3 ImageMagick builds on a variety of Unix and Unix-like operating systems
4 including Linux, Solaris, FreeBSD, Mac OS X, and others. A compiler is
5 required and fortunately almost all modern Unix systems have one. Download
6 ImageMagick.tar.gz from ftp.imagemagick.org or its mirrors and verify the
7 distribution against its message digest.
9 Unpack the distribution it with this command:
11 $magick> tar xvfz ImageMagick.tar.gz
13 Now that you have the ImageMagick Unix/Linux source distribution unpacked,
18 The configure script looks at your environment and decides what it can cobble
19 together to get ImageMagick compiled and installed on your system. This
20 includes finding a compiler, where your compiler header files are located
21 (e.g. stdlib.h), and if any delegate libraries are available for ImageMagick
22 to use (e.g. JPEG, PNG, TIFF, etc.). If you are willing to accept configure's
23 default options, and build from within the source directory, you can simply
26 $magick> cd ImageMagick-7.0.0
29 Watch the configure script output to verify that it finds everything that
30 you think it should. Pay particular attention to the last lines of the script
31 output. For example, here is a recent report from our system:
33 ImageMagick is configured as follows. Please verify that this configuration
34 matches your expectations.
36 Host system type: x86_64-unknown-linux-gnu
37 Build system type: x86_64-unknown-linux-gnu
40 ----------------------------------------------------------------------------
41 Shared libraries --enable-shared=yes yes
42 Static libraries --enable-static=yes yes
43 Module support --with-modules=yes yes
44 GNU ld --with-gnu-ld=yes yes
45 Quantum depth --with-quantum-depth=16 16
46 High Dynamic Range Imagery
49 Delegate Configuration:
50 BZLIB --with-bzlib=yes yes
51 Autotrace --with-autotrace=yes yes
52 DJVU --with-djvu=yes no
54 FlashPIX --with-fpx=yes no
55 FontConfig --with-fontconfig=yes yes
56 FreeType --with-freetype=yes yes
57 GhostPCL None pcl6 (unknown)
58 GhostXPS None gxps (unknown)
59 Ghostscript None gs (8.63)
60 result_ghostscript_font_dir='none'
61 Ghostscript fonts --with-gs-font-dir=default
62 Ghostscript lib --with-gslib=yes no (failed tests)
63 Graphviz --with-gvc=yes yes
65 JPEG v1 --with-jpeg=yes yes
66 JPEG-2000 --with-jp2=yes yes
67 LCMS v1 --with-lcms=yes yes
68 LCMS v2 --with-lcms2=yes yes
70 Magick++ --with-magick-plus-plus=yes yes
71 OpenEXR --with-openexr=yes yes
72 PERL --with-perl=yes /usr/bin/perl
73 PNG --with-png=yes yes
74 RSVG --with-rsvg=yes yes
75 TIFF --with-tiff=yes yes
76 result_windows_font_dir='none'
77 Windows fonts --with-windows-font-dir=
78 WMF --with-wmf=yes yes
80 XML --with-xml=yes yes
81 ZLIB --with-zlib=yes yes
85 X_PRE_LIBS = -lSM -lICE
89 Options used to compile and link:
91 EXEC-PREFIX = /usr/local
94 CFLAGS = -fopenmp -g -O2 -Wall -W -pthread
95 MAGICK_CFLAGS = -fopenmp -g -O2 -Wall -W -pthread
96 CPPFLAGS = -I/usr/local/include/ImageMagick
98 DEFS = -DHAVE_CONFIG_H
100 MAGICK_LDFLAGS = -L/usr/local/lib -lfreetype
101 LIBS = -lMagickCore -llcms -ltiff -lfreetype -ljpeg
102 -lfontconfig -lXext -lSM -lICE -lX11 -lXt -lbz2 -lz
103 -lm -lgomp -lpthread -lltdl
105 CXXFLAGS = -g -O2 -Wall -W -pthread
107 You can influence choice of compiler, compilation flags, or libraries of the
108 configure script by setting initial values for variables in the configure
109 command line. These include, among others:
112 Name of C compiler (e.g. cc -Xa) to use.
115 Name of C++ compiler to use (e.g. CC).
118 Compiler flags (e.g. -g -O2) to compile C code.
121 Compiler flags (e.g. -g -O2) to compile C++ code.
124 Include paths (.e.g. -I/usr/local) to look for header files.
127 Library paths (.e.g. -L/usr/local) to look for libraries systems that
128 support the notion of a library run-path may require an additional
129 argument in order to find shared libraries at run time. For example,
130 the Solaris linker requires an argument of the form -R/path. Some
131 Linux systems will work with -rpath /usr/local/lib, while some other
132 Linux systems who's gcc does not pass -rpath to the linker, require
133 an argument of the form -Wl,-rpath,/usr/local/lib.
