* NEWS, src/usermod.c: Accept options in any order (username not

[shadow] / NEWS

$Id$

shadow-4.1.4.2 -> shadow-4.1.5                                  UNRELEASED

- general
  * report usage error to stderr, but report usage help to stdout (and return
    zero) when explicitly requested (e.g. with --help).
  * initial support for tcb (http://openwall.com/tcb/) for useradd,
    userdel, usermod, chage, pwck, vipw.
  * Added support for ACLs and Extended Attributes in useradd and usermod.
    Support shall be enabled with the new --with-acl or --with-attr
    configure options.

-chpasswd
  * PAM enabled versions: restore the -e option to allow restoring
    passwords without knowing those passwords. Restore together the -m
    and -c options. (These options were removed in shadow-4.1.4 on PAM
    enabled versions)
- faillog
  * The -l, -m, -r, -t options only act on the existing users, unless -a is
    specified.
- groupmod
  * Fixed groupmod when configured with --enable-account-tools-setuid.
-login
  * Fixed limits support (non PAM enabled versions only)
  * Added support for infinite limits and group based limits (non PAM
    enabled versions only)
- su
  * Document the su exit values.
  * When su receives a signal, wait for the child to terminate (after
    sending a SIGTERM), and kill it only if it did not terminate by itself.
    No delay will be enforced if the child cooperates.
  * Default ENV_SUPATH is /sbin:/bin:/usr/sbin:/usr/bin
- newgrp, sg, groupmems
  * Fix parsing of gshadow entries.
- useradd
  * If the skeleton directory contained hardlinked files, copies of the
    hardlink were removed from the skeleton directory.
- usermod
  * Accept options in any order (username not necessarily at the end)

*** translation
  * Updated Czech translation.
  * Updated Vietnamese translation.
  * Updated Kazakh translation.

shadow-4.1.4.1 -> shadow-4.1.4.2                                        2009-07-24

- general
  * Improved support for large groups (impacts most user/group management
    tools).

- addition of system users or groups
  * Speed improvement. This should be noticeable in case of LDAP configured
    systems. This should impact useradd, groupadd, and newusers
  * Since system accounts are allocated from SYS_?ID_MIN to SYS_?ID_MAX in
    reverse order, accounts are packed close to SYS_?ID_MAX if SYS_?ID_MIN
    is already used but there are still dome gaps.

- login
  * Add support for shells being a shell script without a shebang.
- su
  * Preserve the DISPLAY and XAUTHORITY environment variables. This was
    only the case in the non PAM enabled versions.
  * Add support for shells being a shell script without a shebang.

*** translation
  * The Finnish translation of passwd(1) was outdated and is no more
    distributed.

shadow-4.1.4 -> shadow-4.1.4.1                                          2009-05-22

- login
  * Fix failures with empty usernames on non PAM versions.
  * Fix CONSOLE (securetty) support on non PAM versions.
- newgrp
  * Return the exit status of the child.
- userdel
  * On Linux, do not check if an user is logged in with utmp, but check if
    the user is running some processes.
  * If not on Linux, continue to search for an utmp record, but make sure
    the process recorded in the utmp entry is still running.
  * Report failures to remove the user's mailbox
  * When USERGROUPS_ENAB is enabled, remove the user's group when the
    user was the only member.
  * Do not fail when -r is used and the home directory does not exist.
- usermod
  * Check if the user is busy when the user's UID, name or home directory
    is changed.

shadow-4.1.3.1 -> shadow-4.1.4                                          2009-05-10

- packaging
  * Enable --enable-account-tools-setuid by default for PAM builds.
  * Add configure option --enable-utmpx, disabled by default to mimic
    the previous behavior on Linux (where utmp and utmpx are identical).
  * Fix build failure on non-PAM systems when --without-pam is not
    specified.

- chpasswd
  * Change the passwords using PAM. This permits to define the password
    policy in a central place. The -c/--crypt-method, -e/--encrypted,
    -m/--md5 and -s/--sha-rounds options are no more supported on PAM
    enabled systems.
- grpck
  * Warn if a group has an entry in group and gshadow, and the password
    field in group is not 'x'.
- login
  * Do not trust the current utmp entry's ut_line to set PAM_TTY. This could
    lead to DOS attacks.
  * (PAM) Even if the user was already authenticated (-f flag), ask the
    user to update his authentication token if needed.
- lastlog
  * Fix regression causing empty reports.
- newusers
  * Change the passwords using PAM. This permits to define the password
    policy in a central place. The -c/--crypt-method and -s/--sha-rounds
    options are no more supported on PAM enabled systems.
- pwck
  * Warn if an user has an entry in passwd and shadow, and the password
    field in passwd is not 'x'.

*** translation
 - Updated Czech translation
 - Updated French translation
 - Updated German translation
 - Updated Japanese translation
 - Updated Korean translation
 - Updated Portuguese translation
 - Updated Russian translation

shadow-4.1.3 -> shadow-4.1.3.1                                          2009-04-15

*** security:
- Due to bad parsing of octal permissions, the permissions on tty (login)
  but also UMASK were set wrongly (and weirdly). Only shadow-4.1.3 was
  affected.

*** general
- login
  * Fix regression when no user is specified on the command line.
- userdel
  * Fixed SE Linux support
- vipw
  * SE Linux: Set the default context to the context of the file being
    edited. This ensures that the backup file inherit from the file's
    context.

*** translation
 - Updated Norwegian Bokmål translation

shadow-4.1.2.2 -> shadow-4.1.3                                          2009-04-12

*** general:
- packaging
  * Fixed support for OpenPAM.
  * Fixed support for uclibc.
  * Added configure --enable-account-tools-setuid (default) /
    --disable-account-tools-setuid options. This permits to disable the
    PAM authentication of the caller for chage, chgpasswd, chpasswd,
    groupadd, groupdel, groupmod, newusers, useradd, userdel, and usermod.
    This authentication is not necessary when these tools are not
    installed setuid root.
  * Added configure --with-group-name-max-length (default) /
    --without-group-name-max-length options. This permits to configure the maximum length allowed for group names:
      <no option> -> default of 16 (like today)
      --with-group-name-max-length -> default of 16
      --without-group-name-max-length -> no max length
      --with-group-name-max-length=n > max is set to n
    No sanity checking is performed on n so people could do
    something neat like --with-group-name-max-length=MAX_INT
- addition of users or groups
  * Speed improvement in case UID_MAX/SYS_UID_MAX/GID_MAX/SYS_GID_MAX is
    used for an user/group. This should be noticeable in case of LDAP
    configured systems. This should impact useradd, groupadd, and newusers
- error handling improvement
  * Make sure errors and incomplete changes are reported to syslog and
    audit in case of unexpected failures.
  * Report system inconsistencies to syslog and audit.
  * Only report success to syslog and audit if the changes are really
    performed in the system databases.
    This is still not complete.
- /etc/login.defs
  * New CREATE_HOME variable to tell useradd to create a home directory by
    default.
- Translations
  * New Kazakh translation.
  * Spanish manpages are no more distributed. They are outdated. Please
    contact pkg-shadow-devel@lists.alioth.debian.org if you wish to
    provide updates.

- faillog
  * Accept users specified as a numerical UID, or ranges of users (-user,
    user-, user1-user2).
  * -l, -m, and -r now apply not only to existing users, but to all the
    specified UIDs.
  * Options can be specified in any order.
- gpasswd
  * Added support for long options --add (-a), --delete (-d),
    --remove-password (-r), --restrict (-R), --administrators (-A), and
    --members (-M).
  * Added support for usernames with arbitrary length.
  * audit logging improvements.
  * error handling improvement (see above).
  * Log permission denied to syslog and audit.
- groupadd
  * audit logging improvements.
  * error handling improvement (see above).
  * Speedup (see "addition of users or groups" above).
  * do not create groups with GID set to (gid_t)-1.
  * Allocate system group GIDs in reverse order. This could be useful
    later to increase the static IDs range.
- groupdel
  * audit logging improvements.
  * error handling improvement (see above).
- groupmems
  * Check if user exist before they are added to groups.
  * Avoid segfault in case the specified group does not exist in /etc/group.
  * Everybody is allowed to list the users of a group.
  * /etc/group is open readonly when one just wants to list the users of a
    group.
  * Added syslog support.
  * Use the groupmems PAM service name instead of groupmod.
  * Fix segmentation faults when adding or removing users from a group.
  * Added support for shadow groups.
  * Added support long options --add (-a), --delete (-d), --purge (-p),
    --list (-l), --group (-g).
- groupmod
  * audit logging improvements.
  * error handling improvement (see above).
  * do not create groups with GID set to (gid_t)-1.
- grpck
  * warn for groups with GID set to (gid_t)-1.
- login
  * Restore the echoctl, echoke, onclr flags to the terminal termio flags.
    Reset echoprt, noflsh, tostop. This behavior seems to have change by
    mistake in earlier releases (4.0.8, for no obvious reason).
- newusers
  * Implement the -r, --system option.
  * Speedup (see "addition of users or groups" above).
  * do not create users with UID set to (gid_t)-1.
  * do not create groups with GID set to (gid_t)-1.
  * Allocate system account UIDs/GIDs in reverse order. This could be useful
    later to increase the static IDs range.
- passwd
  * For compatibility with other passwd version, the --lock an --unlock
    options do not lock or unlock the user account anymore.  They only
    lock or unlock the user's password.
- pwck
  * warn for users with UID set to (uid_t)-1.
- su
  * Preserve COLORTERM in addition to TERM when su is called with the -l
    option.
- useradd
  * audit logging improvements.
  * Speedup (see "addition of users or groups" above).
  * See CREATE_HOME above.
  * New -M/--no-create-home option to disable CREATE_HOME.
  * do not create users with UID set to (gid_t)-1.
  * Added -Z option to map SELinux user for user's login.
  * Allocate system user UIDs in reverse order. This could be useful
    later to increase the static IDs range.
- userdel
  * audit logging improvements.
  * Do not fail if the removed user is not in the shadow database.
  * When the user's group shall be removed, do not fail if this group is
    not in the gshadow file.
  * Delete the SELinux user mapping for user's login.
- usermod
  * Allow adding LDAP users (or any user not present in the local passwd
    file) to local groups
  * do not create users with UID set to (gid_t)-1.
  * Added -Z option to map SELinux user for user's login.

shadow-4.1.2.1 -> shadow-4.1.2.2                                        23-11-2008

*** security
- Fix a race condition in login that could lead to gaining ownership or
  changing mode of arbitrary files.
- Fix a possible login DOS, which could be caused by injecting forged
  entries in utmp.

shadow-4.1.2 -> shadow-4.1.2.1                                          26-06-2008

*** security
- Fix an "audit log injection" vulnerability in login.
  This vulnerability makes it easier for attackers to hide activities by
  modifying portions of log events, e.g. by appending an addr= statement
  to the login name.

shadow-4.1.1 -> shadow-4.1.2                                            25-05-2008

*** security:
- generation of SHA encrypted passwords (chpasswd, gpasswd, newusers,
  chgpasswd; and also passwd if configured without PAM support).
  The number of rounds and number of salt bytes was fixed to their lower
  allowed values (resp. configurable and 8), hence voiding some of the
  advantages of this encryption method. Dictionary attacks with
  precomputed tables were easier than expected, but still harder than with
  the MD5 (or DES) methods.

*** general:
- packaging
  * Distribute the chfn, chsh, and userdel PAM configuration file.
  * Fix the detection of the audit, pam, and selinux library and header
    file; and fail if the feature is requested but not present on the
    system.
  * Fix build failure when configured with audit support.
- chfn
  * Allow non-US-ASCII characters in the GECOS fields ("name", "room
    number", and "other info" fields).
- login
  * Do not fail if a shell option, specified after --, has more than 2
    letters.
- su
  * If the SULOG_FILE does not exist when an su session is logged, make
    sure the file is created with group root, instead of using the group
    of the caller.
- vipw
  * Resume properly after ^Z.

