4 -----------------------------
8 - sanitize use of md5 throughout distribution.. Make a static
9 library for helping to develop modules that contains it and other
10 stuff. Also add sha-1 and ripemd-160 digest algorithms.
11 - once above is done. remove hacks from the secret@here module etc..
12 - remove prototype for gethostname in pam_access.c (Derrick)
13 - document PAM_INCOMPLETE changes
14 - verify that the PAM_INCOMPLETE interface is sensible. Can we
15 catch errors? should we permit item changing etc., between
16 pam_authenticate re-invocations?
17 - verify that the PAM_INCOMPLETE interface works (auth seems ok..)
18 - add PAM_INCOMPLETE support to modules (partially added to pam_pwdb)
20 - do we still need to remove openlog/closelog from modules..?
21 - auth and acct support in pam_cracklib, "yes, I know the password
22 you just typed was valid, I just don't think it was very strong..."
23 - add in the pam_cap and pam_netid modules
25 ====================================================================
26 Note, as of release 0.73, all checkins should be accompanied with a
27 Bug ID. The bug IDs relate to sourceforge IDs.. You can query the
28 related bug description with the following URL:
30 http://sourceforge.net/bugs/?func=detailbug&bug_id=XXXXX&group_id=6663
32 Where you should replace XXXXX with a bug-id.
33 ====================================================================
35 0.73: please submit patches for this section with actual code/doc
38 * removed static variable from pam_wheel (module should be thread safe
39 now). (Bug 112906 - agmorgan)
40 * added support for '/' symbols in pam_time and pam_group config files
41 (support for modern terminal devices). Fixed infinite loop problem
42 with '\\[^\n]' in these files. (Bug 116076 - agmorgan)
43 * avoid potential SIGPIPE when writing to helper binaries with (Bug
45 * replaced bogus logic in the pam_cracklib module for determining if
46 the replacement is too similar to the old password (Bug 115055 -
48 * added accessconf=<filename> feature to pam_access - request from
49 Aldrin Martoq and Meelis Roos (Bugs 111927,117240 - agmorgan)
50 * fix for pam_limit module not dealing with all limits Adam J. Richter
51 (Bug 119554 - agmorgan)
52 * comment fix describing fail_delay callback in _pam_types.h (Bug
54 * "likeauth" fix for pam_unix and pam_pwdb which (Bug 113596 - agmorgan)
55 * fix for pam_unix (support.c) to avoid segfault with NULL password
57 * fix to pam_unix_passwd: try repeatedly to get a lock on the password
58 file, instead of failing immediately (Bug 108845 - fix vorlon)
59 * fix to pam_shells: logged information was not formatted correctly
60 (extra comma) (Bug 111491 - fix vorlon)
61 * fix for C++ application support (Bug 111645 - fix agmorgan)
62 * fix for typo in pam_client.h (Bug 111648 - fix agmorgan)
63 * removal of -lpam from pam_mkhomedir Makefile (Bug 116380 - fix agmorgan)
64 * autoconf support [Task ID 15788, Bug ID 108297 - agmorgan with help!]
65 - bugfix for libpamc.h include file [Bug ID 117476 - agmorgan]
66 - bugfix for pam_filter.h inclusion [Bug ID 117474 - agmorgan]
68 0.72: Mon Dec 13 22:41:11 PST 1999
70 * patches from Debian (Ben Collins): pam_ftp supports event driven
71 conversations now; pwdb_chkpwd cleanup; pam_warn static compile fix;
72 user_db compiler warnings removed; debian defs file; pam_mail can
73 now be used as a session module
74 * ndbm compilation option for user_db module (fix explained by Richard Khoo)
75 * pam_cracklib bug fix
76 * packaging fixes & build from scratch stuff (Konst Bulatnikov & Frodo
78 * -ldl appended to the libpam.so compilation make rule. (Charles Seeger)
79 * Red Hat security patch for pam_pwdb forwarded by Debian! (Ben
80 Collins. Fix provided by Andrey as it caught the problem earlier in the
82 * heuristic to prevent leaking filedescriptors to an agent. [This needs
83 to be better supported perhaps by an additional libpamc API function?]
84 * pam_userdb segfault fix from (Ben Collins)
85 * PAM draft spec extras added at request of 'sen_ml'
87 0.71: Sun Nov 7 20:21:19 PST 1999
89 * added -lc to linker pass for pam_nologin module (glibc is weird).
90 * various header changes to lower the number of warnings on glibc
92 * merged a bunch of Debian fixes/patches/documentation (Ben Collins)
93 things touched: libpam (minor); doc/modules/pam_unix.sgml; pam_env
94 (plus docs); pam_mkhomedir (new module for new home directories on
95 the fly...); pam_motd (new module); pam_limits (adjust to match
96 docs); pam_issue (new module + doc) [Some of these were also
97 submitted by Thorsten Kukuk]
98 * small hack to lower the number of warnings that pam_client.h was
100 * debian and SuSE apparently can use the pam_ftp module, so
101 removed the obsolete comment about this from the docs. (Thorsten
104 0.70: Fri Oct 8 22:05:30 PDT 1999
106 * bug fix for parsing of value=action tokens in libpam/pam_misc.c was
107 segfaulting (Jan Rekorajski and independently Matthew Melvin)
108 * numerous fixes from Thorsten Kukuk (icluding much needed fixes for
109 bitrot in modules and some documentation) that got included in SuSE 6.2.
110 * reentrancy issues in pam_unix and pam_cracklib resolved (Jan Rekorajski)
111 * added hosts_equiv_rootok module option to pam_rhosts module (Tim Berger)
112 * added comment about 'expose_account' module argument to admin and
113 module writers' docs (request from Michael K Johnson).
114 * myriad of bug fixes for libpamc - library now built by default and
115 works with the biomouse fingerprint scanner agent/module
116 (distributed separately).
118 0.69: Sun Aug 1 20:25:37 PDT 1999
120 * c++ header #ifdef'ing for pam_appl.h (Tuomo Pyhala)
121 * added pam_userdb module (Cristian Gafton)
122 * minor documentation changes
123 * added in revised pam_client library (libpamc). Not installed by
124 default yet, since the example agent/module combo is not very secure.
125 * glibc fixes (Thorsten Kukuk, Adam J. Richter)
127 0.68: Sun Jul 4 23:04:13 PDT 1999
129 * completely new pam_unix module from Jan Rekorajski and Stephen Langasek
130 * Jan Rekorajski pam_mail - support for Maildir format mailboxes
131 * Jan Rekorajski pam_cracklib - support for old password comparison
132 * Jan Rekorajski bug fix for pam_pwdb setcred reusing auth retval
133 * Andrey's pam_tally patch (lstat -> fstat)
134 * Robert Milkowski's additional pam_tally patches to **change format of
135 /var/log/faillog** to one from shadow-utils, add new option "per_user"
136 for pam_tally module, failure time logging, support for fail_line
137 field, and support for fail_locktime field with new option
139 * pam_tally: clean up the tally application too.
