3 ImageMagick builds on a variety of Unix and Unix-like operating systems
4 including Linux, Solaris, FreeBSD, Mac OS X, and others. A compiler is
5 required and fortunately almost all modern Unix systems have one. Download
6 ImageMagick.tar.gz from ftp.imagemagick.org or its mirrors and verify the
7 distribution against its message digest.
9 Unpack the distribution it with this command:
11 $magick> tar xvfz ImageMagick.tar.gz
13 Now that you have the ImageMagick Unix/Linux source distribution unpacked,
18 The configure script looks at your environment and decides what it can cobble
19 together to get ImageMagick compiled and installed on your system. This
20 includes finding a compiler, where your compiler header files are located
21 (e.g. stdlib.h), and if any delegate libraries are available for ImageMagick
22 to use (e.g. JPEG, PNG, TIFF, etc.). If you are willing to accept configure's
23 default options, and build from within the source directory, you can simply
26 $magick> cd ImageMagick-7.0.0
29 Watch the configure script output to verify that it finds everything that
30 you think it should. Pay particular attention to the last lines of the script
31 output. For example, here is a recent report from our system:
33 ImageMagick is configured as follows. Please verify that this configuration
34 matches your expectations.
36 Host system type: x86_64-unknown-linux-gnu
37 Build system type: x86_64-unknown-linux-gnu
40 ----------------------------------------------------------------------------
41 Shared libraries --enable-shared=yes yes
42 Static libraries --enable-static=yes yes
43 Module support --with-modules=yes yes
44 GNU ld --with-gnu-ld=yes yes
45 Quantum depth --with-quantum-depth=16 16
46 High Dynamic Range Imagery
49 Delegate Configuration:
50 BZLIB --with-bzlib=yes yes
51 Autotrace --with-autotrace=yes yes
52 DJVU --with-djvu=yes no
54 FlashPIX --with-fpx=yes no
55 FontConfig --with-fontconfig=yes yes
56 FreeType --with-freetype=yes yes
57 GhostPCL None pcl6 (unknown)
58 GhostXPS None gxps (unknown)
59 Ghostscript None gs (8.63)
60 result_ghostscript_font_dir='none'
61 Ghostscript fonts --with-gs-font-dir=default
62 Ghostscript lib --with-gslib=yes no (failed tests)
63 Graphviz --with-gvc=yes yes
65 JPEG v1 --with-jpeg=yes yes
66 JPEG-2000 --with-jp2=yes yes
67 LCMS v1 --with-lcms=yes yes
68 LCMS v2 --with-lcms2=yes yes
70 Magick++ --with-magick-plus-plus=yes yes
71 OpenEXR --with-openexr=yes yes
72 PERL --with-perl=yes /usr/bin/perl
73 PNG --with-png=yes yes
74 RSVG --with-rsvg=yes yes
75 TIFF --with-tiff=yes yes
76 result_windows_font_dir='none'
77 Windows fonts --with-windows-font-dir=
78 WMF --with-wmf=yes yes
80 XML --with-xml=yes yes
81 ZLIB --with-zlib=yes yes
85 X_PRE_LIBS = -lSM -lICE
89 Options used to compile and link:
91 EXEC-PREFIX = /usr/local
94 CFLAGS = -fopenmp -g -O2 -Wall -W -pthread
95 MAGICK_CFLAGS = -fopenmp -g -O2 -Wall -W -pthread
96 CPPFLAGS = -I/usr/local/include/ImageMagick
98 DEFS = -DHAVE_CONFIG_H
100 MAGICK_LDFLAGS = -L/usr/local/lib -lfreetype
101 LIBS = -lMagickCore -llcms -ltiff -lfreetype -ljpeg
102 -lfontconfig -lXext -lSM -lICE -lX11 -lXt -lbz2 -lz
103 -lm -lgomp -lpthread -lltdl
105 CXXFLAGS = -g -O2 -Wall -W -pthread
107 You can influence choice of compiler, compilation flags, or libraries of the
108 configure script by setting initial values for variables in the configure
109 command line. These include, among others:
112 Name of C compiler (e.g. cc -Xa) to use.
115 Name of C++ compiler to use (e.g. CC).
118 Compiler flags (e.g. -g -O2) to compile C code.
121 Compiler flags (e.g. -g -O2) to compile C++ code.
124 Include paths (.e.g. -I/usr/local) to look for header files.
127 Library paths (.e.g. -L/usr/local) to look for libraries systems that
128 support the notion of a library run-path may require an additional
129 argument in order to find shared libraries at run time. For example,
130 the Solaris linker requires an argument of the form -R/path. Some
131 Linux systems will work with -rpath /usr/local/lib, while some other
132 Linux systems who's gcc does not pass -rpath to the linker, require
133 an argument of the form -Wl,-rpath,/usr/local/lib.
