUEST_TIME_OUT 408
481 #define HTTP_CONFLICT 409
482 #define HTTP_GONE 410
483 #define HTTP_LENGTH_REQUIRED 411
484 #define HTTP_PRECONDITION_FAILED 412
485 #define HTTP_REQUEST_ENTITY_TOO_LARGE 413
486 #define HTTP_REQUEST_URI_TOO_LARGE 414
487 #define HTTP_UNSUPPORTED_MEDIA_TYPE 415
488 #define HTTP_RANGE_NOT_SATISFIABLE 416
489 #define HTTP_EXPECTATION_FAILED 417
490 #define HTTP_UNPROCESSABLE_ENTITY 422
491 #define HTTP_LOCKED 423
492 #define HTTP_FAILED_DEPENDENCY 424
493 #define HTTP_UPGRADE_REQUIRED 426
494 #define HTTP_INTERNAL_SERVER_ERROR 500
495 #define HTTP_NOT_IMPLEMENTED 501
496 #define HTTP_BAD_GATEWAY 502
497 #define HTTP_SERVICE_UNAVAILABLE 503
498 #define HTTP_GATEWAY_TIME_OUT 504
499 #define HTTP_VERSION_NOT_SUPPORTED 505
500 #define HTTP_VARIANT_ALSO_VARIES 506
501 #define HTTP_INSUFFICIENT_STORAGE 507
502 #define HTTP_NOT_EXTENDED 510
504 /** is the status code informational */
505 #define ap_is_HTTP_INFO(x) (((x) >= 100)&&((x) < 200))
506 /** is the status code OK ?*/
507 #define ap_is_HTTP_SUCCESS(x) (((x) >= 200)&&((x) < 300))
508 /** is the status code a redirect */
509 #define ap_is_HTTP_REDIRECT(x) (((x) >= 300)&&((x) < 400))
510 /** is the status code a error (client or server) */
511 #define ap_is_HTTP_ERROR(x) (((x) >= 400)&&((x) < 600))
512 /** is the status code a client error */
513 #define ap_is_HTTP_CLIENT_ERROR(x) (((x) >= 400)&&((x) < 500))
514 /** is the status code a server error */
515 #define ap_is_HTTP_SERVER_ERROR(x) (((x) >= 500)&&((x) < 600))
516 /** is the status code a (potentially) valid response code? */
517 #define ap_is_HTTP_VALID_RESPONSE(x) (((x) >= 100)&&((x) < 600))
519 /** should the status code drop the connection */
520 #define ap_status_drops_connection(x) \
521 (((x) == HTTP_BAD_REQUEST) || \
522 ((x) == HTTP_REQUEST_TIME_OUT) || \
523 ((x) == HTTP_LENGTH_REQUIRED) || \
524 ((x) == HTTP_REQUEST_ENTITY_TOO_LARGE) || \
525 ((x) == HTTP_REQUEST_URI_TOO_LARGE) || \
526 ((x) == HTTP_INTERNAL_SERVER_ERROR) || \
527 ((x) == HTTP_SERVICE_UNAVAILABLE) || \
528 ((x) == HTTP_NOT_IMPLEMENTED))
532 * @defgroup Methods List of Methods recognized by the server
533 * @ingroup APACHE_CORE_DAEMON
536 * @brief Methods recognized (but not necessarily handled) by the server.
538 * These constants are used in bit shifting masks of size int, so it is
539 * unsafe to have more methods than bits in an int. HEAD == M_GET.
540 * This list must be tracked by the list in http_protocol.c in routine
541 * ap_method_name_of().
545 #define M_GET 0 /** RFC 2616: HTTP */
546 #define M_PUT 1 /* : */
551 #define M_TRACE 6 /** RFC 2616: HTTP */
552 #define M_PATCH 7 /** no rfc(!) ### remove this one? */
553 #define M_PROPFIND 8 /** RFC 2518: WebDAV */
554 #define M_PROPPATCH 9 /* : */
559 #define M_UNLOCK 14 /** RFC 2518: WebDAV */
560 #define M_VERSION_CONTROL 15 /** RFC 3253: WebDAV Versioning */
561 #define M_CHECKOUT 16 /* : */
562 #define M_UNCHECKOUT 17
567 #define M_MKWORKSPACE 22
568 #define M_MKACTIVITY 23
569 #define M_BASELINE_CONTROL 24
571 #define M_INVALID 26 /** RFC 3253: WebDAV Versioning */
574 * METHODS needs to be equal to the number of bits
575 * we are using for limit masks.
580 * The method mask bit to shift for anding with a bitmask.
582 #define AP_METHOD_BIT ((apr_int64_t)1)
586 /** @see ap_method_list_t */
587 typedef struct ap_method_list_t ap_method_list_t;
590 * @struct ap_method_list_t
591 * @brief Structure for handling HTTP methods.
593 * Methods known to the server are accessed via a bitmask shortcut;
594 * extension methods are handled by an array.