140 * Marcin Korzonek added process priority settings to pam_limits (bonus
141 points for adding to documentation!)
142 * Andrey's pam_pwdb patch (cleanup + md5 endian fubar fix)
143 * more binary prompt preparations (make misc conv more compatible with spec)
144 * modified callback hook for fail delay to be more useful with event
145 driven applications (changed function prototype - suspect no one
146 will notice). Documented this in app developer guide.
147 * documentation for pam_access from Tim Berger
148 * syntax fixes for the documentation - a long time since I've built it :*(
149 added some more names to the CREDITS file.
151 0.67: Sat Jun 19 14:01:24 PDT 1999
153 * [dropped libpam_client - libpamc will be in the next release and
154 conforms to the developing spec in doc/specs/draft-morgan-pam.raw.
155 Sorry if you are keeping a PAM tree in CVS. CVS is a pain for
156 directories, but this directory was actually not referenced by
157 anything so the disruption should be light.]
158 * updates to pam_tally from Tim
159 * multiple updates from Stephen Langasek to pam_unix
160 * pam_filter had some trouble compiling (bug report from Sridhar)
161 * pam_wheel now attempts to identify the wheel group for the local
162 system instead of blindly assuming it is gid=0. In the case that
163 there is no "wheel" group, we default to assuming gid=0 is what was
164 meant - former behavior. (courtesy of Sridhar)
165 * NIS+ changes to pam_unix module from Dmitry O Panov
166 * hopefully, a fix for redefinition of LOG_AUTHPRIV (bug report Luke
167 Kenneth Casson Leighton)
168 * fix for minor typo in pam_wheel documentation (Jacek Kopecky)
169 * slightly more explanation of the [x=y] pam.conf syntax in the sys
172 0.66: Mon Dec 28 20:22:23 PST 1998 <morgan@linux.kernel.org>
174 * Started using cvs to keep track of changes to Linux-PAM. This will
175 likely break some of the automated building stuff (RPMs etc..).
176 * security bug fix to pam_unix and pam_tally from Andrey.
177 * modules make file is now more automatic. It should be possible to
178 unpack an external module in the modules directory and have it automatically
179 added to the build process. Also added a modules/download-all script
180 that will make such downloading easier. I'm happy to receive patches to
181 this file, informing the distribution of places from which to enrich itself.
182 * removed pam_system_log stuff. Thought about it long and hard: a
183 bad idea. If libc cannot guarantee a thread safe syslog, it needs
184 to be fixed and compatibility with other PAM libraries was
185 unnecessarily strained.
186 * SAG documentation changes: Seth Chaiklin
187 * rhosts: problems with NIS lookup failures with the root-uid check.
188 As a work-around, I've partially eliminated the need for the lookup
189 by supplying two new arguments: no_uid_check, superuser=<username>.
190 As a general rule this is more pluggable, since this module might be
191 used as an authentication scheme for a network service that does not
192 need root privilege...
193 * authenticate retval -> setcred for pam_pwdb (likeauth arg).
194 * pam_pwdb event driven support
195 * non openlog pam_listfile logging
196 * BUGFIX: close filedescriptor in pam_group and pam_time (Emmanuel Galanos)
197 * Chris Adams' mailhash change for pam_mail module
198 * fixed malloc failure check in pam_handlers.c (follow up to comment
200 * update to _pam_compat.h (Brad M. Garcia)
201 * support static modules in libpam again (Brad M. Garcia)
202 * libpam/pam_misc.c for egcs to grok the code (Brad M. Garcia)
203 * added a solaris-2.5.1 defs file (revived by Derrick J Brashear)
204 * pam_listfile logs failed attempts
205 * added a comment (Michael K Johnson pointed it out) about sgml2latex
206 having a new syntax. I'll make it the change real when I upgrade...
207 * a little more text to the RFC, spelling fix from William J Buffam.
208 * minor changes to pam_securetty to accommodate event driven support.
210 0.65: Sun Apr 5 22:29:09 PDT 1998 <morgan@linux.kernel.org>
212 * added event driven programming extensions to libpam
213 - added PAM_INCOMPLETE handling to libpam/pam_dispatch.c
214 - added PAM_CONV_AGAIN which is a new conversation response that
215 should be mapped to PAM_INCOMPLETE by the module.
216 - ensured that the pam_get_user() function can resume
217 - changes to pam_strerror to accommodate above return codes
218 - clean up _pam_former_state at pam_end()
219 - ensured that former state is correctly initialized
220 - added resumption tests to pam_authenticate(), pam_chauthtok()
221 - added PAM_FAIL_DELAY item for pausing on failure
223 * improved _pam_macros.h so that macros can be used as single commands
226 * reimplemented logging to avoid bad interactions with libc. Added
227 new functions, pam_[,v]system_log() to libpam's API. A programmer
228 can check for this function's availablility by checking if
229 HAVE_PAM_SYSTEM_LOG is #defined.
231 * removed the reduce conflict from pam_conv1 creation -- I can sleep
234 * made building of static and dynamic libpam separate. This is
235 towards making it possible to build both under Solaris (for Derrick)
237 * made USE_CRACKLIB a condition in unix module (Luke Kenneth Casson Leighton)
239 * automated (quiet) config installation (Andrey)
241 0.64: Thu Feb 19 23:30:24 PST 1998 Andrew Morgan <morgan@linux.kernel.org>
243 * miscellaneous patches for building under Solaris (Derrick J Brashear)
245 * removed STATIC support from a number of module Makefiles. Notably,
246 these modules are those that use libpwdb and caused difficulties
247 satisfying the build process. (Please submit patches to fix this...;)
249 * reomved the union for binary packet conversations from
250 (_pam_types.h). This is now completely implemented in libpam_client.
252 * Andrey's patch for working environment variable handling in
255 * made the libpam_misc conversation function a bit more flexible with
256 respect to binary conversations.
258 * added top level define (DEBUG_REL) for compiling in the form of
259 a debugging release. I use this on a Red Hat 4.2 system with little
260 chance of crashing the system as a whole. (Andrey has another
261 implementation of this -- with a spec file to match..)
263 0.63: Wed Jan 28 22:55:30 PST 1998 Andrew Morgan <morgan@linux.kernel.org>
265 * added libpam_client "convention" library. This makes explicit the
266 use of PAM_BINARY_PROMPT. It is a first cut, so don't take it too
267 seriously yet. Comments/suggestions for improvements are very
268 welcome. Note, this library does not compile by default. It will
269 be enabled when it is judged stable. The library comes with two
270 module/agent pairs and can be used with ssh using a patch available
271 from my pre-release directory [where you got this file.]
273 * backward compatibility patch for libpam/pam_handlers.c (PAM_IGNORE
274 was working with neither "requistie" nor "required") and a DEBUG'ing
275 compile time bug with pam_dispatch.c (Savochkin Andrey Vladimirovich)
277 * minor Makefile change from (Savochkin Andrey Vladimirovich)
279 * added pam_afsauth, pam_afspass, pam_restrict, and pam_syslog hooks
282 * pam_access use of uname(2) problematic (security problem
283 highlighted by Olaf Kirch).