*** documentation:
- Document the -r, --system option in the useradd, groupadd, and newusers
  manpages.
- Document the -c, --crypt-method and -s, --sha-rounds options in the
  newusers manpage.
- Document the -k, --skel option in the useradd manpage.
- Tag the section which require --enable-shadowgrp or --with-sha-crypt
  accordingly.

shadow-4.1.0 -> shadow-4.1.1                                            02-04-2008

*** general:
- security
  * Do not seed the random number generator each time, and use the time in
    microseconds to avoid having the same salt for different passwords
    generated in the same second.
- packaging
  * Do not install the shadow library per default.
- general
  * Do not translate the messages sent to syslog. This avoids logging
    PAM error messages in the users's locale.
- etc/login.defs
  * Set GID_MIN to the same value as UID_MIN by default (1000).
  * Added variables SYS_UID_MIN (100), SYS_UID_MAX (999), SYS_GID_MIN (100),
    SYS_GID_MAX (999) for system accounts.
- etc/useradd
  * /etc/default/useradd now defines HOME as /home to match FHS.
- chage
  * Fix bug which forbid to set the aging information of an account with a
    passwd entry, but no shadow entry.
- faillog
  * faillog -r now only reset the entries of existing users. This makes
    faillog faster.
- gpasswd
  * Fix failures when the gshadow file is not present.
  * When a password is moved to the gshadow file, use "x" instead of "x"
    to indicate that the password is shadowed (consistency with grpconv).
  * Make sure the group and gshadow files are unlocked on exit.
- groupadd
  * New option -p/--password to specify an encrypted password.
  * New option -r, --system for system accounts.
- groupdel
  * Do not fail if the group does not exist in the gshadow file.
  * Do not rewrite the group or gshadow file in case of error.
  * Make sure the group and gshadow files are unlocked on exit.
  * Fail if the system is not configured to support split groups and
    different group entries have the name of the group to be deleted.
- groupmems
  * Fix buffer overflow when adding an user to a group. Thanks to Peter Vrabec.
- groupmod
  * New option -p/--password to specify an encrypted password.
  * Make sure the group and gshadow files are unlocked on exit.
  * When the GID of a group is changed, update also the GID of the passwd
    entries of the users whose primary group is the group being modified.
- grpck
  * Fix logging of changes to syslog when a group file is provided,
    without a gshadow file.
- lastlog
  * Accept users specified as a numerical UID, or ranges of users (-user,
    user-, user1-user2).
- login
  * Use PATH and SUPATH to set the PATH environment variable, even when
    support for PAM is enabled.
  * If started as init, start a new session.
- newgrp
  * Fix segfault when an user returns to an unknown GID (either the user
    was deleted during the user's newgrp session or the user's passwd
    entry referenced an invalid group). Add a syslog warning in that case.
  * Use the correct AUDIT_CHGRP_ID event instead of AUDIT_USER_START, when
    changing the user space group ID with newgrp or sg.
- newusers
  * The new users are no more added to the list of members of their groups
    because the membership is already set by their primary group.
  * Added support for gshadow.
  * Avoid using the same salt for different passwords.
  * Fix support for the NONE crypt method.
  * newusers will behave more like useradd regarding the choice of UID or
    GID or regarding the validity of user and group names.
  * New option -r, --system for system accounts.
  * Make sure the passwd, group, shadow, and gshadow files are unlocked on
    exit.
- passwd
  * Make sure that no more than one username argument was provided.
  * Make SE Linux tests more strict, when the real UID is 0 SE Linux
    checks will be performed.
- pwck
  * Fix logging of changes to syslog when a passwd file is provided,
    without a shadow file.
- su
  * su's arguments are now reordered. If needed, use -- to separate su's
    options from the shell's options.
- sulogin
  * If started as init, start a new session.
- useradd
  * New option -l to avoid adding the user to the lastlog and faillog databases.
  * Fix the handling of the --defaults option (it required an argument,
    but should behave as -D)
  * Document the --defaults option, which was already described in the
    useradd's Usage information.
  * New option -r, --system for system accounts.
  * New options -U, --user-group and -N, --no-user-group. These options
    should replace nflg from the previous versions. Please set any -n
    option to deprecated because its meaning differs from one distribution
    to the other.
  * Make sure the passwd, group, shadow, and gshadow files are unlocked on
    exit.
- usermod
  * Keep the access and modification time of files when moving an user's home
    directory.
  * Check that the new fields set with -u, -s, -l, -g, -f, -e, -d, and -c
    differ from the old ones. If a requested new value is equal to the old
    one, no changes will be performed for that field. If no fields are
    changed, usermod will exist successfully with a warning. This avoids
    logging changes to syslog when there are actually no changes.
  * Fix the handling of -a when a user is being renamed (with -l)
- vipw/vigr
  * Recommend editing the shadowed (resp. regular) file if the regular (resp.
    shadowed) file was edited.

shadow-4.0.18.2 -> shadow-4.1.0                                         09-12-2007

*** security:
- chgpasswd
  When compiled with PAM support, it used the chpasswd policy file instead
  of the chgpasswd policy file. If an administrator added some restriction
  to the chgpasswd policy file, they were not taken into account.

*** general:
- Add support for SHA256 and SHA512 encrypt methods (supported by new
  libc).
- useradd: Allow non numerical group identifier to be specified with
  useradd's -g option.
- chgpasswd, chpasswd: Fix chpasswd and chgpasswd stack overflow.
- newgrp: Do not give an indication that the group has no password. Ask
  for the password, as if there were a password.
- The permissions of the suid binaries is now configurable in
  src/Makefile.am. Note that changing the permissions is not recommended.
- newgrp.c: Declare the child and pid variable at the beginning of a block.
  This fixes a compilation issue with gcc 2.95.
- login_nopam: Add support for systems with no innetgr().  On those
  systems, username with an @ will be treated like any other username
  (i.e. lookup in the local database for an user with an @). Thanks to
  Mike Frysinger for the patch.
- Add support for uClibc with no l64a().
- userdel, usermod: Fix infinite loop caused by erroneous group file
  containing two entries with the same name. (The fix strategy differs
  from 
  (https://bugzilla.redhat.com/show_bug.cgi?id=240915)
- userdel: Abort if an error is detected while updating the passwd or group
  databases. The passwd or group files will not be written.
- usermod: Update the group database before flushing the nscd caches.
- usermod: Make sure the group modifications will be allowed before
  writing the passwd files.
- Flush the nscd tables using nscd -i instead of the private glibc socket.
- usermod: Make usermod options independent of the argument order.
- newgrp: Do not request a password when a user uses newgrp to switch to
  her primary group.
- passwd: -l/-u options: edit the shadow account expiry field *in
  addition* to editing the password field.
- pwck: Remove the SHADOWPWD preprocessor check. Some check for /etc/shadow
  were always missing.
- su: Avoid terminating the PAM library in the forked child. This is done
  later in the parent after closing the PAM session.
- userdel: Fix the homedir prefix checking.
- passwd, usermod: Refuse to unlock an account when it would result in a
  passwordless account.
- Full review of the usage of getpwnam(), getpwuid(), getgrnam(),
  getgrgid(), and getspnam(). There should be no functional changes.
- gpasswd: Only read information from the local file group database. It
  writes the changes in /etc/group and/or /etc/gshadow, but used to read
  information from getgrnam (hence possibly from another group database).
- New login.defs variable: MAX_MEMBERS_PER_GROUP. It should provide a
  better support for split groups. Be careful when using this variable:
  not all tools support well split groups (in or out of the shadow
  tool suite). It fixes gpasswd and chgpasswd when split groups are used.
- Use MD5_CRYPT_ENAB, ENCRYPT_METHOD, SHA_CRYPT_MIN_ROUNDS, and
  SHA_CRYPT_MAX_ROUNDS to define the default encryption algorithm for the
  passwords.
- chpaswd, chgpasswd, newusers: New options -c/--crypt-method and
  -s/--sha-rounds to supersede the system default encryption algorithm.
- chpaswd, chgpasswd, newusers: DES is no more the default algorithm. They
  will respect the system default configured in /etc/login.defs

*** documentation:
- Generate the translated manpages from PO at build time.
- The generated manpages will change depending on the configure options.
  If you use different options than the one used for the distributed
  archive, you should re-generate the manpages.
- login.defs should now describe all the variables.
- The tools' documentation details the login.defs variables they use.

shadow-4.0.18.1 -> shadow-4.0.18.2                                      28-10-2007

*** general:
- usermod: fixed handle -a option (by Benno Schulenberg
  <bensberg@justemail.net>),
- useradd: improved auditing support
  (https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=211659),
- groupadd, groupdel, groupmod, useradd, userdel, usermod: flush nscd cashes
  after close /etc/{group,passwd} files,
- su: If compiled without PAM support, enforce the limits from /etc/limits
  when one of the -, -l, or --login options is set, even if called by root.
- limits: Support for 2 new resource limits: max nice value, and max real
  time priority. The resource limits are not used when compiled with PAM.
*** documentation:
- updated translations: fi, ja, nl, tl, zh_CN.
- groupadd.8, groupmod.8, login.1, useradd.8, userdel.8, usermod.8: grammar
  mistakes and other corrections (by Schulenberg <bensberg@justemail.net>),

shadow-4.0.18 -> shadow-4.0.18.1                                        03-08-2006

*** general:
- groupmems: fixed compilation when PAM is disabled
  (by Johannes Winkelmann <jw@smts.ch>),
- fixed missing man pages in dist tar ball necessary on build when
  PAM is disabled.

shadow-4.0.17 -> shadow-4.0.18                                          01-08-2006

*** general:
- su: fixed set enviroment too early when using PAM, so move it to !USE_PAM
  (patch submitted by Mike Frysinger <vapier@gentoo.org>),
- groupadd, groupmod, useradd, usermod: fixed UID/GID overflow (fixed
  http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=198920)
- passwd, useradd, usermod: fixed inactive/mindays/warndays/maxdays overflow
  (simillar to RH#198920),
- groupmems: rewrited for use PAM and getopt_long() and now it is enabled
  for build and install (patch by George Kraft <gk4@swbell.net>),
- S/Key: removed assign getpass() to libshadow_getpass() on autoconf level
  (patch by Ulrich Mueller <ulm@kph.uni-mainz.de>; http://bugs.gentoo.org/139966),
- usermod: back to previous -a option semantics and clarify -a behavior
  on documentation level (by Greg Schafer <gschafer@zip.com.au>),
- chsh, groupmod: rewrited for use getopt_long().
- updated translations: ca, cs, da, eu, fr, gl, hu, ko, pl, pt, ru, sv, tr, uk, vi.
*** documentation:
- fr and ru man pages are up to date,
- partially translated sv man pages set added
  (by Daniel Nylander <info@danielnylander.se>),
- pl chage(1), chsh(1), groupmod(8): translation finished.

shadow-4.0.16 -> shadow-4.0.17                                          10-07-2006

*** general:
- userdel, usermod: fixed segfault on remove home directory when it can't
  be removed; for example when it is /dev/null (fixed http://bugs.gentoo.org/139148),
- improved SELinux detection on autoconf level (based on patch by
  Dan Yefimov <dan@D00M.lightwave.net.ru>),
- removed using private implementation getpass() libc function
  (now getpass() is used also when S/KEY support is enabled),
- move nologin do $(sbindir),
- useradd: fixed mail spool file creation (bug cached by Frans Pop
  <elendil@planet.nl>;
  fixed http://bugs.debian.org/374705),
- updated translations: cs, da, de, ko, nb, nl, pt, ro, ru, sk, sv, vi,
- new translations: dz, km, ne.
*** documentation:
- ru man pages up to date,
- lastlog(8): updated pl translation,
- faillog(5): added missing information about fail_locktime element of
  faillog struct (by Thorsten Kukuk <kukuk@suse.de>),
- updated translations: eu, fr, pl.
- reverted using docbook.sourceforge.net in XSL url.

shadow-4.0.15 -> shadow-4.0.16                                          05-06-2006