596 struct ap_method_list_t {
597 /** The bitmask used for known methods */
598 apr_int64_t method_mask;
599 /** the array used for extension methods */
600 apr_array_header_t *method_list;
604 * @defgroup module_magic Module Magic mime types
607 /** Magic for mod_cgi[d] */
608 #define CGI_MAGIC_TYPE "application/x-httpd-cgi"
609 /** Magic for mod_include */
610 #define INCLUDES_MAGIC_TYPE "text/x-server-parsed-html"
611 /** Magic for mod_include */
612 #define INCLUDES_MAGIC_TYPE3 "text/x-server-parsed-html3"
613 /** Magic for mod_dir */
614 #define DIR_MAGIC_TYPE "httpd/unix-directory"
617 /* Just in case your linefeed isn't the one the other end is expecting. */
618 #if !APR_CHARSET_EBCDIC
621 /** carrige return */
623 /** carrige return /Line Feed Combo */
624 #define CRLF "\015\012"
625 #else /* APR_CHARSET_EBCDIC */
626 /* For platforms using the EBCDIC charset, the transition ASCII->EBCDIC is done
627 * in the buff package (bread/bputs/bwrite). Everywhere else, we use
628 * "native EBCDIC" CR and NL characters. These are therefore
635 #endif /* APR_CHARSET_EBCDIC */
636 /** Useful for common code with either platform charset. */
637 #define CRLF_ASCII "\015\012"
640 * @defgroup values_request_rec_body Possible values for request_rec.read_body
642 * Possible values for request_rec.read_body (set by handling module):
645 /** Send 413 error if message has any body */
646 #define REQUEST_NO_BODY 0
647 /** Send 411 error if body without Content-Length */
648 #define REQUEST_CHUNKED_ERROR 1
649 /** If chunked, remove the chunks for me. */
650 #define REQUEST_CHUNKED_DECHUNK 2
651 /** @} // values_request_rec_body */
654 * @defgroup values_request_rec_used_path_info Possible values for request_rec.used_path_info
655 * @ingroup APACHE_CORE_DAEMON
657 * Possible values for request_rec.used_path_info:
660 /** Accept the path_info from the request */
661 #define AP_REQ_ACCEPT_PATH_INFO 0
662 /** Return a 404 error if path_info was given */
663 #define AP_REQ_REJECT_PATH_INFO 1
664 /** Module may chose to use the given path_info */
665 #define AP_REQ_DEFAULT_PATH_INFO 2
667 /** @} // values_request_rec_used_path_info */
671 * Things which may vary per file-lookup WITHIN a request ---
672 * e.g., state of MIME config. Basically, the name of an object, info
673 * about the object, and any other info we may ahve which may need to
674 * change as we go poking around looking for it (e.g., overridden by
677 * Note how the default state of almost all these things is properly
678 * zero, so that allocating it with pcalloc does the right thing without
679 * a whole lot of hairy initialization... so long as we are willing to
680 * make the (fairly) portable assumption that the bit pattern of a NULL
681 * pointer is, in fact, zero.
685 * @brief This represents the result of calling htaccess; these are cached for
688 struct htaccess_result {
689 /** the directory to which this applies */
691 /** the overrides allowed for the .htaccess file */
693 /** the override options allowed for the .htaccess file */
695 /** the configuration directives */
696 struct ap_conf_vector_t *htaccess;
697 /** the next one, or NULL if no more; N.B. never change this */
698 const struct htaccess_result *next;
701 /* The following four types define a hierarchy of activities, so that
702 * given a request_rec r you can write r->connection->server->process
703 * to get to the process_rec. While this reduces substantially the
704 * number of arguments that various hooks require beware that in
705 * threaded versions of the server you must consider multiplexing
709 /** A structure that represents one process */
710 typedef struct process_rec process_rec;
711 /** A structure that represents a virtual server */
712 typedef struct server_rec server_rec;
713 /** A structure that represents one connection */
714 typedef struct conn_rec conn_rec;
715 /** A structure that represents the current request */
716 typedef struct request_rec request_rec;
717 /** A structure that represents the status of the current connection */
718 typedef struct conn_state_t conn_state_t;
720 /* ### would be nice to not include this from httpd.h ... */
721 /* This comes after we have defined the request_rec type */
725 * @brief A structure that represents one process
728 /** Global pool. Cleared upon normal exit */
730 /** Configuration pool. Cleared upon restart */
732 /** Number of command line arguments passed to the program */
734 /** The command line arguments */
735 const char * const *argv;
736 /** The program name used to execute the program */
737 const char *short_name;
741 * @brief A structure that represents the current request
744 /** The pool associated with the request */
746 /** The connection to the client */
747 conn_rec *connection;
748 /** The virtual host for this request */
751 /** Pointer to the redirected request if this is an external redirect */
753 /** Pointer to the previous request if this is an internal redirect */
756 /** Pointer to the main request if this is a sub-request
757 * (see http_request.h) */
760 /* Info about the request itself... we begin with stuff that only
761 * protocol.c should ever touch...
763 /** First line of request */
765 /** HTTP/0.9, "simple" request (e.g. GET /foo\n w/no headers) */
767 /** A proxy request (calculated during post_read_request/translate_name)
768 * possible values PROXYREQ_NONE, PROXYREQ_PROXY, PROXYREQ_REVERSE,
772 /** HEAD request, as opposed to GET */
774 /** Protocol string, as given to us, or HTTP/0.9 */
776 /** Protocol version number of protocol; 1.1 = 1001 */
778 /** Host, as set by full URI or Host: */
779 const char *hostname;
781 /** Time when the request started */
782 apr_time_t request_time;
784 /** Status line, if set by script */
785 const char *status_line;
789 /* Request method, two ways; also, protocol, etc.. Outside of protocol.c,
790 * look, but don't touch.
793 /** Request method (eg. GET, HEAD, POST, etc.) */
795 /** M_GET, M_POST, etc. */
799 * 'allowed' is a bitvector of the allowed methods.
801 * A handler must ensure that the request method is one that
802 * it is capable of handling. Generally modules should DECLINE
803 * any request methods they do not handle. Prior to aborting the
804 * handler like this the handler should set r->allowed to the list
805 * of methods that it is willing to handle. This bitvector is used
806 * to construct the "Allow:" header required for OPTIONS requests,
807 * and HTTP_METHOD_NOT_ALLOWED and HTTP_NOT_IMPLEMENTED status codes.
809 * Since the default_handler deals with OPTIONS, all modules can
810 * usually decline to deal with OPTIONS. TRACE is always allowed,
811 * modules don't need to set it explicitly.
813 * Since the default_handler will always handle a GET, a
814 * module which does *not* implement GET should probably return
815 * HTTP_METHOD_NOT_ALLOWED. Unfortunately this means that a Script GET
816 * handler can't be installed by mod_actions.