285 * pam_listfile went a bit crazy reading group membersips (problem
286 highlighted by Olaf Kirch and patched independently by Cristian
287 Gafton and Savochkin Andrey Vladimirovich)
289 * compatibility hooks for solaris and hpux (Derrick J Brashear)
291 * 64 bit Linux/alpha bug fixed in pam_rhosts (Andrew D. Isaacson)
293 0.62: Wed Jan 14 14:10:55 PST 1998 Andrew Morgan <morgan@linux.kernel.org>
295 * Derrick J Brashear's patches: adds the HP stuff missed in the first
296 patch; adds SunOS support; adds support for the Solaris native ld
297 instead of requiring gnu ld.
299 * last line of .rhosts file need not contain a newline. (Bug reported by
302 0.61: Thu Jan 8 22:57:44 PST 1998 Andrew Morgan <morgan@linux.kernel.org>
304 * complete rewrite of the "control flag" logic. Formerly, we were
305 limited to four flags: requisite, required, sufficient, optional.
306 We can now use these keywords _and_ a great deal more besides.
307 The extra logic was inspired by Vipin Samar, a preliminary patch was
308 written by Andy Berkheimer, but I "had some ideas of my own" and
309 that's what I've actually included. The basic idea is to allow the
310 admin to custom build a control flag with a series of token=value
311 pairs inside square brackets. Eg., '[default=die success=ok]' which
312 is pretty close to a synonym for 'requisite'. I'll try to document it
313 better in the sys-admin guide but I'm pretty sure it is a change for
314 the better.... If what is in the sys-admin guide is not good enough
315 for you, just take a look at the source for libpam ;^)
317 0.59: Thu Jan 8 22:27:22 PST 1998 Andrew Morgan <morgan@linux.kernel.org>
319 * better handling of empty lines in .rhosts file. (Formerly, we asked
320 the nameserver about them!) Fix from Hugh Daschbach.
322 * _broke_some_binary_compatibility_ with previous versions to become
323 compliant with X/Open's XSSO spec. Specifically, this has been
324 by changing the prototype for pam_strerror().
326 * altered the convention for the conversation mechanism to agree
327 with that of Sun. (number of responses 'now=' number of messages
328 with help from Cristian for finding a bug.. Cristian also found a
329 nasty speradic segfault bug -- Thanks!)
331 * added NIS+ support to pam_unix_*
333 * fixed a "regular file checking" problem with the ~/.rhosts sanity
334 check. Added "privategroup" option to permit group write permission
335 on the ~/.rhosts file in the case that the group owner has the same
336 name as the authenticating user. :*) "promiscuous" and "suppress"
339 * added glibc compatibility to pam_rhosts_auth (protected __USE_MISC
340 with #ifndef since my libc already defines it!).
342 * Security fix from Savochkin Andrey Vladimirovich with suggested
343 modification from Olaf Seibert.
345 * preC contains mostly code clean-ups and a number of changes to
350 * pam_getenvlist() has a more robust definition (XSSO) than was previously
351 thought. It would seem that we no longer need pam_misc_copy_env()
352 which was there to provide the robustness that pam_getenvlist()
355 Accordingly, I have REMOVED the prototype from libpam_misc. (The
356 function, however, will remain in the library as a wrapper for
357 legacy apps, but will likely be removed from libpam_misc-1.0.) PLEASE
358 FIX YOUR APPS *BEFORE* WE GET THERE!
360 * Alexy Nogin reported garbage output from pam_env in the case of
361 a non-existent environment variable.
363 * 'fixed' pwdb compilation for pam_wheel. Not very cleanly
364 done.. Mmmm. Should really clean up the entire source tree...
366 * added prototypes for mapping functions
370 various constants have had there names changed. Numerical values have
371 been retained but be aware some source old modules/applications will
372 need to be fixed before recompilation.
376 * appended documentation to README for pam_rhosts module (Nicolai
379 * verified X/Open compatibility of header files - note, where we differ
380 it is at the level of compilation warnings and the use of 'const char *'
381 instead of 'char *'. Previously, Sun(X/open) have revised their spec
382 to be more 'const'-ervative in the light of comments from Linux-PAM
385 * Ooops! PAM_AUTHTOKEN_REQD should have been PAM_NEW_AUTHTOK_REQD.
387 changed: pam_pwdb(pam_unix_acct) (also bug fix for
388 _shadow_acct_mgmt_exp() return value), pam_stress,
389 libpam/pam_dispatch, blank, xsh.
391 * New: PAM_AUTHTOK_EXPIRED - password has expired.
393 * Ooops! PAM_CRED_ESTABLISH (etc.) should have been PAM_ESTABLISH_CRED
394 etc... (changed - this may break some people's modules - PLEASE TAKE
396 changed: pam_group, pam_mail, blank, xsh; module and appl
397 docs, pam_setcred manual page.
399 * renamed internal _pam_handle structure to be pam_handle as per XSSO.
401 * added PAM_RADIO_TYPE (for multiple choice input method). Also
402 added PAM_BINARY_{MSG,PROMPT} (for interaction out of sight of user
403 - this could be used for RSA type authentication but is currently
404 just there for experimental purposes). The _BINARY_ types are now
405 usable with hooks in the libpam_misc conversation function. Still
406 have to add PAM_RADIO_TYPE.
408 * added pam_access module (Alexei Nogin)
410 * added documentation for pam_lastlog. Also modified the module to
411 not (by default) print "welcome to your new account" when it cannot
412 find a utmp entry for the user (you can turn this on with the
415 * small correction to the pam_fail_delay manual page. Either the appl or
416 the modules header file will prototype this function.
418 * added "bigcrypt" (DEC's C2) algorithm(0) to pam_pwdb. (Andy Phillips)
420 * *BSD tweaking for various #include's etc. (pam_lastlog, pam_rhosts,
421 pam_wheel, libpam/pam_handlers). (Michael Smith)
423 * added configuration directory $SCONFIGED for module specific
426 * added two new "linked" man pages (pam.conf(8) and pam.d(8))
428 * included a reasonable default for /etc/pam.conf (which can be
429 translated to /etc/pam.d/* files with the pam_conv1 binary)
431 * fixed the names of the new configuration files in
432 conf/pam_conv1/pam_conv.y
436 * pam_lastlog fixed to handle UID in virgin part of /var/log/lastlog
437 (bug report from Ronald Wahl).
439 * grammar fix in pam_cracklib
441 * segfault avoided in pam_pwdb (getting user). Updating of passwords
442 that are directed to a "new" database are more robust now (bug noted
443 by Michael K. Johnson). Added "unix" module argument for migrating
444 passwords from another database to /etc/passwd. (documentation
445 updated). Removed "bad username []" warning for empty passwords -
446 on again if you supply the 'debug' module argument.