*** general:
- userdel: better fix for old CERT VU#312962 (which was fixed in shadow 4.0.8):
  fixed forgoten checking of the return value from fchown() before
  proceeding with the fchmod() (based on Owl patch prepared by
  Rafal Wojtczuk <nergal@owl.openwall.com>),
- userdel: use login.defs::MAIL_DIR instead hardcoded /var/mail in created
  mailbox path (based on Owl fixes submited
  by Solar Designer <solar@openwall.com>),
- by default do not use libshadow_getpass() as getpass() replacemement.
  Use libshadow_getpass() only when S/KEY support is enabled.
  Current glibc getpass() handles correctly longer than 8 characters
  passwords and libshadow_getpass() is used only because libc getpass()
  do not handles password prompting with echo enabled,
- move login.defs::MD5_CRYPT_ENAB to non-PAM part,
- userdel: rewrited for use getopt_log(),
- install default/template configuration files:
-- if shadow is configured with use PAM install /etc/pam.d/* files,
-- if shadow do not uses PAM install /etc/{limits,login.acces} files,
-- install /etc/login.defs and /etc/default/useradd files,
- fixed handle relative symlinks too in lib/commonio.c
  (merge patch from Fedora),
- properly notify nscd to flush its cache
  (https://bugzilla.redhat.com/bugzilla/186803),
- useradd, usermod: fixes for verify return values mkdir() and chown()
  on copy files (merge 482_libmisc_copydir_check_return_values Debian
  patch),
- login, su (non-PAM variant): export MAIL only when MAIL_CHECK_ENAB
  is enabled (Mike Frysinger <vapier@gentoo.org>),
- pgck, grpck: warn when the members of a group differ in /etc/groups
  and /etc/gshadow (fixed http://bugs.debian.org/75181),
- su: fixed exit with a status 0 when the invoked command is terminated
  by a signal which was not catched
  (fixed by Eero Häkkinen <eero17@bigfoot.com>),
- login: cancel login timeout after authentication so that patient people
  timing out on network directory services can log in with local
  accounts (http://bugs.debian.org/107148),
- chgpasswd: fixes for build correctly with --disable-shadowgrp
  (patch by Johannes Winkelmann <jw@tks6.net>).
- updated translations: cs, da, es, eu, fi, fr, gl, hu, id, pt, ru, sk, sv, vi.
- new translations: hu.
*** documentation:
- new cs man pages: groupmems(8), groupmod(8), grpck(8), gshadow(5)
  (by Miroslav Kure <kurem@upcase.inf.upol.cz>),
- regenerate roff man pages using docbook-style-xsl-1.70.1,
- bunch of cleanups in chfn(1), faillog(8), gpasswd(1), groupadd(8),
  groupmems(8), limits(5), login(1), login.defs(5), newgrp(1), passwd(1),
  passwd(5) and su(1) (by Yuri Kozlov <kozlov.y@gmail.com>),
- update pl vipw(8) man page,
- added chgpasswd(8) ru man page,
- updated ru login.defs(5), passwd(1), userdel(8), usermod(8) man pages,
- pw_auth(3) man page removed (outdated),
- install limits(5), login.access(5) and porttime(5) man pages only when
  shadow is builded with PAM support disabled,
- passwd(1): better document how password strength is checked
  (fixed http://bugs.debian.org/115380),
- usermod(8): added missing -a option description
  (by Christian Perrier <bubulle@debian.org>),
- hu chsh(1), lugin(1), newgrp(1): fixed typos
  (by Koblinger Egmont <egmont@uhulinux.hu>),
- login.defs(5): remove information about CREATE_HOME (patch by
  Mike Frysinger <vapier@gentoo.org>),
- chgpasswd(8): new man page.

shadow-4.0.14 -> shadow-4.0.15                                          13-03-2006

*** general:
- do not install translated man pages if shadow is configured with
  --disable-nls
  (based patch submited by Mike Frysinger <vapier@gentoo.org>),
- added fixes for detect BSD's S/Key with updated the skeychallenge()
  function for take a fourth argument in case BSD version (patch submited by
  Mike Frysinger <vapier@gentoo.org>),
- login: default UMASK if not specified in login.defs is 022 (pointed by
  Peter Vrabec <pvrabec@redhat.com>),
- chgpasswd: new tool (by Jonas Meurer <mejo@debian.org>),
- lastlog: print the usage and exit if an additional argument is profided to
  lastlog (merge 488_laslog_verify_arguments Debian patch),
- login, newgrp, nologin, su: do not link with libselinux (merge
  490_link_selinux_only_when_needed Debian patch),
- chage, chfn, chsh, passwd: fixed confusing error message if /proc is not
  mounted (http://bugs.debian.org/352494 patch Nicolas François
  <nicolas.francois@centraliens.net>),
- login (merge 433_login_more_LOG_UNKFAIL_ENAB Debian patch):
  - TOO MANY LOGIN... logged if PAM_MAXTRIES or failcount >= retries (was
    onl test PAM_MAXTRIES),
  - print to stderr (in addition to syslog) in case of maximum number of
    tries exceeded,
  - always prints the number of tries in the syslog entry.
  - add special handling for PAM_ABORT
  - add an entry to failog, as when USE_PAM is not defined. (#53164)
  - changed pam_end to PAM_END. This is certainly was a mistake.  PAM_END is
    pam_close_seesion + pam_end. Here, the session is still not open, we
    don't have to close it.
  - a HAVE_PAM_FAIL_DELAY is missing,
- su: fixed pam session support (patch from Topi Miettinen; fixed #57526,
  #55873, 57532 Debian bugs),
- userdel: user's group is already removed by update_groups().
  remove_group() is not needed (bug introduced in 4.0.14 on merge FC fixes).
  Fixed by Nicolas François <nicolas.francois@centraliens.net>,
- useradd: allways remove group and gshadow databases lock, Fixed by Nicolas
  François <nicolas.francois@centraliens.net>
  (http://bugs.debian.org/348250)
- auditing fixes:
  - corrected prototypes in lib/prototypes.h (thre is no audit_help_log();
    added audit_logger() prototype),
  - useradd: fixed excess audit_logger() argument,
- chage: added missing \n on display password status if password must be
  chaged,
- useradd: fixed allow non-unique UID (http://bugs.debian.org/351281),
- variouse code cleanups for make possible compilation of shadow with -Wall
  -Werror (by Alexander Gattin <xrgtn@yandex.ru>),
- su: move exit() outside libmisc/shell.c::shell() for handle shell() errors
  on higher level (now is better visable where some programs exit with 126
  and 127 exit codes); added new shell() parameter (char *const envp[])
  which allow fix preserving enviloment in su on using -p, (patch by
  Alexander Gattin <xrgtn@yandex.ru>),
- su: added handle -c,--command option for GNU su compliance (merge
  437_su_-c_option Debian patch),
- login: added translate login prompt string (suggested by Evgeniy
  Dushistov),
- updated translations: ca, cs, da, el, es, eu, gl, fi, fr, it, nb, nl, pt,
  pt_BR, ro, ru, sk, sv, tl, vi, zh_CN,
- new translations: gl.
*** documentation:
- ru man pages: added new nologin(8) and updated all other man pages (by
  Yuri Kozlov <kozlov.y@gmail.com>),
- chsh(1), su(1): update fi translations generated from XML files
  (Tommi Vainikainen <thv+debian@iki.fi>),
- expiry(1), faillog(5), faillog(8), gpasswd(1), groupadd(8), groupdel(8),
  logoutd(8), nologin(8), vipw(8): added new cs man pages, (by Miroslav Kure
  <kurem@upcase.inf.upol.cz>)
- login.defs(5): default UMASK if not specified in login.defs is 022
  (pointed by Peter Vrabec <pvrabec@redhat.com>),
- useradd(8): better document that -d will not add the user's home directory
  if it does not already exist (http://bugs.debian.org/154996),
- nologin(8) man pages added (merge 478_nologin.8.xml Debian patch).

shadow-4.0.13 -> shadow-4.0.14                                          03-01-2006

*** general:
- fixes in handling login.defs: $MAIL_FILE is used in userdel and usermod,
  $MD5_CRYPT_ENAB is used by crypt_make_salt, which is used by chpasswd,
  gpasswd and newusers.
  Both variables moved to PAM not dependent (447_missing_login.defs_variables
  Debian patch),
- chage: fix chage display when the last change field is set to 0.
  This is consistent with PAM (merge 427_chage_expiry_0 Debian patch),
- su: if an password is expired, su should propose to change this password
  (fixed http://bugs.debian.org/321384),
- login: added auditing support (based on Fedora patch for login from util-linux),
- useradd: merge PUG fixes from RedHat patch,
- nologin: new program,
- vipw: added a "quiet" mode (http://bugs.debian.org/190252),
- newgrp: added auditing support (by Steve Grubb <sgrubb@redhat.com>),
- switch over to a new logging function (by Steve Grubb <sgrubb@redhat.com>),
- userdel: fix incorrect audit record in userdel
  (https://bugzilla.redhat.com/bugzilla/174392),
- userdel: remove the user's group unless it is not really a user-private group
  for better PUG support (based on FC patch),
- userdel: make the -f option force the removal of the user's group (even if it
  is the primary group of another user)
  (merge 453_userdel_-f_removes_group Debian patch),
- usermod: rewrited for use getopt_long() (Christian Perrier <bubulle@kheops.frmug.org>),
- grpck: fixed segmentation fault on using -s when /etc/gshadow is empty (fix by
  Tomasz Lemiech <szpajder@staszic.waw.pl>),
- passwd: remove handle -f, -g and -s options.
- added handle -s/--shell, -m/-p/preserve-environment options like GNU su
  (based on patches from Debian submited by
  Nicolas François <nicolas.francois@centraliens.net>)
- su: export $USER and $SHELL as well as $HOME (http://bugs.debian.org/11003 and
  http://bugs.debian.org/11189),
- su, vipw: rewrited for use getopt_long(),
- su: log successful/failed through syslog (http://bugs.debian.org/190215),
- updated translations: ca, cs, da, eu, fi, fr, it, pl, pt, ru, sv, tl, vi,
- new translations: gl.
*** documentation:
- added es, ko vigr(8) and vipw(8), hu lastlog(8), ko vipw(8), zh_CN su(1),
  zh_TW chpasswd(8) and su(1),
- added tr man pages: chage(1), chfn(1), groupadd(8), groupdel(8), groupmod(8),
  login(1), passwd(1), passwd(5), shadow(5), su(1) useradd(8), userdel(8),
  usermod(8),
- passwd5): added es, hu, pt_BR, zh_CN zh_TW translations,
- added full set (up to date) fr man pages
  (by Nicolas François <nicolas.francois@centraliens.net>),
- pwck(1): document -q option,
- WARNING: all translated man pages are now in UFT-8,
- added full set of ru man pages (by Yuri Kozlov <kozlov.y@gmail.com>),
- login(1): better explain the respective roles of login, init and getty with regards
  to the utmp file (merge 440_manpages-login.1 Debian patch),
- login(1): document how to initiate a trusted path on linux
  (http://bugs.debian.org/305600),
- userdel(8): document the -f option; document the group removal behavior (merge
  455_userdel.8.xml Debian patch),
- groupadd(8), useradd(8): document that useradd/groupadd refuse adding entries already in an
  external database (http://bugs.debian.org/282184),
- updated it groupdel(8), passwd(1), pwconv(8), useradd(8), userdel(8), usermod(8) man pages
  (merge 205_it-manpages Debian patch),
- added fi chfn(1), chsh(1), passwd(1), su(1),
- newusers(8): added it translation,
- newgrp(1): added de, es, zh_CN, zh_TW translations.

shadow-4.0.12 -> shadow-4.0.13                                          10-10-2005

*** general:
- chage: removed duplicated pam_start(),
- chfn, chsh: finished PAM support usin pam_start() and co.,
- userdel: userdel should not remove the group which is primary for someone else
  (fix by Nicolas François <nicolas.francois@centraliens.net>
  http://bugs.debian.org/295416),
- login: use "%c" in strftime() output (based on patch from
  http://bugs.debian.org/89902 by Christian Perrier <bubulle@debian.org>),
- fixedlib/commonio.c: don't assume selinux is enabled if is_selinux_enabled()
  returns -1 (merge isSelinuxEnabled FC patch by Jeremy Katz <katzj@redhat.com>),
- login, su (non-PAM case): fixed setup max address space limits (added missing break
  statement in case) spoted by Lasse Collin <lasse.collin@tukaani.org>,
- auditing support added. Patch prepared by Peter Vrabec <pvrabec@redhat.com> basing
  on work by Steve Grubb from http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=159215
  Now auditing support have commands: chage, gpasswd, groupadd, groupdel, groupmod,
  useradd, userdel, usermod.
- chage, chfn, chsh, passwd: change to use new selinux API for
  selinux_check_passwd_access() (patch from Fedora by Dan Walsh <dwalsh@redhat.com>),
- use #ident preprocesor directive istead RCID macro with content similar
  to example described in ident(1) man page (modern compilers like latest GCC
  removes not used functions by global optimization).
  So "ident /usr/bin/passwd" will show again some useable informations
- su: fixed twice copy enviroment which causes auth problems
  (bug was introduced in 4.0.12; fix by Nicolas François <nicolas.francois@centraliens.net>),
- chage: differentiate the different failure causes by the exit value
  This will permit to adduser Debian script to detect if chage failed because the
  system doesn't have shadowed passwords (fix for http://bugs.debian.org/317012),
- merge 010_more-i18ned-messages Debian patch which adds i18n support for few
  more messages (orginaly patch was prepared by Guillem Jover <guillem@debian.org>),
- lastlog: added handle -b option which allow print only lastlog records older than
  specified DAYS (fix by <miles@lubin.us>),
- chpasswd, gpasswd, newusers: fixed libmisc/salt.c for use login.defs::MD5_CRYPT_ENAB
  only if PAM support is disabled (fix by John Gatewood Ham <zappaman@buraphalinux.org>),
- passwd: rewrited for use getopt_long(),
- newgrp: when newgrp process sits between parent and child shells, it should
  propagate STOPs from child to parent and CONTs from parent to child,
  otherwise e.g. bash's "suspend" command won't work
  Fixed Debian http://bugs.debian.org/314727
- updated translations: da, es, fr, pt, ro, ru.
*** documentation:
- chsh(1), groupadd(8), newusers(8), pwconv(8), useradd(8), userdel(8), usermod(8):
  added missing references to /etc/login.defs and login.defs(5)
  (Christian Perrier <bubulle@kheops.frmug.org>),
- passwd(5): rewrited based on work by Greg Wooledge <greg@wooledge.org>
  http://bugs.debian.org/328113
- login(1): added securetty(5) to SEE ALSO section
  (fixed Debian bug http://bugs.debian.org/325773),
- groupadd(8), useradd(8): fix regular expression describing alloved login/group
  names (pointed by Nicolas François <nicolas.francois@centraliens.net>)
  (correct is [a-z_][a-z0-9_-]*[$]),
- groupadd(8), useradd(8): documents in CAVEATS section the limitations shadow
  places on user and group names (fix by Mike Frysinger <vapier@gentoo.org>).
- chage(1), groupadd(8): document -h,--help option.