136 Extra libraries (.e.g. -l/usr/local/lib) required to link.
138 Here is an example of setting configure variables from the command line:
140 $magick> ./configure CC=c99 CFLAGS=-O2 LIBS=-lposix
142 Any variable (e.g. CPPFLAGS or LDFLAGS) which requires a directory path must
143 specify an absolute path rather than a relative path.
145 Configure can usually find the X include and library files automagically,
146 but if it doesn't, you can use the --x-includes=path and --x-libraries=path
147 options to specify their locations.
149 The configure script provides a number of ImageMagick specific
150 options. When disabling an option --disable-something is equivalent to
151 specifying --enable-something=no and --without-something is equivalent to
152 --with-something=no. The configure options are as follows (execute configure
153 --help to see all options).
155 ImageMagick options represent either features to be enabled, disabled,
156 or packages to be included in the build. When a feature is enabled (via
157 --enable-something), it enables code already present in ImageMagick. When a
158 package is enabled (via --with-something), the configure script will search
159 for it, and if is properly installed and ready to use (headers and built
160 libraries are found by compiler) it will be included in the build. The
161 configure script is delivered with all features disabled and all packages
162 enabled. In general, the only reason to disable a package is if a package
163 exists but it is unsuitable for the build (perhaps an old version or not
164 compiled with the right compilation flags).
166 Here are the optional features you can configure:
169 build the shared libraries and support for loading coder and process
170 modules. Shared libraries are preferred because they allow programs
171 to share common code, making the individual programs much smaller. In
172 addition shared libraries are required in order for PerlMagick to be
173 dynamically loaded by an installed PERL (otherwise an additional PERL
174 (PerlMagick) must be installed.
176 ImageMagick built with delegates (see MAGICK PLUG-INS below) can pose
177 additional challenges. If ImageMagick is built using static libraries (the
178 default without --enable-shared) then delegate libraries may be built as
179 either static libraries or shared libraries. However, if ImageMagick is
180 built using shared libraries, then all delegate libraries must also be
181 built as shared libraries. Static libraries usually have the extension
182 .a, while shared libraries typically have extensions like .so, .sa, or
183 .dll. Code in shared libraries normally must compiled using a special
184 compiler option to produce Position Independent Code (PIC). The only
185 time this not necessary is if the platform compiles code as PIC by
188 PIC compilation flags differ from vendor to vendor (gcc's is
189 -fPIC). However, you must compile all shared library source with the
190 same flag (for gcc use -fPIC rather than -fpic). While static libraries
191 are normally created using an archive tool like ar, shared libraries
192 are built using special linker or compiler options (e.g. -shared for gcc).
194 If --enable-shared is not specified, a new PERL interpreter (PerlMagick)
195 is built which is statically linked against the PerlMagick extension. This
196 new interpreter is installed into the same directory as the ImageMagick
197 utilities. If --enable-shared is specified, the PerlMagick extension is
198 built as a dynamically loadable object which is loaded into your current
199 PERL interpreter at run-time. Use of dynamically-loaded extensions is
200 preferable over statically linked extensions so use --enable-shared if
201 possible (note that all libraries used with ImageMagick must be shared
205 static archive libraries (with extension .a) are not built. If you
206 are building shared libraries, there is little value to building static
207 libraries. Reasons to build static libraries include: 1) they can be
208 easier to debug; 2) clients do not have external dependencies (i.e.
209 libMagick.so); 3) building PIC versions of the delegate libraries may
210 take additional expertise and effort; 4) you are unable to build shared
214 disable building an installed ImageMagick (default enabled).
216 By default the ImageMagick build is configured to formally install
217 into a directory tree. This the most secure and reliable way to install
218 ImageMagick. Use this option to configure ImageMagick so that it doesn't
219 use hard-coded paths and locates support files by computing an offset path
220 from the executable (or from the location specified by the MAGICK_HOME
221 environment variable. The uninstalled configuration is ideal for binary
222 distributions which are expected to extract and run in any location.
225 enable 'ccmalloc' memory debug support (default disabled).
228 enable 'prof' profiling support (default disabled).
231 enable 'gprof' profiling support (default disabled).
235 enable 'gcov' profiling support (default disabled).
237 disable OpenMP (default enabled).