448 * ctrl-D respected in conversation function (libpam_misc)
450 * Removed -DPAM_FAIL_DELAY_ON from top-level Makefile. Nothing in
451 the distribution uses it. I guess this change happened a while
452 back, basically I'm trying to make the module parts of the
453 distribution "source compatible" with the RFC definition of PAM.
454 This implementation of PAM is a superset of that definition. I have
455 added the following symbols to the Linux-PAM header files:
457 PAM_DATA_SILENT (see _pam_types.h)
458 HAVE_PAM_FAIL_DELAY (see _pam_types.h)
459 PAM_DATA_REPLACE (see _pam_modules.h)
461 Any module (or application) that wants to utilize these features,
462 should check (#ifdef) for these tokens before using the associated
463 functionality. (Credit to Michael K. Johnson for pointing out my
464 earlier omission: not documenting this change :*)
466 * first stab at making modules more independent of full library
467 source. Modules converted:
473 * pam_env.c: #include <errno.h> added to ease GNU libc use. (Michael
476 * pam_unix_passwd fixes to shadow aging code (Eliot Frank)
478 * added README for pam_tally
480 0.57: Fri Apr 4 23:00:45 PST 1997 Andrew Morgan <morgan@parc.power.net>
482 * added "nodelay" argument to pam_pwdb. This can be used to turn off
483 the call to pam_fail_delay that takes effect when the user fails to
484 authenticate themself.
486 * added "suppress" argument to pam_rhosts_auth module. This will stop
487 printing the "rlogin failure message" when the user does not have a
490 * Extra fixes for FAKEROOT in Makefiles (Savochkin Andrey
493 * pam_tally added to tree courtesy of Tim Baverstock
495 * pam_rhosts_auth was failing to read NFS mounted .rhosts
496 files. (Fixed by Peter Allgeyer). Refixed and further enhanced
497 (netgroups) by Nicolai Langfeldt. [Credit also to G.Wilford for some
498 changes that were not actually included..]
500 * optional (#ifdef PAM_READ_BOTH_CONFS) support for parsing of pam.d/
501 AND pam.conf files (Elliot Lee).
503 * Added (and signed) Cristian's PGP key. (I've never met him, but I am
504 convinced the key belongs to the guy that is making the PAM rpms and
505 also producing libpwdb. Please note, I will not be signing anyone
506 else's key without a personal introduction..)
508 * fixed erroneous syslog warning in pam_listfile (Savochkin Andrey
509 Vladimirovich, whole file reformatted by Cristian)
511 * modified pam_securetty to return PAM_IGNORE in the case that the user's
512 name is not known to the system (was previously, PAM_USER_UNKNOWN). The
513 Rationale is that pam_securetty's sole purpose is to prevent superuser
514 login anywhere other than at the console. It is not its concern that the
515 user is unknown - only that they are _not_ root. Returning
516 PAM_IGNORE, however, insures that the pam_securetty can never be used to
517 "authenticate" a non-existent user. (Cristian Gafton with bug report from
520 * Modified pam_nologin to display the no-login message when the user
521 is not known. The return value in this case is still PAM_USER_UNKNOWN.
522 (Bug report from Cristian Gafton)
524 * Added NEED_LCKPWD for pam_unix/ This is used to define the locking
525 functions and should only be turned on if you don't have them in
528 * tidied up pam_lastlog and pam_pwdb: removed function that was never used.
530 * Note for package maintainers: I have added $(FAKEROOT) to the list of
531 environment variables. This should help greatly when you build PAM
532 in a subdirectory. I've gone through the tree and tried to make
533 everything compatible with it.
535 * added pam_env (courtesy of Dave Kinchlea)
537 * removed pam_passwd+ from the tree. It has not been maintained in a
538 long time and running a shell script was basically insecure. I've
539 indicated where you can pick up the source if you want it.
541 * #define HAVE_PAM_FAIL_DELAY . Applications can conditionally compile
542 with this if they want to see if the facility is available. It is
543 now always available. (corresponding compilation cleanups..)
545 * _pam_sanitize() added to pam_misc. It purges the PAM_AUTHTOK and
546 PAM_OLDAUTHTOK items. (calls replaced in pam_auth and pam_password)
548 * pam_rhosts now knows about the '+' entry. Since I think this is a
549 dangerous thing, I have required that the sysadmin supply the
550 "promiscuous" flag for it in the corresponding configuration file
553 * FULL_LINUX_PAM_SOURCE_TREE exported from the top level make file.
554 If you want to build a module, you can test for this to determine if
555 it should take its directions from above or supply default locations
556 for installation. Etc.
558 0.56: Sat Feb 15 12:21:01 PST 1997 <morgan@parc.power.net>
560 * pam_handlers.c can now interpret the pam.d/ service config tree:
561 - if /etc/pam.d/ exists /etc/pam.conf is IGNORED
562 (otherwise /etc/pam.conf is treated as before)
564 . config files are named (in lower case) by service-name
565 . config files have same syntax as /etc/pam.conf except
566 that the "service-name" field is not present. (there
567 are thus three manditory fields (and arguments are
570 module-type control-flag module-path optional-args...
574 * included conf/pam_conv1 for converting pam.conf to a pam.d/ version
575 1.0 directory tree. This program reads a pam.conf file on the
576 standard input stream and creates ./pam.d/ (in the local directory)
577 and fills it with ./pam.d/"service-name" files.
579 *> Note: It will fail if ./pam.d/ already exists.
581 PLEASE REPORT ANY BUGS WITH THIS CONVERSION PROGRAM... It currently
582 cannot retain comments from the old conf file, so take care to do this
583 by hand. Also, please email me with the fix that makes the
584 shift/reduce conflict go away...
586 * Added default module path to libpam for modules (see pam_handlers.c)
587 it makes use of Makfile defined symbol: DEFAULT_MODULE_PATH which is
588 inhereted from the defs/* variable $(SECUREDIR). Removed module
589 paths from the sample pam.conf file as they are no longer needed.
591 * pam_pwdb can now verify read protected passwords when it is not run
592 by root. This is via a helper binary that is setuid root.
594 * pam_permit now prompts for a username if it is not already determined
596 * pam_rhosts now honors "debug" and no longer hardwire's "root" as the
599 * pam_securetty now honors the "debug" flag
601 * trouble parsing extra spaces fixed in pam_time and pam_group
603 * added Michael K. Johnson's PGP key to the pgp.keys.asc list
605 * pam_end->env not being free()'d: fixed
607 * manuals relocated to section 3
609 * fixed bug in pam_mail.c, and enhanced to recognize '~' as a prefix
610 to indicate the $HOME of the user (courtesy David
611 Kinchlea). *Changed* from a "session" module to an "auth"
612 module. It cannot be used to authenticate a user, but it can be used
613 in setting credentials.