shadow-4.0.11.1 -> shadow-4.0.12                                        22-08-2005

*** general:
- newgrp, login: remove using login.defs::CLOSE_SESSIONS variable and allways 
  close PAM session,
- fixed configure.in: realy enable shadow group support by default (pointed by 
  Greg Schafer <gschafer@zip.com.au> and Peter Vrabec <pvrabec@redhat.com>),
- login.defs: removed handle QMAIL_DIR variable,
- login: allow regular user to login on read-only root file system (not only for root)
  Patch by Nicolas François <nicolas.francois@centraliens.net>
  Fix for http://bugs.debian.org/52069
- gpasswd, grpck, grpconv, grpuconv: added flushing group nscd cache,
- pwck, pwconv: added flushing passwd nscd cache,
- usermod: fixed handle -p option (patch by Peter Vrabec <pvrabec@redhat.com>),
- chage: use -1 as value for disable password inactivity, expiration date and
  checking an password validation.
  Based on patch by Peter Vrabec <pvrabec@redhat.com> which fixes:
  https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=109499
  https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=137498
  and on 427_chage_expiry_0 Debian patch (fix for http://bugs.debian.org/78961)
- useradd: do not copy files from skel directory if home directory exist and write
  warning message about not copying skel files
  Patch by Peter Vrabec <pvrabec@redhat.com> which fixes:
  https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=143150
  https://bugzilla.redhat.com/beta/show_bug.cgi?id=158574
  https://bugzilla.redhat.com/beta/show_bug.cgi?id=80242
- su: ignore SIGINT while authenticating. A ^C could defeat the waiting
  period and permit brute-force attacks (fixed http://bugs.debian.org/288827),
- uClibc fixes (by Martin Schlemmer <azarah@nosferatu.za.org>):
  added require ngettext (added [need-ngettext] to AM_GNU_GETTEXT() parameters)
  and stub prototype for ngettext() in lib/prototypes.h (neccessary if shadow
  compiled with disabled NLS support)
- groupadd: rewrited for use getopt_long(),
- groupadd, groupdel, groupmod, userdel: do OPENLOG() before pam_start(),
- groupadd: fixed double OPENLOG(),
- removed lib/{grpack,gspack,pwpack,sppack}.c and prototypes from lib/prototypes.h
  (outdated),
- newusers: added flushing passwd and group nscd caches,
- passwd, pwunconv, userdel, vipw: remove flushing shadow nscd cache (nscd do not caches
  shadow map),
- pwck: now pwck OPENLOG with correct name ("pwck" instead "pwsk")
  (fix by Alexander Gattin <arg@online.com.ua>),
- pwck, grpck: replace all puts() with printf() - it fixes problems with extra blank
  lines printed in some messages
  (fix by Alexander Gattin <arg@online.com.ua>),
- passwd: use separated message "Password set to expire." instead "Password changed."
  on "passwd -e" (fix by Christian Perrier <bubulle@debian.org),
- updated translations: cs, de, fi, fr, nl, pl, pt, ru, sk.
*** documentation:
- regenerate all roff man pages using DocBook XSLT Stylesheets 1.69.1,
- usermod(8): give the correct range for system users (0-999 instead of 0-99),
  (http://bugs.debian.org/286258)
- chage(8): better description -1 value passwd in -E, -I and -M options,
- regenerate all roff man pages using DocBook XSLT Stylesheets 1.69.0.

shadow-4.0.11 -> shadow-4.0.11.1                                        21-07-2005

*** general:
- fixed configure.in: now is possible build shadow with enabled/disabled shadow group
  support (thanks for report symptoms of the bug to Greg Schafer <gschafer@zip.com.au>),
- updated translations: sv.

shadow-4.0.10 -> shadow-4.0.11                                          18-07-2005

*** general:
- su: ignore SIGINT while authenticating. A ^C could defeat the waiting period and
  permit brute-force attacks. Also ignore SIGQUIT.
  Fixed: http://bugs.debian.org/52372 and http://bugs.debian.org/288827
- useradd: rewrited for use getopt_long(),
- newgrp: add fix for handle splitted NIS groups: extends the functionality that,
  if the requested group is given, all groups of the same GID are tested for
  membership of the requesting user.
  (fix by Christian Mudra <C.Mudra@science-computing.de>)
- fix nscd_flush_cache(): for some reason doing the INVALIDATE call with two
  write()'s fails. Do one writev() call instead.
  http://bugs.gentoo.org/show_bug.cgi?id=80413
  (submited by Martin Schlemmer <azarah@gentoo.org>)
- merge nscd-socket-path patch from Fedora: newer glibc's have a different nscd socket
  location (/var/run/nscd/socket instead /var/run/.nscd_socket),
- S/Key support is back,
- usermod: added -a option. This flag can only be used in conjunction with the -G
  option. It cause usermod to append user to the current supplementary group list.
  (patch by Peter Vrabec <pvrabec@redhat.com>) 
- chage: added missing \n in error messages,
- useradd, groupadd: change -O option to -K and document it in man page,
- su, sulogin, login: fixed erroneous warning messages when used with PAM about some
  login.defs variables (fix by DJ Lucas <dj@linuxfromscratch.org>),
- autoconf:
-- stop with error message if crypt() not found,
-- remove --with{,out}-libcrypt switch,
-- move all autoheader templates from acconfig.h to configure.in,
- login: setup limits and umask (using login.defs ULIMITS and UMASK variables) only when
  PAM support is disabled (it is task for pam_limits and pam_umask modules),
- sulogin, login: use SYSLOG macro instead syslog() which saves the locale, sets the
  locale to C, sends the message and restores the locale
  (fix by Nicolas François <nicolas.francois@centraliens.net>).
- updated translations: cs, da, de, es, fi, pl, pt, ro, ru, sk.
*** documentation:
- pwck(8): document -q option (based on Debian patch for fix http://bugs.debian.org/309408)
- pwck(8): rewrited OPTIONS section and better SYNOPSIS,
- lastlog(8): document that lastlog is a sparse file, and don't need to be rotated
  http://bugs.debian.org/219321
- login(8): better explain the respective roles of login, init and getty with regards
  to the utmp file (based on 441_manpages-shadow.5 Debian patch),
- shadowconfig(8): removed (will be maintained in Debian shadow pkg repository),
- groupadd(8): document -o option,
- in SEE ALLSO section in groupadd(8), groupdel(8), groupmod(8), userdel(8), usermod(8)
  added refer to gpasswd(8) (suggested by Mike Frysinger <vapier@gentoo.org>).

shadow-4.0.9 -> shadow-4.0.10                                           28-06-2005

*** general:
- mkpasswd: removed,
- userdel: now deletes user groups from /etc/gshdow as well as /etc/group.
  Fix by Nicolas François <nicolas.francois@centraliens.net>.
  http://bugs.debian.org/99442
- usermod: when relocating a user's home directory, don't fail and remove the new
  home directory if we can't remove the old home directory for some
  reason; the results can be spectularly poort if, for instance, only
  the rmdir() fails. Patch prepared by Timo Lindfors <lindi-spamtrap@newmail.com>.
  http://bugs.debian.org/166369
- su: fix syslogs to be less ambiguous. Use old:new format instead of old-new
  because '-' can appear in usernames
  http://bugs.debian.org/213592
- removed not used now libmisc/setup.c,
- login: use also UTMPX API instead UTMP on failure (login was affected for this
  when shadow was builded without PAM support)
  patch by Nicolas François <nicolas.francois@centraliens.net>
- login: the PAM session needs to be closed as root, thus before change_uid()
  http://bugs.debian.org/53570 http://bugs.debian.org/195048 http://bugs.debian.org/211884
- login: made login's -f option also able to use the username after -- if none
  was passed as it's optarg
  http://bugs.debian.org/53702 
- login: check for hushed login and pass PAM_SILENT if true,
  http://bugs.debian.org/48002
- login: fixed username on succesful login (was using the normal username,
  when it should have used pam_user) http://bugs.debian.org/47819
- remove using SHADOWPWD #define so now shadow is allways builded with shadow
  passwowd support,
- chage: rewrited for use getopt_long(),
- updated translations: ca, cs, da, fi, pl, ru, zh_TW.
*** documentation:
- most of the man pages now are generated from XML files so in case submiting any
  chages to this resources please make diff to XML files,
- chfn: give more details about the influence of login.defs on what's allowed to
  users.

shadow-4.0.8 -> shadow-4.0.9                                            23-05-2005

*** general:
- passwd: fixed segfault in non-PAM connfiguration
  (submited by Greg Schafer <gschafer@zip.com.au>),
- newgrp: fixed NULL pointer dereference - getlogin() and ttyname() can
  return NULL which is not checked (http://bugs.debian.org/162303),
- updated translations: ro, ru,
- added new translations: vi,
- lib/getdef.c: leaves the table as it is, and changes from the binary search to
  a sequential one (Lucas Correia Villa Real <lucasvr@gobolinux.org>),
- lastlog: fixed --help message (s,--login,--user,) http://bugs.debian.org/249611.

shadow-4.0.7 -> shadow-4.0.8                                            26-04-2005

*** general:
- remove not working OPIE and SKEY support,
- chage, useradd, usermod: reduce multiple OPENLOG() calls,
- passwd: fix #61313 Debian bug: "passwd -S root" (as a normal user) should not
  display "You may not change the password for root.",
- vipw: fixed race condition (Debian #242407 bug; fix by Alexander Gattin
  <arg@online.com.ua>),
- configure.in: add using AC_GNU_SOURCE macro for kill compilation warnings about
  implicit declaration of function `fseeko',
- faillog: changed faillog record display format for allow fit in 80 columns all
  faillog atributies,
- removed NDBM code (unused),
- fixed use of SU_WHEEL_ONLY in su. Now su realy is avalaible for wheel group
  members. Thanks to Mike Frysinger <vapier@gentoo.org> for report:
  http://bugs.gentoo.org/show_bug.cgi?id=80345
- drop never finished kerberos and des_rpc support (for kerberos support back firs
  must be prepared modularization),
- fixed UTMP path detection (by Kelledin <kelledin@users.sf.net>),
- useradd: rewrited group count to dynamic (by John Newbigin
  <jnewbigin@ict.swin.edu.au>),
- login: fixed create lastlog entry fo users never loged in on non-PAM
  variant of login (fix by <oracular@ziplip.com>),
- remove handle login.defs::NOLOGIN_STR (never used),
- useradd: fixes a potential security problem when mailbox is created in
  useradd.
  Patch and comment by Koblinger Egmont <egmont@uhulinux.hu>:
  Only two arguments are passed to the open() call though it expects three
  because O_CREAT is present. Hence the permission of the file first becomes
  some random garbage found on the stack, and an attacker can perhaps open
  this file and hold it open for reading or writing before the proper
  fchmod() is executed. (Actually, we could also pass the final "mode" to
  the open() call and then save the consequent fchmod().)
- SELinux changes: added changes in chage, chfn, chsh, passwd for allow
  construct more grained user password/accuunt properties on SELinux
  policies level. Patch originally based on RH changes (submited by Chris
  PeBenito <pebenito@gentoo.org>),
- added SELinux changes: in libmisc/copydir.c (based on Fedora patch),
- updated translations: cs, da, es, eu, fi, fr, it, ko, nl, pl, pt, sk, uk,
- added new translations: tl,
- reindent all source code using -l80,
*** documentation:
- it man pages (by Danilo Piazzalunga <danilopiazza@libero.it>):
-- updated: chfn.1, chsh.1, groups.1, grpck.8, grpconv.8,
   grpunconv.8, id.1, lastlog.8, login.1, newgrp.1, pwunconv.8, shadow.5,
   vigr.8, vipw.8,
-- new: chage.1, chpasswd.8, expiry.1, faillog.5, faillog.8, getspnam.3,
   logoutd.8, porttime.5, pwck.8, shadow.3, shadowconfig.8, su.1,
- passwd(1): fix #160477 Debian bug: improve -S output description,
- newgrp(1): fix #251926, #166173, #113191 Debian bugs: explain why editing /etc/group   
  (without gshadow) doesn't permit to use newgrp,
- newgrp(1): newgrp uses /bin/sh (not bash),
- faillog(8): updated after rewrited faillog command for use getopt_long(),
- login(1): removed fragment about abilities pass enviroment variables in login prompt,
- gshadow(5): new file (by Nicolas Nicolas François <nicolas.francois@centraliens.net>),
- usermod(8): fixed #302388 Debian bug: added separated -o option description,

shadow-4.0.6 -> shadow-4.0.7                                            26-01-2005