819 /** Array of extension methods */
820 apr_array_header_t *allowed_xmethods;
821 /** List of allowed methods */
822 ap_method_list_t *allowed_methods;
824 /** byte count in stream is for body */
825 apr_off_t sent_bodyct;
826 /** body byte count, for easy access */
827 apr_off_t bytes_sent;
828 /** Last modified time of the requested resource */
831 /* HTTP/1.1 connection-level features */
833 /** sending chunked transfer-coding */
835 /** The Range: header */
837 /** The "real" content length */
840 /** Remaining bytes left to read from the request body */
842 /** Number of bytes that have been read from the request body */
843 apr_off_t read_length;
844 /** Method for reading the request body
845 * (eg. REQUEST_CHUNKED_ERROR, REQUEST_NO_BODY,
846 * REQUEST_CHUNKED_DECHUNK, etc...) */
848 /** reading chunked transfer-coding */
850 /** is client waiting for a 100 response? */
851 unsigned expecting_100;
853 /* MIME header environments, in and out. Also, an array containing
854 * environment variables to be passed to subprocesses, so people can
855 * write modules to add to that environment.
857 * The difference between headers_out and err_headers_out is that the
858 * latter are printed even on error, and persist across internal redirects
859 * (so the headers printed for ErrorDocument handlers will have them).
861 * The 'notes' apr_table_t is for notes from one module to another, with no
862 * other set purpose in mind...
865 /** MIME header environment from the request */
866 apr_table_t *headers_in;
867 /** MIME header environment for the response */
868 apr_table_t *headers_out;
869 /** MIME header environment for the response, printed even on errors and
870 * persist across internal redirects */
871 apr_table_t *err_headers_out;
872 /** Array of environment variables to be used for sub processes */
873 apr_table_t *subprocess_env;
874 /** Notes from one module to another */
877 /* content_type, handler, content_encoding, and all content_languages
878 * MUST be lowercased strings. They may be pointers to static strings;
879 * they should not be modified in place.
881 /** The content-type for the current request */
882 const char *content_type; /* Break these out --- we dispatch on 'em */
883 /** The handler string that we use to call a handler function */
884 const char *handler; /* What we *really* dispatch on */
886 /** How to encode the data */
887 const char *content_encoding;
888 /** Array of strings representing the content languages */
889 apr_array_header_t *content_languages;
891 /** variant list validator (if negotiated) */
892 char *vlist_validator;
894 /** If an authentication check was made, this gets set to the user name. */
896 /** If an authentication check was made, this gets set to the auth type. */
899 /** This response can not be cached */
901 /** There is no local copy of this response */
904 /* What object is being requested (either directly, or via include
905 * or content-negotiation mapping).
908 /** The URI without any parsing performed */
910 /** The path portion of the URI */
912 /** The filename on disk corresponding to this response */
914 /* XXX: What does this mean? Please define "canonicalize" -aaron */
915 /** The true filename, we canonicalize r->filename if these don't match */
916 char *canonical_filename;
917 /** The PATH_INFO extracted from this request */
919 /** The QUERY_ARGS extracted from this request */
921 /** finfo.protection (st_mode) set to zero if no such file */
923 /** A struct containing the components of URI */
924 apr_uri_t parsed_uri;
927 * Flag for the handler to accept or reject path_info on
928 * the current request. All modules should respect the
929 * AP_REQ_ACCEPT_PATH_INFO and AP_REQ_REJECT_PATH_INFO
930 * values, while AP_REQ_DEFAULT_PATH_INFO indicates they
931 * may follow existing conventions. This is set to the
932 * user's preference upon HOOK_VERY_FIRST of the fixups.
936 /* Various other config info which may change with .htaccess files
937 * These are config vectors, with one void* pointer for each module
938 * (the thing pointed to being the module's business).
941 /** Options set in config files, etc. */
942 struct ap_conf_vector_t *per_dir_config;
943 /** Notes on *this* request */
944 struct ap_conf_vector_t *request_config;
947 * A linked list of the .htaccess configuration directives
948 * accessed by this request.
949 * N.B. always add to the head of the list, _never_ to the end.
950 * that way, a sub request's list can (temporarily) point to a parent's list
952 const struct htaccess_result *htaccess;
954 /** A list of output filters to be used for this request */
955 struct ap_filter_t *output_filters;
956 /** A list of input filters to be used for this request */
957 struct ap_filter_t *input_filters;
959 /** A list of protocol level output filters to be used for this
961 struct ap_filter_t *proto_output_filters;
962 /** A list of protocol level input filters to be used for this
964 struct ap_filter_t *proto_input_filters;
966 /** A flag to determine if the eos bucket has been sent yet */
969 /** The optional kept body of the request. */
970 apr_bucket_brigade *kept_body;
972 apr_thread_mutex_t *invoke_mtx;
974 apr_table_t *body_table;
976 /* Things placed at the end of the record to avoid breaking binary
977 * compatibility. It would be nice to remember to reorder the entire
978 * record to improve 64bit alignment the next time we need to break
979 * binary compatibility for some other reason.
984 * @defgroup ProxyReq Proxy request types
986 * Possible values of request_rec->proxyreq. A request could be normal,
987 * proxied or reverse proxied. Normally proxied and reverse proxied are
988 * grouped together as just "proxied", but sometimes it's necessary to
989 * tell the difference between the two, such as for authentication.
993 #define PROXYREQ_NONE 0 /**< No proxy */
994 #define PROXYREQ_PROXY 1 /**< Standard proxy */
995 #define PROXYREQ_REVERSE 2 /**< Reverse proxy */
996 #define PROXYREQ_RESPONSE 3 /**< Origin response */
1001 * @brief Enumeration of connection keepalive options
1007 } ap_conn_keepalive_e;
1010 * @brief Structure to store things which are per connection
1013 /** Pool associated with this connection */
1015 /** Physical vhost this conn came in on */
1016 server_rec *base_server;
1017 /** used by http_vhost.c */
1018 void *vhost_lookup_data;
1020 /* Information about the connection itself */
1021 /** local address */
1022 apr_sockaddr_t *local_addr;
1023 /** remote address */
1024 apr_sockaddr_t *remote_addr;
1026 /** Client's IP address */
1028 /** Client's DNS name, if known. NULL if DNS hasn't been checked,
1029 * "" if it has and no address was found. N.B. Only access this though
1030 * get_remote_host() */
1032 /** Only ever set if doing rfc1413 lookups. N.B. Only access this through
1033 * get_remote_logname() */
1034 char *remote_logname;
1036 /** Are we still talking? */
1039 /** Are we going to keep the connection alive for another request?