615 * fixed a stupid bug in pam_warn.. Only PAM_SERVICE was being read :*(
617 * pam_radius rewritten to exclusively make use of libpwdb. (minor fix
618 to Makefile for cleaning up - AGM)
620 * pam_limits extended to limit the total number of logins on a system
623 * libpam and libpam_misc use $(MAJOR_REL) and $(MINOR_REL) to set their
624 version numbers [defined in top level makefile]
626 * bugfix in sed command in defs/redhat.defs (AGM's fault)
628 * The following was related to a possibility of buffer overruns in
629 the syslogging code: removed fixed length array from syslogging
630 function in the following modules [capitalized the log identifier
631 so the sysadmin can "know" these are fixed on the local system],
633 pam_ftp, pam_stress, pam_rootok, pam_securetty,
634 pam_listfile, pam_shells, pam_warn, pam_lastlog
636 pam_unix_passwd (where it was definitely _not_ exploitable)
638 0.55: Sat Jan 4 14:43:02 PST 1997, Andrew Morgan <morgan@parc.power.net>
640 * added "requisite" control_flag to /etc/pam.conf syntax. [See
641 Sys. Admin. Guide for explanation] changes to pam_handlers.c
643 * completely new handling of garbled pam.conf lines. The modus
644 operandi now is to assume that any errors in the line are minor.
645 Errors of this sort should *most definitely* lead to the module
646 failing, however, just ignoring the line (as was the case
647 previously) can lead to gaping security holes(! Not foreseen by the
648 RFC). The "motivation" for the RFC's comments about ignoring garbled
649 lines is present in spirit in the new code: basically a garbled line
650 is treated like an instance of the pam_deny.so module.
651 changes to pam_handlers.c and pam_dispatch.c .
653 * patched libpam, to (a) call _pam_init_handlers from pam_start() and
654 (b) to log a text error if there are no modules defined for a given
655 service when a call to a module is requested. [pam_start() and
656 pam_dispatch() were changed].
658 * patched pam_securetty to deal with "/dev/" prefix on PAM_TTY item.
660 * reorganized the modules/Makefile to include *ALL* modules. It is now
661 the responsibility of the modules themselves to test whether they can
662 be compiled locally or not.
664 * modified pam_group to add to the getgroups() list rather than overwrite
665 it. [In the case of "HAVE_LIBPWDB" we use the pwdb_..() calls to
666 translate the group names.]. Module now pays attention to
669 * identified and removed bugs in field reading code of pam_time and
672 * Cristian's patches to pam_listfile module, corresponding change to
675 * I've discovered &ero; for sgml!
676 Added pam_time documentation to the admin guide.
678 * added manual pages: pam.8, pam_start.2(=pam_end.2),
679 pam_authenticate.2, pam_setcred.2, pam_strerror.2,
680 pam_open_session.2(=pam_close_session.2) and pam_chauthtok.2 .
684 - pam_mail (tells the user if they have any new mail
685 and sets their MAIL env variable)
686 - pam_lastlog (reports on the last time this user called
689 * new module hooks provided.
691 * added a timeout feature to the conversation function in
692 libpam_misc. Documented it in the application developers' guide.
694 * fixed bug in pam_misc_paste_env() function..
696 * slight modifications to wheel and rhosts writeup.
698 * more security issues added to module and application guides.
701 Things present but not mentioned in previous release (sorry)
703 * pam_pwdb module now resets the "last_change" entry before updating a
707 Sat Nov 30 19:30:20 PST 1996, Andrew Morgan <morgan@parc.power.net>
709 * added environment handling to libpam. involved change to _pam_types.h
710 also added supplementary functions to libpam_misc
712 * added pam_radius - Cristian
714 * slight speed up for pam_rhosts
716 * significantly enhanced sys-admin documentation (8 p -> 41 p in
717 PostScript). Added to other documentation too. Mostly the changes
718 in the other docs concern the new PAM-environment support, there is
719 also some coverage of libpam_misc in the App. Developers' guide.
721 * Cristian's patches to pam_limits and pam_pwdb. Fixing bugs. (MORE added)
723 * adopted Cristian's _pam_macros.h file to help with common macros and
724 debugging stuff, gone through tree tidying up debugging lines to use
727 - for consistency replaced DROP() with _pam_drop()
729 * commented memory debugging in top level makefile
731 * added the following modules
733 - pam_warn log information to syslog(3) about service application
734 - pam_ftp if user is 'ftp' then set PAM_RUSER/PAM_RHOST with password
735 (comment about nologin added to last release's notes)
737 * modified the pam_listfile module. It now declares a meaningful static
740 Sun Nov 10 13:26:39 PST 1996, Andrew Morgan <morgan@parc.power.net>
742 **PLEASE *RE*AMEND YOUR PERSONAL LINKS**
744 -------> http://parc.power.net/morgan/Linux-PAM/index.html <-------
746 **PLEASE *RE*AMEND YOUR PERSONAL LINKS**
748 A brief summary of what has changed:
750 * many modules have been modified to accomodate fixing the pam_get_user()
751 change. Please take note if you have a module in this distribution.
753 * pam_unix is now the pam_unix that Red Hat has been using and which
754 should be fairly well debugged.
756 - I've added some #ifdef's to make it compile for me, and also
757 updated it with respect to the libpam-0.53, so have a look at the
758 .../modules/pam_unix/Makefile to enable cracklib and shadow features
760 ** BECAUSE OF THIS, I cannot guarantee this code works as it **
761 ** did for Red Hat. Please test and report any problems. **
763 * the pam_unix of .52 (renamed to pam_pwdb) has been enhanced and made
764 more flexible with by implementing it with respect to the new
765 "Password Database Library" see
767 http://parc.power.net/morgan/libpwdb/index.html
769 modules included in this release that require this library to
770 function are the following:
772 - pam_pwdb (ne pam_unix-0.52 + some enhancements)
777 * Added some optional code for memory debugging. In order to support
778 this you have to enable MEMORY_DEBUG in the top level makefile and
779 also #define MEMORY_DEBUG in your applications when they are compiled.
780 The extra code resides in libpam (compiled if MEMORY_DEBUG is defined)
781 and the macros for malloc etc. are to be found at the end of
784 * used above code to locate two memory leaks in pam_unix module and two
785 in libpam (pam_handlers.h)
787 * pam_get_user() now sets the PAM_USER item. After reading the Sun
788 manual page again, it was clear that it should do this. Various
789 modules have been assuming this and now I have modified most of them
790 to account for this change. Additionally, pam_get_user() is now
791 located in the module include file; modules are supposed to be the
792 ones that use it(!) [Note, this is explicitly contrary to the Sun
793 manual page, but in the spirit of the Linux distribution to date.]
795 * replaced -D"LINUX" with -D"LINUX_PAM" as this is more explicit and less
796 likely to be confused with -D"linux".
797 Also, modified the libpam #include files to behave more like the Sun
798 ones #ifndef LINUX_PAM.