- updated translations: da, es, fi, it, nl, pl, pt,
- added zh_TW translation (from Debian resources),
- remove unused now files in lib/ directory,
- switch faillog to use getopt_long(),
- added de vigr(8), vipw(8) man pages (from Debian resources),
- added ro, sq translations (from Debian resources),
- fixed large file support in lastlog and faillog:
-- added AC_SYS_LARGEFILE macro to autoconf,
-- use fseeko() instead fseek() and remove casting file offsets to unsigned
   long.
- lastlog:
-- rewrited source code using the same style as in chpasswd.c,
-- open lastlog file after finish parse comman line optiomns
   (now --help otput can be displayd for users without lastlog
   file read permission),
-- cleanups in lastlog(8) man page using the same style as in
   chpasswd(8).
- chpasswd:
-- switch chpasswd to use getopt_long() and adds a --md5 option
   (by Ian Gulliver <ian@penguinhosting.net>),
-- rewrited chpasswd(8) man page.  

shadow-4.0.5 -> shadow-4.0.6                                            08-11-2004

- su: fixed adding of pam_env env variables to enviroment
  (Martin Schlemmer <azarah@nosferatu.za.org>),
- autoconf: fixed filling MAIL_SPOOL_DIR and MAIL_SPOOL_FILE variables
  which was allways empty (Gregorio Guidi <g.guidi@sns.it>),
- realuy closse security bug in libmisc/pwdcheck.c,
- added missing template/example PAM service config files for chfn, chsh and
  userdel,
- do not translate variable names from /etc/default/useradd during
  "useradd -D".

shadow-4.0.4.1 -> shadow-4.0.5                                          27-10-2004

- change libmisc to private static library,
- added SELinux support (basing on patch from Gentoo),
- chage: more verbose/human readable -l output. This output is much more
  beter for send directly via email for each users as message with account
  status (for example as message with warning about account/password expiration),
- login: fixed handle -f option: now it works correctly without specify "-h
  <host>" if open login session localy is required (thanks for help
  investigate bug for Krzysztof Kotlenga),
- userdel: when removing a user with userdel, userdel was always exits with 1 (fixed).
  Based on http://bugs.gentoo.org/show_bug.cgi?id=66687,
- useradd: added handle /etc/defaults/useradd::CREATE_MAIL_SPOOL={yes|no}.
  Now on adding user account can be also created empty user mail spool.
  Curent code handle only mailbox.
  TODO: add handle create user mail spool in maildir format.
- useradd: when placing symlinks into /etc/skel copy_tree of
  libmisc/copydir.c will properly create the symlink in the destination
  directory but not change the ownership to the target user/group. This
  makes httpd Option SymlinkIfOwnerMatch break for default weg pages
  including symlinks placed into /etc/skel/public_html for example.
  http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=66819
- su: add pam_open_session() support. If builded without PAM support
  propagate $DISPLAY and $XAUTHORITY enviroment variables.
  Based on http://www.gentoo.org/cgi-bin/viewcvs.cgi/sys-apps/shadow/files/shadow-4.0.4.1-su-pam_open_session.patch?rev=1.1
- applied 036_pam_access_with_preauth.patch Debian patch submited by Bjorn
  Torkelsson <Bjorn.Torkelsson@hpc2n.umu.se>: add support for PAM account
  management to restrict access using pam_access when login is invoked with -f.
- applied Owl patches by Solar Designer <solar@openwall.com>:
  shadow-4.0.4.1-owl-pam-auth.diff:
    Moved the PAM authentication in user management commands after
    command-line parsing, made it use separate service names for each command.
    Use constant strings rather than argv[0] for syslog ident in the user
    management commands,
  shadow-4.0.4.1-owl-tmp.diff:
    Remove using mktemp() if mkstemp() prototype not found (use allways mkstemp()),
  shadow-4.0.4.1-owl-check-reads.diff:
    Add checking for read errors in commonio and vipw/vigr (not doing so could
    result in data loss when the records are written back),
- fixed securirty bug in libmisc/pwdcheck.c which allow unauthorized
  account properties modification.
  Affected tools: chfn and chsh.
  Bug was discovered by Martin Schulze <joey@infodrom.org>.
- added it translation (by Danilo Piazzalunga <danilopiazza@libero.it>),
- added sk translation (by Peter Mann <Peter.Mann@tuke.sk>, submited by Christian
  Perrier <bubulle@kheops.frmug.org>),
- added es translation (by Ruben Porras <nahoo82@telefonica.net>),
- updated ko translation (by Changwoo Ryu <cwryu@debian.org>),
- added fi translation (by Tommi Vainikainen <thv@iki.fi>),
- new translations: bs, ca, da, eu, he, id, nb, nl, nn, pt, pt_BR, tr,
  zh_CN (stolen from Debian),
- remove adduser(8) roff include man page to useradd(8).

shadow-4.0.4 => shadow-4.0.4.1                                          14-01-2004
- bug fixes in automake files for generate correct tar ball on "make dist":
  added mising "EXTRA_DIST = $(man_MANS)" in man/*/Makefile.am.

shadow-4.0.3 => shadow-4.0.4                                            14-01-2004      

*** general:
- added missing information about -f options in groupadd usage mesage
  (document this also in man page),
- removed TCFS support (tcfs is dead),
- convert all po/*.po files to utf-8,
- one TODO entry gone: fix nscd flushing databases on change (use
  per service flushing method instead HUPing nscd process),
- removed old AUTH_METHODS dependent code,
- chage: now all code depend on SHADOWPWD. If shadow will not be configured
  on autoconf level for using shadow possword chage is olny stub which
  informs "chage not configured for shadow password support."
- dpasswd: removed,
- login: remove handle login.defs::DIALUPS_CHECK_ENAB code,
- login: remove handle login.defs::NO_PASSWORD_CONSOLE code,
- ALL tools, libraries: remove old SVR4, SVR4_SI86_EUA BSD_QUOTA and ATT_AGE
  dependent code,
- ALL: ready for gettext 0.11.5, automake 1.7.4, autoconf 2.57,
- logoutd, userd: handle also utmpx if avalaile,
- newgrp: fix for non-PAM version
  Use CLOSE_SESSIONS depending code only when USE_PAM.
  The problem was reported by Mattias Webjorn Eriksson using Slackware
  8.1 and reproduced it using slackware-current (9.0beta) (fix submited by
  Simon Williams <simon@no-dns-yet.org.uk>),
- fix in too_many_failures() function: incorrect if() condition in non-PAM
  dependent code in fail login handling (fixed by Krzysztof
  Oledzki <ole@ans.pl>),
*** documentation:
- install groups(1) man page (moved from EXTRA_DIST to man_MANS),
- removed pwauth(8), d_passwd(5), dialups(5) man pages,
- remove text about password aging from passwd(5) (based on Debian changes),
- document useradd and groupadd -M option in en and pl man pages
  (by Jakub Mikusek <mick3y@o.k.pl>).
- added ru passwd(1) man page from KSI resources,
- added es man pages found in Conectiva distribution resources,
- added chch(1), chfn(1) man pages from chinese man pages translation
  project,
- added id(1) man page czech man pages translation project,
- updated ja man pages and added expiry(1),
- removed old doc/ANNOUNCE,
- updated german passwd(1), chsh(1) and login(1) man page and added chfn(1)
  (by Josef Spillner <josef@ggzgamingzone.org>),
- many other cleanups and unifications in man pages.

shadow-4.0.2 => shadow-4.0.3                                             13-03-2002

- added variouse cs, de, fr, id, it, ko man pages found mainly in national
  man pages translations projects (this documents are not synced with
  current en version but you know .. "Documentations is lik sex. When it is
  good it very very good. Whet it is bad it is better than nothing."). Any
  changes for syncing this are welcome and for anyone who will want maintain
  this documents directly I can give cvs write access to project resources.
- added new de translation (by Frank Schmid <frank@cs-schmid.de>).
- fixed building --with-shared: swapped utent (in src/login.c and
  libmisc/utmp.c) and pwent (in libmisc/suauth.c and src/su.c)
  definition/extern (by Dimitar Zhekov <jimmy@is-vn.bg>).
- minor changes and updates in man pages (also merged
  shadow-4.0.0-owl-man.patch by Solar Designer <solar@openwall.com>).

shadow-4.0.1 => shadow-4.0.2                                             17-02-2002

- resolve many fuzzy translations also all this which may cause problems on
  displaing long uid/gid,
- allow use "$" on ending in cereated by useradd usermname accounts for allow
  create machine acounts for samba (thanks to Jerome Borsboom
  <borsboom@tch.fgg.eur.nl> for point this problem in 4.0.1),
- fix small but ugly bug in configure.in in libpam_mics library detection.

shadow-4.0.0 => shadow-4.0.1

- added ability to log session closes in newgrp
  (Joseph Parmelee <jparmele@wildbear.com>),
- add -pcs to .indent.pro file and reindent all code in src/,
- remove "\n" from all SYSLOG() messages,
- finish integrate AGING code into SHADOWPW,
- remove handle old HAVE_USERSEC_H code,
- updated ja and added hu man pages,
- applied patches by Solar Designer <solar@openwall.com>:
  shadow-4.0.0-owl-chage-drop-priv.diffd
  shadow-4.0.0-owl-chage-ro-no-lock.diff:
    Added locks which are needed when doing r/w accesses, not when running
    as root.  If root does read-only, there's no lock needed. Added missing
    "#include <errno.h>" for above (me).
  shadow-4.0.0-owl-warnings.diff
    Olny one fix from this patch was aplayd because other was fixed few days
    before :)
  shadow-4.0.0-owl-check_names.diff
    Merge only prat this patch with checking login name matching; checking
    is login string isn't longer than possible it will be good prepare using
    probably _POSIX_LOGIN_NAME_MAX from <bits/posix1_lim.h>,
  shadow-4.0.0-owl-chage-drop-priv.diff
  shadow-4.0.0-owl-pam-auth.diff
    Merge part with reorder initialize PAM and checkin is chage is runed by
    root or not - now chage can be runed from non-root account for checking
    by user own account information (if PAM enabled).
- fixes for handle/print correctly 32bit uid/gid (Thorsten Kukuk <kukuk@suse.de>),
- implemented functions for better reloading the nscd cache (per NSS map)
  (Thorsten Kukuk <kukuk@suse.de>),
- fixed warnings "not used but defined" on compile using gcc 3.0.x 
  (bulletpr00ph <bullet@users.sourceforge.net>),
- added ja, ko translations found in SuSE,
- added symlinks: newgrp -> sg, vipw -> vigr,
- added vigr(1) man page as roff .so link to vipw(1),
- added sg(1) man page as roff .so link to newgrp(1),
- installed fix for SEGV when using pwck -s on /etc/passwd file with
  empty lines in it.
  
shadow-20001016 => shadow-4.0.0                                          06-01-2002

- fix bug discovered and fixed by Marcel Ritter
  <Marcel.Ritter@rrze.uni-erlangen.de>
  Due to a big buffer size in lib/commonio.c this error does only appear
  if a line gets longer than 4096 bytes (there are probably very few people
  stumbling across this).
  Ths bug can be exposed by trashing /etc/groups file using useradd with script:
        #!/bin/sh
        typeset -i NUM
        NUM=0
        groupadd demogroup
        while [ $NUM -le 1000 ]; do
           useradd -g demogroup -G demogroup -p "NONE" user$NUM
           NUM=$NUM+1
        done
- remove limit 32 to groups per user by (the same user can belong to
  more than 32 groups) by use sysconf(_SC_NGROUPS_MAX) instead constant
  NGROUPS_MAX (patch by Radu Constantin Rendec <radu.rendec@ines.ro>)
  NOTE: it probably need testing on other system for add
  some condition for using sysconf(_SC_NGROUPS_MAX) or NGROUPS_MAX constant,
- added -s option to {pw,grp}ck to sort checked files by UID/GID,
- drop detecting is pam_strerror() need one or two arguments. Instead using
  PAM_STRERROR() macro use directly pam_strerror() function with two
  arguments. pam_strerror() with one argument is obsoleted,
- adde ja man pages (probably some man pages need update),
- much better automake support,
- added pt_BR man pages for gpasswd(1), groupadd(8), groupdel(8),
  groupmod(8), shadow(5) (man pages for other nations also are welcome),
- mamny small fixes and updates nad improvements in man pages,
- aplayed Debian patch to man pages for shadowconfig,
- remove limit to 6 chars logged tty name (012_libmisc_sulog.c.diff Debian
  patch).