1040 * @see ap_conn_keepalive_e */
1041 ap_conn_keepalive_e keepalive;
1043 /** have we done double-reverse DNS? -1 yes/failure, 0 not yet,
1045 signed int double_reverse:2;
1047 /** How many times have we used it? */
1049 /** server IP address */
1051 /** used for ap_get_server_name when UseCanonicalName is set to DNS
1052 * (ignores setting of HostnameLookups) */
1055 /** ID of this connection; unique at any point in time */
1057 /** Config vector containing pointers to connections per-server
1058 * config structures. */
1059 struct ap_conf_vector_t *conn_config;
1060 /** Notes on *this* connection: send note from one module to
1061 * another. must remain valid for all requests on this conn */
1063 /** A list of input filters to be used for this connection */
1064 struct ap_filter_t *input_filters;
1065 /** A list of output filters to be used for this connection */
1066 struct ap_filter_t *output_filters;
1067 /** handle to scoreboard information for this connection */
1069 /** The bucket allocator to use for all bucket/brigade creations */
1070 struct apr_bucket_alloc_t *bucket_alloc;
1071 /** The current state of this connection */
1073 /** Is there data pending in the input filters? */
1074 int data_in_input_filters;
1075 /** Is there data pending in the output filters? */
1076 int data_in_output_filters;
1078 /** Are there any filters that clogg/buffer the input stream, breaking
1081 int clogging_input_filters;
1083 /** This points to the current thread being used to process this request,
1084 * over the lifetime of a request, the value may change. Users of the connection
1085 * record should not rely upon it staying the same between calls that invole
1089 apr_thread_t *current_thread;
1094 * Enumeration of connection states
1097 CONN_STATE_CHECK_REQUEST_LINE_READABLE,
1098 CONN_STATE_READ_REQUEST_LINE,
1100 CONN_STATE_WRITE_COMPLETION,
1101 CONN_STATE_SUSPENDED,
1106 * @brief A structure to contain connection state information
1108 struct conn_state_t {
1109 /** APR_RING of expiration timeouts */
1110 APR_RING_ENTRY(conn_state_t) timeout_list;
1111 /** the expiration time of the next keepalive timeout */
1112 apr_time_t expiration_time;
1113 /** Current state of the connection */
1115 /** connection record this struct refers to */
1117 /** memory pool to allocate from */
1119 /** bucket allocator */
1120 apr_bucket_alloc_t *bucket_alloc;
1121 /** poll file decriptor information */
1125 /* Per-vhost config... */
1128 * The address 255.255.255.255, when used as a virtualhost address,
1129 * will become the "default" server when the ip doesn't match other vhosts.
1131 #define DEFAULT_VHOST_ADDR 0xfffffffful
1135 * @struct server_addr_rec
1136 * @brief A structure to be used for Per-vhost config
1138 typedef struct server_addr_rec server_addr_rec;
1139 struct server_addr_rec {
1140 /** The next server in the list */
1141 server_addr_rec *next;
1142 /** The bound address, for this server */
1143 apr_sockaddr_t *host_addr;
1144 /** The bound port, for this server */
1145 apr_port_t host_port;
1146 /** The name given in "<VirtualHost>" */
1151 * @brief A structure to store information for each virtual server
1154 /** The process this server is running in */
1155 process_rec *process;
1156 /** The next server in the list */
1159 /** The name of the server */
1160 const char *defn_name;
1161 /** The line of the config file that the server was defined on */
1162 unsigned defn_line_number;
1164 /* Contact information */
1166 /** The admin's contact information */
1168 /** The server hostname */
1169 char *server_hostname;
1170 /** for redirects, etc. */
1173 /* Log files --- note that transfer log is now in the modules... */
1175 /** The name of the error log */
1177 /** A file descriptor that references the error log */
1178 apr_file_t *error_log;
1179 /** The log level for this server */
1182 /* Module-specific configuration for server, and defaults... */
1184 /** true if this is the virtual server */
1186 /** Config vector containing pointers to modules' per-server config
1188 struct ap_conf_vector_t *module_config;
1189 /** MIME type info, etc., before we start checking per-directory info */
1190 struct ap_conf_vector_t *lookup_defaults;
1192 /* Transaction handling */
1194 /** I haven't got a clue */
1195 server_addr_rec *addrs;
1196 /** Timeout, as an apr interval, before we give up */
1197 apr_interval_time_t timeout;
1198 /** The apr interval we will wait for another request */
1199 apr_interval_time_t keep_alive_timeout;
1200 /** Maximum requests per connection */
1202 /** Use persistent connections? */
1205 /** Pathname for ServerPath */
1207 /** Length of path */
1210 /** Normal names for ServerAlias servers */
1211 apr_array_header_t *names;
1212 /** Wildcarded names for ServerAlias servers */
1213 apr_array_header_t *wild_names;
1215 /** limit on size of the HTTP request line */
1217 /** limit on size of any request header field */
1218 int limit_req_fieldsize;
1219 /** limit on number of request header fields */
1220 int limit_req_fields;
1222 /** The server request scheme for redirect responses */
1223 const char *server_scheme;
1226 typedef struct core_output_filter_ctx {
1227 apr_bucket_brigade *buffered_bb;
1228 apr_size_t bytes_in;
1229 apr_size_t bytes_written;
1230 } core_output_filter_ctx_t;
1232 typedef struct core_filter_ctx {
1233 apr_bucket_brigade *b;
1234 apr_bucket_brigade *tmpbb;
1237 typedef struct core_net_rec {
1238 /** Connection to the client */
1239 apr_socket_t *client_socket;
1241 /** connection record */
1244 core_output_filter_ctx_t *out_ctx;
1249 * Examine a field value (such as a media-/content-type) string and return
1250 * it sans any parameters; e.g., strip off any ';charset=foo' and the like.