239 Certain ImageMagick algorithms, for example convolution, can achieve
240 a significant speed-up with the assistance of the OpenMP API when
241 running on modern dual and quad-core processors.
244 disable support for large (64 bit) file offsets.
246 By default, ImageMagick is compiled with support for large files (>
247 2GB on a 32-bit CPU) if the operating system supports large files. Some
248 applications which use the ImageMagick library may also require support
249 for large files. By disabling support for large files via
250 --disable-largefile, dependent applications do not require special
251 compilation options for large files in order to use the library.
253 Here are the optional packages you can configure:
255 --enable-legacy-support
256 install legacy command-line utilities (default disabled).
259 number of bits in a pixel quantum (default 16).
261 Use this option to specify the number of bits to use per pixel quantum
262 (the size of the red, green, blue, and alpha pixel components). For
263 example, --with-quantum-depth=8 builds ImageMagick using 8-bit quantums.
264 Most computer display adapters use 8-bit quantums. Currently supported
265 arguments are 8, 16, or 32. We recommend the default of 16 because
266 some image formats support 16 bits-per-pixel. However, this option is
267 important in determining the overall run-time performance of ImageMagick.
269 The number of bits in a quantum determines how many values it may
270 contain. Each quantum level supports 256 times as many values as the
271 previous level. The following table shows the range available for various
274 Quantum Depth Valid Range (Decimal) Valid Range (Hex)
277 32 0-4294967295 00000000-FFFFFFFF
279 Larger pixel quantums can cause ImageMagick to run more slowly and to
280 require more memory. For example, using sixteen-bit pixel quantums can
281 cause ImageMagick to run 15% to 50% slower (and take twice as much memory)
282 than when it is built to support eight-bit pixel quantums.
284 The amount of virtual memory consumed by an image can be computed by
285 the equation (5 * Quantum Depth * Rows * Columns) / 8. This an important
286 consideration when resources are limited, particularly since processing
287 an image may require several images to be in memory at one time. The
288 following table shows memory consumption values for a 1024x768 image:
290 Quantum Depth Virtual Memory
296 accurately represent the wide range of intensity levels (experimental).
298 --enable-osx-universal-binary
299 build a universal binary on OS X.
302 disable support for dynamically loadable modules.
304 Image coders and process modules are built as loadable modules which are
305 installed under the directory [prefix]/lib/ImageMagick-X.X.X/modules-QN
306 (where 'N' equals 8, 16, or 32 depending on the quantum depth) in the
307 subdirectories coders and filters respectively. The modules build option
308 is only available in conjunction with --enable-shared. If --enable-shared
309 is not also specified, support for building modules is disabled. Note that
310 if --enable-shared and --disable-modules are specified, the module loader
311 is active (allowing extending an installed ImageMagick by simply copying
312 a module into place) but ImageMagick itself is not built using modules.
315 set pixel cache threshold (defaults to available memory).
317 Specify a different image pixel cache threshold with this option. This
318 sets the maximum amount of heap memory that ImageMagick is allowed to
319 consume before switching to using memory-mapped temporary files to store
323 disable threads support.
325 By default, the ImageMagick library is compiled with multi-thread
326 support. If this undesirable, specify --without-threads.
329 enable frozen delegate paths.
331 Normally, external program names are substituted into the delegates.xml
332 configuration file without full paths. Specify this option to enable
333 saving full paths to programs using locations determined by configure.
334 This useful for environments where programs are stored under multiple
335 paths, and users may use different PATH settings than the person who
338 --without-magick-plus-plus
339 disable build/install of Magick++.
341 Disable building Magick++, the C++ application programming interface
342 to ImageMagick. A suitable C++ compiler is required in order to build
343 Magick++. Specify the CXX configure variable to select the C++ compiler
344 to use (default g++), and CXXFLAGS to select the desired compiler
345 optimization and debug flags (default -g -O2). Antique C++ compilers
346 will normally be rejected by configure tests so specifying this option
347 should only be necessary if Magick++ fails to compile.
349 --with-package-release-name
350 encode this name into the shared library name (see libtools -release
354 disable build/install of PerlMagick, or
356 By default, PerlMagick is conveniently compiled and installed as part
357 of ImageMagick's normal configure, make, sudo make install process. When
358 --without-perl is specified, you must first install ImageMagick, change to
359 the PerlMagick subdirectory, build, and finally install PerlMagick. Note,
360 PerlMagick is configured even if --without-perl is specified. If the
361 argument --with-perl=/path/to/perl is supplied, /../path/to/perl is be
362 taken as the PERL interpreter to use. This important in case the perl
363 executable in your PATH is not PERL5, or is not the PERL you want to use.