shadow-20001012 -> shadow-20001016:
- conditionaly disabled body reload_nscd() because not every
  version of nscd can handle it (this can be enabled by define
  ENABLE_NSCD_SIGHUP) (Marek Michałkiewicz  <marekm@linux.org.pl>)
- fixes on autoconf/automake level for dist target,
- Julianne F. Haugh new contact adress.

shadow-20000902 => shadow-20001012

- removed /redhat directory with obsoleted files (partialy rewrited spec
  file is now in root directory),
- aplayed shadow-19990827-group.patch patch from RH wich prevents adduser
  overwrite previously existing groups in adduser,
- added PAM support for chage (bind to "chage" PAM config file) also
  added PAM support for all other small tools like chpasswd, groupadd,
  groupdel, groupmod, newusers, useradd, userdel, usermod (bind to common 
  "shadow" PAM config file) - this modificaytions mainly based on
  modifications prepared by Janek Rękojarski <baggins@pld.org.pl>,
- many small fixes and improvments in automake (mow "make dist"
  works correctly),
- added cs translation (Jiri Pavlovsky <Jiri.Pavlovsky@ff.cuni.cz>).

shadow-20000826 => shadow-20000902

This is probably the last release from me.
Tomasz Kloczko <kloczek@rudy.mif.pg.gda.pl> is the new maintainer.
Good luck!

(I'm still interested to know what is going on with this package,
which is fairly important to many Linux distributions, so please
Cc: marekm@linux.org.pl in any related discussions - just don't
expect me to respond quickly...)

Previous warning still applies - be careful!

- applied some of the Red Hat patches (revised slightly), thanks to
  Bernhard Rosenkraenzer <bero@redhat.de>: fix for truncated long
  lines (>8K) in /etc/group, send SIGHUP to nscd (caching daemon
  in glibc 2.1.x) after changing anything, add usermod -L and -U
  options, remove LOG_CONS from openlog(), chage -d and -E handles
  dates in yyyy-mm-dd format ('/' is not required)
- various cleanups

shadow-19990827 => shadow-20000826

WARNING: this release is not tested (other than that it compiles for me),
please be careful.  Previous release was a year ago, so it is really time
to release something and start looking for a new, better maintainer...
(I've been extremely busy recently.  Credit for most of the real work,
such as complete PAM support, should go to Ben Collins <bcollins@debian.org>
who maintains this package for Debian.)

- merged most of the changes from Debian (not all of them yet, PAM support
  should be complete but is not tested - need to upgrade to potato first)
- added Polish translations of manual pages from PLD
- change sulog() to not depend on global variables oldname, name
- try to not follow symbolic links when deleting files recursively
  in userdel (still not perfect, safest to do it in single user mode)
- removed workarounds for ancient (pre-ANSI) C compilers - use gcc!
  (a few ANSI C constructs were used already, and no one complained)
- updated author's e-mail address (jfh@bga.com -> jfh@austin.ibm.com)

shadow-19990709 => shadow-19990827

- upgrade to autoconf-2.13, automake-1.4, libtool-1.3.3
- i18n: added French translation by Vincent Renardias <vincent@ldsol.com>
- i18n: added Swedish translation by Kristoffer Brånemyr <ztion@swipnet.se>
- logoutd no longer reads /etc/logoutd.mesg at startup - instead, read
  it when sending to luser's tty (no need to reload with SIGHUP)
- added support for "usergroups" feature often found in Linux distributions
  (if USERGROUPS_ENAB in login.defs set to "yes", uid != 0, uid == gid, and
  username == groupname, then set umask to 002 instead of 022)
- Debian: pwck and grpck are now run from a daily cron job (root will
  receive an e-mail if something is wrong), and at system startup
- added support for setting umask in /etc/limits
- when using OPIE, re-prompt with echo on after empty password was entered
- GETPASS_ASTERISKS now run time configurable (login.defs)
- getpass() now uses stdin and stderr (not stdout) if it can't open /dev/tty
- getpass() allows all input to be erased using Control-U, and beeps when
  too many characters are entered
- removed obsolete sgtty support, in 1999 everyone should have termios :)
- Debian: tar wrapper no longer needed to build packages as non-root user
  (install libtricks, and use "dpkg-buildpackage -rfakeroot" instead)
- Debian: changes for GNU Hurd by Marcus Brinkmann <brinkmd@debian.org>:
  dpkg-architecture, cross compilation, only build passwd, add
  etc/login.defs.hurd conffile, conditionalize CBAUD
- newgrp sets $HOME before running the new shell
- both "sg group command" (usage message) and "sg group -c command"
  (man page) work, updated both the usage message and the man page :)
- i18n: added missing _() for some translatable strings

shadow-19990607 => shadow-19990709

- added PAM support to chfn and chsh (thanks to Thorsten Kukuk)
- fixed a bug in newgrp if the user is in >= 17 groups
- added @LIBSKEY@ to LDADD for all programs (for some reason,
  almost all programs need it if skey/opie support is enabled)
- changed grpconv/grpunconv to compile with --disable-shadowgrp
- changed faillog to do something (assume -p) with no options specified
- updated version of the udbachk passwd/shadow/group file integrity
  checker (contrib/udbachk.v012.tgz)

shadow-19990307 => shadow-19990607

- upgraded to libtool-1.2, latest config.{guess,sub}
- added missing #include "defines.h" in libmisc/login_desrpc.c - thanks
  to almost everyone for reporting it :-)
- moved PAM-related defines to pam_defs.h
- added some braces to if/else to avoid egcs warnings
- started adding PAM support to login (based on util-linux, not finished yet)
- changed "!" to "x" for pw_passwd in src/newusers.c
- a few more Y2K fixes
- added contrib/udbachk.tgz (passwd/shadow/group file integrity checker),
  thanks to Sami Kerola
- Debian: made /etc/{limits,login.access,login.defs,porttime,securetty}
  files all mode 0600 (Bug#38729 - login: /etc/limits is world readable)
- updated mailing list information (moved again, now hosted by SuSE),
  updated README.mirrors, other minor documentation updates
- made getpass work with redirected stdin
- new readpass echoing asterisks disabled by default by popular demand
  (can be enabled at compile time: ./configure --enable-readpass)
- the random number of asterisks in readpass is now more random
  (random number generator initialization was missing)
- commented out --enable-md5crypt (obsolete) in configure.in
- when checking for libskey, link with -lcrypt if libcrypt is available
  (otherwise the configure test for libskey fails - libskey needs libcrypt)
- added Package/Version ident strings (so you can use the RCS "ident"
  command to check any binary, which version of shadow it comes from)

shadow-981228 => shadow-19990307

- added support for setting process priority in /etc/limits
- i18n: updated Greek translation
- i18n: added Polish translation by Arkadiusz Miskiewicz
- documented the -p option in useradd.8 and usermod.8 man pages
- some "const" gcc warning fixes
- attempt to fix lib/snprintf.c compilation problems
- added restart/reload/force-reload to /etc/init.d/logoutd (found by lintian)
- always require password for root logins (even with NO_PASSWORD_CONSOLE)
- workaround for RedHat's CREATE_HOME feature in /etc/login.defs
- changed to Y2K compatible version numbering
- more Y2K fixes, use the ISO 8601 date format (yyyy-mm-dd) for default
  values of user-entered dates (you can still enter dates in any format
  supported by GNU date)
- oops, added doc/README.nls to list of files to distribute
- added missing sanitize_env() call to src/login.c
- debian/rules installs /bin/login non-setuid by default, just in case...
- build Debian packages with cracklib support (depends on cracklib-runtime)

shadow-980724 => shadow-981228

- login now clears the username in argv[] (in case someone types the
  password instead of username, by mistake)
- i18n support, Greek translation (Nikos Mavroyanopoulos), see README.nls
- updated author's e-mail address (jfh@tab.com -> jfh@bga.com)
- new getpass() replacement that displays *'s (Pavel Machek)
- no password required when logging in from ttys listed under
  NO_PASSWORD_CONSOLE in login.defs (Pavel Machek)
- fixed limits code so RLIMIT_AS should work
- upgraded to Debian 2.0
- built a new machine (P2 350MHz, 64MB RAM) so the thing can be compiled
  in reasonable time again
- upgraded to automake-1.3, libtool-1.0h (also new config.guess and
  config.sub that work on i686)
- usermod fixed to handle group names starting with digits (not recommended)

shadow-980626 => shadow-980724

- security: login no longer gives you a root shell if setgid()
  or initgroups() or setuid() fails for any reason, discovered
  by Ted Hickman <thickman@sy.net>
- remove libshadow.so -> libshadow.so.x.x symlink after install
- a few int -> uid_t type cleanups
- fail immediately (don't retry) in *_lock() if euid != 0
- added sample PAM config files etc/pam.d/{passwd,su}
- preliminary PAM support in su (untested - use at your own risk,
  comments and patches welcome!)
- cleanup and more comments in OPIE code (Algis Rudys)
- added support for TCFS (Transparent Cryptographic File System)
  (use ./configure --with-libtcfs, see http://tcfs.dia.unisa.it/
  for more info), thanks to Aniello Del Sorbo

shadow-980529 => shadow-980626

- fixed bug in commonio_lock() (infinite recursion if lckpwdf() not
  used and database cannot be locked), thanks to Jonathan Hankins
- fixed bug in copy_tree() (NUL-terminate readlink() results),
  thanks to Lutz Schwalowsky
- no need to press Enter after Ctrl-C to interrupt password prompt
- removed a few harmless gcc warnings
- secure RPC login disabled if <rpc/key_prot.h> not found (glibc 2.0)
- faillog.8: changed /usr/adm -> /var/log
- pwconv.8: documented that it may fail on invalid password files

shadow-980417 => shadow-980529

- fixed "interesting" strzero() bug introduced by me in 980417:
  strzero(cp) didn't work as intended (the macro used a local
  variable called "cp" - oops...); Leonard N. Zubkoff was the
  first person to report it - thanks!
- fixed usermod -e to accept empty argument (like useradd),
  thanks to Martin Bene
- several changes from Debian 980403-0.2, see debian/changelog
- added contrib/shadow-anonftp.patch (not yet merged, sorry...)
  thanks to Calle Karlsson

shadow-980403 => shadow-980417

- fixed login session limits (again - broken since 980130)
- more symbolic constants for exit status values
- fixed logoutd to work with 8-character usernames in utmp
  (no room for terminating NUL!)
- various fixes to make the code more glibc2-friendly
- updated doc/cracklib26.diff (fix for empty gecos, etc.)
- updated the files in redhat/ from shadow-utils-970616-11.src.rpm
  (RH 5.0 updates)

shadow-980130 => shadow-980403

- security: su now creates the sulog file (if enabled and doesn't
  already exist) with umask 077
- hopefully removed arbitrary group size limits (not yet for
  shadow groups though - sgetsgent() still needs a rewrite,
  but I don't want to delay this release any longer...)
- fixed NULL dereference in groupmod -n