1251 * @param p Pool to allocate memory from
1252 * @param intype The field to examine
1253 * @return A copy of the field minus any parameters
1255 AP_DECLARE(char *) ap_field_noparam(apr_pool_t *p, const char *intype);
1258 * Convert a time from an integer into a string in a specified format
1259 * @param p The pool to allocate memory from
1260 * @param t The time to convert
1261 * @param fmt The format to use for the conversion
1262 * @param gmt Convert the time for GMT?
1263 * @return The string that represents the specified time
1265 AP_DECLARE(char *) ap_ht_time(apr_pool_t *p, apr_time_t t, const char *fmt, int gmt);
1267 /* String handling. The *_nc variants allow you to use non-const char **s as
1268 arguments (unfortunately C won't automatically convert a char ** to a const
1272 * Get the characters until the first occurance of a specified character
1273 * @param p The pool to allocate memory from
1274 * @param line The string to get the characters from
1275 * @param stop The character to stop at
1276 * @return A copy of the characters up to the first stop character
1278 AP_DECLARE(char *) ap_getword(apr_pool_t *p, const char **line, char stop);
1281 * Get the characters until the first occurance of a specified character
1282 * @param p The pool to allocate memory from
1283 * @param line The string to get the characters from
1284 * @param stop The character to stop at
1285 * @return A copy of the characters up to the first stop character
1286 * @note This is the same as ap_getword(), except it doesn't use const char **.
1288 AP_DECLARE(char *) ap_getword_nc(apr_pool_t *p, char **line, char stop);
1291 * Get the first word from a given string. A word is defined as all characters
1292 * up to the first whitespace.
1293 * @param p The pool to allocate memory from
1294 * @param line The string to traverse
1295 * @return The first word in the line
1297 AP_DECLARE(char *) ap_getword_white(apr_pool_t *p, const char **line);
1300 * Get the first word from a given string. A word is defined as all characters
1301 * up to the first whitespace.
1302 * @param p The pool to allocate memory from
1303 * @param line The string to traverse
1304 * @return The first word in the line
1305 * @note The same as ap_getword_white(), except it doesn't use const char**
1307 AP_DECLARE(char *) ap_getword_white_nc(apr_pool_t *p, char **line);
1310 * Get all characters from the first occurance of @a stop to the first "\0"
1311 * @param p The pool to allocate memory from
1312 * @param line The line to traverse
1313 * @param stop The character to start at
1314 * @return A copy of all caracters after the first occurance of the specified
1317 AP_DECLARE(char *) ap_getword_nulls(apr_pool_t *p, const char **line,
1321 * Get all characters from the first occurance of @a stop to the first "\0"
1322 * @param p The pool to allocate memory from
1323 * @param line The line to traverse
1324 * @param stop The character to start at
1325 * @return A copy of all caracters after the first occurance of the specified
1327 * @note The same as ap_getword_nulls(), except it doesn't use const char **.
1329 AP_DECLARE(char *) ap_getword_nulls_nc(apr_pool_t *p, char **line, char stop);
1332 * Get the second word in the string paying attention to quoting
1333 * @param p The pool to allocate from
1334 * @param line The line to traverse
1335 * @return A copy of the string
1337 AP_DECLARE(char *) ap_getword_conf(apr_pool_t *p, const char **line);
1340 * Get the second word in the string paying attention to quoting
1341 * @param p The pool to allocate from
1342 * @param line The line to traverse
1343 * @return A copy of the string
1344 * @note The same as ap_getword_conf(), except it doesn't use const char **.
1346 AP_DECLARE(char *) ap_getword_conf_nc(apr_pool_t *p, char **line);
1349 * Check a string for any ${ENV} environment variable construct and replace
1350 * each them by the value of that environment variable, if it exists. If the
1351 * environment value does not exist, leave the ${ENV} construct alone; it
1352 * means something else.
1353 * @param p The pool to allocate from
1354 * @param word The string to check
1355 * @return The string with the replaced environment variables
1357 AP_DECLARE(const char *) ap_resolve_env(apr_pool_t *p, const char * word);
1360 * Size an HTTP header field list item, as separated by a comma.
1361 * @param field The field to size
1362 * @param len The length of the field
1363 * @return The return value is a pointer to the beginning of the non-empty
1364 * list item within the original string (or NULL if there is none) and the
1365 * address of field is shifted to the next non-comma, non-whitespace
1366 * character. len is the length of the item excluding any beginning whitespace.
1368 AP_DECLARE(const char *) ap_size_list_item(const char **field, int *len);
1371 * Retrieve an HTTP header field list item, as separated by a comma,
1372 * while stripping insignificant whitespace and lowercasing anything not in
1373 * a quoted string or comment.
1374 * @param p The pool to allocate from
1375 * @param field The field to retrieve
1376 * @return The return value is a new string containing the converted list
1377 * item (or NULL if none) and the address pointed to by field is
1378 * shifted to the next non-comma, non-whitespace.
1380 AP_DECLARE(char *) ap_get_list_item(apr_pool_t *p, const char **field);
1383 * Find an item in canonical form (lowercase, no extra spaces) within
1384 * an HTTP field value list.
1385 * @param p The pool to allocate from
1386 * @param line The field value list to search
1387 * @param tok The token to search for
1388 * @return 1 if found, 0 if not found.
1390 AP_DECLARE(int) ap_find_list_item(apr_pool_t *p, const char *line, const char *tok);
1393 * Retrieve a token, spacing over it and adjusting the pointer to
1394 * the first non-white byte afterwards. Note that these tokens
1395 * are delimited by semis and commas and can also be delimited
1396 * by whitespace at the caller's option.