366 use specified Perl binary to configure PerlMagick.
368 --with-perl-options=OPTIONS
369 options to pass on command-line when generating PerlMagick's Makefile
372 The PerlMagick module is normally installed using the Perl interpreter's
373 installation PREFIX, rather than ImageMagick's. If ImageMagick's
374 installation prefix is not the same as PERL's PREFIX, then you
375 may find that PerlMagick's sudo make install step tries to install
376 into a directory tree that you don't have write permissions to. This
377 common when PERL is delivered with the operating system or on Internet
378 Service Provider (ISP) web servers. If you want PerlMagick to install
379 elsewhere, then provide a PREFIX option to PERL's configuration step
380 via "--with-perl-options=PREFIX=/some/place". Other options accepted by
381 MakeMaker are 'LIB', 'LIBPERL_A', 'LINKTYPE', and 'OPTIMIZE'. See the
382 ExtUtils::MakeMaker(3) manual page for more information on configuring
386 disable BZLIB support.
389 disable Display Postscript support.
392 enable FlashPIX support.
395 disable TrueType support.
398 enable Ghostscript library support.
401 disable JBIG support.
404 disable JPEG support.
407 disable JPEG v2 support.
410 disable lcms (v1.1X) support
413 disable lcms (v2.X) support
416 disable LZMA support.
422 disable TIFF support.
428 prepend to default font search path.
431 directory containing Ghostscript fonts.
433 Specify the directory containing the Ghostscript Postscript Type 1 font
434 files (e.g. n022003l.pfb) so that they can be rendered using the FreeType
435 library. If the font files are installed using the default Ghostscript
436 installation paths (${prefix}/share/ghostscript/fonts), they should
437 be discovered automagically by configure and specifying this option is
438 not necessary. Specify this option if the Ghostscript fonts fail to be
439 located automagically, or the location needs to be overridden.
441 --with-windows-font-dir
442 directory containing MS-Windows fonts.
444 Specify the directory containing MS-Windows-compatible fonts. This not
445 necessary when ImageMagick is running under MS-Windows.
451 disable ZLIB support.
454 don't use the X Window System.
456 By default, ImageMagick uses the X11 delegate libraries if they are
457 available. When --without-x is specified, use of X11 is disabled. The
458 display, animate, and import sub-commands are not included. The remaining
459 sub-commands have reduced functionality such as no access to X11 fonts
460 (consider using Postscript or TrueType fonts instead).
462 --with-share-path=DIR
463 Alternate path to share directory (default share/ImageMagick).
466 use libstdc++ in DIR (for GNU C++).
468 While configure is designed to ease installation of ImageMagick, it often
469 discovers problems that would otherwise be encountered later when compiling
470 ImageMagick. The configure script tests for headers and libraries by
471 executing the compiler (CC) with the specified compilation flags (CFLAGS),
472 pre-processor flags (CPPFLAGS), and linker flags (LDFLAGS). Any errors are
473 logged to the file config.log. If configure fails to discover a header or
474 library please review this log file to determine why, however, please be
475 aware that *errors in the config.log are normal* because configure works by
476 trying something and seeing if it fails. An error in config.log is only a
477 problem if the test should have passed on your system.
479 Common causes of configure failures are: 1) a delegate header is not in the
480 header include path (CPPFLAGS -I option); 2) a delegate library is not in
481 the linker search/run path (LDFLAGS -L/-R option); 3) a delegate library is
482 missing a function (old version?); or 4) compilation environment is faulty.
484 If all reasonable corrective actions have been tried and the problem appears
485 be due to a flaw in the configure script, please send a bug report to the
486 ImageMagick Defect Support Forum. All bug reports should contain the operating
487 system type (as reported by uname -a) and the compiler/compiler-version. A
488 copy of the configure script output and/or the relevant portion of config.log
489 file may be valuable in order to find the problem. If you post portions
490 of config.log, please also send a script of the configure output and a
491 description of what you expected to see (and why) so the failure you are
492 observing can be identified and resolved.
494 ImageMagick is now configured and ready to build
498 Once ImageMagick is configured, these standard build targets are available
499 from the generated make files:
508 Run tests using the installed ImageMagick (sudo make install must be
509 done first). Ghostscript is a prerequisite, otherwise the EPS, PS,
510 and PDF tests will fail.
513 Remove everything in the build directory created by make.
516 remove everything in the build directory created by configure and
517 make. This useful if you want to start over from scratch.