136 Extra libraries (.e.g. -l/usr/local/lib) required to link.
138 Here is an example of setting configure variables from the command line:
140 $magick> ./configure CC=c99 CFLAGS=-O2 LIBS=-lposix
142 Any variable (e.g. CPPFLAGS or LDFLAGS) which requires a directory path must
143 specify an absolute path rather than a relative path.
145 Configure can usually find the X include and library files automagically,
146 but if it doesn't, you can use the --x-includes=path and --x-libraries=path
147 options to specify their locations.
149 The configure script provides a number of ImageMagick specific
150 options. When disabling an option --disable-something is equivalent to
151 specifying --enable-something=no and --without-something is equivalent to
152 --with-something=no. The configure options are as follows (execute configure
153 --help to see all options).
155 ImageMagick options represent either features to be enabled, disabled,
156 or packages to be included in the build. When a feature is enabled (via
157 --enable-something), it enables code already present in ImageMagick. When a
158 package is enabled (via --with-something), the configure script will search
159 for it, and if is properly installed and ready to use (headers and built
160 libraries are found by compiler) it will be included in the build. The
161 configure script is delivered with all features disabled and all packages
162 enabled. In general, the only reason to disable a package is if a package
163 exists but it is unsuitable for the build (perhaps an old version or not
164 compiled with the right compilation flags).
166 Here are the optional features you can configure:
169 build the shared libraries and support for loading coder and process
170 modules. Shared libraries are preferred because they allow programs
171 to share common code, making the individual programs much smaller. In
172 addition shared libraries are required in order for PerlMagick to be
173 dynamically loaded by an installed PERL (otherwise an additional PERL
174 (PerlMagick) must be installed.
176 ImageMagick built with delegates (see MAGICK PLUG-INS below) can pose
177 additional challenges. If ImageMagick is built using static libraries (the
178 default without --enable-shared) then delegate libraries may be built as
179 either static libraries or shared libraries. However, if ImageMagick is
180 built using shared libraries, then all delegate libraries must also be
181 built as shared libraries. Static libraries usually have the extension
182 .a, while shared libraries typically have extensions like .so, .sa, or
183 .dll. Code in shared libraries normally must compiled using a special
184 compiler option to produce Position Independent Code (PIC). The only
185 time this not necessary is if the platform compiles code as PIC by
188 PIC compilation flags differ from vendor to vendor (gcc's is
189 -fPIC). However, you must compile all shared library source with the
190 same flag (for gcc use -fPIC rather than -fpic). While static libraries
191 are normally created using an archive tool like ar, shared libraries
192 are built using special linker or compiler options (e.g. -shared for gcc).
194 If --enable-shared is not specified, a new PERL interpreter (PerlMagick)
195 is built which is statically linked against the PerlMagick extension. This
196 new interpreter is installed into the same directory as the ImageMagick
197 utilities. If --enable-shared is specified, the PerlMagick extension is
198 built as a dynamically loadable object which is loaded into your current
199 PERL interpreter at run-time. Use of dynamically-loaded extensions is
200 preferable over statically linked extensions so use --enable-shared if
201 possible (note that all libraries used with ImageMagick must be shared
205 static archive libraries (with extension .a) are not built. If you
206 are building shared libraries, there is little value to building static
207 libraries. Reasons to build static libraries include: 1) they can be
208 easier to debug; 2) clients do not have external dependencies (i.e.
209 libMagick.so); 3) building PIC versions of the delegate libraries may
210 take additional expertise and effort; 4) you are unable to build shared
214 disable building an installed ImageMagick (default enabled).
216 By default the ImageMagick build is configured to formally install
217 into a directory tree. This the most secure and reliable way to install
218 ImageMagick. Use this option to configure ImageMagick so that it doesn't
219 use hard-coded paths and locates support files by computing an offset path
220 from the executable (or from the location specified by the MAGICK_HOME
221 environment variable. The uninstalled configuration is ideal for binary
222 distributions which are expected to extract and run in any location.
225 enable 'ccmalloc' memory debug support (default disabled).
228 enable 'prof' profiling support (default disabled).
231 enable 'gprof' profiling support (default disabled).
235 enable 'gcov' profiling support (default disabled).
237 disable OpenMP (default enabled).