800 * removed <bf/ .. / from documentation titles. This was not giving
801 politically correct html..
803 ----- My vvvvvvvvvvvvvvvvvvv was a long time ago ;*] -----
805 Wed Sep 4 23:57:19 PDT 1996 (Andrew Morgan <morgan@physics.ucla.edu>
807 0. Before I begin, Linux-PAM has a new primary distribution site (kindly
808 donated by Power Net Inc., Los Angeles)
810 **PLEASE AMMEND YOUR PERSONAL LINKS**
812 -------> http://www.power.net/morgan/Linux-PAM <-------
814 **PLEASE AMMEND YOUR PERSONAL LINKS**
816 1. I'm hoping to make the next release a bug-fix release... So please find
819 2. here are the changes for .52:
821 * minor changes to module documentation [Incidently, it is now
822 available on-line from the WWW page above]. More changes to follow in
823 the next two releases. PLEASE EMAIL me or the list if there is
824 anything that isn't clear!
826 * completely changed the unix module. Now a single module for all four
827 management groups (this meant that I could define all functions as
828 static that were not part of the pam_sm_... scheme. AGM)
830 - Shadow support added
831 PASSWD - Elliot's account management included, and enhanced by Cristian Gafton.
832 - MD5 password support added by Cristian Gafton.
833 - maxtries for authentication now enforced.
834 - Password changing function in pam_unix now works!
835 Although obviously, I'm not going to *guarantee* it ;^) .
836 - stole Marek's locking code from the Red Hat unix module.
837 [ If you like you can #ifdef it in or out ... ]
839 You can configure the module more from its Makefile in
840 0.52/modules/pam_unix/
842 If you are nervous that it will destroy your /etc/passwd or shadow
843 files then EDIT the 0.52/modules/pam_unix/pam_unix_pass.-c file.
844 Here is the warning comment from this file...
846 -------------8<-----------------
849 * Uncomment the following #define if you are paranoid, and do not
850 * want to risk losing your /etc/passwd or shadow files.
851 * It works for me (AGM) but there are no guarantees.
855 /* #define TMP__FILE */
856 ------------->8-----------------
858 *** If anyone has any trouble, please *say*. Your problem will be
859 fixed in the next release. Also please feel free to scour the
860 code for race conditions etc...
862 [* The above change requires that you purge your /usr/lib/security
863 directory of the old pam_unix_XXX.so modules: they will NOT be deleted
864 with a 'make remove'.]
866 * the prototype for the cleanup function supplied to pam_set_data used
867 to return "int". According to Sun it should be "void". CHANGED.
869 * added some definitions for the 'error_status' mask values that are
870 passed to the cleanup function associated with each
871 module-data-item. These numbers were needed to keep up with changing
872 a data item (see for example the code in pam_unix/support.-c that
873 manages the maximum number of retries so far). Will see what Sun says
874 (current indications are positive); this may be undone before 1.0 is
875 released. Here are the definitions (from pam_modules.h).
877 #define PAM_DATA_SILENT 0x40000000 /* used to suppress messages... */
878 #define PAM_DATA_REPLACE 0x20000000 /* used when replacing a data item */
880 * Changed the .../conf/pam.conf file. It now points to the new
881 pam_unix module for 'su' and 'passwd' [can get these as SimpleApps --
882 I use them for testing. A more extensive selection of applications is
883 available from Red Hat...]
885 * corrected a bug in pam_dispatch. Basically, the problem was that if
886 all the modules were "sufficient" then the return value for this
887 function was never set. The net effect was that _pam_dispatch_aux
888 returned success when all the sufficient modules failed. :^( I think
889 this is the correct fix to a problem that the Red Hat folks had
892 sopwith* Removed advisory locking from libpam (thanks for the POSIX patch
893 goes to Josh Wilmes's, my apologies for not using it in the
894 end.). Advisory locking did not seem sufficiently secure for libpam.
895 Thanks to Werner Almesberger for identifying the corresponding "denial
896 of service attack". :*(
898 * related to fix, have introduced a lock file /var/lock/subsys/PAM
899 that can be used to indicate the system should pay attention to
900 advisory locking on /etc/pam.conf file. To implement this you need to
901 define PAM_LOCKING though. (see .52/libpam)
903 * modified pam_fail_delay() function. Couldn't find the "not working"
904 problem indicated by Michael, but modified it to do pseudo-random
905 delays based on the values indicated by pam_fail_delay() -- the
906 function "that may eventually go away"... Although Sun is warming to
909 * new modules include:
911 pam_shells - authentication for users with a shell listed in
912 /etc/shells. Erik Troan <ewt@redhat.com>
914 pam_listfile - authentication based on the contents of files.
915 Set to be more general than the above in the
916 future. UNTESTED. Elliot Lee <@redhat.com>
917 [Note, this module compiles with a non-trivial
920 Thu Aug 8 22:32:15 PDT 1996 (Andrew Morgan <morgan@physics.ucla.edu>)
922 * modified makefiles to take more of their installation instructions
923 from the top level makefile. Desired for integration into the Debian
924 distribution, and generally a good idea.
926 * fixed memory arithmetic in pam_handlers
927 -- still need to track down why failure to load modules can lead to
928 authentication succeding..
930 * added tags for new modules (smartcards from Alex -- just a promise
931 at this stage) and a new module from Elliot Lee; pam_securetty
933 * I have not had time to smooth out the wrinkles with it, but Alex's
934 pam_unix modifications are provided in pam_unix-alex (in the modules
935 directory) they will not be compiled by 'make all' and I can't even
936 say if they do compile... I will try to look at them for .52 but, in
937 the mean time please feel free to study/fix/discuss what is there.
939 * pam_rhosts module. Removed code for manually setting the ruser
940 etc. This was not very secure.
942 * [remade .ps docs to be in letter format -- my printer complains
945 Sunday July, 7 12:45:00 PST 1996 (Andrew Morgan <morgan@physics.ucla.edu>)
947 * No longer accompanying the Linux-PAM release with apps installed.
948 [Will provide what was here in a separate package.. (soon)
949 lib Also see http://www.redhat.com/pam for some more (in .rpm form...)]
951 * renamed libmisc to libpam_misc. It is currently configured to only compile
952 the static library. For some strange reason (perhaps someone can
953 investigate) my Linux 2.0.0 kernel with RedHat 3.0.3 system
954 segfaults when I compile it to be a dynamic library. The segfault
955 seems to be inside the call to the ** dl_XXX ** function...!?
957 There is a simple flag in the libpam_misc/Makefile to turn on dynamic
960 * Added a little unofficial code for delay support in libpam (will probably
961 disappear later..) There is some documentation for it in the pam_modules
962 doc now. That will obviously go too.
964 * rewritten pam_time to use *logic* to specify the stringing together of
965 users/times/terminals etc.. (what was there before was superficially
966 logical but basically un-predictable!)