shadow-971215 => shadow-980130

- Debian binary packages can be built without root privileges
  (tar wrapper - debian/tar.c)
- new subdir "redhat" (needs more work, see redhat/README)
- in several places, exit(127) if exec fails with ENOENT, and
  exit(126) on other errors (as in ksh and bash)
- renamed getpass() and md5_crypt() to libshadow_* to avoid name
  conflicts with libc functions - md5_crypt() is also in libcrypt.a
  on Linux/PPC, thanks to Anton Gluck <gluc@midway.uchicago.edu>
- handle crypt() returning NULL (possible according to Single Unix
  Spec) more gracefully (exit instead of SIGSEGV)
- fixed bug in putgrent() that showed up when realloc() moved the
  buffer while expanding it, thanks to Floody <flood@evcom.net>
- fixed bug in login session limits (with a limit set to N logins,
  only N-1 logins were allowed), thanks to Floody <flood@evcom.net>
- upgraded to libtool-1.0h (now recognizes GNU ld on Debian 1.3.1)
- newer config.guess and config.sub (should work on x86 for x > 5)
- removed doc/automake-1.0.diff (obsoleted by automake-1.2)
- added doc/cracklib26.diff (some patches for cracklib-2.6)
- documented more (not all yet) login.defs(5) settings
- replaced more exit status numeric values with #defines
- shadow-utils.spec now generated from shadow-utils.spec.in
  (so I don't have to edit version numbers for every new release)
- groupadd -f option, based on RedHat's shadow-utils-970616-9 patch
  ("force" - exit(0) if the group already exists); other RedHat-
  specific options not added yet (best done in a perl script that
  runs useradd/usermod/groupadd - see Debian's adduser-3.x)
- added -O option (override login.defs values) to useradd and groupadd
- if usermod can't update the group file(s), exit(10) but update the
  password file(s) anyway (as documented by Solaris man page)
- useradd should no longer set sp_expire to the current date (oops)
- configure.in: added --enable-desrpc, check for gethostbyname in libc
  before trying libnsl (necessary for Solaris; not for Linux or Irix,
  even though libnsl may be present), fixed pw_age/pw_comment/pw_quota
  detection, setpgrp vs. setpgid, other minor tweaks
- various */Makefile.am tweaks
- login.defs: added FAKE_SHELL - program to run instead of the login
  shell, with the real shell in argv[0] (Frank Denis)
- login.defs: ignore case in yes/no settings
- more E_* defines instead of hardcoded numbers for exit()
- added sanitize_env() for setuid programs
- login_desrpc() checks for getnetname() errors
- new password is not "too similar" if it is long enough
- replacement strstr() was static, no one noticed :-)
- {pw,spw}_lock() and {pw,spw}_unlock() track the lock count and call
  lckpwdf() and ulckpwdf() as needed, *_lock_first() hack removed
- login sets $REMOTEHOST for remote logins
- added newgrp -l option (Single Unix Spec, same as "-")
- EXPERIMENTAL shared lib support using libtool (libshadow.so saves about
  200K of disk space on Linux/x86), enabled by default if supported by
  the system, use ./configure --disable-shared if it causes any problems.
  Warning: libshadow.so is intended for internal use by this package
  only - binary compatibility with future releases is not guaranteed.
  There should be no need to link any other programs with libshadow.so -
  the libshadow.so -> libshadow.so.x.x symlink is unnecessary.
- pam_strerror() takes one or two arguments, depending on the Linux-PAM
  version (!) - added check to configure; fixed do_pam_passwd prototype
- libmisc/login_access.c should compile on Linux/PPC and Solaris
- added information about the new ftp site to doc/README.mirrors

shadow-971001 => shadow-971215

- added workaround for NYS libc 5.3.12 (RedHat 4.2) bug to grpck
- updated the RPM .spec file
- renamed rlogin() to do_rlogin() to avoid Linux/PPC build problem
  (glibc defines something else named "rlogin" in utmpbits.h ?)
- added MD5 checksums in Debian packages
- added -p and -g options to vipw (edit the password or group file
  respectively, regardless of the command name in argv[0])
- removed old DBM support (NDBM code is still there)
- fixed a bug in gpasswd: current username was incorrectly identified as
  "root" because of setuid(0) done too early.  It may be a security hole
  when using shadow groups - if "root" is listed as a group administrator,
  any user can add/remove members in that group.  Thanks to Jesse Thilo.
- gpasswd now logs which user (root or group admin) made the changes
- passwd now uses $PATH to search for the chfn, chsh, gpasswd commands
- newgrp and add_groups() allocate supplementary group lists dynamically
- moved check_shell() from src/chsh.c to libmisc/chkshell.c
- CHFN_RESTRICT in login.defs can now specify exactly which fields may be
  changed by regular users (any combination of letters "frwh")
- fixed contrib/pwdauth.c segfault with non-existent usernames
- minor change in lib/getdef.c to handle quotes better (Juergen Heinzl)
- new date parsing code (from GNU date) used by useradd, usermod, chage
- upgraded to automake-1.2, added libtool-0.7 (no libshadow.so yet)
- converted code to ANSI C, added ansi2knr (untested - use gcc!)
- fixed useradd -G segfault (one '*' that shouldn't be there)
- allow 8-bit characters in chfn
- added support for RLIMIT_AS (max address space) in libmisc/limits.c
- changed the handling of NIS plus entries in password files
- some more tweaking in various debian/* files
- logoutd uses getutent() instead of reading utmp file directly
- fixed lckpwdf() called twice (and failing) when changing password
  if the user is not listed in /etc/shadow (Mike Pakovic)
- erase and kill characters left unchanged if not defined in login.defs

shadow-970616 => shadow-971001

- Debian: mkpasswd no longer installed (dbm files not supported)
- chpasswd checks for shadow/non-shadow at run time, too
- added chpasswd -e (input file with encrypted passwords) - Jay Soffian
- changed libmisc/login_access.c as suggested by Dave Hagewood
- replaced sprintf() with snprintf() in several places
- added lib/snprintf.[ch] (from XFree86) for systems without snprintf()
- minor tweaks in contrib/adduser.c (/usr/local -> /usr)
- non-root users can only run su with a terminal on stdin
- temporarily disabled DES_RPC because getsecretkey() causes login to hang
  for 5 minutes on at least one RH 4.0 system.  Not sure if this is a bug
  in libc, or system misconfiguration.  Needs further investigation.
- check for strerror() and -lrpcsvc (should compile on SunOS again)
- fixed free() called twice in libmisc/mail.c
- added information about mirror sites (doc/README.mirrors)
- updated pwconv.8 and pwunconv.8 man pages
- "make install" now installs pwconv, pwunconv, grpconv, grpunconv
- pwauth.8 no longer installed (AUTH_METHODS not supported by default)
- corrected su.1 man page ($SHELL not used)
- no need for --with-md5crypt if the MD5-based crypt() is already in libc
  (or another library specified in /etc/ld.so.preload - Linux ld.so 1.8.0+)
- cleaned up PASS_MAX in getpass() (127 always assumed)
- default editor for vipw changed from /bin/ae to a real editor :)

shadow-970601 => shadow-970616

- fixed execlp call (missing NULL) in src/vipw.c
- vipw now preserves permissions on edited files
- commented out the xdm-shadow hack in shadowconfig
- improved RedHat spec file (Timo Karjalainen)
- updated mailing list information
- added information about the shadow paper (doc/README.shadow-paper)
- renamed doc/console.c.spec (confused RPM)

shadow-970502-2 => shadow-970601

- fixed a typo in libmisc/mail.c causing login to segfault
  if MAIL_CHECK_ENAB=yes (sorry!)
- patches for OPIE support (Algis Rudys) (untested)
- programs that modify /etc/passwd or /etc/shadow will use
  lckpwdf() if available
- now compiles with PAM support! (still untested)
- cosmetic error message changes (prefixed by argv[0]:)

shadow-970216 => shadow-970502-2

- shadow group support fixes (grpconv didn't work - for some
  reason, putsgent() returns 1 instead of 0 on success;
  now -1 = failure, anything else = success)
- upgraded to autoconf-2.12
- pwconv and pwunconv now follow other UN*X systems and SVID3
  (modify files in place), original versions moved to "old"
- scologin.c moved to "old" (it was only for SCO Xenix) so
  people stop sending patches for scologin.c gcc warnings :)
- don't use the MD5* functions in libmisc/salt.c (glibc has
  the new md5 crypt(), but no <md5.h> and MD5* functions!)
- support for MkLinux, Solaris, JIS, Qmail (Frank Denis)
- "passwd -S -a" now really works
- support for Debian, vipw, a few fixes (Guy Maor)
- src/login.c radius bug fix (Rafal Maszkowski)
- ISSUE_FILE_ENAB -> ISSUE_FILE in the sample /etc/login.defs
- fixes for glibc and DES_RPC (Thorsten Kukuk)
- limits.5 man page (Luca Berra)
- expiry will work setgid shadow too, removed euid 0 check
- added check for a64l() to configure (glibc)

shadow-961025 => shadow-970216

- major rewrite of *io.c (no more 4 copies of almost identical code)
- use fsync() (if available) instead of sync() when updating password files
- use fchmod() and fchown() if available
- keep the NIS "plus on a line by itself" entries at end of passwd/group
- configure checks location of passwd/chfn/chsh programs (/usr/bin or /bin)
- passwd -S -a: list information about all users (root only)
- passwd -k: change only expired passwords
- passwd -q: quiet mode
- first attempt at PAM support in passwd
- passwd updates the non-shadow password if /etc/shadow exists but the
  user has no shadow password
- passwd logs who changed the password, added hook to allow non-root
  administrators who can change passwords (not implemented yet)
- su sets $HOME even without the "-" option (suggested by Joey Hess)
- added -p (set encrypted password) option to useradd and usermod
  (idea from hpux10 - undocumented option used internally by SAM)
- useradd -D -e does the right thing (set default expiration date)
- USERDEL_CMD in login.defs instead of hardcoded {ATRM,CRONTAB}_COMMAND
  because there are just too many systems that need different commands
- removed #ifdef FAILLOG_LOCKTIME (now always enabled), warning: the
  faillog file format has been changed (somewhere between 960129 and
  960810), please truncate the old file (if any) to zero length
- ISSUE_FILE (may be different from /etc/issue) instead of ISSUE_FILE_ENAB
- wtmp, lastlog, faillog file location guessed by configure
- separate checks for invalid user and group names, max username length
  based on struct utmp (it's not always 8 characters)
- pwck and grpck now check for invalid user/group names
- pwck -q (quiet, report only serious problems) option added
- separate cleaner sgetpwent() without the NIS magic
- NIS entries ignored (never changed) by *io.c, pwck, grpck
- various code cleanups
- new get_my_pwent() function for getting my own username, uid etc.
- faillog opens the file read-write if possible (even if not root)
- passwd -S allowed for normal users (for their own uid only)
- handle the case of login denied to passwordless accounts better
  ("Login incorrect" without "Password:" prompt looks strange)
- corrected author information and removed a copyright restriction

shadow-960925 => shadow-961025

- fixed a few typos in shadow group code
- don't check for names starting with 'r' to determine if the shell
  is restricted, use /etc/shells instead (for the "rc" shell)
- removed extra definition of LASTLOG_FILE in configure.in
- expiry no longer segfaults if no /etc/shadow
- userdel -r "can't remove mailbox" warning no longer printed on success
- useradd exit codes changed to match hpux10 man page
- fixed possible fd leak etc. in file locking code (lib/commonio.c)

shadow-960920 => shadow-960925

- bug fixes to the new environment code using malloc
- use hardcoded names instead of basename(argv[0]) for openlog() in programs
  that users can run (chage, chfn, chsh, gpasswd, login, newgrp, passwd, su)
- small fix to isexpired(), and use it in passwd as well
- use strftime() and strptime() if available
- added chmod 600 /etc/passwd- at the end of pwconv5 (backup file may
  contain encrypted passwords!)
- pass size to change_field (chage, chfn, chsh) instead of assuming BUFSIZ
  (nothing bad happened yet, just a cleanup)
- gpasswd should work with both shadow and non-shadow group passwords
- detect unsupported options if no shadow (gpasswd, useradd, usermod)
- passwd -e for sunos4 (ATT_AGE), untested
- read environment from file (ENVIRON_FILE in login.defs), idea from ssh
- small fix to l64a()
- passwd prints a message after password successfully changed (for things
  like poppassd which run passwd and expect some output)
- passwd logs if password was changed by root (as opposed to a luser)
- passwd uses current uid if no username argument and getlogin() fails

shadow-960910 => shadow-960920

- use malloc for environment variables, no more MAXENV (Juergen Heinzl)
- newusers should work with both shadow and non-shadow passwords
  (still left to do: chpasswd, gpasswd)
- login-static no longer compiled by default
- more SYSLOG() macros

shadow-960810 => shadow-960910

- updated README.linux to point to the new ftp site
- chfn and chsh optionally (CHFN_AUTH) prompt for password like util-linux
- man pages now closer to LDP standards (Ivan Nejgebauer)
- newgrp uses SYSLOG_SG_ENAB (not SU) as in the /etc/login.defs comments
- obscure.c fixed to compile with HAVE_LIBCRACK
- cosmetic message changes in age.c
- utmp open error check fixed in utmp.c
- grpunconv added (Michael Meskes)
- login reports invalid login time, not "Login incorrect" (Ivan Nejgebauer)
- logoutd sets OPOST before writing to the tty (Ivan Nejgebauer)
- sulogin: don't use syslog(), other minor changes (Ivan Nejgebauer)
- passwords can be changed if sp_max == -1 (now considered infinity)
- usermod: don't use sizeof(struct lastlog) when writing to faillog (ugh)
- started replacing lots of #ifdef USE_SYSLOG with cleaner macros
- contrib/rpasswd.c added (Joshua Cowan)
- PASS_MAX is 127 with MD5_CRYPT (not just for Linux - sunos4 too...)
- workarounds for a RedHat NYS libc getspnam() bug (if /etc/shadow
  doesn't exist, it succeeds and returns sp_lstchg==0 instead of -1).