520 Remove all files from the system which are (or would be) installed by sudo
521 make install using the current configuration. Note that this target is
522 imperfect for PerlMagick since Perl no longer supports an uninstall
525 In most cases you will simply wand to compile ImageMagick with this command:
529 Once built, you can optionally install ImageMagick on your system as
534 Now that ImageMagick is configured and built, type:
536 $magick> make install
540 By default, ImageMagick is installs binaries in /../usr/local/bin, libraries
541 in /../usr/local/lib, header files in /../usr/local/include and documentation
542 in /../usr/local/share. You can specify an alternative installation prefix
543 other than /../usr/local by giving configure the option --prefix=PATH. This
544 valuable in case you don't have privileges to install under the default
545 paths or if you want to install in the system directories instead.
547 To confirm your installation of the ImageMagick distribution was successful,
548 ensure that the installation directory is in your executable search path
553 The ImageMagick logo is displayed on your X11 display.
555 To verify the ImageMagick build configuration, type:
557 $magick> identify -list configure
559 To list which image formats are supported , type:
561 $magick> identify -list format
563 For a more comprehensive test, you run the ImageMagick test suite by typing:
567 Ghostscript is a prerequisite, otherwise the EPS, PS, and PDF tests will
568 fail. Note that due to differences between the developer's environment and
569 your own it is possible that a few tests may fail even though the results are
570 ok. Differences between the developer's environment environment and your own
571 may include the compiler, the CPU type, and the library versions used. The
572 ImageMagick developers use the current release of all dependent libraries.
574 Linux-specific Build instructions
576 Download ImageMagick.src.rpm from ftp.imagemagick.org or its mirrors and
577 verify the distribution against its message digest.
579 Build ImageMagick with this command:
581 $magick> rpmbuild --rebuild ImageMagick.src.rpm
583 After the build you, locate the RPMS folder and install the ImageMagick
584 binary RPM distribution:
586 $magick> rpm -ivh ImageMagick-7.0.0-?.*.rpm
588 MinGW-specific Build instructions
590 Although you can download and install delegate libraries yourself, many
591 are already available in the GnuWin32 distribution. Download and install
592 whichever delegate libraries you require such as JPEG, PNG, TIFF, etc. Make
593 sure you specify the development headers when you install a package. Next
596 $magick> tar jxvf ImageMagick-7.0.0-?.tar.bz2
597 $magick> cd ImageMagick-7.0.0
598 $magick> export CPPFLAGS="-Ic:/Progra~1/GnuWin32/include"
599 $magick> export LDFLAGS="-Lc:/Progra~1/GnuWin32/lib"
600 $magick> ./configure --without-perl
601 $magick> make $magick> sudo make install
603 Dealing with Unexpected Problems
605 Chances are the download, configure, build, and install of ImageMagick went
606 flawlessly as it is intended, however, certain systems and environments may
607 cause one or more steps to fail. We discuss a few problems we've run across
608 and how to take corrective action to ensure you have a working release
613 If the build complains about missing dependencies (e.g. .deps/source.PLO),
614 add --disable-dependency-tracking to your configure command line.
616 Some systems may fail to link at build time due to unresolved symbols. Try
617 adding the LDFLAGS to the configure command line:
619 $magick> configure LDFLAGS='-L/usr/local/lib -R/usr/local/lib'
621 Dynamic Linker Run-time Bindings
623 On some systems, ImageMagick may not find its shared library, libMagick.so. Try
624 running the ldconfig with the library path:
626 $magick> /sbin/ldconfig /usr/local/lib
628 Solaris and Linux systems have the ldd command which is useful to track which
629 libraries ImageMagick depends on:
631 $magick> ldd `which convert`
635 On occasion you may receive these warnings:
637 no decode delegate for this image format
638 no encode delegate for this image format
640 This exception indicates that an external delegate library or its headers
641 were not available when ImageMagick was built. To add support for the image
642 format, download and install the requisite delegate library and its header
643 files and reconfigure, rebuild, and reinstall ImageMagick. As an example,
644 lets add support for the JPEG image format. First we install the JPEG RPMS:
646 $magick> yum install libjpeg libjpeg-devel
648 Now reconfigure, rebuild, and reinstall ImageMagick. To verify JPEG is now
649 properly supported within ImageMagick, use this command:
651 $magick> identify -list format
653 You should see a mode of rw- associated with the JPEG tag. This mode means
654 the image can be read or written and can only support one image per image
659 If PerlMagick fails to link with a message similar to libperl.a is not found,
660 rerun configure with the --enable-shared or --enable-shared --with-modules