1397 * @param p The pool to allocate from
1398 * @param accept_line The line to retrieve the token from (adjusted afterwards)
1399 * @param accept_white Is it delimited by whitespace
1402 AP_DECLARE(char *) ap_get_token(apr_pool_t *p, const char **accept_line, int accept_white);
1405 * Find http tokens, see the definition of token from RFC2068
1406 * @param p The pool to allocate from
1407 * @param line The line to find the token
1408 * @param tok The token to find
1409 * @return 1 if the token is found, 0 otherwise
1411 AP_DECLARE(int) ap_find_token(apr_pool_t *p, const char *line, const char *tok);
1414 * find http tokens from the end of the line
1415 * @param p The pool to allocate from
1416 * @param line The line to find the token
1417 * @param tok The token to find
1418 * @return 1 if the token is found, 0 otherwise
1420 AP_DECLARE(int) ap_find_last_token(apr_pool_t *p, const char *line, const char *tok);
1423 * Check for an Absolute URI syntax
1424 * @param u The string to check
1425 * @return 1 if URI, 0 otherwise
1427 AP_DECLARE(int) ap_is_url(const char *u);
1431 * @param url The string to unescape
1432 * @return 0 on success, non-zero otherwise
1434 AP_DECLARE(int) ap_unescape_all(char *url);
1438 * @param url The url to unescape
1439 * @return 0 on success, non-zero otherwise
1441 AP_DECLARE(int) ap_unescape_url(char *url);
1444 * Unescape a URL, but leaving %2f (slashes) escaped
1445 * @param url The url to unescape
1446 * @return 0 on success, non-zero otherwise
1448 AP_DECLARE(int) ap_unescape_url_keep2f(char *url);
1451 * Convert all double slashes to single slashes
1452 * @param name The string to convert
1454 AP_DECLARE(void) ap_no2slash(char *name);
1457 * Remove all ./ and xx/../ substrings from a file name. Also remove
1458 * any leading ../ or /../ substrings.
1459 * @param name the file name to parse
1461 AP_DECLARE(void) ap_getparents(char *name);
1464 * Escape a path segment, as defined in RFC 1808
1465 * @param p The pool to allocate from
1466 * @param s The path to convert
1467 * @return The converted URL
1469 AP_DECLARE(char *) ap_escape_path_segment(apr_pool_t *p, const char *s);
1472 * Escape a path segment, as defined in RFC 1808, to a preallocated buffer.
1473 * @param c The preallocated buffer to write to
1474 * @param s The path to convert
1475 * @return The converted URL (c)
1477 AP_DECLARE(char *) ap_escape_path_segment_buffer(char *c, const char *s);
1480 * convert an OS path to a URL in an OS dependant way.
1481 * @param p The pool to allocate from
1482 * @param path The path to convert
1483 * @param partial if set, assume that the path will be appended to something
1484 * with a '/' in it (and thus does not prefix "./")
1485 * @return The converted URL
1487 AP_DECLARE(char *) ap_os_escape_path(apr_pool_t *p, const char *path, int partial);
1489 /** @see ap_os_escape_path */
1490 #define ap_escape_uri(ppool,path) ap_os_escape_path(ppool,path,1)
1493 * Escape an html string
1494 * @param p The pool to allocate from
1495 * @param s The html to escape
1496 * @return The escaped string
1498 #define ap_escape_html(p,s) ap_escape_html2(p,s,0)
1500 * Escape an html string
1501 * @param p The pool to allocate from
1502 * @param s The html to escape
1503 * @param toasc Whether to escape all non-ASCII chars to &#nnn;
1504 * @return The escaped string
1506 AP_DECLARE(char *) ap_escape_html2(apr_pool_t *p, const char *s, int toasc);
1509 * Escape a string for logging
1510 * @param p The pool to allocate from
1511 * @param str The string to escape
1512 * @return The escaped string
1514 AP_DECLARE(char *) ap_escape_logitem(apr_pool_t *p, const char *str);
1517 * Escape a string for logging into the error log (without a pool)
1518 * @param dest The buffer to write to
1519 * @param source The string to escape
1520 * @param buflen The buffer size for the escaped string (including "\0")
1521 * @return The len of the escaped string (always < maxlen)
1523 AP_DECLARE(apr_size_t) ap_escape_errorlog_item(char *dest, const char *source,
1527 * Construct a full hostname
1528 * @param p The pool to allocate from
1529 * @param hostname The hostname of the server
1530 * @param port The port the server is running on
1531 * @param r The current request
1532 * @return The server's hostname
1534 AP_DECLARE(char *) ap_construct_server(apr_pool_t *p, const char *hostname,
1535 apr_port_t port, const request_rec *r);
1538 * Escape a shell command
1539 * @param p The pool to allocate from
1540 * @param s The command to escape
1541 * @return The escaped shell command
1543 AP_DECLARE(char *) ap_escape_shell_cmd(apr_pool_t *p, const char *s);
1546 * Count the number of directories in a path
1547 * @param path The path to count
1548 * @return The number of directories
1550 AP_DECLARE(int) ap_count_dirs(const char *path);
1553 * Copy at most @a n leading directories of @a s into @a d. @a d
1554 * should be at least as large as @a s plus 1 extra byte
1556 * @param d The location to copy to
1557 * @param s The location to copy from
1558 * @param n The number of directories to copy
1559 * @return value is the ever useful pointer to the trailing "\0" of d
1560 * @note on platforms with drive letters, n = 0 returns the "/" root,
1561 * whereas n = 1 returns the "d:/" root. On all other platforms, n = 0
1562 * returns the empty string. */
1563 AP_DECLARE(char *) ap_make_dirstr_prefix(char *d, const char *s, int n);
1566 * Return the parent directory name (including trailing /) of the file
1568 * @param p The pool to allocate from
1569 * @param s The file to get the parent of
1570 * @return A copy of the file's parent directory
1572 AP_DECLARE(char *) ap_make_dirstr_parent(apr_pool_t *p, const char *s);
1575 * Given a directory and filename, create a single path from them. This
1576 * function is smart enough to ensure that there is a sinlge '/' between the
1577 * directory and file names
1578 * @param a The pool to allocate from
1579 * @param dir The directory name
1580 * @param f The filename
1581 * @return A copy of the full path
1582 * @note Never consider using this function if you are dealing with filesystem
1583 * names that need to remain canonical, unless you are merging an apr_dir_read
1584 * path and returned filename. Otherwise, the result is not canonical.