shadow-960129 => shadow-960810

- automake, configure checks for libcrypt and libcrack (Janos Farkas)
- added --enable-shadowgrp to configure (shadow groups disabled by default)
- should compile on SunOS 4.1.x - but it does NOT mean that it works :-)
- login sets HUSHLOGIN=TRUE or FALSE (for shell startup scripts etc.)
- hopefully removed all the rcsid warnings
- contrib/atudel perl script to remove at jobs (thanks to Brian Gaeke)
- resource limits (Cristian Gafton)
- workaround for buggy init/getty(?) leaving junk in ut_host on RedHat
- more fixes in man pages
- pwck and grpck no longer suggest to run mkpasswd if *DBM not compiled in
- most programs (groupadd, groupdel, groupmod, grpck, login, passwd, pwck,
  su, useradd, userdel, usermod) should now work with both shadow and
  non-shadow passwords/groups (check for /etc/shadow and /etc/gshadow at
  run time); a few programs still left to do
- mailbox mv/chown/rm in usermod/userdel (suggested by Cristian Gafton)
- new contrib/adduser.c from Chris Evans
- lots of other minor changes
- source tree reorganization, GNU autoconf, portability cleanups
- basename() renamed to Basename() to avoid name space confusion
- new programs to create /etc/shadow and /etc/gshadow: pwconv5, grpconv
- newgrp cleanup and a few fixes
- useradd uses PASS_MAX_DAYS, PASS_MIN_DAYS and PASS_WARN_AGE
- don't make the first group member the group admin by default
  (define FIRST_MEMBER_IS_ADMIN to get the old gpasswd behaviour)
- password aging constants, NGROUPS_MAX and syslog stuff in only one
  place (defines.h) instead of repeating it in all source files...
- added userdel -r safety check (refuse to remove the home directory
  if it would result in removing some other user's home directory)
- usermod -u now correctly checks for non-unique uid (unless -o)
- sync() after updating password files, just to be more safe
- "make install" should install /etc/login.defs if it doesn't exist
- new option to control what happens if we can't cd to the home directory
  (DEFAULT_HOME in /etc/login.defs)
- enter the home directory as the user, not as root (for NFS etc.)
- added check for Slackware bugs (nobody UID -1) in pwck and grpck
- new CONSOLE_GROUPS feature (thanks to pacman@tardis.mars.net), it is
  possible to add specified groups (floppy etc.) for console logins
- new faillog feature: lock account for specified (per-user) time since
  the last failure after exceeding the failure limit
- new man pages (gpasswd.1, login.access.5, suauth.5)
- fixes in man pages, renamed *.4 to *.5
- new "contrib" directory (two adduser programs)
- changed some "system" to "feature" #ifdefs (autoconf someday...)
- sulogin no longer requires to be run from init, should work from rc
  scripts too
- changes to prevent unshadowing with libc SHADOW_COMPAT (get info
  using xx_locate(), modify it and call xx_update(), don't write back
  anything returned by getpwnam() etc.)
- stupid bug fixed in lastlog.c
- don't move non-directories in "usermod -m"
- don't log unknown usernames (passwords mistyped for usernames) (lmain.c)
- macros to get around ancient compilers which don't like prototypes
- make more use of "const" (not everywhere yet)
- added #ifdef AUTH_METHODS - very few people use administrator defined
  authentication methods because many programs are not aware of them;
  not supporting them makes the code simpler
- new "save" and "restore" Makefile targets, thanks to Rafal Maszkowski
- sgetgrent() in libshadow.a is optional, some versions of libc have it,
  see HAVE_SGETGRENT in config.h (grent.c)
- don't use continued lines in /etc/group, the standard getgr*() functions
  don't support that (grent.c)
- removed the third main() argument (according to libc docs, not allowed by
  POSIX.1 - use environ instead) (lmain.c, smain.c, newgrp.c, sulogin.c)
- login access control (lmain.c, login_access.c)
- added copyright notice to login_access.c (from logdaemon-5.0)
- detailed su access control (smain.c, suauth.c) - thanks to Chris Evans
- added closelog() in su before executing the shell (smain.c)
- getting current user name changed (smain.c)
- "x" instead of "*" in pw_passwd, consistent with pwconv (useradd.c)
- getpass() shouldn't return NULL except on errors (getpass.c)
- moved isexpired() to isexpired.c (now part of libshadow.a) from age.c
- SunOS4-like passwd -e (force change on next login) (isexpired.c, passwd.c)
- can use shadow support in new versions of Linux libc instead of libshadow.a,
  see HAVE_SHADOWPWD, HAVE_SHADOWGRP in config.h.linux (shadow.c, gshadow.c)
- "no shadow password" not logged, the same /bin/login should work with both
  shadow and non-shadow passwords (lmain.c)
- some cleanup in various places (lmain.c, passwd.c)
- new program to verify username/password pairs, for xlock etc.; it is not
  installed by default, read the comments first (pwdauth.c)
- authentication programs run with empty environment for safety (pwauth.c)
- added missing fstat error checks (faillog.c, lastlog.c, setup.c, *io.c)
- common code separated from *io.c (commonio.c)
- ownership and permissions on password files are now preserved (we may try
  to make more use of setgid and setuid non-root programs in the future)
- added (untested) MD5-based crypt() from FreeBSD (md5crypt.c), see
  MD5_CRYPT in config.h.linux and MD5_CRYPT_ENAB in login.defs.linux
- termios/termio/sgtty macros cleaned up a bit

shadow-951218 => shadow-960129

Emergency bug fix release - no new features since 951218.  There are many
new changes, but this bug really can't wait until they are tested.

Probably all previous versions of the shadow suite have a serious bug which
makes it possible to overwrite the stack by entering very long username at
the login prompt.  This can give root access to any remote user!

Changed the maximum size in login.c from BUFSIZ (1024) to 32 (to match
size of the array in lmain.c).  Aaargh!!!

shadow-951203 => shadow-951218

Changes:
- Linux utmp handling fixes (utmp.c)
- last failure date printing fixes (failure.c)
- minor fix to compile with USE_CRACKLIB (obscure.c)
- eliminated the use of snprintf (env.c, lmain.c, login.c, shell.c, smain.c)
- basename.c added, replacing duplicated code in various places
- "su -" runs the shell with '-' in argv[0] again (smain.c)
- removing at/cron jobs cleaned up (userdel.c)
- /etc/gshadow should not be world-readable (sgroupio.c)
- if fflush() failed, files were not closed (*io.c)
- login prompt is now "hostname login: " on Linux (lmain.c, login.c)
- "save" and "restore" targets commented out (don't work) (Makefile.linux)
- some minor cleanups for gcc -Wall (unused variables etc.)
- removed README.FIRST (copyrights are OK now)
- updated ANNOUNCE, README.linux, WISHLIST
- as suggested, converted to RCS

shadow-3.3.2-951127 => shadow-951203-jfh

Changes:
- Added the BSD-style copyright to all of the files.  Any files with the
  old copyright have multiple copyright holders and need to be cleanroomed
  to produce BSD-style copyrightable files, or I need to get the consent
  of the others to change the copyright.
- Changed the ANNOUNCE file to not refer to the README.FIRST file.  Now
  that all of the files should have the correct copyright there is no need
  to refer to that e-mail message.
- Changes SCCS strings to "%W% %U% %G%".  Marek needs to either convert to
  RCS or check into SCCS and then checkout.  I'd suggest using RCS ;-)

  jfh@rpp386.cactus.org

shadow-3.3.2-951106 => shadow-951127

Note: for now this code only supports Linux.  All the #ifdef's are there
(and will be; support for at least SunOS 4.1.x would be nice) but:
- I had to fix some potential security problems resulting from sloppy
  coding (no bounds checking), and it was easier for me to use snprintf()
  (not available on many systems, unfortunately), I'll fix that later.
  Old versions of Linux libc don't have snprintf() either, and the one
  in libbsd.a ignores the max size - don't use it!  (libc-4.6.27 is OK)
- I am lazy and only updated Makefile.linux and config.h.linux this time
- I don't have root access to non-Linux systems (this means no testing)
- this code needs some major reorganization, which will (hopefully)
  make porting easier

Changes:
- some code cleanup, prototypes.h, defines.h, Makefile and config.h changes
- login can be statically linked (not that I think it's a good idea, better
  fix the telnetd, but paranoid people will like it :-)
- login is installed non-setuid by default
- check for NULL from getpass()
- wipe cleartext password from getpass() when no longer needed (pwauth.c)
- use standard "Password: " prompt by default (pwauth.c)
- hopefully fixed bogus sigaction() stuff (Linux only) (getpass.c)
- oops, setrlimit wants bytes, ulimit wants 512-byte units (lmain.c)
- Linux has <lastlog.h>
- print ll_host on Linux too (lmain.c)
- size checking in various places (setuid root programs, argh!)
- preserve TERM from getty (lmain.c)
- don't ignore SIGHUP (lmain.c)
- :%s/setenv/set_env/g (setenv(3) conflict) (env.c, lmain.c, login.c)
- remove LD_xxx (env.c)
- use bzero() instead of memset() for BSD portability and less #ifdef's
  (if the system has no bzero(), implement it as a macro using memset())
- the above fixes wrong order of memset() parameters (log.c)
- use getutent/pututline instead of doing it by hand (utmp.c)
- added the new settings to login.defs.linux
- added login_access.c to the distribution (not used yet)

==========

shadow-3.3.2 => shadow-3.3.2-951106

- added dummy pad.c and #ifdef'ed out references to pad_auth (pwauth.c)
- malloc/strdup error checking, hopefully no more core dumps...
- define HAVE_RLIMIT instead of HAVE_ULIMIT for Linux (config.h.linux)
- changed pathnames on Linux to conform to new FSSTND (/var/log etc.)
- larger buffer for cipher, for md5 crypt() if and when (encrypt.c, passwd.c)
- use POSIX termios whenever possible on Linux
- list.c, removed add_list/del_list from gpmain.c, user{add,del,mod}.c
- strtoday.c, removed duplicates from chage.c, useradd.c, usermod.c
- login -h only for root (lmain.c)
- login -r not needed for Linux (lmain.c)
- sample login.defs modified for Linux (login.defs.linux)
- swapped chfn USAGE and ADMUSAGE (chfn.c)
- added -u to passwd usage (passwd.c)
- no #! check necessary for Linux (shell.c)
- define OLD_CRON for some old incompatible Linux distributions (userdel.c)
- PASS_MAX is now 127 (not 8) for Linux (getpass.c)
- LOGIN_RETRIES, LOGIN_TIMEOUT, PASS_CHANGE_TRIES are no longer compiled in,
  can now be set in login.defs, old values are used as defaults (lmain.c)
- unique uid/gid selection now more robust (useradd.c, groupadd.c)
- UID_MIN, UID_MAX, GID_MIN, GID_MAX in login.defs (useradd.c, groupadd.c)
- CRACKLIB_DICTPATH no longer compiled in, can be set in login.defs (passwd.c)
- PASS_ALWAYS_WARN: warn about weak passwords even for root (passwd.c)
- PASS_MAX_LEN, check truncated passwords again (obscure.c)
- check for weak passwords too if previous password was empty (obscure.c)
- CHFN_RESTRICT: don't let users change their full names (chfn.c)
- Linux has getusershell(), use it (chsh.c)
- check if the new shell is executable by the user (chsh.c)
- sleep before printing "Login incorrect", not the other way around (lmain.c)
- don't be picky about utmp only if any of -rfh flags given (lmain.c)
- do "wheel group" more like BSD does (smain.c)
- use getlogin() in su (smain.c)
- UMASK from login.defs defaults to 077, not 0 (lmain.c, newusers.c)
- #undef HAS_ATRM for Linux until atrm can do what we need (config.h.linux)
- Linux has most commands in /usr/bin, not /bin (age.c, passwd.c, userdel.c)
- ULIMIT from login.defs works on systems using setrlimit() too (lmain.c)
- LOGIN_STRING should work now (pwauth.c, getdef.c)
- kludge to avoid conflict with Linux <shadow.h> (gshadow.h)
- mv Makefile Makefile.xenix ; mv config.h config.h.xenix - so that they are
  not lost when you copy the right ones to Makefile and config.h

==========

shadow-3.3.2

Original version, received directly from the author.