968 * added pam_group. Its syntax is almost identical to pam_time but it
969 has another field added; a list of groups to make the user a member
970 of if they pass the previous tests. It seems to not co-exist too well
971 with the groups in the /etc/group but I hope to have that fixed by
974 * minor re-formatting of pam_modules documentation
976 * removed ...// since it wasn't being used and didn't look like it
979 GCCSunday 23 22:35:00 PST 1996 (Andrew Morgan <morgan@physics.ucla.edu>)
981 * The major change is the addition of a new module: pam_time for
982 restricting access on terminals at given times for indicated users
983 it comes with its own configuration file /etc/security/time.conf
984 and the sample file simply restricts 'you' from satisfying the blank
985 application if they try to use blank from any tty*
987 * Small changes include
988 - altered pam.conf to demonstrate above new module (try typing username: you)
989 - very minor changes to the docs (pam_appl and pam_modules)
991 Saturday June 2 01:40:00 PST 1996 (Andrew Morgan <morgan@physics.ucla.edu>)
993 *** PLEASE READ THE README, it has changed ***
995 * NOTE, 'su' exhibits a "system error", when static linking is
996 used. This is because the pam_unix_... module currently only has
997 partial static linking support. This is likely to change on Monday
998 June 3, when Alex makes his latest version availible. I will include
999 the updated module in next release.
1003 * modified the way in which libpam/pam_modules.h defines prototypes for
1004 the pam_sm_ functions. Now the module must declare which functions it
1005 is to provide *before* the #include <security/pam_modules.h> line.
1006 (for contrasting examples, see the pam_deny and pam_rootok modules)
1007 This removed the ugly hack of defining functions that are never called
1008 to overcome warnings... This seems much tidier.
1009 insterted* updated the TODO list. (changed mailing list address)
1010 * updated README in .../modules to reflect modifications to static
1011 compliation protocol
1012 * modified the pam_modules documentation to describe this.
1013 * corrected last argument of pam_get_item( ... ) in
1014 pam_appl/modules.sgml, to "const void **".
1015 * altered GNU GPL's in the documentation, and various other parts of
1016 the distribution. *Please check* that any code you are responsible for
1018 * Added ./Copyright (please check that it is acceptable)
1019 * updated ./README to make current and indicate the new mailing list
1021 * have completely rewritten pam_filter. It now runs modular filter
1022 executables (stored in /usr/sbin/pam_filter/) This should make it
1023 trivial for others to write their own filters.. If you want yours
1024 included in the distribution please email the list/me.
1025 * changes to libpam; there was a silly bug with multiple arguments on a
1026 pam.conf line that was broken with a '\<LF>'.
1027 * 'su' rearranged code (to make better use of PAM)
1028 *Also* now uses POSIX signals--this should help the Alpha port.
1029 * 'passwd' now uses getlogin() to determine who's passwords to change.
1031 Sunday May 26 9:00:00 PST 1996 (Andrew Morgan <morgan@physics.ucla.edu>)
1033 * fixed module makefiles to create needed dynamic/static subdirectories
1035 Saturday May 25 20:30:27.8 PST 1996 (Andrew Morgan <morgan@physics.ucla.edu>)
1037 * LOTS has changed regarding how the modules/libpam are built.
1038 * Michael's mostly complete changes for static support--see below
1039 (Andrew got a little carried away and automated the static linking
1040 of modules---bugs are likely mine ;( )
1041 * Thanks mostly to Michael, libpam now compiles without a single warning :^]
1042 * made static modules/library optional.
1043 CFLAGS* added 'make sterile' to top level makefile. This does extraclean and remove
1044 * added Michael and Joseph to documentation credits (and a subsection for
1045 future documentation of static module support in pam_modules.sgml)
1046 * libpam; many changes to makefiles and also automated the inclusion of
1047 static module objects in pam_static.c
1048 * modified modules for automated static/dynamic support. Added static &
1049 dynamic subdirectories, as instructed by Michael
1050 * removed an annoying syslog message from pam_filter: "parent exited.."
1051 * updated todo list (anyone know anything about svgalib/X? we probably should
1052 have some support for these...)
1054 Friday May 24 16:30:15 EDT 1996 (Michael K. Johnson <johnsonm@redhat.com>)
1056 * Added first (incomplete) cut at static support.
1058 . changes in libpam, including a new file, pam_static.c
1059 . changes to modules including exporting struct of function pointers
1060 . static and dynamic linking can be combined
1061 . right now, the only working combinations are just dynamic
1062 linking and dynamic libpam.so with static modules linked
1063 into libpam.so. That's on the list of things to fix...
1064 . modules are built differently depending on whether they
1065 are static or dynamic. Therefore, there are two directories
1066 under each module directory, one for static, and one for
1068 * Fixed random brokenness in the Makefiles. [ foo -nt bar ] is
1069 rather redundant in a makefile, for instance. Also, passing
1070 on the command line is broken because it cannot be
1071 overridden in any way (even adding important parts) in lower-level
1073 * Unfortunately, fixing some of the brokenness meant that I used
1074 GNU-specific stuff. However, I *think* that there was GNU-specific
1075 stuff already. And I think that we should just use the GNU
1076 extensions, because any platform that GNU make doesn't port to
1077 easily will be hard to port to anyway. It also won't be likely
1078 passwd to handle autoconf, which was Ted's suggestion for getting
1079 around limitations in standard make...
1080 For now, I suggest that we just use some simple GNU-specific
1083 Monday May 20 22:00:00 PST 1996 (Andrew Morgan <morgan@physics.ucla.edu>)
1085 * added some text to pam_modules.sgml
1086 * corrected Marek's name in all documentation
1087 * made pam_stress conform to chauthtok conventions -- ie can now request
1088 old password before proceeding.
1089 * included Alex's latest unix module
1090 * included Al's + password strength checking module
1091 * included pam_rootok module
1092 * fixed too many bugs in libpam.. all subtly related to the argument lists
1093 or use of syslog. Added more debugging lines here too.
1094 * fixed the pam.conf file
1095 * deleted pam_test module. It is pretty old and basically superceeded
1098 Friday May 9 1:00:00 PST 1996 (Andrew Morgan <morgan@physics.ucla.edu>)
1100 * updated documentaion, added Al Longyear to credits and corrected the
1101 spelling of Jeff's name(!). Most changes to pam.sgml (even added a figure!)
1102 * new module pam_rhosts_auth (from Al Longyear)
1103 * new apps rlogind and ftpd (a patch) from Al.
1104 * modified 'passwd' to not call pam_authenticate (note, none of the
1105 modules respect this convention yet!)
1106 * fixed bug in libpam that caused trouble if the last line of a
1107 pam.conf file ends with a module name and no newline character
1108 * also made more compatable with documentation, in that bad lines in
1109 pam.conf are now ignored rather than causing libpam to return an
1111 * libpam now overwrites the AUTHTOKs when returning from
1112 pam_authenticate and pam_chauthtok calls (as per Sun/RFC too)
1113 * libpam is now installed as libpam.so.XXX in a way that ldconfig can
1117 Wednesday May 1 22:00:00 PST 1996 (Andrew Morgan <morgan@physics.ucla.edu>)
1119 * removed .../test directory, use .../examples from now on.