239 Certain ImageMagick algorithms, for example convolution, can achieve
240 a significant speed-up with the assistance of the OpenMP API when
241 running on modern dual and quad-core processors.
244 disable support for large (64 bit) file offsets.
246 By default, ImageMagick is compiled with support for large files (>
247 2GB on a 32-bit CPU) if the operating system supports large files. Some
248 applications which use the ImageMagick library may also require support
249 for large files. By disabling support for large files via
250 --disable-largefile, dependent applications do not require special
251 compilation options for large files in order to use the library.
253 Here are the optional packages you can configure:
255 --enable-legacy-support
256 install legacy command-line utilities (default disabled).
259 number of bits in a pixel quantum (default 16).
261 Use this option to specify the number of bits to use per pixel quantum
262 (the size of the red, green, blue, and alpha pixel components). For
263 example, --with-quantum-depth=8 builds ImageMagick using 8-bit quantums.
264 Most computer display adapters use 8-bit quantums. Currently supported
265 arguments are 8, 16, or 32. We recommend the default of 16 because
266 some image formats support 16 bits-per-pixel. However, this option is
267 important in determining the overall run-time performance of ImageMagick.
269 The number of bits in a quantum determines how many values it may
270 contain. Each quantum level supports 256 times as many values as the
271 previous level. The following table shows the range available for various
274 Quantum Depth Valid Range (Decimal) Valid Range (Hex)
277 32 0-4294967295 00000000-FFFFFFFF
279 Larger pixel quantums can cause ImageMagick to run more slowly and to
280 require more memory. For example, using sixteen-bit pixel quantums can
281 cause ImageMagick to run 15% to 50% slower (and take twice as much memory)
282 than when it is built to support eight-bit pixel quantums.
284 The amount of virtual memory consumed by an image can be computed by
285 the equation (5 * Quantum Depth * Rows * Columns) / 8. This an important
286 consideration when resources are limited, particularly since processing
287 an image may require several images to be in memory at one time. The
288 following table shows memory consumption values for a 1024x768 image:
290 Quantum Depth Virtual Memory
296 accurately represent the wide range of intensity levels (experimental).
298 --enable-osx-universal-binary
299 build a universal binary on OS X.
302 disable support for dynamically loadable modules.
304 Image coders and process modules are built as loadable modules which are
305 installed under the directory [prefix]/lib/ImageMagick-X.X.X/modules-QN
306 (where 'N' equals 8, 16, or 32 depending on the quantum depth) in the
307 subdirectories coders and filters respectively. The modules build option
308 is only available in conjunction with --enable-shared. If --enable-shared
309 is not also specified, support for building modules is disabled. Note that
310 if --enable-shared and --disable-modules are specified, the module loader
311 is active (allowing extending an installed ImageMagick by simply copying
312 a module into place) but ImageMagick itself is not built using modules.
315 set pixel cache threshold (defaults to available memory).
317 Specify a different image pixel cache threshold with this option. This
318 sets the maximum amount of heap memory that ImageMagick is allowed to
319 consume before switching to using memory-mapped temporary files to store
323 disable threads support.
325 By default, the ImageMagick library is compiled with multi-thread
326 support. If this undesirable, specify --without-threads.
329 enable frozen delegate paths.
331 Normally, external program names are substituted into the delegates.xml
332 configuration file without full paths. Specify this option to enable
333 saving full paths to programs using locations determined by configure.
334 This useful for environments where programs are stored under multiple
335 paths, and users may use different PATH settings than the person who
338 --without-magick-plus-plus
339 disable build/install of Magick++.
341 Disable building Magick++, the C++ application programming interface
342 to ImageMagick. A suitable C++ compiler is required in order to build
343 Magick++. Specify the CXX configure variable to select the C++ compiler
344 to use (default g++), and CXXFLAGS to select the desired compiler
345 optimization and debug flags (default -g -O2). Antique C++ compilers
346 will normally be rejected by configure tests so specifying this option
347 should only be necessary if Magick++ fails to compile.
350 disable build/install of PerlMagick, or
352 By default, PerlMagick is conveniently compiled and installed as part
353 of ImageMagick's normal configure, make, sudo make install process. When
354 --without-perl is specified, you must first install ImageMagick, change to
355 the PerlMagick subdirectory, build, and finally install PerlMagick. Note,
356 PerlMagick is configured even if --without-perl is specified. If the
357 argument --with-perl=/path/to/perl is supplied, /../path/to/perl is be
358 taken as the PERL interpreter to use. This important in case the perl
359 executable in your PATH is not PERL5, or is not the PERL you want to use.