1586 AP_DECLARE(char *) ap_make_full_path(apr_pool_t *a, const char *dir, const char *f);
1589 * Test if the given path has an an absolute path.
1590 * @param p The pool to allocate from
1591 * @param dir The directory name
1592 * @note The converse is not necessarily true, some OS's (Win32/Netware) have
1593 * multiple forms of absolute paths. This only reports if the path is absolute
1594 * in a canonical sense.
1596 AP_DECLARE(int) ap_os_is_path_absolute(apr_pool_t *p, const char *dir);
1599 * Does the provided string contain wildcard characters? This is useful
1600 * for determining if the string should be passed to strcmp_match or to strcmp.
1601 * The only wildcard characters recognized are '?' and '*'
1602 * @param str The string to check
1603 * @return 1 if the string has wildcards, 0 otherwise
1605 AP_DECLARE(int) ap_is_matchexp(const char *str);
1608 * Determine if a string matches a patterm containing the wildcards '?' or '*'
1609 * @param str The string to check
1610 * @param expected The pattern to match against
1611 * @return 1 if the two strings match, 0 otherwise
1613 AP_DECLARE(int) ap_strcmp_match(const char *str, const char *expected);
1616 * Determine if a string matches a patterm containing the wildcards '?' or '*',
1618 * @param str The string to check
1619 * @param expected The pattern to match against
1620 * @return 1 if the two strings match, 0 otherwise
1622 AP_DECLARE(int) ap_strcasecmp_match(const char *str, const char *expected);
1625 * Find the first occurrence of the substring s2 in s1, regardless of case
1626 * @param s1 The string to search
1627 * @param s2 The substring to search for
1628 * @return A pointer to the beginning of the substring
1629 * @remark See apr_strmatch() for a faster alternative
1631 AP_DECLARE(char *) ap_strcasestr(const char *s1, const char *s2);
1634 * Return a pointer to the location inside of bigstring immediately after prefix
1635 * @param bigstring The input string
1636 * @param prefix The prefix to strip away
1637 * @return A pointer relative to bigstring after prefix
1639 AP_DECLARE(const char *) ap_stripprefix(const char *bigstring,
1640 const char *prefix);
1643 * Decode a base64 encoded string into memory allocated from a pool
1644 * @param p The pool to allocate from
1645 * @param bufcoded The encoded string
1646 * @return The decoded string
1648 AP_DECLARE(char *) ap_pbase64decode(apr_pool_t *p, const char *bufcoded);
1651 * Encode a string into memory allocated from a pool in base 64 format
1652 * @param p The pool to allocate from
1653 * @param string The plaintext string
1654 * @return The encoded string
1656 AP_DECLARE(char *) ap_pbase64encode(apr_pool_t *p, char *string);
1659 * Compile a regular expression to be used later
1660 * @param p The pool to allocate from
1661 * @param pattern the regular expression to compile
1662 * @param cflags The bitwise or of one or more of the following:
1663 * @li REG_EXTENDED - Use POSIX extended Regular Expressions
1664 * @li REG_ICASE - Ignore case
1665 * @li REG_NOSUB - Support for substring addressing of matches
1667 * @li REG_NEWLINE - Match-any-character operators don't match new-line
1668 * @return The compiled regular expression
1670 AP_DECLARE(ap_regex_t *) ap_pregcomp(apr_pool_t *p, const char *pattern,
1674 * Free the memory associated with a compiled regular expression
1675 * @param p The pool the regex was allocated from
1676 * @param reg The regular expression to free
1678 AP_DECLARE(void) ap_pregfree(apr_pool_t *p, ap_regex_t *reg);
1681 * After performing a successful regex match, you may use this function to
1682 * perform a series of string substitutions based on subexpressions that were
1683 * matched during the call to ap_regexec
1684 * @param p The pool to allocate from
1685 * @param input An arbitrary string containing $1 through $9. These are
1686 * replaced with the corresponding matched sub-expressions
1687 * @param source The string that was originally matched to the regex
1688 * @param nmatch the nmatch returned from ap_pregex
1689 * @param pmatch the pmatch array returned from ap_pregex
1691 AP_DECLARE(char *) ap_pregsub(apr_pool_t *p, const char *input, const char *source,
1692 size_t nmatch, ap_regmatch_t pmatch[]);
1695 * We want to downcase the type/subtype for comparison purposes
1696 * but nothing else because ;parameter=foo values are case sensitive.
1697 * @param s The content-type to convert to lowercase
1699 AP_DECLARE(void) ap_content_type_tolower(char *s);
1702 * convert a string to all lowercase
1703 * @param s The string to convert to lowercase
1705 AP_DECLARE(void) ap_str_tolower(char *s);
1708 * Search a string from left to right for the first occurrence of a
1709 * specific character
1710 * @param str The string to search
1711 * @param c The character to search for
1712 * @return The index of the first occurrence of c in str
1714 AP_DECLARE(int) ap_ind(const char *str, char c); /* Sigh... */
1717 * Search a string from right to left for the first occurrence of a
1718 * specific character
1719 * @param str The string to search
1720 * @param c The character to search for
1721 * @return The index of the first occurrence of c in str
1723 AP_DECLARE(int) ap_rind(const char *str, char c);
1726 * Given a string, replace any bare " with \" .
1727 * @param p The pool to allocate memory from
1728 * @param instring The string to search for "
1729 * @return A copy of the string with escaped quotes
1731 AP_DECLARE(char *) ap_escape_quotes(apr_pool_t *p, const char *instring);
1734 * Given a string, append the PID deliminated by delim.
1735 * Usually used to create a pid-appended filepath name
1736 * (eg: /a/b/foo -> /a/b/foo.6726). A function, and not
1737 * a macro, to avoid unistd.h dependency
1738 * @param p The pool to allocate memory from
1739 * @param string The string to append the PID to
1740 * @param delim The string to use to deliminate the string from the PID
1741 * @return A copy of the string with the PID appended
1743 AP_DECLARE(char *) ap_append_pid(apr_pool_t *p, const char *string,
1747 * Parse a given timeout parameter string into an apr_interval_time_t value.