1120 * added .../apps directory for fully functional applications
1121 - the apps directory contains directories that actually contain the apps.
1122 the idea is to make application compilation conditional on the presence
1123 of the directory. Note, there are entries in the Makefile for
1124 'login' and 'ftpd' that are ready for installation... Email me if
1125 you want to reserve a directory name for an application you are
1127 * similar changes to .../modules makefile [entries for pam_skey and
1128 pam_kerberos created---awaiting the directories.] Email me if you
1129 want to register another module...
1130 * minor changes to docs.. Not really worth reprinting them quite yet!
1132 * added misc_conv to libmisc. it is a generic conversation function
1133 for text based applications. [would be nice to see someone create
1134 an Xlib and/or svgalib version]
1135 * fixed ctrl-z/c bug with pam_filter module [try xsh with the default
1137 * added 'required' argument to 'pam_stress' module.
1138 * added a TODO list... other suggestions to the list please.
1140 Saturday April 7 00:00:00 PST 1996 ( Andrew Morgan <morgan@physics.ucla.edu> )
1142 * Alex and Marek please note I have altered _pam_auth_unix a little, to
1143 make it get the passwords with the "proper method" (and also fixed it
1144 to not have as many compiler warnings)
1145 * updated the conf/pam.conf file
1146 * added new example application examples/xsh.c (like blank but invokes
1148 * Marc's patches for examples/blank.c (and AGM's too)
1149 * fixed stacking of modules in libpam/pam_handlers.c
1150 * fixed RESETing in libpam/pam_item.c
1151 * added new module modules/pam_filter/ to demonstrate the possibility
1152 of inserting an arbitrary filter between the terminal and the
1153 application that could do customized logging etc... (see use of
1154 bin/xsh as defined in conf/pam.conf)
1157 Saturday March 16 19:00:00 PST 1996 ( Andrew Morgan <morgan@physics.ucla.edu> )
1159 These notes are for 0.3 I don't think I've left anything important
1160 out, but I will use emacs 'C-x v a' next time! (Thanks Jeff)
1162 * not much has changed with the functionality of the Linux-PAM lib
1164 - pam_password calls module twice with different arguments
1165 - added const to some of the function arguments
1166 - added PAM_MAX_MES_ to <security/_pam_types.h>
1167 - was a lot over zealous about purging old passwords...
1168 I have removed much of this from source to make it
1169 more compatible with SUN.
1170 - moved some PAM_... tokens to pam_modules.h from _pam_types.h
1171 (no-one should notice)
1173 * added three modules: pam_permit pam_deny pam_stress
1174 no prizes for guessing what the first two do. The third is
1175 a reasonably complete (functional) module. Is intended for testing
1178 * fixed a few pieces of examples/blank.c so that it works (with
1181 * ammended the documentation. Looking better, but suggestions/comments
1184 Sunday March 10 10:50:00 PST 1996 ( Andrew Morgan <morgan@physics.ucla.edu> )
1186 These notes are for Linux-PAM release 0.21. They cover what's changed
1187 since I relased 0.2.
1190 * substantially changed ./README
1191 * fixed bug reading \\\n in pam.conf file
1192 * small changes to documentation
1193 * added `blank' application to ./examples (could be viewed as
1194 a `Linux-PAM aware' application template.)
1195 * oops. now including pam_passwd.o and pam_session.o in pamlib.so
1196 * compute md5 checksums for all the source when making a release
1197 - added `make check' and `make RCScheck' to compute md5 checksums
1198 * create a second tar file with all the RCS files in.
1199 * removed the .html and .txt docs, supplying sgml sources instead.
1200 - see README for info on where to get .ps files
1202 Thursday March 6 0:44:?? PST 1996 ( Andrew Morgan <morgan@physics.ucla.edu> )
1204 These notes are for Linux-PAM release 0.2. They cover what's changed
1205 since Marc Ewing relased 0.1.
1207 **** Please note. All of the directories in this release have been modified
1208 **** slightly to conform to the new pamlib. A couple of new directories have
1209 **** been added. As well as some documentation. If some of your code
1210 **** was in the previous release. Feel free to update it, but please
1211 **** try to conform to the new headers and Makefiles.
1213 * Andrew Morgan (morgan@physics.ucla.edu) is making this release
1214 availible, Marc has been busy...!
1216 * Marc's pam-0.1/lib has been (quietly) enhanced and integrated into
1217 Alex Yurie's collected tree of library and module code
1218 (linux-pam.prop.1.tar.gz). Most of the changes are to do with error
1219 checking. Some more robustness in the reading of the pam.conf file
1220 and the addition of the pam_get_user() function.
1222 * The pam_*.h files have been reorganized to logically enforce the
1223 separation of modules from applications. [Don't panic! Apart from
1224 changing references of the form
1226 #include "pam_appl.h"
1230 #include <security/pam_appl.h>
1232 The reorganization should be backwardly compatable (ie. a module
1233 written for SUN will be as compatable as it was before with the
1234 previous version ;)~ ]
1236 (All of the source in this tree now conforms to this scheme...)
1238 The new reorganization means that modules can be compiled with a
1239 single header, <security/pam_modules.h>, and applications with
1240 <security/pam_appl.h>.
1242 * I have tried to remove all the compiler warnings from the updated
1243 "pamlib/*.c" files. On my system, (with a slightly modified <dlfcn.h>
1244 email me if it interests you..) there are only two warnings that
1245 remain: they are that ansi does not permit void --> fn ptr
1246 assignment. K&Rv2 doesn't mention this....? As a matter of principle,
1247 if anyone knows how to get rid of that warning... please
1248 tell. Thanks! "-pedantic"
1250 * you can "make all" as a plain user, but
1252 * to "make install" you must be root. The include files are placed in
1253 /usr/include/security. The libpam.so library is installed in /usr/lib
1254 and the modules in /usr/lib/security. The two test binaries
1255 are installed in the Linux-PAM-0.2/bin directory and a chance is given to
1256 replace your /etc/pam.conf file with the one in Linux-PAM-0.2/conf.
1258 * I have included some documentation (pretty preliminary at the
1259 moment) which I have been working on in .../doc .
1261 I have had a little trouble with the modules, but atleast there are no
1262 segfaults! Please try it out and discuss your results... I actually
1263 hope it all works for you. But, Email any bugs/suggestions to the
1264 Linux-PAM list: linux-pam@mit.edu .....
1269 (morgan@physics.ucla.edu)
1272 Sat Feb 17 17:30:24 EST 1996 (Alexander O. Yuriev alex@bach.cis.temple.edu)
1274 * conf directory created with example of pam_conf
1275 * stable code from pam_unix is added to modules/pam_unix
1276 * test/test.c now requests username and password and attempts
1277 to perform authentication