362 use specified Perl binary to configure PerlMagick.
364 --with-perl-options=OPTIONS
365 options to pass on command-line when generating PerlMagick's Makefile
368 The PerlMagick module is normally installed using the Perl interpreter's
369 installation PREFIX, rather than ImageMagick's. If ImageMagick's
370 installation prefix is not the same as PERL's PREFIX, then you
371 may find that PerlMagick's sudo make install step tries to install
372 into a directory tree that you don't have write permissions to. This
373 common when PERL is delivered with the operating system or on Internet
374 Service Provider (ISP) web servers. If you want PerlMagick to install
375 elsewhere, then provide a PREFIX option to PERL's configuration step
376 via "--with-perl-options=PREFIX=/some/place". Other options accepted by
377 MakeMaker are 'LIB', 'LIBPERL_A', 'LINKTYPE', and 'OPTIMIZE'. See the
378 ExtUtils::MakeMaker(3) manual page for more information on configuring
382 disable BZLIB support.
385 disable Display Postscript support.
388 enable FlashPIX support.
391 disable TrueType support.
394 enable Ghostscript library support.
397 disable JBIG support.
400 disable JPEG support.
403 disable JPEG v2 support.
406 disable lcms (v1.1X) support
409 disable lcms (v2.X) support
412 disable LZMA support.
418 disable TIFF support.
424 prepend to default font search path.
427 directory containing Ghostscript fonts.
429 Specify the directory containing the Ghostscript Postscript Type 1 font
430 files (e.g. n022003l.pfb) so that they can be rendered using the FreeType
431 library. If the font files are installed using the default Ghostscript
432 installation paths (${prefix}/share/ghostscript/fonts), they should
433 be discovered automagically by configure and specifying this option is
434 not necessary. Specify this option if the Ghostscript fonts fail to be
435 located automagically, or the location needs to be overridden.
437 --with-windows-font-dir
438 directory containing MS-Windows fonts.
440 Specify the directory containing MS-Windows-compatible fonts. This not
441 necessary when ImageMagick is running under MS-Windows.
447 disable ZLIB support.
450 don't use the X Window System.
452 By default, ImageMagick uses the X11 delegate libraries if they are
453 available. When --without-x is specified, use of X11 is disabled. The
454 display, animate, and import sub-commands are not included. The remaining
455 sub-commands have reduced functionality such as no access to X11 fonts
456 (consider using Postscript or TrueType fonts instead).
458 --with-share-path=DIR
459 Alternate path to share directory (default share/ImageMagick).
462 use libstdc++ in DIR (for GNU C++).
464 While configure is designed to ease installation of ImageMagick, it often
465 discovers problems that would otherwise be encountered later when compiling
466 ImageMagick. The configure script tests for headers and libraries by
467 executing the compiler (CC) with the specified compilation flags (CFLAGS),
468 pre-processor flags (CPPFLAGS), and linker flags (LDFLAGS). Any errors are
469 logged to the file config.log. If configure fails to discover a header or
470 library please review this log file to determine why, however, please be
471 aware that *errors in the config.log are normal* because configure works by
472 trying something and seeing if it fails. An error in config.log is only a
473 problem if the test should have passed on your system.
475 Common causes of configure failures are: 1) a delegate header is not in the
476 header include path (CPPFLAGS -I option); 2) a delegate library is not in
477 the linker search/run path (LDFLAGS -L/-R option); 3) a delegate library is
478 missing a function (old version?); or 4) compilation environment is faulty.
480 If all reasonable corrective actions have been tried and the problem appears
481 be due to a flaw in the configure script, please send a bug report to the
482 ImageMagick Defect Support Forum. All bug reports should contain the operating
483 system type (as reported by uname -a) and the compiler/compiler-version. A
484 copy of the configure script output and/or the relevant portion of config.log
485 file may be valuable in order to find the problem. If you post portions
486 of config.log, please also send a script of the configure output and a
487 description of what you expected to see (and why) so the failure you are
488 observing can be identified and resolved.
490 ImageMagick is now configured and ready to build
494 Once ImageMagick is configured, these standard build targets are available
495 from the generated make files:
504 Run tests using the installed ImageMagick (sudo make install must be
505 done first). Ghostscript is a prerequisite, otherwise the EPS, PS,
506 and PDF tests will fail.
509 Remove everything in the build directory created by make.
512 remove everything in the build directory created by configure and
513 make. This useful if you want to start over from scratch.