1748 * The unit of the time interval is given as postfix string to the numeric
1749 * string. Currently the following units are understood:
1756 * If no unit is contained in the given timeout parameter the default_time_unit
1757 * will be used instead.
1758 * @param timeout_parameter The string containing the timeout parameter.
1759 * @param timeout The timeout value to be returned.
1760 * @param default_time_unit The default time unit to use if none is specified
1761 * in timeout_parameter.
1762 * @return Status value indicating whether the parsing was successful or not.
1764 AP_DECLARE(apr_status_t) ap_timeout_parameter_parse(
1765 const char *timeout_parameter,
1766 apr_interval_time_t *timeout,
1767 const char *default_time_unit);
1769 /* Misc system hackery */
1771 * Given the name of an object in the file system determine if it is a directory
1772 * @param p The pool to allocate from
1773 * @param name The name of the object to check
1774 * @return 1 if it is a directory, 0 otherwise
1776 AP_DECLARE(int) ap_is_rdirectory(apr_pool_t *p, const char *name);
1779 * Given the name of an object in the file system determine if it is a directory - this version is symlink aware
1780 * @param p The pool to allocate from
1781 * @param name The name of the object to check
1782 * @return 1 if it is a directory, 0 otherwise
1784 AP_DECLARE(int) ap_is_directory(apr_pool_t *p, const char *name);
1787 extern int os_init_job_environment(server_rec *s, const char *user_name, int one_process);
1788 #endif /* _OSD_POSIX */
1791 * Determine the local host name for the current machine
1792 * @param p The pool to allocate from
1793 * @return A copy of the local host name
1795 char *ap_get_local_host(apr_pool_t *p);
1798 * Log an assertion to the error log
1799 * @param szExp The assertion that failed
1800 * @param szFile The file the assertion is in
1801 * @param nLine The line the assertion is defined on
1803 AP_DECLARE(void) ap_log_assert(const char *szExp, const char *szFile, int nLine)
1804 __attribute__((noreturn));
1807 * @internal Internal Assert function
1809 #define ap_assert(exp) ((exp) ? (void)0 : ap_log_assert(#exp,__FILE__,__LINE__))
1812 * Redefine assert() to something more useful for an Apache...
1814 * Use ap_assert() if the condition should always be checked.
1815 * Use AP_DEBUG_ASSERT() if the condition should only be checked when AP_DEBUG
1819 #define AP_DEBUG_ASSERT(exp) ap_assert(exp)
1821 #define AP_DEBUG_ASSERT(exp) ((void)0)
1825 * @defgroup stopsignal Flags which indicate places where the sever should stop for debugging.
1827 * A set of flags which indicate places where the server should raise(SIGSTOP).
1828 * This is useful for debugging, because you can then attach to that process
1829 * with gdb and continue. This is important in cases where one_process
1830 * debugging isn't possible.
1832 /** stop on a Detach */
1833 #define SIGSTOP_DETACH 1
1834 /** stop making a child process */
1835 #define SIGSTOP_MAKE_CHILD 2
1836 /** stop spawning a child process */
1837 #define SIGSTOP_SPAWN_CHILD 4
1838 /** stop spawning a child process with a piped log */
1839 #define SIGSTOP_PIPED_LOG_SPAWN 8
1840 /** stop spawning a CGI child process */
1841 #define SIGSTOP_CGI_CHILD 16
1843 /** Macro to get GDB started */
1844 #ifdef DEBUG_SIGSTOP
1845 extern int raise_sigstop_flags;
1846 #define RAISE_SIGSTOP(x) do { \
1847 if (raise_sigstop_flags & SIGSTOP_##x) raise(SIGSTOP);\
1850 #define RAISE_SIGSTOP(x)
1854 * Get HTML describing the address and (optionally) admin of the server.
1855 * @param prefix Text which is prepended to the return value
1856 * @param r The request_rec
1857 * @return HTML describing the server, allocated in @a r's pool.
1859 AP_DECLARE(const char *) ap_psignature(const char *prefix, request_rec *r);
1861 /** strtoul does not exist on sunos4. */
1865 #define strtoul strtoul_is_not_a_portable_function_use_strtol_instead
1867 /* The C library has functions that allow const to be silently dropped ...
1868 these macros detect the drop in maintainer mode, but use the native
1869 methods for normal builds
1871 Note that on some platforms (e.g., AIX with gcc, Solaris with gcc), string.h needs
1872 to be included before the macros are defined or compilation will fail.
1876 AP_DECLARE(char *) ap_strchr(char *s, int c);
1877 AP_DECLARE(const char *) ap_strchr_c(const char *s, int c);
1878 AP_DECLARE(char *) ap_strrchr(char *s, int c);
1879 AP_DECLARE(const char *) ap_strrchr_c(const char *s, int c);
1880 AP_DECLARE(char *) ap_strstr(char *s, const char *c);
1881 AP_DECLARE(const char *) ap_strstr_c(const char *s, const char *c);
1886 # define strchr(s, c) ap_strchr(s,c)
1888 # define strrchr(s, c) ap_strrchr(s,c)
1890 # define strstr(s, c) ap_strstr(s,c)
1894 /** use this instead of strchr */
1895 # define ap_strchr(s, c) strchr(s, c)
1896 /** use this instead of strchr */
1897 # define ap_strchr_c(s, c) strchr(s, c)
1898 /** use this instead of strrchr */
1899 # define ap_strrchr(s, c) strrchr(s, c)
1900 /** use this instead of strrchr */
1901 # define ap_strrchr_c(s, c) strrchr(s, c)
1902 /** use this instead of strrstr*/
1903 # define ap_strstr(s, c) strstr(s, c)
1904 /** use this instead of strrstr*/
1905 # define ap_strstr_c(s, c) strstr(s, c)
1909 #define AP_NORESTART APR_OS_START_USEERR + 1
1915 #endif /* !APACHE_HTTPD_H */
1917 /** @} //APACHE Daemon */
1918 /** @} //APACHE Core */
1919 /** @} //APACHE super group */