516 Remove all files from the system which are (or would be) installed by sudo
517 make install using the current configuration. Note that this target is
518 imperfect for PerlMagick since Perl no longer supports an uninstall
521 In most cases you will simply wand to compile ImageMagick with this command:
525 Once built, you can optionally install ImageMagick on your system as
530 Now that ImageMagick is configured and built, type:
532 $magick> make install
536 By default, ImageMagick is installs binaries in /../usr/local/bin, libraries
537 in /../usr/local/lib, header files in /../usr/local/include and documentation
538 in /../usr/local/share. You can specify an alternative installation prefix
539 other than /../usr/local by giving configure the option --prefix=PATH. This
540 valuable in case you don't have privileges to install under the default
541 paths or if you want to install in the system directories instead.
543 To confirm your installation of the ImageMagick distribution was successful,
544 ensure that the installation directory is in your executable search path
549 The ImageMagick logo is displayed on your X11 display.
551 To verify the ImageMagick build configuration, type:
553 $magick> identify -list configure
555 To list which image formats are supported , type:
557 $magick> identify -list format
559 For a more comprehensive test, you run the ImageMagick test suite by typing:
563 Ghostscript is a prerequisite, otherwise the EPS, PS, and PDF tests will
564 fail. Note that due to differences between the developer's environment and
565 your own it is possible that a few tests may fail even though the results are
566 ok. Differences between the developer's environment environment and your own
567 may include the compiler, the CPU type, and the library versions used. The
568 ImageMagick developers use the current release of all dependent libraries.
570 Linux-specific Build instructions
572 Download ImageMagick.src.rpm from ftp.imagemagick.org or its mirrors and
573 verify the distribution against its message digest.
575 Build ImageMagick with this command:
577 $magick> rpmbuild --rebuild ImageMagick.src.rpm
579 After the build you, locate the RPMS folder and install the ImageMagick
580 binary RPM distribution:
582 $magick> rpm -ivh ImageMagick-7.0.0-?.*.rpm
584 MinGW-specific Build instructions
586 Although you can download and install delegate libraries yourself, many
587 are already available in the GnuWin32 distribution. Download and install
588 whichever delegate libraries you require such as JPEG, PNG, TIFF, etc. Make
589 sure you specify the development headers when you install a package. Next
592 $magick> tar jxvf ImageMagick-7.0.0-?.tar.bz2
593 $magick> cd ImageMagick-7.0.0
594 $magick> export CPPFLAGS="-Ic:/Progra~1/GnuWin32/include"
595 $magick> export LDFLAGS="-Lc:/Progra~1/GnuWin32/lib"
596 $magick> ./configure --without-perl
597 $magick> make $magick> sudo make install
599 Dealing with Unexpected Problems
601 Chances are the download, configure, build, and install of ImageMagick went
602 flawlessly as it is intended, however, certain systems and environments may
603 cause one or more steps to fail. We discuss a few problems we've run across
604 and how to take corrective action to ensure you have a working release
609 If the build complains about missing dependencies (e.g. .deps/source.PLO),
610 add --disable-dependency-tracking to your configure command line.
612 Some systems may fail to link at build time due to unresolved symbols. Try
613 adding the LDFLAGS to the configure command line:
615 $magick> configure LDFLAGS='-L/usr/local/lib -R/usr/local/lib'
617 Dynamic Linker Run-time Bindings
619 On some systems, ImageMagick may not find its shared library, libMagick.so. Try
620 running the ldconfig with the library path:
622 $magick> /sbin/ldconfig /usr/local/lib
624 Solaris and Linux systems have the ldd command which is useful to track which
625 libraries ImageMagick depends on:
627 $magick> ldd `which convert`
631 On occasion you may receive these warnings:
633 no decode delegate for this image format
634 no encode delegate for this image format
636 This exception indicates that an external delegate library or its headers
637 were not available when ImageMagick was built. To add support for the image
638 format, download and install the requisite delegate library and its header
639 files and reconfigure, rebuild, and reinstall ImageMagick. As an example,
640 lets add support for the JPEG image format. First we install the JPEG RPMS:
642 $magick> yum install libjpeg libjpeg-devel
644 Now reconfigure, rebuild, and reinstall ImageMagick. To verify JPEG is now
645 properly supported within ImageMagick, use this command:
647 $magick> identify -list format
649 You should see a mode of rw- associated with the JPEG tag. This mode means
650 the image can be read or written and can only support one image per image
655 If PerlMagick fails to link with a message similar to libperl.a is not found,
656 rerun configure with the --enable-shared or --enable-shared --with-modules